advertisement
®
Pro Tools Shortcuts Guide
Version 9.0
Legal Notices
This guide is copyrighted ©2011 by Avid Technology, Inc.,
(hereafter “Avid”), with all rights reserved. Under copyright laws, this guide may not be duplicated in whole or in part without the written consent of Avid.
003, 96 I/O, 96i I/O, 192 Digital I/O, 192 I/O, 888|24 I/O,
882|20 I/O, 1622 I/O, 24-Bit ADAT Bridge I/O, AudioSuite,
Avid, Avid DNA, Avid Mojo, Avid Unity, Avid Unity ISIS,
Avid Xpress, AVoption, Axiom, Beat Detective, Bomb Factory,
Bruno, C|24, Command|8, Control|24, D-Command, D-Control,
D-Fi, D-fx, D-Show, D-Verb, DAE, Digi 002, DigiBase,
DigiDelivery, Digidesign, Digidesign Audio Engine, Digidesign
Intelligent Noise Reduction, Digidesign TDM Bus, DigiDrive,
DigiRack, DigiTest, DigiTranslator, DINR, DV Toolkit, EditPack,
Eleven, EUCON, HD Core, HD Process, Hybrid, Impact,
Interplay, LoFi, M-Audio, MachineControl, Maxim, Mbox,
MediaComposer, MIDI I/O, MIX, MultiShell, Nitris, OMF,
OMF Interchange, PRE, ProControl, Pro Tools M-Powered,
Pro Tools, Pro Tools|HD, Pro Tools LE, QuickPunch, Recti-Fi,
Reel Tape, Reso, Reverb One, ReVibe, RTAS, Sibelius,
Smack!, SoundReplacer, Sound Designer II, Strike, Structure,
SYNC HD, SYNC I/O, Synchronic, TL Aggro, TL AutoPan,
TL Drum Rehab, TL Everyphase, TL Fauxlder, TL In Tune,
TL MasterMeter, TL Metro, TL Space, TL Utilities, Transfuser,
Trillium Lane Labs, Vari-Fi, Velvet, X-Form, and XMON are trademarks or registered trademarks of Avid Technology, Inc.
Xpand! is Registered in the U.S. Patent and Trademark Office.
All other trademarks are the property of their respective owners.
Product features, specifications, system requirements, and availability are subject to change without notice.
Guide Part Number 9329-65056-00 REV C 2/11
Documentation Feedback
At Avid, we are always looking for ways to improve our documentation. If you have comments, corrections, or suggestions regarding our documentation, email us at
Pro Tools Shortcuts
(for Pro Tools Systems on Mac and Windows)
For increased operational speed and ease-of-use, there are many Pro Tools
®
keyboard and right-click shortcuts to give you fast access to a wide variety of tasks. This guide lists all keyboard shortcuts and
Right-click shortcuts available in each window of Pro Tools, and are grouped by functional area for your added convenience and quick reference.
Menu commands that have a keyboard shortcut display their keyboard shortcut on-screen, to the right of the menu command.
Conventions Used in This Guide
Our guides use the following conventions to indicate menu choices and key commands:
Convention
File > Save Session
Action
Choose Save Session from the File menu.
Command+N/Control+N Hold down the Command (Apple) key (Mac) or the Control (Ctrl) key (Windows) and press the N key.
Option+Plus/Minus (+/–) keys Hold down the Option key and press the Plus (+) or Minus (–) key (on numeric keypad or QWERTY, as noted).
Command-click (Mac Only)
Right-click
Hold down the Command key and click the mouse button.
Click with the right mouse button.
Pro Tools Shortcuts 1
Keyboard Shortcuts
Global Keyboard Shortcuts
The following shortcuts can be used in all Pro Tools windows for the features noted.
Actions Mac Windows
Parameter change
• Automation mode • Monitor mode • playlist enable • record, solo and mute enable • record and solo safes
• inserting plug-ins • I/O, bus, send assignment • volume/peak indicator • extend Edit or Timeline selection
• track height • clear clip meter
Change parameter on all channel strips
Option+applicable function (applicable functions listed above)
Alt+applicable function (applicable functions listed above)
Change parameter on all selected channel strips
Option+Shift+applicable function
(applicable functions listed directly above)
Alt+Shift+applicable function
(applicable functions listed above)
Toggle
• Tracks in Track List • Group enables/activation • Automation Enable window • Memory Location parameters
Toggle item and set all others to same new state
Option-click on applicable item
(applicable items listed above)
Alt-click on applicable item (applicable items listed above)
Toggle item and set all others to opposite state
Command-click on applicable item
(applicable items listed directly above)
Control-click on applicable item
(applicable items listed above)
Fine Tune adjustment
• Plug-in parameter editing • fader movement • scrubbing • automation data trimming (requires larger Track
View for highest resolution)
Fine Tune (Fine Adjust mode) Command-click on applicable fader/pot/breakpoint function
(applicable functions listed above)
Control-click on applicable fader/pot/breakpoint function
(applicable functions listed above)
Multi-select
• Tracks • regions in Region List • paths in I/O Setup
Select multiple contiguous items
(tracks, regions, paths)
Click to select first item, then Shiftclick another to select all similar items between (applicable items listed above)
Click to select first item, then Shiftclick another to select all similar items between (applicable items listed above)
Select multiple non-contiguous items (tracks, regions, paths)
Click to select first item, then Command-click another to select all similar items between (applicable items listed above)
Click to select first item, then Control-click another to select all similar items between (applicable items listed above)
2 Pro Tools Shortcuts Guide
Pro Tools Edit Window and Mix Window Keyboard Shortcuts
The following keyboard shortcuts can be used in the Edit WIndow and Mix Window for the features noted.
Action
Playback
Start/stop playback
Mac Windows
Spacebar
Shift+Spacebar
Spacebar
Shift+Spacebar Half-speed playback
Pause (pre-prime deck for instant playback and record)
Enable/disable online playback
Center on selection start/end
Control+Spacebar, or Optionclick, on Transport Play button
Start+Spacebar, or Alt-click on Transport Play button
Ctrl+J, or Alt+Spacebar Command+J, or
Option+Spacebar
Left/Right Arrow keys (when selection exceeds window view)
Option+[
Left/Right Arrow keys (when selection exceeds window view)
Alt+[ Play Edit selection
Back/Forward (move the playback location backwards/forwards by the Back/Forward amount) (Pro Tools HD only)
Command+Transport Rewind button or Transport Fast Forward button
Ctrl+Transport Rewind button or Transport Fast Forward button
Back/Forward and Play (move the playback location backwards/forwards by Back/Forward amount and then begin playback) (Pro Tools
HD only)
Command+Option+Transport
Rewind button or Transport
Fast Forward button
Ctrl+Alt+Transport Rewind button or Transport Fast Forward button
Extend a selection backwards by the Back/Forward amount (Pro Tools HD only)
Shift+Command+Transport
Rewind button or Transport
Fast Forward button
Extend the selection backwards by the
Back/Forward amount and begin playback
(Pro Tools HD only)
Loop playback toggle
Shift+Command+Option+Transport
Rewind button or Transport
Fast Forward button
Command+Shift+L, or Control-click on Transport Play button
Dynamic Transport Mode toggle
Transport Master toggle (Pro
Tools/Machine/MMC)
Solo-safe track
Command+Control+P
Command+Backslash (\)
Command-click on track Solo
Shift+Ctrl+ Transport Rewind button or Transport Fast Forward button
Shift+Ctrl+Alt+Transport
Rewind button or Transport
Fast Forward button
Ctrl+Shift+L, or Start-click on
Transport Play button
Ctrl+Start+P
Ctrl+Backslash (\)
Ctrl-click on track Solo
Pro Tools Shortcuts 3
Action
Record
Start record
Mac Windows
Stop record
Stop record and discard recording take (not undoable)
Half-speed record
Command+Spacebar, F12, or
3 (on numeric keypad)*
Ctrl+Spacebar, or F12, or 3
(on numeric keypad)
Spacebar
Command+Period (.)
Spacebar
Ctrl+Period (.)
Command+Shift+Spacebar, or Shift+F12*
Ctrl+Shift+Spacebar, or
Shift+F12
Enable/disable online record
Record-safe track
Command+Option+Spacebar*
Command-click on track
Record Enable button
Cycle through record modes: normal, Destructive, Loop, QuickPunch
™
, TrackPunch,
DestructivePunch
Control-click on Transport
Record Enable button
Ctrl+Alt+Spacebar
Ctrl-click on track Record
Enable button
Start-click on Transport
Record Enable button
Loop Record toggle
TrackPunch toggle (Pro Tools HD only)
QuickPunch toggle
Enter/Exit record during playback in Quick-
Punch
Option+L
Command+Shift+T
Alt+L
Ctrl+Shift+T
Command+Shift+P Ctrl+Shift+P
Command+Spacebar, F12, or click Transport Record button*
Ctrl+Spacebar, F12, or click
Transport Record Enable button
DestructivePunch or TrackPunch enable/disable an audio track
DestructivePunch or TrackPunch enable/disable all audio tracks
DestructivePunch or TrackPunch enable/disable all selected audio tracks
Simultaneously DestructivePunch or Track-
Punch enable/disable and record enable/disable all audio tracks
Control-click the track’s
Record Enable button
Option-Control-click a track’s
Record Enable button
Control-Option-Shift-click a track’s Record Enable button
Option-click a track’s Record
Enable button
Simultaneously DestructivePunch or Track-
Punch enable/disable and record enable/disable all selected audio tracks
Option-Shift-click a track’s
Record Enable button
Temporarily force all VCA slave tracks to toggle their record enable status (Pro Tools HD only)
Option-click the VCA Record
Enable button
Start-click the track’s Record
Enable button
Alt-Start-click a track’s Record
Enable button
Start-Alt-Shift-click a track’s
Record Enable button
Alt-click a track’s Record
Enable button
Alt-Shift-click a track’s Record
Enable button
Alt-click the VCA Record
Enable button
4 Pro Tools Shortcuts Guide
Action
Temporarily force all VCA slave tracks to toggle their Track Input status (Pro Tools HD only)
Enable or disable pre/post-roll time
Set and enable pre/post-roll time
Mac
Option-click the VCA TrackInput button
Command+K
Option-click with Selector before or after selection
Windows
Alt-click the VCA TrackInput button
Ctrl+K
Alt-click with Selector tool before or after selection
Disable and set to zero pre/post-roll time Option-click within selection closer to front or back
Alt-click within selection closer to front or back
*Some Pro Tools recording shortcuts use the same key commands as some Mac OS X shortcuts. If you want to retain use of these key commands in Pro Tools, these OS X shortcuts must be disabled. For more information, see your Setup Guide.
Transport Mode using Numeric Keypad
• Select Numeric Keypad: Transport in the Operations Preferences page.
Play/Stop 0 0
Rewind
Fast Forward
Record Enable
Loop Playback mode on/off
Loop Record mode on/off
QuickPunch mode on/off
Click on/off
Countoff on/off
MIDI Merge/Replace mode on/off 9
Shuttle Mode using Numeric Keypad (Pro Tools HD only)
• Select Shuttle mode in the Operations Preferences page.
1 x Forward playback speed 6
1 x Rewind playback speed
4 x Forward playback speed
4 x Rewind playback speed
1/4 x Forward playback speed
1/4 x Rewind playback speed
7
3
4
9
1
7
8
5
6
3
4
1
2
9
7
6
4
3
1
7
8
5
6
9
3
4
1
2
Pro Tools Shortcuts 5
Action
1/2 x Forward playback speed
Mac
5+6
Windows
5+6
1/2 x Rewind playback speed
2 x Forward playback speed
2 x Backward playback speed
1/16 x Forward playback speed
1/16 x Backward playback speed
Loop playback of Edit Selection
Recall Memory Location
5+4
8+9
8+7
2+3
2+1
0
Period (.)+Memory Location+Period (.)
5+4
8+9
8+7
2+3
2+1
0
Period (.)+Memory Location+Period (.)
Scrub (Jog)/Shuttle
Temporary Scrub mode when using Selector
Extend selection while scrubbing
Shuttle
Shuttle Lock (Classic or Transport mode)
Control-click and drag Start-click and drag
Shift-click and drag with the
Scrubber tool, (also in temporary Scrub mode)
Shift-click and drag with the
Scrubber, (also in temporary
Scrub mode)
Option-click-drag with Scrubber tool, (also in temporary
Scrub mode)
Control+number key 1–9
(1=minimum, 5=real-time,
9=maximum)
Alt-click-drag with Scrubber,
(also in temporary Scrub mode)
Start+number key 1–9
(1=minimum, 5=real-time,
9=maximum)
Change direction during Shuttle Lock (Classic or Transport mode)
Plus/Minus (+/–) keys
For example, Control+number+Minus (–) key
Plus/Minus (+/–) keys
For example, Start+number+Minus (–) key
Shuttle Lock stop (Classic or Transport mode) 0 (press number key to resume shuttle)
Exit Shuttle Lock mode (Classic or Transport mode)
0 (press number key to resume shuttle)
Spacebar or Escape (Esc) key Spacebar or Escape (Esc) key
6 Pro Tools Shortcuts Guide
Action Mac
Auditioning
• These shortcuts are active only when Transport is Pro Tools
Windows
Play by pre-roll value up to selection start/end
(or current location if no selection)
Option+Left/Right Arrow keys Alt+Left/Right Arrow keys
Play by post-roll value from selection start/end
(or current cursor location if no selection)
Command+Left/Right Arrow keys
Play by pre- and post-roll value through selection start/end
Command+Option+
Left/Right Arrow keys
Auditioning
• These shortcuts are active only when Transport is MMC
Cue Transport to selection start/end Command+Left/Right Arrow keys
Cue Transport with pre/post-roll to selection start/end
Edit Modes and Edit Tools
Shuffle mode
Ctrl+Left/Right Arrow keys
Ctrl+Alt+Left/Right Arrow keys
Ctrl+Left/Right Arrow keys
Option+Left/Right Arrow keys Alt+Left/Right Arrow keys
Slip mode
Spot mode
Grid mode
F1, or Alt+1 (on QWERTY keyboard)
F1, or Option+1 (on QWERTY keyboard)
F2, or Alt+2 (on QWERTY keyboard)
F2, or Option+2 (on QWERTY keyboard)
F3, or Alt+3 (on QWERTY keyboard)
F3, or Option+3 (on QWERTY keyboard)
F4, or Alt+4 (on QWERTY keyboard)
F4,or Option+4 (on QWERTY keyboard)
Shfit+F4 Shfit+F4 Enable Snap To Grid while in another Edit mode
Enable Snap to Grid and Shuffle mode
Enable Snap to Grid and Slip mode
Enable Snap to Grid and Spot mode
Zoomer tool
Trimmer tool
Selector tool
F1+F4
F2+F4
F3+F4
F5, or Command+1 (on
QWERTY keyboard)
F6, or Command+2 (on
QWERTY keyboard)
F7, or Command+3 (on
QWERTY keyboard)
F1+F4
F2+F4
F3+F4
F5, or Ctrl+1 (on QWERTY keyboard)
F6, or Ctrl+2 (on QWERTY keyboard)
F7, or Ctrl+3 (on QWERTY keyboard)
Pro Tools Shortcuts 7
Action
Grabber tool
Mac
F8, or Command+4 (on
QWERTY keyboard)
Windows
F8, or Ctrl+4 (on QWERTY keyboard)
Scrubber tool
Pencil tool
Smart Tool
Cycle through Edit modes
Cycle through Edit tools
F9, or Command+5 (on
QWERTY keyboard, if
Mac OS X Expose is disabled)
F9, or Ctrl+5 (on QWERTY keyboard)
F10, or Command+6 (on
QWERTY keyboard, if
Mac OS X Expose is disabled)
F10, or Ctrl+6 (on QWERTY keyboard)
F6+F7, F7+F8, or Command+7 (on QWERTY keyboard)
F6+F7, F7+F8, or Ctrl+7 (on
QWERTY keyboard)
Single Open Quote (‘) key, located above the Tab key
Escape (Esc) key
Single Open Quote (‘) key, located above the Tab key
Escape (Esc) key, or Centerclick
Ctrl-click the Shuffle button Lock out or unlock Shuffle Mode Command-click the Shuffle button
Edit Selection, Definition, and Navigation
Enable or disable Tab to Transients command Command+Option+Tab
Locate cursor to next transient
Locate cursor to previous transient
Locate cursor to next region-boundary/sync point
Locate cursor to previous region boundary/sync point
Go to and select next region
Go to and select previous region
Go to Song Start
Extend selection to Song Start
Tab (if Tab to Transient enabled)
Option+Tab (if Tab to Transient enabled)
Tab (if Tab to Transients button is disabled)
Option+Tab (if Tab to Transients button is disabled)
Control+Tab
Control+Option+Tab
Control+Return
Shift+Control+Return
Extend selection to next region-boundary Shift+Tab
Extend selection to previous region-boundary Option+Shift+Tab
Extend selection to include next region Control+Shift+Tab
Ctrl+Alt+Tab
Tab (if Tab to Transient enabled)
Ctrl+Tab (if Tab to Transient enabled)
Tab (if Tab to Transients button is enabled)
Ctrl+Tab (if Tab to Transients button is enabled)
Start+Tab
Start+Ctrl+Tab or Start+Ctrl
Start+Enter
Shift+Start+Enter
Shift+Tab
Ctrl+Shift+Tab
Start+Shift+Tab
8 Pro Tools Shortcuts Guide
Action
Extend selection to include previous region
Mac
Control+Shift+Option+Tab
Windows
Start+Shift+Ctrl+Tab
Return to start of session
Go to end of session
Extend selection to start of session
Extend selection to end of session
Return
Option+Return
Shift+Return
Option+Shift+Return
Link Timeline and Edit selection
Set selection start/end during playback
Shift+Forward Slash (/)
Down/Up Arrow keys
Set selection start/end to incoming time code while stopped
Down/Up Arrow keys
Enter
Ctrl+Enter
Shift+Enter
Ctrl+Shift+Enter
Shift+Forward Slash (/)
Down/Up Arrow keys
Down/Up Arrow keys
Select entire region in Edit window
Select entire track in Edit window
Select all regions in all tracks in Edit window
Extend cursor or selection across all tracks
Double-click with Selector Double-click with Selector tool
Triple-click with Selector, or single-click in track and press
Command+A
Triple-click with Selector tool, or single-click in track and press Ctrl+A
Enter, then press Ctrl+A Return, then press Command+A
Enable “All” Edit group and
Shift-click on any other track
Command+Control+Option+Apostrophe (’)
Enable “All” Edit group and
Shift-click on any other track
Ctrl+Alt+Start+Apostrophe (’) Move the selection forward by the selection amount
Move the selection backward by the selection amount
Command+Control+Option+L Ctrl+Alt+Start+L
Double the length of the Edit selection Command+Control+Option+Shift+ Apostrophe (‘)
Ctrl+Alt+Start+Shift+Apostrophe (’)
Ctrl+Alt+Start+Shift+L Halve the length of the selection Command+Control+Option+Shift+L
Option+Shift+E Cancel Zoom toggle and remain at the same zoom level
Fit all shown tracks in the Edit window Command+Option+Control+Up arrow or Down arrow
Record enable tracks that contain the Edit cursor or Edit selection
Shift+R
Alt+Shift+E
Ctrl+Alt+Start+Up
Shift+R
Pro Tools Shortcuts 9
Action
TrackInput Monitor enable tracks that contain the Edit cursor or Edit selection (Pro Tools HD only)
Mac
Shift+I
Windows
Shift+I
Solo tracks that contain the Edit cursor or Edit selectio
Shift+S
Mute tracks that contain the Edit cursor or Edit selection
Shift+M
Move the insertion to the beginning of the Edit selection
Down arrow
Move the insertion to the end of the Edit selection
Up arrow
Shift+S
Shift+M
Up arrow
Down arrow
Increase or decrease the height of any lane that contains the Edit cursor or an Edit selection
Control+Up/Down Arrow Start+Up/Down Arrow
Editing, Nudging, and Trimming
• In the following shortcuts, the Plus/Minus (+/–) key usage is on the numeric keypad only.
Change Grid value Control+Option+Plus/Minus
(+/–) keys
Start+Alt+Plus/Minus (+/–) keys
Change Nudge value Command+Option+Plus/Minus
(+/–) keys
Ctrl+Alt+Plus/Minus (+/–) keys
Nudge back by next Nudge value
(Nudge Edit selection and any regions entirely inside the Edit selection)
Minus (–) key (on numeric keypad), or Comma (,) (in Commands Keyboard Focus)
Minus (–) key (on numeric keypad), or Comma (,) (in Commands Keyboard Focus)
Nudge forward by next Nudge value
(Nudge Edit selection and any regions entirely inside the Edit selection)
Plus (+) key (on numeric keypad), or Period (.) (in Commands Keyboard Focus)
Plus (+) key (on numeric keypad), or Period (.) (in Commands Keyboard Focus)
Shift+Plus/Minus (+/–) keys Shift+Plus/Minus (+/–) keys Nudge start/end data to right/left by Nudge value (keeps underlying audio and moves start/end)
Start+Plus/Minus (+/–) keys Nudge data within current region to right/left by Nudge value (keeps region start/end and moves underlying audio)
Control+Plus/Minus (+/–) keys
Nudge left selection boundary right/left by
Nudge value
Nudge right selection boundary right/left by
Nudge value
Option+Shift+Plus/Minus
(+/–) keys
Command+Shift+Plus/Minus
(+/–) keys
Alt+Shift+Plus/Minus (+/–) keys
Ctrl+Shift+Plus/Minus (+/–) keys
10 Pro Tools Shortcuts Guide
Action
Trim left edge of region to right/left by Nudge value
Mac
Option+Plus/Minus (+/–) keys
Windows
Alt+Plus/Minus (+/–) keys
Trim right edge of region to right/left by Nudge value
Command+Plus/Minus (+/–) keys
Ctrl+Plus/Minus (+/–) keys
Reverse Trimmer tool direction when trimming region
Option+Trimmer tool Alt+Trimmer tool
Trim up to, but not over, adjacent regions
Duplicate region(s) in Edit Window
Delete selection in playlist
Constrain audio region to vertical movement
Hold down Control key while trimming
Option-click selection and drag to destination
Backspace or Delete (on
QWERTY keyboard)
Control-click to move audio region with Grabber tool
Hold down Start key while trimming
Alt-click selection and drag to destination
Backspace or Delete (on
QWERTY keyboard)
Start-click to move audio region with Grabber tool
Snap region start to stationary playhead or
Edit selection start
Control-click new region with
Grabber tool
Snap region sync point to stationary playhead or Edit selection start
Control-Shift-click region containing the sync point with
Grabber tool
Snap region end to stationary playhead or Edit selection start
Command-Control-click new region with Grabber tool
Start-click new region with
Grabber tool
Start-Shift-click region containing the sync point with
Grabber tool
Ctrl-Start-click new region with Grabber tool
Track Compositing
• The following shortcuts apply to track Playlist lanes in the Edit window (if applicable)
Solo the Playlist lane containing the Edit cursor
Shift+S Shift+S
Move the Edit cursor up and down through
Playlist lanes
Copy the selection to the main Playlist
Control+P and Control+Semi-
Colon (;)
Option+Control+V
Control+\ Create a new playlist for the first selected track in the session
Create a new playlist for each track in the session
Control+Option+\
Start+P and Start+Semicolon
(;)
Alt+Start+V
Start+\
Start+Alt+\
Create a new playlist for each selected track in the session
Control+Option+Shift+\ Start+Alt+Shift+\
Pro Tools Shortcuts 11
Action
Duplicate the main playlist for the first selected track in the session
Mac
Command+Control+\
Windows
Control+Start+\
Duplicate the main playlist for each track in the session
Duplicate the main playlist for each selected track in the session
Zoom
Command+Option+Control+\ Control+Alt+Start+\
Command+Option+
Control+Shift+\
Control+Alt+Start+Shift+\
Horizontal zoom in or out
Zoom in horizontally on a selection without affecting vertical zoom or scrolling
Command+ ] or [
Zoom to show entire session horizontally without affecting vertical zoom or scrolling
Command+Control+[
Command+Control+]
Vertical zoom to show all tracks
Horizontal zoom to show all tracks
Option+A
Option+Control+A
Ctrl+ ] or [
Ctrl+Start+[
Ctrl+Start+]
Vertical zoom to show default waveform height
(Audio)
Command+Option+Control+[ Ctrl+Alt+Start+[
Command+Option+ [ or ] Ctrl+Alt+ [ or ] Incrementally zoom vertically on all audio tracks
Vertical zoom in or out (MIDI) Command+Shift+ ] or [
Vertical zoom to show all notes (lowest to highest) in MIDI and Instrument (MIDI)
Command+Control+Shift+[
Ctrl+Shift+ ] or [
Ctrl+Start+Shift+[
Alt+A
Alt+Start+A
Alt+F Horizontal zoom and scroll timeline excluding
MIDI events
Option+F
Horizontal zoom to selection, including MIDI events
Option+Control+F Alt+Start+F
Continuously zoom vertically on a single audio track (or group of tracks)
Control+drag with the Zoomer tool up or down in the track
Start-drag with the Zoomer tool up or down in the track
Continuously zoom vertically on all audio tracks
Incrementally zoom vertically on all audio tracks
Fill window with selection
Control+Shift+drag in an audio track with the Zoomer tool
Command+Option+[ or Command+Option+]
Option-click on Zoomer tool or
Option+F
Start+Shift-drag in an audio track with the Zoomer tool
Press Ctrl+Alt+[ or Ctrl+Alt+ ]
Alt-click on Zoomer tool or
Alt+F
12 Pro Tools Shortcuts Guide
Action
View entire session and reset waveform display to the default height
Mac
Double-click on Zoomer tool or Option+A
Windows
Double-click on Zoomer tool or Alt+A
Set all audio track waveform heights to match the waveform height of the top-most audio track in the Edit window
Command-Shift-click any of the Zoom buttons
Zoom vertical and horizontal axis
Zoom to previous orientation
Maximum zoom before waveform drawn from disk (faster drawing from RAM)
Zoom Toggle
Ctrl-Shift-click any of the
Zoom buttons
Hold down Command key while dragging the Zoomer tool
Hold down Ctrl key while dragging Zoomer tool
Option-click on any Horizontal
Zoom In or Out button, or
Audio or MIDI Zoom In or Out button
Alt-click on any Horizontal
Zoom In or Out button, or
Audio or MIDI Zoom In or Out button
Command-click on Zoomer tool
Ctrl-click on Zoomer tool)
Control+E
Option+Shift+E
Start+E
Alt+Shift+E Cancel Zoom Toggle and remain at the same zoom level
Recall Zoom presets 1–5 Control+Zoom preset number
(1, 2, 3, 4, or 5 on QWERTY keyboard), or Zoom preset number (1, 2,
3, 4, or 5 on QWERTY keyboard, in Commands Keyboard Focus)
Start+Zoom preset number
(1, 2, 3, 4, or 5 on QWERTY keyboard), or Zoom preset number (1, 2,
3, 4, or 5 on QWERTY keyboard in Commands Keyboard
Focus)
Save Zoom presets 1-5 Command-click Zoom preset number in Mix Window toolbar
Ctrl-click Zoom preset number in Mix Window toolbar
File Menu
• The following are shortcuts of commands found in the File Menu
New Session Command+N Ctrl+N
Open Session
Open Recent
Close session
Save Session
Bounce to Disk
Import Session Data
Command+O
Command+Shift+O
Command+Shift+W
Command+S
Command+Option+B
Shift+Option+I
Ctrl+O
Ctrl+Shift+O
Ctrl+Shift+W
Ctrl+S
Ctrl+Alt+B
Shift+Alt+I
Pro Tools Shortcuts 13
Action
Import Audio
Mac
Command+Shift+I
Import MIDI Command+Option+l
Print Score from Pro Tools Session Command+P
Missing File Dialog
• The following shortcuts apply to Missing File Dialog
Skip all missing files Command+S
Manually find and relink all missing files
Automatically find and relink all missing files
Regenerate missing fades
Command+M
Command+A
Command+R
Regenerate missing render files Command+D
Edit Menu
• The following are shortcuts of commands found in the File Menu
Undo Command+Z
Redo
Cut
Copy
Paste
Clear
Select All
Paste Special Merge
Paste Special Repeat to Fill Selection
Paste Special to Current Automation Type
Change Timeline Selection to Edit Selection
Command+Shift+Z
Command+X
Command+C
Command+V
Command+B
Command+A
Option+M
Command+Option+V
Command+Control+V
Option+Shift+6 (on numeric keypad)
Change Edit Selection to Match Timeline
Selection
Play Edit Selection
Option+Shift+5 (on numeric keypad)
Option+[
Play Timeline Selection (in Dynamic Transport
Mode or when Link Timeline and Edit Selection is disabled)
Option+]
Windows
Ctrl+Shift+I
Ctrl+Alt+l
Ctrl+P
Ctrl+S
Ctrl+M
Ctrl+A
Ctrl+R
Ctrl+D
Ctrl+Z
Ctrl+Shift+Z
Ctrl+X
Ctrl+C
Ctrl+V
Ctrl+B
Ctrl+A
Alt+M
Ctrl+Alt+V
Ctrl+Start+V
Alt+Shift+6
Alt+Shift+5
Alt+[
Alt+]
14 Pro Tools Shortcuts Guide
Action
Duplicate selection
Mac
Command+D
Windows
Ctrl+D
Repeat selection
Shift selection
Insert Silence
Trim Region to Selection
Trim Region Start to Insertion
Trim Region End to Insertion
Separate Region at Selection
Heal Separation
Strip Silence
Consolidate selection
Option+R
Option+H
Command+Shift+E
Command+T
Option+Shift+7
Option+Shift+8
Command+E
Command+H
Alt+R
Alt+H
Ctrl+Shift+E
Ctrl+T
Alt+Shift+7
Alt+Shift+8
Ctrl+E
Ctrl+H
Command+U
Option+Shift+3
Option+Shift+U
Ctrl+U
Alt+Shift+3
Alt+Shift+U TCE Edit to Timeline selection
(Pro Tools HD systems and Pro Tools LE with
DV Toolkit
™
2 only)
Restore Last Selection
Memory Location and Markers
Create Memory Location
Command+Option+Z Ctrl+Alt+Z
Edit a Memory Location
Delete Memory Location
Enter (on numeric keypad) Enter (on numeric keypad)
Control-click on Memory Location marker
Start-click on Memory Location marker
Option-click on a Memory
Location marker
Alt-click on a Memory Location marker
Recall a Memory Location using the numeric keypad
Move only the Song Start Marker, without moving any tick-based data
Toggle the Timeline Insertion/Play Start
Marker Follows Playback preference on and off
Period (.)+Memory Location number+Period (.) (Transport or Shuttle mode), or Memory Location number+Period (.) (Classic mode)
Period (.)+Memory Location number+Period (.) (Transport or Shuttle mode), or Memory Location number+Period (.) (Classic mode)
Control-Shift-drag the Song
Start Marker
Control+N
Start-Shift-drag the Song
Start Marker
Start+N
Pro Tools Shortcuts 15
Action
Automation
Toggle Track View on all tracks
Mac Windows
Change to previous/next Track View on all tracks included in the current selection
Change to previous/next Track View on all tracks
Disable/enable Automation playlist on selected track
Disable/enable all Automation playlists on selected track
Open Plug-in Automation dialog
Option+Minus (–) key (on
QWERTY keyboard)
Control+Command+Left/Right Arrow keys
Command+Shift-click on
Track View selector
Command+Option+Controlclick on Track View selector
(in Edit window)
Alt+Minus (–) key (on
QWERTY keyboard)
Ctrl+Start+Left/Right Arrow keys
Control+Option+Command+Left/Right Arrow keys
Ctrl+Alt+Start+Left/Right
Arrow keys
Command-click on Track View selector
Ctrl-click on Track View selector
Ctrl+Shift-click on Track View selector
Ctrl+Alt+Start-click on parameters (in Plug-in window)
Access Plug-in Automation commands
(Pro Tools HD only): Automation dialog,
Enable/disable plug-in automation
Command+Option+Controlclick on parameters (in Plug-in window)
Ctrl-Alt-Start-click on Track
View selector (in Edit window)
Copy Automation to Send (Pro Tools HD only) Command+Option+H
Thin Automation Command+Option+T
Ctrl+Alt+H
Ctrl+Alt+T
Write automation to start of session/selection
(Pro Tools HD only)
Write automation from start to end of session/selection (Pro Tools HD only)
Control-click on Transport
Return to Zero button
Write automation to end of session/selection
(Pro Tools HD only)
Control-click on Transport Go to End button
Start-click on Transport Go to
End button
Control-Shift-click on Transport Go to End or Return to
Zero button
Start-click on Transport
Return to Zero button
Start-Shift-click on Transport
Go to End or Return to Zero button
Command+Forward Slash (/) Ctrl+Forward Slash (/) Write Automation to Current Parameter
(Pro Tools HD only)
Write Automation to All Enabled Parameters
(Pro Tools HD only)
Trim Automation to Current Parameter
(Pro Tools HD only)
Trim Automation to All Enabled Parameters
(Pro Tools HD only)
Command+Option+Forward
Slash (/)
Command+Shift+Forward
Slash (/)
Command+Option+Shift+Forward Slash (/)
Ctrl+Alt+Forward Slash (/)
Ctrl+Shift+Forward Slash (/)
Ctrl+Alt+Shift+Forward Slash
(/)
16 Pro Tools Shortcuts Guide
Action
Glide Automation to Current Parameter
(Pro Tools HD and Pro Tools LE with DV Toolkit
2 only)
Mac
Option+Forward Slash (/)
Windows
Alt+Forward Slash (/)
Glide Automation to All Enabled Parameters
(Pro Tools HD and Pro Tools LE with DV Toolkit
2 only)
Option+Shift+ Forward Slash
(/)
Alt+Shift+ Forward Slash (/)
Suspend Trim automation on all tracks In the Automation window,
Command-click the Suspend button
In the Automation window,
Ctrl-click the Suspend button
Suspend currently displayed automation type on a track
Command-click the control name in the Track View selector
Ctrl-click the control name in the Track View selector
Vertically constrain automation movement
Write new breakpoint to next automation value Press and hold Option+Shift while writing a breakpoint (by clicking with the Grabber tool in a track’s Automation playlist)
Press and hold Alt+Shift while writing a breakpoint (by clicking with the Grabber tool in a track’s Automation playlist)
Write new breakpoint to previous automation value
Press Shift and move automation with Grabber tool
Press Shift and move automation with Grabber tool
Press and hold Command+Option while writing a breakpoint (by clicking with the Grabber tool in a track’s
Automation playlist)
Press and hold Ctrl+Alt while writing a breakpoint (by clicking with the Grabber tool in a track’s Automation playlist)
AutoMatch all controls on a track (Pro Tools
HD only)
Command-click the Automation Mode selector on the track
Ctrl-click the Automation
Mode selector on the track
AutoMatch all controls of one automation type
(Pro Tools HD only)
In the Automation window,
Command-click the button for the automation type
In the Automation window,
Ctrl-click the button for the automation type
AutoMatch all controls of one automation type on a channel (Pro Tools HD with ICON work surface only)
Hold Command and press the
Channel Strip Mode controls for the track whose controls you want to AutoMatch
Hold Ctrl and press the Channel Strip Mode controls for the track whose controls you want to AutoMatch
AutoMatch a Pan control or the controls for an individual Insert or Send (Pro Tools HD with
ICON work surface only)
Hold Command and press the
Rotary Encoder Select switch for the control you want to
AutoMatch
Hold Ctrl and press the Rotary
Encoder Select switch for the control you want to
AutoMatch
Pro Tools Shortcuts 17
Action
AutoMatch the controls for a plug-in displayed in the Dynamics or EQ section (Pro Tools HD with ICON work surface only)
Mac Windows
Hold Command and press the
Auto switch in the Dyn or EQ section of the console
Hold Ctrl and press the Auto switch in the Dyn or EQ section of the console
Suspend preview (Pro Tools HD only)
Special Paste of automation data between different controls
Command+Control+V
Configure Write on Stop modes to remain enabled after an automation pass (Pro Tools
HD only)
In the Automation window,
Command-click the Preview button
In the Automation window,
Ctrl-click the Preview button
Start+Ctrl+V
Option-click one of the Write
On Stop modes (Start, End, or
All) to enable the Write On
Stop mode
Alt-click one of the Write On
Stop modes (Start, End, or
All) to enable the Write On
Stop mode
Display Automation playlist of automationenabled plug-in control, track volume, or track pan
Command-Control-click on control
Delete*
Cut*
Backspace
Command+X
Copy*
Duplicate*
Clear*
Command+C
Command+D
Command+B
Backspace
Ctrl+X
Ctrl+C
Ctrl+D
Ctrl+B
Insert Silence Command+Shift+E Ctrl+Shift+E
*Hold Down Start during the shortcut to affect all Automation playlists on the track
Fades
Create Fades (open Fades dialog) Command+F Ctrl+F
Apply crossfade without opening Fades dialog Command+Control+F (uses last selected fade shape)
Fade to Start
Fade to End
Option+D
Option+G
Ctrl+Start+F (uses last selected fade shape)
Alt+D
Alt+G
18 Pro Tools Shortcuts Guide
Action Mac
Fades Dialog
• The following shortcuts apply to the Fades dialog
Edit crossfade-in only in Fades dialog Option-drag fade-in curve
(“None” Link mode only)
Edit crossfade-out only in Fades dialog
Audition start/stop in Fades dialog
Reset to default zoom in Fades dialog
Reset standard or S-shape crossfades to default curves
Windows
Command-drag fade-out curve (“None” Link mode only)
Spacebar
Alt-drag fade-in curve (“None” mode only)
Ctrl-drag fade-out curve
(“None” Link mode only)
Spacebar
Command-click on Zoom In or
Zoom Out buttons
Ctrl-click on Zoom In or Zoom
Out buttons
Option-click fade curve in crossfade fade window
(“Equal Power” and “Equal
Gain” Link modes only)
Alt-click fade curve in crossfade fade window (“Equal
Power” and “Equal Gain” Link modes only)
Cycle up/down through Out Shape parameter options
Control+Up/Down Arrow keys Start+Up/Down Arrow keys
Option+Up/Down Arrow keys Alt+Up/Down Arrow keys Cycle up/down through In Shape parameter options
Cycle up/down through Link parameter options
Up/Down Arrow keys Up/Down Arrow keys
Cycle up/down through preset Out Shape curves
Control+Left/Right Arrow keys
Start+Left/Right Arrow keys
Cycle up/down through preset In Shape curves
Option+Left/Right Arrow keys Alt+Left/Right Arrow keys
View Menu
• The following are shortcuts of commands found in the View Menu
View Narrow Mix window option Command+Option+M Ctrl+Alt+M
View Real-Time Properties window Option+4 (on the numeric keypad)
Alt+4 (on the numeric keypad)
Track Menu
• The following are shortcuts of commands found in the Track Menu
New Track Command+Shift+N Ctrl+Shift+N
Group Tracks
Duplicate Tracks
Command+G (with two or more tracks selected)
Option+Shift+D
Ctrl+G (with two or more tracks selected)
Alt+Shift+D
Pro Tools Shortcuts 19
Action
Auto Input Monitoring/Input Only Monitoring
(Pro Tools LE only)
Mac
Option+K
Windows
Alt+K
Set Record Tracks to Input Only/Set Record
Tracks to Auto Input (Pro Tools HD)
Scroll to Track number Command+Option+F
Clear all Clip indicators Option+C
New Tracks Dialog
• The following shortcuts apply to items in the New Tracks dialog
Cycle through Track Type choices Command+Up/Down Arrow keys
Cycle through Track Format choices
Cycle through Track Timebase choices
Option+K Alt+K
Ctrl+Alt+F
Alt+C
Ctrl+Up/Down Arrow keys
Command+Left/Right Arrow keys
Ctrl+Left/Right Arrow keys
Command+Option+Up/Down
Arrow keys
Ctrl+Alt+Up/Down Arrow keys
Add or delete a Track Entry field
Re-arrange Track Entry field (move up/down) Drag the Move Row icon (at the right of each Track Entry row) to desired position
Region Menu
• The following are shortcuts of commands found in the Region Menu
Mute/Unmute Regions
Command+Plus/Minus (+/–) keys or Command+Shift+Up/Down Arrow keys
Ctrl+Plus/Minus (+/–) keys, or Ctrl+Shift+Up/Down Arrow keys
Drag the Move Row icon (at the right of each Track Entry row) to desired position
Command+M Ctrl+M
Ctrl+L Lock/Unlock Regions
Time Lock/Unlock the selected region
Command+L
Option+Control+L Alt+Start+L
Alt+Shift+F Bring to Front
Send to Back
Option+Shift+F
Option+Shift+B Alt+Shift+B
Ctrl+Alt+G Group Regions
Ungroup Regions
Command+Option+G
Command+Option+U Ctrl+Alt+U
Ctrl+Alt+R Regroup regions
Loop Region
Command+Option+R
Command+Option+L
Capture Region Command+R
Ctrl+Alt+L
Ctrl+R
20 Pro Tools Shortcuts Guide
Action
Identify Sync Point
Mac
Command+Comma (,)
Windows
Ctrl+Comma (,)
Quantize Region to Nearest Grid Command+0 (zero) Ctrl+0
Open Elastic Properties windows
Region List
• The following shortcuts apply to items in the Region List
Select region by name
Option+5 (on numeric keypad)
Alt+5 (on numeric keypad)
Click the Region List a–z button, then type the first letters of the desired region
Click the Region List a–z button, then type the first letters of the desired region
Find region
Clear Find
Show/Hide Audio regions
Show/Hide MIDI regions
Show/Hide Groups
Show/Hide Auto-Created region
Select All regions in Region List
Select Unused regions
Clear selected regions
Rename selected regions
Time Stamp selected regions
Export Region Definition
Export Regions as Files
Select or deselect a region
Select multiple contiguous regions
Command+Shift+F
Command+Shift+D
Command+Shift+1 (on numeric keypad)
Command+Shift+2 (on numeric keypad)
Command+Shift+3 (on numeric keypad)
Command+Option+K
Command+Shift+A
Command+Shift+U
Command+Shift+B
Command+Shift+R
Command+Shift+M
Ctrl+Shift+F
Ctrl+Shift+D
Ctrl+Shift+1 (on numeric keypad)
Ctrl+Shift+2 (on numeric keypad)
Ctrl+Shift+3 (on numeric keypad)
Ctrl+Alt+k
Ctrl+Shift+A
Ctrl+Shift+U
Ctrl+Shift+B
Ctrl+Shift+R
Ctrl+Shift+M
Command+Shift+Y
Command+Shift+K
Ctrl+Shift+Y
Ctrl+Shift+K
Command-click a region Ctrl-click a region
Click one region, then Shiftclick another region to select all regions between
Click one region, then Shiftclick another region to select or deselect all regions between
Pro Tools Shortcuts 21
Action
Select or deselect multiple discontiguous regions with the Marquee
Mac Windows
Place the cursor to the left of the names in the Region List.
When the Marquee (“+”) appears, hold Command and drag to select or deselect the desired regions
Place the cursor to the left of the names in the Region List.
When the Marquee (“+”) appears, hold Ctrl and drag to select or deselect the desired regions.
Bypass dialogs during deletion of audio files
Audition region in Region List
Rename region/file
Option-click Delete or Yes when prompted
Option-click and hold on region in Region List
Alt-click Delete or Yes when prompted
Alt-click and hold on region in
Region List
Double-click region in Region
List, or double-click with Grabber tool on region in playlist
Double-click region in Region
List, or double-click with the
Grabber tool on region in playlist
Control and drag region Start-click and drag region Constrain region placement to start at play/edit cursor location or selection start
Constrain region placement to end at play/edit cursor location or selection start
Command+Control and drag region
Track List
• The following shortcuts apply to items in the
Track List
Show/Hide all tracks Option-click on any Eye in
Track List
Start-Ctrl-click and drag region
Select all tracks Option-click on any Track
Name in Track List
Alt-click on any Track Name in
Track List
Mix Group List and Edit Group List
• The following shortcuts apply to items in the Mix Group List and Edit Group List
Suspend All Groups Command+Shift+G, or Command-click on Groups pop-up menu
Ctrl+Shift+G, or Ctrl-click on
Groups pop-up menu
Rename group
Alt-click on any Eye in Track
List
Group enable/disable
Select all tracks in a group
Double-click to far left of
Group name in Group List
Double-click to far left of
Group name in Group List
Click the Group List Keyboard
Focus, then type the letter corresponding to desired group
Click Group List Keyboard
Focus, then type the letter corresponding to desired group
Click to the left of a Group name in Group List
Click to the left of a Group name in Group List
22 Pro Tools Shortcuts Guide
Action Mac
Temporarily isolate channel strip from Groups Control-click (or Right-click) applicable Group parameter
Windows
Show group members only Control-click on Group(s) in
Group List
Create Group and Modify Group Dialogs
• The following shortcuts apply to the Create Group and Modify Group dialogs
Add selected track to a group in Tracks View Press A Press A
Remove selected track from a group in Tracks
View
Press R
Select or deselect all attributes in Attributes
View
Select or deselect all attributes for a single
Send or Insert (across a row) in Attributes
View
Option-Shift-click any attributes
Press R
Alt-Shift-click any attribute
Control-click any attribute in a row
Start-click any attribute in a row
Select or deselect attributes for a single control across all Sends, all Inserts, or for the four track controls (down a column) in Attributes
View
Option-click any attribute in a column
Alt-click any attribute in a column
Elastic Audio
• The following shortcuts apply to Elastic Audio-enabled regions or tracks
Toggle between Real-Time and Rendered Elastic Audio processing
Command-Control-click the
Elastic Audio plug-in button
Ctrl-Start-click the Elastic
Audio plug-in button
Add a Warp marker on top of an event
Relocate a Warp marker (without applying warping)
Delete a Warp marker
Delete all Warp markers in a selection
Telescope-Warp audio before first Warp marker in or out
With the Grabber tool, Control-click any Event marker
With the Grabber tool, Startclick any Event marker
With the Grabber or the Pencil tool, Control-click and drag a
Warp marker to a new location
With the Grabber or the Pencil tool, Start-click and drag a
Warp marker to a new location
Double-click a Warp marker, or with the Grabber or the
Pencil tool, Option-click a
Warp marker
Press Delete or Backspace
Double-click a Warp marker, or with the Grabber or the
Pencil tool, Alt-click a Warp marker
Press Delete or Backspace
With the Grabber tool, Optionclick and drag first Event marker to the left or right
With the Grabber tool, Altclick and drag first Event marker to the left or right
Pro Tools Shortcuts 23
Action
Add an Event marker
Mac Windows
With the Grabber tool, Control-click at the location where you want to add an Event marker
With the Grabber tool, Startclick at the location where you want to add an Event marker
Delete an Event marker With the Graber Tool or Pencil tool, Option-click the Event marker you want to delete
With the Graber Tool or Pencil tool, Alt-click the Event marker you want to delete
Event Menu
• The following are shortcuts that apply commands found in the Event Menu
Open Time Operations window Option+1 (on numeric keypad)
Alt+1 (on numeric keypad)
Open Tempo Operations window
Open Event Operations window
Option+2 (on numeric keypad)
Option+3 (on numeric keypad)
Quantize (in Event Operations window)
Select/Split Notes (in Event Operations window)
Option+0 (on numeric keypad)
Change Duration (in Event Operations window) Option+P
Transpose (in Event Operations window) Option+T
Option+Y
Open MIDI Event List window
Open Beat Detective window
Identify Beat
Alt+2 (on numeric keypad)
Alt+3 (on numeric keypad)
Alt+0 (on numeric keypad)
Alt+P
Alt+T
Alt+Y
Option+Equal (=) Alt+Equal (=)
Command+8 (on numeric keypad)
Ctrl+8 (on numeric keypad)
Command+I Ctrl+I
All MIDI Notes Off Command+Shift+Period (.) Ctrl+Shift+Period (.)
MIDI Events List
• The following shortcuts are active only when the MIDI Event List window is open.
Enter start time field for editing Command+Enter (on numeric keypad)
Ctrl+Enter (on numeric keypad)
Show Event Filter dialog
Go to
Scroll to Edit selection
Insert another event
Command+F
Command+G
Command+H
Command+M
Ctrl+F
Ctrl+G
Ctrl+H
Ctrl+M
24 Pro Tools Shortcuts Guide
Action
Insert note
Mac
Command+N
Windows
Ctrl+N
Insert Program Change
Insert Controller
Insert Poly Pressure
Command+P
Command+L
Command+O (letter)
Ctrl-P
Ctrl+L
Ctrl+O (letter)
Delete event in MIDI Events List Option-click Alt-click
Step Input Dialog
• The following shortcuts are available in the Event Operations Step Input window, when the Enable Numeric Keypad Shortcuts option is checked.
Whole note 1 1
1/2 note
1/4 note
1/8 note
1/16 note
1/32 note
1/64 note
Dotted note
Toggle Tuplet on/off
Next step
Undo step
Nudge forward
Nudge back
Select Main Location indicator
Edit Selection indicators
5
6
2
4
7
8
Decimal key (.)
3
Enter
0
Plus (+)
Minus (–)
Equals (=)
/
5
6
2
4
7
8
Decimal key (.)
3
Enter
0
Plus (+)
Minus (–)
Equals (=)
/
Pro Tools Shortcuts 25
Action Mac
Options Menu
• The following are shortcuts of commands found in the Options Menu
Transport Online Command+J
Windows
Ctrl+J
Ctrl+Shift+J Video Track Online Command+Shift+J
Auto-Spot Regions Command+P Ctrl+P
Setup Menu
• The following are shortcuts of commands found in the Setup Menu
Session Setup window Command+2 (on the numeric keypad)
Ctrl+2 (on the numeric keypad)
Peripherals Dialog
• The following shortcuts apply to the Peripherals dialog, available in the Setup menu
Go to Synchronization window Command+1 Ctrl+1
Go to Machine Control window
Go to MIDI Controllers window
Go to Ethernet Controllers window
Command+2
Command+3
Command+4
Ctrl+2
Ctrl+3
Ctrl+4
Go to Mic Preamps window (Pro Tools HD only) Command+5 Ctrl+5
Preferences Dialog
• The following shortcuts apply to the Preferences dialog, available in the Setup menu
Go to Display window Command+1 Ctrl+1
Go to Operation window
Go to Editing window
Go to Automation window
Go to Processing window
Go to MIDI window
Go to Machine Control window
Command+2
Command+3
Command+4
Command+5
Command+6
Command+7
Ctrl+2
Ctrl+3
Ctrl+4
Ctrl+5
Ctrl+6
Ctrl+7
26 Pro Tools Shortcuts Guide
Action Mac
Window Menu
• The following are shortcuts of commands found in the Window menu
Toggle Mix and Edit windows Command+Equal (=)
Hide All Floating Windows
Show Window Configuration List
Show Task Manager
Show Workspace
Show Project
Bring to Front
Send to Back
Show Transport
Show Big Counter
Windows
Ctrl+Equal (=)
Ctrl+Alt+Start+W Command+Option+Control+W
Command+Option+J
Option+Apostrophe (‘)
Option+Semi-Colon (;)
Option+O
Option+J
Option+Shift+J
Ctrl+Alt+J
Alt+Apostrophe (‘)
Alt+Semi-Colon (;)
Alt+O
Alt+J
Alt+Shift+J
Command+1 (on numeric keypad)
Ctrl+1 (on numeric keypad)
Command+3 (on numeric keypad)
Ctrl+3 (on numeric keypad)
Show Automation Enable
Show Memory Locations
Machine Track Arming
Show Video Universe window (Pro Tools HD and Pro Tools LE with DV Toolkit 2 only)
Show Video
Open MIDI Editor
Cycle through all open MIDI Editors
Open Score Editor
Access Video window commands (Pro Tools
HD and Pro Tools LE with DV Toolkit 2 only)
Access Video Universe window commands
(Pro Tools HD and DV Toolkit 2 only)
Command+4 (on numeric keypad)
Ctrl+4 (on numeric keypad)
Command+5 (on numeric keypad)
Ctrl+5 (on numeric keypad)
Command+6 (on numeric keypad)
Ctrl+6 (on numeric keypad)
Command+7 (on numeric keypad)
Ctrl+7 (on numeric keypad)
Command+9 (on numeric keypad)
Ctrl+9 (on numeric keypad)
Control+Equal (=)
Control+Equal (=)repeatedly
Start+Equal (=)
Ctrl+Equal (=) repeatedly
Option+Control+Equal (=) Alt+Start+Equal (=)
Control-click (or Right-click) in the Video window
Right-click in the Video window
Control-click (or Right-click) in the Video Universe window
Right-click in the Video Universe window
Pro Tools Shortcuts 27
Action Mac Windows
Window Configuration
• The following shortcuts apply to Window Configurations, found in Windows>Configurations
Add new Window Configuration or replace existing one in Window Configuration List
Period (.)+number (1–99)
+Plus (+)
(numeric keypad only)
Period (.)+number
(1–99)+Plus (+)(numeric keypad only)
Recall a Window Configuration Period (.)+Window Configuration number (1–99)+Asterisk
(*)
(numeric keypad only)
Period (.)+Window Configuration number (1–99)+Asterisk
(*)
(numeric keypad only)
Import Audio Dialog
• The following shortcuts apply to the Import Audio dialog
Start/stop audition of currently selected audio file/region
Command+P, or Command+Spacebar
Spacebar
Add currently selected audio region or file to list
Command+A
(if audio file has the same sample rate and bit depth as the current session)
Alt+S (if audio file has the same sample rate and bit depth as the current session)
Command+C Alt+O (letter) Convert and import selected audio region/files
Remove currently selected audio files/regions from Regions to Import field
Command+R n/a
Remove all audio files/regions from Regions in Current File field
Command+Option+R n/a
Random-access fwd/rew search selected file Drag slider to, or click at, new location
Drag slider to, or click at, new location
Audition selected file
Move between file windows
Cancel
Done
Command+P
Tab
Escape
Command+W
Alt+P
Tab
Escape
Alt+E
28 Pro Tools Shortcuts Guide
DigiBase Shortcuts
The following shortcuts are available in the DigiBase windows, as noted.
Action
Global DigiBase Shortcuts
Open the Workspace browser
Mac Windows
Open the Task Manager window
Open or closes the Project browser
Bring all browsers to the foreground
Send all browsers to the back
Cycle to previous/next browsers
Option+Semi-Colon
Option+Apostrophe (‘)
Option+O
Option+J
Option+Shift+J
Command+Left/Right Arrow keys
Control+1, 2, 3, 4, or 5
Alt+Semi-colon
Alt+Apostrophe (‘)
Alt+O
Alt+J
Alt+Shift+J
Ctrl+Left/Right Arrow keys
View presets in DigiBase browsers
Auditioning
Browser Item: Start or stop auditioning from head (when Spacebar Toggle File Preview is enabled)
– or –
Audio Import dialog:
Start or stop auditioning from head
Spacebar
Start+1, 2, 3, 4, or 5
Spacebar
Browser Item: Start or stop loop auditioning from head
Start or stop preview when browser is frontmost window
Option+Spacebar Alt+Spacebar
Command+P
Stop preview when browser is front-most window
Start and stop Context Preview in the frontmost browser during session playback
Enable/disable Loop Preview mode
Escape
Press Esc or Command+P
Enable/disable Auto-Preview mode
Control-click the Preview button
Command-click the Preview button
Import Audio dialog: Start or stop auditioning Command+P
Ctrl+P
Escape
Press Esc or Ctrl+P
Start-click the Preview button
Ctrl-click the Preview button
Alt+P
Pro Tools Shortcuts 29
Action
Delete or Duplicate
Region List: Delete selected Region from the timeline
– or –
Browser Item: Delete items from the browser/disk
Mac
Delete
Delete locked files selected in a browser
Delete any selected browser item, and suppresses any warning dialog
Create duplicates of any selected files
Mouse Click
Select contiguous items in a browser or column headers
Command+Delete
Option+Delete
Command+D
Shift-click
Select all of the files in a multichannel file in a browser
Option+Shift-click
Option-click Column Headers: Make a secondary sort order
– or –
Region List: Audition a file
– or –
Browser Find Button: Cancel a search, and closes the Search pane
– or –
Browser Close Box: Close all open browsers
Column Header: Access list of columns that can be shown or hid
Control-click in any DigiBase column label
Windows
Delete
Ctrl+Delete
Alt+Delete
Ctrl+D
Shift-click
Alt+Shift-click
Alt-click
Start-click (or Right-click) in any DigiBase column label
30 Pro Tools Shortcuts Guide
Action
Browser Back Button: Open the navigation menu
– or –
Browser Items: Select discontiguous items
– or –
Column Headers: Select discontinuous column headers
– or –
Browser Up Button: Open menu for navigating up several levels
– or –
Browser View Preset Buttons: Store column order and width, and sort order
Mac
Command-click
Region List: Select a region without changing which region is highlighted in Timeline
Control-click
Browser Items: Open a new window and leave the original window open
Command-double-click
Drag and Drop
Browser Item: From one folder to another folder on the same volume, create a copy of that item in the target location
– or –
Browser Media File to Region List or Timeline:
Create a copy of the media file in the session’s
Audio Files folder
Option-drag and drop
Browser File: Import to Timeline and create a new track
Shift-drag and drop
Waveform Display: Set sync point and spots to
Timeline
– or –
Region List: Open the Replace Region dialog
(Pro Tools HD and Pro Tools LE with DV Toolkit
2 only)
Command-drag and drop
Waveform Display: Set the sync point and spot to the Timeline and copy the audio file
Command+Option-drag and drop
Windows
Ctrl-click
Ctrl-double-click
Alt-drag and drop
Shift-drag and drop
Ctrl-drag and drop
Ctrl-Alt-drag and drop
Pro Tools Shortcuts 31
Action
Region List: Snap to head
– or –
Browser Audio File, from Name or Icon: Snap to head
– or –
Browser Audio File, from Waveform Display:
Spot to temporary sync point
Mac
Control-drag and drop
Windows
Start-drag and drop
Browser Audio File to Timeline: Snap to head and copy the audio file to the session’s Audio
Files folder
Control+Option-drag and drop Start-Alt-drag and drop
Control+Shift-drag and drop Start-Shift-drag and drop Region List: Snap to sync point
– or –
Browser Item: Snap to sync point
Browser Item: Snap to sync point and copy the audio file to the session’s Audio Files folder
Control+Option-Shift-drag and drop
Start-Alt-Shift-drag and drop
Region List: Snap to tail
– or –
Browser Item: Snap to tail
Control+Command-drag and drop
Start+Ctrl-drag and drop
Browser Item: Snap to tail and copy the audio file to the session’s Audio Files folder
Control+Command+Optiondrag and drop
Browser Item: Spot with variable cursor Control-Command-Shift drag and drop
Start+Ctrl+Alt drag and drop
Start+Ctrl+-Shift drag and drop
Browser Item: Spot with variable cursor and copy the audio file to the session’s Audio Files folder
Control+Command+Option+Shift-drag and drop
Start+Ctrl-Alt+Shift-drag and drop
Navigation
Selection up Up Arrow key Up Arrow key
Selection down
Scroll Page up
Scroll Page down
Scroll to top of browser
Down Arrow key
Page Up
Page Down
Home
Scroll to bottom of browser
Scroll to track
End
Command+Option+F
Up one browser level (same as Up arrow icon) Command+Up Arrow key
Down Arrow key
Page Up
Page Down
Home
End
Ctrl+Alt+F
Ctrl+Up Arrow key
32 Pro Tools Shortcuts Guide
Action
Open folder (new window)
Open Show/Hide icon
Close Show/Hide icon
Cycle to next or previous browser
Enter/exit Name Edit field
Revert to original text
Open/close Search pane
Move to next Search field
Move to previous Search field
Mac
Command+Down Arrow key
Right Arrow key
Left Arrow key
Command+Left/Right Arrow keys
Enter or Return
Escape (Esc) key
Command+F
Tab
Shift+Tab
Windows
Ctrl+Down Arrow key
Right Arrow key
Left Arrow key
Ctrl+Left/Right Arrow keys
Enter
Escape (Esc) key
Ctrl+F
Tab
Shift+Tab
Deck Control Key Commands
(Pro Tools HD with MachineControl™ Only)
Action
Rewind
Fast Forward
Shuttle Backward
Shuttle Forward
Toggle Transport Master
All Transport Buttons Off/Unthread Tape
Search Mode Toggle (Play-Pause/Stop)
When Transport = Machine
Cue to Selection Start
Cue to Selection End
Cue to Selection Start Minus Preroll
Mac
Shift+<
Windows
Shift+<
Shift+>
Option+comma
Option+period
Command+\
Shift+>
Start+comma
Start+period
Control+\
Command+period Control+period
Spacebar/Command+period Spacebar/Ctrl+period
Command+Left Arrow
Command+Right Arrow
Option+Left Arrow
Control+Left Arrow
Control+Right Arrow
Alt+Left Arrow
Pro Tools Shortcuts 33
Right-Click Shortcuts
The following right-click shortcuts apply to both Mac and Windows systems equipped with a twobutton mouse. Right-clicking the noted feature allows you to perform commands and access menus
(if applicable).
Feature
Mix Window
Channel Volume fader
Channel Pan slider
Channel Mute button
Channel Solo button
Channel Record Enable button
Channel TrackInput button
Send fader
Send Pan slider
Channel Input selector
Channel Output selector
Send selector
Send Assignment button
Insert Assignment button
Shortcut
Temporarily isolate control from group operation
• Make Active/Inactive
• Rename
Access send assignment views
• Mute
• Make Active/Inactive
• Rename
• Bypass
• Make Active/Inactive
• Automation dialog (plug-ins only)
• Automation Safe (plug-ins only)
• Rename (hardware I/O only)
34 Pro Tools Shortcuts Guide
Feature Shortcut
Track name
(in Mix window, Edit window and Track List)
Surround Panning Mode button
(in Surround Output Window)
(Pro Tools HD only)
• Hide/Show
• Hide and Make Inactive/Show and Make Active
• Make Inactive/Make Active
• Scroll Into View
• Locked (video track only)
• New
• Rename
• Duplicate
• Split Into Mono (multichannel tracks only)
• Delete
• Expand Channels to New Tracks
•By Channel Name
•By Channel Number
•By Channel Name and Number
•By Timecode
• Track Compositing Commands: Filtering Lanes
•Show All Lanes
•Show Only Lanes With > Regions Within The Edit Selection
•Show Only Lanes With > Regions Outside The Edit Selection
•Show Only Lanes With > Regions Rated >=1–5
•Hide All Lanes
•Hide Only Lanes With > Regions Within The Edit Selection
•Hide Only Lanes With > Regions Outside The Edit Selection
•Hide Only Lanes With > Regions Rated >=1–5
•Rating
Access Panning modes:
• X/Y Mode
• 3-Knob mode
• Divergence Editing mode
• AutoGlide mode
Group List items Access Group List commands and information:
• Group ID
• Tracks (list of tracks in Group)
• Attributes (list of Group Attributes) (Pro Tools HD only)
• Modify
• Duplicate
• Delete
• Select Tracks in Group
• Show/Hide Tracks in Group
• Show/Hide Only Tracks in Group
• Show/Hide All Tracks
Pro Tools Shortcuts 35
Feature
Edit Window
Shortcut
Region, region selection, or point in region
(Blocks and Waveform Track views)
• Tools
•Zoomer
•Trimmer
•Selector
•Grabber
•Scrubber
•Pencil
• Insert
•Key Signature
•Meter
•Chord
• Cut
• Copy
• Paste
• Clear
• Matches (region or region selection only)
•Match Criteria
•Expand Alternates to New Playlists
•Expand Alternates to New Tracks
• Elastic Properties (Elastic Audio track only)
• Conform to Tempo (Elastic Audio track only)
• Remove Warp (Elastic Audio track only)
• Remove Pitch Shift (Elastic Audio track only)
• Separate
• Delete Fades
• Snap to Next
• Snap to Previous
• Spot
• Rename (region or region selection only)
• Group Regions (region or region selection only)
• Ungroup Regions (region or region selection only)
• Loop
• Unloop
• Rating
•1–5
36 Pro Tools Shortcuts Guide
Feature Shortcut
Command+right-click (Mac),
Control+right-click (Windows) region, region selection, or point in region
(Blocks and Waveform Track views)
• Tools
•Zoomer
•Trimmer
•Selector
•Grabber
•Scrubber
•Pencil
• Insert
•Key Signature
•Meter
•Chord
• Cut
• Copy
• Clear
• Matches (Channels or Alternates)
• Elastic Properties (Elastic Audio track only)
• Conform to Tempo (Elastic Audio track only)
• Remove Warp (Elastic Audio track only)
• Snap to Next
• Snap to Previous
• Spot
• Rename
• Move Region Start to Selection Start
• Move Region Sync to Selection Start
• Move Region End to Selection Start
• Loop
• Unloop
Region, region selection, or point in region
(Analysis Track view, Elastic
Audio track only)
• Tools
•Zoomer
•Trimmer
•Selector
•Grabber
•Scrubber
•Pencil
• Insert
•Key Signature
•Meter
•Chord
• Add Event Marker
• Remove Event Marker
• Elastic Properties
• Conform to Tempo
• Remove Warp
• Conform to Tempo
• Remove Warp Marker
• Remove Pitch Shift
Pro Tools Shortcuts 37
Feature
Region, region selection, or point in region (Warp Track view)
Shortcut
• Tools
•Zoomer
•Trimmer
•Selector
•Grabber
•Scrubber
•Pencil
• Insert
•Key Signature
•Meter
•Chord
• Add Warp Marker
• Remove Warp Marker
• Elastic Properties
• Conform to Tempo
• Remove Warp
• Separate
• Delete Fades
• Rename (region only)
• Group (region or region selection only)
• Ungroup (region or region selection only)
• Loop
• Unloop
• Rating
•1–5
38 Pro Tools Shortcuts Guide
Feature
Region, region selection, or point in region (Playlist view only)
Shortcut
• Tools
•Zoomer
•Trimmer
•Selector
•Grabber
•Scrubber
•Pencil
• Insert
•Key Signature
•Meter
•Chord
• Cut
• Copy
• Paste
• Clear
• Copy Selection to New Playlist
• Copy Selection to Main Playlist
• Copy Selection to Duplicate Playlist
• Matches (region or region selection only)
•Match Criteria
•Expand Alternates to New Playlists
•Expand Alternates to New Tracks
• Separate
• Delete Fades
• Snap to Next
• Snap to Previous
• Spot
• Rename (region or region selection only)
• Loop
• Unloop
• Rating
•1–5
Pro Tools Shortcuts 39
Feature
Region, region selection, point in region (Aux Input,
MIDI, and Instrument track only)
Control-Right-click region, region selection, or point in region (Warp Track view)
Shortcut
• Tools
•Zoomer
•Trimmer
•Selector
•Grabber
•Scrubber
•Pencil
• Insert
•Key Signature
•Meter
•Chord
• Cut
• Copy
• Paste
• Merge
• Clear
• Separate
• Consolidate
• Mute Notes
• MIDI Real–Time Properties
• Event Operations
•Quantize
•Change Velocity
•Change Duration
•Transpose
•Select/Split Notes
•Input Quantization
•Step Input
•Restore Performance
•Flatten Performance
• Open in MIDI Editor
• Open in Score Editor
• Add Warp Marker
• Remove Warp Marker
• Elastic Properties
• Conform to Tempo
• Remove Warp
• Rename
• Loop
• Unloop
40 Pro Tools Shortcuts Guide
Feature
Region List items
Shortcut
• Clear
• Rename
• Time Stamp
• Replace Region (Pro Tools HD and Pro Tools LE with DV Toolkit 2 only)
• Compact
• Export Region Definition
• Export Regions as Files
• Recalculate Waveform Overviews
• Select Parent in Workspace
• Object Select in Edit Window
Show/Hide controls in Edit Window toolbar Toolbar
Transport Window
Transport Play button
Transport Record button
Access Playback modes
• Half Speed
• Prime for Playback
• Loop
• Dynamic Transport
Access Record modes
• Normal
• Loop
• Destructive
• QuickPunch
• TrackPunch (Pro Tools HD only)
• DestructivePunch (Pro Tools HD only)
Transport Return to Zero button
Access Automation commands (Pro Tools HD only)
• Write to Start
• Write to All
Transport Go To End button Access Automation commands (Pro Tools HD only)
• Write to End
• Write to All
Universe Window
Universe window Access Universe window commands
Pro Tools Shortcuts 41
Feature
MIDI Editor Window
Midi Editor window Notes
Pane
Shortcut
• Tools
•Zoomer
•Trimmer
•Selector
•Grabber
•Scrubber
•Pencil
•Smart
• Insert
•Key Signature
•Meter
•Chord
• Cut
• Copy
• Paste
• Clear
• Separate
• Consolidate
• Mute
• MIDI Real-Time Properties
• Event Operations
•Quantize
•Change Velocity
•Change Duration
•Transpose
•Select/Split Notes
•Input Quantization
•Step Input
•Restore Performance
•Flatten Performance
• Open in New MIDI Editor
• Open in Score Editor
• Open in MIDI Event List
• Display Notation
42 Pro Tools Shortcuts Guide
Feature Shortcut
MIDI Editor window Track List Access Track List commands:
• Hide/Show
• Hide and Make Inactive/Show and Make Active
• Export MIDI
• New
• Rename
• Duplicate
• Split Into Mono (multichannel tracks only)
• Delete
• MIDI Real-Time Properties
• Open in New MIDI Editor
• Open in Score Editor
• Open in MIDI Event List
• Notation Display Track Settings
Show/Hide controls in MIDI Editor Window toolbar MIDI Editor window toolbar
Score Editor Window
Score Editor window Notes
Pane
• Tools
•Zoomer
•Trimmer
•Selector
•Grabber
•Pencil
• Insert
•Key Signature
•Meter
•Chord Symbol
• Cut
• Copy
• Paste
• Merge
• Clear
• Event Operations
•Quantize
•Change Velocity
•Change Duration
•Transpose
•Select/Split Notes
•Input Quantization
•Step Input
•Restore Performance
•Flatten Performance
• Open in MIDI Editor
• Open in MIDI Event List
• Notation Display Track Settings
• Score Setup
• Send to Sibelius
• Print Score
Pro Tools Shortcuts 43
Feature
Score Editor window Track
List
Shortcut
Show All Tracks
Show Only Selected Tracks
Hide All Tracks
Hide Selected Tracks
Notation Display Track Settings
Score Setup
Show/Hide controls in Score Editor Window toolbar Score Editor window toolbar
Video Window
Video window Access Video window commands
• Online
• Video Out Firewire
• Half Size
• Actual Size
• Double Size
• Fit Screen
DigiBase
Any column header in a
Browser menu
File in Name column of
Browser menu
Access list of DigiBase columns to show or hide
Preview button
Volume field
Access DigiBase Browser menu commands:
• Calculate Waveform
• Update Database for Selected
• Calculate Elastic Analysis
• Clear Elastic Analysis
• Invent Selection
• Reveal in Explorer
• Reveal in Browser
• Duplicate Selected
• Lock Selected
• Unlock Selected
• Delete Selected
• Unmount
• Loop Preview
• Auto-Preview
• Spacebar Toggles File Preview
• Audio Files Conform to Session Tempo
Access DigiBase Preview commands:
• Loop Preview
• Auto-Preview
• Spacebar Toggles File Preview
Display Volume fader
44 Pro Tools Shortcuts Guide
Avid
2001 Junipero Serra Boulevard
Daly City, CA 94014-3886 USA
Technical Support (USA)
Visit the Online Support Center at www.avid.com/support
Product Information
For company and product information, visit us on the web at www.avid.com
advertisement
Related manuals
advertisement
Table of contents
- 3 Pro Tools Shortcuts
- 4 Global Keyboard Shortcuts
- 4 Parameter change
- 4 Toggle
- 4 Fine Tune adjustment
- 4 Multi-select
- 5 Pro Tools Edit Window and Mix Window Keyboard Shortcuts
- 5 Playback
- 6 Record
- 7 Transport Mode using Numeric Keypad
- 7 Shuttle Mode using Numeric Keypad (Pro Tools HD only)
- 8 Scrub (Jog)/Shuttle
- 9 Auditioning
- 9 Auditioning
- 9 Edit Modes and Edit Tools
- 10 Edit Selection, Definition, and Navigation
- 12 Editing, Nudging, and Trimming
- 13 Track Compositing
- 14 Zoom
- 15 File Menu
- 16 Missing File Dialog
- 16 Edit Menu
- 17 Memory Location and Markers
- 18 Automation
- 20 Fades
- 21 Fades Dialog
- 21 View Menu
- 21 Track Menu
- 22 New Tracks Dialog
- 22 Region Menu
- 23 Region List
- 24 Track List
- 24 Mix Group List and Edit Group List
- 25 Create Group and Modify Group Dialogs
- 25 Elastic Audio
- 26 Event Menu
- 26 MIDI Events List
- 27 Step Input Dialog
- 28 Options Menu
- 28 Setup Menu
- 28 Peripherals Dialog
- 28 Preferences Dialog
- 29 Window Menu
- 30 Window Configuration
- 30 Import Audio Dialog
- 31 DigiBase Shortcuts
- 31 Global DigiBase Shortcuts
- 31 Auditioning
- 32 Delete or Duplicate
- 32 Mouse Click
- 33 Drag and Drop
- 34 Navigation
- 35 Deck Control Key Commands
- 35 When Transport = Machine
- 36 Mix Window
- 38 Edit Window
- 43 Transport Window
- 43 Universe Window
- 44 MIDI Editor Window
- 45 Score Editor Window
- 46 Video Window
- 46 DigiBase