advertisement
OE14-502
July 2015
HIGH DEFINITION COLOUR ZOOM CAMERA
High definition colour inspection camera
Multi-standard video capability
10:1 optical zoom lens
The Kongsberg Maritime OE14-502 Underwater HD
Camera is designed and priced to be used for all general purpose ROV inspection tasks. Video output is available as Component (Y, Pb, Pr) and HD-SDI on coax or fibre connectors (Single or Multi-mode). CWDM alternative wavelengths are also available. It is possible to easily switch to high resolution composite video output if HD is not required for certain tasks.
The OE14-502 is a multi-standard camera with the ability to change video formats by IR remote control (RC) or by
GUI.
Long line drive can be set by RC or GUI and allows the component signal to drive three matched coax cables with no degradation over three hundred metres. In addition to full control of the camera using the GUI, white balance can be set to 3,200K, 5,600K or to auto tracking and back light compensation can be switched on or off using the remote control.
A domed water compensated port and optical zoom provide a close-up inspection capability combined with the flexibility of a 10x magnification for powerful stand off inspections.
The unique Kongsberg Maritime IR remote control also allows camera control set-up. Camera control can be single wire (tri-state), two wire (bi-polar), USB, RS485 and RS232.
The inclusive Kongsberg Maritime Graphical User
Interface (GUI) provides control functionality via the serial link.
Applications
Marine Science
Manned Submersible
HD and SD High End Inspection
TECHNICAL SPECIFICATIONS
Performance
Horizontal Resolution
Light Sensitivity
Minimum Scene Illumination
Signal to Noise Ratio
Electrical
Scan Standard
Sensor Elements
Video Output
Power Input
Control
Optical
Lens
AOV in water
Iris Control
Focus Range
800 TVL/PH
100 mV video at 140 x 10 -3 lux faceplate
350 mV video at 1 lux faceplate
2 lux
>56 dB (weighted)
1080i / 720p, 50 fps
1080i / 720p, 59.94 fps
PAL / NTSC VBS Composite Video
1920(H) x 1080 (V)
HD-SDI over coax, HD-SDI over fibre (SM,MM, CWDM), Component
(Y,Pb,Pr), PAL and NTSC composite video
16 to 24 V dc, 850mA (max)
Single wire (tri-state), RS232, RS485, USB (user selectable via IR remote)
5.1mm to 51mm, F1.8
10x Optical Zoom
Horizontal: 45°
Vertical: 29°
Diagonal: 50°
Automatic (Manual using the GUI)
Front port to infinity (at wide angle)
800mm to Infinity (at narrow angle)
Mechanical
Dimensions
Weight
Housing Material
Connector
Environmental
Operating Depth
Temperature
Shock
Vibration
Electromagnetic Compatibility
Features
White Balance
Back Light Compensation
Diameter: 95mm
Length: 222.5mm (excl. connector and bump guard)
In air 3.2Kg, in water 1.6Kg
Titanium Alloy, 6AL/4V ASTM B3 48
Configuration dependant
4,500 msw
Operating: -5 to 40°C, Storage: -20 to 60°C
30G peak acceleration, 25ms half sine duration
10G, from 20 to150Hz in all three axes
BS EN 61000-6-3: 2007 and BS EN 61000-6-1: 2007
Auto, 3,200K, 5,600K selectable through GUI or IR remote
Switch on and off using the GUI or IR remote
Specifications subject to change without any further notice
KONGSBERG MARITIME
Telephone: +44 1224 226500
E-mail sales: [email protected]
E-mail support: [email protected]
www.km.kongsberg.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement