LANCOM 1781VA

High-performance VPN router with integrated VDSL and ADSL2+ modem

1 Versatile and professional router high-speed Internet due to VDSL2 and ADSL2+ modem

1 Support of hardware routing for Gigabit-speed performance

1 Secure site connectivity with 5 simultaneous IPSec VPN channels (25 channels optional)

1

Network virtualization with up to 16 virtual networks on one device (ARF)

1 LANCOM security with integrated stateful-inspection firewall and optional Content Filter

1 VDSL2 Vectoring support for fast VDSL connections with up to 100 Mbps

The LANCOM 1781VA is a professional, high-performance VPN router for high-speed Internet access with integrated VDSL2 and ADSL2+ modem. Thus it provides maximum flexibility for a transition from ADSL to high-speed VDSL Internet connections. Likewise, an operation without splitter is possible based on ADSL2+ Annex B / J (over ISDN) or A / M (over POTS). In all industries and branches of trade with high demands on security and performance it is the ideal foundation for a professional site connectivity.

With its extensive VPN capabilities, the device provides secure, high-performance connectivity to branch offices and remote workers. The four ports of the integrated Gigabit

Ethernet switch ensure maximum performance and are also energy-efficient based on IEEE 802.3az: If no data is transmitted over an interface, its power consumption shuts down automatically. The LANCOM 1781VA supplies everything required of a modern enterprise network, such as comprehensive Quality-of-Service capabilities and an object-oriented firewall.

More performance.

The LANCOM 1781VA provides a high-performance platform with hardware NAT for Gigabit-speed during IP packet transmission. As a professional business router, the device meets with high standards in the areas of network virtualization, security, and VPN networking. With a VPN encryption performance of more than 200 Mbps, remote sites can be easily connected. At the same time, its computing power, storage capacity, and the high-speed interfaces ensure excellent network performance even at times of heavy data traffic. And even more: The LANCOM 1781VA supports VDSL2-Vectoring for the new VSDL generation with a doubled data rate.

More security.

The LANCOM 1781VA is ideal for offices or small businesses with high data volumes that want to set up a secure and powerful VPN: The router's VPN gateway supports five simultaneous IPSec channels, to be upgraded up to 25 channels optionally. Additionally, an object-oriented stateful-inspection firewall protects the network with intrusion prevention and denial of service protection. Optionally available, the LANCOM Content Filter protects up to 100 users effectively while using the Internet. Flexible bandwidth management guarantees the availability of all applications (also in local networks) as these can be prioritized with a comprehensive range of Quality-of-Service features.

More management.

LCMS, the LANCOM Management System, is a free software package for the LANCOM 1781VA. It enables the configuration of the device, remote maintenance, and network monitoring. The central component of LCMS, LANconfig, is used to configure the LANCOM 1781VA and other LANCOM devices on the network. The extensive range of features and the configuration wizards enable a quick setup of the router. LANCOM Large Scale Monitor (LSM) and the free-of-charge LANmonitor offer detailed, real-time monitoring of parameters, access to log files and statistics, as well as detailed trace-protocol analysis. Other functions in LCMS include the GUI for firewall setup, automatic backup of configurations and scripts, and the intuitive folder structure with a convenient search function.

More virtualization.

The LANCOM 1781VA helps you to use your IT resources more effectively and to save costs. The device supports multiple independent networks with the powerful technology

Advanced Routing and Forwarding (ARF). The ARF function on the LANCOM 1781VA provides up to sixteen virtual networks, each with its own settings for DHCP, DNS, routing, and firewall.

More reliability for the future.

With the LANCOM 1781VA corporate networks can be upgraded for the use of the Internet protocol IPv6 using their current infrastructure. Due to the implementation of dual-stack, the router can be operated in pure IPv4, pure IPv6, or mixed networks. On top of that, several times a year free-of-charge updates for the LANCOM Operating

System (LCOS) are available. Hence, LANCOM offers maximum safeguarding of your investment.

LANCOM 1781VA

Firewall

Stateful inspection firewall

Packet filter

Extended port forwarding

N:N IP address mapping

Tagging

Actions

Notification

Quality of Service

Traffic shaping

Bandwidth reservation

DiffServ/TOS

Packet-size control

Layer 2/Layer 3 tagging

Security

Intrusion Prevention

IP spoofing

Access control lists

Denial of Service protection

General

URL blocker

Password protection

Alerts

Authentication mechanisms

Anti-theft

Adjustable reset button

High availability / redundancy

VRRP

FirmSafe

UMTS backup*

ISDN backup

Analog/GSM modem backup

Load balancing

VPN redundancy

Line monitoring

*) Note:

Features as of: LCOS 8.84

Incoming/Outgoing Traffic inspection based on connection information. Trigger for firewall rules depending on backup status, e.g. simplified rule sets for low-bandwidth backup lines. Limitation of the number of sessions per remote site (ID)

Check based on the header information of an IP packet (IP or MAC source/destination addresses; source/destination ports, DiffServ attribute); remote-site dependant, direction dependant, bandwidth dependant

Network Address Translation (NAT) based on protocol and WAN address, i.e. to make internal webservers accessible from WAN

N:N IP address mapping for translation of IP addresses or entire networks

The firewall marks packets with routing tags, e.g. for policy-based routing; Source routing tags for the creation of independent firewall rules for different ARF contexts

Forward, drop, reject, block sender address, close destination port, disconnect

Via e-mail, SYSLOG or SNMP trap

Dynamic bandwidth management with IP traffic shaping

Dynamic reservation of minimum and maximum bandwidths, totally or connection based, separate settings for send and receive directions. Setting relative bandwidth limits for QoS in percent

Priority queuing of packets based on DiffServ/TOS fields

Automatic packet-size control by fragmentation or Path Maximum Transmission Unit (PMTU) adjustment

Automatic or fixed translation of layer-2 priority information (IEEE 802.11p-marked Ethernet frames) to layer-3 DiffServ attributes in routing mode.

Translation from layer 3 to layer 2 with automatic recognition of IEEE 802.11p-support in the destination device

Monitoring and blocking of login attempts and port scans

Source IP address check on all interfaces: only IP addresses belonging to the defined IP networks are allowed

Filtering of IP or MAC addresses and preset protocols for configuration access and LANCAPI

Protection from fragmentation errors and SYN flooding

Detailed settings for handling reassembly, PING, stealth mode and AUTH port

Filtering of unwanted URLs based on DNS hitlists and wildcard filters. Extended functionality with Content Filter Option

Password-protected configuration access can be set for each interface

Alerts via e-mail, SNMP-Traps and SYSLOG

PAP, CHAP, MS-CHAP and MS-CHAPv2 as PPP authentication mechanism

Anti-theft ISDN site verification over B or D channel (self-initiated call back and blocking)

Adjustable reset button for 'ignore', 'boot-only' and 'reset-or-boot'

VRRP (Virtual Router Redundancy Protocol) for backup in case of failure of a device or remote station. Enables passive standby groups or reciprocal backup between multiple active devices including load balancing and user definable backup priorities

For completely safe software upgrades thanks to two stored firmware versions, incl. test mode for firmware updates

Operation of an external UMTS/HSDPA USB card at the USB host port

In case of failure of the main connection, a backup connection is established over ISDN. Automatic return to the main connection

Optional operation of an analog or GSM modem at the serial interface

Static and dynamic load balancing over up to 4 WAN connections. Channel bundling with Multilink PPP (if supported by network operator)

Backup of VPN connections across different hierarchy levels, e.g. in case of failure of a central VPN concentrator and re-routing to multiple distributed remote sites. Any number of VPN remote sites can be defined (the tunnel limit applies only to active connections). Up to 32 alternative remote stations, each with its own routing tag, can be defined per VPN connection. Automatic selection may be sequential, or dependant on the last connection, or random (VPN load balancing)

Line monitoring with LCP echo monitoring, dead-peer detection and up to 4 addresses for end-to-end monitoring with ICMP polling

A UMTS USB modem is not supplied. Supported UMTS USB modem at www.lancom.eu/umts-support

LANCOM 1781VA

Features as of: LCOS 8.84

VPN

IPSec over HTTPS

Number of VPN tunnels

Hardware accelerator

Realtime clock

Random number generator

1-Click-VPN Client assistant

1-Click-VPN Site-to-Site

IKE

Certificates

Certificate rollout

Certificate revocation lists (CRL)

OCSP Client

XAUTH

RAS user template

Proadaptive VPN

Algorithms

Hardware NAT

NAT-Traversal

IPCOMP

LANCOM Dynamic VPN

Dynamic DNS

Specific DNS forwarding

Enables IPsec VPN based on TCP (at port 443 like HTTPS) which can go through firewalls in networks where e. g. port 500 for IKE is blocked. Suitable for client-to-site connections (with LANCOM Advanced VPN Client 2.22 or later) and site-to-site connections (LANCOM VPN gateways or routers with LCOS 8.0 or later). IPSec over HTTPS is based on the NCP VPN Path Finder technology

Max. number of concurrent active IPSec and PPTP tunnels (MPPE): 5 (25 with VPN 25 Option). Unlimited configurable connections. Configuration of all remote sites via one configuration entry when using the RAS user template or Proadaptive VPN.

Integrated hardware accelerator for 3DES/AES encryption and decryption

Integrated, buffered realtime clock to save the date and time during power failure. Assures timely validation of certificates in any case

Generates real random numbers in hardware, e. g. for improved key generation for certificates immediately after switching-on

One click function in LANconfig to create VPN client connections, incl. automatic profile creation for the LANCOM Advanced VPN Client

Creation of VPN connections between LANCOM routers via drag and drop in LANconfig

IPSec key exchange with Preshared Key or certificate

X.509 digital multi-level certificate support, compatible with Microsoft Server / Enterprise Server and OpenSSL, upload of PKCS#12 files via HTTPS interface and LANconfig. Simultaneous support of multiple certification authorities with the management of up to nine parallel certificate hierarchies as containers (VPN-1 to VPN-9). Simplified addressing of individual certificates by the hierarchy's container name (VPN-1 to VPN-9). Wildcards for certificate checks of parts of the identity in the subject. Secure Key Storage protects a private key (PKCS#12) from theft

Automatic creation, rollout and renewal of certificates via SCEP (Simple Certificate Enrollment Protocol) per certificate hierarchy

CRL retrieval via HTTP per certificate hierarchy

Check X.509 certifications by using OCSP (Online Certificate Status Protocol) in real time as an alternative to CRLs

XAUTH client for registering LANCOM routers and access points at XAUTH servers incl. IKE-config mode. XAUTH server enables clients to register via XAUTH at LANCOM routers. Connection of the XAUTH server to RADIUS servers provides the central authentication of VPN-access with user name and password. Authentication of VPN-client access via XAUTH and RADIUS connection additionally by OTP token

Configuration of all VPN client connections in IKE ConfigMode via a single configuration entry

Automated configuration and dynamic creation of all necessary VPN and routing entries based on a default entry for site-to-site connections.

Propagation of dynamically learned routes via RIPv2 if required

3DES (168 bit), AES (128, 192 or 256 bit), Blowfish (128 bit), RSA (1024-4096 bit) and CAST (128 bit). OpenSSL implementation with FIPS-140 certified algorithms. MD-5 or SHA-1 hashes

Wirespeed NAT performance through hardware support (offloading) for plain IP connections (incl. DHCP) where source and destination addresses are not withn the same /20 network.

NAT-Traversal (NAT-T) support for VPN over routes without VPN passthrough

VPN data compression based on Deflate compression for higher IPSec throughput on low-bandwidth connections (must be supported by remote endpoint)

Enables VPN connections from or to dynamic IP addresses. The IP address is communicated via ISDN B- or D-channel or with the ICMP or UDP protocol in encrypted form. Dynamic dial-in for remote sites via connection template

Enables the registration of IP addresses with a Dynamic DNS provider in the case that fixed IP addresses are not used for the VPN connection

DNS forwarding according to DNS domain, e.g. internal names are translated by proprietary DNS servers in the VPN. External names are translated by Internet DNS servers

Enables the use of IPv4 VPN over IPv6 WAN connections IPv4 VPN over IPv6 WAN

VPN throughput (max., AES)

1418-byte frame size UDP

256-byte frame size UDP

Firewall throughput (max.)

1518-byte frame size UDP

256-byte frame size UDP

Hardware firewall throughput (max.)

HW-NAT TCP

Content Filter (optional)

Demo version

320 Mbps

60 Mbps

560 Mbps

100 Mbps

930 Mbps

Activate the 30-day trial version after free registration under http://www.lancom.eu/routeroptions

LANCOM 1781VA

Features as of: LCOS 8.84

Content Filter (optional)

URL filter database/rating server

HTTPS filter

Categories/category profiles

Override

Black-/whitelist

Profiles

Time frames

Flexible firewall action

Individual display pages (for blocked, error, override)

Activation of the content filter by selecting the required firewall profile that contains content-filter actions. Firewall rules enable the flexible use of your own profiles for different clients, networks or connections to certain servers

Response pages displayed by the content filter in case of blocked sites, errors or overrides can be custom designed. Variables enable the inclusion of current information such as the category, URL, and rating-server categorization. Response pages can be issued in any language depending on the language set in the user's web browser

Redirection to external pages

License management

As an alternative to displaying the device's own internal response pages to blockings, errors or overrides, you can redirect to external web servers

Automatic notification of license expiry by e-mail, LANmonitor, SYSLOG or SNMP trap. Activation of license renewal at any time before expiry of the current license (the new licensing period starts immediately after expiry of the current license)

Statistics

Notifications

Wizard for typical configurations

Display of the number of checked and blocked web pages by category in LANmonitor. Logging of all content-filter events in LANmonitor; log file created daily, weekly or monthly. Hit list of the most frequently called pages and rating results. Analysis of the connection properties; minimum, maximum and average rating-server response time

Messaging in case of content-filter events optionally by e-mail, SNMP, SYSLOG or LANmonitor

Wizard sets up the content filters for a range of typical scenarios in a few simple steps, including the creation of the necessary firewall rules with the corresponding action

Simultaneous checking of HTTP traffic for a maximum of 100 different IP addresses in the LAN Max. users

VoIP

SIP ALG The SIP ALG (Application Layer Gateway) acts as a proxy for SIP communication. For SIP calls the ALG opens the necessary ports on the firewall for the corresponding media packets. By using automatic address translation for devices inside the LAN, the use of STUN is no longer needed.

Routing functions

Router

Advanced Routing and Forwarding

Worldwide, redundant rating servers from IBM Security Solutions for querying URL classifications. Database with over 100 million entries covering about 10 billion web pages. Web crawlers automatically search and classify web sites to provide nearly 150,000 updates per day: They use text classification by optical character recognition, key word searches, classification by word frequency and combinations, web-site comparison of text, images and page elements, object recognition of special characters, symbols, trademarks and prohibited images, recognition of pornography and nudity by analyzing the concentration of skin tones in images, by structure and link analysis, by malware detection in binary files and installation packages

Additional filtering of HTTPS requests with separate firewall entries

Filter rules can be defined in each profile by collecting category profiles from 58 categories, for example to restrict Internet access to business purposes only (limiting private use) or by providing protection from content that is harmful to minors or hazardous content (e.g. malware sites).

Clearly structured selection due to the grouping of similar categories. Content for each category can be allowed, blocked, or released by override

Each category can be given an optional manual override that allows the user to access blocked content on a case-by-case basis. The override operates for a limited time period by allowing the category or domain, or a combination of both. Optional notification of the administrator in case of overrides

Lists that are manually configured to explicitly allow (whitelist) or block (blacklist) web sites for each profile, independent of the rating server.

Wildcards can be used when defining groups of pages or for filtering sub pages

Timeframes, blacklists, whitelists and categories are collected into profiles that can be activated separately for content-filter actions. A default profile with standard settings blocks racist, pornographic, criminal, and extremist content as well as anonymous proxies, weapons/military, drugs,

SPAM and malware

Timeframes can be flexibly defined for control over filtering depending on the time of day or weekday, e.g. to relax controls during break times for private surfing

HTTP

DNS

DHCP

NetBIOS

NTP

Policy-based routing

IP and NetBIOS/IP multi-protocol router

Separate processing of 16 contexts due to virtualization of the routers. Mapping to VLANs and complete independent management and configuration of IP networks in the device, i.e. individual settings for DHCP, DNS, Firewalling, QoS, VLAN, Routing etc. Automatic learning of routing tags for

ARF contexts from the routing table

HTTP and HTTPS server for configuration by web interface

DNS client, DNS server, DNS relay, DNS proxy and dynamic DNS client

DHCP client, DHCP relay and DHCP server with autodetection. Cluster of several LANCOM DHCP servers per context (ARF network) enables caching of all DNS assignments at each router. DHCP forwarding to multiple (redundant) DHCP servers

NetBIOS/IP proxy

NTP client and SNTP server, automatic adjustment for daylight-saving time

Policy-based routing based on routing tags. Based on firewall rules, certain data types are marked for specific routing, e.g. to particular remote sites or lines

LANCOM 1781VA

Features as of: LCOS 8.84

Routing functions

Dynamic routing

DHCPv6

Layer 2 functions

VLAN

ARP lookup

LLDP

COM port server

COM port forwarding

USB print server

Print server (USB 2.0)

LAN protocols

IP

IPv6

IPv6

Dual Stack

IPv6 compatible LCOS applications

WAN protocols

VDSL, ADSL, Ethernet

ISDN

IPv6

Tunneling protocols (IPv4/IPv6)

WAN operating mode

VDSL xDSL xDSL (ext. modem)

UMTS/HSDPA* (ext. module)

ISDN

Analog/GPRS (ext. modem)

*) Note:

Dynamic routing with RIPv2. Learning and propagating routes; separate settings for LAN and WAN. Extended RIPv2 including HopCount, Poisoned

Reverse, Triggered Update for LAN (acc. to RFC 2453) and WAN (acc. to RFC 2091) as well as filter options for propagation of routes. Definition of RIP sources with wildcards

DHCPv6 client, DHCPv6 server, DHCPv6 relay, stateless- and stateful mode, IPv6 address (IA_NA), prefix delegation (IA_PD), DHCPv6 reconfigure

(server and client)

VLAN ID definable per interface and routing context (4,094 IDs) IEEE 802.1q

Packets sent in response to LCOS service requests (e.g. for Telnet, SSH, SNTP, SMTP, HTTP(S), SNMP, etc.) via Ethernet can be routed directly to the requesting station (default) or to a target determined by ARP lookup

Automatic discovery of network topology in layer 2 networks (Link Layer Discover Protocol)

COM-port server for DIN and USB interfaces. For multiple serial devices connected to it, the server also manages its own virtual COM ports via

Telnet (RFC 2217) for remote maintenance (works with popular virtual COM-port drivers compliant with RFC 2217). Switchable newline conversion and alternative binary mode. TCP keepalive according to RFC 1122 with configurable keepalive interval, retransmission timeout and retries

Host port for connecting USB printers via RAW-IP and LPD; bi-directional data exchange is possible

ARP, proxy ARP, BOOTP, LANCAPI, DHCP, DNS, HTTP, HTTPS, IP, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RIP-1, RIP-2, RTP, SIP, SNMP,

TCP, TFTP, UDP, VRRP

NDP, stateless address autoconfiguration (SLAAC), stateful address autoconfiguration (with DHCPv6), router advertisements, ICMPv6, DHCPv6,

DNS, HTTP, HTTPS, PPPoE, TCP, UDP

IPv4/IPv6 dual stack

WEBconfig, HTTP, HTTPS, SSH, Telnet, DNS, TFTP, Firewall

PPPoE, PPPoA, IPoA, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-1, RIP-2, VLAN

1TR6, DSS1 (Euro-ISDN), PPP, X75, HDLC, ML-PPP, V.110/GSM/HSCSD

IPv6 over PPP (IPv6 and IPv4/IPv6 dual stack session), IPoE (autoconfiguration, DHCPv6 or static)

6to4, 6in4, 6rd (static and via DHCP)

VDSL2 with internal modem

ADSL1, ADSL2 or ADSL2+ with internal ADSL2+ modem

ADSL1, ADSL2 or ADSL2+ with external ADSL2+ modem

UMTS/HSDPA with external module at the USB interface

ISDN data or voice usage via internal ISDN interface

Analog or GPRS operation via serial interface

A UMTS USB modem is not supplied. Supported UMTS USB modems at www.lancom.eu/umts-support

LANCOM 1781VA

Features as of: LCOS 8.84

Interfaces

WAN: VDSL 1 VDSL2 compliant with ITU G.993.2, profiles 8a, 8b, 8c, 8d, 12a, 12b, 17a

1 VDSL2 vectoring: VDSL2 vectoring reduces crosstalk of cable bundles to increase the VDSL bandwidth (as of LCOS 8.84 RU2 for over ISDN devices and with later firmware for over POTS devices)

1 Compliant to: ADSL2+ over ISDN as per ITU G.992.5 Annex B with DPBO, ADSL2 over ISDN as per ITU G.992.3/5 Annex B/J, ADSL over ISDN as per ITU G.992.1 Annex B (EU, over ISDN)

1 Compliant to: ADSL2+ over POTS as per ITU G.992.5 Annex A/Annex M with DPBO, ADSL2 over POTS as per ITU G.992.3 Annex A/L, ADSL over

POTS as per ITU.G.992.1 Annex A (UK, over POTS / EU, over POTS)

1 Supports one virtual ATM circuit (VPI, VCI pair) at a time

1 For operation without splitter please use the DSL cable supllied by your Internet provider

WAN: Ethernet

Ethernet ports

Port configuration

USB 2.0 host port

ISDN

Serial interface

10/100/1000 Mbps Gigabit Ethernet

4 individual 10/100/1000 Mbps Ethernet ports; up to 3 ports can be operated as additional WAN ports with load balancing. Ethernet ports can be electrically disabled within LCOS configuration. The ports support energy saving according to IEEE 802.3az

Each Ethernet port can be freely configured (LAN, DMZ, WAN, monitor port, off). LAN ports can be operated as a switch or separately. Additionally, external DSL modems or termination routers can be operated as a WAN port with load balancing and policy-based routing. DMZ ports can be operated with their own IP address range without NAT

USB 2.0 hi-speed host port for connecting USB printers (USB print server), serial devices (COM port server), USB data storage (FAT file system) or supported 3G USB modems; bi-directional data exchange is possible*

ISDN BRI port (S0 bus)

Serial configuration interface / COM port (8 pin Mini-DIN): 9,600 - 115,000 baud, suitable for optional connection of analog/GPRS modems. Supports internal COM port server and allows for transparent asynchronous transmission of serial data via TCP

A UMTS USB modem is not supplied. Supported UMTS USB modems at www.lancom.eu/umts-support *) Note

LCMS (LANCOM Management System)

LANconfig

LANmonitor

Firewall GUI

Automatic software update

Configuration program for Microsoft Windows, incl. convenient Setup Wizards. Optional group configuration, simultaneous remote configuration and management of multiple devices over ISDN dial-in or IP connection (HTTPS, HTTP, TFTP). A tree view of the setting pages like in WEBconfig provides quick access to all settings in the configuration window. Password fields which optionally display the password in plain text and can generate complex passwords. Configuration program properties per project or user. Automatic storage of the current configuration before firmware updates. Exchange of configuration files between similar devices, e.g. for migrating existing configurations to new LANCOM products. Detection and display of the LANCOM managed switches. Extensive application help for LANconfig and parameter help for device configuration. LANCOM

QuickFinder as search filter within LANconfig and device configurations that reduces the view to devices with matching properties

Monitoring application for Microsoft Windows for (remote) surveillance and logging of the status of LANCOM devices and connections, incl. PING diagnosis and TRACE with filters and save to file. Search function within TRACE tasks. Wizards for standard diagnostics. Export of diagnostic files for support purposes (including bootlog, sysinfo and device configuration without passwords). Graphic display of key values (marked with an icon in LANmonitor view) over time as well as table for minimum, maximum and average in a separate window, e. g. for Rx, Tx, CPU load, free memory.

Monitoring of the LANCOM managed switches. Flick easily through different search results by LANCOM QuickFinder

Graphical user interface for configuring the object-oriented firewall in LANconfig: Tabular presentation with symbols for rapid understanding of objects, choice of symbols for objects, objects for actions/Quality of Service/remote sites/services, default objects for common scenarios, individual object definition (e.g. for user groups)

Voluntary automatic updates for LCMS. Search online for LCOS updates for devices managed by LANconfig on the myLANCOM download server

(myLANCOM account mandatory). Updates can be applied directly after the download or at a later time

Management

WEBconfig

LANCOM Layer 2 Management (emergency management)

Alternative boot configuration

Automatic update from USB

Device SYSLOG

Integrated web server for the configuration of LANCOM devices via Internet browsers with HTTPS or HTTP. Similar to LANconfig with a system overview, SYSLOG and events display, symbols in the menu tree, quick access with side tabs. WEBconfig also features Wizards for basic configuration, security, Internet access, LAN-LAN coupling. Online help for parameters in LCOS menu tree

The LANCOM Layer 2 Management protocol (LL2M) enables an encrypted access between the command line interfaces of two LANCOM device directly via a Layer 2 connection

During rollout devices can be preset with project- or customer-specific settings. Up to two boot- and reset-persistent memory spaces can store customized configurations for customer-specific standard settings (memory space '1') or as a rollout configuration (memory space '2'). A further option is the storage of a persistent standard certificate for the authentication of connections during rollouts

Automtatic upload of appropriate firmware and configuration files on insertion of USB memory (FAT filesystem) into USB interfaces of LANCOM routers with factory settings. The function can be activated to be used during operation of configured devices. The router checks the files’ dates and versions against the current firmware before upload

SYSLOG buffer in the RAM (size depending on device memory) to store events for diagnosis. Default set of rules for the event protocol in SYSLOG.

The rules can be modified by the administrator. Display and saving of internal SYSLOG buffer (events) from LANCOM devices with LANmonitor, display only with WEBconfig

LANCOM 1781VA

Features as of: LCOS 8.84

Management

Access rights

User administration

Remote maintenance

TACACS+

RADIUS

Remote maintenance of 3rd party devices

ISDN remote maintenance

TFTP & HTTP(S) client

SSH & Telnet client

Basic HTTP(S) file server

HTTPS Server

Security

Scripting

Load commands

SNMP

Timed control

Diagnosis

LANCAPI

CAPI Faxmodem

Programmable Rollout Wizard

Individual access and function rights for up to 16 administrators. Alternative access control on a per parameter basis with TACACS+

RADIUS user administration for dial-in access (PPP/PPTP and ISDN CLIP). Support for RADSEC (Secure RADIUS) for secure communication with

RADIUS servers. RADIUS authentication can be used to log in to a device. In addition, users can be deactivated in the internal RADIUS server without deleting them

Remote configuration with Telnet/SSL, SSH (with password or public key), browser (HTTP/HTTPS), TFTP or SNMP, firmware upload via HTTP/HTTPS or TFTP

Support of TACACS+ protocol for authentication, authorization and accounting (AAA) with reliable connections and encrypted payload. Authentication and authorization are separated completely. LANCOM access rights are converted to TACACS+ levels. With TACACS+ access can be granted per parameter, path, command or functionality for LANconfig, WEBconfig or Telnet/SSH. Each access and all changes of configuration are logged.

Access verification and logging of SNMP Get and Set requests. WEBconfig supports the access rights of TACACS+ and choice of TACACS+ server at login. LANconfig provides a device login with the TACACS+ request conveyed by the addressed device. Authorization to execute scripts and each command within them by checking the TACACS+ server’s database. CRON, action-table and script processing can be diverted to avoid TACACS+ to relieve TACACS+ servers. Redundancy by setting several alternative TACACS+ servers. Configurable option to fall back to local user accounts in case of connection drops to the TACACS+ servers. Compatibility mode to support several free TACACS+ implementations

Support of RADIUS protocol for authentication of configuration access. Administrative privileges can be assigned for each administrator.

A remote configuration for devices behind der LANCOM can be accomplished (after authentication) via tunneling of arbitrary TCP-based protocols, e.g. for HTTP(S) remote maintenance of VoIP phones or printers of the LAN. Additionally, SSH and Telnet client allow to access other devices from a LANCOM device with an interface to the target subnet if the LANCOM device can be reached at its command line interface

Remote maintenance over ISDN dial-in with calling-number check

For downloading firmware and configuration files from a TFTP, HTTP or HTTPS server with variable file names (wildcards for name, MAC/IP address, serial number), e.g. for roll-out management. Commands for live Telnet session, scripts or CRON jobs. HTTPS Client authentication possible by username and password or by certificate

SSH-client function compatible to Open SSH under Linux and Unix operating systems for accessing third-party components from a LANCOM router.

Also usable when working with SSH to login to the LANCOM device. Support for certificate- and password-based authentication. Generates its own key with sshkeygen. SSH client functions are restricted to administrators with appropriate rights. Telnet client function to login/administer third party devices or other LANCOM devices from command line interface

HTML pages, images and templates for Public Spot pages, vouchers, information pages of the Content Filter can be stored on a USB memory (FAT file system) in a specific folder as an alternative for the limited internal memory

Option to choose if an uploaded certificate or the default certificate is used by the HTTPS server

Access rights (read/write) over WAN or LAN can be set up separately (Telnet/SSL, SSH, SNMP, HTTPS/HTTP), access control list

Scripting function for batch-programming of all command-line parameters and for transferring (partial) configurations, irrespective of software versions and device types, incl. test mode for parameter changes. Utilization of timed control (CRON) or connection establishment and termination to run scripts for automation. Scripts can send e-mails with various command line outputs as attachments

LoadFirmware, LoadConfig and LoadScript can be executed conditionally in case certain requirements are met. For example, the command

LoadFirmware could be executed on a daily basis and check each time if the current firmware is up to date or if a new version is available. In addition, LoadFile allows the upload of files including certificates and secured PKCS#12 containers

SNMP management via SNMPv2, new unified private MIB for all most current and future LANCOM devices with LCOS. Download link in WEBconfig

Scheduled control of parameters and actions with CRON service

Extensive LOG and TRACE options, PING and TRACEROUTE for checking connections, LANmonitor status display, internal logging buffer for SYSLOG and firewall events, monitor mode for Ethernet ports

Available for all LANCOM routers with integrated ISDN interface. LANCAPI provides CAPI 2.0 features for Microsoft Windows to utilize ISDN channels over the IP network

Softmodem for Microsoft Windows that makes use of LANCAPI to send and receive faxes via ISDN

Allows the programming of a customized wizard to simplify the rollout in projects. Support for customized templates and logos provide a way to generate a brand specific look

Statistics

Statistics

Volume budget

Accounting

Export

Extensive Ethernet, IP and DNS statistics; SYSLOG error counter

The used data volume of WAN connections (PPP, IPoE, PPTP, IPSec) can be monitored and different actions can be triggered once certain thresholds are passed

Connection time, online time, transfer volumes per station. Snapshot function for regular read-out of values at the end of a billing period. Timed

(CRON) command to reset all counters at once

Accounting information exportable via LANmonitor and SYSLOG

LANCOM 1781VA

Features as of: LCOS 8.84

Hardware

Weight

Power supply

Environment

Housing

Fans

Power consumption (max)

Declarations of conformity*

CE

IPv6

*) Note

Scope of delivery

Manual

CD/DVD

Cable

Cable

Cable

Power supply unit

1,1 lbs (500 g)

12 V DC, external power adapter (230 V) with bayonet cap to protect against accidentally unplugging

Temperature range 0–40° C; humidity 0–95%; non-condensing

Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; 210 x 45 x 140 mm (W x H x D)

None; fanless design without rotating parts, high MTBF

14 Watts

EN 60950-1, EN 55022, EN 55024

IPv6 Ready Gold

You will find all declarations of conformity in the products section of our website at www.lancom-systems.eu

Hardware Quick Reference (EN, DE), Installation Guide (DE/EN/FR/ES/IT/PT/NL)

Data medium with firmware, management software (LANconfig, LANmonitor, LANCAPI) and documentation

1 Ethernet cable, 3 m

VDSL/ADSL cable, 3m

ISDN cable, 3m

External power adapter (230 V), NEST 12 V/1.5 A DC/S, coaxial power connector 2.1/5.5 mm bayonet, temperature range from -5 to +45° C,

LANCOM item no. 110723 (EU)/LANCOM item no 110829 (UK)

Support

Warranty

Software updates

Options

VPN

LANCOM Content Filter

LANCOM Content Filter

LANCOM Content Filter

LANCOM Content Filter

LANCOM Content Filter

LANCOM Content Filter

Advance Replacement

Warranty Extension

Public Spot

3 years Support via Hotline and Internet KnowledgeBase

Regular free updates (LCOS operating system and LANCOM Management System) via Internet

Fax Gateway

LANCOM Public Spot PMS Accounting Plus

LANCOM WLC Basic Option for Routers

LANCOM WLC AP Upgrade +6

Accessories

19" Rack Mount

LANCOM Wall Mount

LANCOM VPN-25 Option (25 channels), item no. 60083

LANCOM Content Filter +10 user, 1 year subscription

LANCOM Content Filter +25 user, 1 year subscription

LANCOM Content Filter +100 user, 1 year subscription

LANCOM Content Filter +10 user, 3 year subscription

LANCOM Content Filter +25 user, 3 year subscription

LANCOM Content Filter +100 user, 3 year subscription

LANCOM Next Business Day Service Extension CPE, item no. 61411

LANCOM 2-Year Warranty Extension CPE, item no. 61414

LANCOM Public Spot Option (authentication and accounting software for hotspots, incl. Voucher printing through Standard PC printer), item no.

60642

LANCOM Fax Gateway Option activates 'hardfax' within the router. Supports 2 parallel fax channels with LANCAPI ('fax group 3' without use of

CAPI Faxmodem), item no. 61425

Extension of the LANCOM Public Spot (XL) Option for the connection to hotel billing systems with FIAS interface (such as Micros Fidelio) for authentication and billing of guest accesses for 178x routers, WLCs, and current central-site gateways, item no. 61638

LANCOM WLC Basic Option for Routers for up to 6 managed LANCOM access points or WLAN routers, item no. 61639

LANCOM WLC AP Upgrade +6 Option, enables your WLC to manage 6 Access Points/WLAN router in addition, item no. 61629

19" Rackmount-Adapter, Art.-Nr. 61501

For simple, theft-proof mounting of LANCOM devices with plastic housings, item no. 61349

LANCOM 1781VA

Features as of: LCOS 8.84

Accessories

Analog modem backup/serial adapter

VPN Client Software

VPN Client Software

VPN Client Software

VPN Client Software

VPN Client Software

Item number(s)

LANCOM 1781VA (EU, over ISDN)

LANCOM 1781VA (UK, over POTS)

LANCOM 1781VA (EU, over POTS)

LANCOM Serial Adapter Kit, item no. 61500

LANCOM Advanced VPN Client for Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, single license, item no. 61600

LANCOM Advanced VPN Client for Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, 10 licenses, item no. 61601

LANCOM Advanced VPN Client for Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, 25 licenses, item no. 61602

LANCOM Advanced VPN Client for Mac OS X (10.5 Intel only, 10.6 or higher), single license, item no. 61606

LANCOM Advanced VPN Client for Mac OS X (10.5 Intel only, 10.6 or higher), 10 licenses, item no. 61607

62032

62033

62034

www.lancom.eu

LANCOM Systems GmbH I Adenauerstr. 20/B2 I 52146 Wuerselen I Germany I E-Mail [email protected] I Internet www.lancom.eu