Below you will find brief information for Scooter Controller RHINO II Controller. This document details the fault codes for the Dynamics RHINO II Controller used on the Sport Rider scooters (SR001 and SR003). The controller will flash specific codes to indicate a fault, such as low battery, brake issues, or motor errors. The flashing pattern can be used to identify the problem and take corrective action. Refer to the provided flash sequence breakdown to interpret the fault codes.
Advertisement
Advertisement
Advertisement
Fault code display via flashing LED
Indicates specific faults like low battery, brake issues, or motor errors
Provides troubleshooting steps for each fault
Detailed flash sequence breakdown for easy interpretation
Contact information for Drive Medical technical support
The blue flashing LED indicates a fault has occurred. The LED flashes in sequences to identify the specific error.
A 4-flash code signifies a 'Current limit time-out'. This means the scooter has drawn too much current for too long. Turn the scooter off and leave it for a minute to reset. If the problem persists, check the loom and motor for shorts.
A 'Motor Volts Error' suggests a problem with the motor or its wiring. Check if the paddle is calibrated and look for open or short circuits.
What does a 4 flash error code (fault 0504) mean?
A 4 flash error code indicates a 'Current limit time-out'. The scooter has drawn too much current for too long. Turn the scooter off and leave it for a minute. If the problem persists, check the loom and motor for shorts.