MiniProx
®
Reader
125 kHz Proximity
Mullion Mount Proximity Card Reader • 5365 (Wiegand), 5368 (Clock-and-Data)
ACCESS reliability.
Application
The MiniProx ® proximity card reader’s potted electronics enhance the security of the reader. The slim, attractive design is ideal for indoor or outdoor mounting.
Features w w
Accepts 5 to 16 volts, meeting most voltage requirements.
Available with Wiegand or Clock-and-Data interface. w w
Allows easy upgrade from magstripe to a proximity reader; no rewiring or pulling of new cable required.
Offers high reliability, consistent read-range and low power consumption in an easy-to-install package.
w w w
Mounts directly onto metal with no change in read range performance.
Provides multicolor LED, compatibility with all standard access control systems and internal or host control of LED and beeper.
Includes multilingual installation manual.
Features
Mounting
Hazardous
Location MiniProx ®
Reader Mounting
Audiovisual
Indication
Diagnostics
Indoor/outdoor
Design
Easily Interfaced
Security
Warranty
Unobtrusive design mounts directly onto metal including door mullions.
Designed to mount onto a junction box included with each reader. The junction box is attached to an appropriate surface location utilizing four holes.
When a proximity card is presented to the reader, the red LED flashes green and the beeper sounds. The multicolor LED and beeper can also be controlled individually by the host system.
On reader power-up, an internal self-test routine checks and verifies the setup configuration, determines the internal or external control of the LED and beeper, and initializes reader operation.
An additional external loop-back test allows for the reader outputs and inputs to be verified without the use of additional test equipment.
Sealed in a rugged, weatherized polycarbonate enclosure designed to withstand harsh environments, providing reliable performance and a high degree of vandal resistance.
Wiegand output model interfaces with all existing
Wiegand protocol access control systems. Clock-and-Data (magnetic stripe) model interfaces with most systems that accept magnetic stripe readers.
Recognizes card formats up to 85 bits, with over 137 billion unique codes.
Lifetime warranty against defects in materials and workmanship (see complete sales policy for details).
Part Numbers Base Part No.: 5365 Wiegand interface
Base Part No.: 5368 Clock-and-Data interface
Description: Tri-State LED, Internal beeper on
Options:
• CLASSIC series cover in white, beige, charcoal gray, or black
(or)
• Designer series cover in white, wave blue, charcoal gray, or black
• LED and beeper operation
• custom label
* Hazardous Location MiniProx ® strip.
only available with terminal
(Please see “How to Order Guide” for a description of the options and associated part numbers.)
Hazardous Location MiniProx shown with incorporated junction box rated for use in hazardous locations.
Specifications
Typical Maximum* Read Range
ProxCard
ISOProx
DuoProx
®
®
® II card - up to 5.5” (14 cm)
II card - up to 5” (12.7 cm)
II card – up to 5” (12.7 cm)
Smart ISOProx ® /DuoProx
Proximity & MIFARE ®
ProxCard ®
® cards – up to 5” (12.7 cm)
card - up to 5” (12.7 cm)
Plus card - up to 2” (5.1 cm)
ProxKey ® II keyfob - up to 2” (5.1 cm)
MicroProx ® Tag - up to 2.5” (6.4 cm)
*Depending on local installation conditions.
Dimensions:
6.0” x 1.7” x 1.0”
(15.2 x 4.3 x 2.54 cm)
Material: Polycarbonate UL 94
Power supply:
Standard MiniProx: 5-16 VDC
Haz. Loc. MiniProx: 5-16 VDC
Linear power supplies are recommended.
Current requirements:
Max Average 30 mA
Typ Peak: 75 mA
Operating temperature:
-22° to 150° F (-30° to 65° C)
Operating humidity:
0-95% relative humidity non-condensing
Weight:
With terminal strip: 3.5 oz. (99 g)
With pigtail: 3.8 oz. (108 g)
Haz. Loc. MiniProx: 3.8 oz. (108 g)
Transmit frequency: 125 kHz
Excite frequency: 125 kHz
Cable distance:
Wiegand interface: 500 feet (150 m)
Clock-and-Data interface: 50 feet (15 m)
Recommended cable is ALPHA 1295 (22 AWG) 5 conductor minimum stranded with overall shield or equivalent. Additional conductors may be required for LED or beeper control.
Environmental: IP55
Certifications:
UL294/cUL (US), FCC Certification (US), IC (Canada), CE (EU),
C-tick (Australia, New Zealand),
SRRC (China), MIC (Korea), NCC (Taiwan), MIC (Japan), iDA
(Singapore), RoHS
Hazardous Part Only: Canada/UL 1604 Listed (with Haz. Loc. junction box only):Hazardous Locations Class I, Div. 2, Groups
A,B,C,D.
ACCESS experience.
HID Global Offices:
Corporate
North America
15370 Barranca Pkwy
Irvine, CA 92618
U.S.A.
Phone: (800) 237-7769
Phone: (949) 732-2000
Fax: (949) 732-2360
Asia Pacific
19/F 625 King’s Road
North Point
Island East
Hong Kong
Phone: +852 3160-9800
Fax: +852 3160-4809
© 2009 HID Global. All rights reserved. HID, and the HID logo are trademarks or registered trademarks of HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. Rev. 05/2009
MKT-MINIPROX-DS-EN hidglobal.com
Latin America
Circunvalacion Ote. #201 B
Despacho 2
Col. Jardines del Moral
Leon 37160, Gto.
Mexico
Phone: +52 477 779 1492
Fax: +52 477 779 1493
Europe, Middle East & Africa
Haverhill Business Park
Phoenix Road
Haverhill
Suffolk
CB9 7AE
England
Phone: +44 (0) 1440 714 850
Fax: +44 (0) 1440 714 840
