Caliber RDD570BT Owner Manual

GPS NAVIGATION SYSTEM

iGO NAVIGATION SOFTWARE MANUAL

Copyright note

The product and the information contained herein is subject to change without prior notification.

This manual may not, in whole or in part, be reproduced or transmitted in any form either electronically or mechanically, including photocopying and recording, without the express written consent of

Nav N Go Kft..

© 2008 -

Nav N Go Kft..

Data Source © 2006 Tele Atlas N.V.

Austria:

Denmark: ©

France:

© BEV, GZ 1368/2003

DAV

© IGN France

Great Britain: Ordnance Survey data with permission of Her Majesty’s Stationery Office © Crown

Copyright

Italy: ©

Northern © Ordnance Survey of Northern Ireland

Ireland:

Norway: © Norwegian Mapping Authority, Public Roads Administration / Mapsolutions

Swisstopo

The

Netherlands:

Topografische ondergrond

Copyright © dienst voor het kadaster en de openbare registers, Apeldorn

All rights reserved.

2

Thank you for choosing

the product as your door-to-door in-car navigator. Read the Quick Start

Guide first and start using the product right away. This document is the detailed description of the software. You can easily discover the product while you are using it; however, we still recommend that you read this manual to understand the screens and the features of the product.

3

Table of contents

1 Warnings and Safety information .................................................................................. 7

2 Getting started with the product.....................................................................................8

2.1 Buttons and other controls on the screen ............................................................................... 10

2.1.1 Using keyboards.............................................................................................................................11

2.2 Using the map......................................................................................................................... 11

2.2.1 Checking the details of a map location ..........................................................................................12

2.2.2 Manipulating the map ....................................................................................................................12

2.2.3 Lane information and Signposts.....................................................................................................15

2.2.4 Status information and hidden controls on the map .......................................................................15

2.2.5 Using the Cursor (the selected map location) ................................................................................18

2.3 The product concepts ............................................................................................................. 19

2.3.1 Smart Zoom ...................................................................................................................................19

2.3.2 Position markers.............................................................................................................................19

2.3.2.1 Current GPS position and Lock-on-Road ............................................................................................... 19

2.3.2.2 Returning to normal navigation.............................................................................................................. 20

2.3.2.3 Selected location (Cursor) ...................................................................................................................... 20

2.3.2.4 Original position in the Cursor menu ..................................................................................................... 20

2.3.3 Daytime and nightcolour schemes .................................................................................................21

2.3.4 Colour scheme in tunnels...............................................................................................................21

2.3.5 Route calculation and recalculation ...............................................................................................21

2.3.6 Itinerary..........................................................................................................................................22

2.3.7 Route demonstration ......................................................................................................................23

2.3.8 POI (Points of Interest) ..................................................................................................................23

2.3.9 Speed limit warning .......................................................................................................................23

3 Navigating with the product.......................................................................................... 25

3.1 Selecting the destination of a route ........................................................................................ 25

3.1.1 Selecting the Cursor as the destination ..........................................................................................25

3.1.2 Entering an address or part of an address.......................................................................................26

3.1.2.1 Entering an address (Europe)................................................................................................................. 26

3.1.2.2 Entering an address if house numbering is restarted.............................................................................. 27

3.1.2.3 Entering an address without knowing the district/suburb....................................................................... 28

3.1.2.4 Selecting an intersection as the destination ............................................................................................ 29

3.1.2.5 Selecting a city centre as the destination ................................................................................................ 30

3.1.2.6 Entering an address with a postal code .................................................................................................. 31

3.1.2.7 Tips on entering addresses quickly ......................................................................................................... 32

3.1.3 Selecting the destination from your Favourites..............................................................................32

3.1.4 Selecting the destination from the POIs.........................................................................................33

3.1.5 Selecting the destination from the History.....................................................................................34

3.1.6 Selecting the destination by entering its coordinates .....................................................................34

4

3.2 Creating a multi-point route (inserting a via point) ............................................................... 35

3.3 Creating a multi-point route (appending a new destination) ................................................. 35

3.4 Editing the route ..................................................................................................................... 36

3.5 Watching the simulation of the route...................................................................................... 36

3.6 Pausing the active route ......................................................................................................... 37

3.7 Deleting the next via point from the route .............................................................................. 37

3.8 Deleting the active route......................................................................................................... 37

3.9 Saving a route......................................................................................................................... 38

3.10 Loading a saved route .......................................................................................................... 38

4 Reference Guide ............................................................................................................. 39

4.1 Map screen ............................................................................................................................. 39

4.1.1 Icons on the map ............................................................................................................................42

4.1.1.1 GPS position quality indicator................................................................................................................ 42

4.1.1.2 Status indicator strip............................................................................................................................... 42

4.1.1.3 Next two route events (Turn Preview fields) ........................................................................................... 42

4.1.2 Objects on the map.........................................................................................................................43

4.1.2.1 Streets and roads .................................................................................................................................... 43

4.1.2.2 3D object types ....................................................................................................................................... 44

4.1.2.3 Elements of the active route .................................................................................................................... 44

4.1.3 Avoid menu....................................................................................................................................45

4.1.4 Cursor menu...................................................................................................................................45

4.1.5 Position menu ................................................................................................................................47

4.1.6 Route Information screen...............................................................................................................47

4.1.7 Trip Information screen .................................................................................................................48

4.1.7.1 Trip Computer screen ............................................................................................................................. 50

4.1.8 Quick menu....................................................................................................................................51

4.1.9 GPS Data screen ............................................................................................................................52

4.2 Find menu ............................................................................................................................... 53

4.3 Route menu ............................................................................................................................. 54

4.4 Manage menu ......................................................................................................................... 54

4.4.1 Manage Saved Routes....................................................................................................................55

4.4.2 Manage History..............................................................................................................................55

4.4.3 Manage POIs..................................................................................................................................55

4.4.4 Manage Favourites.........................................................................................................................57

4.4.5 User Data Management..................................................................................................................57

4.5 Settings menu.......................................................................................................................... 58

4.5.1 Map Screen settings .......................................................................................................................59

4.5.2 Navigation settings.........................................................................................................................60

4.5.3 Route Planning options ..................................................................................................................60

4.5.4 Regional settings............................................................................................................................62

4.5.5 Menu settings .................................................................................................................................63

5

4.5.6 Warning settings ............................................................................................................................63

5 Glossary........................................................................................................................... 65

6 End User Licence Agreement........................................................................................ 67

6

1 Warnings and Safety information

The product is a navigation system that helps you find your way to your destination with its built-in

GPS receiver.

The product does not transmit your GPS position; others cannot track you.

It is important that you look at the display only when it is safe to do so. If you are the driver of the vehicle, we recommend that you operate the product before you start your journey. Plan the route before your departure and stop if you need to change something in the route.

You must obey the traffic signs and follow the road geometry. If you deviate from the route that the product recommended, the product changes the instructions accordingly.

For more information, consult the End User Licence Agreement (page 67).

7

2 Getting started with the product

The product is optimised for in-car use. You can use it easily by tapping the screen buttons and the map with your fingertips.

The product can plan routes throughout the whole installed map set; you do not need to change maps or switch to a poorly detailed general map to navigate between map segments or countries.

Tasks

Using a stylus

Double tapping the screen

Tapping and holding the screen

Instructions

You do not need a stylus to use the product. Tap the buttons and the map with your fingertips.

You do not need to tap the screen twice for any action. With buttons and controls, a single tap is enough.

You do not need this to access the basic navigation functions. Tap and keep pressing the following buttons to reach extra functions:

•

Tap and hold on the Map screen: you can set the minimum and maximum zoom level of Smart Zoom.

•

Tap and hold any of the buttons on the

Map screen: you can set or reset the zoom value of the button (2D map).

•

Tap and hold any of the buttons on the

Map screen: you can set or reset the tilt and zoom values of the button (3D map).

•

Tap and hold menu appears.

on list and menu screens: the Navigation

•

Tap and hold any of the , , , , , and

buttons on the Map screen: you can rotate, tilt or scale the map continuously.

•

Tap and hold on keyboard screens: you can delete several characters quickly.

•

Tap and hold continuously.

or in long lists: you can scroll pages

•

Tap and hold the buttons in the Quick menu to open screens related with the function of the button from the Manage menu or the Settings menu.

Gestures (drag&drop)

You do not need gestures to access the basic navigation features. You need to drag and drop the screen only in cases like:

•

Moving the handle on a slider.

•

Moving the map: grab the map, and move it in the desired direction.

•

Shortcut to open the Map screen: slide your finger from the bottom

8

Tasks Instructions

right corner to the bottom left corner on any screen.

•

Shortcut to open the Navigation menu: slide your finger from the top left corner to the bottom left corner on any screen.

Start using [Productname]

When the product is started the first time, you need to do the following:

1. Select the written language of the application interface. Later you can change it in Settings

(page 62).

2. Select the language and speaker used for voice guidance messages. Later you can change it in Settings (page 62).

3. Read the warning message and tap Accept to continue.

After this, the Navigation menu appears and you can start using the product.

The typical way of using the product is to select a destination, and start navigating. You can select your destination in the following ways:

•

Use the selected location on the map (the Cursor) (page 25).

•

Enter a full address or a part of an address, for example a street name without a house number or the names of two intersecting streets (page 26).

•

Enter an address with postal code (page 31). This way you do not need to select the name of the settlement and the search for street names might be faster as well.

•

Use a coordinate (page 34)

•

Use a saved location:

• a Favourite (page 32)

• a POI (page 33)

• the History of previously set destinations and waypoints (page 34)

9

2.1 Buttons and other controls on the screen

When you are using the product, you usually tap buttons on the touch screen.

You only need to confirm selections or changes in the product if the application needs to restart, it needs to perform a major reconfiguration, or you are about to lose some of your data or settings.

Otherwise, the product saves your selections and applies the new settings without confirmation as soon as you use the controls.

Type Example Description How to use it

Button

Icon

List

Tap it to initiate a function, to open a new screen, or to set a parameter.

Tap it once.

Shows GPS position quality.

Some icons also function as a button. Tap them once.

When you need to select from several options, they appear in a list.

Move between pages with the and buttons and tap the value that you want.

Slider

Switch

Virtual keyboard

When a feature has several different unnamed values, the product shows an indicator on a gauge that displays and sets a value from a range.

•

Drag the handle to move the slider to its new position.

•

Tap the slider where you want the handle to appear; the thumb jumps there.

When there are only two choices, a checkmark shows

Tap it to turn the switch on or off. whether the feature is enabled.

Alphabetic and alphanumeric keyboards to enter text and numbers.

Each key is a touch screen button.

10

2.1.1 Using keyboards

You only need to enter letters or numbers in the product when you cannot avoid it. You can type with your fingertips on the full-screen keyboards and you can switch between various keyboard layouts, for example ABC, QWERTY, or numerical.

Task Details

Switching to another keyboard layout, for example from an English

QWERTY keyboard to a Greek keyboard

Tap keyboard types.

, and select from the list of available

The product remembers your last keyboard choice and offers it the next time you need to enter data.

Correcting your entry on the keyboard

Remove the unneeded character(s): tap .

Tap and hold the button to delete the entire input string.

Entering a space, for example between a first name and a family name or in multi-word street names Tap

Entering symbols

.

Tap to switch to a keyboard offering symbol characters.

Finalising the keyboard entry

Tap .

2.2 Using the map

The map screen is the most frequently used screen of the product. It can be accessed from the

Navigation menu by tapping .

For further information about the map screen, see page 39.

11

2.2.1 Checking the details of a map location

•

If you are interested in the details of your current position during navigation:

1. Check the bottom line of the map. It shows the current street and house number information.

2. For further details, tap to open the Position menu.

3. Tap displayed.

. The address, the coordinate and the list of nearby POIs will be

•

You can check the details of any other location by selecting it on the map:

1. Tap the map anywhere to open the map control buttons.

2. Tap the desired location on the map. The Cursor ( the location is displayed at the bottom of the map.

) appears there. The address of

3. For further details, tap to open the Cursor menu.

4. Tap displayed.

. The address, the coordinate and the list of nearby POIs will be

•

It is even easier if you select the desired point in the Find menu. Then the Cursor menu opens automatically. You only need to tap the button.

2.2.2 Manipulating the map

Position markers on the map:

•

Current GPS position: (page 19)

•

Selected location (Cursor): (page 20)

The following controls help you modify the map view to suit your actual needs the best. Most of these controls appear only if you tap the map once, and disappear after a few seconds of inactivity.

Action

Moving the map with drag&drop

Button(s)

No buttons

Description

You can move the map into any direction: tap and hold the map, and move your finger to the direction in which you want to move the map.

If GPS position is available and you have moved the map, the button appears.

Tap this button to return to the GPS position.

12

Action

Opening/closing map control buttons

Zooming in and out

Tilting up and down

Rotating left and right

Viewing modes

,

Button(s)

,

,

, ,

Description

Tap this button to show or hide the following map control buttons:

•

Rotate left/right (3D map only)

•

Tilt up/down (3D map only)

•

Zoom preset buttons (2D map only)

•

Tilt and zoom preset buttons (3D map only)

•

Return to GPS position button

Changes how much of the map is displayed on the screen.

The product uses high-quality vector maps that let you see the map at various zoom levels, always with optimised content. It always displays street names and other text with the same font size, never upside-down, and you only see the streets and objects that you need.

Map scaling has different limits in 2D and in

3D map view modes.

Changes the vertical view angle of the map in

3D mode.

Changes the horizontal view angle of the map in 3D mode.

When

GPS position is available, the product always rotates the map so its top faces your direction of travel (Track-Up orientation). You can turn away from Track-Up with these buttons.

If GPS position is available and you have rotated the map, the button appears.

Tap this button to re-enable the automatic map rotation.

Gives you the following map perspectives in the product:

• classic top-down view (2D), the top of the map always faces North

• top-down view (2D), the top of the map always points in the current driving direction

• perspective view (3D) the top of the map always points in the current driving direction

The icon always shows the mode the button

13

Action

Smart Zoom

Returning to normal navigation (back to the

GPS position with automatic map rotation)

Zoom preset buttons

Tilt and zoom preset buttons

Map scale

Button(s) Description

switches to: If you are in 3D mode, you can see the button and you need to tap it to switch to 2D mode.

The product can automatically rotate, scale and tilt the map and give you the optimal view:

• When you are approaching a turn, the product zooms in and raises the view angle to let you easily recognise your manoeuvre at the next junction.

•

If the next turn is at a distance, the product zooms out and lowers the view angle to show you the road in front of you.

Tap this button once to enable Smart Zoom.

Tap&hold the button to set the zoom limits of

Smart Zoom.

Tap this button to move the map back to the current GPS position. If the map has been rotated in 3D mode, automatic map rotation is also re-enabled.

Tap one of the preset buttons to set the zoom level to a fix, predefined value. Smart Zoom is disabled. These buttons are available in 2D mode.

Tap&hold any of the buttons to set its value to the current zoom level, or to reset it to its original value.

Tap one of the preset buttons to set the tilt and zoom levels to fix, predefined values. Smart

Zoom is disabled. These buttons are available in 3D mode.

Tap&hold any of the buttons to set its value to the current tilt and zoom levels, or to reset it to its original value.

The product shows the scale of the map in

2D mode.

14

2.2.3 Lane information and Signposts

When navigating on multilane roads, it is important to take the appropriate lane in order to follow the recommended route. If lane information is available in the map data, the product displays the lanes and their directions using small arrows either at the bottom or at the top of the map (the position of these arrows can be modified in Map Screen settings). Arrows in (Undefined variable:

BrandingVariables.LaneToTake) represent the lanes you need to take.

Where there is additional information available, signposts substitute arrows. Signposts are always displayed at the top of the map. The colour and style of the signposts are similar to the real ones you can see above road or by the roadside. They show the available destinations and the number of the road the lane leads to.

All signposts look similar when cruising (when there is no recommended route). When navigating a route, only that signpost is displayed in vivid colours that points to the lane(s) to be taken; all others are darkened out.

-

-

2.2.4 Status information and hidden controls on the map

The following information appears in the rounded field in the top left corner, the Turn Preview field.

When tapping this area, the result depends on the information currently shown.

Icon

,

Information

There is no active route

GPS position.

Details

If there is no route to be navigated, this icon appears in the Turn Preview field.

Action

Tap this area to open Find. there is no valid GPS position, the view of the sky above you is shown with coloured dots for each satellite. Some dots

Tap this area to open the Route

Information screen. need to turn green to be able to navigate.

If the icon is a static picture, route calculation is needed

If the icon is animated, route calculation is in

GPS position and an active route are available, but automatic off-route recalculation is switched off, and you deviated from the route.

The product is calculating or recalculating the route.

Tap this area to make the product recalculate the recommended route.

Nothing happens if you tap this area of the screen.

15

Icon

,

Information

progress

Next route event

(next manoeuvre)

Details Action

GPS position and an active route are available, and you navigate the recommended route. This area gives you

Tap this area to open the Route

Information screen. information about the type and distance of the next route event.

The following area appears next to the above described rounded area. When tapping this area, the result depends on the information currently shown.

Icon

,

Information

There is no valid

GPS position

Traffic restriction

Details Action

If there is no valid GPS position, this symbol appears here.

Tap this area to open the GPS

Data screen to check the signal status or the connection settings.

When GPS position is available but there is no route to be navigated, the traffic restriction of the upcoming intersection is shown here if there is any.


Second route event

(manoeuvre after the next manoeuvre)

When GPS position and an

Tap this area to open the active route are both available, this field shows the route event that follows the next route event shown in the

Itinerary screen with the turn by turn guidance instructions. above described area.

Stops the running simulation

Route Simulation.

Tap this area to stop the simulation.

Route recalculation progress

Indicator strip

During route recalculation, this field shows the recalculation progress between 0% and

100%.


- sounds muted/enabled


16

The following symbols appear in the Indicator strip:

Icon Description

The sound output of the product is muted.

The sound output of the product is enabled.

The following information can be seen in the three data fields shown on the map screen. Tap this area to open the Trip Information screen where you can select which values to be shown in these three fields.

When there is no active route, these fields show the following information: current speed, compass and the current time of day.

Icon

Compass

Type More information

Shows the direction of your heading both when the map is automatically rotated (3D) and when the map is always facing North (2D).

Speed information

There are speed values that can be shown:

•

Speed limit on the current road

Time information

There are time values that can be shown:

•

Current GPS time

•

Time remaining to reach the destination

•

Time remaining to reach the next via point

•

Estimated arrival time at the destination

•

Estimated arrival time at the next via point

Distance information

There are distance type values that can be shown:

•

Distance remaining to reach the destination

•

Distance remaining to reach the next via point

The next area is the GPS position quality indicator field. Tap this area to open the Quick menu (page

51).

Icon Status for

GPS position quality

More information

A higher number of lit bars indicates better GPS position accuracy.

17

2.2.5 Using the Cursor (the selected map location)

First, place the Cursor at the desired map location with one of the following options:

•

Use the Find menu to select a location. The map returns with the selected point (the Cursor) in the middle, and the Cursor menu appears with the available options.

•

Tap the screen and tap again to place the Cursor at the desired location. Now tap open the Cursor menu.

You can perform the following actions:

Button

to

Action

In the active route, uses the Cursor as the start point by replacing the current

GPS position

In the active route, uses the Cursor as the destination by replacing the previous destination

In the active route, uses the Cursor as a via point (an intermediate destination) preceding the destination

In the active route, uses the Cursor as the destination while keeping the previous destination as a via point

Shows the different routes calculated by the available routing methods.

Choose the one that suits your needs the best

Saves the Cursor as a POI

Saves the Cursor as a Favourite location

Marks the map with a Pin at the Cursor

Opens a screen with the name, address and coordinate information of the

Cursor, and the list of POIs near it

18

2.3 The product concepts

2.3.1 Smart Zoom

Smart Zoom provides much more than just a usual automatic zoom feature:

•

While following a route calculated by the product:

when approaching a turn, it will zoom in and raise the view angle to let you easily recognise your manoeuvre at the next junction. If the next turn is at a distance, it will zoom out and lower the view angle to be flat so you can see the road in front of you.

•

While driving without an active route in the product:

Smart Zoom will zoom in if you drive slowly and zoom out when you drive at high speed.

Enabling Smart Zoom

Tap the map to let the map control buttons appear, and then tap to enable Smart Zoom.

Fine-tuning Smart Zoom

Tap the map to let the map control buttons appear, and then tap and hold

Zoom Settings window. Modify the zoom limits of Smart Zoom if necessary.

to open the Smart

2.3.2 Position markers

2.3.2.1 Current GPS position and Lock-on-Road

When your GPS position is available, the product marks your current position with the on the map.

The icon is aligned to the nearest road to suppress GPS position errors. The direction of the icon is one of the directions of the route.

To use the current GPS position, tap position as one of the following:

. The Position menu appears and you can save the GPS

icon

19

• a map marker Pin

2.3.2.2 Returning to normal navigation

When GPS position is available, and you have moved the map (the icon is moving or is not even visible), or you have rotated the map in 3D mode, the button appears. Tap it to move the map back to the GPS position and re-enable Track-up map orientation (automatic map rotation).

Note!

Even if you move the map while you are driving, the product continues navigating if there is an active route: it plays the voice instructions and displays the turn preview icons according to your current GPS position.

2.3.2.3 Selected location (Cursor)

If you select a location in the Find menu, or you tap the map when the map control buttons are visible, the Cursor appears at the selected point on the map.

The product displays the Cursor with a radiating red dot (

3D map view.

) to make it visible at all zoom levels, even when it is in the background of a

When the Cursor is set, tap the following:

• the start point of a route

• a via point in a route

. The Cursor menu appears and you can use the Cursor as one of

• the destination of a route

You can also search for POIs around the Cursor.

Or you can save the location of the Cursor as:

• a map marker Pin

2.3.2.4 Original position in the Cursor menu

(

When the Cursor menu is open, a special icon ( opened with.

) shows the Cursor position the menu was

You can move and zoom the map, and you can set the Cursor to a different place. The usual Cursor

) appears, and the buttons of the Cursor menu initiate actions for this new location.

To return to the original Cursor position, tap

Cursor menu was opened, and the

. The map jumps back to the position with which the

icon appears again.

20

2.3.3 Daytime and nightcolour schemes

The product uses different colour schemes during the day and during the night.

•

Daytime colours are similar to paper road maps.

•

The night colour schemes use dark colours for large objects to keep the average brightness of the screen low.

The product offers different daytime and night colour schemes. It can also switch automatically between the daytime and the night scheme based on the current time and GPS position a few minutes before sunrise, when the sky has already turned bright, and a few minutes after sunset, before it becomes dark.

2.3.4 Colour scheme in tunnels

When entering a tunnel, the colours of the map change. All buildings disappear, the large objects

(such as surface waters or forests) and the empty areas between roads become black.

However roads and streets keep their original colours from the daytime or night colour scheme currently used.

After leaving the tunnel, the original colours return.

2.3.5 Route calculation and recalculation

The product calculates the route based on your preferences:

• Fast

• Short

• Economical

• Easy

• Motorways

• Ferries

The product automatically recalculates the route if you deviate from the proposed itinerary.

For further information about Route Planning options, see page 60.

21

2.3.6 Itinerary

The Itinerary is the list of the route events, that is, the driving instructions.

22

When you are on the Map screen, you can display the Itinerary in one of the following ways:

•

Tap the area between the Turn preview and the Travel data fields where the symbol of the second next manoeuvre is displayed (for example ).

•

Tap the following buttons: , ,

You have the following options on the Itinerary screen:

Button

Any of the list items

.

Description

Opens the map with the selected manoeuvre in the middle.

Changes the detail level of the Itinerary. The levels are as follows:

•

Detailed Instructions: all intersections are listed

•

Itinerary: only significant intersections (the ones announced in voice guidance) are listed

•

Road list: the list of the roads used while navigating the route

Moves between pages for additional list items.

,

When the map is open with a manoeuvre in the middle:

Button Description

Zooms in the map.

Zooms out the map.

Moves the map to show the previous or next manoeuvre.

,

Opens a screen where you can avoid a part of the route starting from the selected manoeuvre.

2.3.7 Route demonstration

A simulation drives you through the route, following the driving instructions (page 36).

You can use it, for example, to see which bridge the product planned for the route; if you do not want to take that bridge, you can avoid it.

Route demonstration can be started from the Route menu by tapping the button.

2.3.8 POI (Points of Interest)

A point of interest (POI) is a location that someone might find useful or interesting.

The product is delivered with thousands of POIs and you can also create your own POIs in the application.

POI locations are marked on the map with special icons. POI icons are quite large so you can easily recognise the symbol. The icons are also semi-transparent: they do not cover the streets and intersections behind them.

POIs are grouped into several levels of categories and subcategories. The icon of a POI that comes with the map shows the symbol of the POI category. If you save your own POI, you can select an icon for it independently of the POI category you have put it in.

Saving POIs

To save a POI, place the Cursor (

,

) at the desired location, then tap the following buttons:

.

,

Managing POIs

You can select which POI groups to show and which ones to hide on the map, and from which zoom levels POI icons are visible. At the same place you can manage your saved POIs. A saved POI can be renamed, moved to a different POI group, its icon can be changed, or a phone number and additional information can be added to it. Tap the following buttons: , , .

2.3.9 Speed limit warning

Maps sometimes contain information about the speed limits of the road segments. This information may not be available for your region (ask your local dealer) or may not be fully correct for all roads on the map.

You can configure [Productname] to warn you if you exceed the current limit. Tap the following buttons: , , ,

When you exceed the speed limit, the following happens:

.

23

•

Visible Warning: A symbol with the speed limit appears in the corner of the map (for example:

).

•

Audible Warning: A voice message is played using the selected voice guidance profile.

24

3 Navigating with the product

You can set up your route in the product in several ways:

• if you need a simple route (a route with only one destination, without any intermediate via points), you can select the destination and start navigating to it right away

• you can plan a multi-point route

• you can also plan a route independently of your current GPS position or even without GPS reception

3.1 Selecting the destination of a route

The product offers you several ways of choosing your destination and via points (intermediate destinations):

•

Use the selected location on the map (the Cursor) (page 25).

•

Enter a full address or a part of an address, for example a street name without a house number or the names of two intersecting streets (page 26).

•

Enter an address with postal code (page 31). This way you do not need to select the name of the settlement and the search for street names might be faster as well.

•

Use a coordinate (page 34)

•

Use a saved location:

• a Favourite (page 32)

• a POI (page 33)

• the History of previously set destinations and waypoints (page 34)

Tip!

If you are going to use a route later, save it before you start navigating. Tap the following buttons: , , .

3.1.1 Selecting the Cursor as the destination

1. Locate your destination on the map: move and scale the map as needed (page 12).

) appears. 2. Tap the location that you want to select as your destination. The Cursor (

3. Tap to open the Cursor menu.

4. The map appears with the selected point in the middle. Tap from the

Cursor menu. The route is then automatically calculated, and you can start navigating.

Tip!

If you know that you will use a destination later, when the Cursor menu appears, save it as a POI, or put it on the list of your Favourites first. The Cursor menu returns automatically with the same point. Now you can use it as a route point.

25

3.1.2 Entering an address or part of an address

If you know at least a part of the address, it is the quickest way to select the destination of the route.

Using the same screen, you can find an address by entering:

• the exact address, including house number

• the centre of a settlement

• the midpoint of a street

• any of the above, starting the search with the postal code (page 31)

3.1.2.1 Entering an address (Europe)

There are four lines on the screen:

The procedure is explained starting from the Navigation menu.

1. Tap the following buttons: , .

2. By default, the product proposes the country and settlement where you are. If needed, tap the button with the name of the country, and select a different one from the list.

3. If needed, change the settlement:

•

To select the settlement from the list of recently used ones, tap the

•

To enter a new settlement:

button.

1. Tap the button with the name of the settlement, or if you have changed the country/state, tap .

2. Start entering the settlement name on the keyboard.

3. Get to the list of search results:

•

After entering a couple of characters, the names that match the string appear in a list.

• Tap automatically.

to open the list of results before it appears

4. Select the settlement from the list.

4. Enter the street name:

1. Tap .

2. Start entering the street name on the keyboard.

26

3. Get to the list of results:

•


• Tap

to open the list of results before it appears automatically.

4. Select the street from the list.

5. Enter the house number:

1. Tap .

2. Enter the house number on the keyboard.

3. Tap to finish entering the address.



3.1.2.2 Entering an address if house numbering is restarted

There are long roads where house numbering is restarted at some point. This way the same house number can appear twice or even more times on the same road. If this is the case, after entering the house number, you need to select the appropriate address by the district/suburb information.



2. By default, [Productname] proposes the country/state and settlement where you are. If needed, tap the button with the name of the country/state, and select a different one from the list.


•


•


button.




•





27


1. Tap .



•


• Tap




1. Tap .



6. A list appears with the matching addresses. Tap the desired one.



3.1.2.3 Entering an address without knowing the district/suburb

Long roads can run across several districts or suburbs. You may not know what particular house number is located where. In this case, follow the instructions below:



2. By default, [Productname] proposes the country/state and settlement where you are. If needed, tap the button with the name of the country/state, and select a different one from the list.


•


•


button.




•


28





1. Tap .



•


• Tap


4. Instead of selecting one of the streets, tap


.

1. Tap .



6. A list appears with the matching addresses. Tap the desired one.



3.1.2.4 Selecting an intersection as the destination



2. By default, the product proposes the country/state and settlement where you are. If needed, tap the button with the name of the country/state, and select a different one from the list.


•


•


button.




29

•






1. Tap .



•


• Tap



button.

•

If only a few intersecting streets exist, their list appears immediately.

•

In case of a longer street, a keyboard screen appears. Start entering the name of the intersecting street on the keyboard. As you type, if the matching streets can be shown on one screen, their list appears automatically.

6. Tap the desired intersecting street in the list.



3.1.2.5 Selecting a city centre as the destination

The City Centre is not the geometric centre of the settlement but an arbitrary point the map creators have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is an important intersection.





•


•


button.


30



•





button.



3.1.2.6 Entering an address with a postal code

All of the above address searching possibilities can be performed with entering the postal code instead of the settlement name. Find below an example with a full address:




3. Tap the button with the name of the settlement, and enter the postal code:

1. Start entering the postal code on the keyboard.


•

After entering a couple of numbers, matching results appear in a list.

• Tap


3. Pick the settlement from the list.


1. Tap .



•


• Tap




1. Tap .

31





3.1.2.7 Tips on entering addresses quickly

•

When you are entering the name of a settlement or a street, the product only displays those characters that appear in possible search results. The other characters are greyed out.

•

When entering the settlement name or the street name, tap the couple of letters; the product lists the items that contain the specified letters.

•

You can speed up finding an intersection:

button after a

• Search first for the street with a less common or less usual name; fewer letters are enough to find it.

•

If one of the streets is shorter, search for that one first. You can then find the second one faster.

•

You can search for both the type and the name of a road. If the same word appears in several names, for example in the name of streets, roads and avenues, you can obtain the result faster if you enter the first letter of the street type: For example, enter Pi A to obtain Pine Avenue and skip all Pine Streets and Pickwick Roads.

•

You can also search in postal codes. This is useful when a street name is common and it is used in several districts of a city.

3.1.3 Selecting the destination from your Favourites

You can select a location that you have already saved as a Favourite to be your destination.



2. Tap the Favourite that you want to set as your destination.



32

3.1.4 Selecting the destination from the POIs

You can select your destination from the POIs included with the product or from the ones you have previously created.



2. Select the area around which the POI should be searched for:

•

: The POI will be searched for around a given address.

•

: The map appears with the Cursor in the middle. Modify the location of the Cursor if necessary, then tap location.

. The POI will be searched for around the given

•

•

: The POI will be searched for around the current GPS position.

: The POI will be searched for around the destination of the active route.

•

: The POI will be searched for not around a given point, but by the size of the detour it adds to the active route. This can be useful if you search for a later stopover that causes only a minimal detour, for example upcoming petrol stations or restaurants.

3. You can narrow the search with the following:

•

Select the POI group (e.g. Accommodation), and after that, if needed, select the POI subgroup (e.g. Hotel or Motel).

•

To find the POI by its name, tap name.

, and use the keyboard to enter a part of the

•

To list all POIs in a given POI group, tap

4. [optional] When finally the list of results appear, you can sort the list:

.

• location)

: sort the list alphabetically (available when you search around a single

•

: sort the list by the distance from your current position in a straight line

(available when you search around a single location)

•

: sort the list by the distance to drive on route from your current position

(available when you search along the active route)

33

•

: sort the list by the size of the needed detour (available when you search along the active route)

5. Tap the desired POI in the list.



3.1.5 Selecting the destination from the History

The destinations that you have set earlier appear in the History.



2. If necessary, move between pages with

3. Tap the desired item.

to see earlier destinations.



3.1.6 Selecting the destination by entering its coordinates



to change the format of the displayed coordinates.

3. Tap the latitude or longitude value to change the coordinates.

4. Enter the coordinate values in WGS84 format on the keyboard: the latitude (N or S) and the longitude (E or W).

5. Tap .



34

3.2 Creating a multi-point route (inserting a via point)

Multi-point routes are created from simple routes, so a route must be active first. One of the ways of expanding the route is to keep the destination, and to add via points (intermediate destinations).

1. Select a new location as you did in the previous sections. This will be the additional destination in the route.

2. The map appears with the selected point in the middle, and the Cursor menu opens automatically.

3. Tap destination of the route.

to add the point as an intermediate destination preceding the final

4. [optional] To add more points to the route, repeat the above steps as many times as you like.

If you insert a via point in a route that is already a multi-point route, you will automatically be taken to the Edit Route screen where you can determine the position of the intermediate route point. When you enter the screen, the new via point is placed as the last via point before the final destination. The new point is the selected point in the list.

You have the following options:

Button Action

The selected point moves up in the list (becomes a via point to be reached earlier). Tap this button repeatedly, and the point becomes the start point of the route.

The selected point moves down in the list (becomes a via point to be reached later). Tap this button repeatedly, and the point becomes the final destination of the route.

The route is reversed. The start point becomes the destination, the destination becomes the start point, and all via points are to be reached in the opposite order than before.

The route is optimised. The start point and the destination remain at their position, but the via points are reordered to make the shortest possible route.

The selected point is removed from the route. The route remains as it was before adding the new point.

Every time a new point is added, the route is recalculated automatically, and you can start navigating right away.

3.3 Creating a multi-point route (appending a new destination)

Multi-point routes are created from simple routes, so a route must be active first. One of the ways of expanding the route is to add a new destination. The previous destination becomes the last via point of the route.

1. Select a new location as you did in the previous sections. This will be the additional destination in the route.

2. The map appears with the selected point in the middle, and the Cursor menu opens automatically.

3. Tap to open the full Cursor menu with the additional functions.

35

4. Tap to add the point as a new final destination demoting the previous one to the last intermediate destination.

5. [optional] To add more points to the route, repeat the above steps as many times as you like.

Every time a new point is added, the route is recalculated automatically and you can start navigating right away.

3.4 Editing the route

Tap the following buttons: , , .

The list of route points appear with the start point at the top of the list and the final destination at the bottom. If several via points exist, you might need to scroll between pages.

Tap one of the route points in the list. You have the following options:

Button Action

The selected point moves up in the list (becomes a via point to be reached earlier). Tap this button repeatedly, and the point becomes the start point of the route.

The selected point moves down in the list (becomes a via point to be reached later). Tap this button repeatedly, and the point becomes the final destination of the route.

The route is reversed. The start point becomes the destination, the destination becomes the start point, and all via points are to be reached in the opposite order than before.

The route is optimised. The start point and the destination remain at their position, but the via points are reordered to make the shortest possible route.

The selected point is removed from the route.

As soon as you leave this screen, the route is recalculated automatically, and you can start navigating right away.

3.5 Watching the simulation of the route

The procedure is explained starting from the Map screen.

1. Tap the following buttons:

2. The Route menu appears.

3. Tap announced.

, .

to run the simulation at normal speed and with voice guidance instructions

36

4. The simulation can be aborted any time by tapping .

3.6 Pausing the active route

You do not need to pause the active route: when you start driving again, the product restarts the voice instructions from your position.

3.7 Deleting the next via point from the route

The easiest way to delete the upcoming route point (the next via point) is to open the Route

Information screen by tapping the Turn Preview field ( ) on the Map screen, and then tapping

.

You have another option. Tap the following buttons: , , , .

3.8 Deleting the active route

The easiest way to delete the active route is to open the Route Information screen by tapping the

Turn Preview field ( ) on the Map screen, and then tapping .

You have another option. Tap the following buttons: , , .

Note!

If via points exist in the active route, you cannot delete the route immediately on the

Route Information screen. Tap disappear and the

repeatedly until all via points

button appears. Tap it to cancel the whole route.

37

3.9 Saving a route


1. Tap the following buttons: , , .

2. Enter a name for the saved route, and then tap .

When you save a route, the product not only saves the route points but the whole itinerary:

•

If you updated your map since you first saved the route, the product recognises the change, and recalculates the driving instructions according to the latest available map information.

• The product deletes from the route any via points that you already left behind during navigation together with the road segments used to reach it. To avoid this, if you want to save the route, you need to save it before you start navigating.

3.10 Loading a saved route


1. Tap the following buttons: ,

2. Tap the route you wish to navigate.

, .

3. In the very likely case when the start position of the saved route is different from the current

GPS position, you need to confirm whether you want to stop navigating from the current GPS position to use the start point of the loaded route.

•

If you choose this option, automatic off-route recalculation will be disabled.

• If you choose to keep the current GPS position as the start point, the route will be recalculated starting from your current position.

4. The map appears, and you can start navigating.

38

4 Reference Guide

On the following pages you will find the description of the different menu screens of the product.

The Navigation menu:

The product starts with the Navigation menu. From there you can access the following screens:

Screen

Map

Button

The Map screen.

Description

Find

Route

Manage

Settings

Selecting the destination (for example an address or a POI) or using the search engine of the product for any other reason (for example to look for the phone number of a POI).

Managing the active route (obtaining information about it, changing or deleting it or parts of it) or planning a route without GPS reception.

Managing user data, such as saved locations (POIs, Favourites,

Pins, and History items), and Saved Routes.

Managing the behaviour of the product, for example the map layout during navigation, the used languages or the warnings.

4.1 Map screen

The product is primarily intended for land navigation. That is why maps in the product look similar to paper road maps. However, the product provides much more than regular paper maps: you can customise the look and the content of the map.

The most important and most often used screen of the product is the Map screen.

During navigation, the screen shows route information and trip data (left screenshot), but when you tap the map, additional buttons and controls appear for a few seconds (right screenshot). Most parts of the screen behave as buttons.

Symbol Name Action

Turn Preview, that is, the next route event

Opens the Route Information screen

Second upcoming route event Opens the Itinerary

Trip data Opens the Trip Information screen

39

Symbol

Top row

Bottom row

, ,

Name

GPS position quality

Action

Opens the Quick menu

Next street n/a

Current street and house numbers on left and right n/a

Map view modes

Switches between 2D and 3D map modes:

,

,

Menu

Opens the Navigation menu

Avoid

Opens the Avoid screen, offering ways to avoid parts of the route

Position menu (appears when navigating a route)

Opens the Position menu

Cursor menu (appears when there is no GPS position or

Opens the Cursor menu the Cursor is not at the current GPS position)

Open/Close Map control buttons

Tap this button to show or hide the following map control buttons:

•

Rotate left/right (3D map only)

•

Tilt up/down (3D map only)

•

Zoom preset buttons (2D map only)

•

Tilt and zoom preset buttons (3D map only)

•

Return to GPS position button

Rotate left, rotate right

Tilt up, tilt down

Rotates the 3D map left or right

Tilts the 3D map

40

,

Symbol

Blue line

Name

Zoom in, zoom out

Action

Scales the map

Return to GPS position

(appears when GPS position is available and you have moved the map)

Tap this button to move the map back to the current GPS position.

If the map has been rotated in 3D mode, automatic map rotation is also re-enabled.

Enable Smart Zoom (replaces the previous button if there is no GPS position or the map has not been moved)

Tap this button once to enable

Smart Zoom.

Tap&hold the button to set the zoom limits of Smart Zoom.

Zoom preset buttons

Tap one of the preset buttons to set the zoom level to a fix, predefined value. Smart Zoom is disabled. These buttons are available in 2D mode.

Tap&hold any of the buttons to set its value to the current zoom level, or to reset it to its original value.

Tilt preset buttons

Current GPS position (on nearest road)

Tap one of the preset buttons to set the tilt and zoom levels to fix, predefined values. Smart Zoom is disabled. These buttons are available in 3D mode.

Tap&hold any of the buttons to set its value to the current tilt and zoom levels, or to reset it to its original value. n/a

Cursor location)

Lane information n/a

Signpost information n/a

Active route

Map scale (2D map only) n/a n/a

41

4.1.1 Icons on the map

There are several status icons on the map. Most of them also function as a button. The information they provide is as follows:

•

Sound status (muted or enabled)

4.1.1.1 GPS position quality indicator

This area is a status indicator, and also acts as a button that opens the Quick menu.

GPS reception quality shows the current accuracy of the position information.


The product has no connection to the GPS receiver: GPS navigation is not possible.

Devices with a built-in GPS receiver are permanently connected. On such devices, the icon does not appear in normal circumstances.

The product is connected to the GPS receiver, but the signal is too weak and the receiver cannot determine the GPS position.

GPS navigation is not possible.

Only a few satellites are received. Position information is available, but elevation (altitude) cannot be calculated.

GPS navigation is possible, but the position error may be significant.

Altitude information is available, the position is a 3D position.

GPS navigation is possible.

4.1.1.2 Status indicator strip

This is a multiple status indicator. It indicates the following status information on a single strip:


The sound output of the product is muted.

The sound output of the product is enabled.

4.1.1.3 Next two route events (Turn Preview fields)

There are two fields reserved on the Map screen to display the next two manoeuvres (route events that are listed in the Itinerary). Both the type of the event (turn, roundabout, exiting motorway, etc.) and its distance from the current GPS position is displayed.

Most of these icons are very intuitive and you also know them as road signs. The following table lists some of the frequently shown route events. The same symbols are used in both fields:


Turn left.

,

42


Turn right.

,

Turn back.

,

Bear right.

,

Turn sharp left.

,

Keep left.

,

Continue straight in the intersection.

,

Enter roundabout. The number of the exit is shown in the circle, but only for the next turn.

,

Enter motorway.

,

Exit motorway.

,

Board ferry.

,

Leave ferry.

,

Approaching the next via point.

,

Approaching the destination.

,

In certain situations when route events are not important, these fields show other useful pieces of information. They are described here: page 15.

4.1.2 Objects on the map

4.1.2.1 Streets and roads

The product shows the streets in a way that is similar to how the paper road maps show them.

Their width and colours correspond to their importance: you can easily tell a motorway from a small street.

Tip!

If you prefer not to see street names during navigation, turn them off (page 59).

43

4.1.2.2 3D object types

To enable or disable 3D visualisation on the map, tap the following buttons: , ,

, .

[Productname] supports the following 3D object types:

Type Description

3D landmarks Landmarks are 3D artistic or block representations of prominent or well-known objects. 3D landmarks are only available in selected cities and countries.

Elevation model Hills and mountains are shown in the background of the 3D map view, and illustrated by colour on the 2D map.

Elevated roads

Complex intersections and vertically isolated roads (such as overpasses or underground tunnels) are displayed in 3D.

3D buildings

3D terrain

Full 3D city building data that represents actual building size and position on the map. Building data is limited to the city centres of major cities in the US and

Europe.

3D terrain map data shows changes in terrain, elevations or depressions in the land when you view the map, and use it to plot the route map in 3D when you navigate.

4.1.2.3 Elements of the active route

The product shows the route in the following way:

Symbol Name

Current GPS position

Description

Your current position displayed on the map. This is not the exact GPS position. The arrow is put on the nearest road.

The location selected in the Find menu, or a map point selected by tapping the map.

Cursor (selected map location)

Start point The first point of the route.

Normally if GPS position is available, it is the start point of the route. If there is no valid GPS position,

The product uses the last known GPS position as the start point.

When you are using a saved route, the product asks you if you want to use your GPS position or the first point in the saved route as the start point.

You can also modify the start point in the Cursor menu. If you do so, automatic off-route recalculation needs to be turned off to keep the selected point as the start point.

If automatic off-route recalculation is disabled for any of the above, tapping the icon in the Turn

Preview field not only initiates route recalculation from the current GPS position, but it will re-enable the

44

Symbol

Via point

Name Description

automatic off-route recalculation as well.

A via point is an intermediate destination. You can place as many via points as you want.

The last point of the route, the final destination. Destination (end point)

Route colour

Active leg of the route

The route always stands out with its colour on the map, both in daytime and in night colour mode. The active leg of the route is always displayed in a brighter shade than the inactive (upcoming) legs.

The section of the route on which you are driving.

If you have not added any via points (only a destination), the entire route is the active leg. If you have added via points, the active leg is the part of the route from your current location to the next route point

(the next via point, or the destination if there are no more via points to reach).

Inactive legs of the route The future sections of the route; each of them becomes active when you reach the via point at its beginning.

Streets and roads that are excluded from the navigation

You can choose whether you want to use or avoid certain road types (page 60). However, when

The product cannot avoid such roads, the route will include them and it will show them in a colour that is different from the route colour.

4.1.3 Avoid menu

This screen contains quick detour possibilities during navigation. It can be opened directly from the

Map screen by tapping .

You have the following options:

•

Tap any of the distance buttons if you want to bypass a part of the route starting from the next intersection.

•

: If you have used the above function before, tap this button to clear the restrictions from the map.

4.1.4 Cursor menu

As soon as you select one point in the Find menu, the map appears with the Cursor menu, a menu with possible actions for the selected point.

Alternatively when you tap the map, control buttons appear. Tap again to place the Cursor, a radiating red dot. Now tap , and the Cursor menu opens with a list of options.

45

In order to show a part of the map with the Cursor menu, it contains only a few buttons first. Tap

Button

to get all the options.

Description

Closes the Cursor menu, and returns to the previous screen.

Zooms out the map.

Zooms in the map.

With the Cursor menu open, you can still move or scale the map, and tap the map anywhere to place the Cursor to a new location, but when you use this button, the Cursor jumps back to the place where it was at the time when you opened the Cursor menu.

Displayed at the Cursor if it is at the same location with which the Cursor menu was opened.

Displayed at the Cursor if it has been relocated since the Cursor menu was opened.

Opens a new screen with the address and coordinate of the Cursor, and the list of nearby POIs.

Opens the full-screen Cursor menu with all the possible options.

A new route is calculated with the Cursor as the destination. The previous route is deleted.

If the Cursor is at or near the destination, this button replaces the previous one, and deletes the current destination from the route. The last via point is promoted as destination, or if there are no via points, the route is deleted.

The Cursor is added to the active route as an intermediate route point, a point to be reached before the destination. If there is already a via point in the route, the Edit Route screen opens to let you decide where the new via point is to appear in the route.

If the Cursor is at or near one of the via points, this button replaces the previous one, and deletes the selected via point from the route. The route is recalculated without the deleted point.

The Cursor is appended at the end of the route as the new destination.

The previous destination is demoted, and becomes the last via point.

This button is similar to the button, but a new screen opens, and the route is calculated with all the possible route calculation methods (Fast, Short, Economical and Easy). Observe the results, and choose one of the routes to navigate.

The Cursor becomes the start point of the route. This means that the route is not started from the current GPS position, and Automatic Off-route

Recalculation needs to be turned off to keep the selected point as the start point.

If the Cursor is at or near the selected start point, this button replaces the previous one and deletes the start point from the route. The current GPS position is used again as the start point, and Automatic Off-route

Recalculation is re-enabled.

The Cursor is saved as a user POI. Select the POI group and give a name for the POI, then select a suitable icon, enter a phone number, and

46


additional information if you like.

Map locations can be marked with Pins. Unlike POIs, a Pin has no name and other details, only a colour to let you tell one from another on the map.

If the Cursor is at or near a Pin, this button replaces the previous one, and deletes the Pin the Cursor is near to.

The location of the Cursor is added to the list of frequently visited destinations, the so called Favourites. You can give a name for the

Favourite.

4.1.5 Position menu

When you follow the recommended route on the map (the Cursor is the current GPS position), the

Position menu replaces the Cursor menu. It does not contain buttons that modify the current route, as the GPS position is not useful as a route point.

To open the Position menu, tap .

4.1.6 Route Information screen

The Route Information screen has all the data and some of the functions you need while you navigate.

There are two ways to open this screen:

•

It can be opened directly from the Map screen by tapping the Turn Preview field (

•

From the Navigation menu, tap the following buttons: , .

).

In the top section of the screen you see information about the current route. The fields on this screen are continuously updated while you keep the screen open.

When you open the screen, all fields contain information about reaching your final destination. Tap any of the fields to see data on the via points starting from the first one through the final destination again.

47

You have the following data and functions on this screen:

Name Description Function

Route line

Estimated Arrival Shows the estimated arrival time at the final destination of the route based on information

Tap this field to change the content of all data fields to via available for the remaining segments of the route.

The calculation cannot take into account traffic jams and other possible delays. point information.

Distance Left

The upper part of this screen shows your planned route as a horizontal line. Its leftmost point is the start of the route, the rightmost one is the final destination, and you can see your via point flags along the line, spaced in proportion to their content of all data fields to via point information. distance.

Tap this field to change the

Shows the distance you need to travel on the Tap this field to change the route before reaching your final destination. content of all data fields to via point information.

Shows the time needed to reach the final Tap this field to change the destination of the route based on information available for the remaining segments of the route.

The calculation cannot take into account traffic jams and other possible delays. content of all data fields to via point information.

Method

Warning icons

This field shows how the route was calculated. It displays the Route Calculation Method: Fast,

Short, Easy or Economical.

Tap this field to change the content of all data fields to via point information.

In these square fields graphical symbols are displayed in case warnings are attached to the

Tap any of the icons for an explanation. planned route. These are warnings, so icons always show information for the whole route, even if the data fields display values from your current position to a via point only.

Appears only if at least one via point exists.

Opens the Route Planning options screen from theSettings menu.

Deletes the next via point from the route.

Appears only if there are no via points in the Deletes the active route. route.

4.1.7 Trip Information screen

The Trip Information screen has both route and travel data you might need during your journey. It can be opened directly from the Map screen by tapping the Trip Data field ( ).

The fields on this screen are continuously updated while you keep the screen open.

48

When you open the screen, all route data fields contain information about reaching your final destination. Tap and the fields concerning your route display data for the next via point. Tap the button repeatedly to toggle between the two options.

You have the following data and functions on this screen:

Name

or

Description

Shows whether the route data fields show information about the final destination (checkered flag) or about the next via point (yellow flag) .

Function

Field next to the flag

Turn Preview

Compass

Speedometer

Shows the type and distance of the next route event.

Shows the current heading. Tap this field to show it on the map screen in one of the Trip

Data fields.

Shows the current speed both graphically and as a number.

Tap this field to show it on the map screen in one of the Trip

Data fields.

Distance

Remaining

Remaining Shows the time needed to reach the final destination of the route based on information

Tap this field to show it on the map screen in one of the Trip available for the remaining segments of the route.

The calculation cannot take into account traffic jams and other possible delays.

Data fields.

Arrival Time

Shows the distance you need to travel on the route before reaching your final destination.


Data fields.

Shows the estimated arrival time at the final Tap this field to show it on the destination of the route based on information available for the remaining segments of the route.

The calculation cannot take into account traffic jams and other possible delays. map screen in one of the Trip

Data fields.

GPS Time

Shows the name or number of the current street or road.

Altitude

Speed Limit

Shows the current time corrected with time zone offset. The accurate time comes from the GPS satellites, and the time zone information comes from the map or it can be set manually in

Regional settings.


Data fields.

Shows the elevation if it is provided by the GPS receiver.


Data fields.

Shows the speed limit of the current road if the map contains it.


Data fields.

Opens a new screen with three resettable Trip

Computers.

Tap this button to change the content of the Route Data fields to show information about the next via point.

If you tap the previous button, this one replaces it. Tap this button and the Route

Data fields show information about the final destination again.

49

Most of the fields on this screen have a symbol next to them. This symbol shows whether the field it is attached to is shown on the map as a Trip Data. It also shows the position of the data as follows:

Symbol Description

This value is not shown on the map screen.

This value appears on the map screen in the Trip Data area. This is the value at the top.

This value appears on the map screen in the Trip Data area. This is the value in the middle.

This value appears on the map screen in the Trip Data area. This is the value at the bottom.

4.1.7.1 Trip Computer screen

The Trip Computer screen provides collected trip data. It can be opened from the Trip Information screen by tapping .

The fields on this screen are continuously updated while you keep the screen open.

You can switch between the trips, pause then resume them, or reset their data.

You have the following functions on this screen:


Pauses the trip currently shown on the screen. Values on the screen stop changing.

This button replaces the previous one if it has been activated. Tap it to resume collecting trip data.

Resets all counters of the currently shown trip. Collecting trip data is restarted only when the product receives a position from the GPS.

Cycles through all trips.

,

50

4.1.8 Quick menu

The Quick menu is a selection of controls that are frequently needed during navigation. It can be opened directly from the Map screen by tapping .

If you tap any of the switches in the Quick menu, the Map screen immediately returns. A switch is on if its lamp is lit.

Name Main function (single tap) Function (tap and hold)

If you only adjust the volume, you need to use this button to return to the Map screen.

Opens the Navigation menu.

Mutes all sounds of the product.

Opens Sound settings.

Switches between the daytime and night colour Opens Colour Profiles schemes manually. This will not disable the automatic switching between the two schemes: the settings. other colour scheme returns at the next scheduled time.

3D buildings can be displayed on the map. Use this switch to suppress them temporarily.

Opens 3D Settings.

Opens the GPS Data screen with satellite information, data coming from the GPS receiver.

No action.

51

4.1.9 GPS Data screen

Tap the following buttons: and to see the status of GPS reception.

, and then to open the GPS Data screen

Icon

Sky view circle

Colour Name Description

Green GPS position quality indicator to the GPS receiver and GPS position information is available in 3D: the product can calculate both your horizontal and vertical GPS position.

Yellow

The product has a connection to the GPS receiver and GPS position information is available in 2D: only the horizontal position is calculated,

The product cannot calculate your vertical GPS position.

Grey

The product has a connection to the GPS receiver but GPS position information is not available.

Red

The product has no connection to the GPS receiver.

Since the device has a built-in

GPS receiver, this status should not appear under normal circumstances.

Green, blinking GPS connection quality indicator the GPS receiver.

Yellow, blinking

The product has no connection to the GPS receiver but it is still trying to establish a connection.

Red, blinking

The product has no connection to the GPS receiver and is not trying to establish a connection.

The virtual sky shows the visible part of the sky above you, with your position as the centre. The

52

Icon

n/a n/a

Colour

Coordinates

Status bar for the satellites


satellites are shown at their current positions. The GPS receives data from both the green and yellow satellites.

Signals from the yellow satellites are only received, while green ones are used by the GPS receiver to calculate your current location.

Your current GPS position in

WGS84 format.

Dark bars are for the yellow and lit bars are for the green satellites. The more satellites your GPS tracks (the green ones), the better is your calculated position.

4.2 Find menu

Select the destination of your route. Tap the following buttons:


, .

Reference

If you know at least a part of the address, this is the quickest way to find the location. page 26

You can select your destination from the thousands of POIs included with the product or from the ones you have previously created. page 33

The destinations that you have already entered in the product are available in the History list. page 34

You can select your destination by entering its coordinates. page 34

You can select as your destination a location that you have already saved as a Favourite. page 32

53

4.3 Route menu

Save, load and edit your routes. Tap the following buttons:


Opens a screen with useful route data.

, .

Reference

page 47

You can browse the driving instructions that the product follows during navigation. You can exclude manoeuvres or page 22 streets to adjust the route to your preferences.

You can modify the route: remove route points or change their order. page 36

Erase the active route with all its route points (start point, via points and destination). If you later decide that you need the same route, you will have to rebuild it from scratch. page 37

You can save the active route for later use.

You can load a previously saved route for navigation. page 38 page 38

Opens the Route settings screen with controls to modify the vehicle, the road types used for route calculation, or the route calculation method. page 60

You can run a demonstration of the route at normal speed.

4.4 Manage menu

You can manage the content that the product stores. Tap the following buttons:


Renaming or deleting saved routes

Deleting History items

Renaming or deleting Favourites

Creating, updating or deleting POIs

Creating, updating or deleting POI groups

Modifying POI visibility settings

Reference

page 55 page 55 page 57 page 55

54

,

4.4.1 Manage Saved Routes

You can manage the previously saved routes. Tap the following buttons:

.

Button

Button with the name of the saved route

Description

Opens the selected route for editing.

Deletes the selected route.

Clears the list of saved routes.


,

, ,

4.4.2 Manage History

You can manage the list of locations you used lately. Tap the following buttons:

.


Deletes the selected item in the History.

Deletes the entire History.


,

, ,

4.4.3 Manage POIs

You can manage your POIs, and set POI visibility for both your POIs and the ones that came with the product. Tap the following buttons:

Button / Icon

Button with the name of the

POI group

Button with the name and address of a POI item

, , .

Description

Opens the list of the subgroups of this POI group. The new list behaves the same as this one.

Opens the selected POI for editing. Only the POIs you have created appear in this list.

Opens the selected POI group for editing.

Tap to filter the list to contain only the POIs that you saved.

55

Button / Icon Description

Tap to see all POIs in the list.

Creates a new POI group at the given group level.


,

This POI group is not shown on the map.

This POI group and all its subgroups are shown on the map.

This POI group and some of its subgroups are shown on the map.

This POI group contains POIs that you saved.

When a POI group is open for editing:


Items in the POI group will not be shown on the map.

The distance buttons set the zoom level from which the items in the

POI group will be shown on the map.

, , ...

Subgroups under the edited POI group will inherit the visibility settings of the POI group.

Button with the icon of the

POI group

Tap this button to select a new icon for the POI group.

Deletes the edited POI group. You are only allowed to remove POI groups that you have created.

When a POI item is open for editing:

Button


POI

Button with the icon of the

POI

Description

Tap this button to rename the POI.

Tap this button to select a new icon for the POI.

Tap this button to enter a telephone number for the POI.

Tap this button to enter additional information for the POI.

Tap this button to delete the selected POI.

Tap this button to move the POI to another POI group or subgroup.

56

4.4.4 Manage Favourites

You can manage the list of your Favourites. Tap the following buttons:

Button


Favourite

Description

Opens the selected Favourite for editing.

,

Deletes the selected item in the list of Favourites.

Clears the list of Favourites.


,

, .

4.4.5 User Data Management

You can manage the data you have saved (Pins, POIs, Favourites, and History) and the settings you have made in the program. Tap the following buttons:

Button

Remove Pins

Backup User Data

, ,

Description

.

Map locations can be marked with Pins using the button in the Cursor menu. Tap this button to remove all your Pins from the map.

All user data and the current settings will be saved on the inserted memory card. There is always one backup file. If you perform a backup later, the previous backup will be overwritten with the new information.

Restore User Data

Delete User Data

Reset All Settings

All user data and settings will be overwritten with the information stored in the backup file. Data and settings created after the latest backup will be lost.

All user data will be deleted, and settings will return to their factory defaults.

All settings will return to their factory defaults, but no user data will be deleted.

57

4.5 Settings menu

You can configure the program settings, and modify the behaviour of the product. Tap the following buttons: , .

The Settings menu has two pages of submenus. Tap to access the other options.

Button Description Reference

You can fine-tune the appearance and content of the Map screen. page 59

You can control how [

M-NV09I] behaves during navigation. page 60

These settings determine how routes will be calculated. page 60

These settings allow you to customise the application for your local language, measurement units, time and date settings and formats, as well as to choose the voice guidance profile you prefer. page 62

You can modify the look and behaviour of the Menu screens. page 63

You can set up the connection to the TMC receiver. This device don’t support TMC function

You can enable speed warning. page 63

This screen has no navigation feature. It merely provides information about the maps and licenses included with your navigation system.

58

4.5.1 Map Screen settings

You can fine-tune the appearance and content of the Map screen. Tap the following buttons:

,

Button

3D Settings

.

Colour Profiles

Elevation on 2D Map

Show Street Names

Lane Information

Description

,

Use 3D settings to determine which of the present 3D objects are shown on the map, and adjust the level of 3D visual detail. The options are as follows:

•

Landmarks: Landmarks are 3D artistic or block representations of prominent or well-known objects. 3D landmarks are only available in selected cities and countries.

• Elevated Roads: Complex intersections and vertically isolated roads (such as overpasses or underground tunnels) are displayed in 3D.

• Building Visibility: Full 3D city building data that represents actual building size and position on the map. Building data is limited to the city centres of major cities in the US and Europe.

• Terrain Detail Level: 3D terrain map data shows changes in terrain, elevations or depressions in the land when you view the map, and use it to plot the route map in 3D when you navigate.

[

M-NV09I] is able to show the map and the menus in different colours during the day and during the night. Select the colour profiles to be used in each mode, and select the automatic or manual switching between the daytime and night colour profiles.

2D maps can also display 3D information. These top-down maps can display elevation by colours and shading.

Street names and POI icons can be disturbing on the map during navigation. With this switch you can suppress these map elements when [

M-NV09I] is following your position on the map. If you move the map, both the street names and POI icons reappear immediately.

Some maps contain lane information to help you position your car in the upcoming intersection. This setting tells [Productname] whether to display this information at the top or at the bottom of the map.

59

4.5.2 Navigation settings

You can control how [

M-NV09I] behaves during navigation. Tap the following buttons:

, .

Button

Keep Position on Road

Off-route Recalculation

Restore Lock-to-Position

Automatic Overview

Description

This feature allows car drivers to always correct GPS position errors by matching the vehicle position to the road network.

By turning off this feature you also turn off the GPS position error filtering. The position shown on the map will be subject to all position errors and position fluctuations.

This switch tells [

M-NV09I] whether to automatically recalculate the route when you deviate from it. If this feature is turned off, you need to initiate route recalculation manually otherwise navigation will be stopped until you return to the originally recommended route.

Setting another point than the current GPS position as the start point of the active route will automatically disable this feature.

If you have moved or rotated the map during navigation, this feature moves the map back to your current GPS position and re-enables automatic map rotation after the given period of inactivity.

This feature switches the map view to Overview mode when the next route event is at a distance. Overview is a zoomed out 2D view to let you see the surrounding area. You have the following controls for

Automatic Overview:

•

Turn Distance for Overview: The map view will be switched to

Overview mode if the next route event is at least as far as this value.

•

Default Zoom Level: Overview mode will appear with this zoom level. You can scale the map in Overview mode but next time

Overview appears again, this zoom level will be applied.

,

4.5.3 Route Planning options

These settings determine how routes will be calculated. Tap the following buttons: , ,

.

Button

Road Types Used for Route

Planning

Description

To let the route fit your needs, you can also set which road types are to be considered for or to be excluded from the route, if possible.

Excluding a road type is a preference. It does not necessarily mean total prohibition. If your destination can only be accessed using some

60

Button

Route Calculation Method

Description

of the excluded road types, they will be used, but only as much as necessary. In this case a warning icon will be shown on the Route

Information screen, and the part of the route not matching your preference will be displayed in a different colour on the map.

You can choose from different route types. The routing method can also be chosen while creating the route: when the destination is selected, tap in the Cursor menu.

Road Types Used for Route Planning:

Type Description

Motorways You might need to avoid motorways when you are driving a slow car or you are towing another vehicle.

Unpaved roads

The product excludes unpaved roads by default: unpaved roads can be in a bad condition and usually you cannot reach the speed limit on them.

Toll roads By default the product includes toll roads (pay roads where there is a peruse charge) in the routes. If you disable toll roads, the product plans the best toll-free route.

Charge roads

Charge roads are pay roads where you can purchase a pass or vignette to use the road for a longer period of time. They can be enabled or disabled separately from toll roads.

Permit needed

You might need a permit or permission from the owners to use certain roads or to enter certain areas.

The product excludes these roads from the route calculation by default.

Ferries

The product includes ferries in a planned route by default. However, a map does not necessarily contain information about the accessibility of temporary ferries. You might also need to pay a fare on ferries.

Cross-border planning

In some cases the route calculated according to your other navigation and route preferences would lead through another country. If you wish to always stay within the same country, turn this option off.

Route Calculation Method types:

Fast

Option

Short

Economical

Easy

Description

Gives the quickest possible route if you can travel at or near the speed limit on all roads. Usually the best selection for fast and normal cars.

Gives a route that has the smallest total distance of all possible routes between the route points. Usually practical for slow vehicles.

Combines the benefits of Fast and Short: the product calculates as if it were calculating the Fast route, but it takes other roads as well to save fuel.

Results in a route with fewer turns. With this option, you can make the product to take, for example, the motorway instead of series of smaller

61

Option

roads or streets.

Description

4.5.4 Regional settings

These settings allow you to customise the application for your local language, measurement units, time and date settings and formats, as well as to choose the voice guidance profile you prefer. Tap the following buttons: , , .

Button

Program Language

Description

This button displays the current written language of the

product user interface. By tapping the button, you can select a new language from the list of available languages. The application will restart if you change this setting; you are asked to confirm this.

Voice Profile

This button shows the current voice guidance profile. By tapping the button, you can select a new profile from the list of available languages and speakers. Tap any of these to hear a sample voice prompt. Just tap OK when you have selected the new spoken language.

Units

You can set the distance units to be used by the program.

The product may not support all the listed units in some voice guidance languages. If you select a measurement unit not supported by the chosen voice guidance language, a warning message will appear.

Set Date & Time Format You can set the date and time format. Various international formats are available.

Time and Time Zone Settings You can access time and time zone settings.

The product helps you with correcting the device time to the ever accurate GPS time.

The product can also help you set the time zone based on your current GPS position.

62

Time and Time Zone Settings:


Auto Time Correction to GPS Use this feature to synchronise the clock of your device to the highly accurate time provided by the GPS receiver.

Use Auto Time Zone

Use this feature to synchronise the time zone of the clock of your device to the time zone based on your current GPS position. This is useful if you travel abroad.

Set Time Zone

Compare GPS and device times

Set time zone manually if you do not want to synchronise the time zone automatically. This allows you to use Auto Time Correction and apply a time zone offset to obtain the desired time.

The current time of the GPS receiver and the device clock are displayed. Please note that the GPS clock is only available with GPS reception. This allows you to check whether any correction is needed.

4.5.5 Menu settings

You can modify the look and behaviour of the Menu screens. Tap the following buttons:

.

Button

Background

Description

, ,

You can choose the image to be used as the menu background image.

4.5.7 Warning settings

You can enable speed warning. Tap the following buttons:

Button

Warn When Speeding

, ,

Description

.

Maps may contain information about the speed limits of the road segments.

The product is able to warn you if you exceed the current limit. This information may not be available for your region (ask your local dealer), or may not be fully correct for all roads in the map. This setting lets you decide whether you wish to receive the warnings. You can set the relative speeding level at which the application warns you

(100% represents the current speed limit):

•

In Built-up Areas: in cities and towns

•

Elsewhere: at all other locations

There are two types of warnings. You can turn them on or off independently:

•

Audible Warning: A voice message is played using the selected voice guidance profile.

63


•

Visible Warning: A symbol with the speed limit appears in the corner of the map (for example: ).

64

5 Glossary

2D/3D GPS reception

The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals. If three satellites are available, the receiver can calculate the horizontal GPS position but the accuracy is lower and the GPS device does not give you elevation data: only 2D reception is possible.

Active route

The currently navigated route. You can save and load routes in the product, but only one route can be active at any given time, and it is always active until you delete it, reach your destination or you quit the product. See also: Route.

City Centre

The City Centre is not the geometric centre of the settlement but an arbitrary point the map creators have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is an important intersection.

GPS accuracy

Several factors have impact on the deviation between your real position and the one given by the

GPS device. For example, signal delay in the ionosphere or reflecting objects near the GPS device have a different and varying impact on how accurately the GPS device can calculate your position.

Map

The product works with digital maps which are not simply the computerised versions of traditional paper maps. Similarly to the paper road maps, the 2D mode of digital maps show you streets, roads, and elevation is also shown by colours. In 3D mode, you can see the altitude differences, for example valleys and mountains, elevated roads, and in selected cities 3D landmarks and 3D buildings are also displayed.

You can use digital maps interactively: you can zoom in and out (increase or decrease the scale), you can tilt them up and down, and turn them left and right. In GPS-supported navigation, digital maps facilitate route planning.

North-up map orientation

In North-up mode the map is rotated so its top always faces North. This is the orientation in 2D map view mode and in Overview mode. See also: Track-up map orientation.

65

Overview mode

You can instruct the product to automatically switch to Overview mode if the next route event is in a distance. In Overview mode the map is shown in 2D but scaled down to a predefined zoom level.

When you approach the next route event, the previous 2D or 3D map view returns automatically.

Route

A series of destinations to be reached one after the other. A simple route contains one start point and only one destination. Multi-point routes contain one or more via points (intermediate destinations).

The last route point is the final destination and the route is cut into different legs (from one destination to the next).

Scheme

The product comes with different colour schemes for the map for daytime or night use. Schemes are custom graphic settings for the map and they can have different colours for streets, blocks or surface waters in 2D and 3D modes, and they display shades or shadows in different ways in 3D mode.

One daytime scheme and one night scheme is always selected.

The product uses them when it switches from day to night and back.

Track-up map orientation

In Track-up mode the map is rotated so its top always points in the current driving direction. This is the default orientation in 3D map view mode. See also: North-up map orientation.

66

6 End User Licence Agreement

1 The contracting parties

1.1 This Agreement has been entered into by and between Nav N Go Kft. (registered seat: 23 Bérc utca, H-1016 Budapest, Hungary; Company reg.no.: 01-09-891838) as Licensor (hereinafter: Licensor) and You as the User (hereinafter: User; the User and the Licensor jointly referred to as: Parties) in subject of the use of the software product specified in this Agreement.

2 Conclusion of the Agreement

2.1 The Parties hereby acknowledge that this Agreement shall be concluded by implicit conduct of the

Parties without signing the Agreement.

2.2 The User hereby acknowledges that following the lawful acquisition of the software product constituting the object of this Agreement (Section 4), any degree of use, installation into a computer or other hardware, installation of such hardware into a vehicle, pressing of the “Accept” button displayed by the software during installation or use (hereinafter referred to as Use) shall mean that the User has accepted the terms and conditions of this Agreement as legally binding.

2.3 This Agreement shall by no means authorise use of the software product by those persons having unlawfully acquired the software product or having unlawfully installed it on a computer or in a vehicle.

3 Relevant laws and regulations

3.1 To all issues not regulated by this Agreement, the laws of the Republic of Hungary, with specific reference to Act IV of 1959 on the Civil Code and to Act LXXVI of 1999 on Copyrights shall apply.

3.2 The original language version of this Agreement is the Hungarian version. This Agreement has versions in other languages as well. In case of dispute the Hungarian version shall prevail.

4 Object of the Agreement

4.1 The object of this Agreement shall be the navigation guidance software product of Licensor

(hereinafter referred to as the Software Product).

4.2 The Software Product shall include the operating computer program, its complete documentation, the map database pertaining thereto and any third-party content and services accessible through the

Software Product (hereinafter: Database).

4.3 Any form of display, storage, coding, including printed, electronic or graphic display, storage, source or object code, or any other as yet undefined form of display, storage, or coding, or any medium thereof shall be deemed parts of the Software Product.

4.4 Error corrections, additions, updates used by the User following the conclusion of this Agreement shall also be deemed parts of the Software Product.

5 Rights under copyright

5.1 Unless otherwise provided by law or contractual provisions, the Licensor is the sole and exclusive owner of all material copyrights vested in the Software Product.

5.2 Copyrights extend to the whole Software Product and to its parts separately as well.

5.3 The owner(s) of the copyrights of the Database forming part of the Software Product is (are) the natural person(s) or corporate entity(ies) listed in the Appendix to this Agreement or in the “About” menu item of the operating computer programme (hereinafter referred to as Database Owner). The user's manual of the Software Product includes the name of the menu option where all the owners of the Database items are listed. The Licensor hereby states that it has obtained sufficient usage and representation rights from the Database owners in order to utilise the Database, to offer it for utilisation and to transfer it for utilisation as set forth in this Agreement.

5.4 Pursuant to this Agreement, all rights vested in the Software Product shall remain in the ownership of the Licensor, except for those to which the User is entitled under law or by virtue of this

Agreement.

6 Rights of the User

6.1 The User is entitled to install the Software Product into one hardware device (desktop, handheld, portable computer, navigation device), and to run and use one copy of the Software Product or a preinstalled copy of the Software Product thereon.

67

6.2 The User is entitled to make one backup copy of the Software Product. However, if the Software

Product operates after installation without the use of the original media copy, then the original media copy shall be deemed to be a backup copy. In all other cases, the User is only entitled to use the backup copy if the original media copy of the Software Product has been ascertainably and unequivocally rendered unsuitable for its lawful and intended use.

7 Limitations of use

7.1 The User is not entitled

7.1.1 to duplicate the Software Product (to make a copy thereof);

7.1.2 to lease, rent or lend it or to transfer it to a third person for any reason;

7.1.3 to translate the Software Product (including translation (compilation) to other programming languages);

7.1.4 to decompile the Software Product;

7.1.5 to evade the protection of the Software Product or to modify, circumvent or obviate such protection through technological or by any other means;

7.1.6 to modify, extend, transform the Software Product (in whole or in part), to separate it into parts, combine it with other products, install it in other products, utilise it in other products, not even for the purpose of achieving interoperability with other devices;

7.1.7 apart from using the computer program, to obtain information from the Database as a part of the

Software Product, to decompile the Database, to use, copy, modify, extend, transform the Database in whole or in part or the group of data stored therein, or to install it in other products or otherwise, utilise it in other products or to transfer it, not even with the aim of achieving interoperability with other products.

7.2 The User may only use the contents available through the Software Product and provided by third parties and the data received through the services provided by third parties (including but not limited to the traffic data received from the RDS TMC traffic information service) for his/her own personal benefit and at his/her own risk. It is strictly prohibited to store, to transfer or to distribute these data or contents or to disclose them in full or in part to the public in any format or to download them from the product.

8 No warranty or limitation of responsibility

8.1 The Licensor hereby informs the User that although the greatest care was taken in producing the

Software Product, given the nature of the Software Product and its technical limitations, the Licensor does not provide a warranty for the Software Product being completely error-free, and the Licensor is not bound by any contractual obligation whereby the Software Product obtained by the User should be completely error-free.

8.2 The Licensor does not warrant that the Software Product is suitable for any purpose defined either by the Licensor or the User, and does not warrant that the Software Product is capable of interoperating with any other system, device or product (e.g. software or hardware).

8.3 The Licensor does not assume any responsibility for damages incurred due to an error in the

Software Product (including errors of the computer program, the documentation and the Database).

8.4 The Licensor does not assume any responsibility for damages incurred due to the Software

Product not being applicable for any defined purpose, or due to the error or incompatibility of the

Software Product with any other system, device or product (e.g. software or hardware).

8.5 The Licensor also draws the attention of the User to the fact that, when using the Software

Product in any form of vehicle, observing the traffic regulations and rules (e.g. use of obligatory and/or reasonable and suitable security measures, proper and generally expected care and attention in the given situation, and special care and attention required due to the use of the Software Product) is the exclusive responsibility of the User. The Licensor shall not assume any responsibility for any damages occurred in relation to use of the Software Product in a motor vehicle.

8.6 By concluding the Agreement, the User shall, in particular, acknowledge the information stated in

Section 8 above.

9 Sanctions

68

9.1 The Licensor hereby informs the User that, if the Licensor finds its rights under the Copyright Act to be breached, the Licensor may

9.1.1 seek judicial recognition of this breach;

9.1.2 demand that the breach cease and order the person in breach to refrain from continuing such actions;

9.1.3 demand that the person under breach give proper compensation (even by way of publicity at the expense of the person in breach);

9.1.4 claim the return of the increase of assets due to the breach;

9.1.5 demand the cease of the wrongful action and, demand restitution to its state before the breach was committed at the expense of the person in breach, and may demand the destruction of instruments and materials used to commit the breach as well as of the products created by the breach;

9.1.6 claim for damages.

9.2 The Licensor hereby also informs the User that the breach of copyrights and related rights is a crime under Act IV of 1978 on the Hungarian Criminal Code, which may be sentenced of two years in prison in basic cases and up to eight years in prison in aggravated cases.

9.3 Contents and services provided by third parties

The Licensor hereby excludes any liability of its own for the Database in the Software Product and for any content or service provided by a third party by using the Database. The Licensor does not warrant the quality, suitability, accuracy, fitness for a specific purpose or territorial coverage of the product or service or the availability of the service, and it specifically excludes any liability for the suspension of the service, and any damage arising in relation to the service or for complete cancellation of the service.

The relevant information and data in connection with the contents and services provided by third parties are available at www.navngo.com. The User hereby acknowledges that the contents and services provided by third parties may only be used at the risk of the User and for the personal benefit of the User.

9.4 Contents and services provided by the Licensor or an agent of the Licensor

The Licensor or a contractual partner may offer various products and services to the User through www.naviextras.com. The User may only use these services when the User has read and understood the relevant end user licence agreement(s) at www.naviextras.com and the User is obliged to use the services in line with the terms and conditions thereof.

9.5 The parties hereby agree that - depending on the nature of the dispute - either the Pest Central

District Court (Pesti Központi Kerületi Bíróság) or the Metropolitan Court of Budapest (Fővárosi

Bíróság) will have exclusive jurisdiction to rule on any disputes arising in connection with this

Agreement.

69

P/N:127075003025

Caliber RDD570BT Owner Manual

GPS NAVIGATION SYSTEM

iGO NAVIGATION SOFTWARE MANUAL

Table of contents

1 Warnings and Safety information

2 Getting started with the product

2.1 Buttons and other controls on the screen

2.2 Using the map

2.3 The product concepts

2.3.2.1 Current GPS position and Lock-on-Road

2.3.2.2 Returning to normal navigation

2.3.2.3 Selected location (Cursor)

2.3.2.4 Original position in the Cursor menu

3 Navigating with the product

3.1 Selecting the destination of a route

3.1.2.1 Entering an address (Europe)

3.1.2.2 Entering an address if house numbering is restarted

3.1.2.3 Entering an address without knowing the district/suburb

3.1.2.4 Selecting an intersection as the destination

3.1.2.5 Selecting a city centre as the destination

3.1.2.6 Entering an address with a postal code

3.1.2.7 Tips on entering addresses quickly

3.2 Creating a multi-point route (inserting a via point)

3.3 Creating a multi-point route (appending a new destination)

3.4 Editing the route

3.5 Watching the simulation of the route

3.6 Pausing the active route

3.7 Deleting the next via point from the route

3.8 Deleting the active route

3.9 Saving a route

3.10 Loading a saved route

4 Reference Guide

4.1 Map screen

4.1.1.1 GPS position quality indicator

4.1.1.2 Status indicator strip

4.1.1.3 Next two route events (Turn Preview fields)

4.1.2.1 Streets and roads

4.1.2.2 3D object types

4.1.2.3 Elements of the active route

4.1.7.1 Trip Computer screen

4.2 Find menu

4.3 Route menu

4.4 Manage menu

4.5 Settings menu

5 Glossary

6 End User Licence Agreement

Related manuals

Caliber

RDD570BT

iGo

8

Boss Audio Systems

PNV9680-GPS

iGo

Primo Navigation - Macrom Mobile Multimedia

ZENEC

ZE-NC4612 Mercedes

ZENEC

ZENEC GPS NAVIGATION SYSTEM

ZENEC

Z-E5514M Seat

NAV N GO

iGO primo

Alpine

INE-W928R

ZENEC

ZE-NC4612

Alpine INE-W

INE-W928R

Alpine INE-W

INE-W970BT

Table of contents