advertisement
8x8, 16x16 HD-SDI and 16x16 SDI Matrix Switchers
Features
Inputs on all models meet SMPTE 259M compliance. The HD-SDI models also meet
SMPTE 292M standards.
The MatrixPRO Digital Series offers three models of serial digital matrix switchers for routing of SDI and HDSDI video signals: 8X8, 16X16 HD-SDI and 16X16 SDI. The
HD-SDI models allow users to route either HD-SDI or SDI signals. The SDI unit will only pass SDI signals. Each input and output is individually isolated. These inputs
Outputs on all models meet SMPTE 259M compliance. The HD-SDI models also meets
SMPTE 292M and the SDI models also meets
SMPTE 344 compliance.
can be switched to any one or all outputs with no crosstalk or signal noise between channels. All models are SMPTE 259M compliant for inputs. The HD-SDI models are also SMPTE 292 M compliant for input sources.
Three switching modes: Front Panel, External remote (OPTIONAL) or via MP software GUI program.
IP (Ethernet) control standard
Front panel lock out
I/O grouping allows specific outputs to be grouped together.
Vertical interval switching
Large LCD display allows for easy navigation of menus and provides visual verification of information.
Fully field programmable to support upgrades.
Backed by a three-year warranty.
Units are rack-mountable and each unit includes RS-232/485 capability. All units come standard with an easy to operate front panel interface for simple input and output selection. All units can be connected to an optional Remote Control interface for input and output selection. An Ethernet port for IP control is featured on all units.
The MatrixPRO Digital Series features the MatrixPRO grouping matrix that allows the router to be divided into smaller sub switchers, making installation and control easier. I/O grouping allows specific outputs to be grouped together, such as those for all HD-SDI formats. All models feature Vertical Interval Switching for all input channels.
The MatrixPRO routers are designed to work effortlessly with our other Barco Video
Processing products like the Encore as well as stand-alone for custom applications.
Folsom
MatrixPRO Digital Series Specifications
VIDEO ROUTING
Input
Output
Signal Speed
Return Loss
Maximum Cable Length
MatrixPRO-SDI
SMPTE 259M compliant
SMPTE 259M and 344M compliant
143,177,270,360 Mbps
Matrix-PRO HD-SDI
SMPTE 259M and 292M compliant
SMPTE 259M and 292M compliant
143,177,270,360,1483.5,1485Mbps
-15dB @ 270 Mbps
350m at 270Mbps with Belden 1694A cable
-15dB @ 270Mbps and –15dB @ 1.485Gbps
100m @ 1.485Gbps, 350m at 270Mbps with Belden 1694A cable
VIDEO INPUT
Number/signal type
Connectors
Impedance
VIDEO OUTPUT
Number/signal type
Connectors
Amplitude
Impedance
Output Jitter
Switching type
ENCLOSURE
Dimension
Weight
Shipping Weight from Factory
Rack mount
Type
GENERAL
Environment Temperature
Environmental Humidity
Power Type
Power Connector
Power Dissipation
Agency
8 or 16 Unbalanced serial data
8 or 16 BNC female
75 ohms
8 or 16 Unbalanced serial data
8 or 16 BNC female
800mV +\- 10%
75 ohms
0.2 U.I (MAX)
Vertical Interval Switching (Input Channel 1 is Reference)
3.5”H X 17.0” W x 15”D (2U high, full rack width)
8.89 cm H x 43.2 cm W x 38.1 cm D
17 lbs (7.6 kg)
22 lbs (10kg) included
Metal
0-40 degrees C
0-95%, non-condensing
100-240 VAC, 47-63 Hz, auto-configuring
IEC connector with integrated fuse and switch
32 watts
FCC:Part 15, Subpart B – Class A, EN55022:1998 Class A and EN550024:1998
CE: safety EN 60950:1992
CONTROL / REMOTE
Serial control port
Baud rate and Protocol
Ethernet
Ethernet protocol
RS-232/ RS-485, 25-pin female D connector
57600, 8-bit,1 stop bit, no parity selectable
1 RJ-45 female connector, running 10/100 Base-T, half/full duplex with autodetect
ARP, ICMP (ping), TCP/IP, Telnet, HTTP
31-0401000-00 Sept.05
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project