stagepas 500 stagepas 300


Add to my manuals
2 Pages

advertisement

stagepas 500 stagepas 300 | Manualzz

STAGEPAS Series

Portable PA Systems

STAGEPAS 500

STAGEPAS 300

* The speaker stand and microphone stand are options.

Great live sound has never been easier.

• This all-in-one system includes a pair of passive speakers, a detachable powered mixer, and a pair of speaker cables.

• Both the 8-channel 150W + 150W STAGEPAS 300 mixer and the 10-channel 250W + 250W STAGEPAS 500 mixer can be used either while installed in the speaker compartment or detached for easy positioning and access.

• Built-in equalization and reverb add the finishing touches to your sound.

• STAGEPAS 500 features phantom power for condenser microphones and channel compression/limiting for added sonic control.

• XLR and phone-jack inputs on mono channels, and phone-jack and RCA pin-jack inputs on stereo channels allow connection to a wide range of sources.

• MIC/LINE switches select microphone or line level input matching for channels 1 through 4.

• The STAGEPAS 300 speakers can be stand mounted using standard speaker stand adaptors such as the ADP138, Ultimate

BMB200, or equivalent. STAGEPAS 500 speaker is directly mountable on 35mm pole with securing thumb screw.

• Auto Limiter prevents overload damage to power amplifier and speakers.

• LED output level meter.

• Optional BMS-10A Mic Stand Adaptor for the mixer unit.

OPTION

BMS10A

Mic Stand Adaptor

The optional BMS-10A Mic

Stand Adaptor makes it easy to mount the mixer on a microphone stand.

STAGEPAS 500

GENERAL SPECIFICATIONS (MIXER)

Output Power (Maximum) 250W+250W(±10%)/4Ω @10% THD at 1kHz (SPEAKERS L/R)

Output Power (RMS) 200W+200W/4 Ω @1% THD at 1kHz (SPEAKERS L/R)

Maximum Output Level

Frequency Response

116dB (1m)

-3dB, 0dB, +1dB @20Hz-20kHz (MUSIC/SPEECH=MUSIC) (MONITOR OUT)

(Nominal output level@1kHz) -3dB, 0dB, +1dB @80Hz-20kHz (MUSIC/SPEECH=SPEECH) (REC OUT)

Total Hamonic Distortion

-3dB, 0dB, +1dB @20Hz-20kHz, 1W OUTPUT (MUSIC/SPEECH=MUSIC, without Speaker EQ) (SPEAKERS L/R)

Less than 0.5% @20Hz, 1kHz, 20kHz +14dBu GAIN=nominal

(MONITOR OUT, REC OUT)

Hum & Noise

(Equivalent Input Noise,

Rs=150 Ω, MIC/LINE = MIC)

Crosstalk (@1kHz)

Phantom power switch

Less than -106dBu (CH1/2)

Less than

Less than

-112dBu (CH3/4)

-65dBu residual output noise (SPEAKERS L/R)

Less than -70dB between input channels

ON / OFF (CH1-4)

COMP/LIMIT switch ON=COMP, OFF=LIMIT (CH1/2)

Input Channel Equalization *1 ±15 dB (MAX)

HIGH: 10kHz shelving

LOW: 100Hz shelving

Power Consumption 65W

Dimentions (W x H x D) 342 x 544.5 x 298mm (13.5" x 21.4" x 11.7") [Speaker x 1]

330 x 175 x 111.5mm (13.0" x 6.9" x 4.4") [Mixer]

Weight 24.0kg (52.9lbs) [Speaker x 2 + Powered Mixer]

*1. Shelving turnover/rolloff frequency: 3dB before maximum or boost.

GENERAL SPECIFICATIONS (SPEAKERS)

Enclosure

Crossover Frequency

2-way bass-reflex type, Polyprolylene, Black

4.0kHz (LF:12dB/oct, HF:12dB/oct)

Speaker Unit LF: 10" (25cm) Cone

HF: 1" (2.54cm) Compression Driver

DIMENSIONS

MIXER

330.0

MSC MSC MSC MSC

111.5

SPEAKER unit : mm

2-M8x25

342

120

298 pole diameter 35-36

STAGEPAS 300

GENERAL SPECIFICATIONS (MIXER)

Output Power (Maximum)

Output Power (RMS)

Frequency response

Total harmonic distortion

Hum & noise

(Equivalent Input Noise,

150W + 150W / 6 Ω @10% THD at 1kHz (SPEAKERS L/R)

100W + 100W / 6 Ω @ 1% THD at 1kHz (SPEAKERS L/R)

-3dB, 0dB, +1dB @20Hz-20kHz, 1W Output/6 Ω

(MUSIC/SPEECH switch=[SPEECH])(SPEAKERS L/R)

-3dB, 0dB, +1dB @20Hz-20kHz, +4dBu 10k Ω load

(MUSIC/SPEECH switch=[MUSIC])(MONITOR OUT,REC OUT)

Less than 1% @1kHz, 50W Output Power (SPEAKERS L/R)

Less than 0.5% @20Hz-20kHz, +14dBu 10k Ω load

(MONITOR OUT,REC OUT)

Less than -65dBu (Residual noise)(SPEAKER OUT)

Less than -90dBu (Residual noise)(MONITOR OUT,REC OUT)

Rs=150 Ω, MIC/LINE = MIC)

Crosstalk (@1kHz) Less than -70dB

Input Channel Equalization

*1 ±15 dB (MAX)

HIGH: 10kHz shelving

LOW: 100Hz shelving

Power consumption 70W

Dimensions (W x H x D) 275 x 456 x 255mm (10.8" x 18.0" x 10.0") [Speaker x 1]

290 x 96 x 160mm (11.4" x 3.8" x 6.3") [Mixer]

Weight 18.0kg (39.7lbs) [Speaker x 2 + Powered Mixer]

*1. Shelving turnover/rolloff frequency: 3dB before maximum or boost.

GENERAL SPECIFICATIONS (SPEAKERS)

Enclosure

Speaker unit

Bass-reflex type

LF:8" (20cm) cone

HF:1" (2.54cm) Compression driver

Crossover frequency 4kHz

Frequency range 55Hz to 20kHz

DIMENSIONS

MIXER

290 96.3

SPEAKER

2-M8x25

275

120

255 unit : mm

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement