co
FUJITSU
FUJITSU THERMAL PRINTER
FP-1000
Fujitsu Standalone Thermal Printer, FP-1000, achieves high reliability
and good cost-efficiency for POS system Receipt printing and Order
printing in commercial kitchens.
@ High speed 180mm/s & High throughput @ Horizontal & Vertical Use
@ High reliability mechanism @ Built-in Power supply model available
@ Small footprint @ Easy-to-use Installer & Utility
@ Cost saving mode @ Fujitsu Super Green Product & RoHS compliance
@ Kitchen printer functions
shaping tomorrow with you
Printing Technology
Print Resolution
Printing Speed
Paper Feed-out Direction
Cutter Method
Installation Direction
Paper Paper width
Outer Diameter of Roll Paper
Paper Thickness
Maximum 58mm with paper
Print With
Font size and Column
80mm with paper
Body Face
Paper with y
58mm
Letter Face
Body Face
Paper with и
80mm
Letter Face
Character Sets
Barcode Barcode
Two dimensional code
Receive Buffer
Logo Store Memory
Paper Near End & Paper End
Internal Buzzer
Dual (RS232C+ USB)
LAN
Software Interface
Interface
Drawer Interface
Software Printer Windows
Driver
Linux
Printer Utility
LAN Utility
RELIABILITY MCBF(Mean-cycle-
between-failure)
Print Head
Cutter Life
Power Requirements
Power Consumption
Ambient Temperature
Relative Humidity
Dimensions
Weight (without the packing box)
Cover Color
Option
*1 When using printer vertically, connectors of AC cable and Interface cable should be under the printer case. (The connector of AC Cable should be “Angled” shape.)
gl LUV Sd e ES
Direct Line Thermal Method
8 dot/mm (0.125mm/dot) 203dpi
Maximum 180mm/s (Monochrome only)
Top feed out
Partial cut
Two ways (Horizontal / Vertical) *1
80mm, 58mm,
®83mm Maximum
65pm - 85pm
48mm (384dots) or 52.5mm (420dots)
64mm (512dots) or 72mm (576dots)
Font A (Column)
12x24 (32 or 35)
11x22 (32 or 35)
12x24 (42 or 48)
11x22 (42 or 48)
203dpi(Normal Mode)
Font B (Column)
10x24 (38 or 42)
9 x24 (42 or 46)
9x17 (38 or 42)
9 x17 (42 or 46)
10x24 (51 or 57)
9 x24 (56 or 64)
9x17 (51 or 57)
9x17 (56 or 64)
Font C (Column)
8x16 (48 or 52)
8x13 (48 or 52)
8x16 (64 or 72)
8x13 (64 or 72)
Approx. 180dpi (EXtended Mode)
Font A (Column)
12x24 (32 or 35)
12x24 (32 or 35)
12x24 (42 or 48)
12x24 (42 or 48)
Font B (Column)
10x24 (38 or 42)
9 x24 (42 or 46)
9x22 (38 or 42)
9 x22 (42 or 46)
10x24 (51 or 57)
9 x24 (56 or 64)
9x22 (51 or 57)
9 x22 (56 or 64)
ANK(95 char.), International Character(48 char.), Enlarged Graphics(128 char. x
Download Character(95 char.),
UPC-A, UPC-E, JAN13(EAN), JAN8(EAN), CODE39, ITF, CODABAR(NW-7), CODE93,
CODE128
QR code
Max. 4KB
Max. 576KB
Available
20 pages),
Available to notice errors and printer status
RS232C Serial + USB(2.0 Full-speed)
Wired, 10BASE-T/100BASE-TX
ESC/POS emulation
2 Drawers Controllable
Windows Server® 2008 R2, Windows® 7, Windows
Server® 2008, Windows Vista®, Windows Server® 2003,
Windows® XP, Windows® 2000
Windows Embedded for Point of Service (WEPOS)
JavaPOS driver (Ver.1.10) *3 Linux SuSE9.3
Software to set the printer's setup items
Quick Setup
PR-PortManager (Popup Status Monitor)
Windows driver
OPOS driver (Ver.1.13)
JavaPOS driver (Ver.1.10) *3
Admin Manager(Printer Status Monitor, System Status Monitor, IP Address Setup)
60million Lines *2
100km *2
1.5 million times of partial cut (Recommended Normal paper use) *2
DC Input: +24VDC+10% AC Input: 100 - 240V, 50/60Hz, Single Phase
During standby Dual Interface:3W or less, LAN Interface:4.5W or less
Average during operating 38W or less, Maximum 150W or less
Operation guarantee: 0 °Cto 40°C Print quality guarantee: 5 °C to 35°C
Operation guarantee: 10 % RH to 95% RH Print quality guarantee: 10 % RH to 85% RH
- Standard Model: 144(W)x184(D)x120(H)mm, 5.7 (W)x7.2(D)x4.7 (H) inch
- Built-in Power Supply model: 144 (W)x184(D)x165(H)mm, 5.7 (W)x7.2 (D)x6.5(H) inch
Standard Model: 1.2kg, Built-in Power Supply model: 1.7kg
Black 8: White
Splash-proof cover, Wall hanging bracket
Standard Model
*2 Operation condition is under 500 transactions/day(1transaction=25LF + 1cut), 340days/year, print duty less than 9%, and the life of Head or Cutter with using specified paper by our
company. If unspecified paper is used, the life of printer might be shortened than expected. Also, it might cause trouble for the printer.
*3 JavaPOS Driver supports RS232C Interface and USB Interface
All specifications are subject to change without notice.
У
|
Е
' E
| =
A |
E
=
[Te
184mm
< >
Built-in Power Supply Model
i
E
' E
=
N A
E
=
IT 3
Fu У
184mm
| JMI-0046
FUJITSU ISOTEC LIMITED.
Printer Business Division
135,Higashinozaki,Hobara-machi,Date-shi,Fukushima
960-0695, JAPAN.
Phone : (81-24)574-2236 Fax: (81-24)574-2382
URL : http://jp.fujitsu.com/group/fit/en/
Contact E-mail : [email protected]
FIT February 2011, Rev.01
Basic Performance
O High Speed print 180mm/s
Printing speed of FP-1000 is the highest in its price range. A, A
This is achieved through our advanced mechanical design technology. У ‘
@ Throughput Enhancement
Optimum driver/firmware technology and High Comparison of throughput with other
speed paper feed mechanism enhances the companies
throughput. -
This nobles customers not to waste time. (Time from the start of data transfer to the completion of print)
fs — E
High Reliability Mechanism FP-1000
A Company — 40sec
FP-1000 passes the severe quality assurance |
tests, and ensures longevity with consistent B Company I 4.3sec
print quality. The reliability is proven by the n E |
achievement of 1S09001. JMI-0046 C Company \ e
Auto Cutter Life 1.5 million cuts Print condition: Windows XP,USB Interface,
Thermal Head Life 100km 150mm Receipt length with our test pattern
Printer (MCBF) 60million lines
@ Auto Cutter
Auto cutter is included as a standard feature in the FP-1000,
The cutting method is partial cut, where the center tab of @ Simple Setup right out of the box
paper is connected to the next page. This paper tab is
small, and it does not spoil the look even after tearing the Setup is simple and easy. Just drop in a roll of paper,
paper. connect the cable and install the software in the SETUP
DISK.
BM Accessories in the box IM Connect cables
FP-1000 Quick Start Guide Connect the interface cable and AC adapter.
>
Switch on the printer power. )
AC Adapter Vad
+ ‚ J 3
In case that AC Adapter is
sa ST CD
os * User manual
* Driver/Install Software
* Utility Software HB Switch on
Status Monitor
Paper roll for test
externally connected to FP-1000. HDrop-in Paper set
. . Just throw the paper inside the printer, and
HM Driver/Software Installation close the lid. Paper feeding route is opened,
Windows Driver, OPOS Driver and Utility Software can 3 le mes e meme nes ea
be easily installed. Just follow the user guide in
original Installer.
IP address setting in |
Network environment | Fujirsu EZ
« can be quickly and | mim a {в
easily setup with — |
‘ standard LAN setup — a J
tool. Lee
Various Functions
O Running cost can be saved.
Reduced print function of Windows Driver and Top Margin reduced function save your paper. Running cost
and environmental load can be reduced.
Reduced printing | apc | | abc Top Margin 3mm
* 1/4 reduced vertically — a: —.]
* 1/2 reduced vertically — - 1 : — + 3mm
80mm width paper ; : abc — 4
> convert to 58mm '. 22 —
e 70%; — ** Take off each receipt every time after
НН О - — printing in case of 3mm setting.
o Kitchen Printer Functions
FP-1000 has various functions for Commercial Kitchens.
Order receipts can be printed for Ordering systems.
Buzzer beeps when receipt printed. 180 degree rotation
Buzzer is a standard equipment for the notice of | = — - print
order receipt printed. Various functions like Buzzer — БЫ EZ 180 degree rotation print by
On/Off and 5 patterns of beep sound suite versatile — = Windows Driver is available.
restaurant environment. 4 an | You don't need to turn the
EX. You can select different | ==" я — paper up side down when
sound patterns for Foods | ps o a nk es = you use the printer vertically.
and beverages. Sond lz) Lah = mir Gt Ca |
O Splash-proof option
When the printer is set on the Kitchen
counter, Printer can be set vertically with
using optional Splash-proof cover.
O Wall-hanging option
With using Wall hanging
bracket, you can set the
printer on the wall for
saving space in the
kitchen.
Y
O Barcode / 2-Dimension code O Large Logo Store Memory
FP-1000 supports Barcodes and 2-Dimension codes (QR code). Image data can be stored up to 576KB.
You can store several Logo data.
@ Versatile Utility
Printer Setup Utility Status Monitor to Utility for LAN Interface
notice errors
The original tool ensures easy The original tools for network environment
setup changes like fonts, Baudrate Any errors like paper out are well-supported with using Quick Setup
and others. can be notified at once by to set IP address,PR-Port Manager, Admin
pop-up notice. Manager and Popup Status Monitor for LAN.
FE Also, setup from Web Browser is available.
FufiTsu eu mana mn | | Pre io ; | ee er се с TE =
PE —_ x ен уу насти ВОИН НИЕ РИЧИ -
== — ' E === EL Eo pe Emo
de To ana ren, ih Bin ES List tom, œil
Far ba od ar] Sw pd a
Ear
El
Small Footprint
Compact
o p
FP-1000 achieves the compact outline W144xD184xH120mm.
** In case of AC Adapter externally connected. This contributes the small shop
which has a limited space for installation. (-13% compared to our company models,
the smallest among the same class printers.)
@ Easy to store Interface Connector @ Built-in Power Supply
FP-1000 has a recess to store Interface Built-in Power Supply model
Connector under the case. is also available.
This eliminates the space requirement.
It is designed not to protrude from
the backside view of the printer.
Depending on the installation
space, various selection is
available.
o Horizontal/Vertical Use
Depending on using environment, FP-1000 can be set horizontally
or vertically. When using it vertically, printing direction can be rotated 180
Degrees. Paper near end can be detected for both horizontal
and vertical settings.
@ Versatile font size like 180dpi emulation size @ Enhanced Drivers
3 types of Font size such as Font A, B, and C are available. FP-1000 supports Windows® Drivers,
Also, you can flexibly set the font like Extended font with approximately OPOS Drivers and JavaPOS" Drivers.
180dpi size, and select Pitch and Space between characters. (using OPOS
Driver)
O Interface @ Various paper available to print
FP-1000 has two models; Dual (RS232C Serial + USB) FP-1000 enables you to choose various kinds of paper,
Interface and LAN Interface. Print Width 58mm/80mm, Maximum outside diameter ¢83mm,
Paper thickness 65pm~85pm.
Low-impact to Environment
O Super Green Product @ Not containing Hazardous Substances
FP-1000 passes our own severe environmental standard, In addition to RoHS directives in Europe, FP-1000
and it is called "Super Green Product’. The use of complies our own strict standard of Prohibited substance
Recyclable material, Material Label attachment and standard.
Downsizing supports the environment.
SUPER [Elan O Energy Saving
> £ Policy ae EUA FP-1000 complies with the New Energy Star
== Innovation | +=" 6% ce 0 pos Program. (Built-in Power Supply Model)
д», Сгееп
Super green product is the product which complies with
Fujitsu group original severe environmental standard
">
