Jabra 14201-16 Datasheet

Headset Hookswitch Control for Cisco Unified IP Phones

The Jabra 14201-16 HHC Adapter enables remote Headset Hookswitch

Control (HHC*) with Jabra wireless headsets and the latest generation of

Cisco Unified IP Phones.

This means that users can hear ring tones, answer and end calls, adjust the volume or even mute the call up to 300 ft. away from their desks. The integration of handset and headset allows users to benefit from enhanced mobility and the ability to multitask while on a call. The wireless freedom improves work efficiency and ergonomics throughout the day.

How it works

The HHC Adapter is a plug-and-play solution that converts from the

HHC standard used in Cisco phones to the DHSG standard used in Jabra headsets – and vice versa.

Handset-Headset compatibility

The HHC Adapter is compatible with the new suite of Cisco Unified

IP Phones released September 2007: 7942G, 7945G, 7962G, 7965G and 7975G. Cisco Unified IP Phone release 8.3(3) will enable the HHC functionality. For more details see www.jabra.com/cisco.

The HHC Adapter can be used with the following Jabra wireless office headsets:

Jabra GN9350

Wireless dual-function** headset that enables users to switch between PC-based VoIP and a desk phone. It offers conference call capability, up to 300 ft range, three wearing styles, up to 9 hours talk time plus optional battery for ‘around-the-clock’ talk time.

Jabra GN9120 EHS

Award-winning wireless headset offering up to 300 ft range, three wearing styles, conference call capability and up to 8 hours talk time.

Jabra GN9120 DUO EHS

Dual speaker version of GN9120 EHS optimized for noisy open office environments.

* HHC = ”Headset Hookswitch Control”, Cisco interface specification

** When the USB link is active calls must be answered using the headset’s button or its base rather than the Cisco Unified IP Phone

Jabra is a registered trademark of GN A/S www.jabra.com

Technical specifications

Jabra HHC Adapter

Item number

Length of cable

Certification

Warranty

Compatibility

Cisco Unified IP Phones*

Jabra Headsets

HHC features

Answer call

End call

Ring tone in headset

Volume control

Mute control

Enables Headset Hookswitch Control with Cisco Unified IP Phones* and Jabra headsets

14201-16

925 mm (36.4 inches)

CE, FCC, IC, NOM, C-Tick, China, Taiwan, Korea, Japan, Australia

North America /APAC: One-year limited warranty. Europe: Two-year limited warranty

7942G, 7945G, 7962G, 7965G, 7975G

GN9120 EHS, GN9120 DUO EHS, GN9350**

Yes

Yes

Yes

Yes

Yes

* HHC requires Cisco Unified Communications Manager 4.1(3) or above plus the 8.3(3) phone firmware load. Available from October 2007.

** When the USB link is active calls must be answered using the headset’s button or its base rather than the Cisco Unified IP Phone .

The Jabra 14201-16 HHC Adapter has tested compatible with the listed Cisco products. The Cisco Compatible logo signifies that GN product has undergone interoperability testing by GN together with Cisco and a third-party test house based on testing criteria set by Cisco. GN is solely responsible for the support and warrenty of this product. Cisco makes no warrenty, express or implied, with respect to GN product or its interoperation with the listed Cisco products and disclaims any implied warrenties of merchantability, fitness for a particular use or against infringement.

For more information on Jabra solutions for Cisco phones go to www.jabra.com/cisco.

Jabra is a registered trademark of GN A/S www.jabra.com

© 2007 GN A/S. All rights reserved. Jabra® is a registered trademark of GN A/S. All other trademarks included herein are the property of their respective owners.

(Design and specifications subject to change without notice)