8

Operating Instructions Operating Instructions

HDMI Splitter over UTP cable

Model No.:MP-SP18

Operating Instructions

MP-SP18

Dear Customer

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

FEATURES

Distributes 1 input HDMI signal to 1 HDMI output and 7 UTP method HDMI outputs.

Transmission distance up to 50m under 1080P (the transmission distance for the receiver also need up to 50m)

IR call back function to control the source from TV side.

DIP switch setting to control EDID.

Supports Resolutions up to 1080p

Supports High Definition Audio : Dolby TrueHD, Digital Plus, DTS-HD Master Audio

Supports 30/36bit deep color display.

With Mounting ears

Support 3D video format

DC 12V power

NOTICE

Our company reserve the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice.

1

2

Operating Instructions

TABLE OF CONTENTS

Specifications

Package Contents

Panel Descriptions

Connecting and Operating

DIP Switch EDID setting index

Typical Application

Maintenance

Product Service

Warranty

SPECIFICATIONS

Operating Temperature Range ....................................................................................................................-5 to +35℃(-41 to +95℉)

Operating Humidity Range ..............................................................................................................5 to 90%RH (No Condensation)

Video Amplifier Bandwidth ..................................................................................................................................................140MHz

Input Video Signal

Input DDC Signal

Data transfer speed rate

Support Video Format

....................................................................................................................................0.5-1.0 Volts P-P

......................................................................................................................................5 volts p-p(TTL)

..............................................................................................................................6.75Gbps(Maximum)

........................................................................................VGA:640x480,800x600,1024x768,1080x1024

DTV/HDTV:480i/576i/480P/576P/720P/1080i/1080P

3D video

Vertical Frequency range .......................................................................................................................................................60Hz

HDMI Output .............................................................................................................................HDMI 1.3 b+HDCP1.2

Support Video Color Format .........................................................................................................................xv-YCC/deep color 36bit

Support Audio Format

Transmission Distance

Power consumption

Dimension (L×W×H)

............................................................................................DTS-HD Master Audio、Dolby true-HD etc.

............1080P 8-bit 50m(If needed, HDMI extender is optional )Over UTP cat5e/6 cable/24AWG/Solid

................................................................................................................................15watts(Maximum)

.....................................................................................................................................268x152x43mm

Net Weight ....................................................................................................................................................1320g

Note1: Specifications are subject to change without notice. Mass and dimensions are approximate.

Note2: When in 36Bits deepcolor mode, we suggest set the HDMI source device to output 1080i or 720p.

PACKING CONTENTS

（1） Main Unit. 1x8 HDMI Splitter via UTP cable

（2） DC12V 3A Power Supply

（3） Operating Instructions

（4） IR-TX cable

（5） Mounting ears

Operating Instructions

LIMITED WARRANTY LIMITS AND EXCLUSIONS

1) This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear

and tear or cosmetic damage.

The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment,or failures which are caused by products

not supplied by warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication,

alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line

surge, lightning damage, modification, or service by anyone other than a Factory Service center or other Authorized Servicer,

or damage that is attributable to acts of God.

2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY COVERAGE". THE WARRANTOR IS NOT

LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY

BREACH OF THIS WARRNTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an

installed unit if applicable, travel to and from the service, loss of or damage to media or images, data or other recorded content.

The items listed are not exclusive, but are for illustration only.)

3) PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.

7

4

Operating Instructions

Connecting and Operating

1) Connect the HDMI input sources into HDMI splitter(Input cables are optional).

2) Connect two CAT-5E/6 cables to both the STP/UTP outputs of HDMI splitter and inputs of STP/UTP receiver .

Please pay attention to the sequence of the two cables,Cat O/1->receiver 1, CatO/2->receiver 2. (The cable termination

must follow the standard of EIA/TIA 568B, ).

3) Connect the HDMI output (such as HD-LCD/HD-DLP) into the STP/UTP receiver.

4) Connect the IR RX receiving cable into STP/UTP receiver IR RX and connect The IR TX cable into HDMI splitter IR emitter.

5) Insert the DC side of 12v power supply into HDMI splitter and the unit is ready to use .

6) Turn on the power.

Attention: Insert/Extract cables gently.

DIP Switch EDID setting index

Position1

0

0

0

0

1

1

1

1

Position2

0

0

1

1

0

0

1

1

Position3

0

1

0

1

0

1

0

1

Function

1080P stereo (Using Embedded EDID) (note 1)

1080P 5.1 (Using Embedded EDID) (note 2)

Edid auto mix, mix result is compatible with all HDMI sinks (note 3) copy the first detected HDMI output's edid to the input port (note 4)

LC mode, 1080P stereo (Using Embedded EDID) (note 5)

LC mode, Edid auto mix, mix result is compatible with all HDMI sinks (note 6)

LC mode, copy the first detected HDMI output's EDID to the input port (note 7)

Fix single UTP output (note 8)

Note1: The splitter will use the embedded 1080P-stereo EDID when the DIP switch is in this mode. The EDID will be 1080P video

and stereo audio

Note2: The splitter will use the embedded 1080P-5.1 EDID when the DIP switch is in this mode. The EDID will be 1080P video

and 5.1 audio

Note3: The splitter will mix the EDID data of all HDMI sinks. And forward this mixed EDID to the HDMI source device. The thought

of EDID mixing is to enable all the connected sink device can have video and audio they can output. For example, One

TV is 1080P, stereo, another is 1080i, 5.1 audio. The mixed EDID will be 1080i, stereo audio

Note4: Copy the EDID data to the input port. It will copy the EDID data from the first detected output port

Note5: Please refer to Note1. The only difference is that if video appears noise or interference when the long HDMI/UTP cable

is used or the quality of HDMI/UTP cable is not so good, use this mode.

Note6: Please refer to Note 3. The only difference is that if video appears noise or interference when the long HDMI/UTP cable

is used or the quality of HDMI/UTP cable is not so good, use this mode

Note7: Please refer to Note 4.The only difference is that if video appears noise or interference when the long HDMI/UTP cable

is used or the quality of HDMI/UTP cable is not so good, use this mode

Note8: Fix single UTP output, use the embedded 1080P-stereo EDID

Typical Application

Play 00:21

Blue-Ray Player

MP-SP18

Cat5e/6

Cat5e/6

Cat5e/6

Cat5e/6

Cat5e/6

Cat5e/6

Cat5e/6

Output

IR-RX

Output

IR-RX

Output

IR-RX

Output

IR-RX

Output

IR-RX

Output

IR-RX

Output

IR-RX

Operating Instructions

5

6

Operating Instructions

MAINTENANCE

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit.

PRODUCT SERVICE

1) Damage requiring service: The unit should be serviced by qualified service personnel if:

1>The DC power supply cord or AC adaptor has been damaged;

2>Objects or liquids have gotten into the unit;

3>The unit has been exposed to rain;

4>The unit does not operate normally or exhibits a marked change in performance;

5>The unit has been dropped or the cabinet damaged.

2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating instructions. Refer all other

servicing to authorized servicing personnel.

3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have

the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.

4)Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working

condition.

WARRANTY

If your product does not work properly because of a defect in materials or workmanship, our Company (referred to as "the warrantor" ) will, for the length of the period indicated as below, (Parts(1)Year, Labor(90) Days) which starts with the date of original purchase

("Limited Warranty period"), at its option either(a) repair your product with new or refurbished parts, or (b) replace it with a new of a refurbished product. The decision to repair or replace will be made by the warrantor.

During the "Labor" Limited Warranty period there will be no charge for labor.

During the "Parts" warranty period, there will be no charge for parts. You must mail-in your product during the warranty period.

This Limited Warranty is extended only to the original purchaser and only covers product purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service.

MAIL-IN SERVICE

When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone and/or email address where you can be reached.

PANEL DESCRIPTIONS

Front Panel

Operating Instructions

Rear Panel

5 6 7 6

（1） Indicators of HDMI output:when a HDMI equipment is connected the corresponding LED lit

（2） Power button:when power on,the power status LED lit

（3） Power input port

（4） EDID setting

（5） HDMI output port

（6） UTP output ports

（7） HDMI input port

（8） IR/TX output port

8

3