Samsung SPF-75H Digital Photo Frame Datasheet
Add to my manuals
24 Pages
Samsung LP08MNLSWT is a stylish digital photo frame with a rotating stand that allows vertical or horizontal placement. Enjoy your pictures by using a memory card or USB, and experience the mini-monitor function. The Samsung LP08MNLSWT features a premium and stylish appearance design that can be used as a decoration on a desk or table.
advertisement
| Safety Symbols | Power | Installation |
Using and
Cleaning
Safety Symbols
Make sure to follow the directions below to prevent accidents and damage to the product.
Failure to follow the accompanying directions may lead to serious injury or death.
Failure to follow the accompanying directions may lead to minor personal injury or property damage.
|
| Safety Symbols | Power | Installation |
Power
The images here are for reference only, and are not applicable in all cases (or countries).
Insert the power plug correctly until it is firmly in place.
z
Failing to do so, may cause fire.
Using and
Cleaning
|
Do not use a damaged power plug, cord or outlet, as this may cause electric shock or fire.
Do not touch the power plug with wet hands, as this may cause electric shock.
Do not connect more than one appliance to a single outlet, as an overheated outlet may cause fire.
Do not use force to pull the power cord. Don't place anything heavy on the power cord, as this may cause electric shock or fire. z
Failing to do so, may cause electric shock or fire.
Make sure to turn the power off and disconnect the power plug from the outlet before moving the product. Make sure to disconnect the connection cables from other devices as well. z
Moving the product without disconnecting the power cord may damage it while moving, and may cause electric shock or fire.
Hold and pull out the plug by its body when disconnecting it from the outlet, as pulling the plug out by the cord may cause it to be damaged. z
Failing to do so, may cause fire, or the product may not turn on normally.
Ensure that the power plug is disconnected before cleaning the product. z
Failing to do so, may cause electric shock or fire.
Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehicle. z z
This may cause a malfunction, electric shock or fire.
In particular, avoid operating the monitor near water or outdoors where it could be exposed to snow or rain.
Do not install the product near any heating appliance. z
There is a risk of fire.
Installation
| Safety Symbols | Power | Installation |
Using and
Cleaning
|
When installing the product on a cabinet or shelf, do not let the front end of the product project beyond its front edge. z
Failing to do so, may cause the product to fall, resulting in a product malfunction or personal injury.
Do not place the power cord near a heater, as the power cord may melt, causing electric shock or fire.
Do not install the product in a car or a location exposed to oil, smoke, moisture, water, or rainwater.
z
Any contact of these materials with the product may cause electric shock or fire.
Disconnect the power plug when there is thunder or lightning.
z
Failing to do so, may cause electric shock or fire.
Place the product down gently when installing it.
z
Failing to do so may cause product damage or personal injury.
Avoid dropping the product when moving, as this may cause product damage or personal injury.
Do not install the product in a location easily reached by children.
z
As the product may fall and cause personal injury.
Using and Cleaning
| Safety Symbols | Power | Installation |
Using and
Cleaning
|
Do not insert any metal objects such as forks, wire, or gimlets, or flammable items
such as paper or matches into the ports at the back of the product, as this may cause electric shock or fire.
z
If water or any foreign substance enters the product, make sure to turn the product off and disconnect the power plug from the outlet, and contact a service center .
Never disassemble, repair, or modify the product yourself.
z
If you need to repair your product, contact a service center . An attempt at repairing this product may cause electric shock or fire.
If you hear a strange sound, smell anything burning, or see smoke, disconnect the power plug immediately and contact a service center .
z
Failing to disconnect the power plug may cause electric shock or fire.
Always remove dust and water from the pins and connections of the power plug.
z
Failing to do so may cause electric shock or fire.
When cleaning the product, first disconnect the power plug and clean it with a soft, dry cloth.
z
Do not use any chemicals such as benzene, alcohol, thinners, mosquito repellant, aromatic, lubricant, detergent or wax.
When not using the product for a long time, make sure to disconnect the power plug. z
Heavy accumulated dust may cause electric shock or fire.
If the product needs to be installed in a location that doesn't satisfy general conditions, make sure to contact one of our service engineers about the installation as the product may encounter serious quality problems due to its environment. z
This refers to locations exposed to conditions such as heavy fine dust, chemicals, high or low temperature, moisture, or when the product needs to be used continually without a break over a long time.
If the product has been dropped or the product casing is damaged, turn it off and disconnect the power plug.
z
Using the product without verifying that it has not been damaged may cause electric shock or fire. Please contact a service center .
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with separate
collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household waste at the end of its working life. To prevent possible harm to the environment or damage to health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
| Features | Components | Front | Back
Features
Enjoy picture's by using memory card and USB.
Provides the Mini-Monitor function.
Stylish design
Premium stylish appearance design product that can be used a decoration on a desk or table
Rotating stand allowing vertical/horizontal placement
| Side |
| Features | Components | Front | Back | Side |
Please check that all components are contained in the delivered package.
If anything is omitted, contact the local distributor where the product was purchased. For optional items, contact a service center .
Never use a power adapter other than the adapter provided with the product.
Components
Digital Photo Frame
(The product color and shape may vary depending on the model.)
Manual
Cables
Quick Start
Warranty
(Not available in all locations)
User Manual
Power cord USB cable (A-B type) Power Adapter
| Features | Components |
Front
The product color and shape may vary depending on the model.
Front | Back | Side |
This product is a touch type product. If you lightly touch the button on the right of the product, the button light is turned on.
When the button light is turned on, you can then operate each button's menu.
[MENU] Menu Button Displays the menu window at the bottom left corner of the screen.
[ ] Up Button Used for moving up.
Used for moving left.
[ ] Left Button
[ ] Right Button
[ ] Down Button
Used for moving right.
Used for moving down.
[ ] Enter Button
[
[
] Back Button
] SlideShow Button
Used for selection
Returns to the previous menu.
Starts a slideshow.
| Features | Components |
Back
The product color and shape may vary depending on the model.
Front | Back | Side |
Power terminal
[ ] Power Button
Stand
Sliding Prevention
Holder
Service terminal
Kensington lock
Connect the power adapter to this jack.
Connect the power cord to the power terminal of the power adapter.
Turns the product on or off.
A stand allows both horizontal and vertical installation.
If your Digital Photo Frame is installed vertically, you can rotate your photos using the rotation function to fit the vertical installation.
Supports the product so that it stays firmly in place on slippery surfaces.
This is a terminal for servicing only. Do not operate it arbitrarily.
The Kensington lock is a device used to physically secure the system when using it in a public place. (The locking device has to be purchased separately.)
| Features | Components |
Side
The product color and shape may vary depending on the model.
Front | Back | Side |
Allows you to insert an optional memory card. (Only applicable for SD/MMC/MS card)
Connect a PC or an external device using a USB cable.
Up stream terminal Connect your Digital Photo Frame to a PC's USB terminal with a
USB cable.
Make sure to use the USB cable (A-mini B type) provided with the product when connecting your digital photo frame to a PC through the up stream terminal.
Down stream terminal Connect your Digital Photo Frame to a USB-supported storage device.
Power
| Power | USB | Memory Card |
Connect the power adapter to the terminal at the back of the product.
Connect the power cord to the power adapter.
Plug the power cord for the product into a nearby outlet.
Press the button at the right of the product to turn the product on.
| Power | USB | Memory Card |
USB
Up Stream
Terminal
Used to connect your digital photo frame to a PC.
When connecting your digital photo frame to a PC through the up stream terminal, make sure to use
Down Stream
Terminal the USB cable provided with the product.
Used to connect an external USB-supporting device to your digital photo frame.
If you connect your USB memory stick product to a USB hub or USB extension, it may not be recognized. Therefore, make sure that the USB memory stick is inserted directly into the USB port.
When connecting an external device to the down stream terminal, use the USB cable provided with the external device. (For more information on external devices and their cables, contact a relevant service center .)
Samsung carries no liability for external device malfunctions caused by using any cable except the standard cables specified for each device.
Some external products provide a cable that does not meet USB standards. Hence, they may cause a malfunction.
If an external storage device does not work normally when connected to your digital photo frame, try to connect it to your PC. If it still does not work normally when connected to your PC, contact a service center for that external device or your PC.
Connect to the up stream terminal of your digital photo frame.
Connect the USB terminal of your PC.
| Power | USB | Memory Card |
Memory Card
SD/MMC/MS CARD Slide the card in the direction marked on the top of the card.
If no button is operated for ten (10) minutes, the screensaver starts to protect the monitor.
However, the screensaver does not start in the slideshow status.
This product is in a touch type. If you touch the button part on the right of the product lightly, the button light is turned on.
When the button light is turned on, you can then operate each button’s menu.
| Usage Guide | Photo | Clock | Settings |
Usage Guide
Direct Functions
Button
MENU
, , ,
Screen Status Indications
Display
Description
Enters or exits a menu.
Hold the MENU button down for more than five (5) seconds. All the lights of the buttons will blink twice and the button lock function will be activated. To clear the button lock function, hold the
MENU button down again for more than five (5) seconds.
Moves around the items and adjusts a value.
Selects a function you want to use.
Returns to the previous screen.
Hold down this button for two (2) seconds to return to the Main screen.
Starts a slideshow.
When playing a slideshow by pressing the [ ] button, the photos in the location of the last played photo are played. If the photos in the location of the last played photo have been removed, they are automatically searched for and then played in a slideshow.
Description
Displayed when a USB device is connected.
Displayed when an SD/MMC/MS memory card is connected.
Photo
When selecting a folder
| Usage Guide | Photo | Clock | Settings |
If you press the Menu button, the menu of the selected item is displayed on the screen.
Menu
Open
Copy
Delete
Opens the selected folder.
Copies the selected folder.
Deletes the selected folder.
The menu displayed when selecting a thumbnail
Description
If you press the Menu button, the menu of the selected item is displayed on the screen.
Menu
Start Slideshow
Copy
Copy All Files
Delete
Delete All Files
Set as Background
Sub Menu
Description
Starts a slideshow
Copies the selected file to a different storage device. (Activated when a storage device is connected.)
Copies all files to a different storage device. (Activated when a storage device is connected.)
Deletes the selected file.
Deletes all files.
Sets the selected image as the background of the main screen.
At this time the setting mode for the background is changed to Custom mode automatically.
When copying a photo from an external memory storage device (SD/MMC/MS, USB memory) to the Frame Memory, if the
[Settings]-[Options]-[Frame Memory Copy] is set to the [Resized], the size (screen quality) of the photo is automatically reduced before saving so that it can be displayed with fit to the screen of your digital photo frame and the EXIF (camera related information) saved in the photo is removed. Thus, make sure to use the photos saved in the Frame Memory only with the digital photo frame.
It may take a long time if a lot of files are copied at a time.
Slide Show
If you press the Menu button, the menu of the selected item is displayed on the screen.
Only photos with a resolution of less than 8000 (width) * 8000 (height) pixels can be displayed on the screen.
Upper OSD
Sub OSD
Effect
Description
Detail OSD
No Effect, Fade, Blind, Cross Comb, Mosaic, Checker, Dissolve, Wipe,
Extend, Silk, Corner, Wheel, Ellipse, Random
Select an effect to give when displaying images on the screen.
Speed Fast, Normal, Slow
Slide Show Settings
Select a speed among Fast, Normal, and Slow.
Mode
All photos, Photos in Folders, Shuffle photos in folders, Repeat one photo
Select the Repeat for displaying images.
Display Clock On, Off
Selects whether to play a slideshow and show the current time at the same time.
Brightness
0~100
Adjust brightness from 0 to 100 levels.
Original, 90°, 180°, 270°
Rotate
Select one among Original, 90°, 180°, and 270°. x1, x2, x4
Zoom
Select this if you want to zoom into a photo. You can magnify it to the x2 or x4 size.
The x1 size is when the photo is set to Fit to Width.
Aspect Ratio
Original Fit, Auto Fit, Fit to Width, Fit to Screen
You can select how to adjust the sizes of photos when displaying them on the screen.
Original Fit
Auto Fit
: When the photo size is larger than the screen size, it is displayed to fit the screen size.
: If the photo size is larger or smaller than the screen size, it is resized to fit
the screen size.
Fit to Width : Photos are displayed with fit to the screen width. A horizontal or vertical part of
a photo may be displayed cut but there is no distortion.
Fit to Screen : Photos are displayed with fit to the resolution of 800*600.
(There may be a distortion in photo image.)
Delete Deletes a photo being displayed in the slideshow.
Set as Background Sets the currently selected image as the background of the main screen.
Direct Functions (Slide Show)
Button Description
MENU Opens the on-screen menu and exits from the menu.
Play the next file in the list.
Play the previous file in the list.
Stop/ Start playing file.
Starts a slideshow.
Clock
| Usage Guide | Photo | Clock | Settings |
If you press the Menu button, the menu of the selected item is displayed on the screen.
Menu
Date and Time
Time Format
Date Format
Clock Type
Sub Menu Detailed Menu
Description
Month, Day, Year, Hour, Minute, am/pm (When Time Format is set to 12 Hours.)
Month, Day, Year, Hour, Minute (When Time Format is set to 24 Hours.)
Sets the date and time.
12 Hours, 24 Hours
For Time Format, you can select 12 Hours or 24 Hours.
If you select 24 Hours, am/pm is not displayed.
YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY
You can select the format in which the date is displayed.
Analog, Digital, Clock & Calendar
You can select a clock type.
| Usage Guide | Photo | Clock | Settings |
Settings
Menu
Sub Menu Detailed Menu
Description
Language
English, Deutsch, Español, Français, Italiano, Nederlands, Polski, Русский,
Português, Svenska, Türkçe, 简体中文, 日本語,한국어
You can select the product language.
Options
Brightness 0~100
Adjusts the brightness of the screen.
Direct Slideshow Off, On
Connect the external storage, and the slide-show starts with its pictures.
Auto Fit Portrait Photo Off, On
If Digital photo frame is laid horizontally, the portrait picture automatically turns around to be able to show the whole picture in Digital photo frame.
Frame Memory Copy Original Size, Resized
When copying a photo from an external memory storage device (SD/MMC/MS, USB memory) to the Frame
Memory, if the [Settings]-[Options]-[Frame Memory Copy] is set to the [Resized], the size (screen quality) of the photo is automatically reduced before saving so that it can be displayed with fit to the screen of your digital photo frame and the EXIF (camera related information) saved in the photo is removed. Thus, make sure to use the photos saved in the Frame Memory only with the digital photo frame.
Preference
Starting Mode Home, Last Mode, Slideshow
You can select the first screen to be displayed when power is turned on.
Screen Saver Slideshow, Clock
You can select the screensaver type.
If no button is operated for ten (10) minutes, the screensaver starts to protect the monitor.
Home Background Default, Custom
You can set the background of the main menu screen.
Auto Picture On/Off Activation, Hour, Minute, am/pm, Repeat
When the time reaches the [Off Time], other operations are stopped and the screen is turned off. When the time reaches the [On Time], the screen is turned on and the previous operating status persists.
If the screen is turned off as the time has reached the [Off Time], press any button except the Power button to display the screen again.
If the product is being used as a Mini-Monitor or a Mass Storage device connected to your PC via a
USB cable, the screen will not be turned off even if the time reaches the Off Time.
Firmware Update
You can update the product by using a USB memory stick or memory card
(SD/MMC/MS).
For the latest firmware file, visit www.samsung.com
.
Update/Reset
Reset Settings Yes, No
Initializes the settings to the factory defaults.
Product Information Model, Firmware Version
You can check the product information.
I want to update firmware.
Preparations
Digital Photo Frame
Firmware update file.
USB memory card or external memory devices(SD/MMC/MS)
Please visit www.samsung.com
for the latest firmware update.
Connect USB memory card to PC
If you are ready, connect the USB memory card to your PC.
Copy the firmware update file you downloaded to the USB memory card.
(Make sure to copy the firmware update file to the root directory.)
Connect USB
Memory Card to Digital
Photo Frame
Updating
Remove the USB memory card from your PC, and connect it to your Digital Photo Frame.
If your Digital Photo Frame is off, turn it on.
Select [Firmware Update] on the [Settings]-[Update/Reset] page.
The update progression is displayed on the screen.
When the update finishes, turn your Digital Photo Frame off, remove the USB memory card, and turn your Digital Photo Frame on again, for maximum safety.
Do not remove the USB memory card during the update operation.
Do not press any key during the update operation.
Do not insert any other card during the update operation.
Do not turn your Digital Photo Frame off during the update operation.
You can identify whether the update operation has finished successfully or not by checking the firmware version of your Digital Photo Frame is changed to the version of the firmware update.
The Digital Photo Frame not only allows you to appreciate photos but also provides an additional
Mini-Monitor function. The Mini-Monitor is a function for using the Digital Photo Frame as an auxiliary monitor. Its usage is simple as the Digital Photo Frame connects to your PC via a USB cable.
This function allows you to work more efficiently at your PC by using an additional monitor. To use your digital photo frame as a Mini-Monitor, first install the Frame Manager program. (However, please note that you can use only one digital photo frame as a Mini-Monitor.)
Installing Frame Manager guide
Frame Manager User's Manual
Using your digital photo frame as a Mini-Monitor.
Using your digital photo frame as Mass Storage.
Changing the current mode to another mode
Adjusting the brightness
Updating the firmware
System Requirements z z z
OS : Windows XP SP2
USB : Extended Host Controller (EHCT) for USB 2.0
RAM : 256 MB or above
Caution
1. Windows XP Service Pack 2 must be installed.
It might not operate with any operating systems other than Windows XP SP2. We are not liable for problems that may occur when installing it on an operating system other than Windows XP SP2.
2. We recommend a CPU speed of 2.4 GHz or higher.
Your digital photo frame might not operate normally if the performance specifications of your PC are lower than the recommendations.
3. Make sure to install it correctly as directed in the Installation Guide.
4. Do not use your Mini-Monitor as a primary monitor.
We are not liable for any problems that may occur if you do not follow the directions. If it is used as a primary monitor, the screen may be blank.
5. Make sure to use the provided USB cable.
6. When operated as Mini-Monitor, All buttons except "power, ▲/▼" don't operate.
7. Move the programs displayed and used on the Mini-Monitor to the primary monitor after you have finished using it.
8. The Mini-Monitor may not operate with some video cards. In this case, set the ‘Hardware acceleration’ value to ‘None’.
To set Hardware acceleration to None: Right-click on the Windows Desktop and select Properties from the displayed menu. The Display Properties window appears. Click Settings > Advanced > Troubleshoot tab. Move the Hardware acceleration slide to None.
Specifications
Model Name
Panel
Supported Formats
Built-in Memory
USB
Memory Card
Power
Items
Type
Resolution
Interface
| SPF-75H, SPF-76H | SPF-85H, SPF-86H |
Specifications
SPF-75H, SPF-76H
7" (17 cm) TFT
800 x 480
RGB 6bit TTL
JPEG (Progressive,CMYK JPEG is not supported.)
1 GB
One upstream (device 2.0) and one downstream (host 1.1)
SD/MMC/MS (FAT32)
External DC power adapter (12V, 2A, 24W) Rating
Consumption
Power off mode : under 1W
Dimensions (WxHxD) 215.5 x 156.5 x 43 mm / 8.5 x 6.2 x 1.7 inch
General
Weight 525 g / 1.2 lb
Model Name
Panel
Items
Type
Resolution
| SPF-75H, SPF-76H | SPF-85H, SPF-86H |
Specifications
SPF-85H, SPF-86H
8" (20 cm) TFT
800 x 600
Interface RGB 6bit TTL
Supported Formats
Built-in Memory
USB
Memory Card
Power
Rating
JPEG (Progressive JPEG is not supported.)
1 GB
One upstream (device 2.0) and one downstream (host 1.1)
SD/MMC/MS (FAT32)
External DC power adapter (12V, 2A, 24W)
Consumption
Power off mode : under 1W
Dimensions (WxHxD) 228 x 187.5 x 46 mm / 8.9 x 7.4 x 1.8 inch
General
Weight 700 g / 1.5 lb
The product design may differ according to the model, and specifications are subject to change without prior
notice for product performance enhancement.
Class B Equipment (Information Communication equipment for residential use)
This product complies with the Electromagnetic Compatibility Directives for residential Use and can be used in all areas including common residential areas. (Class B equipment radiates less electromagnetic influences than class A equipment.)
| Troubleshooting | Terminology | Service Centers |
Troubleshooting
This section lists various problems and solutions encountered by users while using the digital photo frame. When encountering a problem, first check the list below and follow the suggested action if one matches your problem. If the problem still persists, contact or visit the nearest service center .
Symptoms Causes and Actions
The power does not turn on.
Check the connections for the adapter cable and the power terminal of the product.
It takes a time until an image is displayed after the power is turned on.
It takes a time to transit to the next photo.
I have connected an external storage device but it is not recognized.
There is a remaining space in the
Frame Memory but I cannot copy photos.
I inserted a memory card but it does not operate.
I connected a USB memory but it does not operate.
A portrait photo is displayed rotated to landscape.
No slideshow is played automatically.
Auto On and Auto Off do not operate.
In case the resolution is high or the file size is large, the photo may be displayed slowly on the screen.
Please check the connection between product and external storage.
Connect to PC and check the operation state.
Create a folder in the Fame Memory and copy your photos.
Check the files of your memory card.
Please try a different storage device.
Check whether [Auto Fit Portrait Photo] of the [Settings-Options] is set to
Activated.
Set [Starting Mode] of [Settings-Preference] to [Slideshow].
The icon of the FrameManager is not displayed.
I pressed a button, but it does not operate.
If the Auto On and Auto Off are set to the same time, they do not operate.
Check the time settings.
Check whether the FrameManager program is installed.
Select Start- Programs - Samsung - FrameManager to restart the
FrameManager.
Reboot your computer.
Check whether the button lock function is activated.
If you hold down the MENU button for more than five (5) seconds, the button lock function is activated. If you press a button it will not operate.
To clear the button lock function, hold down MENU button for more than five
(5) seconds again.
Terminology
Terms
| Troubleshooting | Terminology | Service Centers |
Description
JPEG
(Joint Photographic
Coding Expert Group)
JPEG is an image compression technology. It provides the smallest loss of all image compression technologies. It is used widely to transmit multimedia files on the Internet and for other uses. An image file formatted in the JPEG format is called a JPEG or JPG file. Usually, a JPEG file is created by taking a picture with a digital camera, by drawing on a computer, or by a graphic package and then by compressing the graphics image into the JPEG format.
SD Card
(Secure Digital Card)
MMC
(Multi Media Card)
USB Cable
1) A-B TYPE
An SD card is a Flash memory card the size of a postage stamp. It provides high stability and high capacity. It is widely used in various digital products such as PDAs, digital cameras, MP3 players, cell phones, and notebook PCs. Its appearance is similar to that of MMC, but the number of pins and their thickness is different. It also has a password setting function for data security.
MMC is external Flash memory used for small mobile devices, as in the case of the SD card. Because it has smaller footprints than SD/MMC cards, it has become widely accepted as the standard for memory cards. It is usually used to save movies and photos.
Use the up stream terminal when connecting to a PC. This product supports
USB 2.0. An A-B type cable which is used to connect your digital photo frame to a PC is provided with the product. The A type is the USB connector used to connect to a PC. The B type is the USB connector used to connect to an external device. You can connect your digital photo frame to a PC using an A-B type USB cable.
USB Cable
2) Cable for
Connecting Other
Devices
Use this type of cable when using the down stream terminal. This product supports USB 2.0. When connecting an external device to the down stream terminal, use the USB cable provided with the external device.
| Troubleshooting | Terminology | Service Centers |
Service Centers
If you need a product service, contact or visit a Samsung service center .
For services for network connection and the Server.
Services Contacts
Samsung Electronics web site www.samsung.com
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
U.S.A
CANADA
MEXICO
North America
1-800-SAMSUNG(726-7864)
1-800-SAMSUNG(726-7864)
01-800-SAMSUNG(726-7864) http://www.samsung.com
http://www.samsung.com/ca http://www.samsung.com
ARGENTINE
BRAZIL
CHILE
COLOMBIA
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
HONDURAS
JAMAICA
NICARAGUA
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
AUSTRIA
BELGIUM
CZECH REPUBLIC
DENMARK
EIRE
FINLAND
FRANCE
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
Latin America
0800-333-3733
0800-124-421, 4004-0000
800-SAMSUNG(726-7864)
01-8000 112 112
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
800-7919267
1-800-234-7267
00-1800-5077267
800-7267
1-800-682-3180
1-800-751-2676
1-800-SAMSUNG(726-7864)
0-800-100-5303
Europe
0800-SAMSUNG(726-7864)
0032 (0)2 201 24 18
844 000 844 http://www.samsung.com/ar http://www.samsung.com
http://www.samsung.com/cl http://www.samsung.com/co http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/latin http://www.samsung.com/at http://www.samsung.com/be http://www.samsung.com/cz
70 70 19 70
0818 717 100
030-6227 515
3260 SAMSUNG
08 25 08 65 65(€ 0,15/Min)
01805 - SAMSUNG(726-7864) (€ 0,14/Min)
06-80-SAMSUNG(726-7864)
800 SAMSUNG (726-7864)
0035 (0)2 261 03 710
0900 SAMSUNG(726-7864)
815-56 480
0 801 801 881, 022-607-93-33
80820-SAMSUNG(726-7864)
0800-SAMSUNG(726-7864)
902 10 11 30
0771-400 200 http://www.samsung.com/dk http://www.samsung.com/ie http://www.samsung.com/fi http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com/be http://www.samsung.com/nl http://www.samsung.com/no http://www.samsung.com/pl http://www.samsung.com/pt http://www.samsung.com/sk http://www.samsung.com
http://www.samsung.com/se
AUSTRALIA
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
NEW ZEALAND
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
SOUTH AFRICA
TURKEY
U.A.E
SWITZERLAND
U.K
ESTONIA
LATVIA
LITHUANIA
KAZAKHSTAN
KYRGYZSTAN
RUSSIA
TADJIKISTAN
UKRAINE
UZBEKISTAN
0800-SAMSUNG(726-7864)
0845 SAMSUNG (7267864)
800-7267
800-7267
8-800-77777
8-10-800-500-55-500
00-800-500-55-500
8-800-555-55-55
8-10-800-500-55-500
8-800-502-0000
8-10-800-500-55-500
CIS
Asia Pacific
1300 362 603
800-810-5858, 010- 6475 1880
3698-4698
3030 8282, 1800 110011
0800-112-8888
0120-327-527
1800-88-9999
0800SAMSUNG(726-7864)
1800-10-SAMSUNG(726-7864)
1800-SAMSUNG(726-7864)
1800-29-3232, 02-689-3232
0800-329-999
1 800 588 889
Middle East & Africa
0860-SAMSUNG(726-7864 )
444 77 11
800-SAMSUNG(726-7864)
8000-4726 http://www.samsung.com/ch http://www.samsung.com
http://www.samsung.ee
http://www.samsung.com/lv http://www.samsung.lt
http://www.samsung.kz
http://www.samsung.ru
http://www.samsung.com
http://www.samsung.uz
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com/hk http://www.samsung.com
http://www.samsung.com
http://www.samsung.com/jp http://www.samsung.com/my http://www.samsung.com/nz http://www.samsung.com/ph http://www.samsung.com
http://www.samsung.com
http://www.samsung.com/tw http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Safety Symbols
- 2 Power
- 4 Installation
- 5 Using and Cleaning
- 6 Correct Disposal of This Product
- 7 Features
- 7 Components
- 8 Front
- 8 Back
- 9 Side
- 10 Power
- 10 USB
- 11 Memory Card
- 12 Usage Guide
- 13 Photo
- 15 Clock
- 15 Settings
- 19 SPF-75H, SPF-76H
- 19 SPF-85H, SPF-86H
- 21 Troubleshooting
- 22 Terminology
- 22 Service Centers