IMAGE Transmitter 2
User Guide [Operation]
This guide describes the procedure to use our camera connected to a
computer with the IMAGE Transmitter 2 application software to
perform shooting.
• For the procedure to install the software on your computer and to connect your camera to
the computer, refer to the provided “User Guide [Installation]”.
• The screen illustrations in this guide are examples. The displayed screens may differ
depending on your camera and computer.
Starting IMAGE Transmitter 2
1
Exiting IMAGE Transmitter 2
1
Connect the camera to a computer.
Click
on the IMAGE Transmitter 2
screen.
For details on connecting the camera, refer to the
provided “User Guide [Installation]”.
2
Turn the camera on.
3
Double-click the [IMAGE Transmitter 2]
icon on the desktop.
2
The IMAGE Transmitter 2 screen appears.
u Caution
• Select [PTP] in [USB Connection] of the D menu on
the camera before connecting the camera. The
software does not operate correctly if [MSC] is
selected.
2
Turn the camera off.
IMAGE Transmitter 2 Screen
1
15
16
2
3
17
4
18
5
6
7
8
9
10
11
12
19
20
21
13
14
22
3
1
[Version Info] button
8
Displays the version of the IMAGE Transmitter 2.
2
3
Click the button to capture an image.
Save destination
9
Performs autofocus.
to set the save destination.
Autofocus is performed in x mode regardless
Camera model name/Connection status
of the Autofocus Method setting of the camera.
Click
When the Autofocus Method is set to y,
to connect with or disconnect from the
camera.
autofocus is performed by clicking
When the camera has been recognized correctly,
while the Live View image is displayed in the
0 appears.
IMAGE Transmitter 2.
Battery level/Camera settings
5
File format/Remaining image storage
only
10 LV button
Displays the Live View image in the Live View
window.
capacity of memory card
Click the button again to exit the Live View mode.
Shutter speed/Aperture value/ISO
11 [AF When Released] check box
sensitivity/Exposure compensation value
Select the check box (T) to perform autofocus
Click the arrow to open the pull-down list and
before shooting when
change the setting of each item.
7
AF button
Displays the save destination for images. Click
4
6
Shooting button
is clicked.
12 [Save to Card] check box
Green button
Clear the check box (S) to not save images to the
Performs the same operation as that assigned to
memory card in the camera.
the Green button of the camera.
4
13 [File Format to Transfer] check box
18 AF frame
Select the check boxes of the desired file formats
Click the Live View image to move the AF frame
for the images saved to the computer.
and perform autofocus at the clicked position when
If the check boxes of all file formats are cleared
the focus mode is set to v.
(S), images are not saved to the computer.
When the focus mode is set to w,
can be used to magnify the image at the clicked
14 Message area
position.
Displays the status for communication with the
19 [Click Action] button
camera and error messages.
Set to [AF + A] to capture the image after
15 [Exit] button
autofocusing when the Live View image is clicked.
Exits the IMAGE Transmitter 2.
20 LV zoom button
16 [Camera OFF] button
Sets the camera to the Auto Power Off state. The
Zooms in centered on the position of the AF frame.
button flashes during the Auto Power Off state.
Click the button again to return to 1× image display.
21 Remote REC View
To reactivate the camera, cancel the Auto Power
Off state on the camera.
Displays the last captured/transferred image.
17 Live View window
22 Minimize button
Closes the Live View window.
Click
5
to display the Live View window.
Clear the check boxes (S) of the file formats
How to Perform Shooting
corresponding to the [File Format] setting of the
1
Set the shooting functions on the camera.
2
Set the save destination in the IMAGE
camera that are not used for saving images to the
computer.
4
Transmitter 2.
To change the save destination, click
3
Click
.
.
Select or clear each of the [Save to Card]/
[File Format to Transfer] check boxes.
The camera monitor turns off after the message
[Remote Capture mode activated] appears on it.
The Live View image is displayed in the Live View
window.
6
5
6
Check the Live View image and adjust the
exposure as necessary.
Adjust the focus.
When the focus mode is set to v, click
Alternatively, click a position where you want to
perform autofocus in the Live View window.
When the focus mode is set to w, adjust the
focus by operating the camera.
7
.
7
Click
t Memo
or press the shutter release
• Images can be captured without displaying the Live
button on the camera.
View image in the IMAGE Transmitter 2. In this case,
the captured image is displayed in the Live View
window.
• When the camera is in M mode or when the drive
mode is set to [Continuous Shooting], click
to
start and stop shooting. Perform the shooting start
and stop operation with either the camera or the
IMAGE Transmitter 2. Shooting cannot be performed
by clicking the Live View window.
u Caution
The image is captured and saved to the specified
• When the Live View image is displayed in the IMAGE
destination.
Transmitter 2, the status screen and the Live View
image are not displayed on the camera. Also, other
settings than the exposure mode cannot be changed
from the camera. When you want to change the
camera settings, click
mode.
8
to exit the Live View
• The G SHIFT function is not available with the
• When any of the following modes is set, you cannot
IMAGE Transmitter 2.
perform shooting with the IMAGE Transmitter 2.
Camera Setting
• Shooting can be performed even while recording to a
IMAGE Transmitter 2
memory card is not possible (remaining image
Operation
storage capacity is “0”, no memory card is inserted,
Movie recording
Does not operate. Switch the
mode
camera to still capture mode.
Drive modes:
Unable to operate. Capture
(S). However, when the check boxes of all file
[Multi-exposure
images by operating the
formats are cleared (S) and recording to a memory
+Continuous],
camera. (Captured images are
etc.) or while the [Save to Card] check box is cleared
card is not possible, none of the images is saved.
• If the connection with the camera is lost during the
[Interval Shooting], saved according to the settings
[Interval
transfer of a captured image, the image is discarded.
of the IMAGE Transmitter 2.)
• When the camera is connected with an AV device via
Composite]
Drive mode:
Does not accept a remote
HDMI cable, the Live View image is not displayed in
[Remote Control]
control signal while the Live
the IMAGE Transmitter 2.
View image is displayed. Click
to exit the Live View
mode.
• Autofocus is performed in the center area of the Live
View window and not performed near the edges of
the window.
9
">
