advertisement
MD111025-01
H10-
AU
Mini Hi Fi System
Package Contents
Please carefully check the package first and then open the package. Package contents include:
H10 amplifier: 1 piece
REPEAT
MENU
Mini Hi Fi System
SHUFFLE SELECT
H10-
AU
Remote Control: 1 piece Instruction Manual:
1 piece
Power Cord: 1 piece
FM Antenna: 1 piece USB Cable: 1 piece Speaker Cable: 1 pair
3.5 Converting Audio
Signal Cable: 1 piece
H10 Speaker: 1 pair
Amplifier Dock: 1 piece Main Fuse: 2 pieces Four-head RCA Audio
Signal Cable: 1 piece
Above accessories are for your reference and Spark Electronic Equipment Co., LTD reserve the rights to change without further notice.
Note:All other parts except above are not included.
Important Notice
◆
We are not responsible for servicing of the product if the serial numbers are different on the packing box, warranty card and rear panel or if the serial number is modified or if there is no warranty card.
◆
Without written permission of Zhuhai Spark Electronic Equipment Co., Ltd., any enterprise or individual is forbidden to copy, reproduce or retranslate any part of this manual in any form.
◆
Specification and information in the users' manual are only for reference and subject to change without further notice.
Safety precautions
1. Please make sure local voltage level is matched with the input level of the amplifier, which indicates on the rear panel.
2. Unplug the power cord if you are not going to use the product for an extended period of time.
3. Please keep the unit's ventilation open and install the amplifier at a well-ventilated place to avoid troubles and fire hazard.
4. Handle with care in transit to avoid damage.
5. Keep the machine from moisture. Use the machine after making it dry.
6. To reduce the risk of electric shock, do not remove the cover.
7. Do not place any objects filled with liquids such as vases or some others on the machine or around.
8. Do not attempt to service this product yourself. Opening the cover may expose you to dangerous voltage or other hazards.
9. Clean only with dry cloth and unplug the power cord in advance.
10. Avoid metal articles dropping into the machine.
11. Lay flat and place the product steadily.
12. Keep the machine from its surrounding at least 10cm.
13. Do not place any inflammable on top of the machine.
14. Do not place the product near heat sources such as radiators, heat registers or other products that produce heat.
15. Please use the original power cord together with the machine and make sure power socket has been grounded.
16. If any troubles with the product please contact our company or our local agent.
CAUTION
RISK OF ELECTRONIC SHOCK
DO NOT OPEN
◆ To reduce the risk of electric shock, do not remove the cover.
◆ No user serviceable parts inside. Refer servicing to qualified service personnel.
◆ To reduce the risk of fire or electronic shock, do not expose the unit to rain or moisture.
Safety precautions
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert users to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of a sufficient magnitude risk shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance.
Note
:
Please make sure local voltage level is matched with the input level of the amplifier, which indicates on the rear panel. We are not responsible for the risks or hazards caused by improper voltage.
Front Panel
H10
1 2 3
PictureI : Front View Picture of H10
4
①
. Type A USB Socke
t
Used to connect with external USB storage device (U-disk, MP3 media player, Card reader, etc).H10 can play MP3/WMA/AAC format of audio files stored in USB storage device.
②
. LCD Display
S
howing operation state of H10.
③
. Headphone Jack
D
esigned with good sound headphone amplifying circuitry and help you enjoy the highqualified music alone.
④.
IR Remote Sensor
Use
d to receive the code of remote control.
3
4
Rear Panel
3
PC-DAC
L
AUX IN
FM ANT
R
R+
R-
SPEAKER
L+
L-
1 2
TI.6AL 250V
ON
OFF
4 5 6 7 8
①.
Type B USB Socket (PC-DAC)
Con
nect with computers.
②
. FM Antenna Socket
C
onnect with the FM Antenna.
③.
AUX IN
Con
nect with sound source like DVD, MP3 player and Television.
④
.
Right Channel Output (R+/R-)
⑤
. Left Channel output (L+/L-)
Con
nect the speaker with output terminals above. Please notice the right direction indication of the cable and do not mix up the positive and the negative ends.
⑥
.
Power Socket
AC
power Input
⑦
.
FUSE
Ple
ase replace the fuse with specification of T1.6A/250V.
⑧
. Power Switch
T
urn on and turn off.
5
Top Panel
SELECTOR VOLVOL+
1 2 3 4 5 6
Picture III : Over View Picture of H10
①
. SELECTOR
S
elect among USB, PC-DAC, FM and AUX
②
. VOL-
V
olume down
③
. VOL+
④
.
V
olume up
USB
Operation State:
Press once and it will repeat the current track.Press twice in a short time it will turn to previous track.
PC-DAC
Operation State:
Turn to previous track
FM
State:
Turn to previous radio station pre-stored
⑤
.
USB
Operation State:
Play or Pause
PC-DAC
Operation State:
Play or Pause
FM
State:
Press for 3 seconds, and it will start pre-storing the radio station automatically
⑥
.
USB
Operation State:
Turn to next track
PC-DAC
Operation State:
Turn to next track
FM
State:
Turn to next radio station pre-stored
6
Remote Control
1
3
USB
FM
PC-DAC
AUX
10
13
14
16
17
5
MENU
/CH-
REPEAT
VOL-
BASS-
TRE-
/TU+
/ATS
SELECT
/CH+
/TU-
MEMORY
SHUFFLE
FOLD
MUTE
VOL+
BASS+
TRE+
QT153
11
12
15
18
6
7
9
2
4
8
Picture IV: Picture of Remote Control
①.
USB
Tu
rn to U-Disk State
②.
PC-DAC
Tu
rn to PC-DAC State
③.
FM/AM
Tu
rn to FM State
④.
AUX1/2
⑤.
Tu
rn to AUX1 State
/CH-
USB Operation State:
Press once and it will repeat the current track. Press twice in a short time it will turn to previous track
PC-DAC Operation State:
Turn to previous track
FM State:
Turn to previous radio station pre-stored
7
Remote Control
⑥.
/ATS
US
B Operation State:
Play or Pause
PC-DAC Operation State:
Play or Pause
FM State:
Press for 3 seconds, and it will start prestoring radio station automatically
⑦.
/CH+
US
B Operation State:
Turn to next track
PC-DAC Operation State:
Turn to next track
FM State:
Turn to next radio station pre-stored
⑧.
/TU+
USB Operation State
:
Turn to the last ten tracks
FM State:
Turn to higher frequency
⑨.
/TU-
US
B Operation State:
Turn to the last ten tracks
FM State:
Turn to lower frequency
⑩.
VOL
-:Volume down
11
. /
MEMORY
USB
Operation State:
Stop
FM State:
Pre-store
12
.VOL+
V
olume up
13
.BASS-
Bass down
14
.FOLD
USB Operation State:
Select next folder to play
15
.BASS+
Bass up
16
.TRE-
Treble down
17
.MUTE
Mute
18
.TRE+
Treble up
8
System Connection
1. Speaker Connection
-
- +
+
Red Terminal
PC-DAC
L
AUX IN
FM ANT
R+
R
R-
SPEAKER
L+
L-
TI.6AL 250V
ON
OFF
-
- +
+
①.Connect one end of the audio signal cables to the positive and negative from your speakers.
Red to Red and Black to Black.
② .Connect the other end of the audio signal cables to the positive and negative from the amplifier. Red to Red and Black to Black.
③.Take the same way for both Left Channel and Right Channel Speakers.
④ .R refers to right channel while L represents left channel. Take above picture for your reference.
Notice
:To make sure a better listening, please keep the two speakers in an appropriate distance, not too close.
L
Schematic Diagram of Speakers
R L
R
Locating the two speakers in reverse directions will w o r s e n t h e a c o u s t i c fidelity seriously!
Note
:
◆ Please do not insert the power cord into the main socket before all other instruments are well connected.
◆ Please take the right guidance for connection because wrong connection may cause noise or low-grade function.
9
System Connection
2. USB Storage Device Connection
the remote control or“SELECTOR”on the top panel. Then the operation state will turn into“U
DISK” state and you can enjoy the music freely in the storage device.
(1).Compatible for U-Disk
①.Plug the U-Disk to USB socket
“ ”
in the front panel.
②.If it is playing music stored in the U-Disk, let it stop playing before unplugging the U-Disk.
H10
(2).Compatible for Device with USB Cable
①.Connect the USB cable to the USB device.
②.Plug the USB cable to USB socket
“ ”
in the front panel.
H10
10
System Connection
(3).Compatible for Storage Card
①.Plug the storage card to a card reader.
②.Plug the card reader to the USB socket
“ ” in the front panel.
H10
System Connection
Note
:
◆ Card Reader and USB cable are not attached with the machine.
◆ The machine will be at waiting state after recognizing the USB storage device. Press the play key,and it will start playing.
3. Computer Connection
① .Plug the B end of USB cable to“PC-DAC”USB socket in the rear panel. Plug the A end of
USB cable to the computer USB socket. Press“SELECTOR”or“PC-DAC”on the remote control, the sound source will switch to“PC-DAC”state.
②.Computer will recognize the USB sound card and use it as audio device.
③.Use USB cable with USB1.1 and USB 2.0 specification.
④.If the computer operation system is Windows 7/Vista/XP/2000 or Mac OS X, it can start the device driver of the USB sound card.
⑤.Cut off the connection of the machine and computer if you don't use the PC-DAC function for an extended period of time.
11
PC-DAC
L
AUX IN
FM ANT
R
R+
R-
SPEAKER
L+
L-
TI.6AL 250V
ON
OFF
4. Other Audio Devices Connection
signal cable. It will become wonderful HI-FI audio system.
PC-DAC
L
AUX IN
FM ANT
R
R+
R-
SPEAKER
L+
L-
TI.6AL 250V
ON
OFF
12
System Connection
PC-DAC
L
AUX IN
FM ANT
R
R+
R-
SPEAKER
L+
L-
TI.6AL 250V
ON
OFF
②.Connect the audio signal cable, then press“SELECTOR”on the panel or“AUX”on the remote control, the sound source will turn to“AUX”state.
System Connection
5. FM Antenna Connection
location.
FM Antenna
PC-DAC
L
AUX IN
FM ANT
R
R+
R-
SPEAKER
L+
L-
TI.6AL 250V
ON
OFF
②.To receive the signals better, you can connect the FM antenna to an outdoor FM antenna. If you really use an FM antenna, please pay attention to lightning protection.
Note
:
◆
Don't connect the left and right channels in the reverse directions.
◆ Turn off the main power before finishing other connections.
13
FM A nte nna
PC-DAC
L
AUX IN
FM ANT
R
R+
R-
SPEAKER
L+
L-
TI.6AL 250V
ON
OFF
Note:
To receive the signals better, please put the FM antenna away from the speaker, power cord and USB cable.
14
System Connection
6. Headphone Connection
H10 is a HI-FI power amplifier, as well as a headphone amplifier. You can enjoy the wonderful music with the headphone.
①.Plug the headphone with 3.5 mm diameter to the headphone output jack in the front panel.
② .The machine will shut down the terminal signals from the left and right channels after the headphone is plugged.
H10
System Connection
8. Installation of Remote Control Battery
①.Place the remote control upside down.
②.Press the sunken position, and then buckle downward.
③.Place the new battery according to the positive electrode and negative electrode directions listed on the battery stand.
④.Push the battery stand to the original position.
⑤.Change the battery when the remote control doesn't work.
Note:
Pay attention to the volume and listening time, in case that it will hurt your auditory system.
7. Power Cord Connection
①.
Plug the power cord to the power socket after finishing other connections.
② . Press the power switch to“On”, and then the machine starts working; Press the power switch to“Off”, and then the machine will stop.
PC-DAC
L
AUX IN
FM ANT
R
R+
R-
SPEAKER
L+
L-
TI.6AL 250V
ON
OFF
15
9. Remote Control Operation
①.Aim the remote control directly at the remote sensor.
②.In order to avoid weakening the controlling effect, please don't lay any obstacle between the remote control and the remote sensor.
Note:
◆ Don't drop the remote control.
◆ Keep the remote control dry.
◆ Use the battery with specification of CR2025/3V.
◆ Do with the used battery (with chemical substance) properly.
16
Basic Operation
1.Play music in USB Storage Device
You can do the following operations as you are instructed.
The machine supports the audio formats of mp3, wma and m4a, etc.
(1).Play
① .Select the USB model by pressing“SELECTOR”on the top panel or“USB”on the remote control. The LCD screen will show:
②.Plug the USB storage device to the
“ ”socket.
③ .Press the“
”on the top panel or“
/ATS
”on the remote control, it will start playing.The display screen will show: “ ”,the current track and the time.
(2).Suspend
①.When it is playing, press“
”on the top panel or“ will suspend. The screen will show: “ ”.
②.Press the“ ”on the top panel or“
/ATS ”on the remote control, the machine
/ATS ”on the remote control again, the machine resumes.
(3).Stop
①.When it is playing, press the“ screen will show:“ ”.
/MEMORY
②.Press the
“ ”
on the top panel or
“
resumes.
”on the remote control, the machine will stop. The
/ATS
”
on the remote control again, the machine
(4).Select Forward/Backward
① .When it is playing, press twice in a short time the“
”on the top panel or“ /CH”on the remote control, it will turn to the previous track . If the current tack is the first one, it will turn to the last track.
②.When it is playing, press the“
”on the top panel or“ /CH+ ”on the remote control, it will turn to the next track. If the current track is the last one, it will turn to the first track.
17
Basic Operation
(5).Select Forward/ Backward by 10 Tracks
①.When it is playing, press“
/TU- ”on the remote control, it will turn forward to the track lining
10 before the current one. If the current track lines within the first 10 tracks, it will stop skipping.
②.When it is playing, press“
/TU+
”on the remote control, it will turn backward to the track lining
10 after the current one. If the current track lines within the first 10 tracks, it will stop skipping.
(6).Select Folders
Select the folders in your U flash disk by pressing“FOLD”on the remote control.
(7).Audio Frequency Document Format
①.
MP3
Sample Rate: 8K, 16K, 32K, 11.025K, 22.05K, 44.1K, 12K, 24K and 48K.
Bit Rate (Data Rate): 8-320 Kbps and variable bit rate.
②.
WMA
Sample Rate: 8K, 16K, 32K, 11.025K, 22.05K, 44.1K, 12K, 24K and 48K.
Bit Rate (Data Rate): 5-320 Kbps and variable bit rate.
③.
AAC
Sample Rate: 8K, 16K, 32K, 11.025K, 22.05K, 44.1K, 12K, 24K and 48K.
Bit Rate (Data Rate): 5-320 Kbps and variable bit rate.
18
Basic Operation
2. Listen to FM Broadcast
You can do the following operations as you are instructed.
(
1
).
Tune Radio Stations Manually
① .Select the “TUNER FM” model by pressing“SELECTOR”on the top panel or“FM”on the remote control. The LCD screen will show:
Basic Operation
(4) .Cancel the Prestored Stations
Press the“ /MEMORY”for about 3 seconds, it will cancel all the prestored stations.
3. Play Computer Music by USB Sound Card
You can do the following operations as you are instructed. Window Media Player or
Foobar2000 Player is recommended.
(1).Play
①.Select the USB sound card model by pressing“SELECTOR”on the top panel or“PC-DAC”on the remote control. The LCD screen will show:
②.Select the radio station and set it at the best receiving state by pressing“
/TU+ ”or“
/TU-
”on the remote control. The step length of frequency is 0.1 MHz. The display screen will show the frequency of the radio station.
(2).Prestore Radio Stations
You can prestore as many as 99 FM radio stations.
1) .Prestore the Radio Stations Automatically
Press the“ ”on the top panel or“
/ATS
”on the remote control for about 3 seconds, then the machine can prestore the radio stations within the frequency of 87.5-108.0 MHz. In the end, it will skip to the first station. The screen shows the station number and frequency.
2) .Prestore the Radio Stations Manually
①.Tune to the station to be stored.
②.Press the“ /MEMORY”, and then the screen will show“MEM”.
③.Select the station number by pressing“
”and“ ”on the top panel or“ on the remote control. The screen will show the station number.
④.Press the“ /MEMORY”again, and then the station is stored.
⑤.Repeat
①-④ steps to store other stations.
/CH”and“ /CH+ ”
(3).Listen to the Prestored Stations
Choose the stored stations by pressing“ ”and“ ”on the top panel or“ /CHon the remote control. The screen will show the station number and frequency.
”and“ /CH+ ”
19
②. Press the“
”on the top panel or“ start.
/ATS
”on the remote control, the computer player will
(2).Suspend
①.When it is playing, press the“ ”on the top panel or“ the player will suspend.
②.Press the“
”on the top panel or“ will resume.
/ATS
/ATS
”on the remote control, and then
”on the remote control again, and then the player
(3).Select Forward/Backward
①.When it is playing, press twice in a short time the“
”on the top panel or“
/CH-
”on the remote control, it will turn to the previous track. If the current track is the first one, it will skip to the last track.
②.When it is playing, press the“
”on the top panel or“
/CH+
”on the remote control, it will turn to the next track. If the current track is the last one, it will skip to the first track.
20
Basic Operation
4. Sound Control
(1).MUTE
①.Press“MUTE”, and then the machine enters into mute state. The screen shows“MUTE”.
②.Press“MUTE”again or adjust the volume value, and then it will return to normal value.
(2) Turn up/down Volume
① .Press“VOL+”on the top panel or“VOL+”on the remote control to turn up the volume. The screen will show the added volume value. Press“VOL-”on the top panel or“VOL-”on the remote control to turn down the volume. The screen will show the decreased volume value.
②.You can adjust the volume between 0-32.
(3).Turn up/down Bass
① .Press“BASS+”on the remote control to turn up the bass. The screen will show the added bass value. Press“BASS-”on the remote control to turn down the bass. The screen will show the decreased bass value.
②.You can adjust the bass between -7~7.
(4).Turn up/down Treble
① .Press“TRE+”on the remote control to turn up the treble. The screen will show the added treble value. Press“TRE-”on the remote control to turn down the treble. The screen will show the decreased treble value.
②.You can adjust the treble between -7~7.
Note:
Adjust the bass and treble properly, in case that it worsens the tune. Tuning the bass value and treble value to “0” is recommended.
21
Specification
1. H10 Power Amplifier
Power Output: 6W+6W (8Ω)
Frequency Response: 20Hz~22kHz (±1dB)
2. USB Storage Device
Support Type A USB Socket, Full Speed (12 Mbps)
3. FM Tuner
Tuner:FM Stereo
Frequency Range: 87.5~108.0 MHz (0.1 MHz Step Length)
Noise Limitation Sensitivity: 5uV
4. AUX Input Sensitivity
AUX IN(RCA):500 mV (RMS)
5. USB Sound Card
Support Type B USB Socket, Full Speed
Sample Rate: 32k, 44.1k, 48 kHz
6. Headphone Output
Headphone Socket:Stereo Headphone between 32Ω~300Ω
7. Speaker (H10)
Power: 50W
Impedance: 8Ω
Sensitivity: 89dB
Frequency Response: 60~24000Hz
8. Parameters
Alternative Voltage:100~240V,50/60Hz
Power Consumption:60W
Dimension of H10:188mm×165mm×68mm
Dimension of Speaker:178mm×165mm×172mm
Net Weight of Main Machine: 2.1 kg
Net Weight of Speaker: 6.5 kg
Working Condition: Temperature:-10 °C ~40 °C Moisture:20%~80%
Storage Condition:Temperature:-20 °C ~70 °C Moisture:20%~90%
22
Troubleshooting
Problem
Power (LCD) is OFF
Power (LCD) is ON
Sound Distortion
Noise output
Sound field Positioning is not so good
Cause
Power cord is not well-connected
Main fuse is out
Use the mute function
Volume is at ZERO
NO signal input
High input signal level
Remedy
Please check the power cable connection or power outlet connection
Replace with the same type and value fuse
Cancel the mute function by pressing“Mute” on the remote
control
Turn up the Volume
Check the function of the sound source
Check the input selection and switch to the proper input
Turn down the volume to suitable position
Ground of input signal cable is open or bad contact of the input signal cable
Components or circuits are in trouble
Signal input cables or speaker cables are wrongly connected
Replace the input signal cable with a new one
Please contact with local agents or our company
Reconnect it as suggested in the manual
23
advertisement