advertisement
DEUTSCH
ENGLISH
FRANÇAIS
NEDERLANDS
ESPANOL
KTV 100
Table of Contents
I Precautions
II Accessories
III Description Of Appearance
IV Description of Remote Controller
V Basic port Connect
VI Operation InStruction For Alarm Clock
Radio System
VII DVB-T In Stallation Guide
VIII DVB-T MENU Operation Guide
IX Troubleshooting
X Technical Parameters
1
6
9
2
3
9
12
13
20
21
I Precautions
Storage
1. Keep this product away from extremely hot or cold places. The
storage temperature ranges from -20 to 60 and the working
temperature from -5 to 40 .
2. Do not use this product at damp environment like bathtubs, wash
basins, washtubs, as well as basements, swimming pools or similar
places.
3. Protect TFT Display from bumping.
4. Do not push on or scrub this product with sharp objects.
Maintenance
1. Disconnect all cables of this device at first before cleaning.
2. Wipe the enclosure, screen and keys using soft cloth with a little
soft detergent on.
3. Do not use polishing cloth, abstergent, and all types of propellants or
chemical detergents like alcohol and benzene to clean your device.
Special Notice
Bright spots or dark spots may appear on the screen. This is a normal phenomenon associated with the active matrix display technology and is not a sign of malfunction. Do not attempt to maintain. For any failures, please turn off your TV set immediately and contact us or your dealer. This device integrates a great deal of fine electronic components. Disassembly or alternation may result in damages or breaks.
1
II Accessories
1. Knighthead
2. Screws
3. Remote control
4. AAA type batteries
5. Operation Instructions
6.Mounting Template paper
* Open the package and make sure all the items are included.
2
III Description of Appearance
1. SKIP/TUNE: Radio Tuning/ Time Adjustment Key. When the Radio
function is enabled, press this key to tune in downwards; hold this
key to search down, and it will automatically stop when find a
channel. When in Time Adjustment mode, press the key to adjust
the hour or minutes in a stepping-down way; hold the key to adjust
the hour or minutes rapidly. In Memory status, press the key to
select channels in a descending order.
2. SKIP/TUNE+ : Radio Tuning/ Time Adjustment Key. When the Radio
function is enabled, press this key to tune in upwards; hold this key
to search up, and it will automatically stop when find a channel.
When in Time Adjustment mode, press the key to adjust the hour or
minutes in a stepping-up way; hold the key to adjust the hour or
minutes rapidly. In Memory status, press the key to select channels
in an ascending order.
3. TIMER : Timer Set Key. When the TV receiver is in service or
standby, press this key to enter timer setting mode (1-90 minutes).
Press " SKIP/TUNE+ " or " SKIP/TUNE" to change minutes, and
press " TIMER" again to complete the setting.
4. TV/AUX: TV/AUX Switch. When the TV receiver is in service, press
this key to switch between TV and AUX modes.
5. FM: FM Switch. When the TV receiver is in service, press this key to
enable FM function in RADIO system.
3
6. MEMORY: Memory Key. When receiving FM programs, press this
key to enable Channel Memory function; press " SKIP/TUNE+ "/
" SKIP/TUNE" or " CH+/" to select broadcasting channels you want
to put into memory; and press " MEMORY " again to complete the
process.
7. CLOCK/ALARM : Clock Display Key. When the TV receiver is in
service or standby, press this key to show the time and clock face
of current Alarm Clock 1 and Alarm Clock 2. Hold this key to enter
setting mode, in which you can set the hour and minute of current
time, AL1 and AL2 (Display of the hour or minute flickers in setting
mode). Press " SKIP/TUNE+ " or " SKIP/TUNE" to adjust the time.
When alarm times of 2 alarm clocks are the same, only AL1 is
available.
8. SLEEP/SNOOZE : Sleep/ Snooze Key. When the TV receiver is in
service, press this key to set the time for automatic shutdown in 90,
80, 70, 60, 50, 40, 30, 20, 10 minutes; and press the key again to
complete the setting. When the TV receiver is in Sleep status, press
the key to cancel Sleep function. In Alarm Clock status, press the
key to start Snooze (with intervals of 8 minutes), and the display will
read "SNOOZE".
9. EQ: EQ Key. When the TV receiver is in service, press this key to
set the sound effect to: Rock, Jazz, Pop, Classic, or Normal.
10. : Pause Key. In TV mode, press this key to stop the playing of
the picture, and press it again to exit pausing status; under FM
mode, press this key for seconds can realize channels auto-
searching, when entering media play, press this key to pause
media playing.
11. USB: USB Mode Key. Press this key to enter USB file interface
directly under TV mode.
12. Remote Controller Receiving Window.
13. MENU: Menu Key. In Radio FM mode, press this key to select from
monophony and stereo modes. In TV/AUX mode, press the key to
show system menu.
14. CH+: Channel Up/ Alarm Clock 1 Mode Set Key. When receiving
broadcasting programs, press this key to call channels from the
memory in an ascending order. In Memory status, press the key to
select the place for channels to be put into memory in an ascending
order. In standby, press the key to set Alarm Clock 1 to 3 modes:
Alarm Clock 1, Radio 1, and TV1. In TV status, press the key to
channel up. When TV or AUX menu is open, press the key to
select items upwards.
4
15. OK: Enter Key. When the setting menu of TV interfaces is open,
press this key to complete parameter adjustment and enable
related functions.
16. VOL+: Volume Up Key. When the TV receiver is in service, press
this key to turn up; when in TV or AUX menu status, press the key
to adjust parameters.
17. STANDBY : Power/ Standby/ Alarm Cancel Key. Press this key to
turn on the TV receiver or enter into standby mode. When in Alarm,
Clock status, press the key to cancel the alarm.
18. CH-: Channel Down/ Alarm Clock 2 Mode Set Key. When receiving
broadcasting programs, press this key to call channels from the
memory in a descending order. In Memory status, press the key to
select the place for channels to be put into memory in a descending
order. In standby, press the key to set Alarm Clock 2 to3 modes:
Alarm Clock 2, Radio 2, and TV2. In TV status, press the key to
channel down. When TV or AUX menu is open, press the key to
select items downwards.
19. VOL-: Volume Down key. When the TV receiver is in service, press
this key to turn down; when in TV or AUX menu status, press the
key to adjust parameters.
20. USB Interface.
21. Speaker.
22. TFT Liquid Crystal Display
23. Television antenna input.
24. External video input.
25. External audio MONO (left) input.
26. External audio MONO (right) input.
27. External DC Power jack(Optional).
28. Power cord.
29. FM antenna.
5
IV Description of Remote Controller
POWER
MENU
USB
CH+
MUTE
INFO
TEXT
SUBTITLE
DTV MODE
EXIT
VOLOK VOL+
PAUSE AUDIO
SKIP/TUNER
P.ADJ
CH-
CLOCK
AL.SET
ALARM
SET1
FAVOR GUIDE
ALARM
SET2
EPG SEARCH
TIMER SNOOZE SLEEP FM
EQ MEMORY MONO TV/AUX
1. POWER: Boot/standby/alarm cancel button. Switch between booting
and standbying for each press. When alarm, press this button to
cancel the alarm.
2. MUTE: Mute Key. Press this key to switch between enabling Mute
function and exiting this function.
3. INFO: Program Information Display Key. In TV mode, press this key
to show the information of current program.
4. TEXT: Text Information Key. In TV mode, press this key to enable
TEXT function and view text information.
5. 0-9: Number Key. In TV mode, press them to select from preset TV
programs.
6. SUBTITLE: Subtitle Key. In TV mode, press this key to open Subtitle
Language Menu for you to select subtitle language. (Available only
when the program supports it.)
9. DTV MODE: TV Radio/TV Program Switch. In TV mode, press this
key to switch between TV program and radio program.
8. USB: USB Mode Key. Press this key to enter USB file interface
directly under TV mode.
6
9. : Return Key. In TV mode, press this key to switch between
current program and previous program.
10. MENU: Menu Key. In TV/AUX mode, press this key to open
corresponding main menus.
11. EXIT: Exit Key. In TV mode, press this key to exit menu and related
functions.
12. VOL+/ VOL-/ : Volume Adjustment Key. In FM/ TV/AUX mode,
press this key to adjust the volume. When TV System Menu is
open, the key functions as Right/Left Direction key.
13. OK: Enter Key. In TV mode, press this key to show corresponding
program lists. When the TV menu is open, press the key to enter
the item.
14. CH+/ CH-/ : Channel Up/Down Key. In FM/TV mode, press this
key to change channels. When TV System Menu is open, the key
functions as Up/Down Direction key.
15. PAUSE: Pause Key. In TV mode, press this key to pause the
playing of the picture; and press it again to exit pausing status.
press this key for seconds can realize channels auto-searching.
16. AUDIO: Audio Switch. In TV mode, press this key to show audio
information of the current program; and press direction key to
switch sound channels.
17. P.ADJ: Picture Adjustment Menu Key. In TV/AUX status, press this
key to set brightness, contrast, chroma, hue (available only in N
system), Vertical Flip, Horizontal Flip, 4:3/ 16:9 and other
adjustment items and reset.
18. CLOCK: Clock Display Key. When the TV receiver is in Power on or
standby, press the key to show the time and clock face of current
Alarm Clock 1 and Alarm Clock 2. Hold this key to enter setting
mode , in which you can set the hour and minute of current time,
AL1 and AL2. (Display of the hour or minute flickers in setting
mode) Press "SKIP/TUNER" to adjust the time. When alarm times
of 2 alarm clocks are the same, only AL1 is available.
19. SKIP/ TUNER: Radio Tuning/ Time Adjustment Key. When the Radio
function is enabled, press this key to tune in; hold this key to search,
and it will automatically stop when find a channel. When in Time
Adjustment mode, press the key to adjust the hour or minutes in a
stepping way; hold the key to adjust the hour or minutes rapidly. In
stepping way; hold the key to adjust the hour or minutes rapidly. In
Memory status, press the key to select channels.
7
20. AL.SET: Alarm Clock Set Key. Press this key to set Alarm Clock1
and Alarm Clock2 to: BUZZER/ RADIO/ TV.
21. FAVOR: Favorite Program Lists Switch. In DTV mode, press this
key to switch favorite program lists; press "OK" key to open the
selected list.
22. GUIDE: 9-Image Program Guide Key. In TV mode, press this key
to enter 9-Image Program Guide mode.
23. EPG: Electronic Program Guide Key. In TV mode, press this key to
show Electronic Program Guide Interface.
24. SEARCH: Search Key. In TV mode, press this key to show Autom
atic Search Confirmation Interface. Press "OK" key to start
automatic search.
25. : Red Key. In TV mode, press this key to enable corresponding
functions shown on the operation interface.
26 . : Green Key. In TV mode, press this key to enable corresponding
functions shown on the operation interface.
27 . : Yellow Key. In TV mode, press this key to enable corresponding
functions shown on the operation interface.
28 . : Blue Key. In TV mode, press this key to enable corresponding
functions shown on the operation interface.
29. TIMER: Timer Set Key. Press this key to enter Timer Adjustment
mode. Press "SKIP/ TUNER" key to adjust the time. Press "TIMER"
again to finish the adjustment and start countdown.
30 . FM: FM Switch. When the TV receiver is in service, press this key
To enable FM function in RADIO system.
31. SNOOZE: Snooze Key. When alarm clock buzzes, press SNOOZE,
then the clock will not buzz until 8 minutes later.
32. SLEEP: Sleep Timer key. Press this key to set the time for the TV
receiver to shutdown.
33. EQ: EQ Key. Press this key to switch sound effect among ROCK,
JAZZ, POP, CLASSIC, and NORMAL.
34. TV/AUX: TV System Work Mode Key. When the TV receiver is in
service, press this key to switch between TV and AUX.
35. MEMORY: Memory Key. In FM mode, press this key to enter
Memory status; use "CH+/-" or "SKIP+/-" key to select channels;
and press "MEMORY" again to finish the process.
36. MONO: FM Stereo Switch. In FM mode, press this key to set sound
output into stereo or monophony.
8
V Basic port Connect
Connect to USB
Set in DTV mode, open the USB cover, insert USB storage device into the jack.
Connection jack on the right of the machiner
VI Operation Instruction for Alarm Clock Radio
System
1 .Time setting
( CLOCK on remote)
Press for 3 seconds Hour setting
( CLOCK on remote)
Press one time
( CLOCK on remote)
Press one time
Minute setting
Alarm 1 hour setting
9
( CLOCK on remote)
Press one time Alarm 1 minute setting
( CLOCK on remote)
Press one time Alarm 2 hour setting
( CLOCK on remote)
Press one time Alarm 2 minute setting
2. Alarm setting (standby status)
a."CH-" (ALARM SET2 key on remote) press to choose Alarm/Radio/
TV.
b. "CH+" (ALARM SET1 key on remote) press to choose Alarm/Radio
/TV.
3. Snooze/Turn off alarm
a. While the alarm ring, press SNOOZE to pause, it will ring again
after 8 minutes.
b. While the alarm ring, press POWER to stop, it will ring at this time
next day.
4. Sleep time setting
Press SLEEP key to choose sleep time to be (90, 80, ......10) minutes.
5. Calculagraph
Press TIMER key, then press SKIP+/-(TUNE+/-) to adjust time of calculagraph:
10
Then press TIMER key to confirm.
6. Radio operation
A
. Press FM to selected Radio.
B.
P ress " " for three seconds can realize all auto-searching mode
and to be all FM band searching, channels will be stored once
searched and continue searching.
C. Press and hold SKIP+/- to manual search stations.
D.
Press SKIP+/-(TUNE+/-) to select stored station as below.
Press MEMORY :
Press CH+/- to choose memory position:
Then press MEMORY to confirm.
E. Press CH+/- can choose the stored stations.
F. Utmost 30 channels to be stored.
11
VII DVB-T Installation Guide
When first time usages or program list do not exist, the DVB-T
Installation Guide will display once the device is turned ON. Please set up as the following Pictures.
Press key to move the cursor to your wanted item, press to adjust with your local DVB-T standard setting.
Note: If the "COUNTRY" setting is incorrect, less or even no channel can be received. After setting, press "OK" key for auto scan or press the "GREEN" key on the remote control for manul scan.
7.1 Auto-Scan will empty the program list, then following your selected COUNTRY to scan the local DVB-T signal frequency and bandwidth. It might take quite a while for the Auto-Scan, program will be autosave. Press "EXIT" to stop Auto-Scan.
7.2 Manual-Scan enables to add Scaned program into the program list, while the exist program list will not be deleted. The same frequency and bandwidth channel will be covered. Choose the Channel number for Manual-Scan (press the "RED" key on the remote control to put directly digit numbers to edit channel number) or insect correct frequency and bandwidth, then press "OK" to start Manual-Scan.
12
VIII DVB-T MENU Operation Guide
Press "MENU" from the remote control or from the device to enter
MENU surface, there will be five menu and some sub-menu under.
Press to switch each menu, then press to select sub-menu, press OK to enter sub-menu.
Press to move cursor to your wanted location.
8.1 SETUP
There's 6 sub-menu under "SETUP", press to setup specifications and return to factory default, please confirm "SETUP" befare receiving channels.
8.1.1 Installation
Under "Installation" Menu for the following items:
(1)Search settings on the program please refer to Chapter VII.
(2) Antenna Setting: setting for ON/OFF the Antenna.
(3)LCN: ON/OFF for logical program list.
13
8.1.2 TV Setup
Under "TV Setup" Menu for the following items:
(1) TV format: Display mode, '4:3LB', '4:3PS', '16:9LB' and '16:9FIT'.
(2) TV mode: AV output system, selection of 'PAL', 'NTSC', 'AUTO'.
(3) OSD Transparency: Setting for OSD transparency levels.
(4) Banner Display Time: Menu banner time display setting.
(5) Video Enhancement: Setting for Picture enhancement.
Note: Some items request supported by the TS.
8.1.3 Password
Under "Password", you can setup items you wish to lock with your password (ie: MENU, Channels) or change password.
(1)Setup Menu Lock: when this function is activate, user will need to
enter password when re-enter Menu.
(2)Channel Lock: when this function is activate, user will need to enter
password if wish to enter TV/Radio list or Anto-Scan and Manual-
Scan.
(3)Censorship Lock: Able to setup according to age groups.
(4)Change Password: Enter both current and new password to change
password.
The default password of the device is 0000, please memorize after
changing password.
14
8.1.4 Advance Timer
Uers can setup appointed time to watch appointed Channels, start and finish time can be setup according to the timer system in this device, please confirm with the timer system from this device before setting up; Detailed guide as follow:
8.1.5 SW Update
Available to be updated via other device or external memory devices.
8.1.6 Set Default
Press key to move the cursor to "Set Default", press "OK" to confirm. After Set Default, program list will be deleted and return to first time installation Gide surface.
8.2 TV/RADIO
For "TV" and "Radio", "List" and "Guide" operation will remain the same in both "TV" and "RADIO" mode, below are the operational for "TV".
8.2.1 Enter TV List Menu, press to select the channels you wish to edit, press to select the item you wish to edit, from left to right as: Favorites, Lock, Edit, Skip Delete and Search. Follow the below picture to operate, press "YELLOW" key to save setup.
15
When LCN setup as "OFF", (see 8.1.1) the following Menu surface will be appear: Move and Sort are for setting channels in order.
8.2.2 Enter "TV Guide" Menu, under the program gide, you can see the current channels display list, press to move the cursor to the channel you wish to watch, press key to enter the Guide timer of the selected Channel, press "RED" key to move Channel to "Advance
Timer".
8.3 MULTIMEDIA
Press USB key to enter this mode under TV mode.
Operation Guide for "USB":
This device supports many brands of USB, Multi Media Card in the market.
1. USB memories of all types should be smaller than 2G, or they may
not be supported.
2. This device supports JPEG, MP3, WMA, VCD and AVI (do not
support DIVX3.11 format and AC3 audio zip fo mat and VOB format).
Note:
1. TS under 1000KBP/S can be play very smoothly otherwise it may
stop.
16
2. The USB plug do not support Card reader, mobile harddisk, MP3
and MP4 device.
8.3.1 Enter "My Album"
Press , key to select the picture you wish to view, press "OK" to confirm as follow:
Press "INFO" from the remote control for viewing tools, press key to move the picture for clock wise or anti-clock wise, press key to select next or previous picture, press "RED" from the remote control for Zoom in function, after zoom in, press , key to move picture. "GREEN" key for ON/OFF background music, "YELLOW" key for leftward or rightward, "BLUE" key for upward or downward. When background music is ON, press to for volume up or volume down; background music play surface remains the same as in music play surface, please refer to 8.3.4.
8.3.2 When viewing Picture, press "EXIT" key to enter 12 picture Guide mode.
Press , key to select the picture you wish to view, press "OK" to view, press 'BLUE' in the remote control to return to the original file
Menu.
17
8.3.3 When viewing Picture, press OK key to enter Picture
playing mode and auto-switch to different effect to view the picture.
Press "INFO" from the remote control for playing tools, press key to select previous or next pictures, press "RED" for play/pause;
"GREEN" key to open background music surface, background music play surface remains the same as in music play surface, please refer to 8.3.4: "YELLOW" key for circulate mode, able to select circulate play or single play; "BLUE" key for picture play speed setting, fast, medium and slow
8.3.4 Enter My Music surface.
Press , key to select the music you wish to play, press "OK" to confirm, press "RED" from the remote control for play/pause,
"GREEN" key for stop, "YELLOW" key for repeat, press this key respectively can select "Repeating", "Repeat all", "Random", "Repeat
OFF"; "BLUE"key for fast forward, press this key respectively can select X2, X3,X4, play. Key in this case is volume key, when the music is not playing, press this keyas s elect key .
18
8.3.5 Enter My Movie surface
Press , key to select the item you wish watch, Press "OK" key to play, as follow:
Press "INFO" for play tools, press key to select previous or next movie, press "RED" key for play/pause; "GREEN" key for stepforward;
"YELLOW" key for fast backward, press this key respectively for backward X2, X4, X8, X16, X32 and play; "BLUE" key for fast forward, press this key respectively for forward X2, X4, X8, X16, X32 and play; when playing movie, press "AUDIO" from the remote control to switch left/right sound track.
8.4 GAME
Under "GAME" menu, there will be 3 sub-menu "Gomoku", "Calender",
"Calculator". Select the sub-menu, press "OK" to enter.
Note:
Calculator supports maximum 9 digit numbers, "INFO" as confirm key.
19
IX Troubleshooting
The following phenomenon does not indicate failures. Before you contact us for repair, please check your device according to the approaches below.
Problems
No picture or sound
No signal
No sound
Mosaic images
Signal search failure
Too-dark images
Time is incorrect; no memory function
Causes
Power wire is not properly connected; the functioning power source is not recognized; or there're breaks in the power wire.
Check whether the antenna is located well; Check the parameter of image or region is set correctly; if not, please set or search again.
If the volume is turned down to the minimum; single is too weak, and Silence function is active.
Check whether the antenna is adjusted properly;
The signal strength is too weak.
Check whether the country and region is set right;
Maybe the signal intensity is too poor.
Check whether the brightness and contrast of your display is adjusted well; if not, readjust it.
The battery power may be low or drained to total emptiness. Please replace battery.
Special Notice: This player is controlled by microcomputer chip. For the following abnormal phenomena, such as maloperation, display disorder, bad radio reception and system disorder caused by lightning, please unplug the power and remove battery for about one minute.
After it is reset, install battery and insert power plug, then the player can be back to normal.
20
X Technical Parameters
Radio Receiving Frequency Range: FM87.5MHz-108MHz
Radio Adjustment Step: 50KHz
Radio Sensitivity: FM 10dBuV
Radio Signal-to-noise ratio: FM 40dB
TV Receiving Frequency: 177.5MHz - 858MHz
TV Receiving Input Power: -85dBm - 0dBm
LCD Size: 7 inch
LCD Aspect Ratio: 16:9
LCD Resolution: 480 RGB 234
LCD Light Source: LED
LED Life: more than 10,000 hours
Power Supply: AC INPUT 100-240V 50/60Hz
DC INPUT 12V/2A
Speaker Output Power: more than 1.2W
2CH; THD 10%
Power Consumption: less than 22W
Dimensions: 360mm 290mm 78mm
Weight: about 2200g
Note:
Batteries only power the system clock. When main power is off, clock and memory remains the same and the TV receiver stops playing.
Because system clock is powered by batteries, the time display will be still correct when the TV receiver is reconnected to main power and begins to play.
21
Warning:
This operation instruction is only intended for reference. No further
notice is available to any modification of all information contained
therein. Due to continuing improvements, the features and design
are subject to change without notice.
No repairable components exist in the machine. Don't try to dismantle
and improve the monitor, and the high voltage in the machine may
cause danger. Maintenance and adjustment of the monitor is subject
to professionals.
WARNING:
To prevent injury, this apparatus must be securely attached to the
floor/wall in accordance with the installation instructions.
The mains plug is used as the disconnect device, the disconnect
device shall remain readily operable, and it shall be disconnected
from the mains completely.
The plug is used as disconnect device form the mains supply, the
plug shall remain readily operable.
The apparatus should not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed on
the apparatus.
No naked flame sources, such as lighted candles, should be placed
on the apparatus.
Batteries (battery pack or batteries installed) shall not be exposed
to excessive heat such as sunshine, fire or the like.
Danger of explosion if battery is incorrectly replaced. Replaced only
with the same or equivalent type.
22
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement