Data Sheet

Cisco DCM Series D9901

Digital Content Manager MPEG Processor

Today’s digital systems demand powerful, flexible, and compact solutions that will allow the service provider to support new network architectures. The Cisco

®

DCM Series

D9901 Digital Content Manager (DCM) MPEG Processor is a compact 1RU platform capable of processing a high number of MPEG video streams. The DCM Series D9901

MPEG Processor is the next generation of intelligent headend processing equipment where the combination of compactness and flexibility leads to a cost-effective solution.

Based on our experience, the DCM Series D9901 MPEG Processor should bring operational and economic benefits in MPEG processing applications. The optional built-in

DVB scrambler allows easy integration with several Conditional Access (CA) systems.

Figure 1. Cisco DCM Series D9901 MPEG Processor

Physical Configuration

The DCM Series D9901 MPEG Processor comes in a compact 1RU chassis with hot-swappable and redundant power supplies. The unit can be configured with up to two I/O cards, with each card having either a maximum of ten ASI ports or four GbE ports. Additionally, the DCM Series D9901

MPEG Processor can be fitted with up to two co-processor cards or one transcoder card to support advanced video processing functions. The DCM DRD Satellte Reception and Decryption card adds high density DVB-S and DVB-S2 reception capabilities and Common Interface decryption functionality. For receiving off-air ATSC terrestrial signals, the unit can be fitted with a high-density

8-VSB input card. The ASI cards have been designed to support full ASI rates, allowing freedom in system design. All ASI ports can be individually configured as either input or output, and all ASI ports support both MPTS and SPTS streams.

The GbE I/O cards support four GbE ports via SFP connectors, with the card having a total throughput of 2 Gbps in and 2 Gbps out. The GbE ports support MPTS and SPTS streams.

© 2008-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 14

Data Sheet

The co-p rocessor cards’ powerful MPEG content processing cores allow the DCM Series D9901

MPEG Processor to perform content recompression to lower bit rates, support open loop statistical multiplexing, digital program insertion, and scrambling. Because the cards are designed around general purpose FPGAs, the DCM Series D9901 MPEG Processor is prepared to support multiple functions in the future through simple code downloads.

Each 8-VSB input card can simultaneously receive up to eight RF channels and can fully benefit from DCM’s MPEG processing functionality.

The DRD Satellite Reception and Decryption card provides 4 RF inputs for reception of DVB-S and

DVB-S2 signals and 4 DVB-CI common interface slots for descrambling using CAM modules.

Grooming and Remultiplexing

Grooming and remultiplexing of content is only the first step of the DCM Series

D9901’s MPEG processing capability.

The DCM Series D9901 MPEG Processor supports advanced PSI and descriptor handling capabilities. PSI, SI, and PSIP tables can be regenerated and played out, changing dynamically according to input changes and configurations. Integration with Continuum

®

DVP SI-Server allows customized PSI/SI situations to be addressed.

Furthermore, it supports extensive transport stream and program analysis, including program level bit rate measurements on both incoming and outgoing streams. This allows the operator to easily configure the content into logical outgoing program groups. Every version also includes monitoring of many TR 101 290 errors.

The high processing power of the DCM Series D9901 MPEG Processor is designed to meet evolving architectures for certain future applications.

Advanced Video Processing

The DCM Series D9901 MPEG Processor has been designed to provide MPEG processing power for today’s needs as well as anticipated future requirements. The DCM Series D9901 MPEG

Processor supports up to 4 Gbps of input and output capability. Each of the two co-processing cores is capable of transrating, statistically multiplexing, or rate-limiting up to 350 SD streams or 85

HD streams using new IntelliRate Plus advanced transrating technology and algorithms. Each of the cores allow for digital program insertion (ad splicing) on SD streams as well as on HD streams.

Splicing on component level allows for seamless insertion of regional content or advertisements into existing transport streams. In addition to video processing, these cores also enable the DCM

Series D9901 MPEG Processor to perform DVB Simulcrypt compliant scrambling. Functionality of the co-processing cores is enabled via software licenses, allowing the operator to scale the functionality to meet their needs while at the same time reducing the capital expense necessary to meet the system requirements.

MPEG Processing Applications

Designed as an MPEG processing application platform, the DCM Series D9901 MPEG Processor accommodates bandwidth management of several encoder pools using IP-based closed-loop statistical multiplexing. The statistical multiplex controller includes support of the D9036 encoding platform.

The DCM Series D9901 MPEG Processor can also operate as a Digital Transport Formatter (DTF) in which multiple incoming transport streams are combined into a single transport stream, making it

© 2008-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 14

Data Sheet suitable for distributing DVB-T and DVB-H signals for broadcast networks that may operate in an

SFN environment.

Furthermore, using an ASI SFN I/O card in the DCM Series D9901 MPEG Processor offers full

SFN adapter functionality, including insertion of MIP information according to TS 101 191 in any outgoing ASI MPEG transport stream on that card.

The DCM Series D9901 MPEG Processor can also generate a so-called slate service out of a still image picture or clip that is loaded onto the device. The slate service might be used as a dummy service or as a backup program to switch to during a service loss.

Conditional Access

The built-in scrambler allows easy integration with several CA systems. Integrating multiple CA systems at the same time is possible through the Simulcrypt interface. The DCM Series D9901

MPEG Processor also supports BISS-1 scrambling to secure satellite or IP transmission links. It also provides BISS-1 descrambling functionality for remote locations that need to receive BISS-1 encrypted video streams over secured primary distribution links.

Transcoding

Following today’s rapidly growing IPTV channel lineup requirements, the DCM Series D9901

MPEG Processor also performs high-density MPEG-2 to H.264 video transcoding, and is able to support optional audio transcoding from AC-3 and MPEG-1 Layer II to HE-AAC. It is capable of processing a high number of both SD and HD video streams, supporting 1080i and 720p formats at up to full HD resolution. It is designed to support numerous advanced features like closed caption handling, picture-in-picture (PIP), audio, and metadata pass-through. Functionality of the transcoding modules is enabled via software licenses, allowing operators to scale and grow to meet their needs.

Digital Overlays

To address applications like channel branding, message crawls and emergency alerts, the DCM

Series D9901 MPEG Processor allows for insertion of digital overlays such as logos. The DCM

Series D9901 MPEG Processor avoids complex decoding and re-encoding by overlaying and rendering logos that remain in the MPEG domain, resulting in a reduction in cost and complexity for the operator.

ATSC Off-air Reception

The state-of-the art 8-VSB input card allows 4 or 8 RF channels to be received simultaneously depending on the chosen hardware version. Each RF input is licensed and can be configured independently to provide full flexibility.

After reception, each received transport stream can use all other DCM processing functionality and allows operators to build a flexible solution.

Satellite Reception and DVB-CI Descrambling

For digital turnaround distribution applications, the Dense Receiver and Decrypter (DRD) card receives DVB-S and DVB-S2 satellite signals on all inputs simultaneously.

Each of the DVB-CI slots on a card can descramble satellite feeds and programs from any input, including ASI and GbE, allowing a more efficient use of the Conditional Access Modules (CAMs).

© 2008-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 14

Data Sheet

Redundancy and Reliability

The DCM Series D9901 MPEG Processor has been designed to help operators configure highly reliable networks. It supports hot-swappable and redundant power supplies and hot-swappable cooling fans. The DCM Series D9901 MPEG Processor can be configured in a hot 1:1 configuration to support maximum up-time with minimum switch-over interruption. To maximize service availability, the DCM Series D9901 MPEG Processor also offers port, transport stream, and service redundancy.

High-Quality Video Transmission over IP Networks

As IP is becoming more and more the transport network of choice, advanced functionality is required to maximize quality of service. The DCM Series D9901 MPEG Processor

’s extensive set of IP over GbE features, including extensive protocol support and Forward Error Correction (Pro-

MPEG COP3 release 2 / SMPTE 2022 FEC) functionality, allows for seamless integration with these IP networks.

Security Functions

Today’s IP attack profiles cover operating systems, networks, applications, and protocols. These attacks can cause hours or days of downtime, affecting availability of resources and creating serious breaches in data confidentiality and integrity. Depending on the level of the attack and the type of information compromised, the consequences vary in degree from mildly annoying to completely debilitating, and the cost of troubleshooting and recovery can become considerable. To cope with the increased complex and open nature of the IP network environment, the DCM Series

D9901 MPEG Processor is designed with robust and comprehensive security features.

User Interface and Management

The DCM Series D9901 MPEG Processor is controlled via an easy and intuitive GUI. To keep things simple, there is no software to load on the user’s computer. The GUI of the DCM Series

D9901 MPEG Processor is a pure HTML-based user interface that can be opened using Microsoft

®

Internet Explorer 7.0 and 8.0 or Firefox 3.5 and 3.6. The GUI supports simple program provisioning through drag-and-drop functionality. The interface provides detailed information to the user, showing the DCM Series D9901 MPEG Processor configuration, input and output bit rate measurements, transport stream alarms, and other information. Additionally, for easy access to content details, sorting of program information can be performed on various program criteria, including input and output ports, bit rates, and program names. The general-purpose inputs on the chassis also allow for triggering of service backup or digital program insertion.

For integrated network monitoring and control, the DCM Series D9901 MPEG Processor is integrated with ROSA

®

Network Management and Control (NMC) system. All functionality available via the HTML interface is available with the ROSA control system.

© 2008-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 14

Data Sheet

Features

Interfaces

●

Up to 20 ASI interfaces ports (10 ASI ports per ASI I/O card)

◦

SPTS and MPTS supported

◦

User-configurable as input or output on a per-port basis

◦

Each ASI port supports up to 213 Mbps data rate

◦

Supporting ASI input bandwidth limiting

◦

Connector type: BNC

●

Interface for external GPS receiver on ASI SFN I/O card (8 ASI ports per ASI SFN I/O card)

◦

1 PPS and 10 MHz inputs

◦

SPTS and MPTS supported

◦

User-configurable as input or output on a per-port basis

◦

Each output port can be configured in normal or in SFN mode

◦

Error resilience on GPS receiver signal loss

◦

Each ASI port supports up to 213 Mbps data rate

◦

Supporting ASI input bandwidth limiting

◦

Connector type: BNC

● Up to 8 GbE ports (4 ports per GbE I/O card)

◦

SPTS and MPTS supported

◦

Unicast and multicast support

◦

Protocols supported: 802.3, Ethernet, VLAN, RTP, UDP, IP, ARP, ICMP, IGMPv2 / v3

◦

Port configurations: 2+2 backup or 2 inputs + 2 outputs

◦

Quality of Service: Diffserv/TOS 802.1p

◦

Connector type: SFP interfaces

◦

FEC according to Pro-MPEG COP3 release 2 (COP3R2)/SMPTE 2022

◦

Low latency dejitter option

◦

Connector type: SFP interfaces

● Up to 8 ATSC 8-VSB RF input ports

◦

4 and 8 RF input version card available

◦

Each RF input is enabled via software licensing

◦

ATSC A/74 tested

◦

Supports reception of MPTS and SPTS

●

Up to 12 DVB-S and DVB-S2 RF input ports

◦

2 and 4 RF satellite input versions available

◦

Each RF input is enabled via software licensing

◦

Supports reception of single and multi-stream signals

● Up to 12 Common Interface slots for CAMs

◦

2 and 4 CI slot versions available

◦

Supports all major Conditional Access Modules (CAMs)

© 2008-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 14

Data Sheet

◦

Supports descrambling of programs from any input

Re-multiplexing

● PID filtering / remapping on each input

●

PID tracking

● Auxiliary PID synchronization with video

●

Remultiplexing of services and components

● Content routing from any input to any output port

Monitoring

● Error monitoring on each input

●

Input and output bit rate measurements

● Graphical bit rate viewer showing transrater group bit rates

Advanced Video Processing

● Transrating of single SD and HD programs (recompression to lower bit rates)

◦

VBR to VBR

◦

VBR to CBR (clamped VBR)

◦

CBR to CBR

● Open loop statistical remultiplexing of SD and HD programs

◦

Group statistical multiplexing of programs and transrating to lower bit rate if required

◦

Support of user-defined program prioritization

●

Digital Program Insertion in both SD and HD domains

◦

Ad insertion based on SCTE 35 and SCTE 30 standards

◦

Program substitution based on SCTE 35 triggers or manual interaction

◦ eTV (enhanced TV) support

●

DVB Simulcrypt and/or BISS-1 (de)scrambling of SD and HD programs

● Advanced processing features enabled through software licenses on a per-program basis

●

SCTE-21 to SCTE-20 closed captioning conversion

Transcoding

●

Up to 16 SD or 4 HD channels in 1RU

● Up to 32 stereo pairs transcoding of Dolby Digital (AC-3) or MPEG-1 Layer II to HE-AAC

●

Support of audio and metadata pass-through

● Closed caption handling

● Integrated PIP support

● Transcoding features enabled through software licenses on a per-program basis

Digital Overlays

●

Static and animated logo insertion with logo resolution up to 320 x 180

●

Up to 4 MPEG-2 SD or HD programs in 1RU

● Text crawl messages

© 2008-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 14

Data Sheet

Extended PSI-SI Capabilities

● Dynamic PSI/SI regeneration

●

PSI/SI playout carousel

● Import of PSI/SI tables according to DVB Simulcrypt

●

PSI descriptor editing capabilities

● Built-in PSI/SI viewer

●

Pass-through and regeneration of PSIP tables

Redundancy

●

1:1 Redundant configuration supported

● 1:1 GbE port backup supported

●

ASI, GbE port, and GbE port pair mirroring

● Input service and transport stream redundancy

System

● 5 Gbps internal processing throughput with 4 Gbps of I/O capability

●

User hot-swappable power supplies and fans

● Redundant load-sharing power supplies, supports both AC and DC power supplies

●

Configuration settings stored on Compact Flash card (transferable to cold standby unit)

Management

●

SNMP traps

● ROSA management

●

Easy control using web browser

● Ethernet interface for communication with management system and web browser

●

IPsec

● General-purpose Inputs

© 2008-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 14

Product Specifications

Table 1.

Product Specifications

Specification

ASI Interface Card

Number of ports per card

Connector

Impedance

Interface type

Packet format

Bit rate

Syntax

ASI SFN Interface Card

Number of ASI ports per card

ASI port connector

ASI port impedance

ASI port interface type

ASI port packet format

ASI port bit rate

ASI port syntax

GPS interfaces

GPS interface connector

GPS interface impedance

10 MHz reference input frequency

10 MHz reference input level

10 MHz reference input coupling

10 MHz reference input clock edge

1 PPS reference input frequency

1 PPS reference input range

1 PPS reference input sensitivity

1 PPS reference input power

1 PPS reference input coupling

1 PPS reference input trigger

1 PPS reference input trigger level

GPS reference input failure resilience time

Value

10 ports, each port configurable as input or output

BNC-type

75 ohms

Asynchronous Serial Interface (ASI) (according to EN 50083-9)

Auto detection: 188 / 204 byte packets

0.1

– 213 Mbps

SPTS or MPTS (according to ISO/IEC 13818)

8 ports, each port configurable as input or output

BNC-type

75 ohms

Asynchronous Serial Interface (ASI) (according to EN 50083-9)

Auto detection: 188 / 204 byte packets

0.1

– 213 Mbps

SPTS or MPTS (according to ISO/IEC 13818)

1 PPS and 10 MHz reference inputs

BNC-type

50 ohms or > 1 kilohm (selectable via GUI)

10 MHz

200 mVpp

– 3 Vpp

AC

Rising or falling edge (selectable via GUI)

1 PPS, phase locked to the 10 MHz reference input

0 V min., 5 V max.

200 mVpp min.

150 mWRMS into 50E max.

DC

Rising or falling edge (selectable via GUI)

Automatic or manual (selectable via GUI)

Typical 30s. minimum (see Note 1)

Digital Transport Formatter (ASI Interface Card Mode)

Number of ASI input ports per card

Number of ASI output ports per card

Scrambling Activation

7 ASI ports

3 ASI ports (ports are identical)

Per combined incoming transport stream

BISS Mode 1 Conditional Access

Data Sheet

© 2008-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 14

Data Sheet

Specification

GbE Interface Card

Number of ports per card

Connector type

Interface type

Protocols

Maximum throughput

Syntax

Forward Error Correction

IP Statmux (GbE Card Mode)

Statistical Multiplexing control of D9036

Value

Statistical Multiplexing control of:



Mix of D9032, D9050



Mix of D9032, D9050, D9034, D9054

Co-Processing Card

Video formats

Audio formats

Transrating (MPEG 2)

DVB Simulcrypt Scrambling

Maximum throughput

Transcoder Card

Video input coding format

Video output coding format

Video resolutions

Up to 24 encoders in a maximum of 4 pools.

Encoders can be any mix of SD and HD, MPEG-2 and H.264.

Up to 60 MPEG-2 encoders in up to 20 statmux pools

MP@ML (SD) en MP@HL (HD)

MPEG-1 Layer II and Dolby AC-3

Up to 420 PAL/350 NTSC SD Streams or 85 HD Streams per card

Up to 500 streams per card

2 Gbps

Video modes

Video transcoding

Audio input coding format

Audio output coding format

Audio transcoding

PIP encoding format

PIP picture size

Chassis Compact Flash size

8-VSB Input Card

Number of ports per card

Connector

Impedance

Interface type

Frequency range

Channel range

Input level range

Syntax

Satellite Input and CI decryption Card

4 GbE ports, 2+2 (for redundancy)

Optical/electrical Small Form Factor Pluggable (SFP) (see Note 2)

Gigabit Ethernet (GbE) according to IEEE 802.3ab (Electrical) or IEEE

802.3z (Optical)

Support for IEEE 802.Q VLAN tagging

MPEG over IP/UDP and IP/UDP/RTP

2 Gbps input and 2 Gbps output per card

SPTS or MPTS (according to ISO/IEC 13818)

Pro-MPEG COP3R2/SMPTE-2022

MPEG-2 MP@ML (SD) and MPEG-2 MP@HL (HD)

H.264 MP@L3, H.264 HP@L3 and H.264 HP@L4

SD: 525i/29.97 and 625i/50

HD: 720p/59.94, 1080i/29.97, 720p/50 and 1080i/25

CBR and VBR

Up to 16 SD streams per card or up to 4 HD streams per card

MPEG-1 Layer II and AC-3

Pass-through: MPEG-1 Layer II, AC-3 and others

Transcoding: HE-AAC

Up to 32 stereo pairs per card

H.264 main profile

96 x 96 or 128 x 96 or 176 x 144 or 192 x 192

16 GB required

4 or 8 ports, each port independently configurable

F-type, female

75 ohms

ATSC 8-VSB according to ATSC A/53 - Part 2 (A/74 tested)

50

– 860 MHz

2

– 69

-80

– -20 dBm (Note 3)

SPTS or MPTS (according to ISO/IEC 13818)

© 2008-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 14

Data Sheet

Specification

Number of RF ports per card

Value

2 or 4 ports, each port independently configurable

Input return loss

Connector

Interface type

Frequency range

Input level range

Constellation

Symbol Rate

FEC code rate

FEC Frame

Roll Off factor

Modulation Mode

Transport stream mode

Number of Common Interface slots per card

Interface type

Conditional Access

Scrambling Algorithm

> 10dB

Ftype, female (75 Ω)

DVB-S (according to ETSI EN 300 421)

DVB-S2 (according to ETSI EN 302 307)

950 to 2150 MHz

-65 to -25 dBm

QPSK, 8PSK, 16APSK

1 to 45 MSym/s

DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 7/8

DVB-S2 QPSK: 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10

DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10

DVB-S2 16APSK: 2/3, 3/4, 4/5, 5/6, 8/9, 9/10

Normal and Short

0.20, 0.25 and 0.35

CCM and VCM

Single and Multi-stream

2 or 4 independent PCMCIA slots

DVB-CI (according to EN 50221)

Level and mode of scrambling

Number of CA system connectors

Connector type

Interface Type

Simulcrypt

Digital Overlays

Video input coding format

Video output coding format

Video resolutions

End-to-end delay

Logo format

Number of logos per program

Maximum logo resolution

Total supported screen logo size

Transport Stream Processing

DVB Common Scrambling Algorithm

BISS Mode 1

Service/Program level scrambling support, Component level scrambling support

Both MPTS and SPTS scrambling supported

1

RJ-45

Ethernet 10/100/1000 BASE-T

Simulcrypt version 3

MPEG-2 MP@ML (SD) and MPEG-2 MP@HL (HD)

MPEG-2 MP@ML (SD) and MPEG-2 MP@HL (HD)

SD: 720 x 576i, 704 × 576p, 720 x 480i, 720 × 486, 704 x 480p

HD: 1280x720p

Frame Rates: 24, 29.97, 30, 59.94, 60,

1.4 s

PNG or TGA

Up to 4

320 x 180 pixels

Up to 25% vertically and horizontally of screen size

PID filtering / remapping capability

Built-in PSI Viewer

Dynamic PSI regeneration with advanced descriptor handling support

Detailed bit rate measurement of incoming services

Error monitoring

Management and Monitoring

Number of ports on chassis 2

© 2008-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 10 of 14

Data Sheet

Specification

Connector type

Interface type

Protocols

User interface

General Purpose Inputs

Environmental Specifications

Operating temperature

Storage temperature

Humidity

Altitude

Power Requirements

Power consumption (fully loaded)

Input voltage

AC input voltage

Nominal

Normal service voltage range

Frequency

DC input voltage

Nominal

Normal service voltage range

Chassis Mechanical Specifications

Height

Width

Depth

Weight (fully loaded)

Cooling

Notes:

Value

RJ-45

10/100 & 10/100/1000 BASE-T

HTTP, SNMP, IIOP

Embedded HTML user interface

4 (spring clamp terminal block connector)

0°C

– +50°C / +32°F – +122°F

-40°C

– +70°C / -40°F – +158°F

5%

– 95% (non condensing)

-200

– 10000 feet (-61 – 3048 m)

< 225 W (see Note 1)

100

– 240 VAC

90

– 254 VAC

47

– 63 Hz

-48 VDC

-38

– -58 VDC

1RU 1.74 in. / 44 mm

19 in. / 483 mm

22.13 in. / 562 mm

23.2 lbs / 10.5 kg

Front to back, forced air; units are stackable

1. GPS Input reference loss resilience feature available on hardware version 2 only.

2. SFP Module not included.

3. Input level range for channel 2: -20 to -79 dBm at ambient temperature.

Figure 2. Cisco DCM Series D9901 MPEG Processor Rear Panel with 2 AC power supplies, 1 ASI card, and

1 GbE card

1

6

2

7

3

8

4

9

5

10

1 2

3

4

© 2008-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 11 of 14

Data Sheet

Table 2.

Ordering Information Cisco DCM Series D9901 Components

Description

Chassis

D9901 DCM MKI Chassis, 1RU, No PSU, Main

Hardware Modules (Boards delivered as separate kits)

Software

Software license CD-

ROM (Add licenses in Cisco’s Dynamic Configuration Tool)

Part Number

DCM-MK1-1RU

DCM ASI I/O board

DCM ASI SFN I/O board

DCM GbE I/O board

DCM Co-Processor board

DCM FEC board

DCM Transcoder board

DCM MPEG-2 Digital Overlay board

DCM 8-VSB input card with 4 RF inputs

DCM 8-VSB input card with 8 RF inputs

DCM DRD Satellite Reception and Decryption board with 2 RF and 2 CI inputs

DCM-ASI-MK1

DCM-ASI-SFN-MK1

DCM-GBE-MK1

DCM-COP-MK1

DCM-FEC-MK1

DCM-TC-MK1

DCM-OVERLAY-MK1

DCM-8VSB-4RF

DCM-8VSB-8RF

DCM-DRD-2SAT2CI

DCM DRD Satellite Reception and Decryption board with 4 RF and 4 CI inputs

DCM blank plate for I/O slot

DCM-DRD-4SAT4CI

DCM-BLANK-IO

DCM blank plate for power supply DCM-BLANK-PSU

DCM 16G Compact Flash upgrade kit (select version in Cisco’s Dynamic Configuration Tool) MEM-DCM-CF16

Power Supplies

AC power supply (AC power cord needs to be ordered separately)

DC power supply

AC Power Cords

Argentina

Australia

China

Europe

PWR-350-AC-1RU

PWR-350-DC-1RU

CAB-PWR-DMN-ARG

CAB-PWR-DMN-AUS

CAB-PWR-DMN-CHN

CAB-PWR-DMN-EU

Italy

Japan

UK

US

CAB-PWR-DMN-IT

CAB-PWR-DMN-JPN

CAB-PWR-DMN-UK

CAB-PWR-DMN-US

DCM-LIC-UPGR

© 2008-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 12 of 14

Data Sheet

Table 3.

Ordering Information SFP Plug-ins (see Note)

Description

SFP Plug-ins

– WDM types

GbE SFP module 850 nm (LC, up to 500 m)

GbE SFP module 1310 nm (LC, up to 5 km)

GbE SFP module 1310 nm (LC, up to 40 km)

SFP Plug-ins

– CWDM types

GbE SFP module 1470 nm (LC, up to 40 km)

GbE SFP module 1490 nm (LC, up to 40 km)

GbE SFP module 1510 nm (LC, up to 40 km)

GbE SFP module 1530 nm (LC, up to 40 km)

GbE SFP module 1550 nm (LC, up to 40 km)

GbE SFP module 1570 nm (LC, up to 40 km)

GbE SFP module 1590 nm (LC, up to 40 km)

GbE SFP module 1610 nm (LC, up to 40 km)

GbE SFP module 1470 nm (LC, up to 70 km)

GbE SFP module 1490 nm (LC, up to 70 km)

GbE SFP module 1510 nm (LC, up to 70 km)

GbE SFP module 1530 nm (LC, up to 70 km)

GbE SFP module 1550 nm (LC, up to 70 km)

GbE SFP module 1570 nm (LC, up to 70 km)

GbE SFP module 1590 nm (LC, up to 70 km)

GbE SFP module 1610 nm (LC, up to 70 km)

SFP Plug-ins

– 1000 BT copper

GbE SFP module 1000 BT copper

Part Number

SFP-WDM-850-0500

SFP-WDM-1310-5

SFP-WDM-1310-40

SFP-CWDM-1470-40

SFP-CWDM-1490-40

SFP-CWDM-1510-40

SFP-CWDM-1530-40

SFP-CWDM-1550-40

SFP-CWDM-1570-40

SFP-CWDM-1590-40

SFP-CWDM-1610-40

SFP-CWDM-1470-70

SFP-CWDM-1490-70

SFP-CWDM-1510-70

SFP-CWDM-1530-70

SFP-CWDM-1550-70

SFP-CWDM-1570-70

SFP-CWDM-1590-70

SFP-CWDM-1610-70

SFP-CU-RJ45

Note: All Class 1 SFP plug-ins are according to IEC 60825-1 (1997) Amendment 2 (2001).

© 2008-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 13 of 14

Data Sheet

Service and Support

Using the Cisco Lifecycle Services approach, Cisco and its partners provide a broad portfolio of end-to-end services and support that can help increase your network's business value and return on investment. This approach defines the minimum set of activities needed by technology and by network complexity to help you successfully deploy and operate Cisco technologies and optimize their performance throughout the lifecycle of your network.

For More Information

To learn more about this product, contact your local account representative.

To subscribe to receive end-of-life/end-of-sale information, go to http://www.cisco.com/cisco/support/notifications.html

.

Manage your network with ROSA service and element management. Get faster mean-time-torepair, increased uptime, and management that evolves as you provision your networks.

US toll-free 1-800-722-2009. EMEA +32 56 445 445. www.cisco.com/go/rosa .

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks .

Third party trademarks mentioned are the property of their respective owners.

The use of the word partner does not imply a partnership relationship between Cisco and any other company.

(1009R)

Specifications and product availability are subject to change without notice.



2008-2011 Cisco and/or its affiliates. All rights reserved.

800722-2009 or 678 277-1120 www.cisco.com

Part Number 7015552 Rev J

August 2011

© 2008-2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 14 of 14