Extreme Networks Data Sheet

Alpine

®

3800 Series

Alpine 3800 series switches enable new converged technologies, such as wireless and Voice-over-IP (VoIP).

Availability

• Hot-swappable I/O modules and fan trays

• Fully redundant, load-sharing, hot-swappable power supplies

• Ethernet Automatic Protection Switching (EAPS) for

SONET-like resiliency

Security

• Protection against Denial of Service (DoS) attacks

• Network Login and 802.1x to authenticate and protect networks at the point of entry

• Hardware based Layers 2 – 4 Access Control Lists (ACLs) at wire-speed

Scalability

• Policy-Based Quality of Service (QoS) at wire-speed to allocate bandwidth and prioritize traffic

• Bidirectional rate shaping to provision and manage bandwidth by the slice from 1Kbps to 1Gbps

• Jumbo frames to efficiently utilize high-performance connections

Management

• Secure Shell (SSH2) encrypts remote telnet management connections across the network

• End-to-end ExtremeWare ® and EPICenter ® software

Extreme Networks ® award-winning Alpine 3800 chassis switches support the scalability, flexibility, security and management features required to build complete enterprise networks, including large campuses, branch offices, data centers and wiring closets. Alpine 3800 series switches enable enterprise networks to adopt new technologies, such as wireless and VoIP, by offering intelligent security and availability features to keep network convergence simple and manageable.

Providing advanced availability, scalability and management features, Alpine 3800 series switches are ideally suited for service providers and metropolitan area networks.

Alpine 3800 series switches support a wide offering of high-performance Ethernet connections including standard Category 5 and fiber optic media. With the flexibility and scalability of a modular chassis, Alpine switches provide a complete solution for Ethernet network connectivity.

Target Applications

• Highly available, simple converged networks supporting VoIP applications.

• Server farms with high density 10/100 and gigabit traffic control requirements.

• Gigabit metro Ethernet networks with requirements for VPN and to interconnect enterprise sites.

Extreme Networks Data Sheet

Technology that Preserves Your Investment

Alpine 3800 Chassis

Switch Features

High Availability

Alpine 3800 series chassis support hot swappable I/O modules and fan trays along with fully redundant, hot swappable power supplies that ensure high availability. Alpine 3800 switches are

NEBS Level 3 compliant and meets the highest level of quality demanded by network service providers around the world.

Ethernet Automatic Protection

Switching (EAPS) allows the IP network to provide the level of resiliency and uptime that users expect from their traditional voice networks. EAPS is superior to Spanning Tree or Rapid

Spanning Tree Protocols, offering subsecond (less than 50 milliseconds) recovery and delivers consistent failover regardless of number of VLANs, number of network nodes or network topology.

In most situations, digital video feeds don’t freeze or pixelize because EAPS allows the network to recover almost transparently from link failure. Alpine 3800 series supports Spanning Tree, VLAN

Spanning Tree (802.1D), and Rapid

Spanning Tree (802.1w) protocols for

Layer 2 resiliency. Software enhanced availability allows users to remain connected to the network even if part of the network infrastructure is down.

Alpine 3800 series switches constantly check for problems in the uplink connections using advanced Layer 3 protocols such as OSPF, VRRP and

ESRP (ESRP supported in Layer 2 or

Layer 3), and dynamically routes around the problem. Equal Cost Multipath

(ECMP) allows uplinks to be load balanced for performance and cost savings while also supporting redundant failover. If an uplink fails, traffic is automatically routed to the remaining uplinks and connectivity is maintained.

Link aggregation allows trunking of up to eight links on a single logical connection, to provide a single trunk of redundant bandwidth per logical connection.

Extensive Traffic Management

Capabilities

Extreme Networks revolutionary rate shaping capabilities provide Layer 3 IP/

Ethernet networks that deliver a fixed latency, guaranteed transit path for voice or video traffic equal to that achievable with ATM but at a fraction of the cost and complexity. This makes the implementation of VoIP or VOD or other delay sensitive traffic feasible, without requiring bandwidth over-provisioning.

IETF DiffServ combined with Policy-Based

QoS allows classes of services to be defined and enforced end-to-end across the network. Extreme Networks capability to classify packets using Layer 1 through

Layer 4 attributes regardless of whether traffic is being switched or routed, combined with the ability to also honor priorities assigned before the traffic entered their network as well as re-write the signaling attributes (i.e. DiffServ), gives service providers unique control of application and service quality. These advanced capabilities provide high bandwidth management and congestion control.

Providing powerful network visibility, sFlow is a sampling technology that provides the ability to continuously monitor application level traffic flows on all interfaces simultaneously. The sFlow agent is a software process that runs on

Alpine 3800 series switches, and packages data into sFlow datagrams that are sent over the network to an sFlow Collector that has an up-to-the-minute view of traffic across the network. sFlow can be used to troubleshoot network problems, control congestion and to detect network security threats.

Comprehensive Security

Features

VMANs allow service providers to securely preserve the integrity of their customers’ data while mixing and matching traffic from multiple sources over the same shared backbone. Providing intrusion detection and prevention,

Alpine 3800 series switches support linerate port mirroring. This can be used to mirror traffic to an external network appliance such as an intrusion detection device for trend analysis or be utilized by a network administrator as a diagnostic tool when fending off a network attack.

ACLs are one of the most powerful tools to control network resource utilization and to secure and protect the network. Alpine 3800 series supports ACLs based on Layer 2, 3 or 4-header information such as the MAC address or IP source/destination address.

The use of protocols like SSH2, SCP and

SNMPv3 supported by an Alpine 3800 series switch prevents the interception of management communications and man-inthe middle attacks. When a hub or Wireless

Access Point (WAP) is attached to a switch running 802.1x, only the first user on the hub or WAP is authenticated; any subsequent users connected to the hub or WAP are allowed to pass unchallenged. Multiple supplicant (client) support on Alpine 3800 allows multiple clients to be individually authenticated on the same port.

The IPDA SUBNET lookup feature reduces exposure to malicious users or virus infected end clients and accelerates packet forwarding.

Alpine 3800 series switches handle DoS attacks gracefully. If the switch detects an unusually large number of packets in the

CPU input queue, it will assemble ACLs that automatically stop these packets from reaching the CPU. After a period of time, the ACLs are removed. If the attack continues, they are reinstalled.

Ease of Management

Extreme Networks has developed tools that save you time and resources in managing your network. EPICenter ® provides all fault configuration, accounting, performance, and security functions to manage Extreme Networks’ multilayer switching equipment in a converged network. EPICenter Policy Manager provides layer independent policy enforcement for Layers 1 – 4.

Extreme Networks’ software application,

ServiceWatch ® , delivers powerful,

Layers 4 – 7 monitoring and management for mission-critical network services.

© 2006 Extreme Networks, Inc. All rights reserved. Alpine 3800 Series—Page 2

Extreme Networks Data Sheet

Technical Specifications

ExtremeWare 7.7 Supported

Protocols

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

General Routing and Switching:

• RFC 1812 Requirements for IP Version 4

•

Routers

RFC 1519 CIDR

RFC 1256 IPv4 ICMP Router Discovery (IRDP)

RFC 1122 Host Requirements

RFC 768 UDP

RFC 791 IP

FC 792 ICMP

RFC 793 TCP

RFC 826 ARP

RFC 894 IP over Ethernet

RFC 1027 Proxy ARP

RFC 2338 VRRP

RFC 3619 Ethernet Automatic Protection

Switching (EAPS) and EAPSv2

•

•

•

•

IEEE 802.1D – 1998 Spanning Tree Protocol

(STP)

IEEE 802.1w – 2001 Rapid Reconfiguration for

STP, RSTP

IEEE 802.1s – 2004 Multiple Instances of STP,

MSTP

Extreme Multiple Instances of Spanning Tree

Protocol (EMISTP)

PVST+, Per VLAN STP (802.1Q interoperable)

Extreme Standby Router Protocol (ESRP)

IEEE 802.1Q – 2003 Virtual Bridged Local Area

Networks

Extreme Discovery Protocol (EDP)

Static Unicast Routes

Extreme Loop Recovery Protocol (ELRP)

Software Redundant Ports

IPX RIP/SAP Router specification

VLANs

• IEEE 802.1Q VLAN Tagging

•

•

IEEE 802.3ad Static configuration and dynamic

(LACP) for server attached

IEEE 802.1v: VLAN classification by Protocol and Port

•

•

•

•

•

•

•

•

•

•

•

•

Port-based VLANs

MAC-based VLANs

Protocol-based VLANs

Multiple STP domains per VLAN

•

•

•

RFC-3069 VLAN Aggregation for Efficient IP

Address Allocation

Virtual MANs (vMANs)

VLAN Translation

Quality of Service and Policies

• IEEE 802.1D – 1998 (802.1p) Packet Priority

• RFC 2474 DiffServ Precedence, including 8 queues/port

RFC 2598 DiffServ Expedited Forwarding (EF)

RFC 2597 DiffServ Assured Forwarding (AF)

RFC 2475 DiffServ Core and Edge Router

Functions

RED as described in “Random Early Detection

Gateways for Congestion Avoidance, Sally Floyd and Van Jacobson”

RED as recommended in RFC 2309

•

•

Bidirectional Rate Shaping

Ingress Rate Limiting

Layer 1-4, Layer 7 (user name) Policy-Based

Mapping

Policy-Based Mapping/Overwriting of DiffServ code points, .1p priority

Network Login/802.1x and DLCS (Dynamic Link

Context System, WINS snooping) based integration with EPICenter Policy Manager for dynamic user/device based policies

© 2006 Extreme Networks, Inc. All rights reserved.

RIP

• RFC 1058 RIP v1

• RFC 2453 RIP v2

•

•

OSPF

• RFC 2328 OSPF v2 (including MD5 authentication)

RFC 1587 OSPF NSSA Option

RFC 1765 OSPF Database Overflow

• RFC 2370 OSPF Opaque LSA Option

(Note: OSPF Edge License includes 2 active interfaces, router priority 0)

IS-IS

• RFC 1142 (ISO 10589), IS-IS protocol

•

•

RFC 1195, Use of OSI IS-IS for routing in TCP/

IP and dual environments

RFC 2104, HMAC: Keyed-Hashing for Message

Authentication, IS-IS HMAC-MD5 Authentication

• RFC 2763 (Dynamic Host Name Exchange for

IS-IS)

•

•

•

•

BGP4

• RFC 1771 Border Gateway Protocol 4

• RFC 1965 Autonomous System Confederations for BGP

• RFC 2796 BGP Route Reflection (supersedes

RFC 1966)

RFC 1997 BGP Communities Attribute

RFC 1745 BGP4/IDRP for IP-OSPF Interaction

RFC 2385 TCP MD5 Authentication for BGPv4

RFC 2439 BGP Route Flap Damping

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

IP Multicast

• RFC 2362 PIM-SM

PIM-DM Draft IETF PIM Dense Mode v2-dm-03

PIM Snooping

DVMRP v3 draft IETF DVMRP v3-07

RFC 1112 IGMP v1

•

•

•

RFC 2236 IGMP v2

IGMP Snooping with Configurable Router

Registration Forwarding

IGMP Filters

•

•

•

•

Static IGMP Membership

Static Multicast Routes

Mtrace, draft-ietf-idmr-traceroute-ipm-07

Mrinfo

Management and Traffic Analysis

• RFC 2030 SNTP, Simple Network Time Protocol

• v4

RFC 1866 HTML – web-based device manage-

•

• ment and Network Login

RFC 2068 HTTP server

RFC 854 Telnet client and server

RFC 783 TFTP Protocol (revision 2)

RFC 951, 1542 BootP

RFC 2131 BOOTP/DHCP relay agent and DHCP server

RFC 1591 DNS (client operation)

RFC 1155 Structure of Mgmt Information

(SMIv1)

RFC 1157 SNMPv1

RFC 1212, RFC 1213, RFC 1215 MIB-II,

Ethernet-Like MIB & TRAPs

RFC 1573 Evolution of Interface

RFC 1901 – 1908 SNMP Version 2c, SMIv2 and Revised MIB-II

RFC 2570 – 2575 SNMPv3, user based security, encryption and authentication

RFC 2576 Coexistence between SNMP Version

1, Version 2 and Version 3

RFC 2665 Ethernet-Like-MIB

RFC 1757 RMON 4 groups: Stats, History,

Alarms and Events

RFC 2021 RMON2 (probe configuration)

RFC 2613 SMON MIB

RFC 2668 802.3 MAU MIB

RFC 1643 Ethernet MIB

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

RFC 1493 Bridge MIB

RFC 2737 Entity MIB, Version 2

RFC 2674 802.1p/802.1Q MIBs

RFC 1354 IPv4 Forwarding Table MIB

RFC 2233 Interface MIB

RFC 2096 IP Forwarding Table MIB

RFC 1724 RIPv2 MIB

RFC 1850 OSPFv2 MIB

RFC 1657 BGPv4 MIB

RFC 2787 VRRP MIB

RFC 2925 Ping/Traceroute/NSLOOKUP MIB

RFC 2932 – IPv4 Multicast Routing MIB

RFC 2933 – Internet Group Management Protocol

MIB

RFC 2934 – Protocol Independent Multicast MIB for IPv4

Draft-ietf-bridge-rstpmib-03.txt – Definitions of

Managed Objects for Bridges with Rapid

Spanning Tree Protocol draft-ietf-bridge-8021x-01.txt (IEEE8021-PAE-MIB)

IEEE 802.1x – 2001 MIB

Extreme extensions to 802.1x-MIB

Secure Shell (SSHv2) clients and servers

Secure Copy (SCPv2) client and server

Secure FTP (SFTP) server sFlow version 5

NetFlow version 1 export

Configuration logging

Multiple Images, Multiple Configs

BSD System Logging Protocol (SYSLOG), with

Multiple Syslog Servers

Local Messages (criticals stored across reboots)

IEEE 802.1ab Link Layer Discovery Protocol

(LLDP)

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

ExtremeWare vendor MIBs: Includes ACL, MAC FDB,

IP FDB, MAC Address Security, Software Redundant

Port, NetFlow, DoS-Protect MIB, QoS policy, Cable

Diagnostics, VLAN config, vMAN, VLAN Translation and VLAN Aggregation MIBs

Security

• Routing protocol MD5 authentication (see above)

•

•

Secure Shell (SSHv2),Secure Copy (SCPv2) and

SFTP with encryption/authentication

SNMPv3 user based security, with encryption/ authentication (see above)

RFC 1492 TACACS+

RFC 2865 RADIUS Authentication

RFC 2866 RADIUS Accounting

RFC 3579 RADIUS Support for Extensible

•

•

•

•

Authentication Protocol (EAP)

RFC 3580 802.1X RADIUS

RADIUS Per-command Authentication

MAC based Network Login using RADIUS

Access Profiles on All Routing Protocols

Access Profiles on All Management Methods

Network Login (web-based DHCP/HTTP/RADIUS mechanism)

RFC 2246 TLS 1.0 + SSL v2/v3 encryption for web-based Network Login

IEEE 802.1x – 2001 Port-Based Network Access

Control for Network Login

Multiple supplicants for Network Login (webbased and 802.1x modes)

Guest VLAN for 802.1x

MAC Address Security – Lockdown, limit and aging

IP Address Security with DHCP Option 82, DHCP

Enforce/Duplicate IP Protection via ARP Learning

Disable

Network Address Translation (NAT)

Layer 2/3/4/7 ACLs

Source IP Lockdown – Dynamic filtering against invalidly sourced traffic

Alpine 3800 Series—Page 3

Extreme Networks Data Sheet

Technical Specifications

•

•

•

•

•

•

•

Denial of Service Protection

• RFC 2267 Network Ingress Filtering

• RPF (Unicast Reverse Path Forwarding)

Control via ACLs

• Wire-speed ACLs

Rate Limiting ACLs

Rate Shaping by ACLs

IP Broadcast Forwarding Control

ICMP and IP-Option Response Control

Server Load Balancing with Layer 3, 4

Protection of Servers

SYN attack protection

FDB table resource protection via IPDA Subnet

•

Lookup

CPU DOS protection with ACL integration:

Identifies packet floods to CPU and sets an

ACL automatically, configurable traffic rate limiting to management CPU/enhanced DoS

Protect

• Unidirectional Session Control

Robust against common Network Attacks:

• CERT (http://www.cert.org)

– CA-2003-04: “SQL Slammer”

–

–

–

CA-2002-36: “SSHredder”

CA-2002-03: SNMP vulnerabilities

–

–

CA-98-13: tcp-denial-of-service

CA-98.01: smurf

CA-97.28: Teardrop_Land -Teardrop and

“LAND” attack

–

–

–

–

CA-96.26: ping

CA-96.21: tcp_syn_flooding

CA-96.01: UDP_service_denial

CA-95.01: IP_Spoofing_Attacks_and_

–

Hijacked_ Terminal_Connections

IP Options Attack

Host Attacks

• Teardrop, boink, opentear, jolt2, newtear, nestea, syndrop, smurf, fraggle, papasmurf, synk4, raped, winfreeze, ping –f, ping of death, pepsi5, Latierra, Winnuke, Simping,

Sping, Ascend, Stream, Land, Octopus

Product Specifications

Alpine 3804 Chassis

– 5-slot chassis

Port Densities

– 64 10/100/1000BASE-T ports

–

–

64 1000BASE-X ports

128 10/100BASE-TX ports

– 96 100BASE-FX MMF ports

Performance

–

–

32 Gbps switch fabric bandwidth

24 Mpps forwarding rate

–

–

–

–

–

–

128K MAC addresses

4096 VLANs

Physical Dimensions

– Rack height: 6RU

10.5 in (H) x 17.3 in (W) x 15.5 in (D)

26.7 cm (H) x 43.9 cm (W) x 39.4 cm (D)

Weight (empty): 30 lbs (14 kg)

Weight (fully loaded): 68 lbs (31 kg)

–

–

Power and Heat Dissipation

– Power Supply Input: 577 Watts

Heat Dissipation 2000 BTU/hour

Current Rating: 6.5A @ 100 VAC; 3.5A @ 200

–

–

VAC; 15A @ -40VDC

Acoustic Sound

Sound Power = 72 dBA per ISO 7779

Declared Sound Power = 7.4 belsA per ISO

7779 / ISO 9296

– Bystander Sound Pressure = 66 dBA front @

.6m per NEBS GR-63 Issue 2

© 2006 Extreme Networks, Inc. All rights reserved.

Alpine 3808 Chassis

–

–

9-slot chassis

Port Densities

– 128 10/100/1000BASE-T ports

128 1000BASE-X ports

–

–

256 10/100BASE-TX ports

192 100BASE-FX MMF ports

Performance

– 64 Gbps switch fabric bandwidth

–

–

–

–

–

–

48 Mpps forwarding rate

128K MAC addresses

– 4096 VLANs

Physical Dimensions

Rack height: 12RU

21.0 in (H) x 17.3 in (W) x 11.4 in (D)

53.3 cm (H) x 43.9 cm (W) x 28.9 cm (D)

Weight (empty): 50 lbs (23 kg)

–

–

Weight (fully loaded): 100 lbs (45 kg)

Power and Heat Dissipation

– Power Supply Input: 1046 Watts

Heat Dissipation 3600 BTU/hour

– Current Rating: 13A @ 100 VAC;

6.5A @ 200 VAC; 30A @ -40VDC

Acoustic Sound

– Sound Power = 73 dBA per ISO 7779

–

–

Declared Sound Power = 7.3 belsA per ISO

7779 / ISO 9296

Bystander Sound Pressure = 68 dBA right side

@ .6m per NEBS GR-63 Issue 2

General Specifications

Management and I/O Modules

• SMMi: Switch Management Module for Alpine

3804 and Alpine 3808 chassis

•

•

GM-16T3: 16-port auto-negotiating

10/100/1000BASE-TX Module

GM-16X3: 16-port 1000BASE-X mini-GBIC module (requires mini-GBIC modules)

•

•

•

GM-4Xi: 4-port 1000BASE-X GBIC-based module (requires GBIC modules)

FM-24MFi: 24-port 100BASE-FX multi-mode fiber at 1310 nm optics wavelength, 11dBm optical power budget, 2km typical range

FM-32Ti: 32-port of 10/100BASE-TX

Physical Specifications

Dimensions

• SMM Module: 1.0 x 16.25 x 8.0 in (2.5 x 41.3

• x 20.3 cm)

I/O Modules: 1.5 x 16.25 x 8.0 in (3.8 x 41.3 x

•

20.3 cm)

PSU: 2.75 x 16.25 x 8.0 in (7.0 x 41.3 x 20.3 cm)

Weight

• SMM Module: 4lb (1.8kg)

•

•

I/O Modules: 4lb (1.8 kg)

PSU: 9lb (4.1 kg)

Power

• Alpine 3808 Power and Current Rating

–

–

–

–

Power Input: 1046 W

AC PSU [100 to 120 VAC]: 10 A

AC PSU [200 to 240 VAC]: 5 A

DC PSU [-70 to –40 VDC]: 30 A

•

–

–

–

–

–

–

Inrush Current: 5 A2S

Input Wire Specification: 4 AWG

Alpine 3804 Power and Current Rating

– Power Input: 577 W

–

AC PSU [100 to 120 VAC]: 5.6 A

AC PSU [200 to 240 VAC]: 2.3 A

DC PSU [-70 to –40 VDC]: 16.5 A

Inrush Current: 5 A2S

Input Wire Specification: 4 AWG

Power Supply Options

Both AC and DC PSU are available. With Dual-PSU in each Alpine 3804 or Alpine 3808 chassis allows redundancy and load-sharing. The PSU are hot-swappable and field-replaceable PSUs.

•

•

AC Power Supply: 100 to 120 VAC or 200 to

240 VAC (auto-detect)

DC Power Supply: -70 to –40 VDC

Operating Specifications

•

•

•

•

•

•

Operating Temperature: -40° C to 40° C (-40° F to 104° F)

Storage Temperature: -40° C to 70° C (-40° F to

158° F)

Humidity: 10% to 95% non-condensing

AC Power: 100-240 VAC, 50-60 Hz,

1.5-3.0 A max.

DC Power: -36 to -75 VDC, 5% max p-p ripple,

4.2 Amps maximum at -48 VDC

Heat Dissipation: 631 BTU/hr (185 watts)

Regulatory/Safety

•

•

•

•

•

•

•

•

•

•

•

•

GR-63 NEBS Level III Compliant (later additions

GM-16X3 and GM-16T3 have only partial NEBS testing)

UL 60950-1:2003 1st Ed, Listed Device

ULc listed to CSA22.2 N0.60950-1-03

CB Scheme IEC 60950-1:2001 with all available country deviations

GS Mark, EN 60950-1:2001

EN 60825-1+A2:2001

FCC 21 CFR 1040.10

CDRH Letter of Approval

AS/NZS 3260 (Australia, New Zealand)

NOM/NYCE (Mexico)

Argentina

ANATEL (Brazil)

EMI/EMC Standards

•

•

•

•

•

•

•

•

•

•

•

•

•

GR-63 NEBS Level III Compliant (later additions

GM-16X3 and GM-16T3 have only partial NEBS testing)

FCC CFR 47 Part 15 Class A

EN55022:1998 Class A

EN55024:1998 Class A, includes IEC 61000-4-

2,3,4,5,6,11

CISPR22:1997 Class A

EN61000-3-2 and 3-3

EN300-386 v1.3.1 (2001-09)

ICES-003 Class A

AS/NZS 3548 Class A

VCCI Class A

CNS 13438:1997 Class A

MIC Mark (Korea)

ANATEL (Brazil)

Environmental

•

•

•

•

•

EN/ETSI 300 019-2-1 v2.1.2 – Class 1.2

Storage

EN/ETSI 300 019-2-2 v2.1.2 – Class 2.3

Transportation

EN/ETSI 300 019-2-3 v2.1.2 – Class 3.1e

Operational

EN/ETSI 300 753 (1997-10) – Acoustic Noise

ASTM D3580 Random Vibration Packaged 1.5G

Warranty

•

•

12-months Limited on Hardware

90-days on Software

Alpine 3800 Series—Page 4

Extreme Networks Data Sheet

Ordering Information

Part

Number Description

Chassis

45040

45080

45014

I/O Modules

45122

45121

Alpine 3804 5-slot Chassis (includes fan tray)

Alpine 3808 9-slot Chassis (includes fan tray)

Alpine 3800 Switch Management Module

45112

45210

45211

Software

Alpine 3800 16-port auto-negotiating 10/100/1000BASE-TX (RJ-45) Module

Alpine 3800 16-port 1000BASE-X module with 16 unpopulated mini-GBIC 1000BASE-X ports (SFP)

Alpine 3800 4-port 1000BASE-X GBIC-based (unpopulated) Module

Alpine 3800 32-port 10/100BASE-TX (RJ-45) Module

Alpine 3800 24-port 100BASE-FX (MT-RJ) Multimode Module

45033 ExtremeWare full Layer 3 voucher for the Alpine 3804 and 3808

Power Supplies and Accessories

45012

45022

Alpine 3800 AC Power Supply; Includes power cord for US & Japan

Alpine 3800 DC Power Supply

45005

45013

45015

Alpine 3800 Blank Faceplate (spare)

Alpine 3808 Spare Fan Tray

Alpine 3804 Spare Fan Tray

10011

10013

10017

10051

10052

10053

Extreme 1000BASE-SX GBIC-based transceiver, SC connector, for use with multi-mode fiber with distances up to 550 meters

Extreme 1000BASE-LX GBIC-based transceiver for distances up to 10km; SC connector, for use with single mode fiber

Extreme 1000BASE-ZX GBIC based transceiver, extra long distance single mode fiber: 70Km/21dB Budget. SC connector

Mini-GBIC, SFP, 1000BASE-SX, LC Connector (multimode fiber)

Mini-GBIC, SFP, 1000BASE-LX, LC Connector (single/multimode fiber)

Mini-GBIC, SFP, 1000BASE-ZX, LC Connector (single mode fiber) www.extremenetworks.com

email: [email protected]

Corporate and North America

Extreme Networks, Inc.

3585 Monroe Street

Santa Clara, CA 95051 USA

Phone +1 408 579 2800

Europe, Middle East, Africa and South America

Phone +31 30 800 5100

Asia Pacific

Phone +852 2517 1123

Japan

Phone +81 3 5842 4011

© 2006 Extreme Networks, Inc. All rights reserved.

Extreme Networks, the Extreme Networks Logo, Alpine, EPICenter, ExtremeWare, ServiceWatch and Summit are either registered trademarks or trademarks of Extreme Networks, Inc. in the United States and/or other countries.

Specifications are subject to change without notice.

1032_05 11/06 Alpine 3800 Series Data Sheet