URA CAD Files Guidelines

Guidelines for submission of CAD files to URA
Table of Contents
General
File Naming
•
File Naming Standards for EDA Submissions
Proposal Plan
•
•
•
Format Of Endorsement For Drainage Interpretation And Road Line
Endorsement For Owner Consent
List of layers to be included in the Proposal Plan
Sketch (Floor, Section & Elevation) Plan
•
List of layers to be included in the Sketch (Floor, Section & Elevation) Plan
Calculation Plan
•
•
Sample of a summary of GFA breakdown by floors
List of layers to be included in the Floor Plans For GFA calculation
Proposal/Diagrammatic Plan for Subdivision of Lands/Strata Subdivision of Buildings
•
•
Declaration And Endorsement by Surveyor
List of layers to be included in the Proposal/Floor for Subdivision of lands/Strata Subdivision of Buildings
Landscape Plan
•
Submission requirements
Proposal Plans for Works to Conservation Building
•
•
Format of Architect’s endorsement
Format of Engineer’s endorsement
General
1. Each CAD file contains only one title block.
2. "Limit" of the drawing in each CAD file matches the boundary of the title block (i.e. no information is
included outside the title block).
3. "Last saved view" of the CAD files covers only the title block and information within it.
4. "Maximum Extents" view should be shown in the "Last saved view".
5. No external reference files should be referenced by the CAD files submitted (i.e. The external reference
files, if any, should be binded before submission).
6. No raster images should be attached to the CAD file submitted.
7. "Draft Work"/Construction lines should not be included in the CAD files submitted.
8. Hatch pattern in CAD files should be kept to minimum.
9. No proprietary fonts should be used.
10. All layers except layers on area calculation should be set to "on" in the "last saved view".
11. Same CAD files (with changes incorporated to comply with the requirements) should be used in
resubmission (i.e. no shifting of co-ordinates in the re submitted files).
12. Format of CAD layer as indicated in Singapore CAD layering standards (CP83 part 1) should be used.
13. No hidden CAD layers should be included in the CAD files.
14. For “Additions and Alterations” or Amendment proposal, the following colours should be used:
Usage
Proposed /Additional Elements
Existing /Approved Elements
Deleted Elements
Colour
Magenta
Cyan
Yellow
DWG Colour Code
6
4
2
DGN Colour Code
5
7
4
15. Except for development applications that require the re-computation of the gross floor area for the entire
development, all other development applications and lodgments for addition and alteration works can be
submitted with details on the additions and alterations of the affected areas only. For the other areas of the
existing development, only the building outline is required (Please see example below).
Example of acceptable illustration for Addition and Alteration Works
File Naming
16. File Naming convention as indicated below should be used:
Project Identification
Zone (or Block)
Version (Revision/Submission no.)
User-defined
_
Level / View plane
Type of Work
Author
Project Identification
User-defined field. E.g. MLP1 for Merlion Park Project.
Author
Individual /company /organisation responsible for creating the file. E.g. A- for Architect.
Type of Work
SP
Site Plan (If the submission contains only one CAD file with all details such as site
layout and floor layout , then Type of Work should be indicated as SP)
FP
Floor Plan ( If the CAD file contains floor layout and ‘section and or elevation drawing’
then Type of Work should be indicated as FP )
FE
Floor plan – elevation view ( If the CAD file contains section and elevation drawing, then
Type of Work should be indicated as FE )
FX
Floor plan - cross section view
SX
Site cross section view
SE
Site elevation view
SV
Survey Plan
TP
Topo Plan
PP
Land Profile Plan
RD
Road Interpretation plan
DN
Drainage Interpretation plan
RW
Retaining walls
BC
Bin Centres
SN
Substations
LS
Landscaping
LT
Lighting Plan
OA
Other ancillary structure( eg bin centre, Guard house on same CAD File )
Level/View plane
02
2nd storey
12
12 storey, or typical floor from 12 storey and above
A-
Attic
B2
Basement 2
E2
Elevation 2
M3
Mezzanine 3
R-
Roof
--
Whole project / Site plan
BB
Section BB
NE
Northeast elevation plan
-A
1st drawing in the submission with multi-levels, multi-View Plane in the
same CAD file
-B
2nd drawing in the submission with multi-levels, multi-View Plane in
the same CAD file
Zone or Block
01 for block 1, …….- - for all blocks
A1 for Zone A1
Version(revision /Submission)
ABC-
st
1 submission
nd
2 submission
rd
3 submission
Proposal Plan
17. For new erection applications, the following declaration of DIP and RLP should be properly done
Drainage Interpretation
I, (type name of Architect/Professional Engineer) , confirm that the drainage details as shown in the layout
plan are in accordance with the current information provided by the Chief Engineer, Central Building Plan
Unit, NEA.
Road Line
I (type name of Architect/Professional Engineer) , confirm that the road reserve lines, the category of the
proposed and existing roads and other related road information as shown in the layout plan is in
accordance with the current information provided by the LTA.
18. The following declaration of ownership should be properly done
I/We, (type in name of person e-signing the plan ), hereby declare that (a) I/we am/are not the owner(s) of the land within the meaning of the term "owner" as defined in Section 2
of the Planning Act (Cap 232, 1998Ed) ; and
(b) I/we have shown this plan to the owner(s) of the land, and have obtained the consent of the said
owner(s) to submit this plan to the Competent Authority under the Planning Act (Cap 232, 1998Ed).
19. Cadastral based site plan with a surrounding radius range of 10m to 50m is incorporated in the proposal
plans. (Note: If this is not possible, applicant is to provide a cadastral key plan as an insert onto the
proposal plans or submit the cadastral key plan separately as a scanned image).
20. Relevant information required for planning consideration should be indicated according to layers as listed below
S/No
1
2
3
4
5
6
Element name
Main
Sub
ENDOURAANOTTBLK
LNSPBUFF
LNSPVERG
RETW---ROAD----
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
ROADWIDL
SDRNRESV
SITE---SITEBNRY
CADI---SITEKPLN
SITENRTH
SITESTBK
SITEWALL
SITEBLDG
SITEBASE
TOPOPLVL
SPACBLDG
SPACCOSS
SPAC----
Description of elements
Plan endorsement
Title block, Scales, Drawing boundary
Legend text
Company Logo
Green buffer line with dimension , physical buffer line
with dimension
Planting verge with dimension
Retaining walls with dimension
Roadways, Road category text
Road Name text
Road centre lines
Kerbs
Road widening lines, Plot Numbers for Road reserve
Drainage reserve lines, Plot Numbers for Drainage
reserve
Site, external works, earth work
Site boundary
Cadastral information, Lot Number, Lot Boundary
Key plan
North point
Building setback dimensions
Boundary wall, site fencing
Building Outline
Basement Outline
Platform level
Building plot boundaries, building plot numbers
Plot boundaries and plot numbers for communal
use/open space
Plot boundaries and plot numbers for right of
way/easement, parkway reserve
DWG
Colour
Code
DGN
Colour
Code
7
7 or any
other
colour
0
0 or any
other
colour
94
130
94
1
130
3
14
131
14
131
5
1
7
1
7
7
7
1
174
4
214
7
14
0
3
0
0
0
3
129
7
133
0
131
94
130
7
0
21. Site boundary should be indicated in the CAD layer with element name SITEBNRY
22. All building setbacks should be indicated in the CAD layer with element name SITESTBK
23. All building plots, and area for communal use/open space should be shown as separate plots in the
CAD layer with element name SPACBLDG and SPACCOSS respectively.
24. Parcels of land for vesting such as road widening and drainage reserve etc should be shown as
separate plots in the CAD layer with element name ROADWIDL and SDRNRESV respectively.
25. Existing ground levels for the subject site and adjoining sites immediately across the common
boundaries & proposed platform levels should be indicated in the CAD layer with element name
TOPOPLVL.
26. Retaining walls if any, should be indicated in the CAD layer with element name RETW-- --.
27. Boundary walls if any, should be indicated in the CAD layer with element name SITEWALL.
28. Buffer zone provisions should be indicated in the CAD layer with element name LNSPBUFF.
29. 2m wide planting strip along the boundary should be indicated in the CAD layer with element name
LNSPVERG.
30. Access arrangement should be indicated in the CAD layer with element name ROAD-- --.
31. Road categories should be indicated in the CAD layer with element name ROAD- -- -.
Sketch (Floor, Section & Elevation) Plan
32. The following declaration of ownership should be properly done
I/We, (type in name of person e-signing the plan ), hereby declare that (a) I/we am/are not the owner(s) of the land within the meaning of the term "owner" as defined in Section 2
of the Planning Act (Cap 232, 1998Ed) ; and
(b) I/we have shown this plan to the owner(s) of the land, and have obtained the consent of the said
owner(s) to submit this plan to the Competent Authority under the Planning Act (Cap 232, 1998Ed).
33. Relevant information required for planning consideration should be indicated according to layers as listed below
S/No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Element name
Main
Sub
ENDOURAANOTTBLK
FLORLEVL
RETW---SITENRTH
SITEWALL
TOPOPLVL
BEAM---COLN---CPRK---DOOR---FLOR---GRID---LIFT---STRC---WALL---WIND----
Description of elements
Plan endorsement
Title block, Scales, Drawing boundary
Legend text
Company Logo
Floor level
Retaining walls with dimension
North point
Boundary wall, site fencing
Platform level
Beams
Column
Car Parking lots
Door
Floor
Grids
Lifts
Staircases
Walls
Windows
DWG
Colour
Code
DGN
Colour
Code
7
0
7 or any
other colour
0 or any
other colour
7
1
7
174
7
7
7
214
7
7
4
7
7
1
7
0
3
0
129
0
7
7
7
7
7
7
7
7
7
7
34. Floor to floor heights should be indicated on section and elevation plans and in the CAD layer with
element name FLORLEVL.
35. Basement protrusions if any , should be indicated on section and elevation plans and in the CAD layer
with element name FLORLEVL.
36. Lines of existing ground level should be indicated on section and elevation plans and in the CAD layer
with element name TOPOPLVL.
37. Maximum building height in m AMSL should be indicated on section and elevation plans and in the CAD
layer with element name FLORLEVL.
38. Retaining walls if any, should be shown on the section/elevation plans and in the CAD layer with
element name RETW--- -.
39. Boundary walls if any, should be shown on the section/elevation plans and in the CAD layer with
element name SITEWALL.
Calculation Plan
40. All polygons demarcate area for calculation should be drawn using lightweight polylines for dwg files
and complex shape (or shapes) for dgn files. All area included in GFA calculation should be demarcated
and all polygons should be “closed”. All parcellations of area should be presented by floors and not by
individual units.
41. Labels represent each area demarcated and tabulation of area calculations should be indicated on top
right hand corner of the plan.
42. Area included in layer ”AREAGFAD” (i.e red polygons) should be within the area in the layer “AREAGFAA”
(i.e green polygons).
43. Service Ducts without floor slabs and voids should be indicated clearly with crosses.
44. Details calculations on quantum use and secondary use (if applicable) should be incorporated.
45. Detailed calculations on area of balconies to be computed over and above the Master Plan allowable gross
plot ratio (if applicable) should be incorporated .
46. Detailed calculations on area of outdoor refreshment area to be computed over and above the Master Plan
allowable gross plot ratio (if applicable) should be incorporated.
47. A summary of GFA breakdown by floors ( see example below )should be incorporated in the site plan.
48. Layers with the following element name should be included in the floor plans for GFA calculations:
S/No
Element name
1
2
Main
Sub
AREAGFAA
AREAGFAD
3
AREAGFAB
4
AREAGFAR
5
AREAGFAR
Description of elements
Area to be included in GFA calculation
Area included in layer AREAGFAA but to
be excluded from GFA calculation
Area of balconies to be computed over
and above the Master Plan (MP)
allowable gross plot ratio (GPR) - Please
see URA circular URA/PB/01/19-DCD &
URA/PB/2007/01-DCD for details
Area of outdoor refreshment area to be
computed over and above the Master
Plan allowable gross plot ratio
Area to be to be excluded from outdoor
refreshment area as in item 4 above
DWG Colour
Code
DGN Colour
Code
3
1
2
3
94
130
94
130
6
5
S/No
Element name
6
Main
Sub
AREAGFAQ
7
AREAGFAQ
8
AREAGFAQ
9
AREAGFAQ
10
AREAGFAQ
11
AREAGFAS
12
AREAGFAS
13
AREAGFAS
Description of elements
Area to be included in the 60% (minimum)
hotel room & hotel related use quantum
Area to be included in the 60% (minimum)
industrial use quantum
Area to be computed under the 50%
(minimum) prayer quantum
Area to be included in the Business Park
White (15%)
Area to be to be excluded from Industrial
use quantum, prayer quantum or
Business Park white quantum calculation
Area to be computed as secondary use in
an industrial development
Area to be computed as commercial use
in a mixed use development
Area to be to be excluded from secondary
use calculation in an industrial
development or commercial use
calculation in a mixed use development
DWG Colour
Code
DGN Colour
Code
4
7
4
7
4
7
4
7
6
5
4
7
4
7
6
5
49. Layers with the following element name should be included in the site plans for calculation of Communal
Open Space and Building Coverage:
S/No
Element name
1
2
Main
Sub
AREABDBA
AREABDBD
3
4
AREACOSA
AREACOSD
Description of elements
Building block area
Area to be deducted from building
coverage
Communal open space area
Area to be deducted from communal open
space
DWG Colour
Code
DGN Colour
Code
6
5
4
2
4
2
7
4
Proposal/Diagrammatic Plan for Subdivision of Lands/Strata Subdivision of Buildings
50. The following declaration of ownership should be properly done on the proposal / diagrammatic plan
I/We, (type in name of person e-signing the plan ), hereby declare that (a) I/we am/are not the owner(s) of the land within the meaning of the term "owner" as defined in Section 2
of the Planning Act (Cap 232, 1998Ed) ; and
(b) I/we have shown this plan to the owner(s) of the land, and have obtained the consent of the said
owner(s) to submit this plan to the Competent Authority under the Planning Act (Cap 232, 1998Ed).
51. The following declaration should be properly done by the surveyor on the proposal plan
I, (name of surveyor) declare that the building layout tallies with the development approved plans
registered as plan ( ) in DC/AP_ES______________ dated _______. I also declare that the setbacks
shown on this plan do not deviate more than 3% of the setback as approved under the said development
plans.
52. The following endorsement should be properly done by the surveyor on the diagrammatic plan
1.
I, (name of surveyor) certify that the strata unit layout is in accordance with the Building Plan
approved on __________ under BP number ____________.
2.
I, , (name of surveyor) declare that the strata unit excludes all common properties indicated and
referred to in the planning permission granted by the Competent Authority under the Planning Act
(Cap 232).
53. Layers with the following element name should be included in the proposal / diagrammatic plan where
applicable
S/No
Element name
Main
1
2
3
4
5
Description of elements
DWG Colour
Code
DGN Colour
Code
Sub
ENDOURA-
Plan endorsement
ANOTTBLK
Title block, Scales, Drawing boundary
Legend text
Company Logo
7 or any other
colour
0 or any other
colour
ROADWIDL
Road widening lines, Plot Numbers for
Road reserve
14
131
SDRNRESV
Drainage reserve lines, Plot Numbers for
Drainage reserve
5
1
SITEBNRY
Site boundary
1
3
7
6
CADI----
Cadastral information, Lot Number, Lot
Boundary
-Existing lot boundaries and numbers are
to be in layer with status "E"
4
7
6
5
- Proposed new lot boundaries and
numbers are to be in layer with status "N"
7
8
9
10
11
SITENRTH
North point
7
0
SITESTBK
Building setback dimensions
1
3
SPACSTRA
Strata unit boundary on floor plans for
strata subdivision
1
3
SPACBLDG
Building plot boundaries, building plot
numbers
14
131
SPAC----
Plot boundaries and plot numbers for right
of way/easement, parkway reserve
7
0
54. Existing lot boundaries should be shown by dotted lines together with their lot number and indicated in
the CAD layer with element name CADI----.
55. Boundary of land to be subdivided should be indicated in the CAD layer with element name SITEBNRY
56. All proposed new lot boundaries with dimensions should be indicated in the CAD layer with element
name CADI---57. All building plots and parcels of land for vesting such as splay corner, road widening, drainage reserve,
etc should be shown as separate plots and indicate in the appropriate CAD layers.
58. Strata unit boundary should be indicated on floor plans for strata subdivision in the the CAD layer with
element name SPACSTRA.
Landscape Plan
Landscape plan is to be provided with the application, for the submission on the objective-based guidelines on
the minor ancillary structures within the green buffer and 2m planting strip along common boundaries. The
requirements as follows:
59. Location and species of proposed small to medium size shade trees are to be shown.
60. A legend for the proposed trees is to be provided.
61. Computation of number of trees are to be clearly indicated.
62. Types of ancillary structures with justifications (in separate document, if necessary), the height and
width are to be clearly shown.
63. All proposed green buffer/planting verges are indicated as tree-planting strip only.
64. Widths of all proposed planting provision provided are indicated.
65. All slopes are shown on plan with standard symbols. The gradients of all proposed slopes are shown.
Proposal Plans for Works to Conservation Buildings
66. The following endorsements by Architect and Professional Engineer are to be included in the proposal
plans for works to conservation buildings.
Architect’s endorsement - The following endorsement should be properly done
URBAN REDEVELOPMENT AUTHORITY
CONSERVATION REQUIREMENTS
FLUE
Flues and vents shall be located either on the rear slope of the main roof or the rear secondary roofs or
abutting the wall of the rear façade / rear service block within the rear court. The roof of the flue can be
pitched or flat and shall not be higher than the ridge of the main roof.
AIR-CONDITIONING
The installation of air-conditioning units shall comply with the conservation guidelines.
SIGNAGES
Detailed drawings of signage design indicating the size, location, lettering typeface and method of support
and illumination shall comply with the conservation guidelines and shall be submitted to the Building and
Construction Authority (BCA) for licensing.
Engineer’s endorsement - The following endorsement should be properly done. Please note that the
Professional Engineer’s (PE) endorsement shall be accompanied with the official stamp of the PE.
ENGINEER’S ENDORSEMENT
As a qualified person, I agree with and endorse the alterations to the structure as shown on this plan and that
they are generally in accordance with conservation principles and good engineering practice. Where further
strengthening or additional structural members are required to support addition and alteration work, formal
approval will be sought from the Competent Authority under Planning Act and Building Authority under
Building Control Act prior to commencement of work on site.
">