T E C H N O L O G Y

Memory Module Specification

KHX2000C9AD3T1K3/6GX

6GB (2GB 256M x 64-Bit x 3 pcs.) DDR3-2000MHz

CL9 240-Pin DIMM Kit

DESCRIPTION:

Kingston's KHX2000C9AD3T1K3/6GX is a kit of three 256M x 64-bit 2GB (2048MB) DDR3-2000MHz CL9 SDRAM

(Synchronous DRAM) memory modules, based on sixteen 128M x 8-bit DDR3 FBGA components per module. Each module kit supports Intel ® XMP (Extreme Memory Profiles). Total kit capacity is 6GB. Each module kit has been tested to run at DDR3-2000MHz at a low latency timing of 9-11-9 at 1.65V. The SPDs are programmed to JEDEC standard latency DDR3-1333MHz timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers and requires +1.5V.

The JEDEC standard electrical and mechanical specifications are as follows:

FEATURES:

JEDEC standard 1.5V ± 0.075V Power Supply

VDDQ = 1.5V ± 0.075V

667MHz fCK for 1333Mb/sec/pin

8 independent internal bank

Programmable CAS Latency: 5,6,7,8,9,10

Posted CAS

Programmable Additive Latency: 0, CL - 2, or CL - 1 clock

Programmable CAS Write Latency(CWL) = 7(DDR3-1333)

Keyed

Keyed

Keye d

8-bit pre-fetch

Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]

Bi-directional Differential Data Strobe

Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)

On Die Termination using ODT pin

Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE . 95°C

Asynchronous Reset

PCB : Height 2.401” (61.00mm) w/ heatsink, double sided component

PERFORMANCE:

CL(IDD)

Row Cycle Time (tRCmin)

Refresh to Active/Refresh Command Time (tRFCmin)

Row Active Time (tRASmin)

Power

UL Rating

Operating Temperature

Storage Temperature

9 cycles

49.5ns (min.)

110ns

36ns (min.)

1.800 W (operating per module)

94 V - 0

0 o C to 85 o C

-55 o C to +100 o C

Document No. 4805509-001.A00

03/04/10 Page 1

Kingston

MODULE DIMENSIONS:

T E C H N O L O G Y

30.00

18.80

15.80

11.00

8.00

0.00

Units: millimeters

w/ heatsink assembly

133.35

61mm

2.401

Document No. 4805509-001.A00

Page 2