Extensis 6 Universal Type Server Server Administration Guide
ಜಾಹಿರಾತು
ಜಾಹಿರಾತು
Copyright © 2008–2015 Celartem, Inc., doing business as Extensis. This document and the software described in it are copyrighted with all rights reserved. This document or the software described may not be copied, in whole or part, without the written consent of Extensis, except in the normal use of the software, or to make a backup copy of the software. This exception does not allow copies to be made for others.
Licensed under U.S. patents.
Extensis is a registered trademark of Celartem, Inc. The Extensis logos, Extensis Portfolio, Font Sense, Font
Vault, FontLink, QuickComp, QuickFind, QuickMatch, QuickType, Suitcase, Suitcase Attaché, TurboSync,
Universal Type, Universal Type Client, and Universal Type Core are trademarks of Extensis. Portfolio Flow,
Portfolio NetPublish, Suitcase Fusion, Type Server, and Universal Type Server are registered trademarks of
Extensis. Celartem, Celartem, Inc., and the Celartem logo are trademarks of Celartem, Inc. Adobe, Acrobat,
Creative Cloud, Creative Suite, Illustrator, InCopy, InDesign, Photoshop, PostScript, Typekit and XMP are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Apple, Bonjour, the Bonjour logo, Finder, iBooks, iPhone, Mac, the Mac logo, Mac OS, OS X,
QuickTime, the QuickTime logo, Safari, and TrueType are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. Microsoft, Excel, Internet Explorer, PowerPoint, SQL
Server, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries. Intel, Intel Core, and Xeon are trademarks of Intel Corporation in the U.S.
and/or other countries. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Google,
Android, and Google Play are trademarks of Google Inc. Apache Tika, Apache Tomcat and Tomcat are trademarks of the Apache Software Foundation. Quark, QuarkXPress, XTensions, QuarkXTensions and other
Quark related marks which Quark may adopt from time to time are trademarks or registered trademarks of
Quark, Inc. and its affiliates in the U.S. and/or other countries. Elasticsearch is a trademark of Elasticsearch
BV, registered in the U.S. and in other countries. All other trademarks are the property of their respective owners.
Universal Type Server 6.0.0 • Dec 14 2015, 11:17 AM
Contents
Welcome to Universal Type Server
About the Server Administration Guide
Installation Overview
Installing Universal Type Server
Universal Type Server Serial Numbers
Uninstalling Universal Type Server
Upgrading From a Previous Version
Server Status
Opening the Server Administration application
Automatically Starting the Server
Placing the Server in Standby Mode
Stopping, Starting, and Restarting the Server
Client Connections
Datastore
Backing Up and Restoring
Client Administration
Universal Type Client System Requirements
The Universal Type Client Cache
Enterprise Features
Configuring Automatic Failover Services
9
5
1
20
21
24
26
30
Modules
Command Line Administration Tool
Viewing Server Settings with the Command Line Tool
Specifying a Username and Password
Contacting Extensis
Technical Support
Index
68
69
71
46
53
Welcome to Universal Type Server
Universal Type Server® is the next generation of workgroup font management software. Written for the latest operating systems, this cross-platform system combines the power, speed, and control that administrators need with the seamless font delivery and elegant interface that users expect.
Type Server® provides centralized control, consistency, and compliance for all levels of font management— administrators as well as client users. Administrators can rest assured that the appropriate fonts are available to the client when they need them, and rogue fonts are kept out of the workflow. Meanwhile, users are certain that they are using the correct, approved fonts for their projects by using the Universal Type Client™.
If you have just installed Universal Type Server and want to get going quickly, you should do these things:
Log in to the Server Administration application.
1. Open a new browser tab or window.
2. Enter the address of your Type Server, followed by the port number for the Server Administration application. By default, this port is 18081.
Example: http://127.0.0.1:18081
3. Log in using the account name administrator and password password.
Enter your license numbers.
1. Click Licenses in the list on the left.
2. Enter your serial number and click [
Add Serial Number
]
.
3. If you have a Core Client license, enter that serial number and click [
Add Serial Number
]
.
For further configuration steps, see Installation Overview on page 5.
After you configure your server, you should change the administrator account password. Do this in the User
Management application.
1. Open a new browser window or tab.
2. Enter the address of your Type Server, followed by the port number for the User Management application. By default, this port is 8080.
Example: http://127.0.0.1:8080
3. Log in using the administrator account credentials listed above.
4. In the Workgroups pane, click All Users.
5. In the Users pane, select the Administrator user account.
6. In the Details pane, click the Account tab and enter a new password in the Password field, then enter it again in the Confirm Password field.
Write your new password down; if you forget it, you will need to contact Extensis Technical Support for assistance in resetting the password.
7. Click [
Save
]
.
For details about using the User Management application, see the Help system in the application.
About the Server Administration Guide
This Server Administration guide provides instructions for installing and configuring the server, as well as general server management information.
Universal Type Server is administered through three primary applications: the Server Administration application, the User Management application, and the Universal Type Client. In addition, Enterprise installations have access to the Universal Type Core Client for users that do not have changing font needs.
- 1 -
For detailed instructions about configuring roles, workgroups and users, please see the User Management
Guide, or the help system available within the application.
All management of the physical font files such as adding fonts to the server is accomplished in the Universal
Type Client. Other administrative functions such as running license reports are also performed from the Type
Client. For information about these features as well as all other client operations, please see the Universal
Type Client User Guide or choose Help > Universal Type Client Help.
What’s New
New in 6.0
Universal Type Server
l
New report analytics engine that will help server administrators know everything about their font l l environment at their fingertips
Configurable server memory management
Support for OS X El Capitan
Universal Type Client
l
Auto-activation plug-in for Adobe After Effects
User Management
l
Enhanced, extensible reporting module
Recent updates
Universal Type Server
l
FontLink for Adobe® InDesign® Server allows InDesign Server to connect to your Universal Type Server l l l l to include managed fonts in your automated workflow.
TurboSync™: Fonts and metadata replicate to clients up to 27 times faster.
Failover configuration: Enterprise users can set up a second Universal Type Server to ensure maximum up-time with minimum disruption.
External SQL database: Enterprise users can add a high-performance database for user and workgroup maintenance and font usage tracking.
Fully 64-bit native for improved performance and better system resource utilization.
- 2 -
Universal Type Client
l
Extensis Font Panel: The Extensis Font Panel allows you to access all of your workgroups directly in l l l l l l l l
Adobe InDesign, Illustrator, and Photoshop CS6 and later.
“My Fonts” Workgroup: Users can now see the fonts in all their workgroups in one place.
Font Favorites: Mark fonts as favorites and easily find them when you need them. Use them to search fonts and create smart sets.
Fontspiration: The Details Panel includes the new Fontspiration tab. Fontspiration displays examples of
WebINK fonts designed to inspire you to seek new and unique ways to use typography in your own projects. Click an example to view that example in your Web browser, and from there follow
Fontspiration and view the thousands of typography examples gleaned from around the Web.
QuarkXPress 10: Universal Type Client includes an auto-activation plug-in for QuarkXPress 10 and
10.1, and can also clean font caches for the Macintosh version.
QuickComp: QuickComp is a new Preview option that displays your font choices used in a variety of document layouts. Multiple templates are available that mimic brochures, newsletters, and other common design projects.
Details Panel: The Details Panel has been enlarged and moved from the bottom left to the right side of the main window. It displays more details about anything you select in the Workgroups pane, provides shortcuts for QuickFind searches using many popular search criteria, and allows you to directly edit some properties.
Color Previews: You can now set the font and background colors used in the Previews pane. Test color combinations, use them in floating previews, and grab a Font Snapshot.
Support for Adobe Creative Cloud apps and Typekit fonts.
User Management
l
Full Administrator users can now access the User Management application using their standard LDAP l l l credentials.
Compliance model: Universal Type Server uses a “per-machine” licensing model, similar to licenses purchased from most type foundries.
Enfocement options: Enterprise users can choose between strict enforcement, in which fonts are not allowed to be activated beyond the limits of your licenses, or notification, in which you receive an alert whenever a font is used beyond the number of available licenses.
Map Active Directory groups directly to Type Server workgroups.
System Requirements
For the most up-to-date information about the latest release of Universal Type Server, please visit the
Product Support page (
http://www.extensis.com/support/product-support/universal-type-server-
6/
).
Macintosh Server
l l l l
OS X® v10.10 and 10.11
2.0 GHz or faster processor
2 GB RAM
2 GB available hard drive space for application files, plus additional space for fonts
- 3 -
Windows Server
l l l l
Windows® Server 2012 or Windows Server 2012 R2
2.0 GHz or faster multi-core processor
2 GB RAM
2 GB available hard drive space for application files, plus additional space for fonts
Enterprise Edition Database Requirements
Enterprise Edition users have the option of utilizing one of these external databases. Use of an external database is required with a proxy failover configuration.
l l
MySQL 5.5 or newer (Macintosh or Windows)
Microsoft SQL Server 2012 or 2014 (Windows)
Macintosh Universal Type Client
l l l l l
OS X v10.9 through 10.11
2.0 GHz or faster processor
1 GB available hard drive space for application files, plus additional space for fonts
100 Mbit/s or faster network connection
An Internet connection and Safari® 7 or later or the current release of Firefox® or Chrome™ to view
Help
Windows Universal Type Client
l l l l l
Windows 7, Windows 8.1, or Windows 10
2.0 GHz or faster processor
1 GB available hard drive space for application files, plus additional space for fonts
100 Mbit/s or faster network connection
An Internet connection and Internet Explorer® 10, Microsoft Edge, or the current release of Firefox or
Chrome to view Help
You need to have Internet Explorer installed in order for QuickComp to work properly. It does not need to be your default browser.
Server Administration and User Management
Requirements for any computers that will be used for Server Administration or User Management. These applications can be run remotely.
l
Internet Explorer 10 or later or Microsoft Edge (for administering the server from Windows), Safari 7 or l l later (for administering the server from a Macintosh), or the current release of Firefox 15 or Chrome.
An Internet connection and one of the above browsers to view Help.
The current release of Adobe Flash® Player.
Reports
Reports can be viewed from any supported desktop browser.
l l l l l
Internet Explorer 10 or later (for viewing reports from Windows 7 or later), or
Microsoft Edge (for viewing reports from Windows 10), or
Safari 9 or later (for viewing reports from OS X), or
The current release of Firefox, or
The current release of Chrome.
- 4 -
Installation Overview
The following is a general overview of the steps required to install and configure Universal Type Server.
1. Verify server system requirements.
Make sure your server meets or exceeds the specifications found at the Product Support page
(
http://www.extensis.com/support/product-support/universal-type-server-6/
).
2. Run the installer on the target server computer.
You can download the latest version of the installer from the Product Support page
(
http://www.extensis.com/support/product-support/universal-type-server-6/
). For detailed
installation instructions, see Installing Universal Type Server on the next page.
Note that you do not need to install the software on the server's boot partition.
3. Log in to the Server Administration application.
The Server Administration application is browser-based; it will start automatically when the
4. Enter your Universal Type Server serial number.
See Universal Type Server Serial Numbers on the next page.
5. Set the Bonjour Name (optional).
Bonjour makes it easy for users to find your Type Server. See Setting the Bonjour Name on page 18.
6. Check for and resolve port conflicts.
Universal Type Server requires several open ports for communication; if any of these are in use by
other software then you will need to change them. See Resolving Port Conflicts on page 13.
7. Set any desired server configuration options.
This could include: n
Defining a Backup Plan (see Defining a Backup Plan on page 24);
n n
Configuring Log Files (see Log Files on page 10);
Any other necessary server settings.
After installing the server, open the User Management application. From here, you can configure workgroups and roles, then add users. These topics are covered in the User Management Guide and help system.
- 5 -
Installing Universal Type Server
Before installation, ensure that your server meets all of the minimum system requirements.
Copy the installer onto the server’s hard disk, double-click to launch the installer and follow the instructions.
For any late-breaking changes to the product, see the Universal Type Server Release Notes. These notes can be accessed from the Product Support page (
http://www.extensis.com/support/productsupport/universal-type-server-6/
).
After the installer runs, the installation application starts your web browser and opens the Server
Administration application.
NOTE
You can administer the server using a web browser on a remote computer.
Enter the server’s IP Address into your browser’s address field followed by a colon and the port number 18081. If this port is already in use on your server, a random port is assigned. To obtain the port number, use the command line
tool; see Viewing Server Settings with the Command Line Tool on page 53.
In the Server Administration application, log in using the default Server Administrator username and password:
Server Administrator username: administrator
Server Administrator password: password
You should change the password in the User Management application before adding any other users to the
Type Server.
Universal Type Server Serial Numbers
Universal Type Server is licensed on a concurrent user model: your license allows a certain number of users to connect at the same time (concurrently).
To begin using Universal Type Server, you must first enter your product’s serial numbers using the Server
Administration application.
Note: Your serial numbers are listed in your product receipt email and are also available by logging in to your account at the Extensis website (
https://secure.extensis.com/loginpage
).
To serialize the server:
1. Log in to the Server Administration application.
2. Click Licenses.
3. Enter the Client serial number into the field and click [
Add Serial Number
]
.
4. If you have a license for Type Core Clients, enter that serial number and click [
Add Serial Number
]
.
5. If you have an Enterprise license, enter that serial number and click [
Add Serial Number
]
.
Modules
Universal Type Server allows you to extend functionality with add-in Modules.
Typically, you will need to license your server and install the module on the Universal Type Server system before you can enter the license for the module.
See the details for your specific module for complete installation and licensing instructions.
- 6 -
Uninstalling Universal Type Server
Removing Universal Type Server removes all of the Type Server application files, but leaves your font repository and any backup files on the server.
To remove the Universal Type Server application on Mac OS X:
1. In the Finder, navigate to Applications/Extensis/Universal Type
Server/applications/.
2. Double-click the Uninstall Universal Type Server application icon and follow the instructions.
3. To remove the font repository and backup files from the default install location, move all files in the
Applications/Universal Type Server/ folder to the Trash.
To remove the Universal Type Server application on Windows Server 2012:
1. Choose Start > Control Panel.
2. Click Programs, then click Programs and Features.
3. Select Universal Type Server.
4. Click [
Uninstall
]
.
5. To remove the font repository and backup files from the default installation location, delete all files from the directory Program Files/Extensis/Universal Type Server/.
NOTE
Your font repository and backup files may be in a custom location. You can delete these files if you no longer need them.
Upgrading From a Previous Version
IMPORTANT l l
Please run a complete backup before attempting your upgrade.
Users of Universal Type Server 5 can upgrade directly to version 6. Users of earlier versions must upgrade to version 5 first.
Universal Type Server downloads are available from the Extensis
website (
http://www.extensis.com/support/productsupport/universal-type-server-5/
).
The following procedure is appropriate for users who are currently using the embedded Universal Type Server database. If you are upgrading to an external SQL database, read the external database configuration
instructions for Converting Between Database Types on page 35.
Create a backup file
Before you begin the upgrade process, it is essential that you create a backup file of your current installation.
Newer versions of Universal Type Server use an upgraded database, so if you ever want to downgrade Type
Server to a previous version, this backup is required to complete the process.
Also, if you are moving to an external database, this backup file is used during the upgrade process.
- 7 -
To backup your current Universal Type Server to your current backup location:
1. Open your web browser and start the Server Administration application.
2. Under Datastore on the left, click Backups.
3. Note your current backup location, and click [
Backup now
]
.
Install Universal Type Server
The Universal Type Server installer automatically removes your previously installed server, while keeping all of your fonts, users and data intact.
1. Copy the new Universal Type Server installer to your server and double-click to run.
2. Follow the prompts to install the server upgrade.
NOTES l l
During the upgrade process, all users will be disconnected and the server will be placed in Standby mode. After upgrading the server, change the
Access State to Normal. Users will need to log in to the Type Server again.
The database upgrade might take some time to finish. When complete, the server automatically starts and is ready for users to connect.
After the installation is complete, serialize the server with your serial number.
You are now ready to configure an external database and connect to Directory Services as required.
Deploy new Universal Type Client
The new version of Universal Type Server includes a new version of Universal Type Client. If you have deployed Universal Type Client 5, you can allow your users to continue with this version. However, many new features and performance enhancements will not be available if you do not upgrade users to the latest client. This is especially true if you are going to rely on Type Server to report on font activity or enforce font license compliance: older Type Clients do not provide the information that Type Server requires for these features.
If you are still using Universal Type Client 4, you must update users to a newer version; we recommend updating to the latest version of Universal Type Client 6.
You do not need to upgrade users all at once, but we strongly recommend that you upgrade users to the latest Universal Type Client at your earliest convenience.
- 8 -
Server Status
Opening the Server Administration application
The Server Administration application is where the Server Administrator is able to: l l l l l l l l start, stop, and pause the server; change the server’s Bonjour name; examine and change port settings; manage memory allocation; view connected clients; configure and restore backups; locate, move, or create a new datastore; manage server serial numbers.
To log in to the Server Administration application:
1. Open a supported web browser.
Recent versions of most popular browsers with the latest Adobe Flash plug-in are supported.
2. In the address field, enter your server IP address followed by a colon and the port number. The default server administration port is 18081 (also called the Web Admin port). For example: http://192.168.0.1:18081 or http://localhost:18081.
3. Enter the administration username and password. The default Server Administrator username and password are administrator and password.
NOTES l l l
The Password field is case-sensitive, but the Username field is not.
It is very important to change the Server Administrator password as soon after installation as possible.
The default location of the User Management application is the same IP address, with the port number 8080. For example: http://localhost:8080
- 9 -
Log Files
The Universal Type Server creates log files to help identify and troubleshoot potential issues with the server.
These files include records of the following transactions, as well as other information: l l l l l l l l l l
User login and logout
The IP addresses of connected users
The addition and deletion of workgroups
The addition and deletion of users
Server startup
Server shut down
Database backup, restoration, and changes to backup settings
Database deletion
Changes in database location
Changes in log file location
On Windows, the default location for log files is:
Program Files\Extensis\Universal Type Server\Logs
On Mac OS X, the default location for log files is:
Applications/Extensis/Universal Type Server/Logs
These are the logs that are important for server administration:
Log file name Purpose extensis.admin.log
Contains all log messages displayed in the Server Activity window of the Server
Administration Status page.
extensis.server.log This is the main server log. Changing the server logging level affects what is recorded in this file.
server.log
boot.log
Contains very verbose logging of server activity.
This log is created by JBoss upon startup. If JBoss is having problems at launch time, this file can provide useful diagnostic information.
Changing the Logging Level
The contents of the main Universal Type Server log file, extensis.server.log, can be updated based on how much detail that you need.
The logging levels available are:
ERROR
WARN
INFO
Log Level What Gets Logged
Displays only error messages.
Displays only error and warning messages.
This is the default logging level and includes a wide variety of information about server activity.
This level is recommended for most installations.
DEBUG This level of logging includes very detailed information about your server and can result in very large log files. Itis not recommended unless specifically requested by your support representative.
- 10 -
To change the server logging level:
2. Click Logging.
3. Choose a new level from the Logging level drop-down menu, then click [
Update Server
]
.
Changing the Log Location
Administrators can change the location where the main Universal Type Server log file, extensis.server.log, is placed.
To change the log file location:
2. Click Logging.
3. Enter a new log location into the Logging directory field. The default location is in the logs folder of the Universal Type Server application folder. The following are examples of new paths:
Windows: C:\Universal Type Server\logs
Macintosh: /Volumes/Macintosh HD/logs
NOTE
The new logging directory folder must already exist on the disk. Creating log files on a network location is not supported. Enter the full path, do not use relative paths, and include a drive letter on Windows.
4. Click [
Update server
]
.
A new extensis.server.log file is created in the new location. The log file in the previous location is not removed, but it is no longer updated.
All other Universal Type Server log files always remain in the default location, and the location cannot be changed. If removed, they are automatically recreated by the server.
Changing Log Backups
The extensis.server.log file is backed up on a daily basis at 12:15 a.m. to your designated logging location. Log backup files are named with the log file name followed by the date of the backup, and they can be opened with any text editor or word processor.
Since these files can become very large, you may not want to keep a significant number of them on the server. By default, the server keeps the 10 most recent log files.
To update the number of log backups to keep:
2. Click Logging.
3. Enter the number of backups to keep in the Retained server logs field and click [
Update server
]
.
- 11 -
Ports
The Universal Type Server requires a number of ports on your server. These ports are used for client connection, server administration as well as internal server communication.
Port
UTS HTTP / Web Service
UTS HTTPS / Web Service
UTS Webservice
UTS CLI Port
Web Admin HTTP
Web Admin CLI Port
RMI Port
Default
8080
8443
8083
9999
18081
19999
4447
All ports used with Universal Type Server must not conflict with other applications on the server.
External ports must be opened in the host system’s firewall and operating system. The process of opening ports varies by operating system. Please refer to the Mac OS X Server and Microsoft Windows documentation for more information.
Ports for External Communication
The Universal Type Server requires three ports to be open for server administration and client connection.
l l l
UTS HTTP/Web Service port: Default port number 8080
UTS HTTPS/Web Service port: Default port number 8443
Web Admin port: Default port number 18081
These ports are used on a regular basis and are listed on the Server Administration Ports page.
IMPORTANT
If you are configuring a Primary and Secondary server in a failover configuration, be sure the ports are set to the same values on both systems.
See Configuring Automatic Failover Services on page 37 for more
information.
UTS HTTP/Web Service port
This is the port where users connect to your server, as well as the port where administrators open the User
Management application. The default port setting is 8080.
Client connections
Clients require the following information for server login: l l l
The server IP address, DNS name or Bonjour name.
The UTS HTTP / Web Service port number. If using a Bonjour name, a port is not required.
Client account name and password.
User Management
To connect to the User Management application, enter the server IP address in the address field of any supported browser followed by a colon and the port number.
For example: http://123.45.34.12:8080/
- 12 -
UTS HTTPS/Web Service port
When the secure connection option is enabled, administrators connect to the User Management application through the UTS HTTPS/Web Service Port.
The default setting for this port is 8443.
The port for secure connections is only used to connect with the User Management application. With secure connections enabled, when administrators attempt to connect with the UTS HTTP/Web Service port, they are automatically redirected to the UTS HTTPS/Web Service port.
For example, an administrator can enter http://123.45.34.12:8080 and be redirected to https://123.45.34.12:8443, or enter https://123.45.34.12:8443 directly.
Web Admin port
This port is used to open the Server Administration application. Enter the server IP address followed by a colon and the port number in the address field of a supported web browser. The default port setting is
18081.
Example: http://123.45.34.12:18081/
Ports for Internal Server Communication
A number of standard Java J2EE and web service ports must be reserved for the internal communication of
Universal Type Server.
It is possible that you may have other applications running or requiring Java on your server. Type Server runs a self-contained version of Java, so it is possible to run other Java and web service applications on the same computer, provided that you resolve any port conflicts.
To avoid conflicts, use the Ports page to assign new port numbers for Type Server.
The following ports are required for internal Universal Type Server communication:
Port Default
UTS Webservice 8083
UTS CLI Port
RMI Port
9999
4447
Resolving Port Conflicts
The Universal Type Server installer checks to see if the default server administration port 18081 (Web Admin
Port) is bound to any other application. If it is already taken, then another port is chosen randomly before the Server Administration application starts.
All other ports listed on the Server Administration’s Ports page are required for proper operation of the server.
Type Server checks for any port conflicts and lists them in the extensis.admin.log. The server uses standard JBoss ports, so if your server has other applications that are built using this technology, you may need to change the default Type Server port numbers.
- 13 -
To update port numbers:
2. Under Settings on the left, click Ports.
3. For each port that requires a new port number, enter a new port number or click [
Find port
]
to locate an open port.
4. Click [
Update Ports
]
.
5. Restart the server (see Stopping, Starting, and Restarting the Server on page 17).
Opening Ports in the Windows Firewall
To open ports for server administration and client connection:
1. Open the Windows Control Panel.
2. Double click the Windows Firewall icon.
3. Click the Change Settings option.
4. If prompted, click [
Continue
]
to allow this action.
5. Click the Exceptions tab of the Windows Firewall Settings dialog, then click [
Add Port
]
.
6. In the Add A Port dialog, enter the following information and click [
OK
]
.
n n n
Name: Universal Type Server User Management
Port: 8080
Protocol: TCP
7. Click [
Add Port
]
again to add a second port. Enter the following information and click [
OK
]
.
n
Name: Universal Type Server System Administration n n
Port: 18081
Protocol: TCP
8. Click [
OK
]
to accept the new settings.
Security Concerns
The Universal Type Core communicates with the Type Server using HTTP through the JBoss HTTP port (see
Ports for External Communication on page 12).
All client and server login usernames are sent as clear text via HTTP. For security reasons, all associated passwords are encrypted and sent using the MD5 cryptographic hash function.
For additional security, Extensis recommends that the Type Server run behind a firewall using authentication
through the required external ports (see Ports for External Communication on page 12).
Implementing a Secure Connection
A secure connection provides encrypted communications between Universal Type Server and the computer that is used to administer the server.
A redirect to the secure connection port is not enabled by default. A secure connection can be enabled using the default, self-signed certificate, or with a custom security certificate for your organization.
NOTE
Enabling a secure connection will cause a slight performance degradation in the User Management application. This setting does not affect your client users in any way.
- 14 -
Enabling a secure connection requires the following steps:
1. Obtain a custom security certificate.
2. Edit the standalone.xml file with your custom security certificate password.
3. Enable the automatic redirect to the secure connection by editing the web.xml file.
Obtain a Security Certificate
Security certificates tell the web user that the secure connection is valid and can be trusted. Typically these certificates are issued by trusted organizations. If desired, obtain a security certificate for your organization.
Universal Type Server includes a default, self-signed security certificate. This certificate allows you to create a secure connection without obtaining your own custom certificate. Using the default certificate will cause your browser to display a number of security warnings when you open the User Management application.
These warnings indicate the nature of the self-signed certificate, but by using it you can still create a secure connection with the Type Server. All browsers allow you to record a security exception or to trust the selfsigned certificate. See your browser’s documentation for details.
If you choose to obtain a custom security certificate, you can obtain a one from Verisign
(
http://www.verisign.com/ssl/
), GoDaddy (
http://www.godaddy.com/ssl/ssl-certificates.aspx
), or other Certificate Authority.
After obtaining the certificate, rename the file to uts.keystore and use it to replace the default certificate in the following location on your server:
Windows: C:\Program Files\Extensis\Universal Type
Server\applications\jboss\standalone\configuration\uts.keystore
Macintosh: /Applications/Extensis/Universal Type
Server/applications/jboss/standalone/configuration/uts.keystore
- 15 -
Edit the standalone.xml file
Editing the standalone.xml file enables the secure connection by editing the security certificate name, password, and location.
To add the security certificate:
1. Open the standalone.xml file from the following location with a text editor such as Notepad or
TextEdit.
Windows: C:\Program Files\Extensis\Universal Type
Server\applications\jboss\standalone\configuration\standalone.xml
Macintosh:/Applications/Extensis/Universal Type
Server/applications/jboss/standalone/configuration/standalone.xml
2. To change the name and location of your security certificate, search for the certificate-keyfile value. Edit the value between the quote marks to match your security certificate file name. If you renamed your security certificate to the default name, uts.keystore, and placed it in the default location, you can leave this value as is.
For example, the default entry in standalone.xml looks like this: certificate-keyfile="${jboss.server.base.dir}/configuration/uts.keystore"
If you have moved the security certificate file, enter its complete path between the quote marks.
Windows example: certificate-key-file="C:\Users\me\certificates\my_uts_ cert.keystore"
Macintosh example: certificate-key-file="/Users/me/Documents/my_uts_ certificate.keystore"
3. To enter the password of your security certificate, search for the password entry. Edit the value between the quote marks to match your security certificate password.
password="uts_ssl"
4. Save and close the standalone.xml file.
Enable a Redirect to the Secure Port
Editing the web.xml file enables a redirect from the standard web service port (default port 8080) to the secure connection port (default port setting 8443).
To enable the redirect:
1. Open the file from the following location with a text editor such as Notepad or TextEdit.
Windows: C:\Program Files\Extensis\Universal Type
Server\applications\jboss\standalone\deployments\uts.ear\uts.war\WE
B-INF\web.xml
Macintosh: /Applications/Extensis/Universal Type
Server/applications/jboss/standalone/deployments/uts.ear/uts.war/WE
B-INF/web.xml
2. Use the search feature to locate the line that contains the transport-guarantee parameter.
Change the following line from:
<transport-guarantee>NONE</transport-guarantee> to:
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
3. Save and close the web.xml file.
4. You will need to restart your Universal Type Server for the change to take affect.
- 16 -
Automatically Starting the Server
If you need to restart the physical server, the Autostart preference must be enabled for the server to automatically launch and serve fonts to clients.
The Autostart preference is enabled by default, but may be disabled if desired depending upon your server configuration.
To enable the Autostart preference:
2. Click System.
3. Choose Autostart > Enabled.
4. Click [
Update server
]
.
If the Autostart preference is disabled, administrators are still able to connect to the Server Administration application to start the server.
Placing the Server in Standby Mode
Placing the server in standby mode prevents any non-administrative users from performing any actions that require communication with the Universal Type Server. The server runs normally for administrative users.
When in Standby Mode, all client users are not logged off, but are placed in offline mode. While in offline mode, users are only able to activate and preview files that are in their local cache. Font files that are not available for user are displayed in red in the Universal Type Client.
When performing datastore backups and restores, the Type Server automatically changes to standby mode before performing the required administrative task, and then changes back to normal mode when the task is complete.
To place the server in standby mode:
1. Notify users of your intention to place the server in standby mode.
2. Open your web browser and start the Server Administration application.
3. Click System.
4. Choose Access state > standby.
5. Click [
Update server
]
.
The server will be placed in standby mode.
6. Perform any necessary server maintenance.
7. Click System.
8. Choose Access state > normal.
9. Click [
Update server
]
.
The server resumes normal access and displays the Status page when complete.
Stopping, Starting, and Restarting the Server
If you need to stop, start, or restart Universal Type Server, use the Server Administration application. This ensures that all processes are properly shut down and restarted.
When you shut down the server, connected clients are automatically put in Offline mode. This means that client computers will only have access to fonts that are cached locally on their computer. Which fonts are cached depends mostly upon the font replication mode that is enabled for each user. See the User
Management Guide for more information.
- 17 -
Before you shut down or restart your Type Server, we recommend that you notify users so they can prepare to work offline.
To stop Universal Type Server:
1. Start your web browser and connect to the Server Administration application (see Opening the
Server Administration application on page 9).
2. Under Settings on the left, click System.
3. Choose Running state > stopped.
4. Click [
Update server
]
.
When the server has stopped, the Status page will be displayed.
To start the server:
1. Start your web browser and connect to the Server Administration application.
2. Click System again.
3. Choose Running state > started.
4. Click [
Update server
]
.
When the server has finished starting, the Status page will be displayed.
To restart the server:
Follow the steps above to stop the server, then follow the steps to start the server. Be sure the Status page shows the server has stopped before attempting to start it.
Starting automatically
If you need to restart the physical server hardware, you should enable the Autostart preference (see
serve fonts to clients. If this preference is disabled, you will need to start the Type Server manually.
Setting the Bonjour Name
Bonjour is a technology from Apple Inc. that enables users to easily locate Universal Type Server on the network. Bonjour technology is built into Mac OS X, and is installed by the Universal Type Client installer for clients using Microsoft Windows.
When users connect to the server, they only need to know the server’s Bonjour name, their username, and their password to connect.
To set the Universal Type Server Bonjour name:
2. Click System.
3. Enter a Bonjour Name into the field. If you have more than one Type Server, choose as specific a name as possible.
4. Click [
Update server
]
.
5. Restart the server (see Stopping, Starting, and Restarting the Server on the previous page).
- 18 -
To test the new Bonjour name:
1. Launch the Universal Type Client.
2. If the client is currently connected to a server, choose File > Server > Forget Connection.
3. In the Connect to Server dialog, choose Server > Browse Local Servers.
4. Select your new Bonjour name from the list and click [
OK
]
.
5. Enter your username and password and click [
Connect
]
.
Memory allocation
If you are using Universal Type Server with a large number of LDAP users or a large number of workgroups, you may find it necessary to increase the amount of memory available to the Type Server. This is especially important if your server logs have Java Heap Space errors.
To change the server memory allocation:
1. Click System.
2. Choose the desired memory allocation from the Memory Allocation pop-up menu.
Important: Select a size that is lower than the amount of physical memory in the server system. For example, if your server has 8GB of RAM, do not attempt to allocate more than 6GB to the Type
Server.
3. Click Update server.
The Universal Type Server will restart.
Locking Server Administration
The Server Administration application automatically logs you out after a period of inactivity. Sometimes you may want to continually monitor the server status, and not automatically be logged out. For example, you might want to keep the Status page displayed on a server room monitor.
Locking the status page does not prevent other users from accessing the Server Administration application from another computer.
To lock the Server Administration Status page:
2. In the Status area, click the Lock icon.
To unlock the server, click the lock icon and log in.
- 19 -
Client Connections
Viewing Connected Users
Administrators can view a high level list of connected users in the Users page of the Server Administration application. This list provides the login User Name, Full Name, IP Address, and Login Date.
You can sort the list of users by any field by clicking the sort icon at the top of each column.
If you are using both traditional Type Client and Core Client connections in your configuration, users can be filtered by client type. Choose: l l l
User Type > All to display both Type Client and Core Client conenctions.
User Type > Full to display only Type Client connections.
User Type > CoreClient to display only Core Client connections.
To update the number of connected users visible at a time, enter a new number in the Users per page field and click [
Update page size
]
.
For more complete user management, including adding and removing users, open the User Management application.
Forcing User Disconnection
In some instances, you may need to force the logout of a currently connected user.
For example, if you are currently using all of your license seats, you may need to force the logout of one user to allow another user to connect. In another instance, you may need to force the logout of a recently terminated employee. You would of course also want to delete the user account of any terminated employee using the User Management application.
To force user logout:
1. Open your web browser and start the Server Administration application.
2. Click Usersin the menu at the left.
3. Check the boxes for the users that you want to disconnect. To select all users on the current page, check the box at the top of the first column.
4. Click [
Force Logout Selected Users
]
.
When you force the logout of a user, it is the same as the user selecting Server > Forget Connection.
After forcing the logout of a user, the next time the client attempts to synchronize with the server the connection is terminated and all server fonts are removed from the client.
- 20 -
Datastore
Creating a New Datastore
WARNING
When you create a new datastore, your current datastore will be deleted. You may wish to back up your existing datastore and move it to a safe location
before you create a new one. For instructions, see Backing Up the
The datastore consists of two parts: the database and the vault. The database location is fixed (whether you are using a native database or a SQL-based external database), but the vault can be moved to a new location.
The default location for the vault depends on your operating system: l l
Windows: C:\Program Files\Extensis\Universal Type Server\data\vault
Mac OS X: /Applications/Extensis/Universal Type Server/data/vault
For details about specifying a new vault location, see Vault Location Requirements on the next page.
To create a new datastore:
1. Log in to the Server Admin application.
2. Click Move/New under Datastore in the navigation menu on the left.
3. Enter the full path where you want to create a new vault in the field labeled New repository
location.
Universal Type Server will create any folders that don’t already exist.
Note: The database component of the datastore is always in the same location, regardless of whether you are using the built-in database or a SQL-based solution.
4. Click [
New datastore
]
.
5. Click [
OK
]
to confirm.
The Type Server will go in to standby mode, then it will automatically start when the operation is complete.
After creating a new datastore, you will need to go through all of the standard configuration steps, including creating workgroups and users.
IMPORTANT
If you create a new vault on a network share, that share must be accessible in read/write mode to the account that your Type Server runs under. For
Universal Type Server installations on Windows, the share must be specified with a UNC path, and the Type Server must be running under a domain user account with full read/write access to the share. For Universal Type Server running on OS X, the share must be specified as a POSIX path.
- 21 -
Moving the Vault
The vault is the part of Universal Type Server's datastore that holds all the fonts hosted by your Universal
Type Server. Because it stores a copy of each unique font, your vault can become very large.
The vault is initially created on the same volume where you installed Universal Type Server. If you think that your vault will need more space, you can move it to a new drive.
Moving the vault can take several minutes, depending on how big it is. You should move it when users don't need to access your Universal Type Server.
Vault Location Requirements
The new location for the vault must: l l l l
Be specified by the full path to the vault folder (not a relative path such as ..\path_to_vault);
Always be accessible to the Universal Type Server;
Grant read/write access to the computer account under which Type Server runs;
Be specified by a UNC path (Windows) or a POSIX path (Mac OS X) if it is on a network volume.
You should use a folder dedicated to the vault, because Universal Type Server will create several folders inside it. We suggest naming the vault folder “vault.”
Be aware that if you locate your vault in a folder that others use, anyone that has access to that folder may inadvertently corrupt the vault’s contents.
WARNING l l
You should only move your vault to a network location if you are using a
failover configuration (see Configuring Automatic Failover Services on page 37).
You should not move your vault to a local volume that is removable (such as an external USB drive).
Windows vault path examples
C:\Users\jsmith\documents\vault\
D:\shared_files\font_vault\ (D: is a local drive)
\\NetworkFiles\Design\vault\ (NetworkFiles is the server name, Design is a shared volume on the server, and vault is the vault folder)
Mac vault path examples
/Users/jdoakes/font vault (Universal Type Server should be running under the jdoakes login account)
/Volumes/Marketing/misc/vault (Marketing is a shared network volume, misc is a folder on the volume, and vault is the vault folder)
If you are running Universal Type Server on Windows:
l
If you are using a network volume to store your vault, do not use a mapped drive path (such as l l
Z:\path_to_vault) as the path you enter in Universal Type Server. Instead, use the complete UNC path (such as \\remote_server\shared_volume_name\path_to_vault).
Universal Type Server must be running under a domain user account that has full read/write access to the network vault location.
If your vault is located on a Mac OS X system, be sure to enable Windows (SMB) sharing for the vault.
- 22 -
If you are running Universal Type Server on Mac OS X:
l l
If you are using a network volume to store your vault, enter the POSIX path to your vault (such as
/Volumes/shared_volume_name/path_to_vault) in Universal Type Server.
If you mount more than one network volume with the same name as the volume that your vault is on
(shared_volume_name in the example above), be aware that the order in which the volumes are mounted may make it impossible for Universal Type Server to find your vault. To be safe, only mount volumes with unique names. If you must mount network volumes that have identical names, be sure to always mount your vault’s volume first.
To move your vault to a new location:
1. Log in to the Server Admin application.
2. Click Move/New under Datastore in the navigation menu on the left.
3. Enter the full path where you want to move the vault in the field labeled New location for vault.
Universal Type Server will create any folders that don’t already exist.
4. Click [
Move vault
]
.
The Type Server will go in to standby mode, then it will automatically start when the operation is complete.
- 23 -
Backing Up and Restoring
Defining a Backup Plan
As you set up Universal Type Server, it is important to define an effective datastore backup plan. This ensures that, in cases of emergency, your datastore is safe and can be restored.
The Universal Type Server datastore contains all of the fonts, as well as all user, workgroup, and server data.
Backup files are rolled into a single, date-stamped .TAR file. TAR files are archive files like the ZIP files created by your operating system.
It is recommended that you back up your datastore at least once per week. Plan to store copies of the backup in an offsite location from time to time. This ensures that if anything happens to the local copies of the files, you can restore from the offsite backup.
For the highest level of data security, it is best to keep multiple backup files. Universal Type Server is able to automatically create and retain however many backup files that you need, and subsequently remove any out-of-date backups.
Backups can be performed manually, but it is much easier to define a schedule and allow Universal Type
Server to automatically create files.
IMPORTANT
Backups must be created in an existing folder location on the Universal Type
Server computer. Backing up the server to network locations, including NFSmounted or UNC accessible paths,
is not supported
.
In case of any hardware failure or other incident, a backup can be easily restored to a new server install location using the Server Administration application.
Backing Up the Datastore
While you can back up Universal Type Server’s data using other software, we recommend that you use the built-in backup utility. This allows you to quickly restore or replicate an entire Universal Type Server database, including all fonts and user information, on a new system if you need to.
You can back up the server manually or configure Universal Type Server to perform automatic backups at regular intervals.
To manually back up the datastore:
1. Open your web browser and start the Universal Type Server Administration application.
2. Under Datastore in the menu on the left, click Schedule backups.
3. Enter a local backup destination into the Backup destination field.
The default location for the datastore is the data\backups folder of the Universal Type Server application folder.
Enter the full path; do not use relative paths, and be sure to include a drive letter on Windows.
The following are examples of appropriate paths:
Windows: C:\Universal Type Server\backups
Macintosh: /Volumes/Macintosh HD/backups
4. Click [
Update server
]
.
5. Under Datastore in the menu on the left, click Backups.
6. Click [
Backup now
]
.
- 24 -
To configure automatic backups:
NOTE
For automatic backups, it is best to set backup times when most users are not connected to the server. When the server is performing a backup, users are not disconnected, but are unable to synchronize with the server until after the backup is complete.
1. Open your web browser and start the Universal Type Server Administration application.
2. Under Datastore in the menu on the left, click Schedule backups.
3. Enter a local backup destination into the Backup destination field.
The default location for the datastore is the data\backups folder of the Universal Type Server application folder.
Enter the full path; do not use relative paths, and include a drive letter on Windows.
The following are examples of appropriate new paths:
Windows: C:\Universal Type Server\backups
Macintosh: /Volumes/Macintosh HD/backups
4. Enter the number of backup files to retain in the Retained backups field.
For the highest level of data security, it is a good idea to keep multiple backups.
5. Choose the time and days for backing up that will cause the least amount of user disruption.
6. Click [
Update server
]
.
After setting automatic backups, be sure to make a note of the times when you should also be moving backup files off the server to a secure, offsite location.
Restoring a Backup
In the case of hardware failure or other issues, a backup datastore can be restored. The backup contains all fonts, users, workgroups, and all other settings to restore your datastore to the backed-up state.
WARNING
Restoring a backup overwrites your current datastore. All connected users are automatically logged out, and will need to reconnect.
To restore a backup:
1. Open your web browser and start the Server Administration application.
2. Under Datastore on the left, click Backups.
3. Enter the full path and filename of the backup file in the Restore field.
Enter the full path; do not use relative paths, and include a drive letter on Windows.
The following are examples of appropriate paths:
Windows: C:\Universal Type Server\backups\2008_02_18T10_00_00_156Z.tar
Macintosh: /Volumes/Macintosh HD/backups/2008_02_18T10_00_00_156Z.tar
4. Click [
Restore datastore
]
.
5. Click [
OK
]
to confirm the restore.
- 25 -
Client Administration
Most Universal Type Client information can be found in the Universal Type Client User Guide as well as the
Type Client help system.
It’s important to note that all font administration, including adding and removing fonts, is done directly in the Universal Type Client.
Universal Type Client System Requirements
For the most up-to-date information about the latest release of Universal Type Client, please visit the
Product Support page (
http://www.extensis.com/support/product-support/universal-type-server-
6/
).
Macintosh Universal Type Client
l l l l l
OS X v10.6.8 through 10.10
2.0 GHz or faster processor
300 MB available hard drive space, plus additional space for fonts
100 Mbit/s or faster network connection
An Internet connection and Safari® 5, Firefox® 7, or Chrome™ 14 or later to view Help
Windows Universal Type Client
l l l l l
Windows 7, Windows 8, or Windows 8.1
2.0 GHz or faster processor
300 MB available hard drive space, plus additional space for fonts
100 Mbit/s or faster network connection
An Internet connection and Internet Explorer® 8, Firefox 7, or Chrome 14 or later to view Help
You need to have Internet Explorer installed in order for QuickComp to work properly. It does not need to be your default browser.
The Universal Type Client Cache
Each client system stores fonts and other client data locally in a cache folder. This includes all necessary server fonts as well as items in client-based personal workgroups.
When a user chooses Server > Forget Connection, any font files cached in the Type Client cache are no longer available for use on that system.
If a user chooses Server > Go Offline, fonts are available depending on their font replication mode setting.
l
All: The user has access to all fonts in their workgroups.
l l
On-Demand Local Cache: The user has access to any fonts that they have previously used. Any fonts that they have ever previewed or activated reside in the cache.
On-Demand: The user has access to the fonts that are active on their system before going offline.
- 26 -
The Type Client cache consists of two components, the database and the type cache: l
The type cache is the storehouse for all fonts downloaded from the server. The cache’s structure varies l by platform. For the Mac OS X client, the UniversalType.typecache file is a bundle that contains all fonts. On Windows, font files are stored within a directory named cache.
UniversalType.db contains all of the database information, such as font and workgroup details and client permissions. It is stored within the UniversalType.typecache bundle.
WARNING
Deleting or moving any part of the client cache may render the application inoperable. Contact Extensis Technical Support before attempting to alter the client cache in any way.
The Type Client cache files are stored in the following locations:
Mac OS X: /Library/Extensis/UTC/<uid>/UniversalType.typecache/
The UserID (uid) is a unique number assigned by OS X to each user account. The first user account on the computer is 501, followed by 502, 503, and so on. To determine the uid for the current user, open a
Terminal window and enter the id command.
Windows 7, 8, 8.1, and 10: C:\Users\<username>\AppData\Local\Extensis\UTC\cache\
To open this directory on Windows 8, 8.1, or 10, press
WIN+X to open the system menu, click Search, type the environment variable %LOCALAPPDATA%, then press
ENTER
.
To open this directory on Windows 7, click the Start menu, type %LOCALAPPDATA% into the Search field, then press
ENTER
.
- 27 -
Disabling Other Font Managers
To ensure the proper operation of Universal Type Client, it is important to disable or uninstall any other font managers.
Just closing or quitting other font managers might not be sufficient. Many font mangers, including the
Universal Type Client, run an application in the background that manages font activation and deactivation.
These background applications must be disabled before running the Type Client. To do so, check for an application preference that tells the other application to open on startup or login and then restart your computer.
On Mac OS X, it is important to disable two preferences within the Font Book application. The following preferences affect system behavior and can interfere with Universal Type Client: l l
Automatic font activation: This option interferes with professional font mangers and does not allow for automatic font activation across all applications. The Universal Type Client still allows you to use plug-in based automatic activation for each supported application. This option is present in all versions of Font Book.
Alert me if system fonts change: When enabled, this option will automatically place “protected” fonts back into your system font folders even if you remove them. It also can prevent a professional font manager from effectively managing or overriding your system fonts. This option is only present in Font
Book versions includes with OS X 10.8 and earlier.
WARNING
Do not launch Font Book while using Universal Type Client. Remove it from the Dock if necessary.
The Universal Type Core
The Universal Type Core is a background application that runs on the client computer. This application handles all communication with the Type Server and makes it possible for the user to close the Universal
Type Client and still keep fonts active and automatically activate fonts. The Type Core handles all plug-in based auto-activation requests and automatically implements any updated permissions, workgroup changes, and all other changes upon synchronization with the server.
The Universal Type Core is started when the user logs in to their computer. You can stop the Type Core from the Universal Type Client preferences.
To stop the Type Core:
1. Start the Universal Type Client.
2. Choose Universal Type Client > Preferences (Mac) or Edit > Preferences (Windows).
3. Click the FMCore tab in the Preferences dialog.
4. Click [
Stop FMCore
]
.
5. When asked if you are sure, click [
Stop FMCore
]
.
When you stop the Universal Type Core, font management is disabled, and all active fonts are deactivated.
Generally, the only fonts that will be available for use on the computer will be the fonts protected by the operating system.
- 28 -
Client License Management
Universal Type Server uses a machine-based licensing model. The number of client connections allowed is encoded into your Type Server serial number.
You can see how many users are connected, the associated IP addresses, and unique computer identification in the Users panel in the Server Administration application. The Licenses panel displays your serial numbers, as well as the number of client connections allowed.
How client connections are counted
For environments where more than one user connects using the same computer, only one client license is consumed. This allows an environment that may have many users on a computer during the course of the day, such as educational institutions, to allow each user to connect, and even if each user does not choose the Forget Connection command at the end of their session, the computer itself only consumes one client license for the computer.
Conversely, if a user logs in to Universal Type Server from two separate computers, two client licenses are required. For example, in an environment where every user has both a Mac and a PC, a client license is required for each computer.
Automatic disconnection
Users who may spend long amounts of time working offline away from the server must connect to the server at least once every 30 days or be automatically disconnected from the server. Once disconnected, the client license is freed and available for another user. The disconnected user is no longer able to access fonts through the Universal Type Client, and must reconnect to Type Server to regain access.
Client license overage
When the number of licensed clients is reached, any additional users who attempt to connect are not able to do so. To forcibly disconnect a user to make that connection available for another user, select the user from the Users panel of the Server Administration application and click [
Force Logout Selected Users
]
.
- 29 -
Enterprise Features
The Enterprise version of Universal Type Server provides extended capabilities for organizations with large font management and compliance needs. The additional and enhanced features available to Enterprise users are: l l l l
External SQL database connection
Automatic Failover Services
Font license compliance enforcement
Font usage and compliance reporting
Font usage and licensing is managed through the User Management application.
Upgrading to Enterprise
When you are ready to upgrade from Universal Type Server Professional to Universal Type Server Enterprise, you should back up your datastore.
Click Licenses and enter your Enterprise Module serial number, then click [
Add Serial Number
]
.
External SQL Database
Rather than store the Universal Type Server database in the native embedded database, Enterprise users have the option to store all of the required data in an external SQL database. You may want to do this if: l
Your company maintains a dedicated database server for data management and centralization l l purposes.
You need to take advantage of the additional administration and performance tuning options in thirdparty SQL databases that are not available in the embedded Type Server database.
You require a distribution of hardware resources to improve the performance and scalability of your server.
After configuring the connection to an external database, most administrative functions, and all client-level interaction with Universal Type Server function the same as the native, embedded Type Server database.
External Database Requirements
Universal Type Server Enterprise supports the following SQL database servers: l
Microsoft SQL Server 2008 SP1, 2008 R2, 2008 R2 Express, 2012, or 2014 (Windows) l
MySQL 5.5 or later (OS X or Windows)
Note: While it may be possible to use Universal Type Server with other versions of these databases, no others have not been tested and cannot be supported.
- 30 -
Hardware recommendations for an external SQL database
l
For best performance, your database server should be configured on a separate server-grade computer l l l from your Universal Type Server.
In general, faster processor cores, faster memory, a faster disk interface, faster hard disk, and faster network connection will yield optimal performance.
If possible, your database software and database should be installed on a separate physical disk from the database server’s operating system.
Follow these system requirements or recommendations for your particular database: n
Microsoft SQL Server 2012:
http://msdn.microsoft.com/en-us/library/ms143506
n
(v=sql.110).aspx
Microsoft SQL Server 2014:
http://msdn.microsoft.com/en-us/library/ms143506
(v=sql.120).aspx
MySQL does not publish specific system requirements for the database server itself. See
http://dev.mysql.com/doc/workbench/en/wb-requirements-hardware.html
for requirements for the highly-recommended MySQL Workbench.
Installing an External Database
Install Universal Type Server
Before configuring the external database connection, install the Universal Type Server application, and then proceed with the instructions below.
If you have previously installed and configured Universal Type Server, and prefer to upgrade your data, follow
the instructions for Converting Between Database Types on page 35. There is no need to re-install
Universal Type Server.
Install the database server and create a database
Install and configure your external database server. To get the benefits of an external database, we recommend installing your database server on a separate system from Universal Type Server. While it is possible to install the database server on the same hardware, the most benefit will be achieved from separate hardware.
1. Install the database server following the manufacturer’s instructions.
2. Using the database administration interface or command line tools provided by your database server, create a username and password for Universal Type Server to the new SQL database. In Microsoft
SQL Server, the username is called a “Login.” Choose SQL Server Authentication when creating your new login.
3. Create a new empty SQL database for the Universal Type Server datastore. The user that you created in the previous step must be set as the database owner.
IMPORTANT
When creating the database, be sure to specify Latin1_General_BIN2 collation for MS SQL Server. For MySQL, leave collation as Server Default.
For detailed assistance setting up MySQL on Mac OS X, see Installing MySQL on Mac OS X on page 33.
Open a port in the firewall
If you are using a firewall on the computer that hosts the SQL server, you must open a port so that Universal
Type Server can connect to the SQL database.
The default SQL port for Microsoft SQL Server is port 1433.
- 31 -
The default SQL port for MySQL is port 3306.
This port can be changed in your database server to meet any specialized requirements.
Connect Universal Type Server to the empty SQL database
2. In the Datastore area, click Database.
3. Click the Database Type drop-down menu and select your database server type.
4. Enter the following fields so that Universal Type Server can connect to the new database server.
Field Description
Server Address Either the DNS name or IP address of the computer hosting the database server.
Port
Database Name
Username
Password
The port used to access the external database server. The default Microsoft SQL Server port is 1433, and for MySQL the default is 3306.
The SQL database name.
The username that you created for Universal Type Server to use. When using Microsoft
SQL Server, this is the “Login” name.
The password for the username above.
5. The Additional Parameters field is used to modify the behavior of the connections between
Universal Type Server and the SQL database server. The use of this field is relatively rare. If required, enter any parameters provided by your SQL Database Administrator. The following table illustrates a number of parameters that may be helpful. For more information about additional parameters, see
http://jtds.sourceforge.net/faq.html#urlFormat
.
Parameter Usage Description namedPipe namedPipe=[true, false]
When set to true, named pipe communication is used to connect to the database instead of TCP/IP sockets. This can result in performance gains when the SQL Server is running on the same computer as the Universal Type Server.
instance instance="<instance name>"
Allows the Universal Type Server to connect to a named instance of SQL Server.
6. Click [
New datastore
]
to create the new datastore.
Verify database creation
After creating the new datastore, click Status in the Server Administration application. Check in the Status window to verify that Universal Type Server has stopped and restarted. This is your indication that the
for solutions to common issues.
You can now administer the Universal Type Server the same as you would with an embedded database.
- 32 -
Installing MySQL on Mac OS X
Most of these instructions require administrator access. You should log in to the computer using an account with administrator privileges.
NOTE
These instructions refer to MySQL Community Server, the free communitysupported version of MySQL. Your organization may prefer a commercial version of MySQL; for more information, visit
http://www.mysql.com/products/
.
Download and Install MySQL Server
1. Download the MySQL Community Server from
http://www.mysql.com/downloads/mysql/
.
Choose a DMG Archive (Disk Image) for your version of Mac OS X (10.5 or 10.6) and processor architecture (x86, 32-bit or 64-bit).
2. Double-click the downloaded file to mount the disk image as a virtual disk. The DMG contains three components that must all be installed.
3. To install MySQL, double-click the MySQL installer package and follow the instructions to complete the installation.
4. When the MySQL installation is complete, double-click MySQLStartupItem.pkg to install the startup item.
5. Double-click MySQL.prefPane to install the MySQL Preference Pane.
You can find detailed installation instructions online at
http://dev.mysql.com/doc/refman/5.5/en/macosx-installation-pkg.html
.
Download and Install MySQL Workbench
MySQL Workbench is a powerful graphical front end for creating and administering MySQL databases.
1. Download MySQL Workbench from
http://www.mysql.com/downloads/workbench/
.
2. Double-click the DMG file that you downloaded. This mounts and opens a virtual disk named
MySQL Workbench.
3. Drag the MySQLWorkbench icon into your Applications folder.
NOTES ABOUT MYSQL WORKBENCH l l
The interface works something like a modern web browser: some functions will open a new tab inside the main window to display the controls needed to complete the function. To close the tab, move your mouse pointer to the tab, then click the X icon that appears there.
MySQL Workbench uses the term schema synonymously with the term
database.
- 33 -
Create a Database
Create a Configuration File
Before you can create a server instance, you need to create a local MySQL configuration file. The easiest way to do this is to copy a sample file that comes with MySQL.
1. Open the Terminal application.
2. Type cd /usr/local/mysql/support-files/ then press
RETURN
.
3. Type sudo cp my-huge.cnf /etc/my.cnf then press
RETURN
.
4. If you are prompted for a password, type your login password and press
RETURN
.
5. Type exit and press
RETURN
, then quit Terminal.
Create a Server Instance
1. Make sure MySQL is running. Open System Preferences, click the MySQL icon, and click
[
Start MySQL Server
]
.
2. Start MySQL Workbench.
3. Under Server Administration, click New Server Instance.
This starts a step-by-step wizard that helps you create the server instance.
4. In the Specify Host Machine panel, choose localhost and click [
Continue
]
.
5. In the remainder of the setup panels, keep the default settings and click [
Continue
]
until you reach the final panel.
6. In the Complete Setup panel, click [
Finish
]
.
This will add an icon to the Connections list under SQL Development on the left, and add an icon to the Servers list under Server Administration on the right.
7. Double-click the new icon under Server Administration. This opens an Admin tab, where you will configure user accounts on the server.
8. Click Users and Privileges on the left under Security.
There may already be several accounts listed here; you can ignore them but do not delete them.
9. Under User Accounts, click [
Add Account
]
.
10. In the Account Details Login panel, enter this information:
Login name: typesql
Password: sqltype
Confirm password: sqltype
Limit Connectivity to Hosts Matching: localhost
11. Click Administrative Roles.
12. In the list of roles, check DBA, then click [
Apply
]
.
13. Click [
Add Account
]
and create another account with the same details and roles except use
127.0.0.1 instead of localhost for Limit Connectivity.
NOTE
The accounts for localhost and 127.0.0.1 allow access to the MySQL
Server using the typesql login from the computer that is running MySQL
Server. If you want to access this login from another computer, such as the computer running Universal Type Server, then repeat steps 9 through 12 using the same Login name, Password, and Administrative Roles, but use the IP address of the other computer for Limit Connectivity.
14. Close the Admin tab.
- 34 -
Add a Database
1. Double-click the localhost icon under SQL Development on the left.
This will open the SQL Editor tab. The panel on the left lists the current schemas, or databases.
2. Right-click in the space below the last database in the list and choose Create Schema from the shortcut menu.
3. In the Schema window, enter a schema name.
4. On the Default Collation menu, choose utf-8 - default collation.
5. Click [
Apply
]
.
This opens the Apply SQL Script to Database window.
6. Click [
Apply
]
again.
7. Make a note of the success state of your script, then click [
Close
]
in the Apply SQL Script window.
8. If your script was not successful, try again, making sure there are no illegal characters in the database name.
Otherwise, click [
Close
]
in the Schema window.
9. Close the SQL Editor tab.
Set the user permissions
1. Double-click the icon under Server Administration on the right.
2. Click Users and Privileges on the left under Security.
3. Click the Schema Privileges tab at the top of the Users and Privileges panel.
4. Select the typsql user in the Users list on the left.
5. Click [
Add Entry
]
on the right.
6. In the Host section of the New Schema Privilege Definition dialog, click Selected host and choose 127.0.0.1 from the pop-up menu.
7. In the Schema section, click Selected schema and select the schema you created in the section above.
8. Click [
OK
]
.
9. Click [
Select "ALL"
]
at the bottom left of the Schema Privileges panel, then click
[
Save Changes
]
.
10. Click [
Add Entry
]
again.
11. Click Selected host and choose localhost from the pop-up menu.
12. Click Selected schema and select the schema you created in the previous section.
13. Click [
OK
]
.
14. Click [
Select "ALL"
]
, then click [
Save Changes
]
.
NOTE
These steps add permissions for the typesql user accessing the MySQL
Server from the computer that MySQL is installed on. If you added access for other computers in the Create a Server Instance section above, then repeat steps 10 through 14 to set permissions for each of those computers as well; choose the appropriate IP address from the Selected host pop-up menu.
15. Choose File > Quit.
Converting Between Database Types
With Universal Type Server Enterprise and an appropriate SQL database server installed, converting between two different database types is the relatively simple process of backing up and restoring.
- 35 -
You may need to convert between one database type and another if you need to: l
Upgrade from the embedded database to an external SQL database.
l l l
Troubleshoot an issue and want to maintain continuity of connection for your users.
Perform necessary maintenance on the external SQL server.
Port your database from one database server type to another.
In general, to convert from one database to another, backup the source database, change the database type in Universal Type Server, then restore the backup.
Warn users
Before beginning the process, warn users that they will be logged out of Universal Type Server automatically during the backup process.
To ensure that all current data is captured and not modified between the backup and restore processes, users should not log back in until after the upgrade process is complete.
Backup the current database
Before you begin the conversion process, it is essential that you create a backup file of your current installation. This backup file will be used to transfer your data between the source and target database servers.
To backup your current Universal Type Server to your current backup location:
1. Under Datastore on the left, click Backups.
2. Note your current backup location, and click [
Backup now
]
.
Switch to the new database server
The process to switch from one database server to another varies depending upon the new database server you are choosing, as well as the source database type.
If you are moving from the native, embedded Universal Type Server database to a new external SQL database server, or are moving from one type of external database to another:
Universal Type Server.
2. Proceed to the next step to restore your backup file.
If you are moving an external database server to an embedded Universal Type Server database:
1. Open your web browser and start the Server Administration application.
2. Under Datastore on the left, click Database.
3. Choose Database Type > PostgreSQL.
4. Click [
New Datastore
]
.
5. Proceed to the next step to restore your backup file.
Restore the backup
Restoring a previous backup automatically populates your new database, and performs any necessary upgrades to the data so that it is compatible with the current version of Universal Type Server.
new database with your previous data.
Your database is now converted to the new database type and ready to be used.
- 36 -
Verify database creation and connection
After you’re done restoring the backup, check the status page of the Universal Type Server, Server
Administration application to confirm that the server has stopped and restarted. This is your indication that
External Database Error Messages
If you are having problems during the creation or connection to an external SQL database, Universal Type
Server logs pertinent info to help you diagnose potential problems. This information is displayed in the
Status page of the Server Administration application, as well as included in the extensis.admin.log file.
To view server status:
1. Open your web browser and start the Server Administration application.
2. Click Status in the menu on the left to display the server status page. The status window displays the extensis.admin.log file indicating the most recent server activity.
3. Check for any error messages.
Some of the possible errors are listed in the chart below. Be sure to note any specific error messages. These are essential for proper issue diagnosis by Extensis Technical Support.
Error message
Error creating new datastore: Unable to connect to database server: Network error IOException: Connection refused: connect
Error creating new datastore: Unable to connect to database server: Login failed for user ‘username’
Potential issue
Unable to connect to the specified SQL Server
Error creating new datastore: Unable to connect to database server: Cannot open database “databasename” requested by the login. The login failed.
SQL database login authentication failure. This may happen in the case of wrong password, incorrect username, nonexistent username, or improper user permissions.
The SQL database does not exist, or was not properly created.
Configuring Automatic Failover Services
Enterprise users can configure a system to maximize server uptime. By setting up a simple failover system, you gain: l l l l
Maximum server uptime
Data consistency
Seamless client switching when needed
A failover license is included with the Enterprise installation
If the primary Type Server fails, client requests are automatically and seamlessly routed to the secondary Type
Server. End users will not be aware of any change in the system.
- 37 -
Recommended Configuration
A proxy failover configuration that is simple to set up and maintain includes the following systems: l l l l l
A primary Universal Type Server
A secondary (or backup) Universal Type Server
A proxy server
A database server
A file server for housing the Universal Type Server font vault
Note that each of these servers should have its own backup mechanism.
The first diagram shows the components and the relationship between them.
The second diagram shows how the backup Type Server takes over if the primary Type Server fails.
- 38 -
Setup
Note: All servers in this configuration need to be on the same subnet.
In the following instructions, when we refer to the applications folder, it is the folder named
“applications” located inside the Universal Type Server folder. By default, this folder would be:
Windows: C:\Program Files\Extensis\Universal Type Server\applications\
Macintosh: /Applications/Extensis/Universal Type Server/applications/
The instructions for configuring your servers are different depending on whether you are setting up your system for the first time, upgrading an existing system that uses a native database, or upgrading a system that uses an external SQL database.
Downloads
You will need to download these files to configure your servers.
Windows l l
Apache Tomcat™ version 6.0.35 (do not download a newer version) for 64-bit Windows:
http://archive.apache.org/dist/tomcat/tomcat-6/v6.0.35/bin/apachetomcat-6.0.35-windows-x64.zip
for 32-bit Windows:
http://archive.apache.org/dist/tomcat/tomcat-6/v6.0.35/bin/apachetomcat-6.0.35-windows-x86.zip
Java JDK 1.5 or newer (1.7 recommended)
http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html
1. Scroll down the page to the section labeled Java SE Development Kit 7u80.
2. Click Accept License Agreement.
l
3. Click the download link for Windows x64 (for 64-bit Windows) or Windows x86 (for 32-bit
Windows).
Notepad++ (recommended but not required; this is a free text editor with syntax highlighting)
http://notepad-plus-plus.org/
Macintosh l l
Apache Tomcat version 6.0.35 (do not download a newer version)
http://archive.apache.org/dist/tomcat/tomcat-6/v6.0.35/bin/apache-tomcat-6.0.35.zip
Java JDK 1.5 or newer (1.7 recommended)
http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html
1. Scroll down the page to the section labeled Java SE Development Kit 7u80.
l
2. Click Accept License Agreement.
3. Click the download link for Mac OS X x64.
TextWrangler (highly recommended; this is a free text editor with syntax highlighting and commandline integration)
http://www.barebones.com/products/textwrangler/
Install TextWrangler, launch it, and choose Install command line tools from the TextWrangler menu.
The instructions that follow assume you will be using TextWrangler or its bigger badder brother BBEdit.
- 39 -
Other important tidbits
Other information you will need to know for configuring your servers: l l
You will need the IP address for both the Primary Type Server and the Secondary Type Server.
If you are configuring your system for single-sign on using Kerberos, the Primary and Secondary Type
Servers need to be configured with their own service accounts on the domain server, their own Service
Principal Names (SPNs), and their own keytabs.
Setting up for the first time
Primary Type Server
IMPORTANT
If you use Universal Type Server’s built-in backup scheduler to back up your datastore, you only need to schedule backups on the Primary Type Server.
The Type Server will be in Standby mode while the scheduled backup is running, and will return to normal access when the backup completes.
1. Install the Primary Universal Type Server. See Installation Overview on page 5.
Database on page 30 and Moving the Vault on page 22.
3. Stop the Primary Type Server. See Stopping, Starting, and Restarting the Server on page 17.
4. Run the failover setup script on the Primary Type Server.
Windows:
a. Open a command prompt window.
Windows Server 2012: Press
WIN+X and choose Command Prompt.
Windows Server 2008: Click Start, choose Run, type cmd and press
ENTER
).
b. Change to the applications directory inside the Universal Type Server directory.
Type cd "C:\Program Files\Extensis\Universal Type
Server\applications" and press
ENTER
.
c. To run the script, type win-failover-setup primary and press
ENTER
.
Macintosh:
a. Open the Terminal application (inside the Utilities folder in the Applications folder on your server’s hard disk).
b. Change to the applications directory inside the Universal Type Server directory.
Type cd "/Applications/Extensis/Universal Type Server/applications" and press
RETURN
.
c. To run the script, type sudo ./mac-failover-setup.sh primary and press
RETURN
, then type your administrator password.
5. Start the Primary Type Server.
Configuring the Proxy Server
The following installations and other procedures are performed on the system that will become the Proxy
Server.
1. Install the Java JDK.
To confirm that the installation is functioning, open Command Prompt (Windows) or Terminal (OS X) and type java -version. This should display the version number of the JDK that you just installed.
2. Create a system variable named JAVA_HOME set to the installation path of the Java JDK, then add this variable to the system PATH variable.
- 40 -
Windows:
a. Open the Control Panel, click System, then click Advanced System Settings on the left.
b. In the System Properties window, click Environment Variables.
c. Create a new System Variable and give it the name JAVA_HOME, set its value to the path to the
JDK installation folder (for example, C:\Program Files\Java\jdk1.7.0_80\), then click
[
OK
]
.
Make sure to enter the path to the JDK files, not the JRE. Also make sure to add the trailing backslash (\) character.
d. Edit the System Variable PATH, and add the following to the end of the existing value:
;%JAVA_HOME%bin;
Important: Be sure to add to the end of the variable value; do not replace it!
e. Click [
OK
]
in the Environment Variables window, click [
OK
]
in System Properties, then close the Control Panel.
f. Confirm that the environment is set correctly. Open a command prompt window, type path, and press
ENTER
. The last element of the PATH variable should be the full path to the JDK bin folder (for example, C:\Program Files\Java\jdk1.7.0_80\bin).
Macintosh:
These instructions assume you are using TextWrangler’s (or BBEdit’s) command-line tools for editing.
a. Open Terminal.
b. Type edit .profile and press
RETURN
.
The .profile file in your user directory is a shell script that is run when you log in to your Mac; we will use this to set environment variables.
c. Scroll to the end of the .profile file. (This file may very well be empty.) d. Type export JAVA_HOME=/Library/Java/JavaVirtualMachines/jdk1.7.0_80.jdk
and press
RETURN
.
Be sure to use the correct path for your version of the Java JDK.
e. Type export PATH=$JAVA_HOME/bin:${PATH} and press
RETURN
.
Remember that variable and path names are case sensitive!
f. Save the file and exit TextWrangler.
g. Confirm that the environment variables are set correctly. Log out from your Mac, then log back in. Open Terminal and type env.
You should see that the PATH variable now starts with the full path to the JDK bin folder, and the JAVA_HOME variable is set as expected.
3. Install Apache Tomcat.
Make a note of where you install Tomcat; you'll need to know its location in later steps.
4. Copy the file esp-proxy.war, located in the applications folder, into the Tomcat webapps folder.
5. In the Tomcat webapps folder, rename the ROOT folder to ROOT_original, then rename the file esp-proxy.war to ROOT.war.
- 41 -
6. Start the Proxy.
Windows:
a. Open a command prompt window.
b. Change to the bin directory of your Tomcat installation. Type (for example) cd "C:\Program
Files\apache-tomcat-6.0.35\bin" and press
ENTER
.
c. Type startup and press
ENTER
.
Macintosh:
a. Open Terminal.
b. Change to the bin directory in your Tomcat installation. Type (for example) cd
"/Applications/apache-tomcat-6.0.35/bin" and press
RETURN
.
c. Type sudo ./startup and press
RETURN
, then type your administrator password.
7. Edit data.xml to include the IP addresses of your Primary and Secondary Type Servers.
From the Tomcat installation directory, data.xml is in /webapps/ROOT/WEB-INF/config/.
a. Open data.xml in a text editor.
b. Find the lines that start with <server domainName=. Substitute the IP address for your
Primary Type Server for the text UTSserver1, and the IP address for your Secondary Type
Server for the text UTSserver2. The lines should look something like this:
<server domainName="192.168.0.101:8080" />
<server domainName="192.168.0.102:8080" />
If you have changed the port used for the HTTP/Web Service from the default value of 8080, then use that value in the lines above.
c. Find the line that starts with <esp-proxy. If you have changed the port used for the
HTTP/Web Service from the default value of 8080, then enter that value for the servicePort parameter. If you have changed the port used for the HTTPS/Web Service from the default value of 8443, then enter that value for the securePort parameter.
d. Save your changes and close data.xml.
8. You will need to manually replace the server start/stop script included with the Tomcat distribution.
Windows:
a. Make a backup copy of the file catalina.bat, located in Tomcat’s bin directory.
b. Locate the file catalina.bat at /webapps/ROOT/WEB-INF/config/ in the Tomcat installation directory.
c. Copy this file to Tomcat’s bin directory, replacing the existing file.
Macintosh:
a. Make a backup copy of the file catalina.sh, located in Tomcat’s bin directory.
b. Locate the file catalina.sh at /webapps/ROOT/WEB-INF/config/ in the Tomcat installation directory.
c. Copy this file to Tomcat’s bin directory, replacing the existing file.
d. Make the catalina.sh script executable. In a Terminal window, enter chmod 755 followed by the path to the file. Example: chmod 755 /Applications/apache-tomcat-6.0.35/bin/catalina.sh
- 42 -
9. Because the default Tomcat installation does not include an open port for secure traffic, you will need to replace the existing server.xml file with one included with Universal Type Server.
a. Make a backup copy of the Tomcat default server.xml file located in Tomcat’s conf directory.
b. Locate the server.xml file at /webapps/ROOT/WEB-INF/config/ in the Tomcat installation directory.
c. Copy this file to Tomcat’s conf directory, replacing the existing file.
d. If you have changed the HTTP/Web Service port from the default value of 8080, then you will need to edit the server.xml file and change all occurrences of the text port="8080" to include the updated port value.
If you have changed the HTTPS/Web Service port from the default value of 8443, then you will need to change all occurrences of the text port="8443" and redirectPort="8443" to use the updated port value.
10. Shut down the Proxy.
Windows: Open a command prompt, switch to Tomcat’s bin directory, type shutdown, and press
ENTER
.
Macintosh: Open Terminal, switch to Tomcat’s bin directory, type sudo ./shutdown and press
RETURN
, then type your administrator password.
11. Start the Proxy again.
Configuring Tomcat as a Windows service
If your Proxy is running on a Windows server, you can configure Tomcat as a service so that it starts automatically.
1. Open a command prompt with Administrator privileges.
2. Change to Tomcat’s bin directory.
Example: cd "C:\Program Files\apache-tomcat-6.0.35\bin".
3. Type setup.bat install and press
ENTER
.
This installs Tomcat as a service; you will need to configure the service to start when you want it to. Run services.msc, right-click on the Tomcat service, select Properties, set the Startup Type, click [
OK
]
, then close the Services window. You may also need to restart your server.
- 43 -
Secondary Type Server
1. Install the Secondary Type Server.
2. Stop the Secondary Type Server.
3. Run the failover setup script on the Secondary Type Server. Follow the instructions above, but change the script parameter primary to backup in the final step (type sudo ./mac-failoversetup.sh backup or win-failover-setup backup).
NOTE
If you have multiple Universal Type Servers that you are configuring with failover service, you will need to specify a unique multicast address for each pair of Primary and Backup Type Servers. For further instructions, run the failover setup scripts with no parameters (i.e., sudo ./mac-failoversetup.sh or win-failover-setup.
4. Start the Server Admin application on the Secondary Type Server.
5. Enter the same serial numbers that you used for the Primary Type Server.
6. Connect to the existing external database.
The button should be labeled [
Join Datastore
]
instead of [
New Datastore
]
.
7. Start the Secondary Type Server.
8. Connect to the existing external vault.
Confirm configuration
Note: This step helps you confirm that your servers are running correctly and is completely optional.
View the most recent log file to confirm that both Primary and Secondary Type Servers are running.
Log files are in the logs folder inside the Tomcat installation directory. The most recent Tomcat log file is named catalina.out.
Look near the end of the file for entries that resemble the following:
INFO: PRIMARY Universal Type Server : 192.168.0.101:8080 is up.
. . .
INFO: BACKUP Universal Type Server : 192.168.0.102:8080 is up.
Upgrading an existing native database
Your existing Universal Type Server will become your Primary Type Server.
1. Move your vault to an external location where it can be shared by your Primary and Secondary Type
Servers. See Moving the Vault on page 22 for instructions.
2. Back up your existing datastore. See Backing Up the Datastore on page 24.
3. Configure your external database. See External SQL Database on page 30.
4. Restore your datastore backup. See Restoring a Backup on page 25.
This copies your previous native database to the new SQL database.
5. Continue from step 3 under Setting up for the first time on page 40.
- 44 -
Upgrading an existing SQL database
Your existing Universal Type Server will become your Primary Type Server. These instructions assume your
SQL database resides on a separate server from your Universal Type Server.
1. Move your vault to an external location where it can be shared by your Primary and Secondary Type
Servers. See Moving the Vault on page 22 for instructions.
2. Back up your existing datastore. See Backing Up the Datastore on page 24.
This is a precautionary measure.
3. Continue from step 3 under Setting up for the first time on page 40.
- 45 -
Modules
Universal Type Server now supports add-in modules that provide functionality for specific tasks, such as providing fonts in an automated workflow using Adobe® InDesign® Server.
To add a module’s functionality, you need to install the module on the same system with your Universal
Type Server, then enter a license for the module in the Server Admin application.
Specific modules may have other requirements; see the individual topics for each module.
To purchase a module, contact your Extensis sales representative.
FontLink
Automates font preflighting
FontLink is a module for Universal Type Server that dynamically delivers fonts for documents in automated publishing workflows using Adobe® InDesign Server®.
Having the correct fonts during the production process is critical for any InDesign Server workflow. Missing or incorrect fonts can quickly derail any automated processes and pull people away from other critical tasks.
FontLink solves the font management problem by easily plugging-in to any automated, multi-channel publishing workflow, no matter how complex.
Speeds up document processing
FontLink examines and gathers fonts for InDesign documents at any point before they are handed off to
InDesign Server, removing manual document processing tasks for output.
- 46 -
Ensures the correct fonts with Font Sense
FontLink leverages the same powerful Font Sense technology as Universal Type Server.
During the creative process, Universal Type Server’s font auto-activation plug-ins automatically embed Font
Sense metadata to identify and record all of fonts in use in InDesign documents.
FontLink reads Font Sense metadata from the InDesign document and collects the required fonts from
Universal Type Server for output.
Easy Content Management System integration
FontLink is easily integrated with most popular professional content management software solutions and fits any point prior to InDesign Server processing.
Jobs are processed using straightforward input, output and error folders, ensuring the most straightforward integration.
Delivers real-time alerts
Publishing administrators stay informed with instantaneous email alerts of font-related errors. Daily reports of completed and failed jobs ensure efficient server monitoring and record keeping.
Contact us for pricing details and to discuss your automated publishing workflow. For more information see the FontLink page (
http://www.extensis.com/fontlink/
).
FontLink and font compliance
FontLink provides copies of your document fonts to InDesign Server on demand for processing. To remain compliant, it is important that you license your fonts for server or production use as required by their foundries. Most Foundries offer different licensing options for the various output options (i.e. PDF output, ePub, etc.). Please consult foundry (EULA) End User License Agreements for more information about storing your fonts on a Server and other required licensing details.
FontLink System Requirements
FontLink Module
FontLink Module is installed on the system running Universal Type Server.
l l l
Universal Type Server Enterprise Edition version 5.1.0 or later
Mac OS® X or OS X Server, v10.8 through 10.10
—o r—
Windows® Server 2008 R2, Windows Server 2012, or Windows Server 2012 R2
1.3 GB hard drive space
FontLink Connector
FontLink Connector is installed on the system running InDesign Server.
l l l
Adobe InDesign Server CS6 or later
Mac OS® X or OS X Server, v10.8 through 10.10
—o r—
Windows® Server 2008 R2, Windows Server 2012, or Windows Server 2012 R2
FontLink Connector requires 1.3 GB hard drive space per instance of Adobe InDesign Server
Supported documents
FontLink processes InDesign documents (INDD) and templates (INDT) from InDesign CS6 and later. In order to work with FontLink, documents must be saved using the Extensis auto-activation plugin from Universal
- 47 -
Type Client version 4.0.2 or later (or Suitcase Fusion 6 v17.0.0 or later). Ensure that the Enable Font
Sense Support option is turned on for each user in the InDesign auto-activation preferences.
You can easily upgrade documents that don’t meet these requirements by opening them in a supported version of InDesign with the auto-activation plug-in, then re-saving them.
For font compliance purposes, InDesign files processed by FontLink must include fonts hosted on your
Universal Type Server. Files containing fonts not recognized by Universal Type Server will raise an error during processing.
Setting up FontLink
A FontLink installation consists of several components: l l l l
Universal Type Server
FontLink Module
Adobe InDesign Server
FontLink Connector
If your organization has an email server, FontLink can send a daily digest of completed jobs, or alert administrators to files that can’t be processed.
Order of installation
Before you can install and configure the FontLink-specific components of Universal Type Server, you need to have a working installation of Adobe InDesign Server CS6 or later, and a working installation of Universal
Type Server Enterprise Edition version 5.1 or later.
Once you have your servers running, do the following:
1. Install FontLink Connector on your InDesign Server system.
2. Create the following folders on your InDesign Server system: a folder for jobs to be processed by
FontLink (called the Input fo lder), a folder for jobs that have been processed successfully (called the
Output fo lder), and a folder where jobs that can’t be processed are sent (called the Erro rs fo lder).
Note: These folders can be created on network volumes. Due to platform-specific differences results may vary between operating systems.
3. By default, InDesign Server uses port 12345 to identify its first running instance. You can change this if necessary. If you are running multiple instances of InDesign Server, you must configure each with its own unique port number. See the InDesign Server documentation for port-specific setup instructions.
4. Install the FontLink Module on the Universal Type Server system.
6. Enter the details for your email server in the Server Admin application. See Configuring FontLink
7. Connect each instance of InDesign Server in the Server Admin application. See Connecting to
InDesign Server on the next page.
- 48 -
Connecting to InDesign Server
In order for the FontLink Module of Universal Type Server to communicate with a running copy of InDesign
Server and its corresponding FontLink Connector, you need to provide information to Universal Type Server.
To identify your InDesign Server to FontLink, click Modules in the menu on the left, then click
[
Add a Server Instance
]
.
l
Instance Name: This identifies a specific running instance of InDesign Server in logs, email digests, and l l error emails. Use a friendly and descriptive name, such as 3rd floor Production.
IP Address (with port): This is the IP address of the system that hosts the InDesign Server and FontLink
Connector. Include the specific port for the instance of InDesign Server. By default, InDesign Server runs on port 12345; see your InDesign Server documentation to change this.
Example: 123.45.67.89:12345
Input Folder: Enter the full path to the folder on the InDesign Server system where FontLink will watch for jobs to process. This folder can be local on the InDesign Server or on a network volume accessible to the InDesign Server.
Examples:
n n
D:\data\fontlink-input\ (Windows local folder)
Z:\production\fontlink-in\ (Windows remote folder; drive Z: is mapped to a network share l l l l n n or folder)
/Users/Shared/FontLink input/ (Macintosh local folder)
/Volumes/Production/FontLink in/ (Macintosh remote folder; the volume Production must be mounted on the InDesign server system)
Output Folder: Enter the full path to the folder where FontLink will place processed files.
Error Folder: Enter the full path to the folder where FontLink will move jobs that can’t be processed.
Daily Digest Notifications: Enter a comma-separated list of email addresses where you would like to send a daily digest listing jobs successfully processed by this InDesign Server instance. The daily digest is sent once a day for jobs processed during the previous 24 hours.This feature requires that you enter your network’s email server details in the FontLink Module panel.
Error Notifications: Enter a comma-separated list of email addresses where you would like to send messages about jobs that could not be processed. These messages are sent immediately.
Enter the above information and click [
Save
]
.
Adding more connections
You can connect FontLink Module to more than one instance of InDesign Server. In this way, you can leverage the additional processing power of your InDesign Server system.
To add another connection, follow the steps above. Be sure to enter a unique Instance Name and port value for each instance of InDesign Server.
Your initial license for FontLink allows up to three connections to InDesign Server. Contact your Extensis
Sales representative for information about additional connections.
Removing a connection
If you need to make a change to one of your InDesign Server connections, you need to remove the connection and then re-create it. Before you do so, make sure you have copied down any required information.
- 49 -
To remove a connection:
1. Click Modules in the list on the left.
2. Select the InDesign Server instance connection that you want to remove.
3. Click [
Details
]
and copy down any information that you will need to re-create the instance, then click [
Back
]
.
4. Select the Server Instance and click [
Delete
]
. In the confirmation dialog, click [
OK
]
.
Follow the steps above to re-create the Server Instance.
Configuring FontLink notifications
FontLink can send email notification when a job cannot be processed, and can also send a daily digest listing successfully completed jobs. In order to have FontLink send notifications, you need to enter information about your organization’s email server.
Supported email servers
Any SMTP email server can be used to send FontLink notifications. The email server needs to be on the same network as the FontLink module, and needs to support incoming messages without authentication.
Adding your email server
To add your email server’s details so that FontLink can send job notifications:
1. Click Modules in the menu on the left.
2. Under Email Services Setup, click [
Setup
]
.
3. Enter the domain-specific name of your email server (such as smtp.example.com).
4. Enter the port used to accept incoming email message requests.
5. Click [
Save
]
.
Removing your email server
To remove your email server, click Modules, then click [
Remove
]
under Email Service.
Restarting FontLink services
Note: Universal Type Server must be running before you can restart the FontLink Module service.
Windows
To restart the FontLink Module service on a Windows server running Universal Type Server
1. Open the Services browser (Control Panel > Administrative Tools > Services, or type servces.msc
in the Run dialog).
2. Select FontLink Module Service for IDS in the list of services and click Restart Service on the toolbar.
To restart the FontLink Connector service on a Windows server running InDesign Server
1. Open the Services browser.
2. Select FontLink Connector Service for IDS in the list of services and click Restart Service on the toolbar.
- 50 -
Macintosh
To restart the FontLink Module service on a Macintosh server running Universal Type Server:
1. Open a Terminal window.
2. Type sudo launchctl unload
/Library/LaunchDaemons/com.extensis.ids.fontlink.module.jboss.plist and press
RETURN
. Enter your computer’s administrator password when prompted.
This stops the FontLink Module service.
3. Type sudo launchctl load
/Library/LaunchDaemons/com.extensis.ids.fontlink.module.jboss.plist and press
RETURN
.
This starts the FontLink Module service again.
To restart the FontLink Connector service on a Macintosh running InDesign Server:
1. Open a Terminal window.
2. Type sudo launchctl unload
/Library/LaunchDaemons/com.extensis.ids.fontlink.connector.jboss.plist and press
RETURN
.
This stops the FontLink Connector service.
3. Type sudo launchctl load
/Library/LaunchDaemons/com.extensis.ids.fontlink.connector.jboss.plist and press
RETURN
.
This starts the FontLink Connector service again.
FontLink technical details
Ports
FontLink Module requires port 8485 and FontLink Connector requires port 8486 to be open so the two servers can communicate with each other. When Module and Connector are installed on the same server both ports must be open.
These port numbers cannot be changed, so if you have other software using either of these ports you should change the ports used by the conflicting software.
Log files
Each FontLink component records information about its startup condition and all transactions in log files.
FontLink Module log files
FontLink Module maintains two log files:
boot.log: records environment information and status when the FontLink Module starts up
Server.log: identifies JBoss and MySQL system errors and lists all jobs processed
FontLink Module log files are located on the Universal Type Server system:
Windows: C:\Program Files\Extensis\FontLinkModule\jboss\standalone\log\
Macintosh: /Applications/Extensis/FontLinkModule/jboss/standalone/log/
- 51 -
FontLink Connector log files
FontLink Connector maintains four log files:
boot.log: records environment information and status when the FontLink Connector starts up
Server.log: identifies FontLink Connector system errors related to JBoss or MySQL
fontActivationFailure.log: lists jobs that FontLink could not process
fontActivationSuccess.log: lists jobs that FontLink processed successfully
FontLink Connector log files are located on the InDesign Server system:
Windows: C:\Program Files\Extensis\FontLinkConnector\jboss\standalone\log\
Macintosh: /Applications/Extensis/FontLinkConnector/jboss/standalone/log/
Uninstalling FontLink Connector
Note: If you uninstall FontLink Connector, any workflows that rely on its Input Folder location may need to be modified.
To uninstall FontLink Connector on Windows:
1. Choose Start > Control Panel.
2. Click Programs and Features.
3. Select Extensis FontLink Connector.
4. Click [
Uninstall
]
.
To uninstall FontLink Connector on OS X:
1. Open the folder Applications > Extensis > FontLinkConnector.
2. Double-click the FontLink Connector Uninstaller.
3. Follow the instructions on screen to uninstall the FontLink Connector.
Uninstalling FontLink Module
To uninstall FontLink Module on Windows:
1. Choose Start > Control Panel.
2. Click Programs and Features.
3. Select Extensis FontLink Module.
4. Click [
Uninstall
]
.
To uninstall FontLink Module on OS X:
1. Open the folder Applications > Extensis > FontLinkModule.
2. Double-click the FontLink Connector Uninstaller.
3. Follow the instructions on screen to uninstall the FontLink Module.
- 52 -
Command Line Administration Tool
Universal Type Server contains a command line tool that exposes a number of the functions of the Server
Administration application in command line format.
In some cases, this tool allows for more granular control of certain operations and allows these operations to be scripted.
The tool script name is esp-admin and is available in both batch (.bat) and shell script (.sh) formats for use on Windows and Macintosh operating systems, respectively.
The tool resides inside of the Universal Type Server’s applications subfolder. For example:
Windows: C:\Program Files\Extensis\Universal Type Server\applications\
Mac OS X: Applications/Extensis/Universal Type Server/applications/
NOTE
When running the esp-admin.bat using the Windows command prompt, any non-ASCII characters are displayed as question marks. This can cause issues when displaying items that allow Unicode characters, such as the
Bonjour server name.
Viewing Server Settings with the Command Line Tool
If you are unable to use the web application to initially open the Server Administration application, you can use the command line tool to view pertinent server settings. This can happen if you are installing onto a headless server, and there is a port conflict with the default Server Administration port.
To view server settings with the command line tool on Windows:
1. Open a Command Prompt window.
Click Start > Run, type cmd, and press Enter.
2. At the command prompt enter: cd C:\Program Files\Extensis\Universal Type Server\applications\
3. Enter the following command to list server settings: esp-admin -username administrator -password password -getserversettings
NOTE
If you have changed the default administrator password, enter it after
-password in the command.
To view the server settings with the command line tool on Mac OS X:
1. Start the Terminal application located in the Utilities folder inside the Applications folder.
2. At the prompt, enter: cd "/Applications/Extensis/Universal Type Server/applications/"
3. Enter the following command to list server settings: sudo ./esp-admin.sh -username administrator -password password
-getserversettings
The server lists a number of important server settings, including repository location, backup location, and the ports currently in use. The port listed after esp.port.admin-web-app= is the port currently in use for the
Server Administration application.
- 53 -
Properties Files
Many commands require the inclusion of data in a “properties” file to function properly. These files are basically lists of options and the selected values for those options.
Properties files must be saved as standard ASCII text files, and cannot include any high ASCII characters.
The following is an example of the contents of a properties file.
esp.backup.location=C://backups/ esp.backup.filename=mybackup.tar
esp.option.backup.stayinquiescentmode=false
Note: Paths in the properties file must be specified differently than they are in Windows. Use the form <drive_ letter>://<folder>/<folder>/<file>; for example, C://backups/ or
C://Program Files/Extensis/Universal Type Server/data/vault.
Properties files are used with the following commands:
backupdatastore (see backupdatastore on the next page.)
createdatastore (see createdatastore on page 57.)
moverepository (see moverepository on page 61.) restoredatastore (see restoredatastore on page 61.)
Specifying a Username and Password
Almost every command line operation requires the addition of a username and password that has administrative privileges.
The username and password can be specified in the command line each time a command is executed, or it can be specified as an environment variable.
The two environment variables that can be set are: l
ESP_ADMIN_USER, which by default is set to the value administrator, the Server Administrator l username; and
ESP_ADMIN_PW, which by default is set to the value password, the default Server Administrator password.
The following is an example of specifying the username and password in the Windows command line when adding a serial number: esp-admin ESP_ADMIN_USER ESP_ADMIN_PW -addserialnumber XXXX-1234-ABCD-EFGH-
IJKL-MNOP
For assistance setting environment variables, see the documentation for your operating system.
- 54 -
Commands
backupdatastore
-backupdatastore [-properties pro perties.txt] [-force]
Backs up the datastore.
-properties: use properties specified in the file properties.txt.
-force: automatically accept all interactive confirmation prompts.
The properties file is a plain text file that can contain any or all of the following optional settings: esp.backup.location=full_backup_path
The complete path to the backup directory. If not specified, the default backup directory is used.
Note: Paths in the properties file must be specified differently than they are in Windows. Use the form
<drive_letter>://<folder>/<folder>/<file>; for example, C://backups/ or
C://Program Files/Extensis/Universal Type Server/data/vault.
esp.backup.filename=filename.zip
Name of the backup file. The backup is stored as a .ZIP compressed archive; you must include the .ZIP
extension in the filename. If you don’t specify a filename, the backup will be named using the pattern year_mo_dy_hr_mn.zip.
esp.option.backup.stayinquiescentmode=bo o lean
Specifies whether the server will be left in “quiescent” or standby mode after the backup is complete. Valid values are true or false; the default is false.
Use this command to backup the datastore. This command can be used alone, or with a properties file that contains multiple parameters. In addition, the option to dismiss all interactive confirmation prompts is controlled with the force option.
-backupdatastore -properties pro perties.txt -fo rce
- 55 -
The following properties can be specified in the properties file.
Property esp.backup.location
Description
The full, complete directory path to where the backup file will be placed. If not specified, the default backup directory is used.
esp.backup.filename
Name of the backup file. If not specified, the server will use the default backup file naming convention of yyyy_mm_dd_hh_mm.zip
esp.option.backup.stayinquiescentmode Specifies that the server be left in quiescent (standby) mode after backup. Valid values are true or false.
Default value is false.
Required
No
No
No
Note: Paths in the properties file must be specified differently than they are in Windows. Use the form
<drive_letter>://<folder>/<folder>/<file>; for example, C://backups/ or
C://Program Files/Extensis/Universal Type Server/data/vault.
Windows usage example:
esp-admin -username ssmith -password stevespass -backupdatastore -properties properties.txt -force
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -backupdatastore
-properties properties.txt -force
canceldatastoreoperation
This command cancels any current datastore operation, and does not have any parameters.
-canceldatastoreoperation
Windows usage example:
esp-admin -username ssmith -password stevespass -canceldatastoreoperation
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass
-canceldatastoreoperation
checkdatastoreoperationstatus
This command checks the status of any current datastore operations, and does not have any parameters.
-checkdatastoreoperationstatus
Windows usage example:
esp-admin -username ssmith -password stevespass -checkdatastoreoperationstatus
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass
-checkdatastoreoperationstatus
- 56 -
createdatastore
-createdatastore -properties pro perties.txt [-force]
Creates a new database with the properties specified in properties.txt.
esp.repository.directory=fo lder_name
Required. This is the name of the folder that contains the datastore.
esp.repository.type=esp.repository.type.vault
Required. Currently, esp.repository.type.vault is the only supported repository type.
esp.database.driver=esp.database.driver.PostgreSQL
Required. Currently, esp.database.driver.PostgreSQL is the only supported database driver.
esp.database.username=user
Optio nal. The database user’s name.
esp.database.password=passwo rd
Optio nal. user’s password to access the database.
esp.database.hostport=ho st:po rt
Optio nal. Host and port used to connect to the database, in the form host:port. host can be any valid host identifier: the word localhost, an IP address, or a server name; port is the JBoss Web App port.
esp.database.datapath=full_path_to _database
Optio nal. If not specified, the default location is used.
esp.option.backup.stayinquiescentmode=bo o lean
Optio nal.
This command creates a new datastore using a properties file. Before using this command, be sure to have a backup of your current datastore.
the option to dismiss all interactive confirmation prompts is controlled with the force option.
-createdatastore -properties pro perties.txt -force
- 57 -
The following properties can be specified in the properties file.
Property esp.repository.directory
Description
The top level of the datastore.
esp.repository.type
esp.database.driver
The only supported value is esp.repository.type.vault.
Logical name of database type to use. Currently the only supported value is esp.database.driver.PostgreSQL.
esp.database.username
esp.database.password
esp.database.hostport
The database user name.
The database password.
Host and port used to connect to the database.
Formatted host:port, for example: localhost:3487.
Path to the database.
esp.database.datapath
esp.option.backup.stayinquiescentmode Specifies that the server be left in quiescent (standby) mode after creating the datastore. Valid values are true or false. Default value is false.
Required
Yes
Yes
Yes
No
No
No
No
No
Note: Paths in the properties file must be specified differently than they are in Windows. Use the form
<drive_letter>://<folder>/<folder>/<file>; for example, C://backups/ or
C://Program Files/Extensis/Universal Type Server/data/vault.
Windows usage example:
esp-admin -username ssmith -password stevespass -createdatastore -properties properties.txt -force
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -createdatastore
-properties properties.txt -force
directorysynchronize
With directory integration, Universal Type Server is bound to a Directory Service. This command synchronizes Universal Type Server with the Directory Service.
-directorysynchronize
Windows usage example:
esp-admin -username ssmith -password stevespass -directorysynchronize
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass
-directorysynchronize
forcelogouts
This command forces the logout of a specific user as identified by session ID (or GUID).
To identify a user’s session ID, use the getlogins command (see getlogins on the next page). This
command returns a list containing the username, long username, IP address of login client, the login time, as well as the necessary session ID which is also known as the user GUID.
-forcelogouts sessio nID
- 58 -
Windows usage example:
esp-admin -username ssmith -password stevespass -forcelogouts 28203500-FA5D-
8A0A-27BC-E7996E17EDC1
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -forcelogouts
28203500-FA5D-8A0A-27BC-E7996E17EDC1
forcelogoutswithfile
This command forces the logout of a list of users contained within a userlogout text file. The text file must contain one user session ID (or GUID) per line.
To identify a user’s session ID, use the getlogins command. This command returns a list containing the username, long username, IP address of login client, the login time, as well as the necessary session ID which is also known as the user GUID.
-forcelogoutswithfile -file userlo go ut.txt
Windows usage example:
esp-admin -username ssmith -password stevespass -forcelogoutswithfile -file userlogout.txt
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass
-forcelogoutswithfile -file userlogout.txt
getlogins
This command lists all users currently logged in to the Type Server and does not have any parameters.
This command returns a list containing the username, long username, IP address of login client, the login time, and the session ID which is also known as the user GUID. The user session ID can be used to force the logout of specific users using the forecelogouts or forcelogoutswithfile commands (see
forcelogouts on the previous page and forcelogoutswithfile above).
-getlogins
Windows usage example:
esp-admin -username ssmith -password stevespass -getlogins
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -getlogins
- 59 -
getserversettings
This command displays a list of the current server settings.
-getserversettings
The following is a list of server properties displayed by this command:
Property esp.container.autostart
esp.core.bonjour.name
Description
This is the autostart setting of the server: enabled or disabled.
The current Bonjour name of the server.
esp.core.repository.location
The location of the server vault.
esp.core.service.backup.directory Directory where backup files are to be written. This path should allow changes.
esp.core.service.backup.schedule
Backup schedule expression. Expression must adhere to the formats supported by Quartz.
esp.core.service.logging.level
The logging level of the server: error, warn, info, or debug.
esp.core.service.logging.location Directory where logs are to be written. This path should allow changes.
esp.core.service.state
The current state of the server: started, stopped, or standby.
esp.port.admin-web-app The Server Administration port, also called the Jetty Web App port.
esp.port.bootstrap-jnp esp.port.http
The Bootstrap JNP Server Bind Address port.
The User Management port. This port is also used for client connection and also called the JBoss HTTP / Web Service port.
esp.port.jmx-pooled esp.port.jmx-rmi esp.port.rmi-naming esp.port.webservice
The JMX Pooled Port.
The JMX RMI Object Port.
The RMI Naming Service port.
The JBoss Webservice port.
Windows usage example:
esp-admin -username ssmith -password stevespass -getserversettings
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -getserversettings
- 60 -
moverepository
This command moves the font vault (also called the repository) to a new location. This command relies
upon the creation of a properties.txt file (see Properties Files on page 54).
-moverepository -properties pro perties.txt
The following properties can be specified in the properties file.
Property esp.repository.directory
Description
The top level of the datastore.
esp.repository.type
The only supported value is esp.repository.type.vault.
esp.option.backup.stayinquiescentmode Specifies that the server be left in quiescent (standby) mode after moving the datastore. Valid values are true or false. Default value is false.
Required
Yes
Yes
No
Note: Paths in the properties file must be specified differently than they are in Windows. Use the form
<drive_letter>://<folder>/<folder>/<file>; for example, C://backups/ or
C://Program Files/Extensis/Universal Type Server/data/vault.
Windows usage example:
esp-admin -username ssmith -password stevespass -moverepository -properties properties.txt
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -moverepository
-properties properties.txt
reapseats
This command synchronously removes any unused client seats that have not synchronized with the server within 30 days.
-reapseats
Windows usage example:
esp-admin -username ssmith -password stevespass -reapseats
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -reapseats
restoredatastore
WARNING restoredatastore is destructive; it will replace your current datastore with the contents of the specified backup. Be sure this is what you want to do before you execute restoredatastore.
Use this command to restore a backup copy of the datastore. This command relies upon the creation of a properties.txt
prompts is controlled with the force option.
-restoredatastore -properties pro perties.txt -fo rce
- 61 -
The following properties can be specified in the properties file.
Property esp.backup.location
Description
Directory of the backup file. If not specified, the default server backup directory is assumed.
esp.backup.filename
esp.repository.directory
esp.repository.type
esp.database.driver
Name of the backup file.
The top level of the datastore.By default this is
Applications/Extensis/Universal Type
Server/data/vault on Macintosh or C:\Program
Files\Extensis\Universal Type
Server\data\vault on Windows.
The only supported value is esp.repository.type.vault.
Logical name of database type to use. Currently the only supported value is esp.database.driver.PostgreSQL.
The database user name.
esp.database.username
esp.database.password
esp.database.hostport
The database password.
Host and port used to connect to the database.
Formatted host:port, for example: localhost:3487.
Path to the database.
esp.database.datapath
esp.option.backup.stayinquiescentmode Specifies that the server be left in quiescent (standby) mode after restoring the datastore. Valid values are true or false. Default value is false.
Required
No
Yes
Yes
Yes
Yes
No
No
No
No
No
Note: Paths in the properties file must be specified differently than they are in Windows. Use the form
<drive_letter>://<folder>/<folder>/<file>; for example, C://backups/ or
C://Program Files/Extensis/Universal Type Server/data/vault.
Windows usage example:
esp-admin -username ssmith -password stevespass -restoredatastore -properties properties.txt -force
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -restoredatastore
-properties properties.txt -force
- 62 -
setautostart
This command sets the whether the Type Server launches automatically when the computer starts. This command takes a single parameter with one of two values: enabled or disabled.
-setautostart value
Windows usage example:
esp-admin -username ssmith -password stevespass -setautostart enabled
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -setautostart enabled
setbackupdirectory
This command sets the location where backups are stored. The path must a full path and the target location must be writable.
-setbackupdirectory fullpath
Windows usage example:
esp-admin -username ssmith -password stevespass -setbackupdirectory c:\this\is\my\backup\
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -setbackupdirectory
"/Applications/Extensis/Universal Type Server/mybackups/"
setlogdirectory
This command sets the location where log files are stored. The path must be a complete path and the user must have write access to the target location.
-setlogdirectory fullpath
Windows usage example:
esp-admin -username ssmith -password stevespass -setlogdirectory c:\this\is\my\backup\
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -setlogdirectory
"/Applications/Extensis/Universal Type Server/mybackups/"
setlogginglevel
This command sets the logging level of the server and can be set to one of four case-sensitive values: l l l l error warn info debug
-setlogginglevel value
Windows usage example:
esp-admin -username ssmith -password stevespass -setlogginglevel info
- 63 -
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -setlogginglevel info
setmaxbackuplogs
This command sets the maximum number of log files that are backed up.
-setmaxbackuplogs co unt
count must be a whole number greater than zero. The default is 10.
Windows usage example:
esp-admin -username ssmith -password stevespass -setmaxbackuplogs 15
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -setmaxbackuplogs
7
setport
This command is used to set the ports to which clients connect, the User Management port
(esp.port.http) as well as the Server Administration port (esp.port.admin-web-app).
The values must be between 1 and 65536 and not conflict with any other ports currently in use.
-setport po rtname=value
To change the client connection and the User Management application port (JBoss HTTP / Web Service port), use the following command: esp-admin -username administrator -password password -setport esp.port.http=PORT_NUM
Windows usage example:
esp-admin -username ssmith -password stevespass -setport esp.port.http=8080
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -setport esp.port.http=8080
To change the Server Administration application port (Jetty Web App port), use the following command: esp-admin -username administrator -password password -setport esp.port.admin-web-app=PORT_NUM
Windows usage example:
esp-admin -username ssmith -password stevespass -setport esp.port.admin-web-app=18081
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -setport esp.port.admin-web-app=18081
setservername
This command sets the name used by Bonjour to advertise to clients.
-setservername name
- 64 -
Windows usage example:
esp-admin -username ssmith -password stevespass -setservername mysnazzyserver
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -setservername mysnazzyserver
- 65 -
setserversettings
-setserversettings -properties pro perties.txt
The following is a list of server properties available to be set using this command:
Property esp.container.autostart
esp.core.bonjour.name
esp.core.repository.location
Description
This is the autostart setting of the server: enabled or disabled.
The Bonjour name of the server. Any alphanumeric value is acceptable.
The complete full path to the server vault.
esp.core.service.backup.directory Directory where backup files are to be written. This path must allow changes.
esp.core.service.backup.schedule
Backup schedule expression. Expression must adhere to the formats supported by Quartz.
esp.core.service.logging.level
The logging level of the server. Four case-sensitive values are acceptable: error, warn, info, or debug.
esp.core.service.logging.location Complete path to the folder where logs are to be written. This folder must allow changes.
esp.core.service.state
The current state of the server can be set to one of three case-sensitive values: started, stopped, or standby.
esp.port.admin-web-app esp.port.bootstrap-jnp
The Server Administration port, also called the Jetty Web App port. Any positive integer between 1 and 65536 inclusive.
The Bootstrap JNP Server Bind Address port. Any positive integer between 1 and 65536 inclusive.
esp.port.http
esp.port.jmx-pooled esp.port.jmx-rmi esp.port.rmi-naming esp.port.webservice
The User Management port. This port is also used for client connection and also called the JBoss HTTP / Web Service port. Any positive integer between 1 and 65536 inclusive.
The JMX Pooled Port. Any positive integer between 1 and 65536 inclusive.
The JMX RMI Object Port. Any positive integer between 1 and 65536 inclusive.
The RMI Naming Service port. Any positive integer between 1 and
65536 inclusive.
The JBoss Webservice port. Any positive integer between 1 and 65536 inclusive.
Windows usage example:
esp-admin -username ssmith -password stevespass -setserversettings -properties properties.txt
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -setserversettings
-properties properties.txt
- 66 -
setstate
Use this command to change the running state of the server. The server can be started, stopped or put into standby mode with the following case-sensitive values: l started l l stopped standby
-setstate value
Windows usage example:
esp-admin -username ssmith -password stevespass -setstate stopped
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -setstate stopped
tailadminlog
This command displays the most recent activity in the extensis.admin.log file and takes no parameters. This log file is located in the Universal Type Server logs subdirectory.
-tailadminlog
Windows usage example:
esp-admin -username ssmith -password stevespass -tailadminlog
Macintosh usage example:
sudo ./esp-admin.sh -username ssmith -password stevespass -tailadminlog
- 67 -
Contacting Extensis
Extensis
1800 SW First Avenue, Suite 500
Portland, OR 97201
Toll Free: (800) 796-9798
Phone: (503) 274-2020
Fax: (503) 274-0530
Web: http://www.extensis.com
Extensis Europe
Suite 18, Newton House
Kings Park Road, Moulton Park
Northampton NN3 6LG, United Kingdom
Phone: +44 (0)1604 654 270
Fax: +44 (0)1604 654 268
Email: [email protected]
Customer Service
Phone: (800) 796-9798
Web: http://www.extensis.com/ customerservice/
Celartem, Inc.
Phone: +81 3 5574 7236
Email: [email protected]
Web: http://www.celartem.com/en/
Corporate Buying
Phone: (503) 274-4492
Email:
(North America)
Web: http://www.extensis.com/store/corporate-buying/
(all regions)
- 68 -
Technical Support
Technical support for current products is available by phone or through the Extensis website.
l l l l l
North America: (800) 796-9798 , select option 3 (8:00 am–4:00 pm Pacific time, Monday–Friday)
US: (503) 274-7030
Europe: +44 (0)1604 654 270
Web: http://www.extensis.com/support/
Web Support Form: http://www.extensis.com/support/contact-technical-support/
(requires login)
When contacting technical support, please have the following information available: l l l l l
Your product name and serial numbers;
Your computer configuration, including operating system, memory, and hard drive configuration;
Your question, or a description of the difficulty you’re experiencing: what specifically occurs and when;
Any error numbers or messages that display and other information you think may be relevant;
Your phone number if you want to have a representative call you.
Answers to frequently asked questions, troubleshooting tips, and more can also be found at the Extensis
support page (
http://www.extensis.com/support/
).
Extensis also maintains a searchable Knowledge Base
(
http://support.extensis.com/Support/58278/58411/en-US/Portal/Index
) of in-depth articles on various technical topics.
Support Policy
Extensis provides full support for the current version of all shipping products. In addition, Extensis provides limited support for older products up to one year after the product version is no longer offered for sale. For complete details see the Extensis Product Support Policy
(
http://www.extensis.com/support/support-policy-support-extensis/
).
For details on currently supported products, see: l l l l
Portfolio Support Guide (
http://www.extensis.com/downloads/compatibility-guides/portfoliosupport-guide/
)
Universal Type Server Support Guide (
http://www.extensis.com/downloads/compatibilityguides/universal-type-server-compatibility-guide/
)
Universal Type Client Support Guide (
http://www.extensis.com/downloads/compatibilityguides/universal-type-client-compatibility-guide/
)
Suitcase Fusion Support Guide (
http://www.extensis.com/downloads/compatibilityguides/suitcase-fusion-compatibility-guide/
)
Priority Support
If you have a current Annual Service Agreement, you are entitled to priority support.
If you are in North or South America or the Caribbean: l
Email: [email protected]
If you are in Europe, Africa, the Middle East, India, Australasia, or Asia (except Japan): l
Email: [email protected]
If you are evaluating a demo copy of the product, please contact your sales representative for assistance.
- 69 -
Community Support
Extensis maintains community forums on all current and many older products. Often, problems you may be experiencing have been discovered and answered here. In addition, suggestions you have may help others resolve issues.
The forums also serve as a way for Extensis to take the pulse of our user community so that we can identify bugs and other issues and gather suggestions for improving our software.
Please visit the Extensis Forums (
http://forums.extensis.com/
) and bookmark the page.
- 70 -
Index
A application
B
backing up 24 automatic 24 defining a plan 24
backup
Bonjour name
Bootstrap JNP Server Bind Address port 13
browser
C cache
canceldatastoreoperation 56 checkdatastoreoperationstatus 56
client connections
forcing disconnect 20 viewing 20
canceldatastoreoperation 56 checkdatastoreoperationstatus 56
forcelogoutswithfile 59 getlogins 59
password 54 properties files 54
- 71 -
setautostart 63 setbackupdirectory 63 setlogdirectory 63 setlogginglevel 63
command line administration tool 53
conflicts
D datastore
directory
disabling
E
F
FontLink
G
I installation
J
L
locking server administration 19
backup settings 11 log location 11
M
O
opening
Server Administration application 9
other font managers
P
ports 12 client connection 12 external 12
internal server communication 13 resolving conflicts 13
- 72 -
Users and Workgroups Administration 12
R
removing
repository
S
server
Server Administration application 9
setautostart 63 setbackupdirectory 63 setlogdirectory 63 setlogginglevel 63
T
U uninstalling
Universal Type Client
cache 26 system requirements 26
V vault
viewing server settings
W
- 73 -
ಡೌನ್ಲೋಡ್ ಮಾಡಿ
ಸಾರ್ವಜನಿಕ ಲಿಂಕ್ ನವೀಕರಿಸಲಾಗಿದೆ
ನಿಮ್ಮ ಚಾಟ್ಗೆ ಸಾರ್ವಜನಿಕ ಲಿಂಕ್ ಅನ್ನು ನವೀಕರಿಸಲಾಗಿದೆ. You may view and manage your chat links after registration here.
ದಾಖಲೆಯ ಸಾರ್ವಜನಿಕ ಲಿಂಕ್
ಜಾಹಿರಾತು
