advertisement
▼
Scroll to page 2
of 37
WL-700G-M 802.11G Wireless USB Adapter User Guide -1- WL-700G-M 802.11G Wireless USB Adapter User Guide Table of Content Chapter 1 Introduction .......................................................... 1 1.1 1.2 1.3 1.4 Product Feature ......................................................... 1 Product Deployment ................................................ 2 Indicator Description ............................................... 3 Package Contents ..................................................... 4 Chapter 2 Installation Guide................................................ 5 Chapter 3 Client Utility Interface ..................................... 10 3.1 Station Mode............................................................. 11 3.1.1 Station Mode Topology ................................. 11 3.1.2 Status ................................................................. 12 3.1.3 Site Survey ....................................................... 13 3.1.4 Profile Management....................................... 15 3.1.5 Statistics ............................................................ 18 3.1.6 WPS Setting...................................................... 18 3.2 AP Mode...................................................................... 20 3.2.1 AP Mode Topology .......................................... 20 3.2.2 Basic Setting .................................................... 21 3.2.3 Security Setting .............................................. 22 3.2.4 Access Control ................................................. 23 3.2.5 About................................................................... 26 Appendix One: Acronyms and Terms ............................. 27 Appendix Two: Product Specification.............................. 30 Appendix Three: How to connect with PSP .................. 31 -1- WL-700G-M 802.11G Wireless USB Adapter User Guide Chapter 1 Introduction WL-700G-M Wireless USB Adapter complies with IEEE802.11b, IEEE 802.11g standards with up to 54Mbps transmission rate. Soft AP can help you establish wireless LAN networking with lowest cost. Besides, PBC and PIN encryption methods from WPS (Wi-Fi Protected Setup) can free you from remembering long passwords. Moreover, complete WMM support makes your voice and video more smooth. Especially supporting PSP, NDS and WII connections with Xlink Kai will be your best choice to enjoy on-line games. 1.1 Product Feature • Supports IEEE802.11g and IEEE802.11b standards • Provides USB2.0 port • Provides two work modes: Infrastructure Mode and Ad-Hoc Mode 1 WL-700G-M 802.11G Wireless USB Adapter User Guide • Provides up to 54Mbps maximum transmission rate • Auto-detects and changes the network transmission rate • Supports Soft AP to establish your wireless LAN networking • supports PSP, WII and NDS connecting with Internet and Xlink Kai to enjoy on-line gaming • Supports 64/128-bit WEP, WPA, WPA2 encryption methods • Supports WPS (Wi-Fi Protected Setup) encryption method to secure your networking strongly • Supports WMM to make your voice and video more smooth • 1.2 Easy-to-install, plug and play Product Deployment WL-700G-M Wireless USB Adapter offers fast, reliable and cost- effective solution for 2 WL-700G-M 802.11G Wireless USB Adapter User Guide wireless access. Deployment as follows; • For staff who requires higher mobility in the office, they want to have access to traditional wired or wireless network in any place of the company; • Enterprise or individual who requires often changes in lay out of network cables; • Companies or places which are not suitable for LAN cable laying out because of budget or objective building, including places of great interests, rent places or places for short-term usage; • Company or individual who avoids using expensive cables, renting cables or renting rights for access. 1.3 Indicator Description In the front panel of WL-700G-M, there is a LED 3 WL-700G-M 802.11G Wireless USB Adapter User Guide indicator blinking when data communication is going on. 1.4 Package Contents Unpack the packets, and please find the following items: One WL-700G-M Wireless USB Adapter One CD-ROM 4 WL-700G-M 802.11G Wireless USB Adapter User Guide Chapter 2 Installation Guide This chapter is to assist you how to use the included CD-ROM which comprises the Setup Wizard and the Client Utility Interface. The following steps on Setup Wizard are taken the Windows XP as example. 1. Please insert the Wireless USB Adapter into the USB port of your computer. 2. “Found New Hardware” system dialogue appears, and selects “Cancel” to use the included Setup Wizard for fast installation; of course, you also can select “Next” to install by manual. 5 WL-700G-M 802.11G Wireless USB Adapter User Guide 3. Inert the included CD-ROM into the CD-ROM drive of your computer, and the Welcome screen appears. (If not appear, “Setup.exe” icon.) 4. Click “Enter or Next”. 6 double click the WL-700G-M 802.11G Wireless USB Adapter User Guide 5. Click “Next” to start installing. 6. Click “Change…” to select the directory path, or 7 WL-700G-M 802.11G Wireless USB Adapter User Guide click “Next”. 7. Select “OK” and “Next” in the following window. 8 WL-700G-M 802.11G Wireless USB Adapter User Guide 8. During the installation, the following dialogue maybe appears. Click the “Continue Anyway” to continue. There is no security threat to your computer. 9. Click “Finish” to complete the installation. 9 WL-700G-M 802.11G Wireless USB Adapter User Guide Chapter 3 Client Utility Interface This software is for the WL-700G-M Wireless USB Adapter management. If it does not appear, select “Start”—“All Programs” —“Wireless Adapter”—“ 54m Wireless USB Adapter WL-700G-M”, or click the shortcut on your PC’s desktop. Note: In the Windows XP, you can select the included WL-700G-M Client Utility Interface or the Windows XP internal wireless application to configure the device. There are two client utility applications in WL-700G-M: Station mode and AP mode. Note: In this utility interface, Station Mode (Client Mode) is the default access way. 10 WL-700G-M 802.11G Wireless USB Adapter User Guide 3.1 3.1.1 Station Mode Station Mode Topology In this mode, WL-700G-M serves as a client to receive the wireless signals to access the Internet. 11 WL-700G-M 802.11G Wireless USB Adapter User Guide 3.1.2 Status In the Network Status window, it displays something on wireless adapter and wireless network status, including SSID, Authentication type, Encryption Type, IP address, subnet mask and gateway and so on. 12 WL-700G-M 802.11G Wireless USB Adapter User Guide 3.1.3 Site Survey The Site Survey is used to scan the available wireless network around, showing the wireless network’s signal strength and other information which provides basis for you to access which wireless network. Connect: select one entry in the wireless network list and click the button to connect the device with the selected network. Refresh: rescan the wireless network around. 13 WL-700G-M 802.11G Wireless USB Adapter User Guide 14 WL-700G-M 802.11G Wireless USB Adapter User Guide 3.1.4 Profile Management This window saves the general wireless parameters for different profiles, which is used to fast connect the wireless network you need. UP/DOWN: To change the profile’s sequence in the list. Connect: To activate one profile. New: To create a new profile and configure the site status and security setting. Modify: To modify one existing profile. Delete: To delete one existing profile. 15 WL-700G-M 802.11G Wireless USB Adapter User Guide (Site Status) (Security Setting) 16 WL-700G-M 802.11G Wireless USB Adapter User Guide 17 WL-700G-M 802.11G Wireless USB Adapter User Guide 3.1.5 Statistics Statistics is used to summarize Rx and Tx data packets, including the success and error packet amount. Clear: click this button to renew the statistics. 3.1.6 WPS Setting WPS setting is enabled only on WPS-compliant devices. 18 WL-700G-M 802.11G Wireless USB Adapter User Guide PIN Enter the Pin code and click the “PIN” to automatically connect the wireless adapter with wireless devices around. PBC Click the “PBC” to complete auto-check and connections between wireless adapter and other wireless device. Refresh: to update the Pin code. Rescan: to rescan the WPS-compliant wireless network around. Disconnect: to disconnect the connected wireless network. 19 WL-700G-M 802.11G Wireless USB Adapter User Guide 3.2 AP Mode 3.2.1 AP Mode Topology The device also can serve as an access point to transmit wireless signals and create wireless network, allowing other wireless clients to access the network. Click the AP Mode icon to enter the AP Mode interface. 20 WL-700G-M 802.11G Wireless USB Adapter User Guide 3.2.2 Basic Setting This window is used to configure the AP’s basic parameters, including SSID, Wireless Mode and Channel. SSID: Wireless network’s ID name scanned by wireless adapter. Wireless Mode: 802.11b/802.11g/802.11b/g mixed. Channel: 1~11 channels provided. Restore Default: to restore the set parameters to default factory default settings. Apply: to make the changes made take effect. 21 WL-700G-M 802.11G Wireless USB Adapter User Guide 3.2.3 Security Setting This window is used to configure the wireless network’s security authentication, providing WEP, WPA-PSK, WPA2-PSK, and WPA-PSK/WPA2-PSK encryption methods. WEP:10/26 bits Hex or 5/13 ASCII support. WPA-PSK:8~32 bits ASCII support. WPA2-PSK:8~32 bits ASCII support. WPA-PSK/WPA2-PSK:8~32 bits ASCII support. 22 WL-700G-M 802.11G Wireless USB Adapter User Guide Note: 1. The Hex characters include 0~9 numbers and a~f letters. 2. ASCII characters include any numbers/letters and characters. 3.2.4 Access Control Access Control is based on the MAC address to decide that the specified client connects to the wireless network, or disables it to access the wireless network. 23 WL-700G-M 802.11G Wireless USB Adapter User Guide Filter Policy: Disabled: to disable the filter function. All Permitted: to permit all clients in the list to access the wireless network. All Blocked: to refuse all clients in the list to access the wireless network. MAC Address to input the client’s MAC address to implement the corresponding filter policy. For example: b0000a8cd702. Add: to add the entered MAC address into the list. Delete: to delete one existing MAC address in the 24 WL-700G-M 802.11G Wireless USB Adapter User Guide list. Remove All: to delete all clients’ MAC address in the list. Apply: to make the changes made take effect. 25 WL-700G-M 802.11G Wireless USB Adapter User Guide 3.2.5 About This window displays something about software version and wireless adapter. 26 WL-700G-M 802.11G Wireless USB Adapter User Guide Appendix One: Acronyms and Terms WLAN 802.11 Wireless Local Area Network A family of specifications developed by the IEEE for WLAN technology. 802.11a An extension to 802.11 WLAN standard that provides up to 54 Mbps transmission in the 5 GHz UNI radio band. 802.11b An extension to 802.11 WLAN standard that provides up to 11 Mbps transmission in the 2.4 GHz ISM radio band. 802.11b uses DSSS modulation. 802.11g An extension to 802.11 WLAN standard that provides up to 54 Mbps transmission in the 2.4 GHz ISM radio band. 802.11b uses OFDM modulation and is backwards compatible with 802.11b. Ad-Hoc A group of computers each with wireless adapters, connected as an independent WLAN. AES Advanced Encryption Standard 27 WL-700G-M 802.11G Wireless USB Adapter User Guide BSSID Basic Service Set ID DHCP Dynamic Host Configuration Protocol DSSS Direct Sequence Spread Spectrum. DSSS is one of two types of spread spectrum radio. frequency-hopping The spread other is spectrum (FHSS). QoS Quality of Service OFDM Orthogonal Frequency Division Multiplexing RADIUS Remote Authentication Dial In User Service RTS Request to Send SSID Service Set Identifier. A 32-character unique identifier attached to the header of packets sent over a WLAN that acts as a password when a mobile device tries to connect to the BSS. TCP/IP Transmission Control Protocol/Internet Protocol TKIP Temporal Key Integrity Protocol WDS Wireless Distribution System 28 WL-700G-M 802.11G Wireless USB Adapter User Guide WEP Wired Equivalent Privacy. A security protocol for WLANs defined in the IEEE 802.11 standard. WPA Wi-Fi Protected Access WPA2 Wi-Fi Protected Access 2. The next generation of Wi-Fi security, based on the 802.11i standard. WPA2-PSK Wi-Fi Protected Access 2-Pre-shared Keys WPA-PSK Wi-Fi Protected Access-Pre-shared Keys 29 WL-700G-M 802.11G Wireless USB Adapter User Guide Appendix Two: Product Specification Standard IEEE802.11g, IEEE802.11b, Port USB2.0 Frequency Range 2.4GHz 54 Mbps, 48 Mbps, 36 Mbps, 24 Transmission Rate Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps, 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps Transmission Power Max. 18dbm Modulation Method OFDM, CCK Working Temper. 0 Storage Temper. -40 Working Humidity 10 40 70 90 30 RH non-condensing WL-700G-M 802.11G Wireless USB Adapter User Guide Appendix Three: How to connect with PSP Topology of PSP connecting with WL-700G-M 1. To configure PSP with Ad-Hoc mode 1.1 Select Network Settings 31 WL-700G-M 802.11G Wireless USB Adapter User Guide 1.2 Select Ad-Hoc mode 2.3 Select Channel 32 WL-700G-M 802.11G Wireless USB Adapter User Guide 2. In WL-700G-M Utility Interface scan PSP and double-click to connect the wireless network. 3. In Site Survey check “enable PSP connection mode” box. 33 WL-700G-M 802.11G Wireless USB Adapter User Guide 4. To configure Xlink Kai Select “Start”→ “All programmers” → “Xlink Kai Evolution VII” → “Start Kai Config” to configure the user name, password and other parameters as follows. 34 WL-700G-M 802.11G Wireless USB Adapter User Guide 5. Login Xlink Kai Select “Start”→ “All programmers” → “Xlink Kai Evolution VII” → “Start Kai”. PSP will connect with Xlink Kai automatically. The following window will indicate the connection is established well now. 35
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement