Clinical Review Monit ors

Future Focused

   EIZO’s complete spectrum of RadiForce medical monitor solutions delivers

 exceptionally accurate and stable image display at leading hospitals around the world.

          Our commitment to technological innovation includes making products

  that are as ergonomically, environmentally, and economically-friendly as possible.

    With the shift to completely filmless systems for improved efficiencies in patient care,

  EIZO will continue to provide products of unsurpassed quality, consistency,

       and value that are truly future focused.

Selecting the Optimum Monitor for Clinical Review

Display Differs Depending Upon Grayscale Tones

Standard monitors for general office use have grayscale tone characteristics which may vary even between the same models. In the medical field, monitors must display medical images accurately and consistently. Digital

Imaging and Communications in Medicine (DICOM) Part 14 specifies a display function for grayscale which is now used as a standard to adjust the grayscale tone characteristics of monitors used in the medical field.

Different Grayscale Tones Medical Image

Gamma 2.2

DICOM Part 14

Log-Linear

CIE

Grayscale Tones

Monitor A Monitor B

Same Image Looks Different.

Cost - Efficiency Demanded Under Clinical Review Applications

Medical images can now be reviewed with clinical record applications. However, it is costly for hospitals to install high-performance, DICOM calibration compatible medical display monitors throughout the entire hospital, and a cost-efficient solution is demanded for clinical review application usage environment.

High-Performance

Medical Display Monitor

Cost - Efficient

Clinical Review Monitor

Calibration to the DICOM Part 14 Compliant and

Superior Cost Performance Monitor is Optimum for Clinical Review

With the bundled RadiCS LE quality control software installed, a self-diagnosis function using a built-in backlight sensor periodically checks for brightness irregularities of RadiForce MX-Series monitors.

Furthermore, the self-calibration function is set with the scheduling function. Simplified calibration compliant with the DICOM Part 14 standard is periodically performed to correct the grayscale tones and brightness of the monitor. Superior cost performance will be achieved when installing a large number of monitors compliant to

DICOM Part 14 in clinical review application usage environment.

DICOM Part 14

Grayscale Tones

Grayscale

Grayscale

Self -

Calibration

Brightness

Grayscale

03

76 cm （ 29.8" ） Color LCD Monitor 61 cm（ 24.1" ） Color LCD Monitor

61 cm（ 24.1" ） Color LCD Monitor

56 cm（ 22" ） Color LCD Monitor

The RadiForce MX-Series of cost performance clinical review monitors deliver calibration that is compliant with DICOM Part 14.

Ideal for viewing patient charts with MRI and CT medical images in DICOM Part 14 standard.

Widescreen and square formats in various resolutions to meet the diverse needs of hospitals.

54 cm（ 21.3" ） Color LCD Monitor

Clinical Review Monitors

48 cm（ 19" ） Color LCD Monitor

43 cm（ 17" ） Color LCD Monitor

06

Feature

High-Definition Images

DICOM Part 14 Compliant

To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tones on the production line to produce a monitor compliant with DICOM Part 14.

10-bit Color

Each RGB color is supported with a 10-bit input compatibility that displays more than 1 billion colors, providing smooth color tones for

3D color rendering and image fusion.

10-bit color graphics board and viewer software needed for 10-bit color display.

Simplified Calibration

When the self-diagnosis function, utilized with bundled RadiCS LE quality control software, detects a change in luminance, a warning icon appears on the desktop taskbar enabling prompt correction.

Furthermore, the self-calibration function, a simplified calibration compliant with the DICOM Part 14 standard, can periodically be performed to correct the grayscale tones and brightness of the monitor.

8-bit RGB

Displayed Image Displayed Image

10-bit RGB

Brightness Uniformity

The Digital Uniformity Equalizer (DUE) function provides optimum backlight luminance uniformity which is difficult to attain due to t h e characteristics of LCD monitors, especially with larger screen sizes.

Without DUE With DUE

Normal Warning

4 Megapixel Bezel-Less Widescreen

Displaying 4 megapixel information volume on one monitor improves your working efficiency and cost performance. No bezels in between requires less eye movement with less stress as compared with dual 2

MP monitors.

Brightness Stabilization

At startup or upon wakeup, the EIZO patented drift correction function quickly stabilizes the brightness level. In addition, a sensor measures the backlight brightness and compensates for brightness fluctuations caused by the ambient temperature and the passage of time.

This brightness stabilization function is EIZO patented technology

(Japan patent numbers 3171808 and 3193315, US patent number 6188380).

Brightness

With Brightness stabilization

Preset Value

Main Board

Without Brightness stabilization

Backside of Panel

Hole for

Light

Transmission

Minutes

Backlight

Sensor

Bezel-Less

Widescreen

The widescreen 16:10 aspect ratio provides significantly more horizontal space than the 4:3 or 5:4 aspect ratios of conventional square monitors. The screen is wide enough so that you can keeep tool palettes open without covering the window you’re working on.

Square Wide Square Wide

Ergonomic Features

Calibration Mode Selection

Selectable with the front panel buttons, the CAL Switch function allows for various calibration modes of different modalities such as

CR, CT, and endoscope images. Furthermore, auto mode settings can be made with the Auto CAL Switch function.

Height Adjustable Stand

The height and tilt adjustable stand offers added flexibility and viewing comfort. 90° pivot for portrait mode gives you versatility with images or applications requiring more vertical viewing space.

Graphics board that supports portrait mode is required for vertical viewing.

[ MX300W Usage Example ]

New FlexStand

The highly-versatile FlexStand offer tilt, swivel, height adjustment, and also portrait rotation and laptop-like screen placement which can adjust to any clinical review environment.

[ MX240W Usage Example ]

30°

90°

Backlight Saver with Screen Saver

With ScreenManager Pro for Medical utility software installed, the

Backlight Saver function turns off the monitor ’s backlight when the screen saver is activated, and turns it on again when the computer comes out of screen saver mode. This function helps to reduce power consumption when the monitor is used for a prolonged period of time.

Screen saver activated

18 hours

/ day

16 hours

/ day

2 hours

Cuts power consumption by 11% Backlight stays on

Without Backlight Saver With Backlight Saver

174mm 344°

DisplayPort Connectivity

Next-generation DisplayPort connectivity allows signal information transmission via a single, high-bandwidth cable at distances up to 15 meters without any signal degradation.

High Quality Assurance

Backlight Saver with Viewer Application

By setting the Backlight Saver function to operate with viewer application, the monitor’ s backlight is on while the viewer is being used and the backlight is off while the viewer is not being used.

Medical Standards

Meets the strictest medical, safety and EMC emissions standards including TÜV/GM, UL60601-1, CE, CB, CSA C22.2 No.601-1,

VCCI, FCC, and FDA 510(k).

Cuts power consumption

5 Year Warranty

EIZO and its authorized distributors offer a five-year limited warranty.

Viewer in use Viewer not in use

07

Quality Control Solutions

More Precise Calibration with UX1 Sensor

By using the UX1 sensor (sold separately) with the bundled RadiCS LE software, more precise calibration compliant with the DICOM Part 14 standard can be performed.

Centralized Management of All Monitors

RadiNET Pro (sold separately) enables centralized management of calibration tasks, history data of multiple RadiCS clients via a network, and remote QC functions.

Clip-On Swing Sensor

Easy calibration compliant with the DICOM Part 14 standard can be performed with the Clip-On Swing Sensor G2 (sold separately).

Once attached to the top of the monitor, it can remain in place and is ready for use. This saves the time and trouble of attaching and removing it when performing QC tasks.

Presence Sensor for Convenience

The presence sensor on the front of the Clip-On Swing Sensor G2 determines whether to start QC tasks such as calibrations automatically at scheduled times. If the user is working, the QC task stays in stand-by mode, and when the user is away from the monitor the task is performed.

Monitor Quality Control Standards Compliance

Quality control tool RadiCS UX1 (sold separately) enables you to perform basic quality checks necessary for clinical review monitors.

In addition, high-performance calibration compliant with the

DICOM Part 14 standard corrects the fluctuation in monitor quality.

QC task in stand-by mode while seated

QC task performed while away

Presence Sensor for Power Savings

The presence sensor feature unites convenience with savings by ensuring that the monitor conserves power when it is not in use. The presence sensor prompts the monitor to switch to power save mode when it detects the user away from the monitor, and then resume normal operation when the user returns.

Environment Awareness

EIZO Eco Products — A Commitment to Environmental Preservation over the Product Life Cycle energy savings, EIZO has introduced four versions of this label with EIZO Eco Products 2009 being the most recent.

EIZO Eco Products 2009 Requirements

1)

2)

3)

4)

5)

6)

7)

User’s manual made with chlorine-free, recycled paper.

Subject to an internal product environmental assessment.

Partial use of recycled plastic.

Partial use of soy ink with supplied printed materials.

Use or partial use of plastic containing raw plant materials.

Use of recycled Styrofoam or paper in packaging cushioning materials.

Meets VOC (volatile organic compounds) guidelines for

PCs as established by JEITA*.

8)

9)

10)

11)

12)

Complies with the RoHS directive.

Power consumption of zero watts when turned off.

Power consumption of less than 1.5 watts in power-save mode.

Satisfy the requirements of the International Energy Star Program when in normal operation.

Eco profile available on website.

Previous versions of this label are EIZO Eco Products 2006 which covers the first eight requirements.

*JEITA is the Japan Electronics and Information Technology Industries Association. JEITA established guidelines to limit emission levels of VOCs from PCs. The guidelines are a countermeasure against health hazards caused by VOC contaminants released from furniture, everyday objects, and building materials that accumulate indoors. EIZO carries out evaluations based on these guidelines.

Flexible Arm

LA-131-D

Wall Mount Arm

LA-030-W LA-011-W

Accessory Compatibility

Dual Height

Adjustable Stand

LS-HM1-D

Panel Protector

PANEL PROTECTOR

Switch to power save at user’ s absence

Screen activates at user’ s presence

(MX300W-C :Built-In Panel Protector)

FP - 2400W

FP - 2202W

FP -2101

FP - 702

FP - 505

Monitor Cleaning Kit

09

Specifications

10

76 cm ( 29.8" ) Color LCD Monitor 61 cm ( 24.1" ) Color LCD Monitor 61 cm ( 24.1" ) Color LCD Monitor 56 cm ( 22" ) Color LCD Monitor

Model Variations

Cabinet Color

Panel

Active Display Size (H × V)

Viewable Image Size

Native Resolution

Pixel Pitch

Display Colors

Viewing Angles (H, V)

Brightness

Contrast Ratio

On/Off Response Time

Midtone Response Time

1

Scanning Frequency (H, V)

Dot Clock

Input Signals

Sync Formats

Input Terminal

MX300W : without Panel Protector

MX300W-C : with Panel Protector

Black

TFT Color LCD Panel (VA)

641.3 x 400.8 mm

-

Black, Gray

TFT Color LCD Panel (IPS)

518.4 x 324.0 mm

Diagonal : 611 mm

178°, 178°

MX300W : 300 cd/m 2 (typical),

MX300W-C : 265 cd/m 2 (typical)

1000 : 1 (typical)

178°, 178°

320 cd/m 2 (typical)

1000 : 1 (typical)

13 ms (typical) 12 ms (typical)

6 ms (typical) 5 ms (typical)

Digital : 31 - 100 kHz, 25.5 - 61 Hz (VGA

Text : 69 - 71 Hz)

Frame synchronous mode : 59 - 61 Hz

Digital : 31 - 76 kHz, 59 - 61 Hz (VGA Text :

69 - 71 Hz)

Analog : 24 - 76 kHz, 49 - 86 Hz (1600 x 1200 :

76 Hz, 1920 x 1200 : 61 Hz)

Frame synchronous mode : 59 - 61Hz

-

Black

TFT Color LCD Panel (VA)

518.4 x 324.0 mm

Diagonal : 611 mm Diagonal : 756 mm

2560 x 1600

0.2505 x 0.2505 mm

1920 x 1200

0.270 x 0.270 mm

1920 x 1200

0.270 x 0.270 mm

10-bit colors : 1.07 billion (maximum) colors

8-bit colors : 16.77 million from a palette of

8.50 billion colors

10-bit colors Display Port : 1.07 billion

(maximum) colors

8-bit colors : 16.77 million from a palette of

68 billion colors

16.77 million from a palette of 1.06 billion colors

178°, 178°

320 cd/m 2 (typical)

850 : 1 (typical)

16 ms (typical)

6 ms (typical)

MX220W-H : Height Adjustable Stand

MX220W-FS : FlexStand

Black

TFT Color LCD Panel (VA)

473.7 x 296.1 mm

Diagonal : 558 mm

1920 x 1200

0.247 x 0.247 mm

10-bit colors Display Port : 1.07 billion

(maximum) colors

8-bit colors : 16.77 million from a palette of

68 billion colors

178°, 178°

350 cd/m 2 (typical)

1200 : 1 (typical)

12 ms (typical)

6 ms (typical)

Digital : 31 - 76 kHz, 59 - 61 Hz (VGA Text:

69 - 71 Hz)

Analog : 24 - 94 kHz, 49 - 86 Hz (1600 x 1200 :

76 Hz, 1920 x 1200 : 61 Hz)

Frame synchronous mode : 59 - 61 Hz

Digital : 31 - 76 kHz, 59 - 61 Hz (VGA Text :

69 - 71 Hz)

Analog : 24 - 76 kHz, 49 - 86 Hz (1600 x 1200 :

61 Hz, 1920 x 1200 : 61 Hz)

Frame synchronous mode : 59 - 61 Hz

Digital : 269 MHz

DVI 1.0

Digital : 162 MHz, Analog : 170 MHz

Digital : DVI 1.0, DisplayPort 1.1a,

Analog : RGB Analog

Separate, Composite -

DVI-D 24 pin x 2 (Dual Link supported by

Signal 1 only)

Digital / Analog : DVI-I 29 pin x 2

Digital : DisplayPort x 1

1 upstream, 2 downstream

Rev. 2.0

AC 100 - 120 V, 200 - 240 V : 50 / 60 Hz

170 watts

Less than 2 watts

Backlight Sensor

1 upstream, 2 downstream

Rev. 2.0

AC 100 - 120 V, 200 - 240 V : 50 / 60 Hz

95 watts

Less than 0.9 watts

Backlight Sensor

Digital : 162 MHz, Analog : 202.5 MHz

Digital : DVI 1.0,

Analog : RGB Analog

Separate, Composite

DVI-I 29 pin x 2

1 upstream, 2 downstream

Rev. 2.0

AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz

110 watts

Less than 2 watts

Backlight Sensor

Digital : 162 MHz, Analog : 170 MHz

Digital : DVI 1.0, DisplayPort 1.1a,

Analog : RGB Analog

Separate, Composite

Digital / Analog : DVI-I 29 pin x 2

Digital : DisplayPort x 1

1 upstream, 2 downstream

Rev. 2.0

AC 100 - 120 V, 200 - 240 V : 50 / 60 Hz

90 watts

Less than 0.9 watts

Backlight Sensor

USB Ports

USB Standard

Power Requirements

Power Consumption

Power Save Mode

Sensor

Power Management

OSD Languages

Digital : DVI DMPM Digital : DVI DMPM, Analog : VESA DPMS Digital : DVI DMPM, Analog : VESA DPMS

English, German, French, Italian, Japanese,

Simplified Chinese, Spanish, Swedish,

Traditional Chinese

English, German, French, Italian, Japanese,

Simplified Chinese, Spanish, Swedish,

Traditional Chinese

English, German, French, Italian, Japanese,

Simplified Chinese, Spanish, Swedish,

Traditional Chinese

English, German, French, Italian, Japanese,

Simplified Chinese, Spanish, Swedish,

Traditional Chinese

10.4 kg / 7.4 kg

Digital : DVI DMPM, Analog : VESA DPMS

9.6 kg / 6.6 kg Net Weight (With Stand / Without

Stand )

MX300W 15.7 kg, MX300W-C 16.4 kg /

MX300W 11.2 kg, MX300W-C 11.9 kg

VESA standard 100 x 100 mm Hole Spacing

Certifications and Standards

10.7 kg / 7.1 kg

VESA standard 100 x 100 mm

CE (Medical Device Directive), TÜV/GM

(EN60601-1), cTÜVus (UL60601-1, CSA-C22.2

No.601-1), CB (IEC60601-1), VCCI-B, FCC-B,

Canadian ICES-003-B, c-Tick, FDA 510(k)

2

,

EIZO Eco Products 2006, RoHS

CE (Medical Device Directive), TÜV/GM

(EN60601-1), cTÜVus (UL60601-1, CSA-C22.2

No.601-1), CB (IEC60601-1), VCCI-B, FCC-B,

Canadian ICES-003-B, c-Tick, FDA 510(k)

2

,

EIZO Eco Products 2009, RoHS

VESA standard 100 x 100 mm

CE (Medical Device Directive), TÜV/GM

(EN60601-1), cTÜVus (UL60601-1, CSA-C22.2

No.601-1), CB (IEC60601-1), VCCI-B, FCC-B,

Canadian ICES-003-B, c-Tick, FDA 510(k)

EIZO Eco Products 2006, RoHS

2

,

VESA standard 100 x 100 mm

CE (Medical Device Directive), TÜV/GM

(EN60601-1), cTÜVus (UL60601-1, CSA-C22.2

No.601-1), CB (IEC60601-1), VCCI-B, FCC-B,

Canadian ICES-003-B, c-Tick, FDA 510(k)

EIZO Eco Products 2009, RoHS

2

,

Supplied Accessories

Warranty

AC power cord, Dual-Link signal cable (DVI-D

~ DVI-D), signal cable (DVI-D ~ DVI-D), USB cable, EIZO LCD Utility Disk (user's manual,

RadiCS LE, ScreenManager Pro for Medical),

ScreenCleaner (MX300W-C only), warranty card

AC power cord, signal cables (DVI-D ~ DVI-D,

DVI-I ~ D-Sub mini 15 pin), USB cable, EIZO

LCD Utility Disk (user's manual,RadiCS LE,

ScreenManager Pro for Medical), warranty card

AC power cord, signal cables (DVI-D ~ DVI-D,

DVI-I ~ D-Sub mini 15 pin), USB cable, EIZO

LCD Utility Disk (user's manual, RadiCS LE,

ScreenManager Pro for Medical), warranty card

AC power cord, signal cables (DVI-D ~ DVI-D,

DVI-I ~ D-Sub mini 15 pin), USB cable, EIZO

LCD Utility Disk (user's manual, RadiCS LE,

ScreenManager Pro for Medical), warranty card

Five Years Five Years Five Years Five Years

Dimensions [Unit : mm ]

Swivel

Height

Adjustment

118

689

643.3

Pivot

90°

51

90

Tilt

40°

57

254.7

85

56.3

Tilt

40°

566

520.4

Height Adjustment 82

Pivot

90°

85

56.3

Tilt

40°

MX220W-H：

511

475.8

Height Adjustment 82

Pi vot

90°

53.8

85

Tilt

40°

MX220W-FS ：

35°

172

°

35°

172

°

405.6

402.8 450

566

520.4

Height Adjustment 82

Pi vot

90°

399.5

30.4

230

325.5

20.7

208.5

20

325 208.5

MX220W-FS : Dimensions (With Stand) :

511 (W) x 347.5 - 521.5 (H) x 235.5 (D) mm,

Height Adjustment 174 mm, Pivot 90°, Tilt 30°

1 Average response time measured between each grayscale level of 31, 63, 95, 127, 159, 191, and 223. 2 Display of mammography images for diagnosis is not supported.

54 cm ( 21.3" ) Color LCD Monitor 48 cm ( 19" ) Color LCD Monitor 43 cm ( 17" ) Color LCD Monitor

Model Variations

Black, Gray

TFT Color LCD Panel (VA)

432.0 x 324.0 mm

Diagonal : 540 mm

1600 x 1200

0.270 x 0.270 mm

16.77 million from a palette of 1.06 billion colors

Black, Gray

TFT Color LCD Panel (VA)

376.3 x 301.0 mm

Diagonal : 481 mm

1280 x 1024

0.294 x 0.294 mm

16.77 million from a palette of 8.50 billion colors

Black, Gray

TFT Color LCD Panel (VA)

337.9 x 270.3 mm

Diagonal : 432 mm

1280 x 1024

0.264 x 0.264 mm

16.77 million from a palette of 1.06 billion colors

Cabinet Color

Panel

Active Display Size (H × V)

Viewable Image Size

Native Resolution

Pixel Pitch

Display Colors

178°, 178°

300 cd/m 2 (typical)

178°, 178°

300 cd/m 2 (typical)

178°, 178°

250 cd/m 2 (typical)

Viewing Angles (H, V)

Brightness

1000 : 1 (typical)

16 ms (typical)

8 ms (typical)

Digital : 31 - 76 kHz, 59 - 61 Hz (VGA Text :

69 - 71 Hz)

Analog : 24 - 80 kHz, 49 - 76 Hz (1600 x 1200 :

61 Hz)

Frame synchronous mode : 59 - 61 Hz

Digital : 162 MHz, Analog : 162 MHz

Digital : DVI 1.0,

Analog : RGB Analog

Separate, Composite

DVI-I 29 pin x 1, D-Sub mini 15 pin x 1

2000 : 1 (typical)

20 ms (typical)

1500 : 1 (typical)

25 ms (typical)

8 ms (typical) -

Digital : 31 - 64 kHz, 59 - 61 Hz (VGA Text :

69 - 71 Hz)

Analog : 24.8 - 80 kHz, 50 - 75 Hz

Digital : 31 - 64 kHz, 59 - 61 Hz (VGA Text :

69 - 71 Hz)

Analog : 24.8 - 80 kHz, 50 - 75 Hz

Contrast Ratio

On/Off Response Time

Midtone Response Time

1

Scanning Frequency (H, V)

Digital : 108 MHz, Analog: 135 MHz

Digital : DVI 1.0,

Analog : RGB Analog

Separate

DVI-D 24 pin x 1, D-Sub mini 15 pin x 1

Digital : 108 MHz, Analog: 135 MHz

Digital : DVI 1.0,

Analog : RGB Analog

Separate

DVI-D 24 pin x 1, D-Sub mini 15 pin x 1

Dot Clock

Input Signals

Sync Formats

Input Terminal

1 upstream, 2 downstream

Rev. 2.0

AC 100 - 120 V, 200 - 240 V : 50 / 60 Hz

70 watts

1 upstream

Rev. 2.0

AC 100 - 120 V, 200 - 240 V : 50 / 60 Hz

43 watts

1 upstream

Rev. 2.0

AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz

33 watts

USB Ports

USB Standard

Power Requirements

Power Consumption

Less than 2 watts

Backlight Sensor

Digital : DVI DMPM, Analog : VESA DPMS

Less than 0.8 watts

Backlight Sensor

Digital : DVI DMPM, Analog : VESA DPMS

Less than 0.6 watts

Backlight Sensor

Digital : DVI DMPM, Analog : VESA DPMS

Power Save Mode

Sensor

Power Management

English, German, French, Italian, Japanese,

Spanish, Swedish

English, German, French, Italian, Japanese,

Simplified Chinese, Spanish, Swedish,

Traditional Chinese

English, German, French, Italian, Japanese,

Simplified Chinese, Spanish, Swedish,

Traditional Chinese

OSD Languages

9.7 kg / 6.7 kg

VESA standard 100 x 100 mm

CE (Medical Device Directive), TÜV/GM

(EN60601-1), cTÜVus (UL60601-1, CSA-C22.2

No.601-1), CB (IEC60601-1), VCCI-B, FCC-B,

Canadian ICES-003-B, c-Tick, FDA 510(k)

2

,

EIZO Eco Products 2006, RoHS

7.2 kg / 5.2 kg 5.9 kg / 3.9 kg Net Weight (With Stand / Without

Stand )

Hole Spacing VESA standard 100 x 100 mm VESA standard 100 x 100 mm

CE (Medical Device Directive), TÜV/GM

(EN60601-1), cTÜVus (UL60601-1, CSA-C22.2

No.601-1), CB (IEC60601-1), VCCI-B, FCC-B,

Canadian ICES-003-B, c-Tick, FDA 510(k)

2

,

EIZO Eco Products 2006, RoHS

TÜV/S, TÜV/Ergonomics (including ISO

13406-2), TÜV/GS, UL (cTÜVus), CSA

(cTÜVus), CE, c-Tick, CB, VCCI-B, FCC-B,

Canadian ICES-003-B, EIZO Eco Products

2006, RoHS

Certifications and Standards

AC power cord, signal cables (DVI-D ~ DVI-D,

D-Sub mini 15 pin ~ D-Sub mini 15 pin), USB cable, EIZO LCD Utility Disk (user's manual,

RadiCS LE, ScreenManager Pro for Medical), warranty card

AC power cord, signal cables (DVI-D ~ DVI-D,

D-Sub mini 15 pin ~ D-Sub mini 15 pin), USB cable, EIZO LCD Utility Disk (user's manual,

RadiCS LE, ScreenManager Pro for Medical), warranty card

AC power cord, signal cables (D-Sub mini 15 pin ~ D-Sub mini 15 pin, DVI-D ~ DVI-D),

USB cable, EIZO LCD Utility Disk (user's manual, RadiCS LE, ScreenManager Pro for

Medical), warranty card

Supplied Accessories

Five Years Five Years Five Years Warranty

Dimensions [Unit : mm ]

Swivel

Height

Adjustment

82

465

434

Pi vot

90°

38

64

Tilt

40°

325.5

42

208.5

Height

Adjustment

100

405

378.4

Pi vot

90°

38.5

Tilt

30°

61.5

320

50.3

205

Height

Adjustment

100

363

339.8

Pi vot

90°

36

Tilt

59

30°

320

50

205

MX220W-FS ：

35°

172

°

35°

172

°

11

All product names are trademarks or registered trademarks of their respective companies.

RadiCS and RadiNET are trademarks, and EIZO, RadiForce, and ScreenManager are registered trademarks of Eizo Nanao Corporation. Specifications are subject to change without notice.

Copyright © 2009 EIZO NANAO CORPORATION. All rights reserved. (091003) Printed in Japan, 10, 2009, 5K