Instructions / Assembly

Item #: D51AL30

Assembly Instructions

For our most current instructions, to request missing, lost or broken parts, or for any other Customer

Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.

Revised 02/2011

Parts List

Component List

Leg

Leg

Leg

Leg

Corner frame

Glass

Corner glass

*

Hardware List

Foot

*Note: This piece comes preassembled for shipping purposes and must be disassembled to complete the desk assembly.

Long bolt

Short bolt

I

A Phillips head screwdriver is required for assembly

(not included)

Screw feet (A) into legs (1,2,3,4) and CPU stand (8).

Tray arm

Tray bracket

Disassemble keyboard tray slider (B) by sliding the tray arm and tray bracket apart. Depress the small lever of the tray bracket and carefully pull the two pieces apart. Repeat this process for both keyboard tray sliders (B).

Attach the tray arms of keyboard tray sliders (B) to legs (1,2) using screws (C). Ensure that the open end of

each tray arm is near the front of each leg. Tighten screws (C) with a screwdriver.

I

Attach crossbar (6) to legs (1,2) using long bolts (D) and plastic washers (E). Tighten long bolts (D) with wrench (I).

I

Attach crossbar (6) to legs (3,4) using long bolts (D) and plastic washers (E). Tighten long bolts (D) with wrench (I).

I

Attach corner frame (5) to legs (2,3) using short bolts (F). Tighten short bolts (F) with wrench (I).

I

Attach glass (9) to the desk frame using medium bolts (G). Tighten medium bolts (G) with wrench (I).

I

Attach middle glass (10) to the desk frame using medium bolts (G). Tighten medium bolts (G) with wrench (I).

Attach the tray brackets of keyboard tray sliders (B) to keyboard tray frame (7) using screws (C). Ensure that

the open end of each tray bracket is near the back of keyboard tray frame (7). Tighten screws (C) with a screwdriver. Insert rubber suction cups (H) into keyboard tray frame (7). Carefully lay keyboard tray glass

(11) in place and gently press to secure.

Tray arm

Tray bracket

1

2

Carefully slide keyboard tray frame (7) into place. The tray brackets attached to keyboard tray frame (7) will

slide into the tray arms attached to legs (1,2).