Dangerfield September 2009V3.0
User Guide for DS150E with Vista
Delphi PSS
1
Main component.…………………….…….3
Installation instructions………….….……5
Bluetooth Communication setup.….….30
Diagnostic Program……….……………..39
File………………………………….……….41
Settings………………………….…….……43
Documents……………………….………..51
Help……………………….........................53
OBD Communication………….…………56
Print and Save………………….…………66
Real Time Data…………………………...73
Adjust Parameters…………………........80
Component Activation ………………….83
Dangerfield September 2009V3.0
Delphi PSS
CONTENTS
Write to ECU (OBD)………….……...............86
Scan…………………………………………….89
History………………………………………….94
EOBD Communication……….…..………...97
Read Fault codes (EOBD)………… ………100
Erase Fault codes (EOBD)…………………103
Real Time Data (EOBD)…………………….106
Freeze frame Data (EOBD)…………………110
Oxygen Sensor (EOBD)…………………….113
Non-continuous tests (EOBD)…….………116
Control of System (EOBD)……………..….119
Summary of vehicle info. (EOBD)………..103
Vehicle Information (EOBD)………………122
2
Dangerfield September 2009V3.0
MAIN COMPONENTS
Delphi PSS
3
Main Components
Bluetooth dongle
Vehicle Communication Interface (V.C.I.)
Dangerfield September 2009V3.0
Delphi PSS
4
INSTALLATION INSTRUCTIONS
Dangerfield September 2009V3.0
Delphi PSS
5
Delphi Diagnostics Installation guide for Vista.
Before proceeding with this guide, please ensure that if you have Bluetooth on your unit it is now turned off / disabled and any associated Bluetooth software and drivers are uninstalled. If you are unaware on how to do this please contact your hardware manufacturer.
The disabling of onboard Bluetooth can sometimes disable Wi-Fi systems. Check with the hardware manufacturer to confirm if the Bluetooth can be disabled separately in the
BIOS
Dangerfield September 2009V3.0
Delphi PSS
6
Software requirements
The Delphi Diagnostic software Laptop / PC minimum requirements are as follows:
Windows 2000/XP/Vista
(For XP you must be running service pack 2 or later)
Pentium 800 MHz, or similar
USB (optional Bluetooth)
256 MB internal memory
250 MB hard disk space (program size)
Resolution: 1024x768, High Colour (16 bits)
Please Note if used on wide screen format laptop’s “clipping” or a reduction in screen display will occur meaning you will not be able to see the lower 2 selection boxes. You may need to change your screen resolution to 800 x 600 or 1024 x 768 to display the software correctly.
Dangerfield September 2009V3.0
Delphi PSS
7
Turn off UAC (User access controls)
Go to control panel then select user accounts within the user account option select “Turn user account control on - off”
Dangerfield September 2009V3.0
Delphi PSS
8
De-select the box so there is no tick in the box, then click OK & say yes to reboot PC.
Dangerfield September 2009V3.0
Delphi PSS
9
Installation of Microsoft Vista help fix
Next install the Microsoft Windows help fix to enable you to view the help files that are included with the;
“Delphi Diagnostics Windows Vista Bluetooth Drivers and Documentation”.
Click Start
Click Computer,
Click on the CD/DVD drive icon
Click on the folder called “Vista 32bit help file fix”
Dangerfield September 2009V3.0
Delphi PSS
10
Click on the file called “Windows6.0-KB917607-x86.msu”
And follow the onscreen instructions to complete the installation.
Installation of the Kensington Bluetooth drivers for Microsoft Vista.
Insert the Kensington Bluetooth device into your USB port. Microsoft windows Vista will detect the new hardware and will pop up the following window.
Dangerfield September 2009V3.0
Select the “Locate and install driver software” option.
Delphi PSS
11
This will show the following window, insert the CD labelled Microsoft Vista Drivers for
Kensington Bluetooth Dongle that came with your diagnostic pack then click “Next”
Dangerfield September 2009V3.0
Delphi PSS
12
The following window is shown while windows automatically searches and installs the driver from the CD.
Dangerfield September 2009V3.0
Delphi PSS
13
Windows will now locate and install the drivers. During the installation you may see the following window.
Select the Install this driver software anyway and the installation will continue.
Dangerfield September 2009V3.0
Delphi PSS
14
While the driver software is being installed then the following window is displayed.
Dangerfield September 2009V3.0
Delphi PSS
15
When the installation is finished the following window is shown and the Bluetooth hardware is ready for use.
Dangerfield September 2009V3.0
Click “Close”.
Delphi PSS
16
Installing Delphi Diagnostic software
Insert the Delphi Diagnostics CD into the CD drive
Open “My Computer” and click on you CD drive (example below)
Dangerfield September 2009V3.0
Delphi PSS
17
Installing Delphi Diagnostic software 2
Dangerfield September 2009V3.0
Select product and country then click next
Delphi PSS
18
Installing Delphi Diagnostic software 3
Dangerfield September 2009V3.0
Tick the box and then click next
Delphi PSS
19
Installing Delphi Diagnostic software 4
Dangerfield September 2009V3.0
Delphi PSS
20
Installing Delphi Diagnostic software 5
Dangerfield September 2009V3.0
Delphi PSS
21
Installing Delphi Diagnostic software 6
Dangerfield September 2009V3.0
To complete installation and install USB drivers click O.K.
Delphi PSS
22
Installing Delphi Diagnostic software 7
Dangerfield September 2009V3.0
Delphi PSS
23
Installing Delphi Diagnostic software 8
Dangerfield September 2009V3.0
Delphi PSS
24
Windows will now tell you it’s can’t verify the publisher of the driver select
“Install this driver software anyway”
Dangerfield September 2009V3.0
Delphi PSS
25
Setup the shortcut link For Delphi Diagnostic software
You should now have a link on the desktop of your PC called “Diagnostic”.
Right click on the icon and left click on “properties”.
the following boxes and select “Windows XP” in compatibility mode
Dangerfield September 2009V3.0
If this option is greyed out follow the addition instructions below.
Delphi PSS
26
Select “shortcut” tab & “Advanced”
Dangerfield September 2009V3.0
Delphi PSS
27
Tick the box to “Run as Administrator”.
Dangerfield September 2009V3.0
Delphi PSS
28
Bluetooth Communication Setup.
Open BT by selecting icon from system tray in the bottom right corner of the screen.
Select “Add Bluetooth Device”
Dangerfield September 2009V3.0
Delphi PSS
29
BLUETOOTH COMMUNICATION
SET UP
Dangerfield September 2009V3.0
30
Delphi PSS
Power up your VCI and select “My device is set up and ready to be found” and click “next”
Dangerfield September 2009V3.0
Delphi PSS
31
Unit will now start to search for device
Dangerfield September 2009V3.0
Delphi PSS
32
Select “Delphi DSxxxE BT” device and click “Next”
Dangerfield September 2009V3.0
Delphi PSS
33
Enter Pass key for mini VCI as “0” then select next
Dangerfield September 2009V3.0
Delphi PSS
34
Bluetooth will now setup its link to the Delphi VCI.
Dangerfield September 2009V3.0
Delphi PSS
35
Select “Finish”, your Bluetooth is now setup.
Make a note of the “Outgoing” port number you will need this later to configure the link from the Bluetooth to the Delphi software.
Dangerfield September 2009V3.0
Delphi PSS
36
Setting the diagnostic software to communicate via Bluetooth
Dangerfield September 2009V3.0
If auto search fails, select manual
Delphi PSS
37
Ensure that com port is identical to the port quoted in page 35, if not select the correct port from the drop down menu.
Bluetooth configuration is then complete.
Click “OK”, or update to update firmware .
Dangerfield September 2009V3.0
Delphi PSS
38
Dangerfield September 2009V3.0
DIAGNOSTIC PROGRAM
Delphi PSS
39
Main Diagnostic screen
Dangerfield September 2009V3.0
Delphi PSS
40
Dangerfield September 2009V3.0
FILE
Delphi PSS
41
Opens any saved documents in report folder
Dangerfield September 2009V3.0
Delphi PSS
42
SETTINGS
Dangerfield September 2009V3.0
Delphi PSS
43
Dangerfield September 2009V3.0
Alternative access to Language and
Hardware set up
Delphi PSS
44
Dangerfield September 2009V3.0
Alternative access to Workshop and
Hardware set up
Delphi PSS
45
Alternative access to Workshop and
Language set up
Dangerfield September 2009V3.0
Click search to find VCI
Delphi PSS
46
Dangerfield September 2009V3.0
Delphi PSS
47
Dangerfield September 2009V3.0
Delphi PSS
A successful connection will result in the comport number, serial number of the VCI and firmware version being displayed
48
After connection for the first time the firmware should be updated, follow the on-screen instructions
Dangerfield September 2009V3.0
Delphi PSS
49
When completed click O.K.
Dangerfield September 2009V3.0
Delphi PSS
50
Dangerfield September 2009V3.0
DOCUMENTS
Delphi PSS
51
Connects to application file
Opens notepad
Shows release news
Specifies Computer system requirements
Dangerfield September 2009V3.0
Delphi PSS
52
Dangerfield September 2009V3.0
HELP
Delphi PSS
53
Sets hardware to demo mode
Opens hardware key box
Dangerfield September 2009V3.0
Delphi PSS
54
Dangerfield September 2009V3.0
Delphi PSS
55
Dangerfield September 2009V3.0
OBD COMMUNICATION
Delphi PSS
56
Dangerfield September 2009V3.0
Select Brand, Model and model year
Delphi PSS
57
Dangerfield September 2009V3.0
Select type of system and engine code
Delphi PSS
58
Select Gearbox option then click OBD engine icon
Dangerfield September 2009V3.0
Delphi PSS
59
Dangerfield September 2009V3.0
Delphi PSS
60
Read Fault Codes
Dangerfield September 2009V3.0
Delphi PSS
61
Dangerfield September 2009V3.0
Delphi PSS
62
Erase fault codes
Dangerfield September 2009V3.0
Delphi PSS
63
Dangerfield September 2009V3.0
Delphi PSS
64
Return to main screen or select another option
Dangerfield September 2009V3.0
Delphi PSS
65
Dangerfield September 2009V3.0
PRINT AND SAVE
Delphi PSS
66
Dangerfield September 2009V3.0
Delphi PSS
Click print /save icon
67
Dangerfield September 2009V3.0
Add any information required
Click print icon
Delphi PSS
68
Dangerfield September 2009V3.0
Delphi PSS
Select printer
Click Print
69
Dangerfield September 2009V3.0
To save information click save icon
Delphi PSS
70
Dangerfield September 2009V3.0
Add title
Delphi PSS
Click save
71
Dangerfield September 2009V3.0
Return to main screen
Delphi PSS
Print and save function
72
REAL TIME DATA
Dangerfield September 2009V3.0
Delphi PSS
73
Real Time Data
Dangerfield September 2009V3.0
Delphi PSS
74
Dangerfield September 2009V3.0
Screen Navigation
Delphi PSS
List Mode
75
Dangerfield September 2009V3.0
Delphi PSS
Graph Mode
76
Use scroll bar to view all items on data list
Dangerfield September 2009V3.0
Return to list mode
Delphi PSS
77
Dangerfield September 2009V3.0
Delphi PSS
Custom data list
78
Select item, click arrow to transfer to selected list
Dangerfield September 2009V3.0
Click arrow to remove selected item
Remove all items
Delphi PSS
79
Dangerfield September 2009V3.0
ADJUST PARAMETERS
Delphi PSS
80
Adjust
Dangerfield September 2009V3.0
Delphi PSS
81
Dangerfield September 2009V3.0
Return
Delphi PSS
82
Dangerfield September 2009V3.0
COMPONENT ACTIVATION
Delphi PSS
83
Component Activation
Dangerfield September 2009V3.0
Delphi PSS
84
Dangerfield September 2009V3.0
Return
Delphi PSS
85
Dangerfield September 2009V3.0
WRITE TO ECU (OBD)
Delphi PSS
86
Dangerfield September 2009V3.0
Write
Delphi PSS
87
Dangerfield September 2009V3.0
Return
Delphi PSS
88
Dangerfield September 2009V3.0
SCAN
Delphi PSS
89
Dangerfield September 2009V3.0
Scan Function
Delphi PSS
90
Dangerfield September 2009V3.0
Click O.K.
Delphi PSS
91
Dangerfield September 2009V3.0
Return
Print/save function
Delphi PSS
92
Click on item to view faultcodes
Highlight item, then click icon to delete
Dangerfield September 2009V3.0
Click to return to main screen
Delphi PSS
93
HISTORY
Dangerfield September 2009V3.0
Delphi PSS
94
History (past vehicle connections)
Dangerfield September 2009V3.0
Delphi PSS
95
Return to main screen
Dangerfield September 2009V3.0
Exit Program
Delphi PSS
Delete Entry
96
Dangerfield September 2009V3.0
EOBD COMMUNICATION
Delphi PSS
97
Click on icon to enter EOBD program
Dangerfield September 2009V3.0
Delphi PSS
98
Main EOBD information page
Dangerfield September 2009V3.0
Delphi PSS
99
READ FAULTCODES (EOBD)
Dangerfield September 2009V3.0
Delphi PSS
100
Read Faultcodes
Dangerfield September 2009V3.0
Delphi PSS
101
Dangerfield September 2009V3.0
Delphi PSS
102
ERASE FAULT CODES (EOBD)
Dangerfield September 2009V3.0
Delphi PSS
103
Erase fault codes
Dangerfield September 2009V3.0
Delphi PSS
104
Dangerfield September 2009V3.0
Delphi PSS
105
REAL TIME DATA (EOBD)
Dangerfield September 2009V3.0
Delphi PSS
106
Real time data
Dangerfield September 2009V3.0
Delphi PSS
107
2 Tick box to graph
3 Click icon to graph
1 Click on a line to transfer to data panel
Dangerfield September 2009V3.0
Delphi PSS
108
Dangerfield September 2009V3.0
Clear selection and return to data screen
Return to data screen
Clears Graph
109
Delphi PSS
FREEZE FRAME DATA (EOBD)
Dangerfield September 2009V3.0
Delphi PSS
110
Freeze Frame Data
Dangerfield September 2009V3.0
Delphi PSS
111
Dangerfield September 2009V3.0
Delphi PSS
112
Dangerfield September 2009V3.0
OXYGEN SENSOR (EOBD)
Delphi PSS
113
Dangerfield September 2009V3.0
Oxygen sensor
Delphi PSS
114
Dangerfield September 2009V3.0
Delphi PSS
115
NON-CONTINUOUS TESTS (EOBD)
Dangerfield September 2009V3.0
Delphi PSS
116
Dangerfield September 2009V3.0
Non-continuous tests
Delphi PSS
117
Dangerfield September 2009V3.0
Delphi PSS
118
CONTROL OF SYSTEM (EOBD)
Dangerfield September 2009V3.0
Delphi PSS
119
Dangerfield September 2009V3.0
Control of system
Delphi PSS
120
Dangerfield September 2009V3.0
Delphi PSS
121
VEHICLE INFORMATION (EOBD)
Dangerfield September 2009V3.0
Delphi PSS
122
Dangerfield September 2009V3.0
Vehicle information
Delphi PSS
123
Dangerfield September 2009V3.0
Delphi PSS
124
HAPPY DIAGNOSIS!
Dangerfield September 2009V3.0
Delphi PSS
125
