Soniq CUH103K Instruction manual

SONMIG
HOTLINE
* AUSTRALIA = :1300 765 663
« NEW ZEALAND:0800 100 236
MD150707-01 :
Printed in China WWW.SONIG.com
Ultra slim USB 3.0 7 port hub
Instruction Manual
CUH103K-AU SONIQ
SONI&
| _Packina Content y Content
SONIQ CUH103K 1PC
100cm. USB3.0 Cable 1PC
Power Adaptor 1PC
Warranty Card 1PC
User Manual 1PC
Specification
Model Number
SONIQ CUH103K
Product Name
Ultra slim USB 3.0 7 port hub
1 X USB 3.0 Type A Female
Input 1 X DC-IN
Output 7 X USB 3.0 Type A Female
Dimension 205 X40 X 23 mm
Weight 164 g
Material Aluminium
Color Available in Black, Blue, Gray, Green, Orange, Pink,
Purple, Red and Silver
OS Supported Windows,Mac OS and Linux
Devices Supported
Flash Drive, External Hard Drive, Cell Phone, Tablet,
Camera, Card Reader, MP3, MP4, Mouse ,
Keyboard, Wireless Adaptor and any USB Peripherals
Certified
CE and FCC
LED
Power and Activity
Product Features
e Add 7 USB 3.0 Ports to your Computer in one easy step
e Fully-Integrated USB 3.0 Controller offers Super Speed Connection of up to 5GB
per second
e The slim and stylishn Anodised Aluminium casing offers excellent protection and
high portability
E -1- 9
SoniQ
Product Features
e The included 100cm. Detachable USB 3.0 Cable and Premium Power Adaptor
allows for Easy and Reliable Connectivity.
e Plug and play, No additional power adaptor or driver is needed
* Compatible with any USB3.0, USB2.0, USB1.1 and USB1.0 Devices
e Compatible with any Windows, MAC or Linux Computer
Panel Introduction
cie
Power У
Switch DC-IN USB 3.0
Line-In
[ — —= [=
USB3.0 USB3.0 USB3.0 USB3.0 USB3.0 USB3.0 USB3.0
» USB 3.0
LED indicator
User Operation
1. USB HUB connection:
a) Connect power line with outlet, DC connector with DC interface in HUB
b) Connect USB-A type cable with computer USB interface, plug USB-B type female
interface
c) Turn Power Switch ON on the HUB
When power indicator lights up, it shows HUB working normally.
N -2-
SONI&
User Operation Operation
2 . Device connection:
Insert to be connected with USB device, corresponding LED indicator for HUB interface
will be lighted(blue), lower right comer of computer will have a mobile hardware prompt,
disk management will also have one, shows device in a normal work status (Below)
| Safely Remove Hardware and Eject Media LOCAL DISK (E:)
| |
| — a
a (Tg |" FF a da 17:49 E” 75568 free of 7,55 GB
3 . Device Removal:
Note:
When you need to remove Mobile Devices, please stop data R&W first.
a) Right-click the mobile hardware icon at the right lower corner of computer, select
"Eject the USB device", safely remove the hardware
b) Exit the USB hardware, USB interface LED goes out, remove the external mobile
devices
E Open Devices and Printers
: © Safe To Remove Hardware 4 Xx
св Eject DataTraveler 2.0 The "USE Mass Storage Device’ device can now be safely
- Removable Disk (F:) removed from the computer.
|
am ÉEject80211n USE Wireless LAN Card #2 5.. |W Task. '™ Not. ra.
Note:
1. Power adaptor is supplied with the HUB. Please ensure you have connected the
HUB to outlet, power strip or surge protector via the power adaptor.
2. Please connect the HUB to outlet, power strip or surge protector via the original
power adaptor from SONIQ.Non-original power adaptor may damage the HUB
and your devices. SONIQ will not be liable for Warranty Service when any damage
caused by Non-original power adaptor.
3. This item could charging or powering devices. However, it's not a standard charger.
Charging or powering your devices with original charger is recommended.
E -3-