advertisement
TP-POE-xx-WP
DATA SHEET
Wall Plug POE Injectors
Features
Remotely Power Equipment thru CAT5 Cable up to 100m
Autoranging Switching Power Supply: 100-240VAC
Short Circuit, Over Current and Over Voltage Protection
Powerful 24W Passive POE Output
CE Certified, Meets RoHS Requirements
Compact size
– Convenient Wall Plug Design
Applications
Wireless Access Points and Client Devices
IP Phone and Security Camera Systems
TP-POE-xx-WP Medium Power
Description
The TP-POE-xx-WP Power Over Ethernet Power Sources are a low cost Passive POE inserter/injector compatible with a wide variety of passive POE powered devices. They are midspan devices, which means there is a data-in port and an output port with data and power. The RJ45 connectors are shielded so that the CAT5 cable shielding path is not interrupted between the data source (computer, router or switch) and the device being supplied with POE power. The small size and convenient wall plug design helps keep the installation simple and clean. The low cost makes them very affordable.
They work by supplying power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). The
Ethernet spec supports distances up to 100m (328 feet).
The units are autoranging so that they accept AC inputs from 90VAC to 264VAC (50/60 Hz) and they supply regulated DC Voltage at the POE output. They have various protections for short circuit, overload and overvoltage.
They have power output of up to 24W. They are available in 15V, 24V and 48V DC Output with load regulation within
5%. They have an LED to indicate power on.
Device Pinouts
RJ-45 Input (Data Only)
Pin Symbol
1 RX+
5
6
7
8
2
3
4
RX-
TX+
NC
NC
TX-
NC
NC
Description
Data Receive(+)
Data Receive(-)
Data Transmit(+)
No Connection
No Connection
Data Transmit(-)
No Connection
No Connection
RJ-45 Output (Data & Power)
Symbol
RX+
RX-
TX+
+Vdc
+Vdc
TX-
-Vdc
-Vdc
Description
Data Receive(+)
Data Receive(-)
Data Transmit(+)
DC power(+)
DC power(+)
Data Transmit(-)
DC power(-)
DC power(-)
Page 2
General Specifications
AC Input
Max Inrush Current
(120VAC)
Input Current
Efficiency
Line / Load Regulation
Ripple / Noise
Turn-On Delay
Rise Time
Protections – Auto Recover
Safety and EMC Standards
Environmental Standards
Operating Temperature
Operating Humidity (RH)
Storage Temperature
Case Dimensions
Weight
AC Plug Type
Network Connector Type
POE Type
Notes:
All shipments F.O.B. Bluffdale, UT 84065
Tycon Power Systems Power Sources carry a 1 year warranty
System Ordering:
Product
Selector
POE Output Voltage
(+/- 2.5%)
TP-POE-15-WP
TP-POE-24-WP
TP-POE-48-WP
15V
24V
48V
For further information contact:
Tyconpower.com
90-264VAC 47-63Hz
30A
1A
80% Min
3% / 5%
200mV p-p
2 Seconds Max
40 mS Max
Over-Voltage, Short Circuit, Over-Current
CE
RoHs
-10 to +40°C (14 to +104°F)
5% - 90%
-20 to +85°C (-4 to +185°F)
83 x 44.5 x 34.3 mm (3.25 x 1.75 x 1.35”)
114g (4 oz)
North American
RJ45 Shielded
Passive POE ( Pins 4,5 V+, Pins 7,8 V-)
Output Current
1.5A
1A
0.5A
TP-POE-xx-WP
Output Power
22.5W
24W
24W
14641 S 800 W Ste A
Bluffdale, UT 84065
PH: 801-432-0003
FAX: 801-618-4220
TP-POE-xx-WP Spec Rev 2 17-Dec-13 Specifications Subject to Change Without Notice
advertisement
Related manuals
advertisement