Vista-50P Data Sheet

VISTA-50P

CONTROL PANEL

Honeywell’s VISTA-50P Control Panel provides the flexibility of up to eight independent partitions with the economy of a single control.

FEATURES

Dependable features to meet your most demanding installations:

• Nine hardwired zones standard

• Expandable to 87 total zones

• Eight partitions standard

• 75 user codes work in all partitions

• Seven authority levels

• 224 event memory log/printer option

• Four trigger outputs

• 5800 wireless compatibility

• Supports two-wire multiplex

• Scheduling of events (real time clock)

• Keypad macro features

• Master console option for viewing all partitions at a glance

• Common lobby logic

• Fast downloading

• Supports up to 16 relays and/or X-10

• Quick start programming

• False alarm features

• UL Commercial Burglary listed

(VISTA-50PUL)

End users will appreciate the easy-to-use convenience and control features of the VISTA-50P:

• Wireless remote controls

(featuring single button system operation):

— 5804 - Four-Button Wireless Key

— 5804BD - Bi-Directional

Four-Button Wireless Key with system status feedback

• Single or dual-button wireless personal panic:

— 5802MN - 5802MN2

• Home control features activate lights, appliances, garage doors, and numerous other devices

• The VISTA Interactive Phone Module (VIP) gives the end user control of their system from any touchtone phone. The 4286 VIP responds in English, with a vocabulary of over 100 words

• Full English display keypads for clear understanding of system status and zone locations

• Timed event applications:

— Opens garage doors and turns on lights

— Provides“lived-in look” while away from home

— Ability to limit access to parts of the home at certain times

VISTA-50P

CONTROL PANEL

SPECIFICATIONS

Electrical:

• Aux power 12 VDC, 750mA max

• 16.5 VAC/40 VA transformer

• Alarm output 12 VDC,

1.7 Amps max

• For UL installations, combined

Aux and alarm output cannot exceed

750mA

Output Control:

• Supports up to four relay boards (Part

No. 4204)

• Each board supports four relays for a total of 16

• Optional X-10 interface (Part No.

4300) may be used to control X-10 receiving devices

• Each X-10 receiver address counts as one relay when computing total relays

• Real time clock can be used for relay/X-10 control

Zones:

• Nine hardwired zones

• Selectable response on zone 9:

10msec or 500msec

• Assignable to any partition

• 14 zone types to choose from

• Programmable swinger suppression

Communications

• Touchtone or pulse

• Formats supported: ADEMCO

Contact ID, ADEMCO 4 + 2 Express,

ADEMCO low speed

• 3+1, 4+1 and 4+2 reporting

• Reporting capabilities: Split,

Dual, Split/Dual

• Low battery reports 11.2-11.6 VDC

• Expanded reporting

• Up to four digit PABX codes supported

• True dial tone detection

• Double pole line seizure

• AC loss and restoral reporting supported

Supported Devices

Hardwired Expansion Devices:

• 4208U Eight-Zone

Expansion Module

• Keypads

— 6139 Custom English (required for programming) -100mA

— 6128 Fixed English LCD - 30mA

• Voice Module 4286 VIP-160mA

• Two-wire Smoke Detectors

ORDERING

VISTA-50P VISTA50P Control Panel

• Duct Detectors

• Serial Printer

• Polling Loop Devices

• Key Switch Devices

Wireless Receiver Systems:

• 5800 Series

— 5881ENL up to 8 zones-50mA

— 5881ENM up to 16 zones-50mA

— 5881ENH up to 86 zones-50mA

• All Receivers Support:

— Diversity reception with two antennea

— Remote mounting for best location

— Use of second receiver for maximum coverage or tough installations

— Unique supervision and low battery indications by point

Transmitters:

• 5800 Series

— Three volt Duracell lithium batteries

— One mile range

— Tamper standard

Agency Listings:

• UL Residential Fire and Burglary and CSFM

• UL Commercial Burglary

(VISTA-50PUL)

Honeywell Security & Custom Electronics

Honeywell International Inc.

PO Box 9035

Syosset, NY 11791 www.honeywell.com

RE06042

L/VIS50P/D

October 2006

© 2006 Honeywell International Inc.