In Quark choose the Edit menu and click on Preferences. When the dialog box appears,
select PDF and choose direct to PDF and then select "OK". Use the following screen
captures as your guide for creating a PDF from Quark.
(If you don't own Acrobat Distiller, please give us a call so we can give you
instructions on saving PostScript files.)
PDF
1. Select Print from the File menu. For the printer, select Adobe PDF, and under Device
Options the PPD should also be Adobe PDF. Click on Device and adjust the width and
height to measure 1” larger than your actual document size. The example shown below is
for an 8.5” x 11” page. Select 100% (unless reducing to a specific size) and centered.
DEVICE
2. Select Pages then match the settings as shown below.
PAGES
3. Select Color use Composite CMYK for 4 color process jobs, but if you need to include
a spot color, change the setup to Composite CMYK and Spot, then match settings as
shown below:
COLOR
4. Select Pictures, then match the settings as shown below:
PICTURES
2
5. Select Fonts, then match the settings as shown below:
FONTS
6. Select Marks, then match the settings as shown below:
MARKS
7. Select Bleed, then match the settings as shown below:
BLEED
3
8. Select OPI, then match the settings as shown below:
OPI
9. Leave Layers,Transparency, JDF and advanced option as default
10. Select the
4
button to save your PDF file.
">
