Protech PDAC3100 D1 Printer User manual

The Protech PDAC3100-D1 is a printer designed for use with embedded systems. It supports a variety of paper sizes and modes, including 2-inch and 3-inch paper, The printer has a built-in cutter and supports various print densities. Users can set printer parameters such as interface, paper mode, compound words, sensor switches, cutter function, print density, and serial port functions. The PDAC3100-D1 can also be used to print logos and update firmware.

PDF
Document
Protech PDAC3100-D1 Printer User Manual | Manualzz

Advertisement

Advertisement

/

Advertisement

Key features

  • 2 inch and 3 inch paper mode

  • Epson emulation

  • Built-in cutter function

  • Selectable print density

  • Firmware upgradable

  • Logo printing capability

  • Serial port configuration

  • Sensor switch settings

  • Compound word support

Frequently asked questions

The PDAC3100-D1 supports 2-inch and 3 inch paper sizes.

Yes, the PDAC3100-D1 printer has a built-in cutter function that can be enabled or disabled through the printer utility.

Yes, you can select the print density from Low, Normal, Dark and Darkest options.

The firmware update manual allows you to upgrade the firmware of the printer.

User questions

M D

Michael M.

How to resolve connecting errors when downloading settings to a printer?

If encountering errors while trying to download settings to the printer, verify the Interface Setting within the PDAC3100-D1 Printer utility. Ensure the correct COM port number and the appropriate baud rate for the connected printer are selected.

Preparing document for printing…
0%