Cyberoam Virtual CCC Appliance Installation Guide
Pubblicità
Pubblicità
Virtual CCC Appliance
VMware Workstation
Installation Guide
VCCC Appliance VMware Workstation Installation Guide
Contents
VCCC Appliance VMware Workstation Installation Guide
Typographic Conventions
All contents in this guide including text or screenshots follow the given list of conventions.
Item
Server
Client
User
Username
Topic titles
Convention
Shaded font typefaces
Example
Machine where CCC Software - Server component is installed
Machine where CCC Software - Client component is installed
The end user
Username uniquely identifies the user of the system
Introduction
Subtitles Bold & Black typefaces
Notation conventions
Navigation link Bold typeface Group Management Groups Create it means, to open the required page click on Group management then on Groups and finally click Create tab
Name of a particular parameter / field / command button text
Lowercase italic type
Enter policy name, replace policy name with the specific name of a policy
Or
Click Name to select where Name denotes command button text which is to be clicked
Cross references
Notes & points to remember
Hyperlink in different color
Bold typeface between the black borders
Refer to Customizing User database Clicking on the link will open the particular topic
Note
Prerequisites Bold typefaces between the black borders
Prerequisite
Prerequisite details
VCCC Appliance VMware Workstation Installation Guide
Preface
Welcome to CCC VMware Workstation Installation and Deployment Guide. This guide describes how to deploy and run Cyberoam Central Console as a virtual machine on VMware Workstation platform.
System Requirements
The hardware requirement for installing CCC virtual machine is dependent on number of appliance(s) to be managed by CCC virtual machine. Following table outlines the important hardware components and their recommended availability.
Model
CCCV 15
CCCV 50
CCCV 100
CCCV 200
CCCV 500
Appliances
Supported
15
50
100
200
500
CPU
1.6 GHz
1.8 GHz
2.6 GHz
3.0 GHz
6.0 Ghz
RAM
2 GB free space
(Minimum)
4 GB free space
(Minimum)
4 GB free space
(Minimum)
4 GB free space
(Minimum)
4 GB free space
(Minimum)
Hard Disk Drive Browser
SATA or SCSI hard disk with minimum 32+80
GB free disk space
SATA or SCSI hard disk with minimum 32+160
GB free disk space
SATA or SCSI hard disk with minimum 32+250
GB free disk space
SATA or SCSI hard disk with minimum 32+320
GB free disk space
SATA or SCSI hard disk with minimum 32+320
GB free disk space
Microsoft
Internet
Explorer 7.0+
Mozilla Firefox
3.0+
Chrome
Best view -
Mozilla Firefox
3.0+
Installation Procedure
Pre-requisite
Make sure that VMware Player 4.0/5.0 is already installed in your network.
Please refer to http://www.vmware.com/ for details.
Installation procedure covers:
CCC Virtual Machine Installation
CCC Virtual Machine Management
VCCC Appliance VMware Workstation Installation Guide
CCC Virtual Machine Installation
1. Download and Extract OVF Package
Download .zip file which contains Cyberoam Central Console OVF Package and store it in your machine.
2. Open CCC Virtual Machine
Note
Please note that in this guide the CCC virtual machine is opened through VMware player.
You can use VMware workstation to open CCC virtual machine.Make sure that VMware Workstation
7.0/8.0/9.0 is already installed in your network.
Start VMware Player and open the .ovf file in VMware player.
Screen – Open .ovf file
VCCC Appliance VMware Workstation Installation Guide
Screen – Open CCC Virtual Machine
Select the CCC Virtual machine and click ‘Play virtual machine’ link to start CCC virtual machine.
Screen – Import CCC Virtual Machine
VCCC Appliance VMware Workstation Installation Guide
Screen – Open CCC Virtual Machine
VCCC Appliance VMware Workstation Installation Guide
CCC Virtual Machine Management
Management of CCC Virtual machine includes
Virtual CCC Basic Configuration
Virtual CCC Basic Configuration
1. After successful activation of CCC Virtual machine, browse to default ( http://172.16.16.16
) or the configured IP address to access Web Admin Console of Virtual CCC. Use following default credentials to access and manage Virtual CCC from Web.
Username: admin
Password: admin
2. Once you login to CCC Web admin console you can change interface(s) IP address from
Management Console CCC Management Network Interface.
Screen – Change Interface IP Address
Change default gateway IP address from Management Console
CCC Management
Network Gateway.
Screen – Change Gateway IP Address
3. Configure DNS from Management Console
CCC Management Network DNS.
Screen – Configure DNS
4. Set time zone and current date from Management Console CCC Management
System Time
VCCC Appliance VMware Workstation Installation Guide
Screen – Time Settings
Congratulations!!!
This finishes the basic configuration of Virtual CCC and you are now ready to use the Virtual machine.
Other Configurations
1. Create Customer Account and register Virtual CCC
Browse to http://customer.cyberoam.com
and click Register and follow the on-screen steps. It will create your customer account as well as register your Virtual CCC.
2. Configure Cyberoam to communicate with Virtual CCC
Enable management of the Cyberoam appliance by Virtual CCC from System
Administration Central Management and enter IP address or domain name of
Virtual CCC appliance.
Select heartbeat protocol to communicate with Virtual CCC.
Make sure, Virtual CCC can receive heartbeat information on port 514 for Syslog and port 80 for
HTTP.
Screen – Configure CCC in Cyberoam
VCCC Appliance VMware Workstation Installation Guide
3. Access Virtual CCC Web Admin Console
Browse to https://<IP address of Virtual CCC> and log on using the default username (admin) and password (admin).
Note:
Internet Explorer 7+ or Mozilla Firefox 3.0+ is required to access the CCC Web Admin Console.
4. Configure Virtual CCC to add and manage Cyberoam
Add Cyberoam appliance to CCC from Management Console
Appliance
Management Appliance(s).
Screen – Add Appliance(s)
Specify Appliance Name to identify added Cyberoam appliance.
Specify Appliance Key.
Specify routable IP Address of the Cyberoam appliance.
Specify Administrator Username and Password of the Cyberoam appliance.
Specify communication mode to manage Cyberoam appliance from CCC. o
Central Management will push updates to this Appliance:
Select if the managed Cyberoam appliance is directly accessible from CCC i.e. there is no intermediate NAT box. Specify access protocol and port number to communicate with managed Cyberoam appliance.
VCCC Appliance VMware Workstation Installation Guide
o
This Appliance will fetch updates from Central Management
Select if the managed Cyberoam appliance is behind NAT box e.g. ADSL. In that case
1. Managed Cyberoam appliance will first poll CCC appliance in interval of 1 (one) minute for any configuration updates available.
2. If the updates are available the managed Cyberoam appliance will pull those updated configuration settings.
Please refer to http://kb.cyberoam.com
for details.
Select CCC administrator user who can access and manage the appliance. Only the selected administrator will be allowed.
Specify additional details for the administrator user e.g. name, email id and contact address.
5. Access Help
For accessing online help, click the Help button or F1 key on any of the screens to access the corresponding topic's help. Use the Contents and Index options to navigate through the entire online help
Additional Resources
Visit following links for more information on Cyberoam Central Console
Technical Documentation – http://docs.cyberoam.com
Cyberoam Knowledge Base – http://kb.cyberoam.com
Cyberoam Security Center – http://csc.cyberoam.com
Cyberoam Upgrades – http://download.cyberoam.com
VCCC Appliance VMware Workstation Installation Guide
Virtual Cyberoam Central Console Trademark
Cyberoam, Cyberoam logo, Virtual Cyberoam Central Console (Virtual CCC) are trademarks of Cyberoam
Technologies Private Limited. All other trademarks, if any, belong to their respective owners
Scarica
Pubblicità