advertisement
MDA5000 Digital/Analog Converter
Owners
Manual
, HDCD
®
, High Definition Compatible Digital
®
and Pacific
Microsonics are either registered trademarks or trademarks of Pacific
Microsonics, Inc. in the United States and/or other countries.
HDCD System manufactured under license from Pacific Microsonics, Inc.
This product is covered by one or more of the following: U. S. Patent No.
5,479,168, 5,638,074, 5,640,161, 5,808,574, 5,838,274, 5,854,600,
5,864,311, 5,872,531, and Australia Patent No. 669,114 with other patents pending.
MDA5000
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549
WARNING - TO REDUCE RISK OF
FIRE OR ELECTRICAL SHOCK, DO
NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
To prevent the risk of electric shock, do not remove bottom cover. No user serviceable parts inside.
IMPORTANT SAFETY INSTRUCTIONS!
PLEASE READ THEM BEFORE OPERATING THIS EQUIPMENT.
General:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Warning: To reduce risk of fire or electrical shock, do not expose this equipment to rain or moisture.
This unit is capable of producing high sound pressure levels. Continued exposure to high sound pressure levels can cause permanent hearing impairment or loss. User caution is advised and ear protection is recommended when playing at high volumes.
6. Disconnect this equipment when unused for long periods of time.
7. Only use attachments/accessories specified by the manufacturer.
Installation:
8. Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
9. Do not install near any heat sources such as radiators, heat ducts or other equipment that produce heat.
10. Do not use this equipment near water.
11. Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids are placed on the equipment.
12. Do not mount this product with an unstable bracket as the equipment may fall, causing serious injury to a person, and serious damage to the product.
Care of Equipment:
14. Clean only with dry cloth.
15. Do not permit objects or liquids of any kind to be pushed, spilled and/or fall into the equipment through enclosure openings.
Repair of Equipment:
16. Refer all servicing to qualified service personnel. Servicing is required when the equipment has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the equipment, the equipment has been exposed to rain or moisture, does not operate normally, or has been dropped.
17. Do not attempt to service beyond that described in the operating instructions. All other service should be referred to qualified service personnel.
18. When replacement parts are required, be sure the service technician has used replacement parts specified by
McIntosh or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
19. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
Connection:
13. Route DC power cords so that they are not likely to be pinched by items placed upon or against them, paying particular attention to the point where they enter the instrument.
2
Thank You
Your decision to own this McIntosh MDA5000 Digital/
Analog Converter ranks you at the very top among discriminating music listeners. You now have The Best. The
McIntosh dedication to Quality, is assurance that you will receive many years of musical enjoyment from this unit.
Please take a short time to read the information in this manual. We want you to be as familiar as possible with all the features and functions of your new McIntosh.
Please Take A Moment
The serial number, purchase date and McIntosh dealer name are important to you for possible insurance claim or future service. The spaces below have been provided for you to record that information:
Serial Number:
Purchase Date:
Dealer Name:
Technical Assistance
If at any time you have questions about your McIntosh product, contact your McIntosh dealer who is familiar with your McIntosh equipment and any other brands that may be part of your system. If you or your dealer wish additional help concerning a suspected problem, you can receive technical assistance for all McIntosh products at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-1545
Fax: 607-723-3636
Customer Service
If it is determined that your McIntosh product is in need of repair, you can return it to your dealer. You can also return it to the McIntosh Laboratory Service Repair department.
For assistance on factory repair return procedure, contact the McIntosh Repair Department at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3515
Fax: 607-723-1917
Copyright 2001 ã by McIntosh Laboratory, Inc.
Table of Contents
Safety Instructions ............................................................. 2
Thank You.......................................................................... 3
Please Take a Moment ....................................................... 3
Customer Service............................................................... 3
Table of Contents ............................................................... 3
Introduction ....................................................................... 4
Performance Features ........................................................ 4
Dimensions ....................................................................... 5
Installation ........................................................................ 6
Side Panel Connections ..................................................... 7
How to Connect ................................................................. 8
Top Panel Displays ............................................................ 9
Specifications .................................................................. 10
Packing Instruction .......................................................... 11
General Notes
1. The MDA5000 Digital/Analog Converter Operation is fully
Automatic and requires no selection or adjustment on the part of the user. When a CD that has been specially encoded with a High Definition Compatible Digital
®
Signal is received, the
MDA5000 will automatically decode the additional information.
2. For additional connection information, refer to the owners manual(s) for any component(s) connected to the MDA5000
Digital/Analog Converter.
3. The MDA5000 Digital/Analog Converter is designed to
Automatically Switch Power On and Off with the rest of the
Audio System. In order for the automatic power switching to function, there needs to be a connection between the Control
Center and the Converter.
4. An Automatic Digital Input Selector is built into the
MDA5000 . It will accommodate up to three source devices with digital outputs to be connected to the converter. The
MDA5000 can only decode one input source at a time. If the
MDA5000 receives more than one digital signal simultaneously, the Automatic Digital Input Selector will not function properly.
, HDCD
®
, High Definition Compatible Digital
® and Pacific Microsonics are either registered trademarks or trademarks of Pacific Microsonics, Inc. in the United States and/or other countries.
HDCD System manufactured under license from Pacific
Microsonics, Inc. This product is covered by one or more of the following: U. S. Patent No. 5,479,168, 5,638,074,
5,640,161, 5,808,574, 5,838,274, 5,854,600, 5,864,311,
5,872,531, and Australia Patent No. 669,114 with other patents pending.
3
4
Introduction
Now you can take advantage of traditional McIntosh standards of excellence in the MDA5000 Digital/Analog Converter. The built-in HDCD
®
Circuitry with Eight Time
Over-Sampling provides the ultimate performance from
Compact Discs. The MDA5000 reproduction is sonically transparent and absolutely accurate. The McIntosh Sound is The Sound of the Music Itself.
Performance Features
·
HDCD ® Decoder with 24 Bit 8 Times Over-Sampling
Digital Filter
The MDA5000 is equipped with a powerful 24 Bit digital signal processor. This digital signal processor can provide automatic HDCD decoding and 8 times over sampling digital filter function for both CD and HDCD. The HDCD decoder provides a wider dynamic range when the HDCD disc is used.
·
HDCD
®
Indicator
The MDA5000 is equipped with a HDCD Indicator. The indicator will be lit when the HDCD Digital Audio Signal is present at input.
·
Selected Grade 24 Bit Digital-to-Analog Converter
The MDA5000 is equipped with a selected grade 24 Bit
Digital-to-Analog Converter per channel. This advanced
Digital-to-Analog Converter can provide low-distortion, low-noise and high fidelity sound.
·
Digital Interface Receiver
The MDA5000 is equipped with a low jitter clock recovery digital interface receiver. A very clean recovered clock from the incoming signal is used in the converter to maintain the sound quality.
·
Two Coaxial and One Optical Digital Audio Input with Automatic Switching
The MDA5000 has two coaxial and an optical digital audio input. All inputs are monitored continuously and switched automatically.
·
Gold Plated Terminals
McIntosh provides gold plated input and output terminals on the MDA5000 for superior corrosion resistance.
·
Superior Construction
The famous McIntosh Design, an Illuminated Glass Top
Panel together with a Extruded Aluminum Chassis help to insure superior performance and long term reliability which is very important in the automotive environment.
Dimensions
The following dimensions can assist in determining the best location for your MDA5000. There is additional information on the next page pertaining to installing the
MDA5000 into your vehicle.
Top View of the MDA5000
10-
11/16
"
27.15cm
2-
11/16
"
6.83cm
2-
11/16
"
6.83cm
Dimensions
11-
7/8
"
30.16cm
12-
1/2
"
31.75cm
5-
5/16
"
13.01cm
Side View of the MDA5000
11"
27.93cm
11/32
"
1.09cm
2-
15/16
"
7.49cm
5
Installation
Installation
It is recommended that a professional who is skilled in all aspects of installation and operation install the MDA5000 and any associated mobile audio equipment.
Converter Ventilation
Always provide adequate ventilation for the MDA5000 and be sure to provide at least 1 inch clearance at the sides with the fins.
The Digital/Analog Converter can be mounted vertically or horizontally and may be located under a seat if adequate clearance is available. The preferred installation method is to mount it directly to the vehicle frame using the hardware supplied with the MDA5000.
It is not recommended that the Digital/Analog Converter be mounted under the hood or in a location where it will be directly exposed to the elements.
Removing the Glass Panel
To access the MDA5000 Terminal Block Connections, remove the glass panel by removing the four hex bolts with the supplied 3/32 hex key. See figure 1. Attach the supplied suction cup to the top center of the glass panel and carefully raise it high enough to put your hand under. Temporarily place the removed glass panel in a safe place; remove the suction cup and save it for future use.
Removing the End Cap
To access the MDA5000 Connecting Terminal Block, remove the Glass Panel first (the above step) and then remove the Phillips Screws holding the Left Side End Cap of the Digital/Analog Converter and lift the End Cap off. See figure 2.
Figure 1
Figure 2
Remove Top Cover Screws
Remove Top Cover Screws
Remove End Cap Screw
Remove End Cap Screw
6
Side Panel Cooling and Connections
AUDIO OUTPUTs
Analog Signal Output for connection to a
Control Center
Connect to the Negative (-) vehicle battery terminal
Connect to the positve (+) vehicle battery terminal
Receives the Turn-ON Signal from a
McIntosh Control Center and sends a Turn-ON Signal on to another component in the Audio System
COAXIAL DIGITAL
AUDIO INPUTs for cables from a CD Signal
Source Digital Output
OPTICAL DIGITAL AUDIO
INPUT for a cable from a CD
Signal Source Digital Optical
Output
7
How to Connect
How to Connect
The McIntosh MDA5000 is intended to be utilized in an
Audio System that can support a separate outboard Digital to Analog Converter.
1. Connect a wire from the Control Center Amp On to either MDA5000 ON Connectors on the left side of the Digital to Analog Converter.
Note: All cables should be connected to the Digital to
Analog Converter before connecting the DC power
McIntosh Control Center
cables to the battery. The second ON Connector provides the Power On Signal for another component in the Audio System.
2. Using the Optical Cable that was supplied with the CD
Player, connect it from the CD Players Digital Optical
Output to the MDA5000 OPTICAL DIGITAL AUDIO
INPUT (3).
Note: An optional connection method is to use one of the
COAXIAL DIGITAL AUDIO INPUT (1 or 2) connectors.
3. Connect an Audio Cable from the MDA5000 AUDIO
OUTPUTs to the Control Center Analog CD Input.
4. Connect the MDA5000 to the vehicle battery terminals with the DC power cable, being careful to observe the correct polarities.
Amp ON
Left Channel CD Analog Input
Right Channel CD Analog Input
8
McIntosh CD Player
-
Vehicle
Battery
+
LED lights when the MDA5000 is receiving a HDCD
®
Digital Audio Signal
Top Panel Display
9
Analog Audio Specifications
Output Voltage
3.2 (±0.1)Volts RMS (CD Mode)
6.4 (±0.2) Volts RMS (HDCD Mode)
Total Harmonic Distortion
0.005% (1,000Hz)
Dynamic Range
Better than 98dB (1,000Hz)
Frequency Response
+0, -0.5dB from 20Hz to 20,000Hz
A-Weighted Signal To Noise Ratio
Better than 110dB
Channel Separation
Better than 105dB (1,000Hz)
Output Impedance
600 ohms
Digital Audio Specifications
Digital to Analog Conversion
24 bit
Digital Filter
8 Times Over Sampling
Sampling Frequency
44,100Hz
Analog Filter
2nd Order Butterworth Filter
Digital Inputs (Digital Audio Interface Format)
Coaxial 0.25V p-p/75 ohm (Inputs 1 and 2)
Optical (Input 3)
Specifications
General Specifications
Power Requirements
14 Volts DC (10.8V to 15.6V allowable), 0.65 Amps
Overall Dimensions
10-11/16 inches (27.15cm) wide, 3.0 inches
(7.6cm) high, 12-1/2 inches (31.75cm) depth
Weight
9.3 pounds (4.2Kg) net, 12.4 pounds (5.6Kg) in shipping carton
10
Packing Instructions
Packing Instructions
In the event it is necessary to repack the equipment for shipment, the equipment must be packed exactly as shown below, failure to do so will result in shipping damage.
Make sure that the Top Glass Panel is firmly secured to the chassis using the supplied hex head screws.
Use the original shipping carton and interior parts only if they are all in good serviceable condition. If a shipping carton or any of the interior part(s) are needed, please call or write Customer Service Department of McIntosh Laboratory. Please see the Part List for the correct part numbers.
Quantity Part Number Description
1
2
034143
034132
Shipping carton only
End cap (Foam pad)
11
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, NY 13903
McIntosh Part No. 040767
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement