A NEW STANDARD
FOR VALUE IN THE INDUSTRY!
TTP-247 . TTP-345
E
``
\, N
DESKTOP THERMAL TRANSFER BAR CODE PRINTER
TSC™ is pleased to announce the release of the
TTP-247 thermal transfer desktop printer series.
As has become expected of TSC™, the TTP-247
printer introduction sets yet another new standard
for value in the industry offering outstanding quality
and high performance at low cost to the consumer.
Based on the same design and mechanism of the
TTP-245 Plus bestseller from TSC™, the 4” wide
TTP-247 printer runs at an impressive 7 ips print
speed with 203 dpi resolution and 5 ips with 300
dpi version. It offers a generous memory capacity
of 8 MB of SDRAM, 4 MB of onboard Flash and the
ability to add gigabytes of Flash memory via an
onboard SDHC card reader.
TTP-247 series features hardwire standard USB 2.0,
Parallel and Serial connectivity plus an optional
Ethernet port for use in any environment. Its
TSPL-EZ™ printer control language is fully
compatible with other TSC™ printer languages and
also features TPLE (Translation Printer Language
Eltron®) and TPLZ (Translation Printer Language
Zebra®) The printer simply translates each label
format as it is sent to theprinter and prints.
TSPL-EZ™ also features internal scalable True Type
fonts using the Monotype® font engine that are
typically only found in more expensive printers.
Same as TTP-245 Plus series, the user-friendly
clamshell design with double-walled construction
makes TTP-247 series unparalleled ease of use and
the strongest thermal transfer mechanism in the
industry. lts innovative two motor gear driven design
provides enough horsepower to handle 300 meter
long ribbons and up to 8.4” OD rolls of labels. By
using two motors instead of the usual one, the motors
operate at a lower torque, making the printer more
durable while producing a quiet operating
environment.
Loading ribbon has never been easier in a desktop
printer. TTP-247 series provides plenty of finger room
to easily load and unload ribbons, and the 300 meter
capacity is more than four times longer than the
industry standard for desktop printers. Labels stored
inside the printer can be up to a 5” OD roll on a 1”
core. Using an optional external media hanger, the
printers can easily work with a full 8.4” OD roll of
labels on a 3” core.
With its faster printing speed, richer features, larger
media/ribbon capacity, strongest mechanism design
and most reasonable price in its class, TTP-247 series
is absolutely your best choice of a desktop thermal
transfer bar code printer!
The Smarter Choice.
Value . Performance . Support
DESKTOP. THERMAL TRANSFER BAR CODE PRINTER
TSC
The Smarter Choice.
Printer Model
Resolution
Printing method
Print speed
Max. print width
Max. print length
Enclosure
Physical dimension
Ribbon capacity
Label roll capacity
Processor
Memory
Interface
Power
Operation switch, button
Sensors
Internal font
Bar code
Font & barcode rotation
Printer language
Media type
Media wound type
Media width
Media thickness
Media core diameter
Label length
Label length (peeler mode)
Label length (cutter mode)
Environment condition
Safety regulation
Accessories
Limited warranty
Factory option
Dealer option
User option
TTP-247
203 DPI
TTP-345
300 DPI
Thermal Transfer & Direct Thermal
2,3, 4,5, 6, 7ips selectable | 2, 3, 4, 5 ips selectable
2, 3 ips selectable with peel function 2 ips selectable with peel function
108 MM (4.25") ) 106 mm (4.17%)
2,286 mm (90") 1,016 mm (40%)
Double-walled plastic
314 mm (L) x 213 mm (W) x 188 mm (H)
12.36“ (L) x 8.39“ (W) x 7.40“ (H)
300 meter, 1” core
127 mm (5") OD
32-bit RISC high performance processor
' 9 4 MB Flash memory
' © 8 MB SDRAM
: © SD card reader for memory expansion, up to 4 GB
: © RS-232 (max. 115,200 bps)
' ® Centronics
: © USB 2.0 (full speed mode)
| AC Input: 100-240V univarsal switching power supply
DC output: 24V 3.75A (external adaptor)
| One power switch, one feed button & one LED (3 colors)
: © Gap transmissive sensor (offset 6 mm from liner edge)
® Moveable black mark reflective sensor
' 9 Head open sensor
' 9 Ribbon end sensor
® Eight alpha-numeric bitmap fronts
' 9 One Monotype Imaging? CG Triumvirate Bold Condensed scalable font
; 9 Built-in Monotype? True Type Font engine
11D bar code
Code 39, Code 93, Code 128UCC, Code 128 subset A, B, C, Codabar, Interleave 2 of 5,
EAN-8, EAN-13, EAN-128, UPC-A, UPC-E, EAN and UPC 2 (5) digits add-on, MSI,
PLESSEY, POSTNET, RSS-Stacked, GS1 DataBar, Code 11
2D bar code
PDF-417, Maxicode, DataMatrix, QR Code, Aztec
0, 90, 180, 270 degrees
TSPL-EZ™
Continuous, die-cut, black mark, fan-fold, notch
Outside wound
20~112 mm (0.78" ~ 4.4")
0.06-0.19 mm (2.3 ~ 7.4 mil), max. 150 g/m?
25.4-76.2 mm (1"-3")
Min. 10 mm (0.4
25.4-152.4 mm (1”-6”)
25.4-2,286 mm (1-90) | 25.4~1,016 mm (1“~40%)
Operation: 5~40°C (41~104°F), 25~85% non-condensing
Storage: -40~60°C (-40~140°F), 10~90% non-condensing
FCC Class B, CE Class B, C-Tick Class B, UL, CUL, TUV/Safety, CCC
ı ® Windows labeling software CD disk
: © Quick start guide
: © USB cable
! © External universal switching power supply
; 9 Power cord
: © Label spindle, fixing tab x 2, 1.5“ core adapter x 2
© Ribbon spindle x 2
: © Ribbon rewind spindle paper core
: © Printer: 2 years
' e Print head: 1 million inches (25 km) or 12 months which comes first
: © Platen: 50 km
: © Real time clock
| e Main board intergrated with internal Ethernet
' e Peel off module assembly
' ® Guillotine cutter
| Full cut: Paper thickness: 0.06~0.19 mm, 500,000 cuts
| Partial cut: Paper thickness: 0.06~0.12 mm, 500,000 cuts
Paper thickness: 0.19 mm, 200,000 cuts
'@ Keyboard display unit (KU-007 Plus and KP-200 Plus)
| © Long range linear imaging bar code scanner (HCS-200)
' 9 External roll mount, media OD. 214 mm (8.4”) on a 1” or 3” core
‚ ® 3” core label spindle
' 9 Bluetooth module
TSC is a trademark of TSC Auto ID Technology Co., Ltd.
TSC Auto ID Technology Co., Ltd. is an ISO 9001/14001 registered company.
© 2010 TSC Auto ID Technology Co., Ltd.
Specifications are subject to change without notice.
Contact your TSC sales representative for specific information.
Web site: www.tscprinters.com
">
