iDJ2GO
QUICKSTART GUIDE
ENGLISH ( 3 – 4 )
GUÍA DE INICIO RÁPIDO
ESPAÑOL ( 5 – 6 )
GUIDE D’UTILISATION SIMPLIFIÉ
FRANÇAIS ( 7 – 8 )
GUIDA RAPIDA
ITALIANO ( 9 – 10 )
KURZANLEITUNG
DEUTSCH ( 11 – 12 )
SNELSTARTGIDS
NEDERLANDS ( 13 – 14 )
BOX CONTENTS
iDJ2GO
iPad Stand
Quickstart Guide
Safety and Warranty Information Booklet
REGISTRATION
Please go to http://www.ionaudio.com to register your iDJ2GO. Registering your product ensures that we can keep
you up-to-date with any new product developments and provide you with world-class technical support, should you
run into any problems.
COMPATIBLE iOS DEVICES
iDJ2GO is compatible with the following iOS devices (not included):
•
•
•
•
•
•
•
iPad 2®
iPad®
iPhone 4S®
iPhone 4®
iPhone 3GS®
iPod touch® (4th generation)
iPod touch® (3rd generation)
SETUP
Before you can begin using iDJ2GO with your iPad, iPhone, or iPod touch, you must first install
either the free iDJ2GO app or Algoriddim’s djay app from the App Store.
For iDJ2GO App:
1.
Open the App Store on your iPad, iPhone, or iPod touch (not included) and download the iDJ2GO app.
2.
Tap 'Install' or 'Install App'. It is not necessary to launch the app at this time.
3.
Connect iDJ2GO to the 30-pin port on the iPad, iPhone, or iPod touch using iDJ2GO’s hard-wired 30pin cable.
4.
Launch the iDJ2GO app.
5.
Press Load A on the iDJ2GO controller to navigate through your iTunes music library and choose the
song to load to Deck A. Press Load B on the iDJ2GO controller to navigate through your iTunes music
library and choose the song to load to Deck B.
6.
Start DJ’ing!
Important note: To use the iDJ2GO app, you must close all other apps. To do this:
1)
Go to the main screen of your iOS device.
2)
Double-click the Home button. A bar will appear at the bottom of the screen, showing an
icon for any app that is currently running. (If the bar contains no icons, skip to Step 5.)
3)
Hold your finger on an app icon until the icon shakes.
4)
Press the red circle in the upper left corner of each app to close it. When all apps are
closed, there should be no more icons in this bar.
5)
Press the Home button once to return to the main screen.
For Algoriddim’s djay app:
1.
Open the App Store on your iPad, iPhone, or iPod touch (not included) and download Algoriddim’s djay
app.
2.
Tap 'Install' or 'Install App'. It is not necessary to launch the app at this time.
3.
Connect iDJ2GO to the 30-pin port on the iPad, iPhone, or iPod touch using iDJ2GO’s hard-wired 30pin cable.
4.
Launch Algoriddim’s djay app.
5.
Start DJ’ing!
iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the US and other countries.
3
FEATURES
1
15 14
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
5
8
6
2
13 12
1.
4
9
16
11
8
3
9
7
10
11
16
14 2
15
13 12
30-PIN DOCK CONNECTOR – This 30-pin port provides power to an iPad, iPhone, or iPod touch
(using the included hard-wired 30-pin connector cable) and supports CoreMIDI for all controls and
parameters of compatible apps.
PFL – Sends pre-fader audio to the Cue Channel for monitoring.
CUE GAIN – Adjusts the audio level of the Cue channel.
MASTER VOLUME – Adjusts the output volume of the Program mix.
BROWSE KNOB – Turn this knob to scroll through lists of tracks and directories in the app.
BACK – This button will take you back to the previous level (folder).
ENTER – When a directory is selected, press the knob to enter it. (Press BACK to move up to the
previous level.)
LOAD A / LOAD B – Press one of these buttons while a track is selected to assign it to Deck A or Deck
B, respectively.
CHANNEL VOLUME – Adjusts the audio level on the corresponding channel.
CROSSFADER – Blends audio playing between Decks A and B. Sliding this to the left plays Deck A
and sliding to the right plays Deck B.
JOG WHEEL – Moving the JOG WHEEL "scratches" on the track on that deck – an effect similar to
moving the platter on a turntable. To engage Pitch Bend Mode, hold the LOAD A / LOAD B button for
two seconds; when the deck is playing, the JOG WHEEL will bend the track's pitch.
PLAY / PAUSE – Starts or resumes playback if the Deck is paused. Pauses playback if the Deck is
playing.
CUE – The CUE button will return and pause the track at the last set cue point. For temporary play of
the cue point, you can hold down the CUE button. The track will play for as long as the button is held
down and will return to the cue point once it has been released. You can hold down CUE and PLAY /
PAUSE simultaneously to start playback from the cue point. Release both buttons to allow playback to
continue.
SYNC – Automatically matches the corresponding Deck's tempo with the other Deck's tempo.
PITCH FADER – Controls the track's playback speed.
PITCH BEND ( + / - ) – Press or hold down either of these buttons to temporarily adjust the track's
playback speed. When released, the track playback will return to the speed designated by the PITCH
FADER.
4
SPECIFICATIONS
•
WEIGHT: 0.8 lbs. / 0.36 kg
•
DIMENSIONS (W x D x H): 12" x 3.2" x 1.3" / 305 mm x 81mm x 33mm
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
15
www.ionaudio.com
MANUAL VERSION v1.4
">
