- Computers & electronics
- Software
- Computer utilities
- Database software
- Filemaker
- FileMaker Pro 16
- User guide
advertisement
FileMaker
®
16
ODBC and JDBC Guide
© 2004–2017 FileMaker, Inc. All Rights Reserved.
FileMaker, Inc.
5201 Patrick Henry Drive
Santa Clara, California 95054
FileMaker, FileMaker Go, and the file folder logo are trademarks of FileMaker, Inc. registered in the U.S. and other countries.
FileMaker WebDirect and FileMaker Cloud are trademarks of FileMaker, Inc. All other trademarks are the property of their respective owners.
FileMaker documentation is copyrighted. You are not authorized to make additional copies or distribute this documentation without written permission from FileMaker. You may use this documentation solely with a valid licensed copy of FileMaker software.
All persons, companies, email addresses, and URLs listed in the examples are purely fictitious and any resemblance to existing persons, companies, email addresses, or URLs is purely coincidental. Credits are listed in the Acknowledgments documents provided with this software. Mention of third-party products and URLs is for informational purposes only and constitutes neither an endorsement nor a recommendation. FileMaker, Inc. assumes no responsibility with regard to the performance of these products.
For more information, visit our website at http://www.filemaker.com
.
Edition: 01
Contents
Chapter 1
Introduction
Where to find FileMaker documentation
Using FileMaker software as an ODBC client application
Adding ODBC tables to the relationships graph
Using a FileMaker database as a data source
Accessing a hosted FileMaker Pro database
Limitations with third-party tools
Updating files from previous versions
Chapter 2
Accessing external SQL data sources
Executing SQL to interact with data sources via ODBC
Working with ODBC tables in the relationships graph
Data sources supported in FileMaker 16
Adding ODBC tables to the relationships graph
Chapter 3
Installing FileMaker ODBC client drivers
Hardware and software requirements
ODBC client driver architecture overview (Windows)
ODBC client driver installation (Windows)
Configuring client drivers (Windows)
Opening the ODBC administrator (Windows)
ODBC client driver installation (macOS)
Configuring client drivers (macOS)
Chapter 4
Using ODBC to share FileMaker data
Overview of accessing a FileMaker database file
Accessing a FileMaker database file from a Windows application
Specifying ODBC client driver properties for a FileMaker DSN (Windows)
Verifying access via ODBC (Windows)
12
13
13
14
15
12
12
12
12
16
17
9
9
10
11
11
11
18
18
19
19
20
20
20
5
7
7
6
6
6
6
5
5
7
8
8
Contents
Accessing a FileMaker database file from a macOS application
Specifying ODBC client driver properties for a FileMaker DSN (macOS)
Verifying access via ODBC (macOS)
Chapter 5
Installing FileMaker JDBC client drivers
JDBC client driver installation
Chapter 6
Using JDBC to share FileMaker data
Using a JDBC URL to connect to your database
Specifying driver properties in the URL subname
Solutions with multiple FileMaker database files
Chapter 7
Reference information
Mapping FileMaker fields to ODBC data types
Mapping FileMaker fields to JDBC data types
Data types in 64-bit applications
22
22
22
22
23
21
21
21
24
27
27
28
24
24
24
25
29
30
30
30
31
29
29
29
30
32
4
Chapter 1
Introduction
This guide describes how you can use FileMaker ® software as an ODBC client application and as a data source for Open Database Connectivity (ODBC) and Java Database Connectivity (JDBC) applications.
The following table gives an overview of how to use ODBC and JDBC with FileMaker software.
What do you want to do?
How do you do it?
1 Use FileMaker software as an ODBC client application
1 Access ODBC data stored in an external SQL data source
1. Interactively via the relationships graph
2. One-time, static via
ODBC import or File menu > Open . Also, the
Import Records script step, the Execute SQL script step, and the
ExecuteSQL function
1 Use a FileMaker database as a data source
1 Share FileMaker Pro data with a third-party ODBC client application
1. ODBC and JDBC
2. SQL queries
Product
1 FileMaker Pro
1 FileMaker Pro Advanced
1 FileMaker Server
1 FileMaker Pro
1 FileMaker Pro Advanced
1 FileMaker Server
See
2.
FileMaker Pro Help
1. This guide, chapters 3 to 6
2.
FileMaker SQL
Reference
About this guide
1 This guide assumes that you are familiar with the basics of using ODBC and JDBC, and constructing SQL queries. FileMaker SQL Reference describes the SQL statements and standards supported by FileMaker. Refer to a third-party book on constructing SQL queries.
1 This guide uses “FileMaker Pro” to refer to both FileMaker Pro and FileMaker Pro Advanced, unless describing specific FileMaker Pro Advanced features.
Where to find FileMaker documentation
1 In FileMaker Pro, choose Help menu > Product Documentation .
1 In FileMaker Server Admin Console, choose Help menu > FileMaker Server Product
Documentation .
1 To learn about, view, or download additional FileMaker documentation, visit the Product
Documentation Center .
Chapter 1 | Introduction 6
About ODBC and JDBC
ODBC and JDBC are application programming interfaces (APIs). ODBC is an API for applications written in the C language, and JDBC is a similar API for the Java language. These APIs give client applications a common language for interacting with a variety of data sources and database services, including FileMaker Pro and FileMaker Server.
All applications that support ODBC and JDBC recognize a basic subset of SQL (Structured Query
Language) statements. Working with SQL, you can use other applications (such as spreadsheets, word processors, and reporting tools) to view, analyze, and modify data.
Using ODBC or JDBC APIs, a client application communicates with a driver manager that identifies the client driver to communicate with a data source.
Client
Application
Driver
Manager
Client
Driver
Data
Source
FileMaker software can act either as a client application or as a data source.
Using FileMaker software as an ODBC client application
As an ODBC client application, FileMaker software can access data in external SQL data sources.
FileMaker software connects to the external SQL data source using the client driver for the ODBC data source, and either imports ODBC data or works with ODBC tables in the relationships graph.
Importing ODBC data
You can import ODBC data in either of these ways:
1 from the File menu, by specifying an ODBC data source and entering SQL statements in the
FileMaker Pro SQL Query builder dialog box
1 by creating a FileMaker script that uses the Import Records script step, the Execute SQL script step, or the ExecuteSQL function
For either of these methods, you enter the SQL statements yourself, so you need to know the supported SQL statements and their syntax for your ODBC data source. And because you write the SQL statements, you can import ODBC data from any ODBC data source. See FileMaker SQL
Reference for information on SQL statements and syntax supported by FileMaker.
Adding ODBC tables to the relationships graph
When you add an ODBC table to the relationships graph, you can connect to and work with data in external SQL data sources in much the same way that you work with data in the current, active
FileMaker database file. For example, you can:
1 create tables in the relationships graph for ODBC data sources
1 add supplemental fields to ODBC tables to perform unstored calculations or to summarize data in the ODBC tables
1 add, change, and delete external data interactively
1 create relationships between fields in FileMaker tables and fields (also called “columns”) in
ODBC tables
Chapter 1 | Introduction 7
Because FileMaker Pro generates the SQL statements used to communicate with an ODBC table that has been added to the relationships graph, you are limited to the specific Oracle, SQL Server, and MySQL data sources that FileMaker Pro supports in the relationships graph.
Note You cannot modify the schema of external ODBC data sources using FileMaker Pro.
Chapter 2, “Accessing external SQL data sources,” describes how to use FileMaker software as
an ODBC client application.
Using a FileMaker database as a data source
As a data source, FileMaker data is shared with ODBC- and JDBC-compliant applications. The application connects to the FileMaker data source using the FileMaker client driver, constructs and executes the SQL queries using ODBC or JDBC, and processes the data retrieved from the
FileMaker database solution.
Accessing a hosted FileMaker Pro database
With either FileMaker Server or FileMaker Pro, you can host a FileMaker database file as a data source, sharing your data with other applications using ODBC and JDBC. The following table describes what each FileMaker product allows.
This FileMaker product
FileMaker Server
FileMaker Pro
Allows
Unlimited connections and supports local access (same computer) and remote access
(both for middleware such as web servers, and for remote client access from desktop productivity applications).
Up to five connections and supports local access (same computer) only.
If your FileMaker database solution uses more than one FileMaker database file, all of the database files must be on the same computer.
To access a hosted FileMaker database file, you need to install the corresponding ODBC or JDBC client driver. Install the client driver on the machine where the third-party application is installed.
This guide documents how the ODBC and JDBC client drivers, when used with FileMaker Pro and
FileMaker Server, support the industry standards for ODBC and JDBC.
To learn about the SQL statements supported by ODBC and JDBC client drivers when used with
FileMaker Pro and FileMaker Server, see FileMaker SQL Reference .
Important If you disable ODBC/JDBC sharing after it has already been on, a data source hosted by FileMaker Server or FileMaker Pro immediately becomes unavailable. The database administrator doesn’t have the capability to alert ODBC and JDBC client applications about the data source’s availability (the administrator can communicate only with FileMaker database file clients). No errors are reported, and the client application should notify users that the data source is not available and transactions cannot be completed. If a client application attempts to connect to an unavailable FileMaker database file, a message explains that the connection failed.
Limitations with third-party tools
Microsoft Access: When using Microsoft Access to view data in a FileMaker data source, do not use data from a summary field. The summary field’s data should not be edited in Microsoft Access, and the data value that is displayed in Microsoft Access may not be accurate.
Chapter 1 | Introduction 8
Networking requirements
You need a TCP/IP network when using FileMaker Server to host a FileMaker database file as a data source over a network. FileMaker Pro supports local access (same computer) only.
Updating files from previous versions
If you installed a driver from earlier versions of FileMaker Pro or FileMaker Server, you must install the driver for version 16.
The driver for FileMaker version 16 is not compatible with earlier versions of FileMaker Pro or
FileMaker Server.
See chapter 3, “Installing FileMaker ODBC client drivers,” and chapter 5, “Installing FileMaker
Notes
1 You have to create a Data Source Name (DSN) for each FileMaker database file you want to access as a data source. If you have previously set up access through one DSN that allows tables to be spread among several FileMaker database files, you’ll need to consolidate those tables into a single database file (or create several DSNs).
1 For information on using ODBC and JDBC with previous versions of FileMaker Pro, see the
Product Documentation Center .
Chapter 2
Accessing external SQL data sources
As an ODBC client application, FileMaker software can access data in external SQL data sources.
FileMaker software connects to the external SQL data source using the client driver for the ODBC data source, and either imports ODBC data or works with ODBC tables in the relationships graph.
Whether you are importing ODBC data or working with ODBC tables in the relationships graph, you must configure a driver for the ODBC data source you’re using. For example, to access records from an Oracle database, you configure an Oracle client driver.
Importing ODBC data
When you import ODBC data, you need an ODBC client driver for the external SQL data source configured on the client machine.
FileMaker Pro Driver manager
Client driver
SQL data source
After configuring an ODBC client driver, you can interact with records, import records into an existing FileMaker Pro database file, or create a new FileMaker Pro database file from an ODBC data source (such as Oracle or Microsoft Access databases).
First, you access the data source you want to import from. Then you construct a query for the records you want to import from the data source. Finally, if you’re importing data into an existing file, you map fields from your data source to fields in your FileMaker Pro database file.
You can access your ODBC data source through the File menu, with the Import Records script step, with the Execute SQL script step, or with the ExecuteSQL function.
To import ODBC data, follow this general process:
1. Install and configure specific ODBC drivers for the external data sources you want to access.
2. On the computer that hosts the current FileMaker Pro file, define a system DSN for each ODBC data source you want to access.
3. Determine any additional considerations for the ODBC data sources you want to access (for example, whether users are prompted for a user name and password).
4. In FileMaker Pro, do one of the following:
1 To import into an existing FileMaker Pro file, choose File menu > Import Records > ODBC
Data Source .
1 To create a FileMaker Pro file from the data source records, choose File menu > Open . In the Launch Center, click Browse , then choose ODBC Data Source for Files of type
(Windows) or Show (macOS).
Chapter 2 | Accessing external SQL data sources 10
5. Choose your data source, enter the user name and password (if any), and click OK to open the
FileMaker Pro SQL Query builder dialog box.
6. Using the FileMaker Pro SQL Query builder dialog box, you can construct a query. Select the table from which you want to import, and then select specific columns you want to use in your
SQL query. Use the WHERE tab to construct search criteria and the ORDER BY tab to specify a sort order.
You can also type an SQL statement directly into the SQL Query builder dialog box.
You can execute the query immediately, or you can use the Import Records script step, the
Execute SQL script step, or the ExecuteSQL function to execute a query as part of a FileMaker script.
Note ODBC import, the Execute SQL script step, and external SQL data sources are not supported in runtime solutions created with FileMaker Pro Advanced.
See FileMaker Pro Help for information on importing data, using the SQL Query builder dialog box, and creating FileMaker scripts. See FileMaker SQL Reference for information on SQL statements and syntax supported by FileMaker.
Executing SQL to interact with data sources via ODBC
In addition to importing data into a FileMaker Pro database file via ODBC, you can also interact with data sources using SQL statements through the Execute SQL script step and the
ExecuteSQL function. The Execute SQL script step may use any SQL statement supported by the data source, such as INSERT, UPDATE, and DELETE. The ExecuteSQL function supports only the SELECT statement.
You can also use SQL statements that go beyond simply importing data into a FileMaker Pro database file. For example, you could execute SQL statements that add records to a database table in SQL Server, using information from a FileMaker Pro database file.
See FileMaker Pro Help for information on creating FileMaker scripts that use the Execute SQL script step and the ExecuteSQL function. See FileMaker SQL Reference for information on SQL statements and syntax supported by FileMaker.
Chapter 2 | Accessing external SQL data sources 11
Working with ODBC tables in the relationships graph
When you add an ODBC table to the relationships graph, you can connect to and work with data in external SQL data sources in much the same way that you work with data in the current, active
FileMaker database file.
When you use FileMaker Pro or FileMaker Server as the host for a solution that includes ODBC tables in the relationships graph, you configure the ODBC client driver for the external SQL data source on the host machine.
FileMaker Pro user
FileMaker Pro user
FileMaker Pro or
FileMaker
Server host
Driver manager
Client driver SQL data source
FileMaker Pro user
Data sources supported in FileMaker 16
As an ODBC client application, FileMaker supports external SQL data sources such as Oracle,
Microsoft SQL Server, and MySQL Community Edition as ODBC tables in the relationships graph.
For information about the supported external SQL data sources, search the FileMaker Knowledge
Base .
Adding ODBC tables to the relationships graph
To set up a FileMaker Pro database to access data in supported ODBC data sources:
1. Install and configure specific ODBC drivers for the external data sources you want to access.
2. On the computer that hosts the current FileMaker Pro file, define a system DSN for each ODBC data source you want to access.
3. Determine any additional considerations for ODBC data sources you want to access (for example, whether users are prompted for a user name and password).
4. Add one or more tables from the ODBC data source to the relationships graph in the current
FileMaker Pro file.
5. Add fields to layouts in the FileMaker Pro file to display external data.
6. Optionally, add supplemental fields to external tables and layouts to display calculation and summary results based on data stored in external ODBC data sources.
See FileMaker Pro Help for detailed steps and additional information on configuring an ODBC client driver, connecting to ODBC data sources, editing ODBC data sources, and setting up an
ODBC table in the relationships graph.
Chapter 3
Installing FileMaker ODBC client drivers
To access a hosted FileMaker database file as an ODBC data source, you need to install the
ODBC client driver. These instructions help you install the ODBC client driver needed to access
FileMaker as a data source from third-party and custom applications via ODBC. Install the client driver on the machine where the third-party application is installed.
As described below, the ODBC client driver is available through a separate installation on your
FileMaker installation disk or electronic download in the xDBC folder.
Check for updates to the client drivers on the FileMaker downloads and resources page .
If you’ll be hosting a FileMaker database file using FileMaker Server, make the client drivers available to remote users.
After installing the client driver you need, you can configure the driver to access a FileMaker data source and construct SQL queries to interact with the data.
Hardware and software requirements
To install and use the ODBC client drivers, you need to meet the minimum hardware and software requirements described in the FileMaker system requirements .
Networking requirements
If you’ll be accessing a FileMaker data source hosted on another computer, you’ll need network access via TCP/IP.
ODBC client driver architecture overview (Windows)
FileMaker provides 32-bit and 64-bit client drivers for Windows, to support 32-bit and 64-bit ODBC applications.
You must install the client driver that matches your ODBC application, not your operating system:
1 If your ODBC application is a 32-bit application, then install the 32-bit client driver.
1 If your ODBC application is a 64-bit application, then install the 64-bit client driver.
ODBC client driver installation (Windows)
Windows 32-bit and 64-bit client drivers are installed as separate libraries. On a 32-bit version of the Windows operating system, you can install the 32-bit client driver only. On a 64-bit version of the Windows operating system, you can install both the 32-bit and 64-bit client drivers.
To install the ODBC client driver:
1. Do one of the following:
1 If you received your software electronically, double-click the installation icon (.exe file).
1 If you have an installation disk, insert the disk into the drive.
2. In the FileMaker Pro or FileMaker Server window, double-click the Extras folder.
Chapter 3 | Installing FileMaker ODBC client drivers 13
3. Double-click the xDBC folder.
4. In the xDBC folder, double-click the ODBC Client Driver Installer folder.
5. In the ODBC Client Driver Installer folder, double-click the installer file for the driver you want to install.
1 To install the 32-bit client driver (fmodbc32.dll), use the 32-bit installer file:
FMODBC_Installer_Win32.msi
1 To install the 64-bit client driver (fmodbc64.dll), use the 64-bit installer file:
FMODBC_Installer_Win64.msi
6. Install the ODBC client driver by following the onscreen instructions.
7. When the installation is complete, click Close .
By default, the ODBC client driver will be installed in this folder:
1 On a 32-bit version of the Windows operating system, the 32-bit client driver (fmodbc32.dll) is installed in C:\Windows\System32
1 On a 64-bit version of the Windows operating system, the 32-bit client driver (fmodbc32.dll) is installed in C:\Windows\SysWOW64
1 On a 64-bit version of the Windows operating system, the 64-bit client driver (fmodbc64.dll) is installed in C:\Windows\System32
The ODBC client driver, FileMaker ODBC , is now available for you to configure for accessing a FileMaker data source.
Configuring client drivers (Windows)
Before using an ODBC client application to access a FileMaker data source, you must configure a client driver for the data source. Configuration settings identify the client driver you’re using, the location of the data source, and details on how you intend to connect.
Important When using a FileMaker client driver, you must reserve 2399 as the port.
Opening the ODBC administrator (Windows)
To open the ODBC administrator, use the Administrative Tools control panel in the System and
Security category.
To open the 32-bit ODBC administrator on a 32-bit Windows operating system:
In Windows Control Panel, open Administrative Tools > Data Sources (ODBC) .
To open the 32-bit ODBC administrator on a 64-bit Windows operating system:
In Windows Control Panel, open Administrative Tools > ODBC Data Sources (32-bit) .
To open the 64-bit ODBC administrator on a 64-bit Windows operating system:
In Windows Control Panel, open Administrative Tools > ODBC Data Sources (64-bit) .
Chapter 3 | Installing FileMaker ODBC client drivers 14
Configuring the DSN (Windows)
To configure the ODBC client driver:
1. In the ODBC Data Source Administrator, select the System DSN or User DSN tab. You create a DSN for each FileMaker database file you want to access as a data source.
2. Click Add .
3. Select FileMaker ODBC , and click Finish .
4. Click Next .
5. For Name , enter a name that will be meaningful to others accessing the FileMaker data source.
For Description , enter an optional description of the FileMaker data source. Click Next .
6. For Host :
1 If you’re connecting to a database file hosted by FileMaker Pro on your local machine, enter localhost or the IP address 127.0.0.1.
1 If you’re connecting to a database file hosted by FileMaker Server over a network, enter the
IP address of the FileMaker Server.
If you have enabled sharing via ODBC/JDBC in the host application, you can select Connect to host to obtain the names of available databases . Click Next .
Otherwise, click Finish to save your data source information.
7. For Database , select a database from the list of available databases, or type the filename of the FileMaker database file you’re using as a data source.
Note For database files hosted by FileMaker Server, the list of databases may be filtered based on the File Display Filter setting. See FileMaker Server Help for information. The sample file FMServer_Sample cannot be used to test ODBC connections. To test ODBC connections, upload your own database.
1 If you need special handling of non-English text, click Advanced Language .
To auto-detect language settings, select the Auto-detect language settings for application option. To specify the language setting, clear the Auto-detect language settings for application option and select the system setting you want to use.
For the Multi-byte text encoding option, select System or select UTF-8 . For example, some applications such as Microsoft Excel may expect text to be encoded using the System encoding, but web applications may expect text to be encoded using UTF-8 encoding. If the application expects a specific encoding but this option specifies a different encoding, then the application may display some characters incorrectly. FileMaker supports UTF-8 multibyte characters consisting of up to three bytes.
1 Select the Describe text fields as long varchar option to correct issues with long field values, such as using fields that do not have a maximum length specified in Microsoft Word
Mail Merge import, or field values in PHP applications that are longer than 255 characters. If you do not use this option for field values longer than 255 characters, then your application may retrieve an empty string (Windows) or only 255 characters (macOS).
Chapter 3 | Installing FileMaker ODBC client drivers 15
1 If you want to create a log file for long-running queries, select the Save long-running queries to a log file option, and enter the name for the log file.
Click Finish to save your data source information.
8. Review the information about your FileMaker DSN.
1 Click Test to verify that you have correctly configured the ODBC client driver to access the
FileMaker data source.
The connection information indicates whether SSL is enabled and provides information about the SSL certificate installed if SSL is enabled. The xDBC Listener uses the SSL certificate installed in the CStore folder on the server if a certificate is available. See your
FileMaker Server administrator for information about the installed certificate.
If you receive an error message, you can correct the connection information. You may also need to check that the FileMaker database file is hosted and available, that the FileMaker account specified uses a privilege set with the fmxdbc extended privilege for access via
ODBC/JDBC, and that the FileMaker Server or FileMaker Pro host application has been set up for sharing via ODBC/JDBC.
1 Click Done to save your data source information.
ODBC client driver installation (macOS)
The client driver is installed to the /Library/ODBC folder.
To install the ODBC client driver:
1. Do one of the following:
1 If you received your software electronically, double-click the disk image icon (.dmg file).
1 If you have an installation disk, insert the disk into the drive.
2. In the FileMaker Pro or FileMaker Server window, double-click the Extras folder.
3. Double-click the xDBC folder.
4. In the xDBC folder, double-click the ODBC Client Driver Installer folder.
5. In the ODBC Client Driver Installer folder, double-click FileMaker ODBC.pkg
.
6. Install the ODBC client driver by following the onscreen instructions.
7. When the installation is complete, click Close .
The ODBC client driver will be installed in this folder: /Library/ODBC
Note You cannot change the installation folder for the ODBC client driver.
The ODBC client driver, FileMaker ODBC , is now available for you to configure for accessing a FileMaker data source.
Chapter 3 | Installing FileMaker ODBC client drivers 16
Configuring client drivers (macOS)
Before using an ODBC client application to access a FileMaker data source, you must configure a client driver for the data source. Configuration settings identify the client driver you’re using, the location of the data source, and details on how you intend to connect.
These instructions assume you have installed the ODBC Manager from Actual Technologies, which is a freeware product not supported by FileMaker.
Important When using a FileMaker client driver, you must reserve 2399 as the port.
To configure the ODBC client driver:
1. Launch the ODBC Manager utility. (ODBC Manager is installed in the Utilities folder in the
Applications folder.)
2. Select the System DSN or User DSN tab. You create a DSN for each FileMaker database file you want to access as a data source.
3. Click Add .
4. Select FileMaker ODBC , and click OK .
5. Click Continue .
6. For Name , enter a name that will be meaningful to others accessing the FileMaker data source.
For Description , enter an optional description of the FileMaker data source. Click Continue .
7. For Host :
1 If you’re connecting to a database file hosted by FileMaker Pro on your local machine, enter localhost or the IP address 127.0.0.1.
1 If you’re connecting to a database file hosted by FileMaker Server over a network, enter the
IP address of the FileMaker Server.
If you have enabled sharing via ODBC/JDBC in the host application, you can select Connect to host to obtain the names of available databases . Click Continue .
Otherwise, click Finish to save your data source information.
8. For Database , select a database from the list of available databases, or type the filename of the FileMaker database file you’re using as a data source.
Note For database files hosted by FileMaker Server, the list of databases may be filtered based on the File Display Filter setting. See FileMaker Server Help for information. The sample file FMServer_Sample cannot be used to test ODBC connections. To test ODBC connections, upload your own database.
1 If you need special handling of non-English text, click Advanced Language .
To auto-detect language settings, select the Auto-detect language settings for application option. To specify the language setting, clear the Auto-detect language settings for application option and select a system setting.
If your application uses ODBC functions with character buffers whose characters are 4 bytes wide, select the Application uses the "wide" ODBC API option.
Chapter 3 | Installing FileMaker ODBC client drivers 17
If you want the SQL_C_CHAR text type to be interpreted by the driver as the SQL_C_WCHAR text type, select the Treat text types as Unicode option.
For the Multi-byte text encoding option, select System (MacRoman) or select UTF-8 . For example, some applications such as Microsoft Excel may expect text to be encoded using the System encoding, but web applications may expect text to be encoded using UTF-8 encoding. If the application expects a specific encoding but this option specifies a different encoding, then the application may display some characters incorrectly. FileMaker supports
UTF-8 multibyte characters consisting of up to three bytes.
1 Select the Describe text fields as long varchar option to correct issues with long field values, such as fields that do not have a maximum length specified getting used for Microsoft
Word Mail Merge import, or field values in PHP applications that are longer than 255 characters.
1 If you want to create a log file for long-running queries, select the Save long-running queries to a log file option, and enter the name for the log file. You can also change the
Long query time value.
Click Finish to save your data source information.
9. Review the information about your FileMaker DSN.
1 Click Test to verify that you have correctly configured the ODBC client driver to access the
FileMaker data source.
The connection information indicates whether SSL is enabled and provides information about the SSL certificate installed if SSL is enabled. The xDBC Listener uses the SSL certificate installed in the CStore folder on the server if a certificate is available. See your
FileMaker Server administrator for information about the installed certificate.
If you receive an error message, you can correct the connection information. You may also need to check that the FileMaker database file is hosted and available, that the FileMaker account specified uses a privilege set with the fmxdbc extended privilege for access via
ODBC/JDBC, and that the FileMaker Server or FileMaker Pro host application has been set up for sharing via ODBC/JDBC.
1 Click Done to save your data source information.
Where to go from here
After you install and configure a client driver, you can construct and execute SQL queries to access a FileMaker data source.
Client applications sometimes use different terminology for accessing a data source via ODBC.
Many applications have menu items with names such as Get external data or SQL query . Review the documentation or Help that comes with your application for details.
See chapter 4, “Using ODBC to share FileMaker data.”
Chapter 4
Using ODBC to share FileMaker data
Use the ODBC client driver to connect to a FileMaker data source from another application. The application that uses the ODBC client driver can directly access the data in a FileMaker database file.
The FileMaker ODBC client driver is FileMaker ODBC .
Note You can also use FileMaker Pro as an ODBC client application, interacting with records
About ODBC
ODBC is an API that enables applications to access data from many database management systems. ODBC gives client applications a common language for interacting with data sources and database services.
All applications that support ODBC recognize a basic subset of SQL (Structured Query Language) statements. SQL lets you use other applications (such as spreadsheets, word processors, and reporting tools) to view, analyze, and modify FileMaker data. See FileMaker SQL Reference for the SQL statements, functions, and expressions that the ODBC client driver supports.
Your application can access data in a FileMaker database file by using the ODBC client driver.
Your SQL statements are delivered to the FileMaker host of the database file, and the results of those statements are sent back to your application. If you use FileMaker Server to host a
FileMaker database file as a data source, the database file can be located on another machine
(the server machine) connected to the network, while your client application is located on your machine (the client machine). This is referred to as a client/server configuration.
Client application
Driver manager
Oracle
ODBC driver
Oracle
SQL Server
ODBC driver
FileMaker
ODBC client driver
FileMaker Microsoft
SQL Server
Chapter 4 | Using ODBC to share FileMaker data 19
Using the ODBC client driver
The ODBC client driver supports ODBC 3.0 Level 1. You can use the ODBC client driver with any
ODBC-compliant application. Sharing your FileMaker database file as a data source, you can:
1 perform mail merges with Microsoft Word
1 create charts with Microsoft Excel
1 move FileMaker data to a DBMS like Microsoft SQL Server
1 further analyze your FileMaker data with query or reporting tools to create charts, construct ad hoc queries, and perform drill-down analyses
1 create a Microsoft Visual Basic application that shares information with FileMaker Pro
To share a FileMaker database file as a data source, use FileMaker Pro to define accounts that need access to the database file. Then, control access to the database file by assigning privilege sets to the accounts, including the fmxdbc extended privilege for access via ODBC/JDBC. Finally, enable the FileMaker Server or FileMaker Pro host application to share data via ODBC/JDBC. For details, see FileMaker Pro Help or FileMaker Server Help .
Important Prior versions of the FileMaker ODBC client driver are not compatible with
FileMaker 16. To connect to a FileMaker 16 database file, you need to install and configure the new ODBC client driver.
Note To confirm that the FileMaker XDBC Listener is currently running, you can use the Activity
Monitor on macOS or the Task Manager on Windows to check the status of the FileMaker XDBC
Listener process. When the process is started, it is named fmxdbc_listener, and events are logged by that name. The FileMaker XDBC Listener process is separate from the FileMaker Server process. You can use FileMaker Server Admin Console to stop and start the XDBC Listener process. On the FileMaker Server Status pane, set ODBC/JDBC to OFF to stop the XDBC
Listener and set ODBC/JDBC to ON to start the XDBC Listener.
Overview of accessing a FileMaker database file
From an ODBC-compliant application, you can construct SQL queries to access a FileMaker database file. The ODBC client driver must be installed on the computer generating the SQL query.
To access a FileMaker database file:
1. In FileMaker Pro, review the privilege sets you’ve assigned to accounts that will access the database file.
Accounts that need access must use a privilege set with the fmxdbc extended privilege for access via ODBC/JDBC.
2. Enable the FileMaker Server (via FileMaker Server Admin Console) or FileMaker Pro host application to share data via ODBC/JDBC.
FileMaker Server Admin Console: Choose General Settings > ODBC/JDBC , then select
Enable ODBC/JDBC .
FileMaker Pro: Choose File menu > Sharing > Enable ODBC/JDBC , then set ODBC/JDBC
Sharing to On .
Chapter 4 | Using ODBC to share FileMaker data 20
3. Make sure the FileMaker database file you want to access is hosted and available.
If your FileMaker database solution uses more than one FileMaker database file, all of the database files must be on the same computer.
4. Connect to the FileMaker data source.
5. Construct and execute an SQL query in the client application.
Each FileMaker database file that is open and set up for access is a separate data source (you create a DSN for each FileMaker database file you want to access as a data source).
Each database can have one or more tables. FileMaker fields are represented as columns. The complete field name, including any non-alphanumeric characters, displays as the column name.
Accessing a FileMaker database file from a Windows application
Specifying ODBC client driver properties for a FileMaker DSN (Windows)
Create a DSN for each FileMaker database file you want to access as a data source. The DSN identifies the FileMaker ODBC client driver, the location of the FileMaker host application, and the
FileMaker database file you’re accessing as a data source.
For information on creating a DSN, see “Configuring client drivers (Windows)” on page 13.
Verifying access via ODBC (Windows)
To verify that you’ve correctly configured the ODBC client driver to access the FileMaker data source:
2. Select the System DSN or User DSN tab (select the tab used when you previously configured).
3. Choose the FileMaker data source that you previously configured.
The DSN you originally entered appears under Name , and FileMaker ODBC appears as the
Driver .
4. Click Configure .
5. Click Next until you reach the Conclusion page.
6. Click Test .
Enter your FileMaker account name (in Database User Name ) and password (in Database
Password ).
Chapter 4 | Using ODBC to share FileMaker data 21
If the connection is successful, you receive the message Test completed successfully .
If the connection fails:
1 Make sure the FileMaker database file is hosted and available.
1 Update or correct your connection information.
1 Make sure your FileMaker account uses a privilege set with the fmxdbc extended privilege for access via ODBC/JDBC.
1 Verify that the FileMaker Server or FileMaker Pro host application has been set up for sharing via ODBC/JDBC.
Accessing a FileMaker database file from a macOS application
Specifying ODBC client driver properties for a FileMaker DSN (macOS)
Create a DSN for each FileMaker database file you want to access as a data source. The DSN identifies the FileMaker ODBC client driver, the location of the FileMaker host application, and the
FileMaker database file you’re accessing as a data source.
For information on creating a DSN, see “Configuring client drivers (macOS)” on page 16.
Verifying access via ODBC (macOS)
To verify that you’ve correctly configured the ODBC client driver to access the FileMaker data source:
1. Launch the ODBC Manager utility. (The ODBC Manager is located in the Utilities folder in the
Applications folder.)
2. Select the System DSN or User DSN tab (select the tab used when you previously configured).
3. Choose the FileMaker data source that you previously configured.
The DSN you originally entered appears under Name , and FileMaker ODBC appears as the
Driver .
4. Click Configure .
5. Click Continue until you reach the Conclusion page.
6. Click Test .
Enter your FileMaker account name (in Database User Name ) and password (in Database
Password ).
If the connection is successful, you receive the message Test completed successfully .
If the connection fails:
1 Make sure the FileMaker database file is hosted and available.
1 Update or correct your connection information.
1 Make sure your FileMaker account uses a privilege set with the fmxdbc extended privilege for access via ODBC/JDBC.
1 Verify that the FileMaker Server or FileMaker Pro host application has been set up for sharing via ODBC/JDBC.
Chapter 5
Installing FileMaker JDBC client drivers
To access a hosted FileMaker database file as a JDBC data source, you need to install the JDBC client driver. These instructions help you install the client driver needed to access FileMaker as a data source from third-party and custom applications via JDBC. Install the client driver on the machine where the third-party application is installed.
Check for updates to the client drivers on the FileMaker downloads and resources page .
If you’ll be hosting a FileMaker database file using FileMaker Server, make the client drivers available to remote users.
After installing the client driver you need, you can configure the driver to access a FileMaker data source and construct SQL queries to interact with the data.
The JDBC client driver constitutes the driver portions of the FileMaker software that allow thirdparty applications or custom applications to access FileMaker files as JDBC data sources.
Software requirements
To install and use the JDBC client drivers, you need JDK 1.6 or later.
To find which version of Java you’re running, open a command window (Windows) or Terminal window (macOS) and type java -version.
Networking requirements
If you’ll be accessing a FileMaker data source hosted on another computer, you’ll need network access via TCP/IP.
JDBC client driver installation
You must have write access to the folder where you’re installing the JDBC client driver.
To install the JDBC client driver:
1. Do one of the following:
1 Windows: If you received your software electronically, double-click the installation icon (.exe file).
1 macOS: If you received your software electronically, double-click the disk image icon (.dmg file).
1 If you have an installation disk, insert the disk into the drive.
2. In the FileMaker Pro or FileMaker Server window, double-click the Extras folder.
3. Double-click the xDBC folder.
4. In the xDBC folder, double-click the JDBC Client Driver Installer folder.
Chapter 5 | Installing FileMaker JDBC client drivers 23
5. Copy the fmjdbc.jar file to the appropriate folder for your operating system:
1 Windows: Copy the fmjdbc.jar file to the folder that includes your Java executable file
(java.exe) or to another folder location included in the ClassPath of your Java application.
1 macOS: Copy the fmjdbc.jar file to the /Library/Java/Extensions folder or to another folder location included in the ClassPath of your Java application.
You can now use the JDBC client driver to access a FileMaker data source.
Using the JDBC client driver
Your Java application or applet must register the JDBC client driver with the JDBC driver manager, and you must specify the correct JDBC URL (Uniform Resource Locator) from within the application or applet.
Important You must reserve the port 2399 for the FileMaker JDBC client driver. The port number is always 2399. You cannot change the JDBC sharing to a different port.
See chapter 6, “Using JDBC to share FileMaker data.”
Chapter 6
Using JDBC to share FileMaker data
If you’re a Java programmer, you can use the JDBC client driver with any Rapid Application
Development (RAD) tool to visually create a Java application or applet that connects to a
FileMaker data source. The Java application or applet that uses the JDBC client driver can directly access the data in a FileMaker database file.
About JDBC
JDBC is a Java API for executing SQL statements, the standard language for accessing relational databases. JDBC is a low-level interface, which means that it is used to call SQL commands directly. It is also designed to be used as a base for higher-level interfaces and tools.
Your Java applet or application can access data in a FileMaker database file by using the JDBC client driver. Your SQL statements are delivered to the FileMaker host of the database file, and the results of those statements are sent back to your application. If you use FileMaker Server to host, the FileMaker database file you’re using as a data source can be located on another machine (the server machine) connected to the network, while your Java applet or client application is located on your machine (the client machine). This is referred to as a client/server configuration.
Java application
JDBC driver
FileMaker
Client machine Database server
Using the JDBC client driver
You can use the JDBC client driver with a Java compiler or RAD tool to connect with your database while you build the code for your Java application or applet. After the Java application or applet has been created, the JDBC client driver must be present with the files or included within the code in order for the application or applet to communicate with the database.
To use the JDBC client driver, your Java application or applet must register the driver with the
JDBC driver manager and you must specify the correct JDBC URL from within the application or applet. You need the JDBC URL to make the connection to the database.
About the JDBC client driver
The JDBC client driver provides partial support for the JDBC 3.0 specification. The following features are not supported by FileMaker:
1 SAVEPOINT statements
1 retrieval of auto-generated keys
1 passing parameters to a callable statement object by name
1 holdable cursors
1 retrieving and updating the object referenced by a Ref object
Chapter 6 | Using JDBC to share FileMaker data 25
1 updating of columns containing CLOB, ARRAY, and REF data types
1 Boolean data type
1 DATALINK data type
1 transform groups and type mapping
1 relationships between the JDBC SPI and the Connector architecture
The JDBC client driver has been tested against the Java Development Kit (JDK) 1.6, 1.7, and 1.8.
It is a Type 4 driver—a native protocol, pure Java driver that converts JDBC calls directly into the network protocol used by FileMaker. This type of driver offers all the advantages of Java, including automatic installation (for example, downloading the JDBC driver with an applet that uses it).
The driver class and main entry point for the driver is com.filemaker.jdbc.Driver
Important The JDBC client driver replaces the FileMaker JDBC driver released with a previous version of FileMaker. If you have previously set up access to a FileMaker data source using the older driver, you’ll need to redefine access by using and configuring the new driver.
Note To confirm that the FileMaker XDBC Listener is currently running, you can use the Activity
Monitor on macOS or the Task Manager in Windows to check the status of the FileMaker XDBC
Listener process. When the process is started, it is named fmxdbc_listener, and events are logged by that name. The FileMaker XDBC Listener process is separate from the FileMaker Server process. You can use the FileMaker Server Admin Console to stop and start the XDBC Listener process. On the FileMaker Server Status pane, set ODBC/JDBC to OFF to stop the XDBC Listener and set ODBC/JDBC to ON to start the XDBC Listener.
Using a JDBC URL to connect to your database
In Java, most resources are accessed through URLs. A JDBC URL is used to identify the database so the JDBC client driver can recognize and establish a connection with the database.
The JDBC URL consists of three main parts separated by colons: jdbc:<subprotocol>:<subname>
The first part in the JDBC URL is always the JDBC protocol ( jdbc
). The subprotocol is the driver name or the mechanism that supports multiple drivers. For the JDBC client driver, the subprotocol is filemaker
. The subname is the IP address of the machine that is hosting the
FileMaker data source.
Registering the JDBC client driver and connecting to a FileMaker data source (an example)
Here is a portion of a JDBC client application that:
1. registers the JDBC client driver with the JDBC driver manager
2. establishes a connection with the FileMaker data source; the JDBC URL is jdbc:filemaker://192.168.1.1/database
3. returns error codes
Chapter 6 | Using JDBC to share FileMaker data
Example import java.sql.*; class FMPJDBCTest
{ public static void main(String[ ] args)
{
// register the JDBC client driver try {
Driver d =
(Driver)Class.forName("com.filemaker.jdbc.Driver").newInstance();
} catch(Exception e) {
System.out.println(e);
}
// establish a connection to FileMaker
Connection con; try { con =
DriverManager.getConnection(“jdbc:filemaker://192.168.1.1/myda tabase”,”username”, “password”);
} catch(Exception e) {
System.out.println(e);
}
// get connection warnings
SQLWarning warning = null; try { warning = con.getWarnings(); if (warning == null) {
System.out.println("No warnings"); return;
} while (warning != null) {
System.out.println("Warning: "+warning); warning = warning.getNextWarning();
}
} catch (Exception e) {
Sysem.out.println(e);
}
}
}
Note This example is not meant to be compiled.
26
Chapter 6 | Using JDBC to share FileMaker data 27
Specifying driver properties in the URL subname
Specify the user and password driver properties in the subname of the JDBC URL. These are the properties that could be passed to the connection when calling the DriverManager.getConnection method via the Properties parameter.
1 user: An account in the FileMaker database file that uses a privilege set with the fmxdbc extended privilege for access via ODBC/JDBC
1 password: The password for the account in the FileMaker database file
JDBC URL connection with the database name specified in the URL
Format: jdbc:filemaker://<filemaker host IP address>/<databasename>
Example jdbc:filemaker://192.168.1.1/publications
JDBC URL connection with the database name, user name, and password specified in the URL
Format: jdbc:filemaker://<filemaker host IP address>/<databasename>?user=<databaseusername>&password=<databasepassword>
Example jdbc:filemaker://192.168.1.1/customers?user=Collections&password=admin
Note Because the ampersand character (&) is reserved for use in this syntax, you cannot use an ampersand character in the user name or the password.
Examples
Invalid user name: jdbc:filemaker://localhost/sales_db?user=ad&min&password=admin
Invalid password: jdbc:filemaker://localhost/sales_db?user=admin1&password=ad&min
Solutions with multiple FileMaker database files
If your FileMaker database solution uses many FileMaker database files, create an additional database file that contains all the necessary external data source references, table occurrences, and relationships for your solution. Then define this additional database file as your data source in the JDBC URL. All of the FileMaker database files must be on the same computer.
Chapter 6 | Using JDBC to share FileMaker data 28
Verifying access via JDBC
Note The sample file FMServer_Sample cannot be used to test JDBC connections. To test
JDBC connections, upload your own database.
When verifying access to a FileMaker database file via JDBC, make sure:
1 the FileMaker database file is hosted and available
1 your FileMaker account uses a privilege set with the fmxdbc extended privilege for access via
ODBC/JDBC
1 The FileMaker Server or FileMaker Pro host application has been set up for sharing via
ODBC/JDBC
To share a FileMaker database file as a data source, use FileMaker Pro to define accounts that need access to the database file. Then, control access to the database file by assigning privilege sets to the accounts, including the fmxdbc extended privilege for access via
ODBC/JDBC. Finally, enable the FileMaker Server or FileMaker Pro host application to share data via ODBC/JDBC. For details, see FileMaker Pro Help or FileMaker Server Help .
1 The JDBC client driver registration and the JDBC URL are correct (the driver can be included inside the Java Application or located on the client machine)
Chapter 7
Reference information
ODBC Catalog functions
The ODBC client driver supports the following Catalog functions:
1 SQLTables—catalog information is stored and reported as single part names (table name only)
1 SQLColumns
1 SQLColumnPrivileges
1 SQLDescribeCol
1 SQLGetTypeInfo
JDBC DatabaseMetaData methods
The JDBC client driver supports the following DatabaseMetaData methods:
1 getColumns
1 getColumnPrivileges
1 getMetaData
1 getTypeInfo
1
1
1 getTables getTableTypes getVersionColumns
Mapping FileMaker fields to ODBC data types
This table illustrates how FileMaker field types map to the standard ODBC data types.
FileMaker field type Converts to ODBC data type About the data type text
SQL_VARCHAR
The maximum column length of text is 1 million characters, unless you specify a smaller Maximum number of characters for the text field in FileMaker. FileMaker returns empty strings as NULL .
number
SQL_DOUBLE
The FileMaker number field type can contain positive or negatives values as small as 10
-308
, and as large as 10
+308
, with up to 15 significant digits.
date time
SQL_DATE
SQL_TIME
The FileMaker time field type can contain the time of day or a time interval. A time interval is returned as a time of day, unless it is less than 0 or greater than 24 hours (both return a value of 0 ).
timestamp container (BLOB)
SQL_TIMESTAMP
SQL_LONGVARBINARY calculation
You can retrieve binary data, file reference information, or data of a specific file type from a container field.
Within a SELECT statement, use the CAST() function to retrieve file reference information, and use the GetAs() function to retrieve data of a specific file type.
The result is mapped to the corresponding ODBC data type.
Chapter 7 | Reference information
String length is optional in table declarations. All strings are stored and retrieved in Unicode.
Note FileMaker repeating fields are supported like arrays.
Example
INSERT INTO mytable(repField[3]) VALUES (‘this is rep 3’)
SELECT repField[1], repField[2] FROM mytable
Mapping FileMaker fields to JDBC data types
The JDBC client driver uses the following mappings when converting FileMaker data types to
JDBC SQL types.
FileMaker field type text number date time timestamp container calculation
Converts to JDBC SQL type java.sql.Types.VARCHAR
java.sql.Types.DOUBLE
java.sql.Types.DATE
java.sql.Types.TIME
java.sql.Types.TIMESTAMP
java.sql.Types.BLOB
specified by the data type of the calculation’s result
30
The JDBC client driver converts the FileMaker calculation data type to the JDBC SQL type matching the calculation’s result. For example, the JDBC client driver converts a FileMaker calculation that results in a timestamp data type to java.sql.Types.TIMESTAMP.
Data types in 64-bit applications
In the 32-bit version of the ODBC API, some functions used parameters that could pass integer values or pointer values, depending on context. But in 64-bit Windows operating systems, integers and pointers are not the same size. The 64-bit version of the ODBC API uses abstract data types that are not defined as a specific size.
Applications that use 32-bit values may crash when they are ported to a 64-bit operating system.
Applications that use abstract data types work correctly on both 32-bit and 64-bit operating systems.
ODBC and JDBC error messages
Here are the basic formats of error messages you receive when working with FileMaker and
ODBC/JDBC.
ODBC error messages
Error messages can come from:
1 ODBC driver errors
1 FileMaker and FileMaker XDBC Listener errors
Chapter 7 | Reference information 31
FileMaker ODBC error messages
An error that occurs in the FileMaker Listener or data source includes the DSN, in the following format:
[FileMaker] [FileMaker ODBC] message
Example
[FileMaker] [FileMaker ODBC] Invalid Username/Password
If you get this type of error, you did something incorrectly with the database system. Check your
FileMaker documentation for more information or consult your database administrator.
Consecutive messages for errors in different columns can sometimes display an incorrect column name.
JDBC error messages
The FileMaker JDBC driver reports errors to the calling application by returning SQLExceptions.
Error messages can come from:
1 JDBC driver errors
1 FileMaker and FileMaker XDBC Listener errors
FileMaker JDBC error messages
An error that occurs in the FileMaker Listener or data source includes the DSN, in the following format:
[FileMaker] [FileMaker JDBC] message
Example
[FileMaker] [FileMaker JDBC] Invalid Username/Password
If you get this type of error, you did something incorrectly with the database system. Check your
FileMaker documentation for more information or consult your database administrator.
Index
Numerics
32-bit
ODBC administrator (Windows) 13
64-bit
ODBC administrator (Windows) 13
A
Access via ODBC/JDBC extended privilege 19 accounts and privileges 19
B
C
CAST function 29 catalog function 29
client application, using FileMaker as 5
configuring a FileMaker data source
container field
D data source
configuring for access for JDBC 27
configuring for access via ODBC (macOS) 21
configuring for access via ODBC (Windows) 20
disabling a shared FileMaker database file 7
one DSN for each FileMaker database file 8
verifying access via ODBC (macOS) 21
verifying access via ODBC (Windows) 20
data type mapping
disabling a shared FileMaker database file 7
driver properties
ODBC client driver (Windows) 20
drivers, compatible versions 8
DSNs
E
external SQL data sources
F fields
FileMaker ODBC client driver
FileMaker Server documentation 5
files
setting up access to 19 fmxdbc extended privilege 19
G
H
Index
I
Import Records script step 9 ,
installation requirements 12 ,
J
JDBC
client driver, described 24 described 24
JDBC client driver
driver class and main entry point 25
registering with the JDBC driver manager 25 specifying the JDBC URL 25
M macOS
JDBC client driver requirements 22
mapping data types
ODBC client driver 29 metadata methods 29
N
O
ODBC
error messages 30 repeating fields 30
ODBC client driver
ODBC Data Source Administrator
ODBC Manager
creating a DSN 16 downloading 16
P password
port 2399
required for ODBC (Windows) 13
R
Rapid Application Development (RAD) tools 24
REF data type 25 registering the JDBC client driver 25
required ports
requirements for installation 12
runtime solutions, limitations 10
S
setting up privileges and sharing 19 sharing, setting up ODBC/JDBC 19
,
system requirements
33
Index
T
testing access
ODBC client driver (Windows) 20
U
URL (Uniform Resource Locator) for the JDBC client driver 25
using ODBC and JDBC with FileMaker 5
V
verifying access
ODBC client driver (Windows) 20
W
websites, FileMaker support pages 5
Windows
JDBC client driver requirements 22
X
XDBC Listener
34
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 Chapter 1 Introduction
- 5 About this guide
- 5 Where to find FileMaker documentation
- 6 About ODBC and JDBC
- 6 Using FileMaker software as an ODBC client application
- 6 Importing ODBC data
- 6 Adding ODBC tables to the relationships graph
- 7 Using a FileMaker database as a data source
- 7 Accessing a hosted FileMaker Pro database
- 7 Limitations with third-party tools
- 8 Networking requirements
- 8 Updating files from previous versions
- 9 Chapter 2 Accessing external SQL data sources
- 9 Importing ODBC data
- 10 Executing SQL to interact with data sources via ODBC
- 11 Working with ODBC tables in the relationships graph
- 11 Data sources supported in FileMaker 16
- 11 Adding ODBC tables to the relationships graph
- 12 Chapter 3 Installing FileMaker ODBC client drivers
- 12 Hardware and software requirements
- 12 Networking requirements
- 12 ODBC client driver architecture overview (Windows)
- 12 ODBC client driver installation (Windows)
- 13 Configuring client drivers (Windows)
- 13 Opening the ODBC administrator (Windows)
- 14 Configuring the DSN (Windows)
- 15 ODBC client driver installation (macOS)
- 16 Configuring client drivers (macOS)
- 17 Where to go from here
- 18 Chapter 4 Using ODBC to share FileMaker data
- 18 About ODBC
- 19 Using the ODBC client driver
- 19 Overview of accessing a FileMaker database file
- 20 Accessing a FileMaker database file from a Windows application
- 20 Specifying ODBC client driver properties for a FileMaker DSN (Windows)
- 20 Verifying access via ODBC (Windows)
- 21 Accessing a FileMaker database file from a macOS application
- 21 Specifying ODBC client driver properties for a FileMaker DSN (macOS)
- 21 Verifying access via ODBC (macOS)
- 22 Chapter 5 Installing FileMaker JDBC client drivers
- 22 Software requirements
- 22 Networking requirements
- 22 JDBC client driver installation
- 23 Using the JDBC client driver
- 24 Chapter 6 Using JDBC to share FileMaker data
- 24 About JDBC
- 24 Using the JDBC client driver
- 24 About the JDBC client driver
- 25 Using a JDBC URL to connect to your database
- 27 Specifying driver properties in the URL subname
- 27 Solutions with multiple FileMaker database files
- 28 Verifying access via JDBC
- 29 Chapter 7 Reference information
- 29 ODBC Catalog functions
- 29 JDBC DatabaseMetaData methods
- 29 Mapping FileMaker fields to ODBC data types
- 30 Mapping FileMaker fields to JDBC data types
- 30 Data types in 64-bit applications
- 30 ODBC and JDBC error messages
- 30 ODBC error messages
- 31 JDBC error messages
- 32 Index