Jabra GN1210 Datasheet

Simple connectivity.

Greater freedom of choice.

The Jabra GN1210 cord is the solution for carbon-based telephone systems where microphone amplification is needed.

The Jabra GN1210 cord has been designed to offer ample amplification at an affordable price.

• Works with most carbon-based telephone systems (incl. Avaya Callmaster III and IV)

• Microphone amplification to boost transmit level

• Plug-and-play installation with simple slide adjustment

Now your choice of headset is no longer limited by the telephone system. With the Jabra GN1210 cord you are able to connect a range of GN’s most popular professional Jabra headsets dedicated for all-day use in even the toughest environments. And best of all, the Jabra GN1210 cord represents an extremely affordable solution to amplification for carbon-based systems.

Jabra GN1210 features eight separate amplification levels at 4-6 dB increments adding up to a total of 32 dB. This ensures that no carbon-based telephone system sound-level is too high or too low. Simply connect the Jabra GN1210 cord and Jabra headset from GN through the Quick Disconnect (QD) plug and set the amplification level to your preference.

The Jabra GN1210 is available in three variants:

• QD to RJ9 with straight cord

• QD to RJ11 with straight cord

• QD to PJ327 with straight cord

Jabra GN1210 PJ327

Jabra GN1210 RJ9/RJ11

Features

Simple 8-position slide adjustment

Standard connectors (RJ9, RJ11 and PJ327)

Standard GN Quick Disconnect plug to headset

Straight 80 cm / 31.5 inch cord

Electrical specifications

DC Voltage

Maximum Voltage

Minimum Voltage

Nominal Voltage

Maximum Current

Minimum Current

10v DC

4.5v DC

5v DC

50 mA

1.0 mA

Benefits

No need for a user manual; simply slide until receiving end can hear you clearly.

Connects to virtually all telephones using a standard modular plug.

Guaranteed to work with our most popular headsets equipped with Quick Disconnect.

Longer than many standard cords, yet at a competitive price.

Characteristics

AC Output Voltage

Insertion Gain

Bias Voltage

500mV RMS max

51 dB at position 1, 42 dB at position 3, 14 dB at position 8

1.9v DC Nom, Min 1.4v DC : Max 2.4v DC (microphone input)

Jabra GN1210 PJ327

Jabra GN1210 RJ9/RJ11

© 2007 GN A/S. All rights reserved. Jabra® is a registered trademark of GN A/S. All other trademarks included herein are the property of their respective owners.

(Design and specifications subject to change without notice)