Bootlace Crimper, 0.5

Bootlace Crimper, 0.5 - 16mm2 - Low Cost

Low cost tool with a huge crimp range, for bootlace ferrules, insulated and un-insulated from 0.5 - 16mm2. The jaws are ribbed to create a roughened surface on the ferrule to increase

“locking” on the terminal. The tool is ratchet controlled for crimp consistency, and the ratchet is adjustable to compensate for tool wear.

• Length: 203mm

• Weight: 400g

Bootlace Crimper, 16 - 35mm2

This hand tool crimps the top end of the bootlace range, crimping from 16 - 35mm2. It is ratchet controlled for crimp consistency and the ratchet is adjustable. Jaws are serrated which create ribs on the bootlace pin so that it grips in the terminal block.

• Length: 220mm

• Weight: 430g

Crimper/CuƩer 0.5 - 6mm2

• Length: 250mm

• Weight: 330g

Copper Lug Hand Crimper 1.5 - 10mm2

Low cost ratchet lug crimper. Indent crimper for copper lugs 1.5 - 10mm2. A ratchet opera on ensures correct crimp and reduced hand effort.

15.Length: 260mm

16.Weight: 540g

Copper Lug Hand Crimper 1.5 - 16mm2

Low cost ratchet crimper crimps copper lugs and un-insulated terminals 1.5 -16mm2. A ratchet opera on ensures correct crimp and a ‘W’ crimp for large crimp range.

19.Length: 280mm

20.Weight: 500g

Copper Lugs Crimper, 16 - 120mm2 - Indent

Indent lug crimp tool for indent crimping copper lugs. Adjustable die enables indent crimping from 16 - 120mm2.

23.Length: 650mm

24.Weight: 3.6kgg

Bootlace Crimper, 0.5 - 2.5mm2 - Plier Style

Low cost manual plier type crimper for bootlace ferrules (BLP) and un-insulated end sleeves 0.5 -

2.5mm2. Spring opening ac on.

• Length: 145mm

• Weight: 160g

Brass Terminal Crimper, 0.75 - 6mm2 Roll Crimp

Low cost brass terminal crimper. Mainly quick connector type (QCB or MTB type) 0.75 - 6mm2.

The crimp achieved is a roll crimp, which supports the insula on and crimps the wire. Not suitable for flag terminals.

• Length: 230mm

• Weight: 500g

Copper Lug Hand Crimper 1.5 - 10mm2 - Plier

Style

Low cost, plier type tool for indent crimping 1.5 -

10mm2copper lugs and terminals.

17.Length: 250mm

18.Weight: 440g

CombinaƟon Non-Ratchet Crimper 1.5 -

6mm2

Low cost ratchet crimper crimps copper lugs and un-insulated terminals 1.5 -16mm2. A ratchet opera on ensures correct crimp and a

‘W’ crimp for large crimp range.

280mm

500g

Copper Lug Hand Crimper, 1.5 - 16mm2 -

Heavy Duty

Robust ratchet crimper for copper lugs and un-insulated terminals 1.5 - 16mm2. A ratchet opera on ensures a correct crimp.

• Length: 320mm

• Weight: 720g

Copper Lugs Crimper, 6 - 50mm2 - Hexagonal

Hexagonal copper lug crimper with crimp range 6

- 50mm2. Dies are self-contained and rota ng, so

K05

Y-K05H/21

Spare die set they cannot be misplaced. Tool has an over-centre ac on to ensure complete crimp.

• Length: 390mm

• Weight: 1.3kg

120mm2 - Hexagonal

Hexagonal copper lug crimper with crimp range 6 - 120mm2. Dies are self- contained and rota ng, so they cannot be misplaced. Tool has over-centre ac on to ensure complete crimp.

• Length: 660mm

• Weight: 3.5kg

K06

K06CK06 with removable screw in handles in a carry case

Y-K06H/23

Spare die set

Pre-insulated Terminal Crimper - Light weight

This tool is very useful for general electrical installaon, in that it combines red and blue pre-insulated terminal jaws, with bootlace terminal jaws 0.25mm2-

2.5mm2(BLF025 to BLF250). It is also light weight made from a tanium alloy, with ultra so cushioned handles. Ratchet opera on ensures a correct crimp.

• Length: 210mm

• Weight: 200g

Pre-insulated Terminal Crimper, Red, Blue and

Yellow - Precision

Ratchet terminal crimper for red, blue and yellow pre-insulated terminals. Jaws are hardened and polished to achieve op mum crimp. Ratchet opera on ensures correct crimp and reduced hand effort.

• Length: 235mm

• Weight: 480g

ACSR and Steel Wire Ratchet CuƩer - 25mm O.D.

Compact ratchet cable cu er, designed to

400mm2ACSR maximum, and 150mm2steel wire cable, typical maximum O.D. of 25mm. It will easily cut conductors up to:

48.Bare copper building wire up to 400mm2(61 x 2.85)

49.Flexible copper cables up to 500mm2

50.Aluminium 630mm2 XLPE double insulated

The handles extend and lock into place. To open the cu er, release the blade ratchet by pulling handles completely open. Supplied with a canvas carry bag.

• Length: 560mm (handles not extended)

• Weight: 3kg

K686/T

Spare Blade

Armoured Cable Ratchet Cable CuƩer - 3 x

300mm2

Compact ratchet cable cu er, designed to cut 3 x

300mm2cable and 100mm2copper aluminium armoured cable. The handles extend and lock into place. To open the cu er, release the blade ratchet by pulling the handles completely open.

Supplied with a canvas carry bag.

• Length: 480mm (handles not extended)

• Weight: 6.5kg

Armoured Cable Ratchet Cable CuƩer - 130mm2

Compact ratchet cable cu er, designed to cut 3 x

300mm2cable and 130mm2aluminium armoured cable. The handles extend and lock into place. To open the cu er, release the blade ratchet by pulling the handles completely open. Supplied with a canvas carry bag.

• Length: 480mm (handles not extended)

• Weight: 7.5kg

Pre-insulated Terminal Crimper, Red, Blue and Yellow

Low cost ratchet terminal crimper for red, blue and yellow pre-insulated terminals. Ratchet opera on ensures correct crimp and reduced hand effort. When crimping flexible conductors in yellow terminals the maximum capacity of the tool is 6mm2.

• Length: 230mm

• Weight: 540g

Professional Crimping Tool - Super High

Leverage Ergonomic Handle

• High precision ratchet style crimping tool for

red, blue and yellow pre-insulated terminals

• Super high leverage ergonomic handles

• Jaws are hardened and polished to achieve

op mum crimp

• Ratchet opera on ensures correct crimp and

reduced hand effort

• High quality tool will ensure years of

• Ratchet release clip

• The tool features an adjustment dial to

further enhance the quality of the tool

Cable CuƩer - General Purpose - Up to 70mm2

Low cost cu er for copper and aluminium conductors up to 70mm2. Parrot beak style to ensure cu ng without distor on to cable.

• Length: 230mm

• Weight: 340g

Cable CuƩer - Up to 240mm2

Small cable cu er for annealed copper and aluminium conductors up to 240mm2. ‘Parrot beak’ blades do not distort cable - eases lugging.

Replacement blade catalogue no: KME2 BLADE

• Length: 610mm

• Weight: 1.8kg

Armoured Cable Ratchet Cable CuƩer - 58mm

O.D.

Compact ratchet cable cu er, designed to cut 3 by

120mm2armoured cable maximum. Typical maximum O.D. of cable that the tool will cut is

58mm. It will easily cut normal copper or aluminum cable. The handles extend and lock into place. To open the cu er, release the blade ratchet by pulling handles completely open.

Supplied with a canvas carry bag.

• Length: 505mm (handles not extended)

• Weight: 3kg

K687/T

Spare Blade

Y-K687T/ MBLADE

Die-less Bootlace Ferrule Crimper, 0.25 - 6mm

The HNKE9 bootlace ferrule crimper has a unique crimp ac on, which automa cally crimps a range of terminals from 0.25 - 6mm2. Simply insert the wire and ferrule and squeeze the handles, and the tool self adjusts and crimps.

The crimp surface is “serrated” by the tool, crea ng an enhanced grip. The tool is ratchet controlled for crimp consistency, and has six pressure adjustments. Please ensure this tool is well oiled to ensure correct opera on.

• Length: 170mm

• Weight: 400g

Die-less Bootlace Ferrule Crimper, 0.75 - 6mm2

The HNKE10 tool is the mid range tool in the die-less tool range, covering 0.75 to 6mm2. The principal of the tool is that it has four faces that simultaneously move inward as the tool is closed, crea ng a square crimped pin with serra ons on the pin. This ac on creates a self adjus ng tool, which crimps over a large range. To crimp, simply insert the ferrule and squeeze the handles, and the tool does the rest. The tool is ratchet controlled for crimp consistency, and the ratchet has 9 adjustment posi ons, to compensate for tool wear. Please ensure this tool is well oiled to ensure correct opera on.

• Length: 170mm

• Weight: 360g

Cable CuƩer - Up to 500mm2

Large cable cu er for annealed copper and aluminium conductors up to 500mm2. ‘Parrot beak’ blades do not distort cable - eases lugging.

Replacement blade catalogue no: KME3 BLADE

• Length: 805mm

• Weight: 2.8kg

Cable CuƩer - Parrot Beak up to 120mm2

A handy cu er for mid range copper and aluminium cables. Small enough to fit into a tool box. Has

“parrot beak” which keeps cables round a er cu ng.

• Length: 300mm

• • Weight: 700g

Ratchet Cable CuƩer, Compact - Up to 400mm2

This cu er is a compact single hand operated cu er, that will cut up to 52mm outside diameter, with a nominal maximum capacity of 400mm2. For cu ng annealed copper and aluminium cables only, not hardened overhead style aluminium or ACSR.

It’s small size allows it to fit in the average tool box.

The ratchet reduces hand effort.

• Length: 260mm

• Weight: 820g

Ratchet Cable CuƩers, Compact - Up to

300m2

Ratchet operated cable cu er. Compact cu er for cu ng annealed copper and aluminium conductors up to 300mm2(maximum 32mm outside diameter.) Small size enables cu ng in ght spots. Ratchet reduces hand effort. New wide ratchet for longer life.

• Length: 260mm

• Weight: 680g

K683/T

Replacement Blades

Y-K683T/3

Moving blade

Y-K683T/4

Fixed blade

Hot air gun with 2 temperature and airflow stages

• Output 1600W

• Temperature 300 / 500°C

• Airflow 240 / 450 l/min.

• Voltage 230 – 240V

• Weight 700g

CABAC’s Hole Cu ers are designed for long life and allow fast cu ng of accurately sized holes in metal, steel and plas c.

They can be used with a hand drill or press mounted drill and can cut a precision hole. They come complete with arbor and pilot drill, individually packed in a merchandiser pack.

HC13mm

HC16mm

HC20mm

HC23mm

HC25mm

HC29mm

HC32mm

HC40mm

HC44mm

HC50mm

HC55mm

Hole Saws - Industrial Style

CABAC Metal Cu ng Hole Saws are a high speed bi-metal style hole saw for heavy duty cu ng of thin metal, stainless steel and hard mbers. They come in a full range including kits, and various arbors.

93.High speed steel bi-metal edge welded to an alloy steel back for heavy cu ng

• Variable tooth pa ern for be er cu ng

• Size from 14mm to 102mm

• Cu ng depth 35mm to 47mm

• Cuts through stainless steel and other materials including pipe, nail embedded wood, hard wood, plywood and plas cs

These saws can be used in low speed or speed adjustable electric drills, pneuma c tools, ver cal drilling machines, lathes, boring machines, milling machines etc. The saws are supplied without anarbor, these must be ordered separately.

Hole Saw Kits

CABAC’s Hole Saw Kits are supplied in handy plas c cases and have the most common saws included, for conduit, lights etc.

HSKIT116, 20, 22, 25, 32, 40, 44, 51, 57, 64, 76 with HSAB1 and HSAB2 arbors

HSKIT220, 25, 32, 40, 51, 64 with HSAB1 and HSAB2 arbors

HSKIT320, 22, 25, 32, 40 with HSAB1 arbor and adaptor for saws above 32mm

HSKIT420, 22, 25, 32, 40, 51 with HSAB1 and HSAB2 arbors

Catalogue

No.

Hole

Diam

(mm)

Arbor

Required

Opera ng speeds - RPM

Mild

Steel

Stainless

Steel

Cast

Iron

Brass Aluminium

HS48

HS51

HS54

HS57

HS60

HS64

HS67

HS70

HS73

HS76

HS79

HS83

HS86

HS89

HS92

HS95

HS102

HS14

HS16

HS19

HS20

HS22

HS25

HS29

HS32

HS35

HS38

HS40

HS41

HS44

48

51

54

57

60

64

67

70

73

76

79

83

86

89

92

95

102

38

40

41

44

25

29

32

35

14

16

19

20

22

HSAB1 for saws

14 - 29mm

HSAB2 (quick release style) or HSAB3

(standard style) for saws

32 - 102mm

180

170

160

150

140

135

130

125

120

115

110

105

100

95

95

90

85

230

220

210

195

350

285

275

250

800

550

450

425

390

90

85

80

75

70

65

65

60

60

55

55

50

50

45

45

45

40

115

110

105

95

175

145

140

125

300

275

220

210

195

Note: Saws do not include arbors, these are shown below

Catalogue

No.

Saw Size (mm) Contents

120

115

105

110

95

90

85

80

80

75

70

70

65

65

60

60

55

150

145

140

130

235

190

180

165

400

365

290

280

260

HSAB1

HSAB2

HSAB3

HSABDRILL

14 to 29

32 to 102

32 to 102

Standard screw in style arbor with 7/16 shank

Arbor with quick release locking tangs for larger saws

Standard arbor with locking tangs for larger saws

Spare drill for all arbors

240

230

210

200

190

180

170

160

160

150

140

140

130

130

120

120

110

300

290

280

260

470

380

360

330

790

730

610

560

520

270

255

240

225

220

205

195

185

180

170

165

155

150

145

140

135

130

345

325

315

295

525

425

410

375

900

825

680

635

585

12 and 13 Tonne HEX Dies

CABAC’s range of 12 and 13 tonne dies are standard interna onal dies that will fit most 12 tonne tools. The range shown is our standard range, any specials can be manufactured to order.

Copper Hexagonal Dies

Catalogue

No.

Copper

Conductor

Size (mm 2 )

CP6D

CP10D

CP16D

CP25D

CP35D

CP50D

CP70D

CP95D

CP120D

CP150D

CP185D

CP240D

CP300D

CP400D

95

120

150

185

240

300

400

25

35

50

70

6

10

16

2 Tonne Hydraulic Crimper - ‘C’ Head

CABAC’s 12 tonne ‘C’ head hydraulic crimpers come with 38mm throat opening.

• Quality manufacture and robust design will give years of trouble free service

• Nominal force of 13.3 tonnes at the die faces

• Head rotates 180º for work in ght spaces

• Two speed unit, which advances the dies at a high speed un l a crimping force is encountered, and then automa cally changes to a low speed. This

• Nominal largest die size is 400mm2

• Accepts standard South Africa and interna onal 12 tonne dies

• Safety valve that protects against over pressure

• Supplied in a case which houses up to 15 die sets

Technical Data-C

Length

Tool only weight

In case weight

Throat Opening

CP400

636mm

6.2kg

8.7kg

38mm

Ergonomic Industrial Cuƫng Knife

CABAC’s KUK3 cu ng knife has a unique curved shape, so that hand fa gue is minimised. It is a heavy duty design, with a quick change blade feature, and a four posi on retractable blade. The handle has moulded rubber grips. It comes with four spare blades inside.

175mm

280g

Hacksaw - Professional Tradesman’s Tool

The new Hacksaw from CABAC is a true professional tool designed for a long life in con nuous use. A patented quick blade change and ergonomic handle with rubber grip put this hacksaw ahead of the rest. Spare blades can be stored inside the handle, and blade can be posi oned for 45 and 90° cu ng.

420mm

880g

HVSDK5 - Screwdriver Set - 8 Piece

This eight piece set contains the most common drivers and an electrical test screwdriver.

Slo ed

2.4 x 75mm

4.0 x 100mm

5.5 x 125mm

6.5 x 150mm

Dimensions:

Weight:

Phillips

#0 x 60mm

#1 x 80mm

#2 x 100mmn

330 x 160 x 45

560g

12 Tonne Hydraulic Crimper - Remote “C” Head

• Wide throat ‘C’ head with a 38mm opening

• They should be used with a CABAC remote pump, or any pump developing 700 bar (10,000 pressure

• Suit standard CABAC 12 tonne dies

• Crimp range to 400mm2

Technical Data

Length

Weight

Throat Opening

CP400H

245mm

4.8kg

38mm

5 Tonne Hydraulic Crimper

The CABAC CHX185 tool is a 5 tonne tool that is excep onally light weight, and is designed primarily for the overhead linesman. It can be operated with one hand, and is small enough to be carried in the linesman’s tool pouch.

• Nominal force 5 tonne at die faces

• Hexagonal dies for standard South African dimensions

• Largest die size 185mm2CU lug

• Only 3 pumping opera ons required to complete crimp release

• Compact

• Ideal for overhead or confined applica ons

• Reduced opening width of handles

• Rubber insulated handles

• Safety valve to protect against overpressure

• Head rotates 180º

• The tool can be operated with one hand whilst using the other to ensure correct posi oning of crimp

• Being light weight, authori es recommend this tool to reduce health and safety risk

373mm

• Weight: 2.6kg without dies and case

Dies for 5 Tonne Tool Range

Nominal

Conductor

(mm 2 )

10 - 16

25 - 35

50 - 70

95 - 120

150

185

Copper

Lugs Die

Catalogue No.

CX1016D

CX2535D

CX5070D

CX95120D

CX150D

CX185D

The CHX185 is supplied in a case with 20 die storage pockets.

Individual Screwdrivers

The screwdrivers can be bought individually to top up the hang cell merchandiser. They have a hole in the handle so they can be hung on any merchandiser display.

Slo ed (Flat Head) Range

Catalogue

No.

Head

Width (mm)

Sha

Length (mm)

Overall

Length (mm)

Weight

(g)

HVS5-75S

HVS5-100SA

2.4

3.5

HVS5-100SB

HVS5-125S

4.0

5.5

HVS5-150S 6.5

HVS5-175S 8.0

Phillips Head Range

Catalogue

No.

Head

Width (mm)

75

100

100

125

150

175

Sha

Length (mm)

160

185

205

230

265

300

29

34

61

82

118

184

Overall

Length (mm)

Weight

(g)

HVS5-60P

HVS5-80P

HVS5-100P

HVS5-150P

#0

#1

#2

#3

60

80

100

150

145

185

215

275

30

67

97

174

CABAC’s KT7.5M tape is a metric and imperial tape, with an advanced patented lock mechanism, which allows the tape to be easily handled with one hand.

An ergonomic design to fit the users hand easily. They come in red, blue or green cases, and are packed in counter merchandising units of six at a me. KT10M is a metric only tape, now with new rubber case, hook, magne c grip and tape lock.

• Size: (L)95 x (W)40 x (H)80mm

• Weight: 340g

KUK3

KUK1/B

KT7.5M

7.5m imperial & metric

Electrical Pliers 1000V Rated - 175mm (7”)

175mm (7”) electrical pliers, drop forged vanadium steel with 1000V insulated handles

• Features serrated nose grip, and bevelled side

cu ng blades

Electrical Pliers 1000V Rated - 205mm (8”)

• 205mm (8”) electrical pliers, drop forged vanadium steel with 1000V insulated handles

• Features serrated nose grip, and bevelled side

cu ng blades

Electrical Pliers 1000V Rated - 230mm (9”) - High Leverage

• These pliers are truly professional, for the discerning user

• They are made from a special high grade steel

• They are light weight and have an off-centre swivel that gives a high leverage ac on to 2.5mm) and nails (up to 4.2mm), without any damage

141.Have two crimping dies for lugs and terminals up to 6mm2

360g

• mm (6”) long nose, drop forged vanadium steel with

1000V insulated handles

• 150Features long serrated inside jaws and bevelled

Long Nose Pliers 1000V Rated - 205mm (8”)

• 205mm (8”) long nose, drop forged vanadium steel with 1000V insulated handles

• Features long serrated inside jaws and bevelled cu ng blades

260g

Long Nose Pliers 125mm (5”) for Intricate Work

• For use in fine electrical data and electronic work

• Two colour cushioned handle, with finger protec on

Side CuƩer 125mm (5”) for Intricate Work

• For use in fine electrical data and electronic work

• Two colour cushioned handle, with finger protec on

90g

Side CuƩers 1000V Rated - 150mm (6”)

• 150mm (6”) side cu er, drop forged vanadium steel with 1000V insulated handles

Side CuƩers 1000V Rated - 200mm (8”)

• 200mm (8”) side cu er, drop forged vanadium steel with 1000V insulated handles

• Features cu ng

Cable End Stripper, 0.5 - 6.0mm2

Low cost cable end stripper and cu er. For conductors 0.5

- 6mm2. Has a built in depth gauge and adjustment for so or hard insula on. Good for flat cables.

• Length: 170mm

• Weight: 200g

General Wire Stripper - “Double V”

CABAC’s HVKUS stripper is a conven onal double

‘V’ blade stripper with a cu ng depth adjustment.

165mm

Sheath Stripper - No Limit Dia.

Special purpose cable sheath stripper for the easy removal of sheath on large (no limit) diameter cable. By moving handle up and down, the stripper ‘walks’ along the cable. Suitable for XLPE and other hard insula ons. Spare blades are available.

KMS-EX

KMS

KMS-EX

(Top of the range model, supplied with case)

Spare Blade

KMS BLADE

Cable e tensioning tool speeds up cable e applica on. Ensures correct automa c cut-off.

Eliminates sharp edges on cut es. Maximum e width 4.8mm.

• Length: 165mm

• Weight: 310g