- Computers & electronics
- Computer cables
- DisplayPort cables
- Martin
- P3-050 System Controller
- User guide
Martin P3-050 System Controller Guide
Add to My manuals1 Pages
Martin P3-300 System Controller: Take control of your lighting with advanced features and connectivity options.
With its DisplayPort++ interface, the P3-300 allows for seamless connection to a variety of monitors, including DVI-D, VGA, HDMI, and DisplayPort. This versatility makes it compatible with a wide range of setups and display preferences.
For users seeking a comprehensive lighting control solution, the P3-300 excels with its ability to manage up to 3,072 parameters. This extensive capacity enables the creation of intricate lighting designs and effects, catering to even the most demanding productions.
advertisement
![Martin P3-050 System Controller Guide | Manualzz Martin P3-050 System Controller Guide | Manualzz](http://s3.manualzz.com/store/data/026671960_1-7f2aec5551484be8d36bf89a655a373b-360x466.png)
Martin P3-050 / P3-150 / P3-300™
Monitor connection information note
This information applies to P3-050, P3-150 and P3-300 System Controllers running software v. 4.0.3 or newer.
Connecting a monitor to the P3 System Controller™
Martin P3-050, P3-150 and P3-300 System Controllers feature a DisplayPort++ (also known as
Dual-mode DisplayPort) interface for connection of a monitor to display the local user interface. The
DisplayPort++ interface allows a variety of monitor types to be connected via suitable adapters. This document outlines the adapters tested and found suitable by Martin Professional™. Other types and/or brands of adapters may work perfectly but have not been tested by Martin Professional.
Connecting a DVI-D monitor
Use one of the following adapters:
• HP FH973AT
• Lindy 41490
• Startech DP2DVI
• Startech DP2DVI2
• Startech DP2VGDVHD
Connecting an HDMI monitor
Use one of the following adapters:
• Startech DP2HDMI
• Startech DP2HDMI2
• Startech DP2VGDVHD
Connecting a VGA monitor
Use one of the following adapters:
• Startech DP2VGA1
• Startech DP2VGA2
• Startech DP2VGA3
• Startech DP2VGDVHD
• Cable Depot HDHDPORT-VGACAB
Connecting a DisplayPort monitor
From software v. 4.0.3, Martin™ P3-050, P3-150 and P3-300 System Controllers also support
DisplayPort monitors.
If you have any problems installing your P3 System Controller that are not covered here or in the Quick
Guide supplied with the product, please check the Tech Docs / Product Support pages on the Martin™ website at www.martin.com for any updated documentation. You can also contact your local Martin distributor or call the Martin 24-hour service hotline on +45 8740 0000, or in the USA on
1-888-tech-180.
©2014-2016 Martin Professional ApS. Olof Palmes Allé 18, DK-8200 Aarhus N, Denmark. Information subject to change without notice. Martin Professional
ApS and all affiliated companies disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to use or reliance on the information contained in this document. The Martin logo, the Martin name and all other trademarks in this document pertaining to services or products by Martin Professional ApS or its affiliates and subsidiaries are trademarks owned or licensed by Martin
Professional ApS or its affiliates or subsidiaries.
P/N 35000646 Rev. D
advertisement