HDC Series HDC-2000 Series, HDC-P1, HDC-4300

HDC Series

HDC-2000 Series, HDC-P1, HDC-4300

HD System Camera

2

Sony HD Cameras –

Setting a New Benchmark of Performance and Creativity

Over the years, Sony has established a powerful lineup of solution for HD studio operations, with its HDC Series cameras along with a wide range of accessories to enhance your creative options.

Sony’s flagship model, the HDC-2000 Series, has been accepted as a worldwide standard with its excellent picture quality realized by cutting-edge technologies.

For even higher levels of creativity, Sony offers the HDC-4300 super-motion camera with 4K capability and a Point-of-View (POV)-style HD camera, the HDC-P1. In addition to various camera head choices, these systems also boast various options such as a stunning 7-inch OLED viewfinder and a large lens adaptor that enables rapid attachment without fine adjustment. Also, the intelligent transmission interface unit

HDFA-200 brings simple 3D multi-camera system operation. As all options are compatible with the HDC Series, you can build your own camera system to meet your precise needs.

With their innovative high performance, advanced operability, and field-proven high reliability, the HDC Series is a stunning acquisition tool for a broad range of

HD production applications.

HDC-2000 Series Multi-Format HD Camera System

HDC-2500

The HDC-2000 Series* 1 has been accepted as a worldwide standard with its excellent picture quality realized by cutting-edge technologies, including high-performance 2/3-inch CCD image sensors and a digital signal processor (DSP) with a 16-bit A/D converter.

In addition, the HDC-2000 Series incorporates a 3-Gbps high bit-rate fiber transmission system as standard which enables double-speed acquisition for exquisite picture-quality slow motion.

Together with these cameras, Sony offers two types of camera control unit for the HDC-2000 Series. Also, exchangeable outside panels are provided for flexible operation through fiber, triax, or wireless infrastructures.

Furthermore, Sony offers an upgrade path for tomorrow’s 4K operation to owners of the HDC-2000, HDC-2500, and HDC-2400.

With the optional HKCU-2040 4K/HDR Processor Board installed in the HDCU-2000 or HDCU-2500 Camera Control Unit, these cameras can be operated together with the HDC-4300 4K Camera in a 4K live camera system.

The HDC-2000 Series is a powerful tool for now and for the future.

*1 Please refer to the table below to see the supported formats for each camera head.

Studio Camera Portable Cameras

HDC-2000

Optical-fiber interface

1080/50i, 1080/59.94i

1080/23.98p, 1080/24p, 1080/25p, 1080/29.97p

1080/50p, 1080/59.94p, 720/50p, 720/59.94p

1080/100i* 2 , 1080/119.88i* 2 ,

720/100p* 2 , 720/119.88p* 2

3840/50p* 6 , 3840/59.94p* 6

HDC-2500


1080/50i, 1080/59.94i

1080/23.98p, 1080/24p, 1080/25p, 1080/29.97p

1080/50p, 1080/59.94p, 720/50p, 720/59.94p

1080/100i* 2 , 1080/119.88i* 2 ,

720/100p* 2 , 720/119.88p* 2

3840/50p* 6 , 3840/59.94p* 6

HDC-2400


1080/50i, 1080/59.94i

720/50p, 720/59.94p

1080/23.98p* 3 , 1080/24p* 3 , 1080/25p* 3 ,

1080/29.97p* 3 , 1080/50p* 4 , 1080/59.94p* 4 ,

1080/100i* 5 , 1080/119.88i* 5 ,

720/100p* 5 , 720/119.88p* 5

3840/50p* 6 , 3840/59.94p* 6

HDC-2570

Progressive digital triax interface

1080/50i, 1080/59.94i

720/50p, 720/59.94p

1080/50p* 4 , 1080/59.94p* 4

*2 Double-speed acquisition format for slow-motion *3 Optional HZC-PSF20 software is required. *4 Optional HZC-PRV20 software is required. *5 Optional HZC-DFR20 software is required. *6 Optional HKCU-2040 Board is required to be installed into HDCU-2000/2500.

3

4

HDC-2000 Series Cutting-edge Technologies

Highly Acclaimed Progressive CCD

Based on Sony’s HAD sensor technology and the latest on-chip lens structure, this 2/3-inch type 2.2-megapixel* 1 full-HD progressive CCD offers high sensitivity of F11 (at 1080/50i) or F10 (at 1080/59.94i) at 2,000 lx, and a superior signal-tonoise ratio of -60 dB even without digital noise suppression.

In addition, a wide variety of capturing formats are available, including 1080/50i,

1080/59.94i, 1080/23.98p, 1080/24p, 1080/25p, and 1080/29.97p.

What’s more, this CCD can capture top-quality 1080/50p or 1080/59.94p images

– a capability that also delivers the highest quality 720/50p or 720/59.94p image acquisition.

Double-speed acquisition for excellent slow-motion picture quality is available in

1080/100i* 2 , 1080/119.88i* 2 , 720/100p* 2 , and 720/119.88p* 2 modes.

*1 Actual picture area.

*2 Optional HZC-DFR20 software is required for the HDC-2400 and HDC-2570.

Servo-controlled ND and CC Filters*

3

HDC-2000, HDC-2500, and HDC-2570 cameras are equipped with dual optical filter wheels for ND (Neutral Density) and CC (Color Correction) which can be remotely controlled by any remote control panel (RCP) or master setup unit

(MSU), as well as directly controlled by the camera head.

*3 The HDC-2400 is equipped with a single optical filter wheel for ND.

State-of-the-art DSP LSI with 16-bit A/D Conversion

The DSP LSI developed for the HDC-2000 Series supports 1080/50p and

1080/59.94p progressive formats, and 16-bit resolution, making full use of the high-clarity images captured by the CCD. Additionally, high-resolution A/D conversion allows faithful reproduction of gradation in mid-to-dark-tone areas of the picture. White balance, white shading, and flare are digitally corrected, allowing for stable image correction. Moreover, the new version of the Auto Lens

Aberration Compensation 2 (ALAC2) function is incorporated to optimize lens performance, providing stunning picture quality by highly improved horizontal and vertical compensation.

3-Gbps Optical Fiber Transmission

HDC-2000, HDC-2400, and HDC-2500 cameras offer a 3-Gbps transmission capability as standard. This high-performance feature enables you to shoot in various capturing formats.

Each camera comes equipped with a SMPTE-standard optical fiber interface for connecting its associated HDCU-2000 or HDCU-2500 Camera Control Unit.

In addition to achieving exceptional quality, these cameras can transmit alldigital bi-directional video and audio signals, a control line, and a prompter line over extremely long distances – up to 4,000 meters (13,123 feet)* 4 with the

HDCU-2000, and 2,000 meters (6,562 feet)* 4 with the HDCU-2500.

*4 When supplying power to the camera via optical fiber cable, maximum cable length depends on camera system configuration, lens type, the size of the optical fiber cable, and the number of cable connectors.

Network TRUNK*

5

The Network TRUNK function (LAN port) allows for data transmission between the camera and the CCU at up to 1 Gbps, which supports new system configurations being used with various IP-based products.

*5 Optional HKC-FB20 and HKC-CN20 side panels are required for the HDC-2570.

HDC-2000 Series Cutting-edge Technologies

Compact and Lightweight Camera Body

HDC-2400, HDC-2500, and HDC-2570 cameras incorporate carbon fiber reinforced plastic (CFRP) in their outside panel. With a strong and lightweight body, these cameras are highly mobile and can be operated even in the toughest shooting conditions.

The HDC Series provides stable handling, owing to its low center of gravity. You can easily adjust the shoulder pad into a well-balanced position without needing to use a screwdriver. Also, a wide viewable area beneath the handle provides you with a broad field of view, ideal for handheld camera operation. HDC-2000 studio cameras also offer great ergonomic design to increase ease of use.

Noise Suppression Function

The HDC-2000 Series has a Noise Suppression function which reduces the high-frequency noise elements in video signals by using Sony’s advanced digital signal processing technology.

Two Types of Focus Assist Functions

The Viewfinder Detail function adds dedicated image-enhancing edge signals directly to the viewfinder, helping you to recognize a focusing point.

The Focus Assist Indicator displays an indicator for adjustment at the bottom

(or another selected position) of the viewfinder frame. This is helpful especially when shooting with a wide-viewing angle.

HDC-2000

5

HDC-2000 Series Flexibility

Easy Transmission Change

The transmission system can be easily changed between fiber, triax, and wireless transmission by replacing parts assembled in the outside panels* 1 .

In addition, since all replacement connectors are located in the outside panels, camera balance is maintained.

*1 The optional HKC-CN20 is required to attach an outside panel.

HKC-FB20 : Optical Fiber Transmission Adaptor

HKC-TR27 : Digital Triax Transmission Adaptor

HKC-WL20 : Wireless Module Adaptor

HDC-2400

HDC-2500

Upgrade Software to Expand Creativity

An upgrade path is provided from the basic model HDC-2400 to the full-featured flagship model HDC-2500. You can select the configuration with the following optional software including special versions that operate for a limited time period, according to your needs* 2 .

*2 To upgrade from the HDC-2400 to the HDC-2500, an optional HKC-DF20 Dual Optical Filter Unit is required.

HZC-PSF20 : Support Software for PsF format

HZC-PSF20M : Support Software for PsF format (30-day limited period)

HZC-PSF20W : Support Software for PsF format (7-day limited period)

HZC-PRV20 : 50p/59.94p Software

HZC-PRV20M : 50p/59.94p Software (30-day limited period)

HZC-PRV20W : 50p/59.94p Software (7-day limited period)

HZC-DFR20 : Double-speed Capturing Software for Slow Motion

HZC-DFR20M : Double-speed Capturing Software for Slow Motion

(30-day limited period)

HZC-DFR20W : Double-speed Capturing Software for Slow Motion

(7-day limited period)

HZC-UG444 : User Gamma-compatible Software

HZC-UG444M : User Gamma-compatible Software (30-day limited period)

HZC-UG444W : User Gamma-compatible Software (7-day limited period)

Double-speed Acquisition for Slow Motion*

3

With a 3-Gbps wideband transmission capability, the HDC-2000 Series offers a double-speed acquisition function in 1080/100i, 1080/119.88i, 720/100p, or

720/119.88p mode. This transmits a high-quality image to the HDCU-2000 or

HDCU-2500 Camera Control Unit (CCU) using an optical hybrid cable.

In addition, normal-speed image acquisition by 1080/50i, 1080/59.94i, 720/50p, or

720/59.94p can also be output in parallel, with double-speed acquisition from the CCU.

This means there is no need to set up an additional camera just for double-speed shooting.

*3 Optional HZC-DFR20 software is required for the HDC-2400 and HDC-2570.

Normal speed

HDC-2500

3-Gbps Fiber transmission

(Standard feature) HDCU-2000/HDCU-2500

PWS-4500

Double-speed capturing

6

HDC-2000 Series Versatile System Components

HDTX-200 HD Digital Triax Adaptor (Camera-side)

HDFX-200 HD Digital Triax Adaptor (HDCU-side)

HDTX-200 and HDFX-200 HD Digital Triax Adaptors are available to convert optical fiber transmission to widely used triax transmission. The HDTX-200 adaptor is used with the HDC-2000,

HDC-2400, or HDC-2500 camera* 1 to convert its camera output to triax, while the HDFX-200 adaptor is used with the HDCU-2000 or

HDCU-2500 camera control unit to receive triax signals from the camera.

These triax-based systems enable high-quality images to be transmitted from the camera over a long distance – up to 1,400 meters (4,593 feet)* 2 with a ø14.5 mm triax cable or 1,000 meters

(3,281 feet)* 2 with a ø13.2 mm triax cable.

*1 The HDC-2570 does not require the HDTX-200 unit because it is equipped with a triax output as standard.

*2 When supplying power to the camera via an optical fiber cable and/or a triax cable, maximum cable length varies with the camera system configuration, lens type, viewfinder type, and the size of the optical fiber cable.

HDTX-200

Triax and Optical Fiber Operation

HDFX-200

TRIAX CABLE

OPTICAL FIBER CABLE

HDC-2570

HDC-2570+HDLA-1500/HDLA-1505

HDFX-200

HDCU-2000

HDCU-2500

HDC-2000

HDCU-2000

Max. 200 m* 3

HDTX-200

HDFX-200

HDCU-2500

HDC-2500+HDLA-1500/HDLA-1505

Max. 1,800 m* 4

HDCU-2000

Max. 800 m* 3

HDTX-200

HDC-2500/HDC-2400 HDFX-200

HDCU-2500

Max. 4,000 m* 4

HDCU-2000

HDC-2500/HDC-2400

(with HKC-TR27 and

HKC-CN20 installed)

Max.1,400 m (Ø14.5 mm)

Max.1,000 m (Ø13.2 mm)

HDFX-200

HDCU-2500

*3 The maximum cable length varies with the camera system configuration, lens type, and viewfinder type.

*4 The maximum cable length varies with the camera system configuration, lens type, and viewfinder type. Maximum length is achieved when the HDCU-2000 is connected.

7


HDCE-200 Camera Extension Adaptor for

Third-party Products

This camera extension adaptor realizes long-distance transmission. The

HDCE-200 is designed for connecting a camera to a camera control unit (CCU) and converting the link format between them from BNC to optical fiber. This unit also integrates with third-party products through its coax mode connection.

It supports long-distance HD production with a single mode fiber cable, installing HKC-SM27 into the HDCE-200 for camera-side and HDFX-200 for the

CCU side and connecting the system elements together.

In addition, the HDCE-200 can be used by connecting the BPU-4000 Baseband

Processor Unit and, in this configuration, it supplies power to the CA-4000

Camera System Adaptor in Extension mode.

(2) Single mode fiber transmission for the HDC Series

HDC-2000

HD Color Camera

HDC-2500/2400

HD Color Camera

+Large Lens Adaptor

HDC-2500/2400

HD Color Camera

Optical Fiber

Cable

HDCE-200

Camera Extension

Adaptor

Single Mode

Fiber Cables (2)

OPTICAL CONDITION

CAM

CCU

HDFX

POWER

CAM

MODE

TRIAX

MAIN

TRIAX ALARM

OPEN

SHORT

FIBER

FAN STOP

HD DIGITAL TRIAX CCU ADAPTOR HDFX200

HDFX-200*

HD Digital Triax

CCU Adaptor

Optical Fiber

Cable

HDCU-2000

HD Camera Control Unit

HDCU-2500

HD Camera

Control Unit

Switching Hub

RCP-1500 Series

Remote Control

Panel

HDCE-200

(1) Coax mode with third-party products

HDC-2000

HD Color Camera

3rd-party

Product

3rd-party

Product

HKC-SM27

HDCU-2000


* Single mode fiber kit HKC-SM27 is required.

MSU-1000/1500

Master Setup Unit

(3) Extension mode (power supply to the camera from the BPU)

CA-4000

Camera System Adaptor

Optical Fiber Cable Optical Fiber Cable

HDC-2500/2400

HD Color Camera

+Large Lens Adaptor

HDC-2500/2400

HD Color Camera

HDCE-200

Camera Extension

Adaptor

Optical Fiber

Cable

BNC Cable

HDCU-2500

HD Camera

Control Unit

Switching hub

RCP-1500 Series

Remote Control

Panel

PMW-F55

Solidstate Memory Camcorder

SKC-4065

F65 Adaptor

BPU-4000

Baseband Processor Unit

HDCE-200

Camera Extension

Adaptor

MSU-1000/1500

Master Setup Unit

F65

Digital Motion Picture Camera

CA-4000

Camera System

Adaptor

+ SKC-PB40

Camera Power

Boost Kit

8

HDC-2000 Series Creative Versatility

Multi-matrix Function

The Multi-matrix function of the HDC Series allows color adjustments to be applied over a user-specified color range. The color spectrum is divided into

16 areas of adjustment, where the hue and/or saturation of each area can be modified.

Multi-matrix OFF Multi-matrix ON

Simulated images

Natural Skin-tone Detail Function

The Natural Skin-tone Detail function lets you control the tone of human skin by making certain areas smooth while keeping specific areas sharp. This function is particularly effective in maintaining eyebrows when human skin tone is touched up.

Adaptive-matrix Function

This enables ideal color conversion for shooting even under excessively strong ambient lighting conditions such as live shooting under bright monochromatic blue light. These conditions would typically cause a conventional matrix function to exceed the color conversion range.

Knee Saturation Function

Traditionally, shooting very bright portions of an object (such as key light conditions from a person’s forehead) can reduce color saturation and change the hue in highlight areas. HDC-2000 Series cameras adopt a Knee Saturation function, in which the “washed-out” effect caused by saturation and hue change is reduced to a minimum. This function provides far more natural color reproduction in highlighted areas.

Natural Skin-tone Detail OFF Natural Skin-tone Detail ON

Simulated images

Knee Saturation OFF Knee Saturation ON

Simulated images

Digital Extender Function

Digital Extender function expands the size of the image by a factor of two in the center of the image sensor’s captured image. This function works without decrease in sensitivity, such as an F-number drop, which typically occurs when using conventional optical extender functions.

9

HDC-2000 Series Creative Versatility

Low-key Saturation Function

With conventional cameras, low light areas can be subject to a reduction in saturation. This results in under-saturated colors in those areas. The Low-key

Saturation function on the HDC-2000 Series eliminates this problem by optimizing the amplification of color saturation in low light areas, providing more natural color reproduction.

HyperGamma

HyperGamma is a set of transfer functions designed to provide powerful contrast.

These functions are simply accessed via the setup menu, and you can select one of the four types of curves according to your needs and conditions. For example, you can select to enhance natural reproduction in low-key areas, to achieve greater flexibility in wide dynamic scenes.

Output [%]

120

Low Light Condition

100

80

60

40

20

0

0 100 200 300

Standard

HyperGamma 1

HyperGamma 2

HyperGamma 3

HyperGamma 4

400

HyperGamma curve

500 600

Iutput [%]

Low-key Saturation OFF Low-key Saturation ON

Selectable Gamma Table

The selectable gamma table provided with this camera series allows you to create a specific look for a picture by selecting from a choice of fixed gamma patterns.

Variable Black Gamma Function

This feature helps bring out details from the dark areas of an image without affecting mid-tones.

Standard Video Gamma Variable Black Gamma ON

Simulated images

High Contrast Scene

Simulated images

User Gamma*

1

User Gamma is another useful gamma feature, which allows for the creation of customized gamma curves. You can edit gamma curves using the CVP File

Editor* 2 gamma creation software running on a Microsoft Windows PC, and then quickly load them onto HDC-2000 Series cameras via a USB memory stick or an

MSU/RCP using Memory Stick™ Duo. The software has an easy-to-use GUI that allows the gamma curve to be visually edited simply by plotting the x and y values of each point of the curve.

*1 Optional HZC-UG444 software is required for the HDC-2400 and HDC-2570. An optional HKC-FB20 side panel is also required for the HDC-2570.

*2 Available via Sony’s download site.

10


HDC-2000 Series cameras are compatible with a variety of new and legacy peripherals including camera control units, remote controllers, command network units, and master setup units. This gives you flexibility to configure a system according to your needs both in the studio and out in the field. Optional HDTX-200 and HDFX-200 Digital Triax Adaptors are available for HDC-2000, HDC-2400, and HDC-2500 optical fiber-based cameras to enable triax-based operation.

HDCU-2000 Full-rack-size Camera Control Unit

HDCU-2500 Half-rack-size Camera Control Unit

You can configure the HDC-2000 Series with two types of camera control unit – the full-rack-size HDCU-2000, and half-rack-size HDCU-2500. The optical fiber transmission system used in these units maintains the camera’s high picture quality across cable runs of up to 4,000 meters (13,123 feet)* 1 with the

HDCU-2000, and up to 2,000 meters (6,562 feet)* 1 with the HDCU-2500. Both models are equipped with a range of built-in interfaces such as 3G-SDI/HD-SDI/

SD-SDI outputs, 3G-SDI/HD-SDI/SD-SDI/analog composite return inputs, and a down-converted analog composite monitor output. In addition, a variety of output interfaces are offered via optional boards, which can be installed in six slots on the HDCU-2000 and two slots on the HDCU-2500. Furthermore, the LAN interface (10BASE-T/100BASE-TX) that is built into both CCUs allows you to control the camera over a network.

Both the HDCU-2000 and HDCU-2500 CCU are equipped with menu buttons and indicators that show the status of optical transmission on the front panel, providing greater operability.

*1 When supplying power to the camera via an optical fiber cable, maximum cable length varies with camera system configuration, lens type, viewfinder type, the size of the optical fiber cable, and the number of cable connectors.

HDCU-2000

• Eight SDI outputs, including four 3G-SDI outputs

• Up to twelve additional 3G-SDI/HD-SDI outputs (with three optional

HKCU-2007 boards)

• Four sets of 3G-SDI/HD-SDI/SD-SDI and analog composite return video inputs

• Two-channel teleprompter inputs

• Built-in LAN interface (10BASE-T/100BASE-TX)

• Two-channel data trunk lines (RS-422A or RS-232C) for easy data transmission

• AES/EBU digital audio output

• Two-channel microphone outputs (two XLR connectors)

• High power supply allowing HDC-2000 Series cameras or HDC-2400/HDC-2500 with HDLA-1500/ HDLA-1505/HDLA-1507 operation

HDCU-2000

HDCU-2000 Rear Panel

11


HDCU-2500

• High power supply allowing HDC-2000 Series cameras to operate with the

HDLA-1500/HDLA-1505/HDLA-1507

• Seven SDI outputs, including three 3G-SDI outputs

• Up to four additional 3G-SDI/HD-SDI outputs (with optional HKCU-2007 boards)

• Three 3G-SDI/HD-SDI/SD-SDI or analog composite return video inputs

• One-channel teleprompter input


• Two-channel data trunk line (RS-422A/RS-232C) for easy data transmission

• Two-channel microphone outputs (two XLR connectors)

Interface Expansion Options

Three types of interface expansion option are available for both CCUs: the HKCU-1001, HKCU-1003, and HKCU-2007.

• The HKCU-2007 3G-SDI/HD-SDI Output Expansion Unit provides four 3G-SDI or

HD-SDI outputs

• The HKCU-1003 Multi Interface Unit consists of three types of interface board and provides:

- Two analog NTSC or PAL VBS signal outputs, a PIX output, and a WFM output

(Board A)

- A frame reference input, output to lock 2-3 pull-down sequence, a PIX output, and a WFM output (Board B)

- Analog NTSC or PAL VBS and analog component R/G/B or Y/R-Y/B-Y outputs (Board C)

• The HKCU-1001 SD Analog Interface Unit provides two analog NTSC or PAL VBS signal outputs, a PIX (picture monitor) output, and a WFM (waveform monitor) output

HDCU-2500 Rear Panel

HDCU-2500

HKC-T1500 CCD Block Extension Adaptor

The HKC-T1500 CCD Block Extension Adaptor is a unique accessory for

HDC-2400, HDC-2500, and HDC-2570 portable cameras. It allows the

CCD block to be extended from the camera body by up to 12.5 m (up to

50 m with an optional cable). More creative camera shooting angles can be achieved, along with the freedom to place the imaging assembly in areas where a full-size camera would be restricted. The HKC-T1500 adaptor expands the spectrum of HD camera applications to areas such as snorkel lenses, helicopter gimbal mounts, and mini jibs.

The HKC-T1500 connected to the HDC-2500.

HKCU-2007 3G-SDI/HD-SDI

Output Expansion Unit

HKCU-1003 Multi Interface Unit HKCU-1001 SD Analog

Interface Unit

Upgrade Program For 4K

With the optional HKCU-2040 4K/HDR Processor Board and HZC-PRV20 Signal

Format Software, the HDC-1700 can be upgraded to create 4K resolution images as well as 4K Live HDR (High Dynamic Range) images.

The HKCU-2040 installed in the HDCU-2500.

12

HDC-2000 Series System Configuration with LAN Connection

CAMERA SYSTEM

MANAGEMENT SOFTWARE

HZC-CSM10

INSTALLED

REMOTE CONTROL PANEL

RCP-1000/1500 Series

PC

MASTER SETUP UNIT

MSU-1500

MASTER SETUP UNIT

MSU-1000 Series

POE SWITCHING HUB

CRT B/W VIEWFINDER

HDVF-20A/200

LCD COLOR VIEWFINDER

HDVF-C35W/HDVF-C30WR





CCA-5 CABLE

HKCU-1001

HKCU-1003

HKCU-2007

HD CAMERA CONTROL UNIT

HDCU-2500 or HDCU-2000


HDVF-C550W


HDVF-EL75

CCA-5 CABLE

HKCU-1001

HKCU-1003

HKCU-2007



ENG/EFP LENS

CCD BLOCK ADAPTOR

CABLE

ADAPTOR

PORTABLE LENS CCD BLOCK

HD CCD BLOCK ADAPTOR

HKC-T1500

COLOR VIDEO CAMERA

HDC-2500/HDC-2400


HDVF-L750


HDVF-L770

STUDIO ZOOM LENS COLOR VIDEO CAMERA

HDC-2000

OLED COLOR VIEWFINDER

HDVF-EL70

STUDIO ZOOM LENS

CRT B/W VIEWFINDER

HDVF-700A

STUDIO ZOOM LENS

SCRIPT HOLDER

BKP-7911

ENG/EFP LENS

LARGE LENS ADAPTOR

HDLA-1505

LARGE LENS ADAPTOR

HDLA-1500

LARGE VIEWFINDER ADAPTOR

HDLA-1507


HDVF-EL70

CRT B/W VIEWFINDER

HDVF-700A


HDVF-EL70

CRT B/W VIEWFINDER

HDVF-700A

13

HDC-2000 Series System Configuration with Camera Network Unit Connection

MASTER SETUP UNIT

MSU-1500

MASTER SETUP UNIT

MSU-1000 Series



CCA-5 CABLE

CCA-5 CABLE

CCA-5 CABLE

CCA-5 CABLE

CCA-5 CABLE

CAMERA COMMAND NETWORK UNIT

CNU-700

CRT B/W VIEWFINDER

HDVF-20A/200


HDVF-C35W/HDVF-C30WR

HKCU-1001

HKCU-1003

HKCU-2007




HDVF-C550W


HDVF-EL75


HDVF-L750

HKCU-1001

HKCU-1003

HKCU-2007



ENG/EFP LENS

CCD BLOCK ADAPTOR

CABLE

ADAPTOR

PORTABLE LENS CCD BLOCK

HD CCD BLOCK ADAPTOR

HKC-T1500

STUDIO ZOOM LENS COLOR VIDEO CAMERA

HDC-2000


HDVF-EL70

STUDIO ZOOM LENS

CRT B/W VIEWFINDER

HDVF-700A

STUDIO ZOOM LENS

SCRIPT HOLDER

BKP-7911

ENG/EFP LENS

COLOR VIDEO CAMERA

HDC-2500/HDC-2400

LARGE LENS ADAPTOR

HDLA-1505

LARGE LENS ADAPTOR

HDLA-1500

LARGE VIEWFINDER ADAPTOR

HDLA-1507


HDVF-L770


HDVF-EL70

CRT B/W VIEWFINDER

HDVF-700A


HDVF-EL70

CRT B/W VIEWFINDER

HDVF-700A

14

HDC-2000 Series Control/Intercom Panels and Connectors

HDC-2000

Control Panel

POWER R G B RET 1

1

2 3 4

RET 2

1

2 3 4

RET 3

1

2 3 4

1

2 3 4

5

H-POSI V-POSI STORE

ND

FILTER LOCAL

A

B C D

E

WIDTH HEIGHT

CC

UP TALLY

ON

SCREEN SIZE

MARKER

MARKER

ON

ON

MIX VF

ON

DISPLAY

OFF

ON

OFF OFF OFF OFF

MENU SELECT

MENU

CANCEL ENTER

1

CURSOR

2 3

ASSIGN

COLOR

DETAIL

ON

ZOOM

LINK

ON

FOCUS

ASSIST BAR

ON

EXT

OFF OFF OFF

VF DETAIL

VF ASSIGN

1

CALL

INTERCOM 1

Intercom Panel (for 60 Hz countries)

ENG PROD PTT

MIC

OFF

PGM1

INTERCOM

PGM2

ON ENG PROD

PGM1

PTT

INTERCOM

MIC

OFF

PGM2

ON

INTERCOM 2

Connectors

OUTPUT

SDI 1 SDI 2 SDI MONI TEST OUT

NETWORK

TRUNK

Inside Panel

REMOTE CRANE TRACKER RET

CONTROL

DC

OUT

INTERCOM 1

Intercom Panel (for 50 Hz countries)

ENG

MIC1

OFF PROD

TRACKER

ENG

MIC2

OFF PROD

ENG PROD PGM1 PGM2

INTERCOM 2

Connectors

AUDIO IN 1 AUDIO IN 2

MIC MIC

LINE +48V

OFF

LINE +48V

AES/EBU

OFF

DC IN

Outside Panel

HDLA-1500/HDLA-1505/HDLA-1507

DC OUT Connector

HDC-2400/HDC-2500/HDC-2570

Control/Intercom Panel (for 60 Hz countries)

RET1

1

2 3

4

RET2

1

2 3

4 LIGHT

ON

PGM1 PGM2 PGM1

OFF

PGM2

LEVEL

REAR

MIC

ON

INCOM

PROD

LEVEL

REAR

MIC

ON

INCOM

PROD

FRONT OFF ENG

INTERCOM 1

FRONT OFF

INTERCOM 2

ENG

Control/Intercom Panel (for 50 Hz countries)

ENG PROD PGM1 PGM2

MIC

LINE1 PROD

OFF

ENG

INTERCOM 1

MIC

LINE2 PROD

OFF

TRACKER

LEVEL

REAR

ENG

INTERCOM 2

FRT

DC OUT EARPHONE

TRACKER CRANE

RET CTRL

LINE

DC IN 10.5-17V

FRONT MIC

MIC

+48V

OFF

LINE

AUDIO IN

CH1

AES/EBU

MIC

+48V

OFF

CH2

REMOTE

PROMPTER

/GEN

LOCK

TEST

OUT

SDI

MONI

Control Panel (Left)

POWER

R

RET 1

1

2 3 4

G

RET 2

1

2 3 4

B

RET 3

1

2 3 4

1

CURSOR

2

STORE

3

H-POSI

WIDTH

VF DTL

CALL

ON

V-POSI

HEIGHT

MIX VF

ON

VF SCAN

16:9

OFF

MARKER

ON

ON

4:3

SCREEN SIZE

MARKER

OFF

ON

OFF

OFF

UP TALLY

ON

MENU

OFF

CANCEL ENTER

ASSIGN-

ABLE

1

2 3 4

5 A

B C D

E

ND CC

Control Panel (Right)

DC OUT

12V 1.5A

1

VF DTL

DETAIL

ON

OFF

VF ASSIGN

R

ON

OFF

ON

OFF

15

HDC-4300 Super Motion Camera with 4K Capability

16

Simulated image


Since the launch of the BVP-3000 high-speed capturing camera in 1984, Sony has been continuously developing cameras that provide high-quality slowmotion image shooting, primarily used for sports coverage. There is strong demand for a slow-motion camera system – one that offers even greater performance, as well as 4K/HD compatibility. The HDC-4300 has stunning picture quality with its three superb 2/3-inch 4K imagers, state-of-the-art features, and broad range of functions.

Sony’s cutting-edge technology enables the HDC-4300 to capture 1920 x 1080 high-definition images at an amazing frame rate, eight times* 1 above the normal frame rate (1080/479.52p, 1080/400p, 720/479.52p or 720/400p).

The HDC-4300 has another huge advantage – its 4K capability, achieved by installing optional SZC-4001 software. The HDC-4300 delivers superb 4K images thanks to its three 2/3-inch 4K imagers with Sony’s latest designed optical system, supporting ITU-R BT.2020* 2 and providing a wide color gamut.

The HDC-4300 is released as a high-performance model, and is the first in the

HDC Series to offer both an HD and a 4K capability. With all these attractive features, the Sony HDC-4300 is the optimum solution to deliver true-to-life sports entertainment.

*1 SZC-4002 software option increases standard 3x HD super slow motion to 4x, 6x and 8x HD super slow motion.

*2 ITU-R BT.2020 is the specification of video format defined by ITU-R. The HDC-4300 does not cover it in full.

HDC-4300

Lens and viewfinder are optional.

17


Features

(1) High-frame-rate HD capture for 8x super slow motion

(with optional software, SZC-4002 for BPU-4000)

The HDC-4300’s real 4K imagers capture at four times the resolution of HD. In HD shooting, this can be used to achieve extreme high-speed image capture at a maximum of 479.52/400 fps with the optional software upgrade. Capture rates of 59.94/50, 119.88/100 and 179.82/150 fps are available as standard.The full digital process is applied to each frame even at high-frame rates in the BPU-

4000, producing the same quality in the images as one at the normal speed.

Both the high-speed image and the normal-speed image can be adjusted by individual paint parameters. Captured images can be recorded to the PWS-4400

4K/HD multi-port AV storage unit for super slow motion replay* 1 .

*1 Some third party manufacturer servers may also be used. For 8x slow motion reply, the PWS-4400 system requires software upgrade V1.4.

(2) Superb 4K capability

(with optional software, SZC-4001 for HDC-4300)

The HDC-4300 has the function of capturing 4K images. For the HDC-4300, Sony has brought together its leading-edge technologies and deep experience to design and build the world’s first three 2/3-inch 4K imagers with ultra-precision alignment technology used to mount the chips to a newly developed prism. This new optical system supports the wide color gamut of ITU-R BT.2020* 2 , enabling more precise color reproduction in live broadcasts.

*2 ITU-R BT.2020 is the specification of video format defined by ITU-R. The HDC-4300 does not cover it in full.

(3) Direct installation of B4-mount lenses for

4K/HD shooting

Thanks to the 2/3-inch camera mount, the HDC-4300 works directly with B4 lenses. The B4-mount supports both HD and 4K lenses, allowing you to use

B4-mount high power large lenses to capture sports scenes with the same depth of field as the HDC Series cameras.

18

Features System Configuration Example

(4) 4K/HD multiple operation

The HDC-4300 has inherited flexible configuration capabilities from field-proven HDC Series cameras, and can add the most appropriate functions efficiently. Examples include its 4K capability and high-frame-rate capturing function for 8x slow motion, according to usage or workflow, with the installation of optional software.

In combination with the existing HDC Series camera systems, which are widely accepted in broadcast stations and productions worldwide, you can achieve multi-source operation of 4K and HD without any major modifications.

This provides assurance of a smooth and easy migration from HD to 4K live production.

(5) Advanced 4K live camera system

The 4K live camera system based on the HDC-4300 is built in combination with the BPU-4000 baseband processor unit and the HDCU-2000 or HDCU-2500 camera control unit. This system has particular appeal for sports live broadcasting.

HDC-4300 BPU-4000 HDCU-2000

ENG/EFP Lens

VCT-14

Tripod Adaptor

HDC-4300

Tripod

HDVF-EL70/700A

Viewfinder

B4-mount

Large Lens

HDLA-1500 Series

Large Lens Adaptor

Tripod

HDVF-550/C730W/

C550W/EL75

Viewfinder

HDVF-20A/200/

C30WR/C35W

Viewfinder

Optical fiber cable

USB flash drive

BVM-X300

4K Video Monitor

BNC x 4

BPU-4000

BNC


Optical fiber cable

CAC-6 Return Video Selector

Intercom Headset

CAC-12 Camera

Microphone Holder

Microphone

*

HD Video Monitor

2x, 3x slow-motion video

Normal speed video

HDC-4300

Optical fiber cable

CAC-6 Return Video Selector

Intercom Headset

Microphone

BKP-7911 Script Holder

Sync signal input

Return video input

Intercom/

Microphone input

* CCA-5

HDCU-2000

Camera Control Unit

RCP-1000 Series

Remote Control

Panel

LAN cable

Video

Monitor

Waveform

Monitor

Sync signal input

Return video input

Intercom/

Microphone input

Video Router

*

Hub

HDCU-2500

Camera Control

Unit

CCA-5

RCP-1000 Series

Remote Control

Panel

LAN cable

HDC-4300

HDCE-100

Camera Extension

Adaptor

HKCU-SM100

CCU Extension

Adaptor

BPU-4000, BPU-4500 or

HDCU-4300

Single Mode Fiber Transmission Solution

MSU-1000 Series

Master Setup Unit

* Maximum transmission distance from HDCU to HDC-4300

2000 m for HDCU-2000 (max.)

1000 m for HDCU-2500 (max.)

19

HDC-P1 HD Multi-purpose Camera

The HDC-P1 is a highly compact Point-of-View (POV)-style HD multi-purpose camera based on sophisticated core technologies established through a long-time development of Sony’s flagship

HDC Series system cameras.

Sony offers the HDC-P1 as a small box-type POV camera with shooting flexibility from almost anywhere, and also high-quality full-HD pictures as a standalone camera or a system camera that enables seamless integration with pictures from full-size cameras.

The HDC-P1 also enhances the creative flexibility of live production. You can use it as a robotic camera in a studio automation system or compact 3D camera installed in a 3D camera system.

20

HDC-P1 HD Multi-purpose Camera

Features

Compact design with high picture quality

Packed in a highly slim and compact body of only about 86 mm (3 1/2 inches) wide and weighing around 1.7 kg (3 lb 12 oz, excluding a lens), the HDC-P1 is equipped with three superb 2/3-inch progressive CCDs and Sony-developed digital processing LSI to bring out high picture quality equivalent to that of reputable HDC Series cameras.

The HDC-P1 is ideal for use in space-limited areas such as camera crane jibs, helicopter camera mounts, and stereoscopic 3D camera rigs.

Dual optical servo filters

The HDC-P1 is equipped with Neutral Density (ND) and Color Correction (CC) optical servo filter units, which can be remotely controlled according to lighting condition changes from a remote control panel (RCP) or a master setup unit

(MSU).

Master setup unit and remote control panel

You can use the MSU-1000/MSU-1500 Master Setup Unit (MSU) and RCP-1000

Series Remote Control Panel (RCP) developed for Sony’s flagship HDC Series system cameras to adjust HDC-P1 camera parameters.

Multi-format operation

A wide range of capturing formats are supported, such as 1080/59.94i, 1080/50i,

1080/59.94p* 1 , 1080/50p* 1 , 720/59.94p, 720/50p, 1080/23.98PsF* 2 , 24PsF* 2 ,

25PsF* 2 , and 29.97PsF* 2 .

*1 Optional HZC-PRVP1 software is required.

*2 Optional HZC-PSFP1 software is required.

System Example

System Configuration (CNU Connection)

HDC-2000 Series

Camera Control Unit

HDCU-2000/2500

Camera Command Network Unit

CNU-700

HDC-2000 Series Camera Control Unit

HDCU-2000/2500

CCA-5 Cable

System Configuration (LAN connection)

HDC-2000 Series

Camera Control Unit

HDCU-2000/2500

Camera Command Network Unit

CNU-700

POE SWITCHING HUB

HDC-2000 Series Camera Control Unit

HDCU-2000/2500



Lens HDC-P1

Video Output

HD-SDI/SD-SDI/VBS

Memory Stick Duo

MSU-1000 Series

Lens HDC-P1

Video Output

HD-SDI/SD-SDI/VBS

Memory Stick Duo

MSU-1000 Series

Dimensions

86 (3 1/2) 212 (8 3/8)

Unit: mm (inches)

21

Versatile System Components

HDFA-200 HD Optical Fiber Adaptor Unit

The HDFA-200 is an optical fiber adaptor which employs sophisticated high bit-rate transmission technologies to realize stereoscopic 3D camera operation.

You can configure an unprecedentedly high-performance, highly compact 3D camera rig using the HDFA-200 combined with the

POV-style HDC-P1 HD Multi-purpose Camera.

Alternatively, a simple system can be configured using the HDFA-200 with a single optical fiber cable.

The HDFA-200 can also transmit RGB 4:4:4 signals using an F35 Digital Cinematography Camera with a 35-mm-sized CCD sensor and PL lens mount.

With its sophisticated performance and functionality, the HDFA-200 is ideal for a broad range of applications such as 3D live production and TV program production with digital cinematography cameras.

Features

Optical fiber transmission

By employing high bit-rate digital optical fiber transmission technologies, signals can be transmitted from two cameras to a camera control unit (CCU) with a single optical fiber cable. Power* 1 and genlock signals can also be supplied to the two cameras.

*1 Up to DC 13 A (14 V) power can be supplied. It depends on connected devices or the cable length.

Stereoscopic 3D multi-camera operation

The HDFA-200 provides a data transmission capability that includes two-channel audio input, intercom, and trunk data (a general-purpose control signal via a CCU and the HDFA-200). The adapter unit lets you carry out 3D multi-camera system operation as simply as with a conventional camera system.

Beneficial single remote panel operation

Flexible 3D system camera operation is assured. You can control left-eye and right-eye cameras simultaneously or separately for individual adjustment.

Viewfinder output with multiple diagnostic/monitoring modes

The HDFA-200 has a viewfinder output, which offers several ways to display the output from the two connected cameras. You can choose from Split, Mix, and

Difference modes, as well as a variety of other options designed to ease the process of rigging 3D camera pairs.

3D monitoring with a viewfinder

The viewfinder (VF) connector on the HDFA-200 can output just right-eye, lefteye, or both right- and left-eye signals. In both right- and left-eye signals mode, you can select split-, mix-, or Y difference-mode for adjustment of the 3D rig.

22

Features

Lens metadata linkage with MPE-200

The focal length of the lens, zoom position, and iris data are overlaid on an

HD-SDI signal output from the CCU as metadata when using a lens supporting serial data transmission. This enables powerful operation for a 3D live production combined with the HDFA-200.

Remote operation of a 3D rig using a trunk data line

General-purpose control signals of up to 150 kbaud can be transmitted as trunk data. This enables RS232C or RS422 signals to be transmitted between a CCU and the HDFA-200, such as operation signals for a 3D rig.

H/V inverting function

The HDFA-200 is equipped with a function that compensates for picture inversion caused by a half-mirror rig such as replacement between right- and left-eye pictures, mirror reversed-picture of horizontal, vertical, or both horizontal and vertical direction. In addition, the amount of signal delay caused by picture inversion is automatically controlled.

System Example

Two cameras with a CCU

When connecting HDC-P1 cameras

HDC-P1 (Right camera)

HDFA-200

HDVF-C730W/C550W/EL75

Viewfinder

Monitor

CAM-SUB (R)

SDI1 OUT SDI2 OUT TEST OUT

DC IN AUDIO IN 1 AUDIO IN 2

MIC MIC

LINE +48V

OFF

LINE +48V

AES/EBU OFF

CAM-MAIN (L)

VF

CAM-MAIN(L)

REMOTE

CAM-SUB(R)

REMOTE

REMOTE VF

AUX CRANE TRACKER RET CTRL DC OUT

0.5A max

INTERCOM

SDI2 OUT

Optical fiber cable

HDCU-2000/2500

Camera Control Unit

Simple system integration with the HDC-P1

By adopting a universal synch cord adaptor, a CCA5 interface control cable is unnecessary for connecting the HDC-P1 HD multi-purpose camera. This makes the system easy to build.

Lightweight and compact

The HDFA-200 is designed to be very compact and lightweight for superior mobility in the field. It weighs approximately 3.8 kg (8 lb 6 oz). It’s easily mounted to a 3D rig, a tripod adaptor, or a universal clamp due to its many general-purpose mounting screw holes.

Optical fiber transmission

Offering a high bit-rate digital optical fiber transmission capability, the HDFA-200 can transmit two cameras’ signals to a connected camera control unit, and supply power and genlock signals to the cameras as well with a single optical fiber.

Dimensions

396 (15 5/8)

348 (13 3/4)

CAM-MAIN(L)

REF OUT SDI IN

CAM-SUB(R)

REF OUT SDI IN

SDI1 OUT SDI2 OUT TEST OUT PROMPTER1/

GENLOCK IN

AUDIO IN 1

MIC

AUDIO IN 2

MIC

LINE +48V

OFF

LINE

AES/EBU

+48V

OFF

DC IN

REMOTE VF

AUX CRANE TRACKER RET CTRL DC OUT

0.5A max

210 (8 3/8)

INTERCOM

PGM1 RET1 RET 2 3 4

PRO Duo

CAMERA POWER

CCU OFF EXT

CALL

MIC

ON

OFF

PTT

PROD

ENG

PGM2

L BOTH

INTERCOM

ON

DISPLAY

OFF

MENU

R

VF SOURCE

MIX SPLIT DIFF CAM HD PROMPTER

ASSIGNABLE

Unit: mm (inches)

HDC-P1 (Left camera)

Intercom headset


Remote Control Panel

23


MSU-1000/MSU-1500 Master Setup Unit

The MSU-1000/MSU-1500 Master Setup Unit is a central control panel used for the adjustment of camera parameters in a multi-camera system. The MSU-1000/

MSU-1500 unit is connected to each camera control unit in the system via the

CNU-700 Command Network Unit or a switching hub.

• Central control of camera parameters for the entire camera system

• Picture and waveform monitor switching

• Precise picture adjustment

• Built-in 6.5-inch* 1 LCD display for clear viewing of adjustment parameters during operation

• Memory stick slot for storing/recalling files


*1 Viewable area measured diagonally.

RCP-1000/1500 Series Remote Control Panel

Five types of remote control panel are available: the RCP-1000, RCP-1001,

RCP-1500, RCP-1501, and RCP-1530. A wide range of camera parameters can be controlled. The RCP-1500, RCP-1501, and RCP-1530 are equipped with various functions for fundamental camera operations, and offer a network interface capability, while the RCP-1000 and RCP-1001 are simple remote control panels that provide specific basic functions.

RCP-1000 RCP-1001 RCP-1500 RCP-1501 RCP-1530

MSU-1000

MSU-1500

24


CNU-700 Camera Command Network Unit

The CNU-700 allows communication between all the units in the system, and provides the ability to assign CCUs, MSUs, RCPs, and HDC-2000 Series camera heads. A RISC-based microprocessor system provides high-speed transfer of command signals to the HDCU-2000 and HDCU-2500 Camera Control Unit for rapid response and reliable control.

One CNU-700 unit can control six cameras, and can be expanded to control up to

12 cameras when fitted with an optional BKP-7930 Expansion Board. Several

CNU-700 units can be connected to the camera control network in a large system. The CNU-700 supports RCP assignment and an S-BUS interface* 1 .

*1 An optional BKP-7933 S-BUS Interface Board is required.

HZC-CSM10 Camera System Management Software

The HZC-CSM10 is a Microsoft Windows-based Master Setup Unit (MSU) software application for controlling the camera system from a PC. It has similar features to a hardware-based MSU, offering camera control, optical level display, file management, remote control panel (RCP) assignment, and diagnosis. The

HZC-CSM10 GUI controls any parameters of the system camera and enables visual setting lists. It acts as a software client to a master hardware MSU.

System requirements

Operating system: Windows 7 (with Service Pack 1 installed), Windows 8

Professional: 32-/64-bit, Ultimate: 32-/64-bit

(The software cannot be installed on Windows Vista and

CPU:

Memory:

Hard disk:

Windows XP.)

1 GHz or faster 32-bit (x86) or 64-bit (x64) processor

2 GB or more

50 MB or more of free space

HZC-CSM10 Camera System Management Software

Camera Head

CCU

MCS Mode: Client

CNA-1

CNU-700

Camera Head

CCU

MCS Mode: Client Network Hub

HZC-CSM10

Software

Camera Head

CCU

MCS Mode: Client

PC

RCP-1000/1500

Series

: LAN Cable

25


CNA-1 Camera Control Network Adaptor

Using the CNA-1, third-party systems integrators and vendors can integrate a system much more easily. With its protocol-converting capability between Sony’s protocol and the IP protocol, the CNA-1 enables Sony’s system cameras to work with other manufacturers’ products. An additional camera chain can be extended via the CNA-1. In addition, the CNA-1 can also be utilized as a “master” module with the HZC-CSM10 PC-based Master Control Unit (MSU) software without requiring a hardware MSU. You can make settings and control Sony’s video cameras for studio or OB vehicle from a Windows PC. As well as operating each camera, other functions are enabled such as browsing the status of connected cameras, managing files, and more.

System Example

Camera Head

HDCU-2000/2500

MCS Mode: Client

Camera Head HDCU-2000/2500

MCS Mode: Client

Camera Head

HDCU-2000/2500

MCS Mode: Client

Network Hub

MSU-1000/1500

MCS Mode: Master

CNA-1

Expansion

Control Panel

: LAN Cable

Dimensions

CNA-1

Even when some delays occur, due to the long-distance transmission infrastructure, communication is assured using two CNA-1 with its simple protocol.

When controlling a camera with an RCP on a one-to-one basis.

CNA-1 (A)

CNS Mode: Legacy

Emulation Mode: RCP

CNA-1 (B)

CNS Mode: Bridge

Emulation Mode: CAM

Network

CCU

CNS Mode:

Legacy Network Hub

(A)

Network Hub

(B)

Camera Head

Network A Network B

RCP

CNS Mode:

Bridge

: LAN Cable

: CCA-5 Cable

26

100 (4)

Unit: mm (inches)

You can select the following camera operating software to be installed to the

CNA-1 according to your needs.

HZC-BRCN1

Controlling the BRC-H900 HD Color Video Camera remotely from the RCP or MSU by converting their protocols to the VISCA protocol for the BRC-H900 over IP.

BRC-H900

CNA-1

PoE Compatible Network Hub

RCP

HDVF-EL70/75 OLED

(Organic Light Emitting Diode) Viewfinder

The HDVF-EL70/75 is a sophisticated color viewfinder which uses a Sonydeveloped OLED (Organic Light Emitting Diode) display. This provides an unprecedented level of image performance such as high-resolution, highcontrast, and faithful color reproduction – especially for black. The OLED display also provides a wide color gamut, short response time, and wide viewing angle, which helps users to easily adjust the focus. Thanks to the OLED display’s thin size, the HDVF-EL70/75 viewfinder is designed to be very compact, allowing for highly flexible viewing positions – from high to low and front to back.

Flexible Viewing Positions

RM-IP10

: LAN Cable

HZC-MSCN1

Controlling multiple cameras from one CNA-1 by expanding the gateway function of the CNA-1.

Camera Head

CCU

MCS Mode: Client Expanded Panel Device

Camera Head

Camera Head

CCU

MCS Mode: Client

CCU

MCS Mode: Client

Network Hub CNA-1

MSU

MCS Mode: Master

HDVF-EL20/30 OLED Viewfinder

The HDVF-EL20/30 is a highly compact viewfinder that is equipped with a 0.7-inch full HD OLED display for brilliant picture response characteristics, a high contrast ratio, and rich color reproduction. This viewfinder consists of seven lenses in four groups including an aspherical lens to reduce image shake and distortion as well as to provide wide eyesight adjustment. Professional users will appreciate the newly developed High Eyepoint function. This allows you to take your eye away from the eyecup to use your peripheral vision – for example, when walking through a crowded room, or trying to follow the trajectory of a flying ball – but you can still see the effective picture area with a slight display reduction. In addition, the HDVF-EL30 is equipped with a 3.5-inch LCD monitor as standard, which is beneficial for shooting with a tripod.

: LAN Cable

HZC-RACN1

Changing the assignment of RCP from the control system. Each operator can set the assignment of the camera from the CNA-1 without changing command cable connections.

HDVF-EL20 HDVF-EL30

27


HDLA-1500/HDLA-1505/HDLA-1507 – Maximizing Operability

To meet the demand for operations that combine a portable camera with a large lens, Sony has developed highly sophisticated HDLA-1500 and

HDLA-1505 Large Lens Adaptors to maximize the operability of HDC-2400, HDC-2500, and HDC-2570 cameras.

Generally, setting up a portable camera to a large lens adaptor is a difficult task, especially fine-tuning the mechanical adjustments between each device. However, with the HDLA-1500 or HDLA-1505 Large Lens Adaptor, time-consuming adjustments and wiring are completely eliminated. Another convenient peripheral for the portable cameras, the HDLA-1507 Large Viewfinder Adaptor, is also available, enabling a large viewfinder to be used. And an upgraded control panel on the rear side of each adaptor provides improved operability.

Unique Interlocking Mechanism for

Simple Operation

HDLA-1500, HDLA-1505, and HDLA-1507 adaptors do not require any cable wiring. Utilizing an unprecedented interlocking mechanism, this solution passes the power, video, and control signals on directly from the portable camera to the HDLA Series adaptor. This unique mechanism also allows the portable camera to be attached and detached without removing large lenses. Furthermore, a lens can be removed even when the camera is mounted on the HDLA-1500 or HDLA-1505 adaptor. The interlocking mechanism therefore allows for astonishingly quick and smooth setup.

Low-profile Design

The low-profile design significantly improves your view, while also minimizing the parallax between the optical axis of the camera head and viewfinder.

28

Docking

1

Open the rear cover of the HDLA Series adaptor.

There is no need to detach the viewfinder.

Docking

2

Mount the portable camera and slide forward until you hear the locking click.

Docking

3

Close the rear cover.

Optional Accessories

MSU-1000

Master Setup Unit

MSU-1500

Master Setup Unit

HDLA-1500

Large Lens Adaptor

(for attachment of the

HDVF-EL70/700A)

HDLA-1505

Large Lens Adaptor

(for attachment of the HDVF-EL75/

C730W/550/C550W)

HDLA-1507

Large Viewfinder Adaptor

(for attachment of the

HDVF-EL70/700A)

RM-B170

Remote Control Unit

RCP-1000


RCP-1001


RCP-1500


RCP-1501


RCP-1530


HDVF-20A

2.0-inch* 1 CRT B/W Viewfinder

HDVF-200

2.0-inch* 1 CRT B/W Viewfinder

HDVF-EL30

3.0-inch* 1 OLED Viewfinder

HDVF-EL20

2.0-inch* 1 OLED Viewfinder

HDVF-EL70

7.4-inch* 1 Color HD Viewfinder

HDVF-EL75

7.4-inch* 1 Color HD Viewfinder

VFH-790

Outdoor Hood for

HDVF-EL70/EL75

HDVF-L750

7-inch* 1 LCD Color Viewfinder

*1 Viewable area measured diagonally

HDVF-L770

7-inch* 1 LCD Color Viewfinder

HDCE-100

Camera Extension Adaptor

HKCU-SM100

CCU Extension Adaptor

HKCU-2040

4K/HDR Processor Board

29

Optional Accessories

BKW-401

Viewfinder Rotation Bracket

BKP-7911

Script Holder

CAC-6

Return Video Selector

CAC-12

Mic Holder

VCT-14

Tripod Adaptor

HKC-DF20

Dual-filter Unit for HDC-2400

HKC-T1500

HD CCD Block Adaptor

HKC-T3300


HKCU-1001

SD Analog Interface Unit

(for HDCU-2000/HDCU-2500)

HKCU-1003

Multi Interface Unit


HKCU-1005

HD-SDI/SD-SDI Expansion Unit

(for HDCU-3300R)

HKCU-2007

3G-SDI/HD-SDI Expansion Unit


HKC-FB20

Optical Fiber Transmission

Adaptor

HKC-TR27

Digital Triax Transmission

Adaptor

HKC-WL20

Wireless Module Adaptor

HKC-CN20

Side Panel Attachment Kit

HDCU-2000

Full-rack-size

Camera Control Unit

HDCU-2500

Half-rack-size

Camera Control Unit

HDFX-200

Digital Triax CCU Adaptor

HDTX-200

Digital Triax Camera Adaptor

HDCE-200

Camera Extension Adaptor

HKC-SM27

Single Mode Fiber Kit

30

BPU-4000


HDCU-4300

Camera Control Unit

(for HDC-4300 Camera)

Combination List

Model name Product name HDC-2000 HDC-2500

Master

Setup Unit

Large Lens

Adaptor

Remote

Cntrol

Panel

MSU-1000

MSU-1500

HDLA-1500

HDLA-1505

HDLA-1507

RM-B170

RCP-1000

RCP-1001

Master Setup Unit

Master Setup Unit

Large Lens Adaptor

Large Lens Adaptor

Large Viewfinder Adaptor

Remote Control Unit



View finder

& Outdoor

Hood

RCP-1500

RCP-1501

RCP-1530

HDVF-20A

HDVF-200




2.0-inch CRT B/W Viewfinder

2.0-inch CRT B/W Viewfinder

HDVF-C35W 3.5-inch LCD Color Viewfinder

Software

HDVF-C30WR 2.7-inch LCD Color Viewfinder

HDVF-EL70* 1 7.4-inch Color HD Viewfinder

HDVF-EL75* 1 7.4-inch Color HD Viewfinder

HDVF-700A* 2 7.0-inch CRT B/W Viewfinder

HDVF-C730W*

HDVF-550*

HDCU-2500

HDFX-200

HDTX-200

HKC-T1500

HKC-T3300

HKC-DF20

HKC-FB20*

HKC-TR27*

HZC-UG444

HZC-PRVP1

HZC-PSFP1

6

3

6

2 6.3-inch LCD Color Viewfinder

5.0-inch CRT B/W

HDVF-C550W* 4 5-inch LCD Color Viewfinder

Accessory HDCU-2000 HD Camera Control Unit


Digital Triax CCU Adaptor

Digital Triax Camera Adaptor



ND/CC Dual Optical Filter Unit

Optical Fiber Transmission Adaptor

Digital Triax Transmission Adaptor

HKC-WL20* 6 Wireless Module Adaptor

HKC-CN20 Side Panel Attachment Kit

BKW-401

BKP-7911

Viewfinder Rotation Bracket

Script Holder

CAC-6

CAC-12

VCT-14

HZC-PSF20

HZC-PRV20

HZC-DFR20

Return Video Selector

Mic Holder

Tripod Adaptor

Support software for PsF format

–

–

–

YES

YES

–

YES

–

–

Standard

–

–

–

–

–

YES

YES

–

–

Standard

50p/59.94p Software

Double-speed capturing software for slow motion

Standard

Standard

User Gamma-compatible software Standard

Support software for progressive format

Support software for PsF format

–

–

YES

YES

YES

–

–

–

–

YES

–

YES

YES

YES

–

–

–

YES

YES

YES

Standard

Standard

–

–

–

Standard

Standard

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

–

YES

YES

YES

YES

YES

Standard

Standard

YES

YES

YES

YES

YES

YES

YES

–

YES

–

YES

YES

YES

YES

YES

YES

YES

YES

HDC-2570

YES

YES

YES

YES* 5

YES* 5

YES

–

YES

–

Standard

YES

Standard

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

–

YES

–

YES

YES

YES

YES

YES

YES

YES

YES

YES

–

–

HDC-2400

–

YES

Standard

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

–

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

–

YES

–

YES

YES

YES

YES

YES

YES

YES

YES

YES

–

–

HDC-4300

–

–

YES

YES

–

–

–

–

YES

YES

YES

–

–

–

–

–

–

YES

YES

YES

–

YES

YES

YES

YES

YES

YES

YES

–

YES

–

YES

YES

YES

YES

YES

YES

YES

YES

–

–

–

–

HDC-P1

–

–

–

–

–

–

–

–

–

–

YES

–

–

–

–

–

–

–

–

–

–

–

–

–

–

YES

YES

YES

–

–

–

YES

YES

–

–

–

YES

YES

YES

–

–

YES

YES

Model name Product name

HKCU-1001 SD Analog Interface Unit

HKCU-1003 Multi Interface Unit

HKCU-2007 3G-SDI/HD-SDI Expansion Unit

HKCU-1005 HD-SDI/SD-SDI Expansion Unit

HKCU-2040 4K/HDR Processor Board

HDCU-2000 HDCU-2500

YES

YES

YES

–

YES

YES

YES

YES

–

YES

*1 Outdoor Hood: VFH-790 (for HDVF-EL70/EL75), It can attach to HDLA-1500, 1507.

*2 Outdoor Hood: VFH-770 (for HDVF-730W/700A)

*3 Outdoor Hood: VFH-550 (for HDVF-550)

*4 Outdoor Hood: VFH-570 (for HDVF-C550W)

*5 An optional HDFX-200 is required.

*6 HKC-CN20 is necessary for connection.

31

Specifications

HDC-2000/HDC-2500/HDC-2400/HDC-2570 Specifications

HDC-2000 HDC-2500 HDC-2400

General

Power requirements

Operating temperature

Storage temperature

Mass

Camera

Pickup device

Effective picture elements (H x V)

Signal format

Spectrum system

Lens mount

Built-in filters

AC 240 V, 1.7 A (max.), DC 180 V, 0.9 A (max.),

DC 12 V, 10 A (max.)

-20 °C to +45 °C (-4 °F to +113 °F)

-20 °C to +60 °C (-4 °F to +140 °F)

21 kg (46 lb 4.8 oz)

3-chip 2/3-inch type CCD

1920 x 1080

1080/50i, 59.94i, 23.98p, 24p, 25p, 29.97p

1080/50p, 59.94p, 720/50p, 59.94p

1080/100i, 119.88i, 720/100p,119.88p

F1.4 prism

Sony hanger mount

CC A: CROSS, B: 3200K, C: 4300K, D: 6300K, E: 8000K

AC 240 V, 1.4 A (max.), DC 180 V, 1.0 A (max.),

DC 12 V, 7 A (max.)

4.5 kg (9 lb 15 oz)

Sony bayonet mount

AC 240 V, 1.4 A (max.), DC 180 V, 1.0 A (max.),

DC 12 V, 7 A (max.)

1080/50i, 59.94i

720/50p, 59.94p

ND 1: CLEAR, 2: 1/4ND, 3: 1/8ND, 4: 1/16ND, 5: 1/64ND

Sensitivity (at 2000 lx, 3200K, 89.9% reflectance) F11 (at 1080/50i), F10 (at 1080/59.94i)

Signal-to-noise ratio (1080i, typical)

Horizontal resolution (1080i)

Shutter speed selection

-60 dB/-64 dB (with NS max.)

1,000 TV lines (at center)

Modulation depth (1080i, typical)

Input/output connectors

1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (50i)

1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (59.94i)

1/32, 1/48, 1/96, 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (23.98p/24p)

1/33, 1/50, 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (25p)

1/40, 1/60, 1/100, 1/120, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (29.97p)

1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (50p)

1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (59.94p)

Y: 50% at 27.5 MHz (800 TV lines with typical lens), Pb/Pr: 80% at 12 MHz

Audio input (CH1)

Audio input (CH2)

Mic 1 input

Return control input

XLR-3-pin (female) (x1), mic or line selectable

XLR-3-pin (female) (x1), AES/EBU, mic, or line selectable

–

6-pin (x1)

XLR-3-pin (female) (x1)

BNC (x1), 1.0 Vp-p, 75 Ω

–

Prompter output/Genlock input/Return input

Prompter 1

Prompter 2

DC input

DC output

Test output

SDI 1 output (with embedded audio)

SDI 2 output

–

BNC (x1), 1.0 Vp-p, 75 Ω

BNC (x1), 1.0 Vp-p, 75 Ω

XLR-4-pin (x1), DC 10.5 V to 17 V

4-pin (x1), DC 10.5 V to 17 V, 1.5 A (max.)

BNC (x1), 1.0 Vp-p, 75 Ω

BNC (x1), 3G-SDI, HD-SDI

BNC (x1), HD-SDI

Electrical

(CC optical filters are available with optional HKC-DF20)

1: CLEAR, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND, 5: CROSS

1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (50i)

1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (59.94i)

1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (50p)

1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (59.94p)

4-pin (x1), DC 10.5 V to 17 V, 0.5 A (max.), 2-pin (x1), DC 10.5 V to 17 V, 2.5 A (max.)

SDI-MONI

Earphone output

CCU

HDFX

Tracker

Crane

Intercom 1

Intercom 2

Remote

Network trunk

Lens

Viewfinder

Supplied accessories

BNC (x1), HD-SDI or SD-SDI selectable

–

Electro-optical connector (LEMO 3K.93C connector) (x1)

–

10-pin (x1)

12-pin (x1)



8-pin (x1)

RJ-45 (x1)

36-pin (x1)

D-sub 25-pin (x1)

Stereo mini jack (x1)

12-pin (x1)

20-pin (x1)

Operation manual (1), Angle adjustment brackets (2),

Front cover (1), Number plates for side panel (2 sets),

Number plates for up-tally lamp (1 set), Cable clamp (2)

Operation manual (1), Cable clamp belt (1 set), Camera number label (1), Screws (+B3x8) (2)

* 1080/59.94p and 1080/50p signals can be output only from the HDC-2000/HDC-2500 camera head in a stand-alone configuration.

HDC-2570

DC 180 V, 1.1 A (max.), DC 12 V, 8.5 A (max.)

5.1 kg (11 lb 3.9 oz)

A: CROSS, B: 3200K, C: 4300K, D: 6300K, E: 8000K

1: CLEAR, 2: 1/4ND, 3: 1/8ND, 4: 1/16ND, 5: 1/64ND

–

–

–

Triax connector (x1)

32

Specifications

HDCU-2000/HDCU-2500 Specifications

General

Power supply


Storage temperature

Mass

Input/output connectors

Camera

Intercom/Tally/PGM

RCP/CNU

Trunk A

Trunk line

LAN

Network trunk

I/O port

Input connectors

Return input

Reference input

Prompter input

Mic remote

HD prompter input

Output connectors

Audio output (CH1, CH2)

AES/EBU

Character output

Character/Sync output

Sync output

WF remote

3G-SDI/HD-SDI output

HD-SDI/SD-SDI output

HD trunk output

HDCU-2000 HDCU-2500

AC 100 V, AC 120 V, or AC 220 to 240 V, 50/60 Hz

5 °C to 40 °C (41 °F to 104 °F)

-20 °C to +60 °C (-4 °F to +140 °F)

17.5 kg (38 lb 9.3 oz)

AC 100 V to 240 V, 50/60 Hz

-10 °C to +40 °C (+14 °F to +104 °F)

6.7 kg (14 lb 12 oz)

Optical fiber connector (LEMO 3K.93C connector) (x1), AC 240 V power supply Optical fiber connector (LEMO 3K.93C connector) (x1), AC 180 V power supply

D-sub 25-pin (x1)

Intercom (PROD/ENG): 4W/RTS/CC, 0 dB, Tally (R, G, Y), PGM: 2 systems, 0/-20 dB

8-pin (x1)

12-pin (x1)

D-sub 9-pin (female) (x1), RS-232C

RJ-45 (x1), 10 BASE-T, 100 BASE-TX

RJ-45 (x1)

D-sub 15-pin (female) (x1)

–

–

[SDI RET IN]

BNC (x4)

3G-SDI: SMPTE 424M/425M Level-B, 2.970 Gbps/2.967 Gbps

HD-SDI: SMPTE 292M, 1.485 Gbps/1.4835Gbps

SD-SDI: SMPTE 259M, 270 Mbps

[VBS RET IN]

BNC (x4) analog signal, 1.0 V p-p, 75 Ω

BNC (x2), loop-through output

HD: SMPTE-274M, tri-level sync, 0.6 Vp-p, 75 Ω

SD: Black burst (NTSC: 0.286 Vp-p, 75 Ω/PAL: 0.3 Vp-p, 75 Ω) or NTSC 10F-BB

BNC (x4), loop-through output (2-ch), analog signal, 1.0 Vp-p, 75 Ω

D-sub 15-pin (x1)

BNC (x1)

SMPTE 292M, 75 Ω, 1.485 Gbps/1.4835 Gbps

BNC (x3)

VBS: 1.0 Vp-p, 75 Ω

3G-SDI: SMPTE 424M/425M Level-B, 2.970 Gbps/2.967 Gbps

HD-SDI: SMPTE 292M, 1.485 Gbps/1.4835 Gbps

SD-SDI: SMPTE 259M, 270 Mbps

BNC (x2), loop-through output (2-ch), analog signal, 1.0 Vp-p, 75 Ω

XLR-3-pin (male) (x2), 0 dBu/-20 dBu/+4 dBu

BNC (x1)

BNC (x1), VBS, 1.0 Vp-p, 75 Ω, character ON/OFF selectable

–

–

–

BNC (x1), HD sync/SD sync/Character selectable

HD sync: BTA S001A, tri-level sync, 0.6 Vp-p, 75 Ω

SD sync: composite sync, 0.3 Vp-p, 75 Ω

Character: VBS, 1.0 Vp-p, 75 Ω, character ON/OFF selectable

– BNC (x1), HD sync/SD sync selectable

HD: BTA S001A, tri-level sync, 0.6 Vp-p, 75 Ω

SD: composite sync, 0.3 Vp-p, 75 Ω


BNC (x2)

3G-SDI: SMPTE 424M/425M Level-B,0.8 Vp-p, 75 Ω, 2.970 Gbps/2.967Gbps

HD-SDI: SMPTE 292M, 0.8 Vp-p, 75 Ω, 1.485 Gbps/1.4835 Gbps

BNC (x2)



3G-SDI/HD-SDI and character ON/OFF selectable

BNC (x2)


SD-SDI: SMPTE 259M, 0.8 Vp-p, 75 Ω, 270 Mbps

BNC (x2)



HD-SDI/SD-SDI and character ON/OFF selectable

–

BNC (x2)



BNC (x1)



3G-SDI/HD-SDI and character ON/OFF selectable

BNC (x2)



BNC (x2)



HD-SDI/SD-SDI and character ON/OFF selectable

BNC (x1)

BTA: SMPTE 292M, 0.8 Vp-p, 75 Ω, 1.485 Gbps/1.4835 Gbps (Available only when camera single link format is selected.)

Optional Input/Output Boards

HKCU-1001 SD Analog Interface Unit

VBS output BNC (x2)

Analog composite monitor output

BNC: WF (x1), PIX (x1)

HKCU-1003 Multi Interface Unit

VDA-A board: VBS I/F

VBS output


VDA-B board: Frame rate I/F

Frame reference input/output


VDA-C board: Sub I/F

VBS output

BNC (x2)


BNC (x1, loop-through), full pull-down sequence lock


BNC (x1)

Analog component output BNC (x3), R/G/B or Y/R-Y/B-Y selectable

HKCU-2007 3G/HD SDI Output Expansion Unit

3G-SDI/HD-SDI output BNC (x2)

3G-SDI: SMPTE 424M/425M Level-B standard, 0.8 Vp-p, 75 Ω,

2.970 Gbps/2.967 Gbps


3G-SDI/HD-SDI selectable

BNC (x2)

3G-SDI: SMPTE 424M/425M Level-B standard, 0.8 Vp-p, 75 Ω,

2.970 Gbps/2.967 Gbps


3G-SDI/HD-SDI selectable

Character ON/OFF selectable (connectors 3/4)

HKC-T1500

General

Power requirements for camera input


Operating humidity

Mass

CCD block adaptor I/F

Camera cable

Mic input

Lens

Viewfinder

Intercom

Cable adaptor I/F

Camera cable

Mic output

Viewfinder

Intercom

DC 13.5 V to DC 17.0 V

-20 ˚C to +45 ˚C (-4 ˚F to +113 ˚F)

10% to 90% (no condensation)

Cable adapter: approx. 0.5 kg (1 lb 1.6 oz)

CCD block adapter: approx. 1.9 kg (4 lb 3 oz)

(with CCD block)

55-pin multicore cable connector (male) (x1)


12-pin (x1)

20-pin (x1)


55-pin multicore cable connector (female) (x1)

XLR-3-pin (male) (x1)

20-pin (x1)

XLR-5-pin (male) (x1)

33

Specifications

HDC-4300/BPU-4000/HDCU-4300 Specifications

HDC-4300

General

Power requirements


Storage temperature

Mass

Camera section

Pickup device

Spectrum system

Built-in filters

Sensitivity

Signal-to-noise ratio

Horizontal resolution


BPU

Audio input (CH1, CH2)

AC 240 V, 1.4 A (max.), DC 180 V, 1.0 A (max.), DC 12 V, 7 A (max.)

-20°C to +45°C (-4°F to +113°F)

-20°C to +60°C (-4°F to +140°F)

Approx. 5.0 kg (11 lb 0.37 oz) (unit onlly)

3-chip 2/3-inch type CMOS

F1.4 prism

ND: 1: CLEAR, 2: 1/4ND, 3: 1/8ND, 4: 1/16ND, 5: 1/64ND

CC: A: CROSS, B: 3200K, C: 4300K, D: 6300K

F8.0 (2000 lx, 89.9% reflection)

-62 dB (HD/59.94i)

2000 TV lines (at center) in 4K, 5% or higher modulation

Mic input

Return control

Prompter/Genlock

Prompter 2

DC input

DC output

Test out

SDI (1, 2)

SDI Monitor

Earphone

Tracker

Crane

Intercom (1, 2)

Remote

Network trunk

Lens

Viewfinder

USB


Optical/electrical multi-connector (LEMO 3K.93C connector) (x1)

XLR-type 3-pin, female (1 each)

For MIC: -60 dBu (can be set to a value up to -20 dBu using the menu or from the HDCU2000/2500), balanced

For LINE: 0 dBu, balanced

XLR-type 3-pin, female (x 1)

6-pin (x1)

BNC (x1), 1 Vp-p, 75 Ω

BNC (x1), 1 Vp-p, 75 Ω

XLR-type 4-pin (x1), DC 10.5 V to 17 V

4-pin (x1), DC 10.5 V to 17 V, 0.5 A (max.)

2-pin (x1), DC 10.5 V to 17 V, 2.5 A (max.)

(Limitations may apply, depending on the load and input conditions.)

BNC (x1)

BNC (1 each)

BNC (x1)

Stereo mini jack (x1)

10-pin (x1)

12-pin (x1)

XLR-type 5-pin, female (1 each)

8-pin (x1)

RJ-45 8-pin (x1)

12-pin (x1)

20-pin (x1)

USB 2.0, Type A, 4-pin (x1)

Operation manual (1), Cable clamp belt (1set), Number plates (1set),

Screws (+B3x8) (2)

BPU-4000

General

Power requirements


Storage temperature

Mass

Dimension (W x H x D)


Camera

CCU

Remote

LAN

SDI input

Reference input

3G/HD-SDI output

HD-SDI output

Reference output

Optical fiber (LEMO 3K.93C connector) (x1)

Optical fiber (LEMO 3K.93C connector) (x1)

8-pin multi-connector (x1)

8-pin (x1)

BNC (x2)

3G-SDI: SMPTE ST424/425 Level-B, 2.970 Gbps/2.967 Gbps

HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 Ω, 1.485 Gbps/1.4835 Gbps

BNC (x1)

HD: SMPTE ST274, tri-level sync, 0.6 Vp-p, 75 Ω

SD: Black burst (NTSC: 0.286 Vp-p, 75 Ω, PAL: 0.3 Vp-p, 75 Ω)

BNC (x18)

3G-SDI: SMPTE ST424/425 Level-A/B, 0.8 Vp-p, 75 Ω,

2.970 Gbps/2.967 Gbps

HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 Ω,

1.485 Gbps/1.4835 Gbps, 3G-SDI/HD-SDI selectable

BNC (x2)

SMPTE ST292, 0.8 Vp-p, 75 Ω, 1.485 Gbps/1.4835 Gbps

BNC (x1)

HD: SMPTE ST274, tri-level sync, 0.6 Vp-p, 75 Ω

SD: Composite sync, 0.3 Vp-p, 75 Ω,

HD sync/SD sync selectable


AC 100 V to AC 240 V, 50/60 Hz

5°C to 40°C (41°F to 104°F)

-20°C to +60°C (-4°F to +140°F)

Approx. 6.8 kg (15 lb)

424 x 66 x 395 mm (16 3/4 x 2 5/8 x15 5/8 inches) excluding protrusions

Number plates (1 set), Operation Guide (1), Operation Manual

(CD-ROM) (1)

HDCU-4300

General

Power supply

Current consumption


Storage temperature

Mass

Input/Output connectors

CAMERA

INTERCOM/TALLY/ PGM

AC 100 V to AC 240 V, 50/60 Hz

4.0 A (max)

5 °C to 40 °C (41 °F to 104 °F)

–20 °C to +60 °C (–4 °F to +140 °F)

Approx. 10.1 kg (22 lb 4.3 oz)

RCP/CNU

TRUNK

LAN

NETWORK TRUNK


Optical fiber connector (LEMO 3K.93C connector) (x1)

D-sub 25-pin connector (x1)

• INTERCOM (PROD/ENG), 4W/RTS/CC, 0 dBu • PGM, 2 systems, 0 dBu/–20 dBu

• TALLY (R, G, Y) • FLAG


12-pin (x1)

8-pin (x1)

8-pin (x1)

AC IN

SDI RET IN

100 V to 240 V AC (x1)

BNC (x2), 3G-SDI: SMPTE ST424/425, 2.970 Gbps/2.967 Gbps

HD-SDI: SMPTE ST292, 1.485 Gbps/1.4835 Gbps SD-SDI: SMPTE

ST259, 270 Mbps

BNC (x2), analog signal, 1.0 Vp-p, 75 Ω VBS RET IN

REFERENCE

PROMPTER

BNC (x2), loop-through output HD: SMPTE ST274, tri-level sync, 0.6

Vp-p, 75 Ω SD: Black burst (NTSC: 0.286 Vp-p, 75 Ω/PAL: 0.3 Vp-p, 75

Ω) or NTSC 10F-BB

BNC (x2), loop-through output during 1CH mode, terminate internally at 75 Ω during 2CH mode, analog signal, 1.0 Vp-p, 75 Ω


AUDIO OUT CH1, CH2

VBS MONITOR

CHARACTER/SYNC

XLR connector 3-pin, male (x2), 0 dBu/–20 dBu/ +4 dBu

BNC (x1), VBS, 1 Vp-p, 75 Ω

BNC (x1), VBS, 1 Vp-p, 75 Ω HD SYNC: BTA-S001, tri-level sync, 0.6

Vp-p, 75 Ω SD SYNC: composite sync, 0.3 Vp-p, 75 Ω VBS/HD SYNC/

SD SYNC selectable

SDI OUTPUT BNC (x4), 3G-SDI: SMPTE ST424/425, 0.8 Vp-p, 75 Ω, 2.970 Gbps/

2.967 Gbps HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 Ω, 1.485 Gbps/

1.4835 Gbps 3G-SDI/HD-SDI and character signal ON/OFF selectable


SDI I/O


Number plates (1 set), Operation guide (1), Operation manual (CD-ROM) (1)

Optional accessories

BNC (x2), 3G-SDI: SMPTE ST424/425, 0.8 Vp-p, 75 Ω, 2.970 Gbps/

2.967 Gbps HD-SDI: SMPTE 292, 0.8 Vp-p, 75 Ω, 1.485 Gbps/1.4835

Gbps

SD-SDI: SMPTE ST259, 0.8 Vp-p, 75 Ω, 270 Mbps

United States and Canada: Plug holder B (2-990-242-01) Other areas: Plug holder C (3-613-640-01)

United States and Canada: Power cord set (1-551-812-XX) Other areas: Power cord set (1-782-929-

XX)

CCA-5-3 Connection Cable (3 meters), CCA-5-10 Connection Cable (10 meters)

Maintenance manual

34

Specifications

HDCU-4300

General

Power supply

Current consumption


Storage temperature

Mass


CAMERA

INTERCOM/TALLY/ PGM

AC 100 V to AC 240 V, 50/60 Hz

4.0 A (max)

5 °C to 40 °C (41 °F to 104 °F)

–20 °C to +60 °C (–4 °F to +140 °F)

Approx. 10.1 kg (22 lb 4.3 oz)

RCP/CNU

TRUNK

LAN

NETWORK TRUNK


Optical fiber connector (LEMO 3K.93C connector) (x1)

D-sub 25-pin connector (x1)

• INTERCOM (PROD/ENG), 4W/RTS/CC, 0 dBu • PGM, 2 systems, 0 dBu/–20 dBu

• TALLY (R, G, Y) • FLAG


12-pin (x1)

8-pin (x1)

8-pin (x1)

AC IN

SDI RET IN

100 V to 240 V AC (x1)

BNC (x2), 3G-SDI: SMPTE ST424/425, 2.970 Gbps/2.967 Gbps

HD-SDI: SMPTE ST292, 1.485 Gbps/1.4835 Gbps SD-SDI: SMPTE

ST259, 270 Mbps

BNC (x2), analog signal, 1.0 Vp-p, 75 Ω VBS RET IN

REFERENCE

PROMPTER

BNC (x2), loop-through output HD: SMPTE ST274, tri-level sync, 0.6

Vp-p, 75 Ω SD: Black burst (NTSC: 0.286 Vp-p, 75 Ω/PAL: 0.3 Vp-p, 75

Ω) or NTSC 10F-BB

BNC (x2), loop-through output during 1CH mode, terminate internally at 75 Ω during 2CH mode, analog signal, 1.0 Vp-p, 75 Ω


AUDIO OUT CH1, CH2

VBS MONITOR

CHARACTER/SYNC

XLR connector 3-pin, male (x2), 0 dBu/–20 dBu/ +4 dBu

BNC (x1), VBS, 1 Vp-p, 75 Ω

BNC (x1), VBS, 1 Vp-p, 75 Ω HD SYNC: BTA-S001, tri-level sync, 0.6

Vp-p, 75 Ω SD SYNC: composite sync, 0.3 Vp-p, 75 Ω VBS/HD SYNC/

SD SYNC selectable

SDI OUTPUT BNC (x4), 3G-SDI: SMPTE ST424/425, 0.8 Vp-p, 75 Ω, 2.970 Gbps/

2.967 Gbps HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 Ω, 1.485 Gbps/

1.4835 Gbps 3G-SDI/HD-SDI and character signal ON/OFF selectable


SDI I/O


Number plates (1 set), Operation guide (1), Operation manual (CD-ROM) (1)


BNC (x2), 3G-SDI: SMPTE ST424/425, 0.8 Vp-p, 75 Ω, 2.970 Gbps/

2.967 Gbps HD-SDI: SMPTE 292, 0.8 Vp-p, 75 Ω, 1.485 Gbps/1.4835

Gbps

SD-SDI: SMPTE ST259, 0.8 Vp-p, 75 Ω, 270 Mbps

United States and Canada: Plug holder B (2-990-242-01) Other areas: Plug holder C (3-613-640-01)

United States and Canada: Power cord set (1-551-812-XX) Other areas: Power cord set (1-782-929-

XX)

CCA-5-3 Connection Cable (3 meters), CCA-5-10 Connection Cable (10 meters)

Maintenance manual

HDC-P1/HDFA-200 Specifications

HDC-P1

General

Power requirements DC 10.5 V to 17 V, 24 W (excluding peripherals)

Operating temperature −20°C to +45°C (−4°F to +113°F)

Storage temperature −20°C to +60°C (−4°F to +140°F)

Mass

Camera section

Pickup device

1.7 kg (3 lb 12 oz)

3-chip 2/3-inch type CCD

Effective picture elements (H x V)

Signal format

1920 x 1080

Spectrum system

Lens mount

Built-in filters

1080/50i, 1080/59.94i, 720/50p, 720/59.94p

(1080/23.98p, 1080/24p, 1080/25p, 1080/29.97p, 50/59.94p: option)

F1.4 prism

Sony bayonet mount

CC: A: CROSS, B:3200K, C: 4300K, D: 6300K

ND: 1: CLEAR, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND

F10 (at 1080/59.94i, 720/49.94p), F11 (at 1080/50i, 720/50p) Sensitivity

(at 2000 lx, 3200K,

89.9% reflectance)

Signal-to-noise ratio HD output: Typical 55 dB (NS Max. 62 dB)

SD output: Typical 65 dB (59.94 Hz)

Typical 63 dB (50.00 Hz)

Horizontal resolution 1,000 TV lines (at center)

Shutter speed 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 s (1080/59.94i)

1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 s (1080/50i)

Modulation depth Y: 45% at 27.5 MHz (800 TV lines with typical lens),

Pb/Pr: 80% of 12 MHz

Inputs/Outputs

Genlock input BNC (x1)

HD: SMPTE 274M, tri-level sync, 0.6 Vp-p, 75 Ω

SD: Black burst (NTSC: 0.286 Vp-p, 75 Ω/PAL: 0.3 Vp-p, 75 Ω)

SDI 1 output

SDI 2 output

VBS output

EXT I/O

Remote

Lens

LAN


BNC (x1) Can be switched between HD-SDI and SD-SDI

BNC (x1) Can be switched between HD-SDI and SD-SDI

BNC (x1)


8-pin (x1)

12-pin (x1)

RJ-45 (x1), 10BASE-T, 100BASE-TX

Operation manual (1), Number plates for up-tally lamp (1set)

Optional Accessories

Tripod Adaptor (VCT-14)

Remote Control Unit (RM-B170) Remote Control Panel (RM-B750)

Master Setup Unit (MSU-900/MSU-1000 series)

Remote Control Unit (RCP-700/RCP-920/RCP-1000 series)

HDFA-200

General

Power requirements AC 240 V, 1.2 A (max.), DC 180 V, 1.1 A (max.), DC 12 V, 10 A (max.)

Operating temperature −20°C to +45°C (−4°F to +113°F)

Mass

(the main unit only)

3.8 kg (8 lb 6 oz)


CCU Optical/electrical multi-connector (LEMO 3K.93C connector) (x1)

SDI input

REF output

CAM-MAIN (L): BNC (x1), CAM-SUB (R): BNC (x1)

CAM-MAIN (L): BNC (x1), CAM-SUB (R): BNC (x1)

SDI OUT

TEST output

SDI 1: BNC (x1), SDI 2: BNC (x1)

BNC (x1)

Prompter 1/Genlock in BNC (x1), 1 Vp-p, 75 Ω

Viewfinder 20-pin (x1)

Audio in 1, Audio in 2 XLR-type connector 3-pin, female (x1 each)

For MIC: −60 dBu (variable up to −20 dBu by menu or

HDCU-1000/1500 operation), balanced

For LINE: 0 dBu, balanced

Intercom XLR-type 5-pin, female (x1)

DC input XLR-type 4-pin (x1), DC 10.5 V to 17 V

CAM-MAIN (L) DC output XLR-type 4-pin, female (x1), DC 10.5 V to 17 V

CAM-SUB (R) DC output XLR-type 4-pin, female (x1), DC 10.5 V to 17 V

DC output (4 A max) XLR-type 4-pin, female (x1), DC 10.5 V to 17 V

DC output (0.5 A max) 4-pin (x1), DC 10.5 V to 17 V

Remote (L, R) CAM-MAIN (L): 8-pin (x1), CAM-SUB (R): 8-pin (x1)

Remote

AUX

8-pin (x1)

12-pin (x1)

RET CTRL

Tracker

Crane

Compatible devices

3D multi-camera

6-pin (x1)

10-pin (x1)

12-pin (x1)

HDC-P1

HDC-1500R, HDC-1400R, HDC-2400, HDC-2500

HDC-1500, HDC-2400, HDC-2500

Camera control unit

RGB 4:4:4 transmission

(2D) camera

Master Setup Unit

HDCU-1000*

F35

1 , HDCU-1500*

MSU-1000, MSU-1500

2 , HDCU-2000, HDCU-2500

Remote Control Panel RCP-1500, RCP-1501, RCP-1530


Operation manual (1), Cable clamp belt (1)


HD Electronic Viewfinder

HDVF-C550W (5-inch, color), HDVF-C730W (6.5-inch, color),

HDVF-EL75 (7.4-inch, color)

“Memory Stick Duo”, “Memory Stick PRO Duo”

*1 An HKCU-HB10 3G Fiber Transmission Unit is required.

*2 An HKCU-HB15 3G Fiber Transmission Unit is required.

MSU-1000/MSU-1500 Specifications

MSU-1000

General

Power requirements

Current consumption

AC 100 V to 240 V, 50/60 Hz

0.35 A

Operating temperature 5°C to 40°C (41°F to 104°F)

Maximum cable length 200 m (656 feet)

Mass 4.6 kg (10 lb 2.3 oz)

Dimensions (W x H x D) 482 x 67 x 222 mm

(19 x 2 3/4 x 8 3/4 inches)

Inputs/outputs

Remote CCU/CNU: 8-pin (x1)

AUX: 8-pin (x1)

I/O port

LAN

50-pin (x1)

RJ-45 (x1)

AC input

DC input

3-pin (x1)

4-pin (x1)

MSU-1500

3.6 kg (7 lb 15 oz)

204 x 354 x 67 mm

(8 1/8 x 14 x 2 3/4 inches)

HDLA-1500/HDLA-1505/HDLA-1507 Specifications

HDLA-1500 HDLA-1505 HDLA-1507

General

Power requirement

Operating temperature -20°C to +45°C (-4°F to +113°F)

Storage temperature -20°C to +60°C (-4°F to +140°F)

Mass

Input/output connector

Lens

DC input

DC output

AC 240 V (max. 1.2 A) / DC 180 V (max. 0.65 A),

DC 12 V (max. 9 A)

18.5 kg (40 lb 13 oz) 17.1 kg (37 lb 11 oz)

36-pin (x1)

XLR-4-pin (male) (x1), DC 10.5 to 17 V

4-pin (x1), DC 10.5 to 17 V, max 1.5 A

15.5 kg (34 lb 2.7 oz)

–

XLR-4-pin (female) (x1), DC 10.5 to 17 V, max 5.0 A

Viewfinder D-sub 25-pin (x1) – D-sub 25-pin (x1)

35

Distributed by

MK11190V3KURA17JAN

©2017 Sony Corporation. All rights reserved.

Reproduction in whole or in part without written permission is prohibited.

Features, design, and specifications are subject to change without notice.

The values for mass and dimension are approximate.

“SONY” is a registered trademark of Sony Corporation.

“Memory Stick” is a trademark of Sony Corporation.

Microsoft and Windows are trademarks of Microsoft Corporation.

All other trademarks are the property of their respective owners.

Production of some of the peripherals and related devices shown in the figures has been discontinued.

For advice on choosing devices, please contact your Sony dealer or a Sony sales representative.

No results