optoNCDT ILR - Micro
More Precision.
optoNCDT ILR
Laser distance sensors
2
optoNCDT ILR: Compact laser distance sensors
Advantages optoNCDT ILR
- Non-contact distance measurement:
more than 300 m without reflector
more than 3000 m with reflector
- Excellent repeatability and linearity
- Short response time
- Compact sensor design
- Various interfaces
- Sighting laser for easy set up
- Excellent price-performance ratio
Laser distance sensors
Sensors in the optoNCDT ILR series are optoelectronic sensors for non-contact displacement, distance and also speed measurement.
The large measuring range of the laser distance
sensors enables measurements on critical
surfaces such as, e.g. hot metal, from a safe
distance or the regulation of large travel displacements with a small installation size. Measurements without wear and thus a long service
life are made possible due to the non-contact
measurement technique. Depending on the
application, there are four series available with
different focuses on accuracy and measuring
speed. The sensors are designed for operation with and without reflector and are thus very
flexible to use. Due to their robust construction
and compact design, the ILR sensors are used
indoors and outdoors for many different measurement tasks, both for static as well as moving
measurement objects. The exact positioning of
the sensor can be performed easily due to the
switchable sighting laser.
P
laser diode
refererence diode
photo diode
tstart
time
tstop
t
Time of flight measurement principle
Phase comparison measuring principle
The ILR102x, 110x, 115x, and 119 x sensors
operate according to the time of flight measurement principle. A laser diode in the sensor produces short laser pulses which are projected
onto the target. The light reflected from the target is recorded by the sensor element. The time
of flight of the light pulse to the target and back
determines the measurement distance. The integrated electronics in the sensor derives the
distance using the time of flight and conditions
the signal for the analogue and digital output.
Sensors using this principle are not sensitive to
external light.
The ILR118x sensors operate according to the
phase comparison principle. High frequency
modulated laser light with low amplitude is
transmitted to the target. Depending on the distance of the object, the distance changes the
phase relationship between transmitted and
received signal. Sensors using this principle
operate with high accuracy for measurement
distances up to 150 metres.
3
Page 6-7
ILR 1020/1100/1150
CompaCt & FAST
Measuring ranges 0.2 ... 10 m
Linearity ±8 ... ±40mm
Repeatability ±4 ... ±10mm
Resolution from 0.1mm
Fast response time
Interface RS422 / SSI
Analog output 4 ... 20 mA
Compact sensor design
Sensor configuration via touch keys
IP67
Measuring range without reflector
0.1 m
1m
10 m
Measuring range with reflector
100 m
1000 m
0.1 m
1m
10 m
100 m
1000 m
10000 m
1000 m
10000 m
Page 8-9
ILR 1021/1101/1151
CompaCt & FAST (RefleCtor)
Measuring ranges 0.2 ... 250m
Linearity ±3 ... ±60mm
Repeatability ±2 ... ±10mm
Resolution from 0.1mm
Fast response time
Interface RS422 / SSI
Analog output 4 ... 20 mA
Compact sensor design
Sensor configuration via touch keys
IP67
Measuring range without reflector
0.1 m
1m
10 m
Measuring range with reflector
100 m
1000 m
0.1 m
1m
10 m
100 m
Page 10-11
ILR 1181/1182/1183
industriAL Standard with high precision
Measuring ranges 0.1 ... 150 m
Linearity ±2 ... ±5mm
Repeatability <0.5mm
Resolution 0.1mm
Measurement with and without reflector
Measuring range without reflector
0.1 m
1m
10 m
Interface RS232 / RS422 / SSI / Profibus
Analog output 4 ... 20 mA
Integrated heating (option)
Small spot diameter
IP65
Measuring range with reflector
100 m
1000 m
0.1 m
1m
10 m
100 m
1000 m
10000 m
Page 12-13
ILR 1191
high-performance sensor
Measuring ranges 0.5 ... 3000m
Linearity ±20 ... ±60mm
Repeatability <20mm
Resolution 1mm
Measurement with and without reflector
Distance and speed measurement
Measuring range without reflector
0.1 m
1m
10 m
Interface RS232 / RS422 / SSI / Profibus
Analog output 4 ... 20 mA
High measuring rate
With integrated heating
IP67
Measuring range with reflector
100 m
1000 m
0.1 m
1m
10 m
100 m
1000 m
10000 m
4
Applications
Controlled opening of gates and doors
optoNCDT ILR distance sensors monitor the opening positions of doors and
gates. Apart from the linear measurement, the two switching outputs also
enable a switching acquisition of certain positions (e.g. „Door open/closed“) to
be employed with just one sensor.
Positioning of automotive parts
In car production the positions of the trunk lid and engine hood are acquired with
laser propagation time sensors. If they are completely open, the assembly robot is
put into motion for further assembly steps.
Classification and sorting on conveyors
A number of horizontally and also vertically mounted laser probes measure
items in three dimensions. These are classified based on their size and then
sorted.
Landscape scan with helicopters
In addition to the camera, optoNCDT ILR sensors for the height determination of
the helicopter are used for the profile measurement of landscapes.
Speed measurement in the crash test
During the acceleration of vehicles in the crash test, an ILR1191 measures the
impact speed and the deformation of the test vehicle.
5
Distance measurement on monorail conveyors
In automotive production lines car parts are transported by monorail
conveyors. To control the flow of production and to prevent damage
to the parts, the spacing between the conveyors is monitored.
Position measurement on gantry cranes
Numerous measurement tasks on gantry cranes must be performed: Positioning
of the trolley, detection and dimensioning of containers and monitoring of
the minimum clearance between the cranes. The ILR1191 with a very large
measuring range and low response time is designed for these measurement
tasks.
Acquisition of coil diameters
The quantities of steel, paper and fabric wound on and off are
monitored via the acquisition of coil diameters using laser probes.
Level measurement in container, tanks and silos
Depending on the accuracy demanded, the filling level of silos is found at
up to four points. The level is determined from these distances.
Position acquisition of gantry cranes and storage and retrieval units
Fast response time in combination with high measurement accuracy facilitate
the exact positioning of storage and retrieval units.
Compact and fast distance sensors (no reflector)
ILR 1020/1100/1150
Advantages
- Measuring range up to 10 m on diffuse
reflecting targets
- Short response time
- Excellent price-performance ratio
- Fast sensor set configuration via touch keys
Gaging sensors of the series optoNCDT
1020/1100/1150 are designed for non-contacting measurements at distances of up to
10 m. These measurements are required for
position determination, attendance checking,
type classification and for machine control in
numerous fields of application.
QA
S1
PWR SLOW
0% analog
inv.
QB
81.5
8
5.
21
42
42
optoNCDT
S1
inv.
S2
S2
S
ESC
T
ILR1020: Limit switch programming via touch keys
9.5
43
ILR1100/ILR1150: Limit switch programming via software
5.75
Precise sensor alignment
The aiming laser can be turned on for accurate
alignment of the sensor with the measurement
object. For mounting the sensor a mounting
bracket and a fine adjuster are available as accessories, which simplify the precise alignment
of the sensor to the measurement object.
94.5
20
6
7
Model
black 6%
Measuring range
ILR1020-6
ILR1100-6
ILR1150-10
0.2 ... 2.5m
0.5 … 2m
0.5 … 3m
grey 10%
0.2 ... 6m
0.5 m … 4m
0 5 … 7m
white 90%
0.2 ... 6m
0.5 m … 6m
0.5 … 10m
Linearity
±40mm
±10mm
±8mm
Resolution
1 ... 5mm
0.1mm
0.1mm
±5mm
±4mm
12ms
12ms
Repeatability
±10 / ±15mm
Response time
Laser class
1)
80 / 13ms 1)
measuring laser
IR 905 nm, laser class 1
IR 900 nm, laser class 1
sighting laser
red 650 nm, laser class 2
Operation temperature
-10° … +50° C (-20° … +50° C in continous operation)
Storage temperature
-30° … +75° C
Limit outputs
QA / QB (max. 100 mA)
Switching points
free adjustable (teach in)
Switching hysteresis
adjustable in 1-mm-steps
30mm
min. 20mm (adjustable)
min. 10mm (adjustable)
Plausibility output
-
QP (max. 50 mA)
Service output
-
QS (max. 50 mA)
Serial interface
-
RS422 (2 9ms at 57.6kBaud)
SSI - compatible (GRAY / BINÄR adjustable) (SSI cycle 80μs)
Bus interface
-
Profibus or DeviceNet via respective gateway (accessory)
Analog output
4 - 20mA
Temperature stability
<1.2mm / °C
<0.5mm / °C
Supply
18 - 30 VDC
Max. consumption
<3W at 24V
Connection
5-pin connector M12
12-pin connector M16
Protection class
IP 67
Material (housing)
ABS shock resistant
Vibration
EN 60947-5-2
Shock
EN 60947-5-2
Weight
<±5mm absolute
10 - 55 Hz, amplitude 1.5mm, period 5 min. at resonant frequency or 55 Hz, stress time 30 min. per axis
acceleration 30 g, pulse duration 11 ms, half sinusoid, 3 shocks/axis
appr. 200 g
appr. 230 g
Accessoires
page 14 - 15
All data regarding accuracy and distance are based on the specified surface
at constant ambient conditions and with a minimum operating time of 15 minutes.
1)
slow/fast
Operating Mode
Laser Class 1 (Infrared)
Setup Mode
Laser Class 2 (Visible - Red)
Do not stare into beam
Spot diameter ILR1020
4 x 7mm
3 x 10mm
4 x 12mm
2m
4m
8m
p
max
EN 60825-1. 10/2003
optoNCDT ILR 1020/1100/1150 use a
semiconductor class 1 laser (operating
mode) and a semiconductor class 2 laser
(setup mode). With these classes no
protection is needed.
Spot diameter ILR1100/1150
3 x 10mm
4 x 12mm
10 x 20mm
4m
6m
10m
Compact and fast distance sensors (with reflector)
ILR 1021/1101/1151
Advantages
- Measuring ranges up to 250 m with reflector
- Short response time
- Excellent price-performance ratio
- Fast sensor set configuration via touch keys
Distance sensors of the series optoNCDT
1021/1101/1151 are designed for non-contact
measurements against objects up to 250 m.
These distance sensors need a special reflector on the measurement object with the sensor
being matched to its reflective properties. The
use of this reflector facilitates measurement distances of up to 250 m with excellent accuracy.
94.5
9.5
81.5
43
8
QA
S1
PWR SLOW
0% analog
inv.
QB
5.
21
42
42
optoNCDT
S1
inv.
S2
S2
S
ESC
T
ILR1021: Limit switch programming via touch keys
ILR1101/ILR1151: Limit switch programming via software
5.75
Precise sensor alignment
The aiming laser can be turned on for accurate
alignment of the sensor with the measurement
object. With large measurement distances this
laser is adjusted using the optical alignment
aid available as an accessory. For mounting
the sensor a mounting bracket and a fine adjuster are available as accessories, which simplify the precise alignment of the sensor to the
measurement object
20
8
9
Model
Measuring range
ILR1101-50
ILR1151-250
0.2 ... 30m
0.5 … 50m
0.5 … 250m
reflector required for operation
Linearity
±60mm
Resolution
±3mm 1)
±5mm 1)
1 ... 5mm
Repeatability
0.1 or 0.125mm
±4mm
±5 / 10mm 2)
Response time
Laser class
ILR1021-30
65 / 30ms
measuring laser
±2mm
12ms
2)
IR 905 nm, laser class 1
IR 900 nm, laser class 1
sighting laser
red 650 nm, laser class 2
Operation temperature
-10° … +50° C (-20° … +50° C in continous operation)
Storage temperature
-30° … +75°C
Limit outputs
QA / QB (max. 100 mA)
Switching points
free adjustable (teach in)
Switching hysteresis
adjustable in 1-mm-steps
30mm
min. 20mm (adjustable)
min. 10mm (adjustable)
Plausibility output
-
Service output
-
QS (max. 50mA)
Serial interface
-
RS422 (2.9ms at 57.6kBaud)
SSI - compatible (GRAY / BINÄR adjustable) (SSI Zyklus 80 μs)
Bus interface
-
Profibus or DeviceNet via respective gateway (accessory)
Analog output
Temperature stability
QP (max. 50mA)
4 ... 20 mA
-
-
<1.2mm / °C
<0.5mm / °C
<±5mm absolut
Supply
18 - 30 VDC
Max. consumption
<3W at 24V
Connection
5-pin connector M12
12-pin connector M16
Protection class
IP 67
Material (housing)
ABS shock resistant
Vibration
EN 60947-5-2
10 - 55 Hz, amplitude 1.5mm, period 5 min. at resonant frequency or 55 Hz, stress time 30 min. per axis
Shock
EN 60947-5-2
acceleration 30 g, pulse duration 11 ms, half sinusoid, 3 shocks/axis
Weight
appr. 200 g
appr. 230 g
Accessoires
page 14 - 15
All data regarding accuracy and distance are based on the specified surface
at constant ambient conditions and with a minimum operating time of 15 minutes.
1)
min. distance 2m
2)
slow/fast
Operating Mode
Laser Class 1 (Infrared)
Setup Mode
Laser Class 2 (Visible - Red)
Do not stare into beam
Spot diameter ILR1021
15 x 20mm
30 x 40mm
45 x 80mm
10m
20m
30m
p
max
EN 60825-1. 10/2003
optoNCDT ILR 1021/1101/1151 use a
semiconductor class 1 laser (operating
mode) and a semiconductor class 2
laser (setup mode). With these classes
no protection is needed.
Spot diameter ILR1101/1151
20 x 20mm
100 x 100mm
200 x 200mm
500 x 500mm
10m
50m
100m
250m
State of the art sensor with high precision
ILR 1181-30 / 1182-30 / 1183-30
Advantages
- Measuring range up to 80m on diffuse reflecting
surfaces, up to 150m with reflector
- Option with integral heating
- Easy adjustment with Laser sighting
- Precise measurement on various surfaces
- Practical mounting grooves for easy installation
16
194
144
7.3
84.4
41.9
25.5
M6
51
Sensors in the optoNCDT ILR 1181 / 1182 /
1183 series are optoelectronic sensors for noncontact distance and displacement measurement for industrial applications. Both sensors
operate according to the phase comparison
principle, whereby higher precision can be
achieved. They can be aligned and positioned
in use with a visible laser beam with little effort.
The optoNCDT ILR 1182 series operates with a
50Hz measuring rate and is therefore suitable
for fast processes. The mounting grooves on
the housing offer flexible mounting options for
many situations.
17.5
- Accessories for harsh environments
ø50
10
36
slot nuts
56
Configuration and measurement software for ILR1181 und ILR1182
99
11
Model
ILR1181-30
ILR1182-30
Measuring range 1)
ILR1183-30
0.4 ... 17m
black 6%
grey 10%
0.1 ... 30m
white 90%
0.1 ... 80m
reflector
0.1 ... 150m (reflector film ILR-RF118x)
±2mm (+15°C … +30°C), ±5mm (-40°C … +50°C)
Linearity 2)
Resolution
0.1mm
Repeatability
≤0.5mm
100ms ... 6s
Response time 1)
20ms ... 6s
Laser class (IEC 825-1 / EN 60825-1)
Operation temperature
20ms ... 6s
red 650 nm, laser class 2
-10°C … + 50°C (optional -40°C … +50°C, with integrated heating)
Storage temperature
-40°C … +70°C
Limit outputs
QA (max. 500 mA)
QA / QB (max. 500 mA)
Switching points
free adjustable
Switching hysteresis
free adjustable
Trigger input (not compatible with integral heating)
Serial interface
trigger edge and delay selectable, trigger pulse of max 24V
RS232 or RS422 3)
adjustable, max 38.4 kBaud
SSI interface (RS422), 24Bit,
Gray-encoded, 50kHz … 1MHz
-
Profibus (RS485)
9.6kBaud … 12MBaud 3)
Profibus 3)
Operation mode
external triggering, single / continuous measurement, distance tracking
Analog output
4 … 20mA (16 Bit DA)
-
Temperature stability
≤50ppm / °C
Supply
10 … 30 VDC
Max. consumption
<1.5W at 24 V (<24W with heating)
3,2W at 24 V
(<26W with heating)
12-pin M16
1 x 12-pin M16
2 x 5-pin M12 B-encoded
Connection
Protection class
IP 65
Material (housing)
aluminium strangeness profile, powder-coated
500g, 0.5ms, 1 shock/axis (DIN ISO 9022-30-08-1)
Vibration/Shock
10g, 6ms, 1000 shocks/axis (DIN ISO 9022-3-31-01-1)
Weight
980 g
EMV
EN 61000-6-2, EN 55011
Accessoires
page 14 - 15
depending on target reflectance, ambient light influences and atmospheric conditions
2)
with statistical spread of 95%
3)
sensor configuration via profibus interface
1)
Product identification
ILR 118x - 30 (x x)
Serial interface
0= none
1= RS232
2= RS422
0= without heating
2= integral heating
LASER RADIATION
Do not stare into the beam
CLASS 2 LASER PRODUCT
EN60825-1
P≤1 mW; λ= 650nm
optoNCDT ILR 1181/1182/1183 operate with a wavelength
of 650 nm (visible, red). The maximum optical output is ≤
1 mW. The sensors are classified in Laser Class 2. Class 2
lasers are not notifiable and a laser protection officer is not
required either.
Spot diameter ILR1181/1182/1183
ø11mm
ø35mm
ø65mm
10m
50m
100m
High-performance distance sensor
ILR 1191-300
Advantages
- Measuring range 500m in diffuse reflecting
surfaces, up to 3000m with reflector
- Distance and speed measurement
- Integrated heating
- For fast measuring events
- Easy installation
38.5
44.5
23
24.5
135.4
24
30
Sensors in the optoNCDT ILR 1191 series are
optoelectronic sensors for non-contact distance
and speed measurement for industrial use. The
sensor is designed for very large measuring
ranges, with and without reflector. Due to the
very high measuring rate of the sensor, moving
objects can be measured easily. The sensor
operates according to the laser pulse runtime
principle and is therefore particularly well suited
to applications with large distances.
Commissioning of the sensor is straightforward
due to a variety of interfaces and easy mounting
options. The optoNCDT ILR 1191 is fitted with
an integrated heater for outdoor use. A sighting
device is also integrated for alignment.
49
- Accessories for harsh environments
103.2
12
29.5
90.4
57
Configuration and measurement software for ILR1191
13
Model
ILR1191-300
Measuring range 1)
black 6%
1 ... 150 m
grey 10%
0.5 ... 300 m
white 90%
0.5 ... 500 m
reflector
0.5 ... 3000 m
0ms-1 ... 100ms-!
Speed
Linearity 2
±20mm (at measurement output 100Hz) ±60mm (at measurement output 2kHz)
Resolution
1mm
Repeatability
≤20mm
Response time
distance measurement
0.5ms
speed measurement
12ms
Laser class
measuring laser
905 nm, laser class 1
sighting laser
635 nm, laser class 2
Operation temperature
-40°C … +60°C
Storage temperature
-40°C … +70°C
Limit outputs
QA / QB (max. 200 mA)
Switching points
free adjustable
Switching hysteresis
free adjustable
Trigger input
trigger edge and trigger delay programmable, trigger pulse max. 30 V
RS232 and RS422 with 1.2kBaud … 460.8kBaud
SSI interface (RS422), 24Bit, Gray-encoded 50kHz … 1MHz
Serial interface
Profibus
RS485, 9.6 kBaud … 12MBaud
Operation mode
single / continuous measurement, external triggering (adjustable near field elimination), speed measurement
Analog output
4 … 20mA (16 Bit DA)
Temperature stability
≤50ppm / °C
Supply
10 … 30 V DC
Max. consumption
<5W without heating, 11.5W with heating
Connection
1 x 12-pin M16, 2 x 5-pin M12 B-coded
Protection class
IP 67
Material (housing)
aluminium strangeness profile, powder-coated
Weight
800 g (depends on equipment)
500g, 0.5ms, 1 shock / axis (DIN ISO 9022-30-08-1)
Vibration/Shock
10g, 6ms, 1000 shocks / axis (DIN ISO 9022-3-31-01-1)
EMV
EN 61000-6-2, EN 55011
Accessoires
1
2
page 14 - 15
depending on target reflectivity, stray light effects and atmospheric conditions
with statistical spread of 95%
Product identification
ILR 1191 - 300 (0 x)
Serial interface
1= RS232
2= RS422
3= RS232 + SSI
4= RS232 + Profibus
LASER RADIATION
Do not stare into the beam
CLASS 2 LASER PRODUCT
EN60825-1 λ=905 nm Qm x=137µJ t=6ns
F=2kHz λ=635 nm Pm x=800µW CW
optoNCDT ILR 1191 use a semiconductor class
1 laser (operating mode) and a semiconductor
class 2 laser (setup mode). With these classes
no protection is needed.
Spot diameter ILR1191
measuring laser
sighting laser
45mm
ø17mm
155mm
ø82mm
240mm
ø133mm
538mm
ø307mm
5128mm
ø3007mm
10m
75m
125m
300m
3000m
Software and signal processing
Setup and configuration software
Software for easy configuration of the sensor
is included as standard. All settings can be
conveniently performed with this using a Windows interface on a PC. The sensor parameters are transmitted to the sensor via the serial
port and can also be saved if required. The
software also contains a module which can
display and store the measurement results.
The connection to the PC is made using the
respective sensor cable with a USB converter.
Software download free of charge from
www.micro-epsilon.com/download
IF 2008 Interface card
The IF2008 interface card and IF2008E extension card are designed for installation in PCs
and enables the synchronous capture of up to
six digital sensor signals, two analogue sensor
signals and two encoders. The card is used for
the customer’s own data evaluation. The interface card reads the data from all connected
devices simultaneously and transmits these to
an external PC for further processing.
up to 6 digital signals
2 analog signals
2 encoder
IF2008 PCI interface card for
individual signal processing
CSP 2008: universal controller for multiple sensor signals
146
35
Functions
filter: moving average 1…1024 /
recursive 1...32768 / median 3/5/7/9
zero, master
trigger (measuring value, edge, gate,
software)
automatic sensor detection
(digital interface)
scaleable measuring ranges
synchronisation
Limits
OG, UG, OW, UW, OK
Calculation
A,B; A+B; A-B; -A-B; K-A-B; K+A+B;
K+A-B; K+A; K+B; K(A+B); K(A+k*B)
96.8
103.1
Inputs/Outputs sensors
2 sensor connectors (16 pin)
Digital
1x Ethernet (PC 100 MBit)
1x Ethercat
1x RS422 (SPS max. 1.5 Mbaud) 2 terminal strips (13 pins)
Analog
voltage 0…5 V,
scaleable via software
0…10 V, -5…5 V, -10…10 V),
electrically isolated, 100 kHz, 16 Bit
45.2
14
3.3
57.9
69.1
15
Accessories
Supply and output cable ILR10xx
PC1000-2
length 2 m
PC1000/90-2
length 2 m, 90°-connector
PC1000-5
length 5 m
PC1000/90-5
length 5 m, 90°-connector
PC1000/90-10
length 10 m, 90°-connector
PBLR1100 ILR-M-PB/USB
Accessories ILR 10xx / 110x / 115x
ILR-RF250
reflector film 250x250mm
ILR-R250
reflector film 250x250mm
ILR-R460
reflector film 460x460mm
ILR-R540
reflector film 540x540mm
ILR-R660
reflector film 660x660mm
ILR-R700
reflector film 700x700mm
ILR-MA90
mounting bracket
ILR-FA1
fine adjustment for mounting bracket
ILR-AA1
aligning aid
ILR-APB
connector adapter, Gateway/ProfiBus
ILR-ADN
connector adapter, Gateway/DeviceNet
Supply and output cable ILR11xx
PC1100-3
length 3 m
PC1100/90-3
length 3 m, 90°-connector
PC1100-5
length 5 m
PC1100/90-5
length 5 m, 90°-connector
PC1100/10
length 10 m
PC1100/90-10
length 10 m, 90°-connector
PC1100/20
length 20 m
PC1100/90-20
length 20 m, 90°-connector
PC1100/30
length 30 m
PC1100/90-30
length 30 m, 90°-connector
FC1100
connector
FC1100/90
connector, 90°
PC115x-3/CSP interface cable ILR110x / 115x mit CSP
PC118x-3/CSP interface cable ILR118x / 119x mit CSP
PC115x-3/IF2008 interface cable ILR110x / 115x mit IF2008
PC118x-3/IF2008 interface cable ILR118x / 119x mit IF2008
Accessories ILR 118x / 1191
ILR-MP1191 mounting plate for ILR1191
ILR-AA1191 aligning aid for ILR1191
ILR-RPT1191 protection tube, 100mm for ILR1191
ILR-RF118x reflector film 250x250mm for ILR1181X
ILR-MT118x mounting clamp for ILR118x
ILR-MP118x
mounting plate for ILR118x
ILR-MTN118x
slot nuts for ILR118x
ILR-FBV118x
air purge collar for ILR118x
ILR-PG118x protection glass for ILR118x
ILR-FV118x
filter for ILR118x
Configuration cable ILR118x and ILR1191:
PC1100/90-3/RSxxx length 3 m, D-Sub for RS232 and RS422, integrated power supply
Profibus
PBC1100-I/O-5 PBC1100-I-5 PBC1100-I-10 PBC1100-O-5 PBC1100-O-10 PBFC1100 PBMC1100 Display and signal processing units
DD241PC
digital process display, 1 analog input
DD245PC
digital process display, 2 analog inputs
DD214NA
display for SSI-sensors
CSP2008
universal controller for multiple signals
IF2008
interface card RS485 for PCI interface
Profibus input and output cable, 5m
Profibus input cable, 5m
Profibus input cable, 10m
Profibus output cable, 5m
Profibus output cable, 10m
Profibus plug
Profibus connector
1.75
30
,3
5
ø5
31.8
M45x2
ø25
8,6
ø45
ø4
ø40
2x
Profibus load resistance
Profibus/USB module and service software for ILR1183 / 1191
16.75
ILR-FBV118x air purge collar for ILR118x
ILR-PG118x protection glass for ILR118x
+3°
ILR-AA1:
Optical aligning aid
for beam positioning
ILR-MA90 mounting bracket
+
+ -
-
+3°
ILR-FA1 fine adjustment for mounting bracket
+
-
16
High performance sensors made by Micro-Epsilon
Modifications reservred / Y9761278-A011010MLO
Sensors and systems for displacement,
position and dimension
Eddy current sensors
Optical and laser sensors
Capacitive sensors
Inductive sensors
Draw-wire sensors
Optical micrometers
2D/3D profile sensors
Image processing
Sensors and measurement devices
for non-contact temperature sensors
Online instruments
Handheld devices
Thermal imagar
Measuring systems for quality control
for plastic and film
for tire and rubber
for web material
for automotive components
for glass
Svensk generalagent och distributör:
Sensotest AB
Girovägen 13 - 17562 Järfälla
Tel: 08-564 733 80 - Fax: 08-564 733 89
www.sensotest.se - info@sensotest.se
MICRO-EPSILON MESSTECHNIK GmbH & Co. KG
Königbacher Str. 15 · 94496 Ortenburg / Deutschland
Tel. +49 (0) 8542 / 168-0 · Fax +49 (0) 8542 / 168-90
info@micro-epsilon.de · www.micro-epsilon.de
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising