DEUTSCH

ENGLISH

FRANÇAIS

NEDERLANDS

MCD 5145USB

LOCATION OF CONTROLS

ENGLISH

1) DUST COVER 17) CD DOOR

UP/DOWN 19)

7) POWER ON/STANDBY BUTTON

8)

STOP

/

BAND BUTTON

9) MEMORY BUTTON

23) DISC SKIP BUTTON

24) DISC 1, 2, 3 BUTTON

25) CD DOOR OPEN BUTTON

11) REPEAT/RANDOM BUTTON 27) MP3 FOLDER / PRE-UP BUTTON

12) SKIP / TUNING DOWN BUTTON

13) MP3 FOLDER/ PRE-DN BUTTON

14) USB/SD RECORDING BUTTON

29) DECK 2 CONTROL KEYS

CAUTION:

USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL.

IMPORTANT:

SINCE MOVEMENT OF THE CD MECHANISM AND THE SENSITIVE CIRCUITY MAY CAUSE INTERFERENCE TO

THE RADIO TUNER NEARBY, SWITCH THIS UNIT OFF WHILE OPERATING OTHER

RADIO DEVICES.

DUE TO THE COMPLEXITY OF MUC CONTROL, PLEASE UN-PLUG THE MAIN POWER SUPPLY OF

THE UNIT IF FOUND THE UNIT HANG UP DURING OPERATION!

THIS IS NOT A MALFUNCTION OF THE SYSTEM!

ENG 1

ENGLISH

PRECAUTIONS FOR USE

INSTALLATION

•

UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.

• DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAIN VOLTAGE AND BEFORE ALL

OTHER CONNECTIONS HAVE BEEN MADE.

• DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS

AROUND THE UNIT FOR VENTILATION.

CONNECTION

1. CONNECT THE POWER CORD (37) TO AC OUTLET.

2. WHEN YOU FIRST PLUG THE UNIT INTO THE MAINS, THE UNIT WILL GO INTO STANDBY MODE.

3. CONNECT THE SPEAKER WIRE TO THE SPEAKER TERMINAL (34) LOCATED ON THE REAR SIDE OF THE

UNIT.

4. TURN ON THE POWER (7) AND SELECT “CD“ FUNCTION BY PRESSING “ FUNCTION “ BUTTON (10) . IF THE

LCD DISPLAY (2) IS ON WITH BACKLIGHTING, IT MEANS THE POWER SUPPLY IS NORMAL. NOW THE

SYSTEM IS READY TO PLAY THE MUSIC.

SETTING THE CLOCK

1. SET UNIT IN STANDBY MODE.

2. PRESS THE “TIMER/CLK-ADJ” BUTTON (4), THE DISPLAY Will SHOW “ 12H “ OR “ 24H “, THEN PRESS THE

PRE-UP (27) OR PRE-DOWN (13) BUTTON TO SELECT THE APPROPIATED HOUR FORMAT (12 HOUR

OR 24 HOUR). PRESS THE “TIMER/CLK-ADJ” BUTTON (4) TO CONFIRM.

3. PRESS (13) BUTTON TO SET THE CORRECT HOUR.

4. PRESS THE SKIP DOWN

(12)

OR SKIP UP

(26)

BUTTON TO SET THE CORRECT MINUTES.

5. PRESS ”TIMER/CLK-ADJ” BUTTON (4)TO STORE THE CORRECT HOUR.

¾ THE PRE-SET TIME WILL BE RE-SET COMPLETELY IF DIS-CONNECTING THE MAIN POWER

SUPPLY. YOU ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY MODE FOR

CONVENIENCE USAGE.

LISTENING TO RADIO

MANUAL TUNING

1. PRESS FUNCTION BUTTON (10) TO SELECT “ TUNER “ MODE

2. PRESS “ STOP / BAND ” BUTTON (8) AND SELECT THE DESIRED BAND (MW (AM) OR FM).

3. TUNE TO THE REQUIRED STATION BY PRESSING THE “ SKIP / TUNING UP (26) OR DOWN (12)

BUTTON.

4. ADJUST VOLUME UP/DOWN CONTROLS (3) TO THE DESIRED VOLUME LEVEL.

AUTO TUNING

1. PRESS FUNCTION BUTTON (10) TO SELECT “ TUNER “ MODE

2. PRESS “ STOP / BAND ” BUTTON (8) AND SELECT THE DESIRED BAND (MW (AM) OR FM).

3. PRESS AND HOLD THE “ SKIP / TUNING UP (26) OR DOWN (12) BUTTON FOR 1-2 SECONDS AND

THEN RELEASE

4. THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP UNTIL A RADIO STATION IS REACHED.

5. REPEAT STEP 3 & 4 UNTIL THE DESIRED RADIO STATION IS BEING REACHED.

6. ADJUST VOLUME UP/DOWN CONTROLS (3) TO THE DESIRED VOLUME LEVEL.

PRESET STATIONS

YOU CAN STORE UP TO TOTAL OF 40 RADIO STATIONS (30 FM,10AM) IN THE MEMORY.

1. SET TO “ TUNER “ MODE

2. TURN TO THE DESIRED RADIO STATION BY “ MANUAL” OR “AUTO” TUNING METHOD.

3. PRESS “ MEMORY ” BUTTON (9) TO ENABLE PROGRAM STATE.

4. PRESS “ PRE-UP (27) OR PRE-DOWN (13) BUTTON TO SELECT THE DESIRED STATION MEMORY

FOR STORAGE.

5. PRESS “MEMORY ” BUTTON (9) AGAIN TO CONFIRM THE SETTING.

6. REPEAT STEP 2 TO 5 TO STORE OTHER STATIONS.

7. PRESS “ PRE-UP (27) OR PRE-DOWN (13) BUTTON TO SELECT THE PRESET STATIONS IN ORDER.

8. TO RETURN NORMAL TUNER MODE, LEAVE KEYS FREE.

¾ THE PRE-SET MEMORIES WILL BE CANCELLED COMPLETELY IF SWITCHING OFF THE MAIN POWER

BUTTON ON SYSTEM. YOU ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY MODE FOR

CONVENIENCE USAGE.

¾ THERE ARE 5 SECONDS FOR PROGRAM STATE, AFTER 5 SEC. THIS STATE WOULD RELEASE TO

NORMAL TUNER MODE AUTOMATICALLY.

¾ YOU CAN OVERWRITE A PRESENT STATION BY STORING ANOTHER FREQUENCY IN ITS PLACE.

ENG 2

ENGLISH

RADIO DATA SYSTEM (RDS)

THIS IS THE FEATURES TO DISPLAY THE INFROMATION WHICH RELEASED FROM THE RADIO BROADCASE:-

RDS MODE : PRESS AND HOLD TO ACTIVE THE RDS FUNCTION AND THE PROGRAM SERVICE STATION NAME

(PS) IS BEING DISPLAYED.

RDS SEARCH : PRESS TO SELECT THE PROGRAM TYPE YOU WANT TO LISTEN, THEN PRESS THE TUNING +/-

BUTTON TO START RDS SEARCHING AND THE UNIT CAN AUTOMATICALLY DETECT A SUITABLE STATION,

WHICH IS CURRENTLY BROADCASTING WITH PROGRAM TYPE IDENTIFICATION (PTY) SIGNAL.

REMARK : NO “ PS “ NOR “ PTY “ APPEARS IF NO SIGNAL IS SENT.

PROGRAMMES ARE CLASSIFIED AS FOLLOWS:

NEWS, AFFAIRS (current affairs), INFO (information), SPORT EDUCATE (education), DRAMA, CULTURE, SCIENCE,

VARIED, POP M (pop music), ROCK M (rock music), MOR M (middle of the road music), LIGHT M (light classical),

CLASSICS (serious classical), OTHER M (other music).

NOTES

PROGRAMME SERVICE STATION NAME (PS)

THIS IS A NAME CONSISTING OF LESS THAN 8 ALPHANUMERIC CHARACTERS, WHICH IS DISPLAYED IN

ORDER TO INFORM LISTENERS ABOUT THE PROGRAMME SERVICE BEING BROADCASTBY THE RADIO

STATION. EXAMPLE: BBC 1

PROGRAMME TYPE IDENTIFICATION (PTY)

PTY ALLOWS SELECTION BY ONE OF THE PROGRAMME TYPES RATHER THAN BY A STATION.

RADIO TEXT (TEXT)

INFORMATION SUCH AS THE CAST LIST OF A PLAY OR THE TITLE OF A SONG IS SHOWN ON THE DISPLAY.

CLOCK-TIMER (CT)

CT FUNCTION PROVIDES AN ACCURATE CLOCK SIGNAL.

IF THE CLOCK OF THE SYSTEM IS NOT ADJUSTED AFTER PLUG IN, WHEN A RDS CLOCK IS RECEIVED, THE

SYSTEM WILL AUTOMATICALLY UPDATE THE SYSTEM CLOCK TO THE RECEIVED RDS CLOCK TIME. THE

SYSTEM CLOCK IS NOW ADJUSTED.

FM & FM-STEREO RECEPTION (BY REMOTE HANDSET)

z PRESS THE “ FM-ST/MONO ” BUTTON AT REMOTE HANDSET REPEATEDLY, THE FM PROGRAMS ARE

RECEIVING IN MONO AND STEREO MODE REPEATEDLY. IN PARTICULAR WHEN STEREO SIGNALS ARE

WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM IN MONO. z IF STEREO SIGNAL IS BEING RECEIVED, THE “ST” INDICATOR “

SHOW FM STEREO PROGRAM IS NOW RECEIVING.

” WILL APPEAR ON LCD (2) TO

HINTS FOR BEST RECEPTION:-

- AM : THE RECEIVER HAS A BUILD-IN AM BAR ANTENNA. IF AM RECEPTION IS WEAK, SLIGHT ROTATE OR

RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM RECEPTION.

- FM : CONNECT THE FM SOCKET (36) VIA A 75 OHM CABEL (NOT PROVIDED) FOR THE BEST RECEPTION.

PHONO

NOTED:

- REMOVE THE STYLUS PROTECTOR.

- BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE ARM

REST BEFORE OPERATING AND RE-SECURED AGAIN AFTERWARDS.

1. SELECT TO “ PHONO ” MODE FROM FUNCTION SELECTOR (10)

2. SET THE SPEED SELECTOR (32) TO THE PROPER POSITION DEPENDING ON THE TYPE OF RECORD TO

BE PLAYED.

3. PLACE THE RECORD ON THE PLATTER (USE THE SPINDLE ADAPTOR (31) IF

REQUIRED).

4. LIFT THE TONE ARM FROM THE REST (33) AND SLOWLY MOVE IT TO THE RECORD

SIDE. THE PLATTER WILL START TO ROTATE.

5. PLACE THE TONE ARM TO THE DESIRED POSITION OF THE RECORD.

6. ADJUST THE VOLUME UP/DOWN BUTTON (3) TO THE DESIRED LEVEL.

7. AT THE END OF RECORD, THE PLATTER WILL AUTOMATICALLY STOP ROTATING. LIFT

ENG 3

ENGLISH

THE TONE ARM FROM THE RECORD AND RETURN IT TO THE REST POSITION (33).

8. TO STOP MANUALLY, LIFT UP THE TONE ARM FROM THE RECORD AND RETURN IT TO THE REST (33).

REMARK : AS SOME KIND OF RECORD THE AUTO-STOP AREA WAS OUT OF THE UNIT SETTING, SO IT WILL

STOP BEFORE THE LAST TRACK FINISH. IN THIS CASE, SELECT THE AUTO-STOP SWITCH (35) TO “ OFF

“ POSITION, THEN IT WILL RUN TO THE END OF THE RECORD BUT WILL NOT STOP AUTOMATICALLY (TURN

OFF THE UNIT BY POWER BUTTON OR SWITCH BACK THE AUTO-STOP SWITCH (35) TO “ ON “ POSITION TO

STOP THE PLATTER ROTATE). THEN PUT BACK THE TONE ARM TO THE REST POSITION (33).

PLAYING COMPACT DISC

z GETTING START

1. SELECT “ CD ” MODE FROM FUNCTION SELECTOR (10)

2. PRESS “OPEN/CLOSE” BUTTON (25) TO OPEN THE CD DOOR.

3. PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY.

4. PRESS THE “ “ BUTTON (23) TO TURNING THE CD TRAY, AND LOADING OUT THE OTHER DISC

COMPARMENT.

5. PRESS THE “OPEN/CLOSE” BUTTON (25) TO CLOSE THE CD DOOR AFTER PLACING ALL DISCS INSIDE.

6. CD SEARCH IS PERFORMING, THE LCD DISPLY (2) WILL SHOW THE TOTAL NUMBER OF DISC, NUMBER OF

TRACKS & PLAYING TIME OF DISC.

NOTED : CD SEARCHING WILL BE PERFORMAED EVERYTIME WHEN SWITCHING TO CD MODE OR CLOSING

THE CD DOOR. ALL CD FUNCTIONS WILL BE RESPONSED ONLY AFTER THE CD READING IS COMPLETED.

z PLAY / PAUSE MODE

1. SYSTEM WILL START PLAYBCK AUTOMATICALLY OR PRESS THE “ PLAY/PAUSE ” BUTTON (22) TO

START PLAYBACK, THE FIRST TRACK OF THE FIRST DISC WILL BE PLAYED AND THE PLAYBACK

INFORMATION WILL APPEAR ON THE LCD DISPLAY (2).

2. OR PRESS EITHER THE “ DISC 1 ” , “ DISC 2 ” , “ DISC 3 ” BUTTON (24), UNIT WILL PLAY THE DISC INSIDE

THE DESIRE TRAY DIRECTLY.

3. TO INTERRUPT, PRESS THE “ PLAY/PAUSE ” BUTTON (22) ONCE AND THE INFORMATION ON LCD

DISPLAY (2) WILL START FLASHING. PRESS AGAIN TO RELEASE & RESUME NORMAL PLAYBACK.

REMARK : THE CD TRAY WILL OPEN IF PRESS “ CD DOOR “ OPEN BUTTON (25) DURING PLAYABCK. THIS

ALLOW TO CHANGE/TAKE OUT THE OTHER TWO CDs WITHOUT INTERRUPT THE MUSIC PLAYBACK.

z STOP MODE

1. IF “ STOP / BAND ” BUTTON (8) IS PRESSED DURING PLAY OR PAUSE MODE, SYSTEM WILL GO TO

STOP MODE.

z SKIP MODE (SKIP UP /SKIP DOWN )

1. DURING PLAY OR PAUSE MODE, IF “ SKIP UP ” BUTTON (26) IS PRESSED IT WILL GO TO NEXT TRACK

AND DISPLAY THE TRACK NO. AND THEN REMAIN THE PLAY OR PAUSE MODE.

2. DURING PLAY OR PAUSE MODE, IF “ SKIP DOWN ” BUTTON (12) IS PRESSED. IT WILL GO BACK TO THE

BEGINNING OF THE TRACK, ORIGIANL TRACK NO. IS DISPLAY AND REMAIN THE PLAY OR PAUSE MODE.

3. AFTER STEP 2, PRESS “ SKIP DOWN ” BUTTON (12) AGAIN, IT WILL GO TO THE PREVIOUS TRACK

AND REMAIN THE PLAY OR PAUSE MODE.

z SEARCH MODE (SEARCH UP /SEARCH DOWN )

1. DURING PLAY MODE, IF “ SKIP UP ” BUTTON (26) IS PRESSED & HOLD FOR FEW SECONDS, IT WILL

START SEARCHING FORWARD.

2. DURING PLAY MODE, IF “ SKIP DOWN ” BUTTON (12) IS PRESSED & HOLD FOR FEW SECONDS. IT

WILL STAR SEARCHING BACKWARDS.

z FOR MP3 DISC

1. AFTER FOCUS SEARCH IS PERFORMING, THE TOTAL NUMBER OF TRACK AND FOLDER WILL BE SHOWN

ON THE LCD DISPLAY (2).

2. PRESS “ PRE-UP “ (27) OR “PRE-DOWN “ (13) BUTTON TO SELECT THE FOLDER NUMBER.

3. PRESS “ SKIP UP “ (26) OR SKIP DOWN (12) BUTTON TO SELECT THE TRACK NUMBER.

4. WHEN THE DESIRED TRACK AND FOLDER IS BEING SELECTED, PRESS THE “ PLAY/PAUSE ”

BUTTON (22) TO START PLAYBACK.

ENG 4

ENGLISH

ID3 (TRACK TITLE/ALBUM/ARTIST) FUNCTION (BY REMOTE HANDSET)

PRESS THE “ DISPLAY “ BUTTON REPEATLY DURING PLAYBACK OF MP3/WMA DISC, THE SONG TITLE / ALBUM

NAME / ARTIST NAME IS BEING DISPLAYED IN ORDER. THE LCD DISPLAY (2) WILL RESUME TO NORMAL

PLAYBACK INFORMATION IF LEAVE KEY FREE.

REMARK:-

- IN THAT CASE OF NO NAME HAD BEEN ASSIGNED FOR THE TRACK, “ NO TITLE “ OR “ NO ALBUM “ OR “ NO

ARTIST “IS BEING DISPLAYED” ON DISPLAY (2).

- NO TITLE/ALBUM NAME CAN BE RECOGNIZED IF THE INPUT FORMAT ON THE DISC/MEMORY CARD IS

NOT SUPPORTING BY THE SYSTEM

- THE SYSTEM SUPPORT ONLY ENGLISH AND ARABIC NUMBER FOR ID3 FUNCTION

MP3 TRACK FORMAT REQUIREMENT:-

-

BIT RATE : 32 KBPS~320KBPS, SAMPLING RATE : 32KHZ, 44.1KHZ AND 48 KHZ DECODABLE

- THE PERFORMANCE OF PLAYING MP3 DISC IS VARIOUS FROM THE QUALITY OF RECORDING DISC AND

THE METHOD OF RECORDING. FURTHERMORE, THE SEARCHING LEAD-TIME FOR MP3-CD IS LONGER

THAN NORMAL CD DUE TO DIFFERENCE FORMAT.

z REPEAT/RANDOM MODE

PRESS THE REPEAT/RANDOM BUTTON BEFORE OR DURING PLAYBACK, A SINGLE TRACK, SINGLE DISC OR

ALL THE TRACKS CAN BE PLAYED IN DIFFERENCE MODE AS FOLLOW:-

FOR CD/MP3 DISC

(4) RANDOM PLAY (1 DISC) (3) RANDOM + REPEAT (1 DISC)

(5) OFF MODE (1) REPEAT (1 TRACK)

INDICATOR

MODE ON DISPLAY

REPEAT (1 TRACK)

(2) REPEAT (1 DISC)

REPEAT (1 DISC) ALL

REPEAT (1 DISC) + RANDOM RAN +

RANDOM (1 DISC) RAN

ALL

z REPEAT PLAY

YOU CAN LISTEN THE DESIRED TRACKS OR FOLDER REPEATEDLY BY THIS FUNCTION.

z RANDOM PLAY

YOU CAN LISTEN ALL THE TRACKS OR FOLDER IN A RANDOM ORDER BY THIS FUNCTION

CD/MP3 DISC PROGRAMMING

UP TO 40 TACKS CAN BE PROGRAMMED FOR DISC PLAY IN ANY ORDER. BEFORE USE, BE SURE TO PRESS

THE“ STOP / BAND ” BUTTON (8)

1. SET IN CD MODE & STOP THE CD PLAYBACK.

2. PRESS THE “ MEMORY BUTTON (9) , “ MEM “ WILL APPEAR ON LCD DISPLAY (2) & FLASHING. MOREOVER,

IT WILL INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED.

3. SELECT A DESIRED TRACK BY PRESSING SKIP UP OR DOWN BUTTONS (26,12).

(FOR MP3 DISC, PRESS“ PRE-UP “ (27) OR “PRE-DOWN “ (13) BUTTON TO SELECT THE DESIRE

FOLDER)

4. PRESS THE “ MEMORY ” BUTTON (9) TO STORE THE TRACE INTO MEMORY.

5. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.

6. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS “ PLAY/PAUSE ” BUTTON (22)

TO PLAY THE DISC IN ASSIGNED ORDER.

7. PRESS “ STOP / BAND ” BUTTON (8) TO TERMINATE PROGRAM PLAY. PRESS AGAIN “ STOP /

BAND ” BUTTON (8) TO CLEAR ALL MEMORY & THE INDICATOR “ MEM “ DISAPPEAR FROM LCD DISPLAY (2)

¾ AFTER PROGRAM COMPLETE, PRESS “ SKIP UP

OR DOWN BUTTONS (26,12) TO REVIEW THE

TRACKS BEING PROGRAMMED. PRESS “ CD STOP “ BUTTON (20) TO EXIT REVIEW MODE.

¾ THE PROGRAMMING FUNCTION ALLOW TO PROGRM 1 ENTIRE DISC ONLY.

ENG 5

ENGLISH

PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY CARD

CONNECTING

THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 FILE WHICH STORED IN THE MEMORY MEDIA

WITH USB CONNECTING PORT, MULTI- MEDIA CARD (MMC) OR SECURE DIGITAL (SD) MEMORY CARD.

1. PRESS FUNCTION BUTTON (10) REPEATEDLY TO SELECT “ USB ” OR

“ SD CARD “ MODE.

2. PLUG-IN THE USB PEN-DRIVE WITH THE FACE UP & MAKE SURE IT

GOING INTO COMPLETELY OR INSERT THE MEMORY CARD IN THE

DIRECTION OF THE SYMBOL WHICH NEXT TO THE SD CARD SLOT.

INSERT STRAIGHT WITHOUT BENDING. z

CONNECTING THE USB / MEMORY CARD UPSIDE DOWN OR

BACKWARDS COULD DAMAGE THE AUDIO SYSTEM OR THE

STORAGE MEDIA (USB / MEMORY CARD). CHECK TO BE SURE THE

DIRECTION IS CORRECT BEFORE CONNECTION.

3. THE SYSTEM WILL START READING THE STORAGE MEDIA AUTOMATICALLY AFTER CONNECTING, AND

LCD DISPLAY (2) WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES AND TOTAL NUMBER OF ALBUM

BEING DETECTED.

4. REPEAT THE SAME PLAYBACK PROCEDURE AS PLAYING CD/MP3 DISC AS ABOVE

REMARK

- THE SYSTEM CAN DETECT AND READ THE FILE UNDER MP3 AND WMA FORMAT ONLY THOUGH THE USB

PORT/MEMORY CARD SLOT.

- IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN MP3

ENCODING FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB SOCKET. THIS IS

NOT THE MALFUNCTION OF THE SYSTEM.

- USB PORT DOES NOT SUPPORT CONNECTION WITH USB EXTENSION CABLE AND IS NOT DESIGNED

FOR COMMUNICATION WITH COMPUTER DIRECTLY.

ENCODING OF CD FILE INTO MP3 FILE

THE SYSTEM IS ABLE TO ENCODE NORMAL CD/PHONE/TAPE TO MP3 FORMAT AND RECORDING AT MEMORY

MEDIA WITH USB CONNECTING PORT, MULTI- MEDIA CARD (MMC) OR SECURE DIGITAL (SD) MEMORY CARD.

A) CD ENCODING

I) ECNODING 1 TRACK

1. PERFORM NORMAL PLAYBACK OF THE CD TRACK YOU WANT TO ENCODE & RECORD,

“ OR “ CARD “ & FLASHING. (IF BOTH SORUCE ARE READY DURING RECRODING). THEN PRESS “ SKIP

UP

”

OR “ DOWN “ BUTTONS (26,12) TO SELECT AND THEN PRESS “ REC “ BUTTON (14) TO

CONFIRM.

3. THE SYSTEM WILL SHOW “USB” OR “CARD” & “ “ AND FLASHING. ENCODING IS PERFORMING NOW.

4. PRESS “ STOP / BAND ” BUTTON (8) TO TERMINATE THE RECROIDNG.

II) ENCODING 1 ENTIRE DISC

1) REPEAT THE SAME PROCEDURES (1) TO (3) AS SIPULATED ABOVE UNTIL THE SYSTEM STARTING

ENCODING OF 1 TRACK.

2) THEN PRESS AGAIN THE “ REC “ BUTTON (14) ONE MORE TIME AND “ REC ALL “ WILL SHOW ONCE ON

LCD DISPLAY (2)

3) AFTER COMPLETING OF ENCODING OF TH ENTIRE DISC, UNIT WILL STOP PLAYBACK AUTOMATICALLY.

REMARK:-

- THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE CD TRACK

- THE SYSTEM WILL CREAT A “ AUDIO “ FOLDER AND THEN STORE THE ENCODING TRACK IN IT.

- THE RECORDING FORMAT IS PRESET AT – MP3

BIT RATE : 128 KBPS, SAMPLING RATE : 44.1KHZ

- NO SONG TITLE/ALABUM NAME/ARTIS NAME WILL BE RECORDED DURING ENCODING MODE

- TO INTERRUPT THE RECRODING, PRESS THE “ STOP / BAND ” BUTTON (8) DURING RECORD MODE.

- ALWAYS INSERT EITHER ONE TYPE OF MEMORY MEDIA “ USB PEN-DRIVE “ OR “SD/MMC CARD “ FOR

ENCODING.

- RECORDING WILL BE COMPLETED ONLY ENTIRE SONG BEING ENCODED, IF TERMINATE THE

ENCODING PROCESS INTERMEDIATELY, THERE IS NO TRACK BEING RECORDED NOR STORED TO THE

USB OR SD/MMC CARD

III) COPYING OF MP3/WMA FILE

IF PUTTING A MP3/WMA DISC INSTEAD OF A CD-DISC, THE SYSTEM WILL COPY THE FILES TO THE USB OR

SD/MMC CARD IF PRESS THE “ REC “ BUTTON (14). THE OPERATION PROCEDURES IS SAME AS CD

ENCODING AS STIPULATE ON ABOVE, AND THE SYSTEM WILL SWITCH TO COPYING MODE ONLY IF MP3/WMA

FILE BEING READ.

ENG 6

ENGLISH

REMARK:

- THE SYSTEM WILL CREAT A “ FCOPY “ FOLDER AND THEN STORE ALL COPIED TRACK IN IT.

- IF PRESS THE “ REC “ BUTTON (14) DURING PLAYBACK OF USB OR SD SOURCE, THE FILE WILL COPY

FROM USB TO SD OR SD TO USB.

- COPYING WILL BE COMPLETED ONLY ENTIRE SONG BEING COPY, IF TERMINATE THE COPY PROCESS

INTERMEDIATELY, THERE IS NO TRACK BEING RECORDED NOR STORED TO THE USB OR SD/MMC

CARD

B) CASSETE ENCODING

1) SELECT TO “ TAPE ” MODE FROM FUNCTION SELECTOR (10) AND THEN PRESS THE “ REC “ BUTTON

(14) DIRECTLY.

2) THE LCD DISPLAY (2) WITH SHOW THE WORD “ USB “ OR “ CARD “ AND “ “ & FLASHING, NOW THE

SYSTEM IS STARTING THE ENCODING MODE.

3) START PLAYBACK OF THE CASSETTE TAPE WHICH THE TRACK YOU PREPARE TO RECORD.

4) AFTER FINISH OF RECODING, PRESS THE “ STOP / BAND ” BUTTON (8) UNTIL THE TEXT ON LCD (2)

STOP FLASHING AND RETURN TO “ TAPE “ MODE.

C) PHONO ENCODING

1) PRESS THE FUNCTION BUTTON (14) TO “ PHONO “ MODE AND THEN PRESS THE “ REC “ BUTTON (25)

DIRECTLY.

2) THE LCD DISPLAY WITH SHOW THE WORD “

USB

“ OR “ SD “ AND THEN FLASHING, AND THEN DISPLAY

“ “ & “ “ AND FLASHING AFTER FEW SECONDS. NOW THE SYSTEM IS STARTING THE

ENCODING MODE.

3) START PLAYBACK AT PHONO FOR THE TRACK WHICH YOU WANT TO RECORDING..

4) AFTER FINISH OF RECODING, PRESS THE : CD STOP “ BUTTON (20) UNTIL THE LCD STOP FLASHING AND

RETURN TO “ PHONO “ MODE.

TRACK SEPARATION (BY REMOTE HANDSET)

YOU CAN DIVIDE THE RECORDING MUSIC FROM PHONO OR TAPE TO USB/SD TRACK BY TRACE DURING

ENCODING. EVERY TIME WHEN PRESS THE “ “ (TRACK SEPARATION) BUTTON ONCE AT REMOTE

HANDSET DURING ENCODING FROM PHONO OR TAPE TO USB/SD, THE SYSTEM WILL GENERATE A NEW

TRACK AND CONTINUOUS THE RECRODING. THE TEXT “ PHONO “ OR “ TAPE “ AT LCD DISPLAY (2) WILL

FLASHING ONE TIME, IT MEAN THE UNIT IS CREATING A NEW TRACK SUCCESSFULLY.

FILE DELETE AT USB / SD CARD (BY REMOTE CONTROL)

THE SYSTEM IS ABLE TO ERASE THE FILE STORED INSIDE THE USB PEN DRIVE OR SD CARD BY

FOLLOWING:-

SINGLE FILE DELETE (BY REMOTE CONTROL)

1 PRESS “ DELETE “ BUTTON ON REMOTE AND THE LCD DISPLAY (2) WILL SHOW (DELETE TRACK---001)

2 PRESS “ SKIP UP

”

OR “ DOWN “ BUTTONS (26,12) TO SELECT THE FILE GOING TO DELETE

3 PRESS THE “ DELETE “ BUTTON AGAIN TO CONFIRM THE DELECTION..

REMARK : PRESS “ STOP / BAND ” BUTTON (8) TO EXIT DELETE MODE ANYTIME

REMOVING OF USB / MEMORY CARD

TO REMOVE THE USB / MEMORY CARD, TURN OFF THE POWER OR SWITCH THE FUNCTION MODE TO EITHER

CD, AUX OR TUNER FIRST. FOR USB PORT – UN-PLUG IT BY PULLING OUT THE USB SOCKET DIRECTLY, FOR

MEMORY CARD – PRESS THE MEMORY CARD INWARD & THEN RELEASE, NOW THE CARD BEING PARTIALLY

EJECT AND YOU CAN REMOVE IT BY HAND.

LISTING TO TAPE

GENERAL OPERATION

STOP / EJECT KEY PRESS TO STOP ALL DECK OPERATION. PRESS AGAIN TO OPEN THE CASSETTE

DOOR.

FAST FORWARD KEY &

FAST REWIND KEY

PRESS TO START RAPID TAPE WINDING IN EITHER FORWARD OR REVERS

DIRECTION. PRESS STOP / FAST REWIND KEY EJECT KEYS WHEN THE CASSETTE

SPOOLS STOP TURNING.

PAUSE KEY PRESS TO STOP TAPE OPERATION TEMPORARILY. PRESS AGAIN TO RESUME

PLAY.

ENG 7

RECORD KEY

ENGLISH

PRESS TOGETHER WITH PLAY KEY TO START TAPE RECORDING.

(DECK 1 ONLY)

PLAYBACK

z SELECT “ TAPE ” MODE FROM FUNCTION SELECTOR (10) z PUT IN THE CASSETTE TAPE. z PRESS z ADJUST THE VOLUME UP/DOWN CONTROL (3) TO THE DESIRED LEVEL. z USE PAUSE KEY

WHEN YOU WANT TO STOP PLAYBACK TEMPORARILY. z PRESS STOP / EJECT KEY WHEN FINISHED.

RECORDING

A. RECORDING FROM TAPE (DECK 2 TO DECK 1)

THIS UNIT ENABLES YOU TO DUPLICATE A PRE-RECORDED TAPE TO ANOTHER TAPE. IT IS PERFORMED

ONLY ONE WAY FROM DECK 2 (PLAYBAK) TO DECK 1 (RECORDING).

DUBBING AT NORMAL SPEED

z

SELECT “ TAPE ” MODE FROM FUNCTION SELECTOR (10) AND THEN SET THE DUBBING BUTTON (6) AT

“ NOR. “ POSITION z INSET A PRE-RECORDED CASSETTE INTO DECK 2 AND A BLANK CASSETTE TAPE INTO DECK 1. z PRESS THE “ PAUSE ” KEY AND THEN PRESS THE “ RECORD ” AND “ PLAY ” KEY AT DECK 1. z PRESS THE “ PLAY

” KEY TO START PLAYBACK AT DECK 2 & THEN RELEASE “ PAUSE ” KEY AT DECK

1 TO START DUBBING. z PRESS “ PAUSE

” KEY AT DECK 1 & “ STOP ” KEY AT DECK 2 WHEN FINISH.

DUBBING AT HIGH SPEED

THIS UNIT IS QUIPPED WITH A HIGH SPEED DUBBING SYSTEM WHICH CAN SAVE THE TIME FOR DUBBING BY

2/3 WHEN COMPARE TO NORMAL SPEED. z PRESS THE DUBBING BUTTON (6) TO “ HI

“ POSITION AND THEN FOLLOW THE SAME PROCEDURES

AS STIPULATED IN “DUBBING AT NORMAL SPEED”. z WHEN DUBBING A PRE-RECORDED CASSETTE TAPE AT HIGH SPEED, A CHATTERING SOUND IS BEING

HEARD. TO AVOID THIS, SET THE VOLUME CONTROL TO A MINIMUM LEVEL. z DO NO PRESS O SELECT THE “ DUBBING ” BUTTON (6) TO HI OR NOR. POSITION DURING DUBBING, THIS

WILL VARY THE SPEED OF RECORDING AND MAY BE DAMAGE THE CASSETTE TAPE.

B. RECORDING FROM RADIO z SELECT “ TUNER ” MODE FROM FUNCTION SELECTOR (10) z TUNE TO THE DESIRED STATION AND INSERT A BLANK CASSETTE TAPE IN DECK 1. z PRESS “ RECORD ” & “PLAY “ KEY TO START RECORDING. z PRESS “ PAUSE ” KEYS AND THEN “ STOP/EJECT ” KEY WHEN FINISH.

¾ DURING RECORDING OF AM, BEATING WHISTLE AT SOME RECEPTION STATIONS MAY HAPPEN, THIS IS

NORMAL PHENOMEMON.

C. RECORDING FROM CD/USB/SD z SELECT “ CD/USB/SD ” MODE FROM FUNCTION SELECTOR (10). z INSERT A BLACK CASSETTE TAPE IN DECK 1 WHICH SUITABLE FOR RECORDING. z PRESS “ PAUSE ” KEY FIRST AND THEN “RECORD ” & “ PLAY “ KEY AT CASSETTE. RECORDING

FUNCTION IS NOW ON STAND BY. z START PLAYBACK OF EITHER CD/USB/SD MODE, AND THEN PRESS “PAUSE KEY ” AT CASSETTE TO

START RECORDING. z TO STOP RECORDING, PRESS “ STOP / BAND ” BUTTON (8) ON CD/USB/SD MODE FIRST, THEN PRESS

THE “ PAUSE ” KEY AND THEN “STOP/EJECT ” KEY ON CASSETTE TAPE DECK.

D. RECORDING FROM TURNTABLE z SELECT “ PHONO ” MODE FROM FUNCTION SELECTOR (10). z INSERT A BLANK CASSETTE TAPE IN DECK 1. z

PRESS “RECORD ” & “ PLAY “ KEY TO START RECORDING. z SELECT THE DESIRE RECORD AND START PLAYBACK z

PRESS “ PAUSE ” KEYS AND THEN “ STOP/EJECT ” KEY WHEN FINISH.

MORE FEATURES

A. SLEEP SETTING (BY REMOTE CONTROL)

THE SLEEP FUNCTION ENABLES THE SYSTEM SWITCH TO STANDBY MODE AUTOMATICALLY AT A

PRESENT TIME.

1. PRESS “SLEEP/TIMER” BUTTON AND SLEEP INDICATOR “ Z Z

Z

” SHOWN ON THE LCD DISPLAY (2).

2. KEEP PRESSING THE BUTTON TO ADJUST THE SLEEP TIMER IN THE ORDER OF SLP 90 > 75 >60 > 45 > 30

> 15 MINUTES.

3. SYSTEM WILL STOP AND GOTO STANDBY MODE AUTOMATICALLY AFTER THE SELECTED TIMING.

ENG 8

ENGLISH

4. TO CANCEL THE SLEEP MODE, PRESS “TIMER/SLEEP” BUTTON UNTIL “ OFF ” IS DISPLAY ON LCD (2) & THE

“ Z Z

Z

” INDICATOR DISAPPEAR.

B. ALARM CLOCK SETTING

THIS FUNCTION ALLOWS THE SYSTEM TO TURN ON AUTOMATICALLY AND WAKE YOU UP BY MODE OF CD,

TUNER, OR USB/SD.

SET THE SYSTEM AT STANDBY MODE, THEN PRESS AND HOLD THE “ TIMER/CLK-ADJ ” BUTTON (3)TO ENTER

THE PROGREM MODE:-

1) WAKE UP MODE : PRESS THE SKIP DOWN

(12)

OR SKIP UP

(26)

BUTTON TO SELECT CD/USB/SD

OR TUNER MODE RESPECTIVELY, BUT MAKE SURE THE MUSIC SOURCE HAS BEEN

PREPARED (CD – LOAD WITH DISC / TUNER – TURN TO THE DESIRED RADIO STATION /

USB/SD – CONNECT A USB MASS STORAGE DEVICE OR SD/MMC CARD WITH MUSIC

FILE INSIDE)

2) PRESS “TIMER/CLK-ADJ” BUTTON (3) TO CONFIRM THE SELECTED WAKE UP MODE!

3) WAKE UP TIME: PRESS PRE-UP (27) OR PRE-DOWN (13) BUTTON TO SET THE CORRECT HOUR.

AND SKIP DOWN

(12)

OR SKIP UP

(26)

BUTTON TO SET THE CORRECT

MINUTES

4) PRESS “ TIMER/CLK-ADJ “ BUTTON (3)TO STORE THE SETTING AND THE SYSTEM WILL

START PLAYING WHEN REACH THE PRESET TIME.

REMARK

5) IF THERE IS NO DISC INSIDE THE SELECTED CD TRAY, THE SYSTEM WILL SELECT THE NEXT

AVAILABLE DISC.

6) IF THERE IS NO MUSIC SOURCE BEING DETECTED WHEN THE PRESET TIME IS REACHED, SYSTEM

WILL SELECT TUNER MODE AUTOMATICALLY.

z ACTIVE/DE-ACTIVE TIMER FUNCTION (BY REMOTE CONTROL)

1. TO ACTIVE TIMER FUNCTION, PRESS THE “SLEEP/TIMER” BUTTON ON REMOTE HANDSET UNTIL THE

TIMER INDICATOR “ ” IS APPEAR ON LCD DISPLAY (2).

2. TO CANCEL TIMER FUNCTION, PRESS AGAIN “SLEEP/TIMER” BUTTON UNTIL THE TIMER INDICATOR

“ ” DISAPPEAR.

C. PRE-SET EQ FUNCTION

THIS UNIT PROVIDES 5 DIFFERENCES SOUND MODE TO ENHANCE YOUR LISTENING EXPERIENCE. YOU CAN

SELECT THE DESIRED EFFECT BY PRESSING THE “ PRESET EQ” BUTTON (19) REPEATEDLY AT FOLLOWING

SEQUENCE:-

FLAT POP JAZZ ROCK CLASSIC

ENG 9

ENGLISH

REMOTE CONTROL TRANSMITTER

CONTROL FUNCTIONS

BATTERY INSTALLATION (BATTERY NOT PROVIDED)

THE INFRA-RED TRANSMITTER REQUIRE 2 PCS “ AAA “ BATTERY FOR OPERATION

BUTTON DESCRIPTION

CD/SD/USB

ON/STANDBY

PRESS TO SELECT FUNCTION OF CD/SD/USB RESPRECTIVELY

PRESS TO SWITCH SYSTEM ON OR GOES TO STANDBY MODE

TUNER/BAND PRESS TO SELECT RADIO FUNCTION AND AM/FM BAND SELECTION

NUMBER KEY (0 - 9)

PRE-DN

PRESS TO SELECT THE NUMBER OF CD/USB/SD TRACK DIRECTLY

IN MP3/USB/SD MODE : PRESS TO SKIP DOWN THE FOLDER

IN TUNER MODE : PRESS TO CALL OUT THE PRESET MEMORY IN ORDER

CLOCK/TIMER MODE : PRESS TO SELECT HOUR GOES DOWN

PRE-UP IN MP3/USB/SD MODE : PRESS TO SKIP UP THE FOLDER

IN TUNER MODE : PRESS TO CALL OUT THE PRESET MEMORY IN ORDER

CLOCK/TIMER MODE : PRESS TO SELECT HOUR GOES UP

VOLUME -/+

PLAY/PAUSE

CONTROL VOLUME UP OR DOWN

IN CD MODE, PRESS ONCE TO START PLAYBACK. PRESS ONCE AGAIN TO

STOP THE DISC PLAY TEMPORARILY

STOP TERMINATE

ENG 10

ENGLISH

SKIP UP/DOWN

OPEN/CLOSE

ENTER / REC

FM-ST/MOMO / DELETE

IN CD MODE : TO SELECT PREVIOUS / NEXT CD TRACK

IN TUNER MODE : PRESS TO STEP UP/DOWN OF FREQUENCY

IN CLOCK/TIMER MODE : PRESS TO SELECT MINUTES GOES UP OR DOWN

IN CD MODE : PRESS TO OPEN OR CLOSE THE CD DOOR TRAY

PRESS TO ACTIVE CD ENCODING/MP3 FILE COPY FUNCTION OR CONFIRM

FILE DELETE SELECTION

IN TUNER MODE : PRESS TO SELECT FM STEREO OR FM MONO MODE

IN USB/SD MODE : PRESS TO ACTIVE FILE DELETE FUNCTION

TIMER / CLK-ADJ IN STANDBY MODE : PRESS TO ADJUST CLOCK

PRESS TO SET THE ALARM ON TIME AND ACTIVE/DE-ACTIVE ALARM

FUNCTION

DISC SKIP/RDS MODE

REP/RAN / RDS SRC

IN CD MODE : PRESS TO SELECT DISC 1,2,3 RESPECTIVELY

IN TUNER MODE : PRESS TO SELECT RDS MODE & INFOMRATION ON LCD

IN CD MODE : PRESS TO ACTIVE REPEAT / RANDOM FUNCTION

IN TUNER MODE : PRESS TO SELECT THE RDS PROGRAM TYPE FOR

SEARCHING

EQ

DISPLAY /

PRESS TO SELECT DIFFERENCE EQ MODE FOR ENJOYMENT

PLAYBACK MODE : PRESS TO DISPLAY DIFFERENCE INFORMATION OF THE

(TRACK SEPARATION) SYSTEM

PHONE/TAPE ENCODING MODE : PRESS TO DIVIDE THE RECORDING

TRACK AT TURNTABLE ONE BY ONE DURING ENCODING

SLEEP / TIMER PLAY MODE : PRESS TO ACTIVE SLEEP FUNCTION DURING MUSIC PLAY

STANBY MODE : PRESS TO ACTIVE OR DEACTIVE THE ALARM WAKE UP

FUNCTION AND ENTER TIMER MODE FOR SETTING

SPECIFICATIONS

FM FREQUENCY

AM FREQUENCA

BATTERY REMOTE

87,5 – 108 MHz

522 – 1620 KHz

POWER SUPPLY AC 230V ~ 50Hz

POWER CONSUMPTION 36W (WORKING)

3V 2x UM-4/AAA 1.5V

Copyright by Woerlein GmbH, 90556 Cadolzburg, www.woerlein.com

ENG 11