Jade Range JTRH-4-36 General Manual


Add to my manuals
2 Pages

advertisement

Jade Range JTRH-4-36 General Manual | Manualzz

®

TM

TITAN

FOUR OPEN BURNER RANGE

JTRH-4-36 with optional high riser.

DESCRIPTION:

Heavy duty open burner range, with oven below. To be model

#JTRH manufactured by Jade Range. Provided with four steel top grates. To have four 35,000 BTU/hr. cast iron open top burners controlled by infinite gas valves. One spill pan below all burners. To have 14 gauge all welded body with stainless steel front and sides. All gas tubing to be stainless steel throughout. To have 6" stainless steel adjustable legs.

SPECIFY BASE o STANDARD OVEN

To have conventional oven base with stainless steel lining. Oven sides and bottom to be removable without tools. Provide with two oven racks. Thermostat to adjust from 150°F to 550°F with

35,000 BTU burner. Oven interior 28-1/4" W x 14" H x 27-3/4" D.

o CONVECTION OVEN

To have convection base with 14 gauge stainless steel interior.

Provide with two oven racks. Thermostat to adjust from 150°F to

550°F with 30,000 BTU burner. Provide with 1/4 HP 115/60/1 blower motor. Oven interior 28" W x 13-3/4" H x 24-1/2" D.

SPECIFY TYPE OF GAS WHEN ORDERING.

SPECIFY ALTITUDE WHEN ABOVE 2,000 ft.

MODEL NO.

o o

jtrh-4-36 jtrh-4-36c

DESCRIPTION

4 open burners with oven

4 open burners with convection oven

STANDARD FEATURES

• Four individual lift-off steel top grates

• Four 35,000 BTU/hr cast iron open burners

• Variable size multi-point gas connection—see utility information for details

• One stainless steel pilot per burner

• 14 gauge all welded body construction

• Stainless steel oven interior (bottom and sides removable without tools on standard oven)

• Two chrome plated oven racks (wires curled and welded around main frame with no sharp ends)

• Oven control located in cool zone

• Stainless steel gas tubing throughout

• Stainless steel front, sides and stub back

• Stainless steel adjustable 6" legs

• Stainless steel tray bed

• Stainless steel 6" plate shelf

• 3/4" gas regulator (shipped loose, must be installed for proper operation)

AVAILABLE OPTIONS o Stainless steel high riser o Stainless steel double high riser o Stainless steel high shelf o Stainless steel double high shelf o Stainless steel tubular high shelf o Stainless steel tubular double high shelf o Common plate shelf with Item(s) Model(s) o Cap and cover manifold. Left o Right o

ACCESSORIES o 6" casters, front two locking (5" diameter wheel) o 36" flex hose with quick disconnect (3/4" connection) o 48" flex hose with quick disconnect (3/4" connection) o 1" gas pressure regulator (specify gas type) o 1-1/4" gas pressure regulator (specify gas type) o Additional oven rack (two supplied with range)

WWW.JADERANGE.COM

JADE RANGE, LLC., A MIDDLEBY COMPANY • 2650 Orbiter Street • Brea, CA 92821 • PHONE: 800-884-5233 FAX: 714-961-2550

Note: In line with their policy to continually improve products, Jade reserves the right to change materials and specifications without notice.

printed in usa form #jt0501 ©2008 jade range, llc

®

TM

TITAN

FOUR OPEN BURNER RANGE

36" [914]

2 1/2" [64]

REAR GAS

CONNECTION

model jtrh-4-36 jtrh-4-36c

Jade Range

2 1/2" [64]

REAR GAS

CONNECTION

6" [152]

btus

175,000

170,000

18" [457]

36" [914]

[ ] = MILLIMETERS

width

36"

36"

4" [102]

8 1/2" [216]

38" [965]

11" [279]

DOUBLE DECK SHELF

66 1/2" [1689]

13" [330]

SINGLE DECK SHELF

55" [1397]

6" [152]

30 1/2" [775]

24 3/8" [619]

3" [76]

6" [152]

20 1/2" [521]

REAR GAS CONNECTION

1 1/4" [32] MANIFOLD

1 1/2" [38]

2" [51]

BLOWER MOTOR FOR

CONVECTION OVEN ONLY

STUB BACK

34 3/4" [883]

CLEARANCE

1" [25]

6" [152]

10" [254]

CURB

34" [864]

115v. 60c. ELECT. SUPPLY CORD (9 FT. LONG)

CONVECTION OVEN ONLY

depth

38"

38" height see drawing see drawing appx. shp. wt.

680 lbs.

730 lbs.

CONVECTION OVEN ONLY:

• Power Supply: 115/60/1 - 6 foot cord with 3 prong plug

• Total maximum amps 4.0/oven

• Electronic Spark Ignitor: activated by power switch, ignites standing pilot

• Fan Switch: three positions, on for normal operation, on for quick cool down, off.

NOTE: SPECIFY TYPE OF GAS WHEN ORDERING.

UTILITY INFORMATION:

• Ranges are supplied with 1-1/4" front manifold connection and a 1" or 3/4" capped rear manifold connection. For rear manifold connection, remove cap. Ranges are supplied with 3/4" gas pressure regulator. For 1-1/4" or 1" gas pressure regulator, see accessories. (Specify required front manifold cap and cover when ordering.)

• Required operating pressure:

Natural Gas 5" W.C. minimum

Propane Gas 10" W.C. minimum

14 " W.C. maximum

Note: This unit must be connected with the gas appliance regulator supplied.

WWW.JADERANGE.COM

JADE RANGE, LLC., A MIDDLEBY COMPANY • 2650 Orbiter Street • Brea, CA 92821 • PHONE: 800-884-5233 FAX: 714-961-2550

Note: In line with their policy to continually improve products, Jade reserves the right to change materials and specifications without notice.

printed in usa form #jt0501 ©2008 jade range, llc

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Frequently Answers and Questions

What are the dimensions of the Jade Range JTRH-4-36?
The dimensions of the Jade Range JTRH-4-36 are 36 inches wide, 38 inches deep, and has a height that varies depending on the configuration.
What type of burners does the Jade Range JTRH-4-36 have?
The Jade Range JTRH-4-36 has four 35,000 BTU/hr cast iron open burners.
What type of oven does the Jade Range JTRH-4-36 have?
The Jade Range JTRH-4-36 is available with either a standard oven or a convection oven.
What are the features of the standard oven on the Jade Range JTRH-4-36?
The standard oven on the Jade Range JTRH-4-36 has a stainless steel interior, two chrome-plated oven racks, a thermostat that adjusts from 150°F to 550°F, and a 35,000 BTU burner.
What are the features of the convection oven on the Jade Range JTRH-4-36?
The convection oven on the Jade Range JTRH-4-36 has a 14-gauge stainless steel interior, two oven racks, a thermostat that adjusts from 150°F to 550°F, a 30,000 BTU burner, and a 1/4 HP 115/60/1 blower motor.
What are the gas connection requirements for the Jade Range JTRH-4-36?
The Jade Range JTRH-4-36 requires a variable size multi-point gas connection with a minimum pressure of 5" W.C. for natural gas and 10" W.C. for propane gas.

advertisement