Datasheet
WatchGuard
®
AP100, AP102, and AP200
AP Technology at a Glance
What’s behind the AP100, AP102 and AP200
Best-in-class hardware
WatchGuard’s wireless access points are built using advanced wireless hardware, featuring 2x2 MIMO with dual spatial streams capable of handling data rates up to 600 Mbps.
Ease of management
With unified management tools, administrators can easily manage both their AP devices and XTM appliances from a single console.
Strong security
Features like MAC filtering, client reporting,
Captive Portal technology, 802.1X authentication, and PCI compliant scan and reporting, ensure a strong WLAN security stance.
Simple roaming
WatchGuard AP devices have you covered, with up to 16 SSIDs, and seamless network access when roaming between access points. And with
AP102, WLAN access is available both indoors and outdoors.
Great coverage, low profile
Powerful radios and internal antennas provide broad, reliable WLAN coverage with advanced features like Tx Beamforming, Low Density Parity
Check, Maximum Ratio Combining, Maximum
Likelihood Decoding. Sleek enclosure designs create subtle deployment profiles suitable for any space – both indoors and outdoors.
Flexible deployment options
Power options include Power Over Ethernet
(PoE), A/C adapter, and PoE injector for maximum deployment flexibility. AP200’s plenum enclosure offers safety code compliance for those who need it and AP102’s IP66 rating allows for installation both indoors and outdoors.
Lower TCO
XTM integrated wireless controller technology helps realize big cost savings, with no separate controller hardware costs, no per- AP “seat” charges, and no controller software license fees.
The mass adoption of smart wireless devices like tablets, smartphones and notebooks is driving the BYOD (bring your own device) explosion, putting ever increasing demands on wireless networks. This pressure, coupled with the exponential growth of applications and cloud services available to end-users, means it is now more important than ever to have control of your entire network – both wired and wireless – with best-in-class security, integrated security policies, and increased visibility.
Extend best-in-class UTM security to the WLAN
Protecting against today’s sophisticated blended threats requires multiple security capabilities, and these threats don’t discriminate between a wired or wireless network path to their targets. WatchGuard’s AP100, AP102 and AP200 meet this challenge by extending best-in-class UTM security – including application control, intrusion prevention, URL and web content filtering, virus and spam blocking and more – from the XTM to the WLAN. With the AP100, AP102 and AP200, businesses can harness the power of mobile devices and wireless networking – both indoors and outdoors – without putting network assets at risk.
Integrate wired and wireless security policies
Firebox integrated wireless controller technology combined with WatchGuard’s
AP100, AP102 and AP200 wireless access points allow users to easily apply security policies to wired and WLAN resources simultaneously , which is critical to enforcing security standards across the entire network infrastructure. And updating integrated policies couldn’t be simpler – creating huge IT time and cost savings.
Unified device management
Unified device management tools offer a “single pane of glass” view into network security activities and allow users to configure and manage their AP100, AP102 and
AP200 wireless access points and XTM devices from one place – reducing both setup time and maintenance costs.
WatchGuard® Technologies, Inc.
AP100, AP102 and AP200 Technical Specifications
AP100 AP102 AP200
Hardware Details
Environmental Information
AP100/AP200
Deployment Indoor
Indoor/Outdoor
(IP66 rated)
Indoor (Plenum)
Operating Temperature 32 to 104 ˚F (0 to 40 ˚C)
Number of Radios 1 1 2
Operating Relative Humidity
5%-90% Noncondensing
Frequency of Radio 1
2.4 GHz or 5 GHz
(selectable)
2.4 GHz or 5 GHz
(selectable)
5 GHz
Storage Temperature
-40 to 158 ˚F (-40 to
70 ˚C)
Frequency of Radio 2 - - 2.4 GHz Non-Operating Relative Humidity
5%-90% Noncondensing
Frequency Bands (GHz)*
2.400-2.474GHz, 5.150-5.250GHz, 5.250-5.350GHz, 5.470-
5.725GHz, 5.725-5.850GHz
AC Power Adapter
Input Voltage 100 - 240V
Number of Antennas
2 internal, omnidirectional
2 internal, horizontal (120˚)
4 internal, omnidirectional
Frequency 50/60Hz
Peak Antenna Gain 3 dBi 6 dBi 4 dBi
Input Current Maximum 400mA
Output Voltage
Tx/Rx Streams 2x2 MIMO with 2 spatial streams
12V
Output Current 1250mA
Maximum TX Power* 20 dBm 20 dBm 21 dBm
PoE Injector (optional)
Maximum Data Rate 300 Mbps 300 Mbps 600 Mbps
IEEE Standard 802.3af
SSID 8 8 16 Input Voltage 100 - 240V
Clients (Max/Suggested) No Limit/30 No Limit/30 No Limit/60 56V
Security Settings
WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK (Mixed), WPA-
802.1X (Enterprise) WPA2-802.1X (Enterprise) WPA-802.1X/
WPA2-802.1X (Mixed), TKIP, AES, TKIP/AES, Captive Portal,
MAC whitelist/blacklist, VLAN Tagging
Output Voltage
Output Power
Dimensions
15.4W
Ethernet
Power over Ethernet (PoE)
A/C Adapter Included
1 x 1 Gbe
802.3af/at
Optional Included
Product Dimensions
Shipping Dimensions
6.5”RD x 1.75H
(16.5 x 4.4 cm)
7” x 7.25” x 4.5”
(17.8 x 18.4 x 11.4 cm)
.75 lbs (.34 kg)
PoE Injector
Physical Security
MTBF
IEEE Standards Supported
Optional
Kensignton Lock
Optional
-
> 500,000 Hours
Optional
Kensignton Lock
802.11a/b/g/n, 802.1i, 802.1q, 802.1X, 802.3af/at
Product Weight
Shipping Weight (includes A/C adapter, mounting kit, etc.)
Mounting Options (included)
Certifications
Wireless
Safety
2 lbs (.91 kg)
Wall/Ceiling
FCC, IC, CE
NRTL/C, CB, CE
802.11n Features
Tx Beamforming, Low Density Parity Check, Maximum Ratio
Combining, Maximum Likelihood Decoding
Weather Proof None
Support and Maintenance
1-year or 3-year subscription to Live Security® Service for hardware warranty with advance hardware replacement technical support, software updates - included with purchase
* Country Specific Restrictions Apply
Control of Hazardous Substances WEEE, RoHS, REACH
AP102
To learn more about the WatchGuard AP100, AP102 and AP200, contact your
WatchGuard reseller, or visit us at www.watchguard.com/AP
AP100 and AP200
Reset
Button
Ethernet
Connector AC Power
LEDs
AP102
-4 to 131 ˚F (-20 to
55 ˚C)
5%-90% Noncondensing
-40 to 158 ˚F (-40 to
70 ˚C)
5%-90% Noncondensing
100 - 240V
50/60Hz
400mA
12V
1250mA
802.3af
100 - 240V
56V
15.4W
6.3” x 6.3” x 1.75”
(16.2 x 16.2 x 4.5 cm)
7.8” x 7.4” x 2”
(19.8 x 18.8 x 5.2 cm)
.66 lbs (.30 kg)
1.4 lbs (.65 kg)
Wall/Pole
FCC, IC, CE
NTRL/C, CB, CE
IP66
WEEE, RoHS, REACH
Kensington
Lock
LEDs
Network and power connectors under protective plate
U.S. SALES: 1.800.734.9905 INTERNATIONAL SALES: +1.206.613.0895 WEB: www.watchguard.com
No express or implied warranties are provided for herein. All specifications are subject to change and expected future products, features or functionality will be provided on an if and when available basis. © 2014 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard logo, Firebox, Fireware, and LiveSecurity are registered trademarks of WatchGuard Technologies, Inc. in the United States and/or other countries. All other tradenames are the property of their respective owners. Part No. WGCE66797_100114