Brickcom BP-1000 Datasheet

Below you will find brief information for BP-1000. This battery-embedded PoE splitter delivers continuous power to IP surveillance cameras, even during power loss or network interruption, for up to 30 minutes. It separates power and data from 802.3af PoE cables and can also be powered by DC 12V. When combined with Brickcom’s Edge Recording, it ensures video is stored on the camera’s memory card and transferred automatically once power and network are restored, guaranteeing uninterrupted recording.

PDF

Document

 IEEE 802.3af Compliant

Power over Ethernet

 LED Indicators for Power

Input and Output

 Battery Embedded for

Uninterrupted Recording

 Plug & Play Installation

 Wall-Mountable

Battery Power Pack for Camera

BP-1000

The Brickcom BP-1000 is a battery-embedded PoE splitter, designed specifically for use with IP surveillance cameras. For network products without built-in PoE support, the BP-1000 separates the power and data coming through the 802.3af

Power over Ethernet cable. Unlike normal PoE splitters, the battery embedded design enables the BP-1000 to continue supplying power to a device, such as a surveillance camera, for up to 30 minutes in the event of power loss or network interruption.

The BP-1000 can be powered through a PoE or DC 12V cable, so it can be connected not only to a PoE switch, but to a normal switch or router as well.

Together with Brickcom ’s PC-NVR’s “Edge Recording” function, the BP-1000 continues to supply power when the power and network are disconnected, and the recording video will be stored on the network camera ’s memory card. Once power and network are restored, the network camera will deliver the recorded video to

Brickcom ’s PC-NVR automatically and the result is uninterrupted video during power and network outages.

BP-1000

Product Name

Battery Power Pack for Camera

Standard

IEEE 802.3af Power over Ethernet

IEEE 802.3 10Base-T

IEEE 802.3u, 10/100Base-TX

Power

Input:

802.3af PoE

DC 12V 1A

Output:

DC 12V

Interface

Ethernet Cable Connector

DC Power Connector

Ethernet Cable Plug

DC Power Plug

Power Out on/off Switch

Battery Capacity

3 Wh/1050 mAh

*Example:

WCB-100Ap Max. Power Consumption: 4.5W.

3 Wh/4.5W= 0.67h= 40 mins

The battery can support a WCB-100Ap for up to 40 minutes.

LEDs

Power Input

Battery Charge

Power Output

Operating

Temperature: 41°F ~ 105.8°F (0°C~40°C)

Relative Humidity: 10~80% non-condensing

Dimensions

2.87 × 2.13 × 0.94 inches

(73 × 54 × 24 mm)

Ethernet and Power Cable Length:

35.43 inches

(900 mm)

Net Weight

.30 lbs. (135 g)

Certifications

FCC, CE,

Hello! I've thoroughly reviewed the datasheet for the Brickcom BP-1000 Battery Power Pack. This document details a battery-embedded PoE splitter designed for IP surveillance cameras, capable of providing uninterrupted power and ensuring continuous recording during outages. It covers specifications, features like PoE compliance and wall-mountability, and its integration with Edge Recording. Feel free to ask me any questions you have about its functionality, specifications, or use cases!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

Battery-embedded for uninterrupted power
IEEE 802.3af PoE compliant
Provides up to 30-40 minutes backup power
Supports both PoE and DC 12V input
LED indicators for power status
Plug & Play installation
Wall-mountable design
Enables uninterrupted recording with Edge Recording

Frequently asked questions

The BP-1000 can continue supplying power for up to 30 minutes. For specific devices like the WCB-100Ap, it can support up to 40 minutes based on its power consumption.

The BP-1000 can be powered through an 802.3af PoE cable or a DC 12V 1A cable.

It is a battery-embedded PoE splitter designed for IP surveillance cameras, separating power and data from a Power over Ethernet cable and providing backup power during interruptions.

When combined with Brickcom's PC-NVR's "Edge Recording" function, the BP-1000 supplies power while recording video is stored on the network camera's memory card, then delivered to the PC-NVR automatically once services are restored.

The BP-1000 measures 2.87 × 2.13 × 0.94 inches (73 × 54 × 24 mm).