Convert Standard Analog VGA to PAL / NTSC / RS-170 VGACOMP-IS

VGACOMP-IS
VGA-to-PAL/NTSC/RS-170 standalone scan converter
The VGACOMP-IS is an intelligent stand-alone scan
converter that accepts VGA signals at up to 1920x1080
and converts them to broadcast quality PAL/NTSC/RS-170
composite video.
Convert
Standard
Analog
VGA
The VGACOMP-IS features high speed analog signal
digitization, video scaling, frame rate conversion and a timing
to
generator. Processing and scaling is performed in the digital
domain for maximum quality before the video data is sent to
a digital video encoder for conversion to broadcast quality
composite PAL/NTSC/RS-170. This provides seamless and
automatic conversion of progressive analog VGA to PAL/
NTSC/RS-170 composite video.
The VGACOMP-IS is an intelligent stand -alone device with it’s
own on-board MPU and does not require a host CPU or any
driver software. For mechanical convenience the module can
be mounted on a PCI-104 stack without consuming host CPU
resources.
Rev A.00
Subject to change without notification
Advanced Micro Peripherals Ltd
Cambridge, CB6 2HY, England
Tel (+44) 1353 659500
Fax (+44) 1353 659600
[email protected]
http://www.ampltd.com
Advanced Micro Peripherals Inc
New York, NY10016, USA
Tel (+1) 212 951 7205
Fax (+1) 212 951 7206
[email protected]
http://www.amp-usa.com
PAL / NTSC / RS-170
VGACOMP-IS
VGA-to-PAL/NTSC/RS-170 standalone scan converter
On-board
MPU
for
Intelligent,
Stand-alone
Applications
Operation
Aerospace instrumentation
Instrument panel
Multi-function display (MFD)
Situational Awareness
Remote Video Surveillance
Naval/Marine instrumentation
Border Security
Traffic Monitoring and Control
Video Acquisition and Analytics
Advanced Micro Peripherals Ltd
Cambridge, CB6 2HY, England
Tel (+44) 1353 659500
Fax (+44) 1353 659600
[email protected]
http://www.ampltd.com
Advanced Micro Peripherals Inc
New York, NY10016, USA
Tel (+1) 212 951 7205
Fax (+1) 212 951 7206
[email protected]
http://www.amp-usa.com
VGACOMP-IS
VGA-to-PAL/NTSC/RS-170 standalone scan converter
Aerospace and
Marine
VGACOMP-IS Functional Diagram
Instrumentation
Border
Security
Features
Converts standard analog VGA to PAL/NTSC/RS -170
Supports VGA input up to 1920x1080
Composite PAL, NTSC, or RS170 output
Single +5V power supply
Stand-alone operation
Operating system neutral
Standard PCI-104 mechanical form factor
Advanced Micro Peripherals Ltd
Cambridge, CB6 2HY, England
Tel (+44) 1353 659500
Fax (+44) 1353 659600
[email protected]
http://www.ampltd.com
Advanced Micro Peripherals Inc
New York, NY10016, USA
Tel (+1) 212 951 7205
Fax (+1) 212 951 7206
[email protected]
http://www.amp-usa.com
VGACOMP-IS
Rev A.00
Technical Specification
VGA-to-PAL/NTSC/RS-170 standalone scan converter
Analog Video Input
Ordering Information
Progressive scan RGB, H-Sync, V-Sync (Analog VGA)
3x 10bit analog-to-digital converters
Up to 1920x1080 VGA input resolution
VGACOMP-IS-PAL
VGA to PAL scan converter (0˚C to 60˚C)
VGACOMP-IS-PAL-EXT
VGA to PAL scan converter (-40˚C to +85˚C)
Analog Video Output
Supported output standards:
CCIR601-NTSC
RS170
CCIR-PAL
PAL-B, PAL-G, PAL-H, PAL-I
10bit digital-to-analog conversion
Composite video output
VGACOMP-IS-NTSC
VGA to NTSC scan converter (0 to 60˚C)
VGACOMP-IS-NTSC
VGA to NTSC scan converter (-40˚C to +85˚C)
Miscellaneous
Intelligent stand-alone module, does not require host computer
Standard 3.6 x 3.8in PCI-104 form factor
Mechanical mounting for PCI-104 stack
Single +5V supply
Operating temp 0˚C to 60˚C
Operating temp –40˚C to +85˚C (extended temp option)
VGACOMP-IS-RS170
VGA to RS170 scan converter (0˚C to +60˚C)
VGACOMP-IS-RS170-EXT
VGA to RS170 scan converter (-40˚C to +85˚C)
Cable-VGACOMP
Cable set for VGACOMP-IS
(1x VGA input cable, 1x u.FL-to-BNC coax output cable)
VGACOMP-IS
Advanced Micro Peripherals Ltd
Cambridge, CB6 2HY, England
Tel (+44) 1353 659500
Fax (+44) 1353 659600
[email protected]
http://www.ampltd.com
Advanced Micro Peripherals Inc
New York, NY10016, USA
Tel (+1) 212 951 7205
Fax (+1) 212 951 7206
[email protected]
http://www.amp-usa.com