4K/UHD Dual-Distance 6x6 HDMI to

HDBaseT Matrix Switcher with PoE

AT-UHD-PRO3-66M

User Manual

Please check http://www.atlona.

com/product/AT-UHD-PRO3-66M for the most recent firmware

update or manual.

atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Table of Contents

1. Introduction

2. Package Contents

Features

4. Before You Start

5. Panel Descriptions

• Front Panel

• Back Panel

6. Rack Mounting

7. Category Cable

8. Captive Screw Audio

9. Connection Diagram

10. Button Set Up

................................................................................. 3

................................................................................. 3

................................................................................. 3

................................................................................. 4

................................................................................. 5

................................................................................. 5

................................................................................. 6

................................................................................. 7

................................................................................. 8

................................................................................. 9-12

WebGUI

12.

13. IR Remote Control

14. Captive Screw

15. Specifications

................................................................................. 23

................................................................................. 24

................................................................................. 25

16. Safety Information

17.

................................................................................. 26

27-28

18. Atlona Product Registration ................................................................................. 28 atlona.com

2

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Introduction

The 4K/UHD Dual-Distance 6x6 HDMI to HDBaseT Matrix Switcher with PoE is a multi zone switcher with long distance and extended distance ports, multiple control options, supports HDCP 2.2, and multi-channel audio up to Dolby Atmos.

Package Contents

• 1 x AT-UHD-PRO3-66M

• 10 x 4 pin captive screw female connector

(3 x IR IN, 3 x IR OUT, 4 x Audio OUT)

• 1 x 5 pin captive screw female connector - IR

(2 pin)

, RS-232

(3 pin)

• 1 x IEC C13 power cable

• 1 x IR Remote control

• 1 x Pair of rack mount ears

• 1 x User Manual

Features

• Dual-distance HDBaseT ports for up to 100 meters

(328 feet)

• Two HDMI outputs which can be set to mirror or matrix mode

• PoE

(Power over Ethernet)

to power up to six compatible PoE EX series receivers

e.g. AT-UHD-EX-100CE-RX or

AT-UHD-EX-70C-RX

• EDID learning for up to 8 video display EDIDs

• Built in internal EDID mode provides 14 unique EDIDs to ensure compatibility

• Multiple control options such as RS-232, IR, TCP/IP, WebGUI, and front panel

• 2Ch audio de-embedding through captive screw ports

• Independent zone volume control, mute, and 5 band EQ for captive screw audio outputs

• HDCP 2.2 compliant

• Multi-channel audio pass through up to Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio,

and Dolby Atmos

• Supports digital audio up to 24-bit, 192 kHz

• Internal international power supply

Before You Start

• Make sure when connecting a category cable a 568B termination method is used. See page 6 for

mores details.

• Use a component surge suppressor with line conditioning for best results.

Note: Atlona’s warranty does not cover damage due to electrical disturbances. A component surge

suppressor with line conditioning is highly suggested, especially in areas with electrical

storms.

atlona.com

3

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Panel Description

Front Panel

4 5 c d

POWER ENTER

FNC CANCEL

1 2

5 6

EDID INFO

7

3 4

8

6

AT-UHD-PRO3-66M

1 2 3 4 5 6 1ED

1

2ED

2

3

3

4 a b

5 6 7 8

1. IR Receiver Window - Receives the signal from the included IR Hand Held Remote Control or 3rd

HDMI IN

ZONE OUT

2 3 4 5 7 1 2 3 4 5 7 1 2 3 4

L R L R L R L R RS-232 IR IN

2. Function

S

(FNC)

IR IN

S

Button - Select for command options.

IR OUT AUDIO OUT

(blue backlight when selected)

LAN FW MAIN

S

a. EDID: Save/Load EDIDs to individual inputs

FUSE: T 4A / 250V PWR: 100-240VAC 50/60Hz

INFO: Displays the firmware, IP, and MAC address

1: Save a single input to all the outputs with this function

2: View additional matrix and output RS-232 baud information

3. Cancel Button - Within the function menu use this button to go back one screen or to return to

the home screen

4. Power Button - Cycles the power between On

(blue backlight)

or Standby

(red backlight)

mode

5. Enter Button - Use to view current status for inputs and outputs or to confirm a command

6. Number buttons - Use these buttons to select input and output paths or use with the function

button to change matrix settings atlona.com

4

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Back Panel

AT-UHD-PRO3-66M

1

2

POWER ENTER

FNC CANCEL

3

1

5

EDID INFO

2

6

3

7

4

4

8

1ED 2ED 3 1 2 3 4 5 6 4 5 6 7 8

HDMI IN ZONE OUT

1 2 3 4 5 7 1 2 3 4 5 7

L

1

R L

2

R L

3

R L

4

R

S S S

IR IN

S S S S S S

IR OUT

S S S

AUDIO OUT LAN FW

RS-232 IR IN

RX TX

MAIN

S

FUSE: T 4A / 250V PWR: 100-240VAC 50/60Hz

5 6

7 8 9

10

11

1. HDMI Input - Connect HDMI sources to these ports

e.g. DVD players, Blu-ray players, computers, game consoles, etc

2. Extended distance HDBaseT ports - Connect to extended distance EX receivers for pass through

of PoE, control, and A/V signals.

e.g. AT-UHD-EX-100CE-RX

3. Long distance HDBaseT ports - Connect to long distance EX receivers for pass through

of PoE, control, and A/V signals.

e.g. AT-UHD-EX-70C-RX

4. HDMI outputs - Mirror to provide a local output for HD audio routing to an AVR, or matrix the

ports to provide a local video output for in room displays or an HDBaseT extender set

e.g. AT-UHD-EX-100CE-KIT

5. IR IN - Use with a 3rd party IR control box to extend IR control commands to video displays over

category cable

6. IR OUT - Connect IR emitter here for controlling sources

7. Audio out - Captive screw analog breakouts for use with a sound system or multi-channel

zone amplifier

- Audio outputs follow the corresponding HDBaseT outputs e.g. Audio out 1 follows HDBaseT 1

8. LAN port - Connect to a network for TCP/IP, WebGUI and firmware updates

9. FW port - USB not enabled at this time for future functionality

10. Main control - Connect IR or RS-232 control system to the matrix

11. Internal power supply - Connect included IEC C13 power cable from here to a power outlet.

Rack Mounting

To rack mount the UHD-PRO3-66M unit: use the rack mount ears, the 6 screws from the sides of the UHD-

PRO3-66M, and 4 rack screws.

POWER ENTER

FNC CANCEL

1 2

5 6

EDID INFO

3

7

4

8

POWER ENTER

FNC CANCEL

1 2 3 4

5 6

EDID INFO

7 8

To affix the rack mount ears, remove the three screws on each side of the UHD-PRO3-66M and affix the rack ears to the UHD-

PRO3-66M (as shown in the picture to the left).

Place the UHD-PRO3-66M in the rack, lining the holes in the rack ears with the holes in the rack.

Once placed, use the rack screws to keep the unit in place. (as shown in the picture to the left).

Note: Increase the air flow as needed

to maintain the recommended

temperature inside the rack.

Note: Do not exceed maximum weight

loads for the rack. Install heavier

equipment in the lower part of

the rack for stability.

atlona.com

5

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Category Cable

For the category cables used in the installation of these products, please be sure to use a 568B termination as pictured below:

1. White - Orange

2. Orange

3. White - Green

4. Blue

5. White - Blue

6. Green

7. White - Brown

8. Brown

Use the table below to verify the best category cable for the installation.

Wiring

Solid

Performance Rating

Shielding

Shielded (STP/FTP)

Stranded - Patch cable

(Not recommended)

Unshielded (UTP)

Unshielded (UTP)

Shielded (STP/FTP)

Termination

Type of LAN cable

CAT5e/6

***

**

*

*

CAT6a/7

****

N/A

N/A

N/A

Please use EIA/TIA-568-B termination

Important! 4K

(UHD)

signals are sensitive to cable quality and installation technique. It is recommended to use CAT6a/7 solid core cables for best results.

Note: For cable distances see the specifications on page 25

Connector

Connector type and size is very important to ensure extenders work correctly. Please use the matching cable type with the correct RJ45 connector.

CAT5e cables should use only CAT5e RJ45 connectors

CAT6 cables should use only CAT6 connectors

CAT6a cables should use only CAT6a connectors

CAT7 cables should use only CAT7 connectors

Using the wrong size connectors may result in interference causing loss of signal.

Important! “EZ RJ45 connectors” are not recommended with HDBaseT extenders. Doing so may result in interference

with audio and video transmission.

atlona.com

6

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Analog Audio

A captive screw analog audio connector is provided to ensure a more reliable and secure connection. The captive screw connector supports unbalanced audio output.

Audio is broken out from the selected HDMI input. If HDMI source 3 (e.g. set top box) is selected then both the corresponding HDBaseT port and analog audio port will output the set top box audio. Audio must be 2Ch PCM or the analog audio port will pass no audio.

Note: Analog audio ports will mirror the corresponding HDBaseT output port

e.g. Analog output 2 will mirror HDBaseT output 2

Unbalanced audio connections use two wires for connection with consumer audio components.

Tip (+)

RCA

Sleeve (

Ground)

Note: Pin outs may vary, please refer to the audio device’s manual to ensure a correct connection.

Important! When terminating cables, please ensure exposed adjacent wires do not touch. This may result in a short that can damage connected devices.

Audio outputs follow the corresponding HDBaseT outputs

e.g. Analog output 3 will have the same audio as HDBaseT output 3

UNBALANCED

+

L / R

+

+ +

For an easier and time saving solution for analog audio, the optional Atlona Captive Screw Ready 2

Channel Unbalanced Audio Cable

(AT-LC-CS-2CH-2M)

features pre-stripped wires at one end and RCA connectors at the other end. Purchase these at http://www.atlona.com

To connect these, use the red wire in the right positive port, the white wire in the left positive port, and the black can be placed in either ground port.

atlona.com

7

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Connection Diagram

Blu-ray player

Set top box

Game Console

Media Player Game Console

Game Console

Game Console

AT-UHD-PRO3-66M

1 2 3 4 5

1 2 3 4 5 7

S S S

IR IN

S S S

HDMI IN

1 2 3 4 5 7

S S S

IR OUT

S S S

6

ZIGBEE 12V DC FACTORY

RESTORE

ID

SERIAL 1

IR OUT

SERIAL 2

Control System

HDMI COMPONENT

VIDEO OUT

WIFI 1 DIGITAL

COAX OUT

AUDIO OUT

R

AUDIO IN eSATA

ETHERNET

1 2 3 4

RELAYS

WIFI 2

CONTACTS

1

GAIN

2

1

SPEAKER

+

-

2

3

GAIN

4 5

GAIN

6 7

GAIN

8 9

GAIN

10 11

GAIN

12

3

SPEAKER

+

-

4 5

SPEAKER

+

-

6 7

SPEAKER

+

-

8 9

SPEAKER

+

-

10

SPEAKER

+

11

-

12

POWER

Multi-channel Zone Amplifier

FNC

ENTER

CANCEL

POWER

1

AT-UHD-EX-100CE-RX

2 3

ETHERNET

4

AT-UHD-EX-100CE-RX

5

RXTX

6

P S

7

S

8

RS-232 HDMI OUT IR IN IR OUT HDBaseT IN

EDID INFO

1ED 2ED 3 4

L

1

R L

2

R

AUDIO OUT

L

3

R L

4

R

LAN

ZONE OUT

FW

RS-232 IR IN

RX TX

MAIN

S

5 6

FUSE: T 4A / 250V

7 8

PWR: 100-240VAC 50/60Hz

AT-UHD-EX-70C-RX

POWER

FW LINK

P S S RX TX

RS-232 IR OUT HDBaseT IN HDMI OUT IR IN

AT-UHD-EX-70C-RX

AVR

Router

Video

HDBaseT

Audio

Control

Blu-ray player

Set top box

AT-UHD-PRO3-66M

1 2 3 4 5

1 2 3 4 5 7

S S S

IR IN

S S S

HDMI IN

1 2 3 4 5 7

S S S

IR OUT

S S S

6

ZIGBEE 12V DC FACTORY

RESTORE

ID

SERIAL 1

IR OUT

SERIAL 2

Control System

HDMI COMPONENT

VIDEO OUT

WIFI 1 DIGITAL

COAX OUT

AUDIO OUT

R

AUDIO IN eSATA

ETHERNET

1 2 3 4

RELAYS

WIFI 2

CONTACTS

POWER ENTER

FNC CANCEL

5

1

EDID

POWER

6

2

AT-UHD-EX-100CE-RX

FW

7

RXTX

RS-232

P S

8

S

IR IN IR OUT HDBaseT IN

LINK

HDMI OUT

INFO

1ED 2ED 3 4

L

1

R L

2

R L

3

R L

4

R

AUDIO OUT LAN FW

ZONE OUT

RS-232 IR IN

RX TX

MAIN

S

5 6

FUSE: T 4A / 250V

7 8

PWR: 100-240VAC 50/60Hz

AT-UHD-EX-70C-RX

POWER

AT-UHD-EX-70C-RX

RX TX P S S

FW LINK

RS-232 IR IN IR OUT HDBaseT IN HDMI OUT

Router

Note: These products are meant for indoor use only. Do not install or connect the products to any outdoor components.

atlona.com

8

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Matrix Front Panel Functions

The AT-UHD-PRO3-66M’s front panel has 3 functions: I/O control, EDID, and matrix settings. The following sections go over step by step setup & control.

I/O Control

To route an input to an output

I.E. Input 1 to output 2

input selection home screen

AT-UHD-PRO3-66M

Select Input Number

---> through

--->

Select input

Enter to confirm

---> --->

Select output

Press enter to confirm

--->

output selection

through

---> --->

Feedback =”Input # routed to

Output #”

To route one input to all outputs

I.E. Input 1 to output 1 through 8

home screen

AT-UHD-PRO3-66M

Select Input Number

---> --->

Select Function

--->

--->

input selection

through

--->

Feedback = ”Input # saved to

all outputs”

--->

Select Input to route to all Outputs atlona.com

9

Toll free: 1-877-536-3976

Local: 1-408-962-0515

EDID Set Up

When the matrix is completely connected and turned on it will load the default EDID, which is the highest common native resolution of the connected devices.

(i.e. In the diagram below the default would be 1080p with 2ch audio. Multi-channel audio and 3D are not enabled on default mode, unless all devices

support these features.)

4K/UHD-Dolby TrueHD

Input 1

4K/UHD-2ch

Output 1

Blu-ray player

1 2 3

M B

POWER ENTER DEFAULT

4

ALL

5

MEMORY

6

AT-PRO3HD66M

FCN CANCEL EDID IR INFO

1080p-2ch

Output 2

AT-PRO3HD66M

FW RS-232

1080p-2ch

Input 2

MATRIX IN MATRIX OUT

IR IN IR IN IR IN

4K/UHD - Dolby TrueHD

IR IN

MAIN

IR OUT

CAT5e/6/7

IR OUT

CAT5e/6/7

IR OUT

CAT5e/6/7

IR OUT

CAT5e/6/7

IR OUT

CAT5e/6/7

IR OUT

CAT5e/6/7

BACKUP

COAX OUT COAX OUT COAX OUT COAX OUT

4K/UHD

Set top box

LAN

1 2 3

HDMI IN

4 5 6

ZONE 1 ZONE 2 ZONE 3 ZONE 4

AVR

HDMI OUT

ZONE 5

HDMI OUT

ZONE 6

DC 24V

On default, all devices in the diagram will work at 1080p. If a device is not syncing or a different resolution is required, internal EDID or EDID copy and load should resolve these issues. The UHD-

PRO3 can copy and store up to 8 EDIDs to memory.

Step 1: copy an EDID

Before an EDID can be loaded to an input, it must first be copied to the matrix’s memory. Each display’s EDID can be saved individually to one of the matrix’s eight preset EDID memories.

home screen

AT-UHD-PRO3-66M

Select Input Number

--->

--->

Select Function

---> --->

1 Copy Output EDID

2 Choose Input EDID

--->

output selection

Copy output EDID

Enter to confirm

---> through

---> --->

Feedback=

”Output EDID # to

Memory [Failed/Passed]”

Step 2: load a copied EDID to an input

Once EDIDs have been copied to memory they can be loaded to a specific input.

Note: (refer to the diagram above) Using the EDID of output 3 with input 1 will enable 4K/UHD and Dolby TrueHD to pass. With these settings, output 2 will receive no audio or video and output 1 will receive no audio.

home screen

AT-UHD-PRO3-66M

Select Input Number

--->

--->

Input: Mode:

1:Dflt 2:Saved 3:Int

--->

Select input EDID

--->

--->

--->

Select Function

---> --->

1 Copy Output EDID

2 Choose Input EDID

input selection

---> through

--->

Input: Press Enter

Current:Default

memory selection

Select Input EDID

Memory (1-10)

---> through

--->

--->

--->

Load EDID Memory

0? Press Enter

---> --->

Feedback = ”EDID # loaded

to Input #” atlona.com

10

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Step 3: Load an internal EDID to an input

If the first two steps don’t produce the correct resolution or audio configuration, the fourteen internal EDIDs should resolve the issue.

Internal EDID options

EDID 1: 1080P 2CH audio

EDID 2: 1080P HD multi-channel audio 7.1*

EDID 3: 1080P Dolby Digital/DTS 5.1

EDID 4: 1080P 3D 2CH audio

EDID 5: 1080P 3D HD multi-channel audio 7.1*

EDID 6: 1080P 3D Dolby Digital/DTS 5.1

EDID 7: 720P 2CH audio

EDID 8: 720P Dolby Digital/DTS 5.1

EDID 9: 1280x800 RGB 2CH audio

EDID 10: 1366x768 RGB 2CH audio

Front panel display readout

ATL 1080P 2CH

ATL 1080P Multi CH

ATL 1080P DD

ATL 1080P 3D 2CH

ATL 1080P 3D MultiCH

ATL 1080P 3D DD

ATL 720P 2CH

ATL 720P DD

ATL 1280x800 RGB 2CH

ATL 1366x768 RGB 2CH

ATL

EDID 12: 1280x800 DVI**

EDID 13: 3840x2160 2CH audio

EDID 14: 3840x2160 multi-channel audio 7.1*

ATL UHD 2CH

ATL UHD MultiCH

* Recommended EDID for AVR use

** Recommended EDID for DVI projectors use

home screen

AT-UHD-PRO3-66M

Select Input Number

---> --->

Select Function

---> --->

1 Copy Output EDID

2 Choose Input EDID

--->

--->

--->

input selection

--->

Select input EDID

Input: Mode:

1:Dflt 2:Saved 3:Int

--->

--->

--->

Feedback = ”Int EDID # saved

to input #” through

--->

Int EDID + enter

ATL _____ ____

--->

Input: Press Enter

Current:Default

--->

--->

Internal EDID selection

1 - Cycles through

EDIDs in ascending order

2 - Cycles through

EDIDs in descending order

RS-232 and TCP/IP commands:

To access different EDIDs through RS-232 or TCP/IP, the following commands must be used.

Command Feedback Description

EDIDMSetX default EDIDMSetX default Sets the EDID of an input to the default EDID

Ex. EDIDMset2 default - sets input 2 to default

EDIDMSetX saveY EDIDMSetX saveY Sets the EDID of an input to the previously saved EDID memory

Ex. EDIDMset1 save3 - sets input 1 to EDID memory 3

EDIDMSetX intZ EDIDMSetX intZ Sets the EDID of an input to one of the internal EDIDs

Ex. EDIDMset3 int6 - sets input 3 to the internal EDID - 1080p 3D Dolby

Digital 5.1

atlona.com

11

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Matrix Status

When installing or troubleshooting it’s important to verify settings, or be able to come back to a project and see how it was set up. The AT-UHD-PRO3-66M matrix settings are viewable through the front panel display. View current I/O settings, firmware version, IP, MAC Address, and the RS-

232 baud rates of not just the matrix but output zones as well.

View current I/O settings

home screen

AT-UHD-PRO3-66M

Select Input Number

---> --->

O 1 2 3 4 5 6 7 8

I x x x x x x x x

View Firmware/Baud Rate settings

home screen

AT-UHD-PRO3-66M

Select Input Number

---> --->

Select Function

---> --->

AT-UHD-PRO3-66M

FW Ver: 0.X.XX

---> -----

IP Address:

XXX.XXX.XXX.XXX

Press INFO to cycle through the IP Address, IP

Port, and MAC Address

-----

IP Port

23

-----

MAC Address

B8:98:B0:03:0D:4C

--->

-----

TX Baud Rate

115200

Matrix Baud Rate

EX.

115200, 9600, etc

-----

RX 01 Baud Rate

X X X X

Output Baud Rate

--->

Press 2 to cycle through the baud rates of each output.

Factory Reset

Press and hold the and buttons for 5 seconds for the factory reset to occur

Note: The matrix will not display any signs of the reset. Please wait 5 additional seconds and resume normal operation atlona.com

12

Toll free: 1-877-536-3976

Local: 1-408-962-0515

LAN

For convenience, the matrix comes with DHCP default on. This ensures the matrix IP will not override another device.

To find the matrix IP:

home screen

AT-UHD-PRO3-66M

Select Input Number

---> --->

Select Function

--->

--->

AT-UHD-PRO3-66M

FW Ver: 0.3.XX

---> --->

IP Address:

X.X.X.X

IP Address

EX.

192.168.000.200

Browser WebGUI

Atlona has created an easy to use WebGUI for changing settings and controlling the matrix.

To begin, plug a LAN cable into the matrix and your network router, then type the IP address of the matrix into a web browser

(as seen below)

.

Important: If any stability issues are experienced, disable any anti-virus or firewall that may be interfering with network communication to the Matrix. Once set up is done and the matrix GUI is no longer being used, the firewall and anti-virus can be re-enabled.

A login screen will appear

(this is the same log in for admin and general users)

. For the first log in

(and future admin changes)

the username is “root” and password is “Atlona”.

Note: Admin can be changed within the webGUI (see page 16).

atlona.com

13

Toll free: 1-877-536-3976

Local: 1-408-962-0515

The home page will allow the user to see the general system information, download the matrix log, and save/load system settings. The information displayed will help figure out if the matrix is up to date, how long it has been running, and other key information.

The Download Log button is for Atlona Tech Support Team only. Tech Support may request the log be sent to them for more in depth troubleshooting.

Note: To save the log, press the “Download Log” button. The file will automatically save to the

“download” folder.

Save System Settings will backup the current settings of: network, users, I/O labels, and the current

I/O settings of the matrix. If the matrix requires a factory reset, the backed up settings can be loaded onto the matrix.

Note: To save the system settings, press the “Save System settings” button. The file will automatically save to

the download folder. The file can be renamed (using a project name may make the file easier to find

later) but the file extension should not be altered (altering the extension may corrupt or make the file

unusable).

Note: To load the system settings, click the browse button on the WebGUI. Once the search folder displays,

select the file and press the load button. A progress bar will display to make it easier to know when

the upload is complete. If a restart is required, a prompt will display.

atlona.com

14

Toll free: 1-877-536-3976

Local: 1-408-962-0515

The firmware page displays the matrix, HDBaseT transmitter chips, and HDBaseT receivers firmware version and provides an easy way to update.

Download the most current firmware from http://atlona.com/product/AT-UHD-PRO3-66M. Once the firmware is on the computer use the browse button to select the correct file. Press the update button and a progress bar will display. If a restart is required, the WebGUI will display a prompt.

The network page enables the matrix IP settings to be altered. If a static IP is required, then DHCP needs to be turned off. Once off, the settings will be available to change.

Login mode, when on, will request a password whenever a control device is connected to the matrix.

atlona.com

15

Toll free: 1-877-536-3976

Local: 1-408-962-0515

The control page will allow simple functions to be changed. Turn the matrix on/off, IR front panel receiver window on/off, and front panel key lock on/off. The time zone and baud rates

(for matrix and zone outputs)

can be altered as well.

The Users page allows non-admin users to be added or the admin username and password to be changed.

Only 3 non-admin users can be added. Type in the username and password to the fields and press add. Users will not have the ability to access this page.

Admin password

(default username=”root” and password=”Atlona”)

can also be changed. Be sure to write this information down as admin is the only profile allowed to add/remove users.

atlona.com

16

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Note: Default label is Input_X or Output_X.

Labels will follow corresponding ports.

Ex. Input 6 will default to label Input_6

The I/O page makes an easy way to set up input and output routing and labeling.

The inputs and outputs have the option for labeling to help make routing and switching simpler.

Label each input and output individually. Select what source or zone that is to be labeled, type the name in the box, and press change.

Note: Labels are limited to 16 characters and no spaces

I/O routing includes mirror mode for the HDMI ports.

Mirror Mode:

On - HDBaseT outputs are selectable from the drop down menu. The HDMI port will output the same audio and video of the selected HDBaseT output

Off - Any of the connected inputs are selectable from the drop down menu. The HDMI port will output audio and video from the source to a local display.

atlona.com

17

Toll free: 1-877-536-3976

Local: 1-408-962-0515

The Route Memory page provides set up, labeling, and configuration of multiple preset memories for fast and easy control.

Set Up

- Select Route Memory # from the ‘Preset Select’ drop down menu

- Set the input/output routes

- Save to memory

- Label the route memory preset

- Repeat as needed until all route memories are saved

Note: Switching does not occur during the set up and labeling of route memory.

To apply route memory to the matrix: Select the route memory # from the memory selection drop down menu and press the ‘Select’ button.

atlona.com

18

Toll free: 1-877-536-3976

Local: 1-408-962-0515

The EDID page is used for saving EDIDs, loading EDIDs, or using internal EDIDs on the input ports.

Each output will have an individual EDID that can be saved to memory. The matrix has 8 available

EDID memory presets. Each display EDID can be saved to the corresponding memory number.

e.g. Output 2 to EDID memory 2. Once saved, the EDIDs can be loaded to the input to ensure compatibility.

Internal EDIDs can also be loaded to inputs. There are 14 internal EDIDs. The list can be found on page 11.

The HDCP page provides a quick way to see whether a display is HDCP compliant or not and the version supported. This page will give multiple status readouts: No Connection, Compliant 1.X,

Compliant 2.X, and Non-Compliant.

atlona.com

19

Toll free: 1-877-536-3976

Local: 1-408-962-0515

The audio page supports adjustment of 5 band EQ for the analog audio outputs ensuring the best audio performance for each zone. 5 band frequency options at 63Hz, 250Hz, 1kHz, 4kHz, and

8kHz as well as zone output volume and mute.

atlona.com

20

Toll free: 1-877-536-3976

Local: 1-408-962-0515

RS-232

Connection

RS-232 pin out will be determined by the RS-232 cable and will connect as Rx

(receiver)

, Tx

(transmitter)

, and

(ground)

.

(See picture 1)

RX TX

RS-232

1

Wire color will differ by cable manufacturer.

5 4 3 2 1

RS-232 is often connected through a DB 9-pin to captive screw connector. The pins will have functions associated with them, some will be unassigned.

Note: Typical DB9 connectors use pin 2 for TX, pin 3 for RX, and pin 5 for ground. On some devices functions of pins 2 and 3 are

reversed.

9 8 7 6

Set Up

To set up the RS-232 hyperterminal

(if not using 3rd party software)

use the following steps:

1. Connect the UHD-PRO3-66M to a PC using a DB9

(Stripped and connected to 3pin captive screw)

to

USB cable

2. Go to the Device Manager folder

(see picture A)

3. Find the UHD-PRO3 COM port and right click with a mouse and select properties

(see picture B)

Note: If unsure which COM port is the UHD-PRO3, unplug the cable and plug it back in. It will disappear and

reappear on the COM port list.

4. Under the properties menu select the port settings tab and update the menu to the

UHD-PRO3-66M default settings of: Bits Per Second: 115200, Data Bits: 8, Parity: None,

Stop Bits: 1 and Flow Control: None.

(see picture C)

Set up is done and any hyperterminal program may be used to control the UHD-PRO3 now.

A B C

atlona.com

21

Toll free: 1-877-536-3976

Local: 1-408-962-0515

RS-232 & TCP/IP Control Commands

The command codes are case sensitive, do not change capitalization, spacing, or lettering.

Command

PWON

PWOFF

PWSTA

Version

Type

Lock

Unlock

All# x1$ Y x1All x1AVx2

e.g. x3AVx7 x1AVx2,x3,x4

e.g. x3AVx1,x4

MirrorHdmiX OutY

Feedback

PWON

PWOFF

PWx

Firmware #

Model #

Lock

Unlock x1AVx1,x2AVx2,...

x1AVx2

e.g. x3AVx7 x1AVx2,x3,x4

e.g. x3AVx1,x4

MirrorHdmiX OutY

UnMirrorX

e.g. UnMirror6

VOUTX +

e.g. VOUT2 +

VOUTX -

e.g. VOUT3 -

VOUTX (YY)

e.g. VOUT1 (-50)

VOUTX sta

VOUTMuteX Y

e.g. VOUTMute2 on

IROFF

IRON

Statusx1

Status

SaveY

e.g. Save2

RecallY

e.g. Recall2

ClearY

e.g. Clear2

Mreset

RS232zoneX[command]

UnMirrorX

e.g. UnMirror6

VOUTX (YY)

e.g. VOUT2 (-70)

VOUTX (YY)

e.g. VOUT3 (12)

VOUTX (YY)

e.g. VOUT1 (-50)

VOUTX (YY)

VOUTMuteX Y

e.g. VOUTMute2 on

IROFF

IRON x7AVx1 x1AVx1,x2AVx2, x3AVx4, ....

SaveY

e.g. Save2

RecallY

e.g. Recall2

ClearY

e.g. Clear2

Mreset

RS232zoneX[command]

e.g. RS232zone1[PWRO] x1$ Y x1All

e.g. RS232zone1[PWRO]

Description

Power on

Power off

Will display the power status of the matrix

e.g. Power is on, feedback will be PWON

Brings up the current firmware version

Brings up the model information

Locks the front panel of the matrix so no buttons are active

Unlocks the front panel of the matrix, enabling the buttons again

Resets all inputs to corresponding outputs

e.g. input 1 to output 1, input 2 to output 2, input 3 to output 3, etc

Changes status of output channel Y= on/off/sta

e.g. to turn off output 3 = x3$

Sets selected input to all outputs

e.g. x3All would set input 3 to all

Switch input to output

e.g. input 3 to output 7

Switch input to multiple outputs

e.g. Switch input 3 to output 1 and 4

Mirror the HDMI output port with an HDBaseT output port

e.g. Mirror HDMI 6 with Output 1: MirrorHdmi6 Out1

Removes the chosen HDMI port from mirror mode

e.g. Unmirror HDMI 6 and no longer follows an HDBaseT output

Turns the volume of the chosen output (X) up one step

e.g. Turn the volume up from level -71dB to -70dB on analog output 2

Turns the volume of the chosen output (X) down one step

e.g. Turn the volume down from level 13dB to 12dB on analog output 3

Set the volume of the chosen output (X) to a specific (YY) level

e.g. Set the volume to -50dB on output 1

Displays the current volume level of the chosen output (X)

Mute the volume level of the chosen analog output Y=on,off,sta

e.g. Mute the volume of analog output 2

Disables the front panel IR receiver window

Enables the front panel IR receiver window

Shows what input is connected to selected output

Displays which inputs are currently connected to which outputs

Saves I/O route settings for future use, preset options 0 to 8

Recalls saved I/O route settings for the chosen preset number

Erases the saved I/O route settings for the chosen preset number

Sets matrix back to the default settings

Send commands to devices connected to the receiver RS-232 ports.

Commands are the same as the ones stated in this table. X = zone #

e.g. Turning the power on for the device connected in zone 1

Each command or feedback is terminated with a carriage return.

Note: If the command fails or is incorrect the feedback should be “Command FAILED”

To help with zone troubleshooting the matrix will broadcast “#*PORTXX_[feedback]” when receiving any feedback from any zone.

atlona.com

22

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Command

IPCFG

IPTimeout XX

e.g. IPTimeout120

IPQuit

IPAddUser

IPAddUser X Y

IPDelUser X

IPDHCP sta

IPDHCP on

IPDHCP off

IPStatic X Y Z

IPPort

IPLogin sta

IPLogin on

IPLogin off

Broadcast sta

Broadcast on

Broadcast off

IR Remote Control

Feedback

IP Addr : x.x.x.x

Netmask : x.x.x.x

Gateway : x.x.x.x

IP Port: x.x.x

IPTimeout XX

e.g. IPTimeout120

Description

Displays IP address configuration

IPQuit

TCP/IP username & password list:

- user password

- user password

- user password

TCP/IP user was added

Determines amount of seconds of inactivity before TCP/IP disconnects

Logs out of TCP/IP

Will display a list of users

TCP/IP user was deleted

Add a user for TCP/IP control. X=User Y=Password

Ex. IPAddUser Atlona 1234 (User=Atlona 1234=Password)

Delete a user from TCP/IP X=User (Ex. IPDelUser Atlona)

IPDHCP sta

Ex. IPDHCP on

IPDHCP on

IPDHCP off

Displays the status of DHCP

Turns DHCP on

Turns DHCP off

IPStatic address netmask gateway Sets a static IP address

Ex. IPStatic 192.168.1.1 255.255.255.0 192.168.1.200

IPPort Y

IPLogin sta

e.g. IPLogin on

IPLogin on

IPLogin off

Broadcast sta

Broadcast on

Broadcast off

Set the TCP/IP port (ex. IPPort 230)

Displays IPLogin status

e.g. IPLogin is on

Enables IPLogin

Disables IPLogin

Displays broadcast mode status

Enables broadcast mode

Disables broadcast mode

13

+

On

1

5

9

13

1

5

9

Power

2

Input

3

6 7

10 11

14

Output

15

2

3

6 7

10

14

-

Volume

15

AT-MRC

11

Off

4

8

12

16

4

8

12

16

Turn the Matrix on or off

(standby)

.

Input selection. Numbers correspond with the HDMI inputs

(1-6) on the matrix.

Output selection. Numbers correspond with the outputs

(1-8)

on the matrix.

Volume control. Adjust analog audio output volume up and down or mute.

Note: Do not use any other battery than what is provided by Atlona. If the

battery does not work, please contact Atlona for a replacement.

atlona.com

23

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Captive Screw

Captive screw connectors are an added feature on the UHD-PRO3 matrix. The captive screw connectors allow you to cut cables down to a suitable length, reducing cable clutter while providing a more reliable connection.

Connecting

When connecting the cables to the female captive screw connector it is important that the wires be terminated correctly. The female captive screw connector has a contact plate at the top and must have the wires touching it for signal to pass. When wired correctly

(see picture A)

the signal will pass, incorrectly

(see picture B)

no signal will pass.

A

B

The captive screw connectors have a contact bar that is adjusted to compress the wire against the top contact plate. Use the screws at the top of the connector to compress the wire against the contact plate.

Clockwise

Turn the screws clockwise to raise the contact bar to the upper contact plate and hold the wires in place.

Counter

Clockwise

Turn the screws counter clockwise to lower the contact bar to release the wires.

Two types of female captive screw connectors have been included: 4 pin

(IR and Audio) and 5 pin

(RS-232/IR)

.

Audio and IR

RS-232/IR

The wires of the emitter is marked to differenciate pin outs.

Note: To view pin outs of audio and RS-232, see pages 7 and 21.

Signal (S)

Ground (

)

The IR emitter

(

AT-IR-CS-TX sold separately

) has two wires: signal and ground. Signal will have a solid line and ground will be blank. The IR emitter will plug into the IR OUT ports.

Note: One AT-IR-CS-TX is included with the AT-UHD-EX-70C-RX (receiver) and AT-UHD-EX-100CE-RX (receiver).

Signal (S)

Ground (

)

There are two wires on the IR captive screw ready cable

(AT-LC-CS-IR-2M sold separately)

: signal and ground. The signal wire is red and ground wire is black. The IR cable will plug into the IR IN ports and connect to third party control systems.

atlona.com

24

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Specifications

Video Resolutions

Video 4096x2160@24/25/30/50*/60Hz*, 3840x2160@24/25/30/50*/60Hz* (UHD),

2048x1080p,

1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i

VESA 2560x2048, 2560x1600, 2048x1536, 1920x1200, 1680x1050, 1600x1200,

1600x900, 1440x900, 1400x1050, 1366x768, 1360x768, 1280x1024,

1280x800, 1280x768, 1152x768, 1024x768, 800x600, 640x480

Colorspace

Chroma Subsampling 4:4:4, 4:2:2, 4:2:0*

Color depth 8-bit, 10-bit, 12-bit

Audio

Analog Out PCM 2Ch (de-embedded)

HDMI/HDBaseT Out PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus,

Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos

Sample Rate

Bit rate

Distance

Ports 1-2:

CAT5e/6 @ 4K

CAT6a/7 @ 4K

32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz up to 24-bit up to 70M up to 100M

CAT5e/6 @ 1080p up to 100M up to 230 ft up to 328 ft up to 328 ft

Ports 3-5,7:

CAT5e/6 @ 4K

CAT6a/7 @ 4K up to 35 meters up to 40 meters

CAT5e/6 @ 1080p up to 60 meters

CAT6a/7 @ 1080p up to 70 meters

HDMI IN/OUT

4K

1080p

Signal Support

Bandwidth up to 5 meters up to 10 meters up to 115 feet up to 130 feet up to 197 feet up to 230 feet up to 15 feet up to 30 feet

HDCP

Temperature

Power

Humidity 20 to 90% non-condensing

Idle Consumption 75W

Supply

Dimension

H x W x D w/feet 99.02 x 439.74 x 301.63 (mm)

H x W x D w/rack ears 88.63 x 482.60 x 301.63 (mm)

Rack

Weight

Device

Certification

Product CE, FCC, RoHS, RCM, TUV

3.90 x 17.31 x 11.88 (inch)

3.49 x 19.00 x 11.88 (inch)

*4096x2160@50/60Hz & 3840x2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only atlona.com

25

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Safety Information

Safeguards

To reduce the risk of electric shock, do not expose this product to rain or moisture

Do not modify the wall plug. Doing so will void the warranty and safety features.

If the wall plug does not fit into your local power socket, hire an electrician to replace your obsolete socket.

This equipment should be installed near a grounded socket outlet and the device should be easily accessible in the case it requires disconnection.

Precautions

FCC regulations state that any unauthorized changes or modifications to this equipment, not expressly approved by the manufacturer, could void the user’s authority to operate this equipment.

In the event of an electrostatic discharge this device may automatically turn off. If this occurs, unplug the device and plug it back in.

Protect and route power cords so they will not be stepped on or pinched by anything placed on or against them. Be especially careful of plug-ins or cord exit points from this product.

Avoid excessive humidity, sudden temperature changes or temperature extremes.

Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements, fish tanks, and swimming pools.

Use only accessories recommended by Atlona to avoid fire, shock, or other hazards.

Unplug the product before cleaning. Use a damp cloth for cleaning and not cleaning fluid or aerosols. Such products could enter the unit and cause damage, fire, or electric shock. Some substances may also mar the finish of the product.

Never open, remove unit panels, or make any adjustments not described in this manual. Attempting to do so could expose you to dangerous electrical shock or other hazards. It may also cause damage to your product. Opening the product will void the warranty.

Do not attempt to service the unit. Disconnect the product and contact your authorized Atlona reseller or contact Atlona directly.

atlona.com

26

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Atlona, Inc. (“Atlona”) Limited Product Warranty Policy

Coverage

Atlona warrants its products will substantially perform to their published specifications and will be free from defects in materials and workmanship under normal use, conditions and service.

Under its Limited Product Warranty, Atlona, at its sole discretion, will either:

A) repair or facilitate the repair of defective products within a reasonable period of time, restore products to their

proper operating condition and return defective products free of any charge for necessary parts, labor and shipping

OR

B) replace and return, free of charge, any defective products with direct replacement or with similar products deemed

by Atlona to perform substantially the same function as the original products

OR

C) refund the pro-rated value based on the remaining term of the warranty period, not to exceed MSRP, in cases

where products are beyond repair and/or no direct or substantially similar replacement products exist.

Repair, replacement or refund of Atlona’s products is the purchaser’s exclusive remedy and Atlona’s liability does not extend to any other damages, incidental, consequential or otherwise.

This Limited Product Warranty extends to the original end-user purchaser of Atlona’s products and is non-transferrable to any subsequent purchaser(s) or owner(s) of these products.

Coverage Periods

Atlona’s Limited Product Warranty Period begins on the date of purchase by the end-purchaser. The date contained on the end-purchaser ‘s sales or delivery receipt is the proof purchase date.

Limited Product Warranty Terms – New Products

• 10 years from proof of purchase date for hardware/electronics products purchased on or after June 1, 2013

• 3 years from proof of purchase date for hardware/electronics products purchased before June 1, 2013

• Lifetime Limited Product Warranty for all cable products

Limited Product Warranty Terms – Refurbished (B-Stock) Products

• 3 years from proof of purchase date for all Refurbished (B-Stock) hardware and electronic products purchased on or

after June 1, 2013

Remedy

Atlona recommends that end-purchasers contact their authorized Atlona dealer or reseller from whom they purchased their products. Atlona can also be contacted directly. Visit www.atlona.com for Atlona’s contact information and hours of operation. Atlona requires that a dated sales or delivery receipt from an authorized dealer, reseller or end-purchaser is provided before Atlona extends its warranty services. Additionally, a return merchandise authorization (RMA) and/or case number, is required to be obtained from Atlona in advance of returns.

Atlona requires that products returned are properly packed, preferably in the original carton, for shipping. Cartons not bearing a return authorization or case number will be refused. Atlona, at its sole discretion, reserves the right to reject any products received without advanced authorization. Authorizations can be requested by calling 1-877-536-3976 (US toll free) or 1-408- 962-0515 (US/international) or via Atlona’s website at www.atlona.com.

Exclusions

This Limited Product Warranty excludes:

• Damage, deterioration or malfunction caused by any alteration, modification, improper use, neglect, improper

packing or shipping (such claims must be presented to the carrier), lightning, power surges, or other acts of nature.

• Damage, deterioration or malfunction resulting from the installation or removal of this product from any installation,

any unauthorized tampering with this product, any repairs attempted by anyone unauthorized by Atlona to make

such repairs, or any other cause which does not relate directly to a defect in materials and/or workmanship of this

product.

• Equipment enclosures, cables, power supplies, batteries, LCD displays, and any accessories used in conjunction with

the product(s).

• Products purchased from unauthorized distributors, dealers, resellers, auction websites and similar unauthorized

channels of distribution.

atlona.com

27

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Disclaimers

This Limited Product Warranty does not imply that the electronic components contained within Atlona’s products will not become obsolete nor does it imply Atlona products or their electronic components will remain compatible with any other current product, technology or any future products or technologies in which Atlona’s products may be used in conjunction with. Atlona, at its sole discretion, reserves the right not to extend its warranty offering in instances arising outside its normal course of business including, but not limited to, damage inflicted to its products from acts of god.

Limitation on Liability

The maximum liability of Atlona under this limited product warranty shall not exceed the original Atlona MSRP for its products. To the maximum extent permitted by law, Atlona is not responsible for the direct, special, incidental or consequential damages resulting from any breach of warranty or condition, or under any other legal theory. Some countries, districts or states do not allow the exclusion or limitation of relief, special, incidental, consequential or indirect damages, or the limitation of liability to specified amounts, so the above limitations or exclusions may not apply to you.

Exclusive Remedy

To the maximum extent permitted by law, this limited product warranty and the remedies set forth above are exclusive and in lieu of all other warranties, remedies and conditions, whether oral or written, express or implied. To the maximum extent permitted by law, Atlona specifically disclaims all implied warranties, including, without limitation, warranties of merchantability and fitness for a particular purpose. If Atlona cannot lawfully disclaim or exclude implied warranties under applicable law, then all implied warranties covering its products including warranties of merchantability and fitness for a particular purpose, shall provide to its products under applicable law. If any product to which this limited warranty applies is a “Consumer Product” under the Magnuson-Moss Warranty Act (15 U.S.C.A. §2301, ET SEQ.) or other applicable law, the foregoing disclaimer of implied warranties shall not apply, and all implied warranties on its products, including warranties of merchantability and fitness for the particular purpose, shall apply as provided under applicable law.

Other Conditions

Atlona’s Limited Product Warranty offering gives legal rights, and other rights may apply and vary from country to country or state to state. This limited warranty is void if (i) the label bearing the serial number of products have been removed or defaced, (ii) products are not purchased from an authorized Atlona dealer or reseller. A comprehensive list of

Atlona’s authorized distributors, dealers and resellers can be found at www.atlona.com .

Atlona, Inc Product Registration

Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few moments to register your new purchase.

Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware updates.

At Atlona we respect and protect your privacy, assuring you that your registration information is completely secure. Atlona product registration is completely voluntary and failure to register will not diminish your limited warranty rights.

To register go to: http://www.atlona.com/registration atlona.com

28

Toll free: 1-877-536-3976

Local: 1-408-962-0515