OKI PT330 Installation manual
OKI PT330 is a high-quality printer that offers a range of features to meet your printing needs. With its compact size and easy-to-use design, the PT330 is perfect for home or office use. The PT330 produces sharp, professional-looking prints with a resolution of up to 1200 x 1200 dpi. It also features a variety of printing options, including borderless printing and duplex printing. The PT330 is also compatible with a range of media types, including photo paper, transparencies, and envelopes. With its fast print speeds and low running costs, the PT330 is a great choice for anyone looking for a reliable and affordable printer.
Advertisement
Advertisement
PT330/PT331
Printer Driver
Installation Guide -1
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
Table of Contents
Copyright (C) 2012 Oki Data Corporation 1 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
1 Introduction
This document describes how to install the printer drivers and associated software for the case when running the installer displays the following screen (*1).
(*1)
If the following installer screen (*2) appears instead, please refer to "PT330-331_InstallGuide2_en.pdf" located in the "Manual" folder.
(*2)
Screen (*1) appears when you start the installer if .NET Framework 2.0 is already installed on your computer. Otherwise screen (*2) is displayed.
Installation of the printer drivers and associated software is easier using the (*1) installer. (recommended)
If ".NET Framework 2.0" is not already installed on your computer, please download it from the Microsoft web site and install.
Copyright (C) 2012 Oki Data Corporation 2 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
2 Installer
2.1 Overview
This installer program is used to install the Windows driver, OPOS driver, and other software. You can also use it to view the manual.
2.2 Installed software
This installer is used to install the following drivers and software.
Software
Windows driver
OPOS driver
Utility
Status Monitor
Quick Setup
PR-Port Manager
Admin Manager
Description
Printer driver for printing from Windows applications (Word,
Excel, etc.)
Printer driver for developing POS systems that comply with the OPOS (OLE POS Technology Council) specification.
Utility software to remotely configure printer settings from PC.
Software to display the status of the printer.
* Windows driver installation is required.
Used to set the printer IP address for the LAN interface.
Software used to create ports for printing from the Windows driver via the LAN interface.
Software for managing the LAN interface and specifying detailed settings.
2.3 Trademarks
All company names and product names contained in this manual are registered trademarks or trademarks of their respective owners.
Copyright (C) 2012 Oki Data Corporation 3 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
2.4 System requirements
This installer runs on the following operating systems.
Product name
Microsoft® Windows® 2000
Microsoft® Windows® XP
Microsoft® Windows Vista®
Microsoft® Windows® 7
Microsoft® Windows Server® 2003
Microsoft® Windows Server® 2008
Microsoft® Windows Server® 2008 R2
Edition
Professional
Server
Professional
Home Edition
Enterprise
Business
Ultimate
Home Premium
Home Basic
Ultimate
Enterprise
Professional
Home Premium
Starter
Enterprise
Standard
Enterprise
Standard
Enterprise
Standard
Language
English
Abbreviations
Windows 2000
*1
Windows XP
*1
Windows Vista
Windows 7
Server 2003
Server 2008
Server 2008 R2
― WEPOS
Microsoft® Windows® Embedded for
Point of Service
Microsoft® Windows® Embedded
POSReady 2009
―
WEPOS 2009
*2
*1) Windows 2000/Windows XP (SP1, SP2)
The installer requires ".NET Framework 2.0" or later.
If not already installed, please download ".NET Framework 2.0" from the Microsoft web site and install.
Quick Setup, PR-Port Manager and Admin Manager are not supported.
Copyright (C) 2012 Oki Data Corporation 4 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
3 Installation
3.1 How to use this manual
The procedures for performing the operations listed below are different depending on your OS. Please refer to the instructions for the OS you are using.
Printer folder
OS Procedure
Windows 7
Server 2008 R2
Windows Vista
Server 2008
Windows XP
/ Server 2003
/ WEPOS
/ WEPOS 2009
Windows 2000
Printer properties
OS
Windows 7
/ Server 2008 R2
Windows Vista
/ Server 2008 desktop screen.
(2) Click [Devices and Printers].
Click [Start]
[Devices and Printers]. desktop screen.
(2) Click [Control Panel]
[Hardware and Sound] [Printers].
Click [Start]
[Control Panel] [Hardware and Sound] [Printers].
Click [Start]
[Printers and Faxes].
* For Windows XP Home Edition
Click [Start]
[Control Panel] [Printers and Other Hardware].
Click [Start]
[Settings] [Printers].
Procedure
Right-click the "PT330-331 Raster" printer and then click [Printer
Properties].
Right-click the "PT330-331 Raster" printer and then click [Run as administrator]
[Properties].
* If you logged on to Server 2008 using the built-in administrator account, right-click the "PT330-331 Raster" printer and then click
[Properties].
Windows XP
/ Server 2003
/ WEPOS
/ WEPOS 2009
/ Windows 2000
Right-click the "PT330-331 Raster" printer and then click
[Properties].
Copyright (C) 2012 Oki Data Corporation 5 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
All programs
OS
Windows 7 / Vista
Server 2008 R2
/ Server 2008
/ Windows XP
/ Server 2003
/ WEPOS
/ WEPOS 2009
Windows 2000
Procedure
Click the Windows logo button in the lower-left corner of the desktop screen and then click [All Programs].
Select [Start]
[All Programs].
Select [Start]
[Programs].
Uninstall a program
OS
Windows 7 / Vista
Server 2008 R2
/ Server 2008
Windows XP
/ Server 2003
/ WEPOS
/ WEPOS 2009
Windows 2000
Procedure
desktop screen.
(2) Click [Control Panel]
[Uninstall a program].
Click [Start]
[Control Panel] [Uninstall a program].
Click [Start]
[Control Panel] [Add or Remove Programs].
Click [Start]
[Settings] [Control Panel] [Add/Remove
Programs].
Copyright (C) 2012 Oki Data Corporation 6 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
3.2 Before starting the installation
When you install a driver, you must log on using an account with Administrative privileges.
If the printer drivers or associated software are already installed:
If the drivers and software for the PT330/PT331 printer are already installed on your computer, uninstall them before proceeding.
For more information about how to uninstall, see "5. Uninstallation."
Please turn off the printer before you install the driver.
The "Found New Hardware Wizard" screen might appear even if the printer turned on power.
In that case, click "Cancel" and close the screen.
When you use the Windows driver on a LAN
To use the Windows driver on a LAN, the "PR-PortManager" print client software must be installed.
Refer to "3.3 Installation procedures" and install "PR-PortManager" after installing the Windows driver, and then allocate a port to the printer driver.
* For more information about how to install "PR-PortManager", see "CHAPTER 3 USING THE
LAN CARD IN A WINDOWS 2000/XP/VISTA/7/WINDOWS SERVER 2003/2008/2008
R2/WEPOS ENVIRONMENT" in the LAN Card Online Manual.
Setup may fail if you are using anti-virus security software because the printer cannot be found.
In this case, exit setup and add "Quick Setup", "AdminManager", and "PR-PortManager" to the list of exception programs in the anti-virus security software’s firewall configuration. Alternatively, temporarily disable the firewall feature and then restart setup.
If using the Windows driver on a LAN, clear the [Enable bidirectional support] checkbox on the
[Ports] tab in the printer properties.
Copyright (C) 2012 Oki Data Corporation 7 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
3.3 Installation procedures
3.3.1 Driver Installation
Use the following procedure to install the software.
* If the [User Account Control] dialog box is displayed, click [Yes] or [Continue].
For Windows 7/Windows Vista/Server 2008 R2/Server 2008
Insert the "PT330-331" into your PC's
CD-ROM drive.
Click [Run setup.exe] when the "Auto
Play" screen is displayed.
* If the menu screen does not
appear, run "setup.exe" on this
CD.
For Windows 7/Server 2008 R2
For Windows Vista/Server 2008
If the [User Account Control] dialog box is displayed, click [Yes] or
[Continue].
After reading the license agreement, click [I Agree].
Copyright (C) 2012 Oki Data Corporation 8 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
Click “Install Driver”.
(1)
(3)
(2)
(1) Select the software you want to install.
(2) If you want to install the Windows driver, click the interface being used.
(3) Click [Install].
* For install the OPOS Driver or
Windows driver on a Serial or LAN
Connect the PC and printer, then turn the printer’s power on. (*1)
A screen appears indicating that the installation is in progress. Please wait for the installation to complete.
Go to step “7” if you install the
Windows driver on a USB.
Go to step “12” if you install the OPOS
Driver or Windows driver on a Serial or LAN.
Copyright (C) 2012 Oki Data Corporation 9 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
*1) When using the OPOS driver with a USB or Parallel interfece
The new hardware is detected automatically when you turn on the printer.
Please follow the instructions below.
For Windows 7 / Server 2008 R2
(1)The message "Installing device driver software" is displayed in a balloon (lower right corner of the screen).
(2)After a while, the message "Device driver software was not successfully installed" is displayed.
This is not a problem.
For Windows Vista / Server 2008
(1)The "Found New Hardware" screen is displayed, select [Don't show this message again for this device].
* When "User Account Control" screen is displayed, select [Continue].
For Windows XP / Server 2003 / WEPOS / WEPOS2009
(1)The "Found New Hardware Wizard" screen is displayed. Select [No, not this time] and then click
[Next].
(2)When "What do you want the wizard to do?" is displayed, select [Install from a list or specific location] and then click [Next].
(3)Select [Search for the best driver in these locations], clear the all checkbox and then click
[Next].
(4)When "Cannot Install this Hardware" is displayed, click [Don't prompt me again to install this software] and then click [Finish].
For Windows 2000
(1)The "Found New Hardware Wizard" screen is displayed, click [Next].
(2)When "What do you want the wizard to do?" is displayed, select [Search for a suitable driver for my device] and then click [Next].
(3)When [Locate Driver Files] is displayed, clear all checkboxes and then click [Next].
(4)When "Driver Files Search Results" is displayed, select [Disable the device] and then click
[Finish].
Copyright (C) 2012 Oki Data Corporation 10 of 33
For you install the Windows driver on a USB
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
Click “Next”.
Click “Finish”.
For Windows 7/Windows Vista/Server 2008 R2/Server 2008
Connect the PC and printer, then turn the printer’s power on.
The message "Installing device driver software" is displayed in a balloon
(lower right corner of the screen). No operation is required.
For other OS : (*2)
When the installation is complete,
"Your device is ready to use" is displayed and the procedure ends automatically.
Copyright (C) 2012 Oki Data Corporation 11 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
*2) When the "Found New Hardware Wizard" is displayed:
For Windows XP/Windows 2003/WEPOS/WEPOS 2009
(1) The "Found New Hardware Wizard" screen is displayed. Select [No, not this time] and then click [Next].
(2) When "What do you want the wizard to do?" is displayed, select [Install the software automatically] and then click [Next].
(3) When "Hardware Installation" is displayed, click [Continue Anyway].
* When the “Files Needed" is displayed, click the [Browse] button to select folder
“\Drivers\Windows\x32\PT3301.XPB” of drive D: and click the [OK].(When the CD-drive is
D.)
(For 64-bit Windows, the path is "\Drivers\Windows\x64\PT3301.XPB ")
(4) When "Completing the Found New Hardware Wizard" is displayed, click [Finish].
For Windows 2000
When using a USB interface.
(1) The "Found New Hardware Wizard" screen is displayed. Select [No, not this time] and then click [Next].
(2) When "What do you want the wizard to do?" is displayed, select [Search for a suitable driver for my device] and then click [Next].
(3) When "Locate Driver Files" is displayed, clear the all checkbox and then click [Next].
(4) When "Driver Files Search Results" is displayed, click [Next].
(5) When "Digital Signature Not Found" is displayed, click [Yes].
(6) When "Completing the Found New Hardware Wizard" is displayed, click [Finish].
When using a Parallel interface.
(1) When "Digital Signature Not Found" is displayed, click [Yes].
*3) When using a USB interface
The "Found New Hardware Wizard" screen might not appear even if the printer turned on power.
In that case, keep the power on the printer, then restart the PC's.
Copyright (C) 2012 Oki Data Corporation 12 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
For you install the OPOS driver or Windows driver on a Serial or LAN
Installation Complete.
(1) Windows driver installation
(2) OPOS driver installation
This message is displayed after the
Windows driver or OPOS driver installation completes. Follow the on-screen instructions and click
[Yes].
Note:
If you have any unsaved work on the computer, please save it before restarting.
Follow the instructions in "4. How to Check the Installation" to confirm that the driver was installed successfully.
*4) When using the Windows driver on a LAN
The Windows driver installation sets the [Ports] setting to [LPT1] by default. To use the driver on a LAN, use "PR-PortManager" to allocate a port to the printer driver.
* For more information about how to use "PR-PortManager", see "CHAPTER 3 USING THE LAN CARD
IN A WINDOWS 2000/XP/VISTA/7/WINDOWS SERVER 2003/2008/2008 R2/WEPOS
ENVIRONMENT" in the LAN Card Online Manual.
Also, clear the [Enable bidirectional support] checkbox on the [Ports] tab in the printer properties before using it.
Copyright (C) 2012 Oki Data Corporation 13 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
3.3.2 Software Utilities
Use the following procedure to install the software utilities.
Click “Install Printer Utility” or “Install
Status Monitor”.
If the screen on the left appears during the installation, follow the instructions in the wizard to install
Printer Utility or Status Monitor.
Copyright (C) 2012 Oki Data Corporation 14 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
3.3.3 Network Software
Use the following procedure to install or run the network software.
Click “Run Quick Setup”, “Install
Admin Manager” or “Install PR-Port
Manager”.
If the screen on the left appears during the installation, follow the instructions in the wizard to install
Printer Utility or Status Monitor.
* For more information about how to install and use “Network Software” see the LAN Card Online Manual.
* When using port made by “PR-PortManager”, please clear the “Enable bidirectional support” check box in the printer properties for the Windows driver.
Copyright (C) 2012 Oki Data Corporation 15 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
4 How to Check the Installation
4.1 Windows driver
4.1.1 Installation confirmation
Use the following procedure to confirm that the Windows driver installed successfully.
Open the [Printer Folder] (*) screen.
* See the [Printer folder] procedure in "3.1 How to use this manual" for instructions on how to open the screen in each
OS.
Open the [Printer Properties] (*) for the "PT330-331 Raster."
* See the [Printer property] procedure in "3.1 How to use this manual" for instructions on how to open the printer properties in each OS.
Copyright (C) 2012 Oki Data Corporation
On the "PT330-331 Raster" property screen, click [Print Test
Page].
This prints the test page.
* If the test page does not print correctly, refer to "4.1.2 If the test page does not print."
16 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
*1) For Server 2003
W When you install the printer may have been set to a shared printer.
If you do not set the shared printer, follow the instructions below.
(1) Open the [Printer Folder]
(2) Open the "PT330-331 Raster" properties, and then click the [Sharing] tab.
(3) Select [Do not shre this printer], and then click [OK].
Copyright (C) 2012 Oki Data Corporation 17 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
4.1.2 If the test page does not print
When using a Serial, USB, or LAN interface connection
Check the following.
Confirm that the paper has been correctly inserted in the printer.
Confirm that the top cover is closed.
Confirm that the interface cable is connected.
Confirm that the printer power is turned on.
(If it is already turned on, turn it off and on again.)
If the printer status is offline, use the follow procedures to bring the printer online.
How to check and set the printer online/offline status:
(1) Open the [Printer Folder].
* See the [Printer folder] procedure in "3.1 How to use this manual" for instructions on how to open the screen in each OS.
(2) Perform the following steps for the OS you are using.
For Windows 7/Server 2008 R2
• Right-click the "PT330-331 Raster" printer in the printers and faxes section and then click [See what's printing]. If the [Use Printer Offline] checkbox in [Printer] is selected, clear it.
For Windows Vista/Server 2008
• Right-click the "PT330-331 Raster" printer and then click [Run as administrator]. Click [Use
Printer Online] if it is displayed.
* Log on using an Administrator account, right-click the "PT330-331 Raster" printer, and then click
[Use Printer Online] if it is displayed.
For Windows XP/Server 2003/WEPOS/WEPOS 2009
• Right-click the "PT330-331 Raster" printer and then click [Use Printer Online] if it is displayed.
For Windows 2000
• Right-click the "PT330-331 Raster" printer and then clear the [Use Printer Offline] checkbox if it is selected.
Copyright (C) 2012 Oki Data Corporation 18 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
When using a USB interface connection
The USB port may vary depending on your system configuration.
Use the following procedure to change the printer driver setting and confirm it by printing a test page.
* See "3.1 How to use this manual" for instructions.
(1) Open the [Printer Folder].
(3) Click the [Ports] tab.
(4) The following property screen is displayed.
Example: Change the port from "USB002" to "USB001"
←The [Printer] column is blank for unused ports.
Select the USB port you want to use.
(6) Turn the printer power off.
(7) Turn the printer power on.
(8) Click the [General] tab and then click [Print Test Page].
(9) The test page will be printed.
Copyright (C) 2012 Oki Data Corporation 19 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
4.2 OPOS driver
4.2.1 Installation confirmation
Use the following procedure to confirm that the OPOS driver installed successfully.
* If the [User Account Control] dialog box is displayed, click [Yes] or [Continue].
From All Programs (*), click [Okidata]
[OPOS]
[Printer OPOS Setup].
* See the [All programs] procedure in
"3.1 How to use this manual" for instructions on how to open the screen in each OS.
The [OCX Setup] screen is displayed.
Select the interface you are using and then click [OK].
(2)
(1)
(3)
Configure LAN port settings.
(1) Click [Printer Detection].
(2) Select the printer that appears.
(3) Click [Printer Setting] button.
Copyright (C) 2012 Oki Data Corporation 20 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
The screen on the left appears. Select the port (*), make any other necessary changes, and then click [OK].
This updates the printer settings and completes the setup.
(For more information about the printer setup, refer to the
“Application Programmer's Guide”.)
* See "How to specify the printer port" below for instructions.
For LAN, change only the items because the ports have already
been configured.
Launch OP OPOS Tester by running the following program.
"\Drivers\OPOS\Sample\OP_OPO
S_Tester.exe"
Select an interface.
* For LAN
After selecting [PT330-331LAN] in the interface selection, enter IP address of the interface connected to the printer in [IP Address].
Clicking [Print Test] prints a sample and displays "Test: Success."
If "Test: Fail" is displayed, check the printer power and interface.
How to specify the printer port
For a serial port connection
Select “PT330-331SERPRT” or “PT330-331SER2PRT” in [Device Name].
Select the connected port name (e.g. COM1) in [Port Name].
For a USB port connection
Select “PT330-331USBPRT” or “PT330-331USB2PRT” in [Device Name].
Select the printer's serial number in [Serial Number].
To obtain the serial number, follow the instructions in "4.2.2 Check serial number."
Copyright (C) 2012 Oki Data Corporation 21 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
4.2.2 Check serial number
Use the following procedure to check the serial number.
(1) Load paper in the printer and then close the cover.
(2) Turn the power on while holding down the FEED button. Keep holding it down until printing starts.
(3) Release the FEED button after the following printout is output.
Special Mode
1.Test Print
2.Setup Menu
3.Hex Dump
4.Command Trace
5.Sample Print
6.End
<Set>
Press FEED button for the number of times
as the same as your selecting item, and
wait more than 1 second.
(4) Press the FEED button once and then wait for a second for printing to start.
(5) When printing finishes, turn the power off.
Serial number
PT330-331 Ver1.0
123456
Memory Switch 1
Power On Status
Receive Buffer
Busy Condition
Receive Error
Auto LF
DSR(#6)Reset
INIT(#25)Reset
USB Soft Reset
Memory Switch 2
Cover Open Error
Enable
4KByte
Bufferfull
Disable
Disable
Disable
Enable
Auto Recovery
Copyright (C) 2012 Oki Data Corporation 22 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
4.3 Utility
Use the following procedure to launch the Utility.
* If the [User Account Control] dialog box is displayed, click [Yes] or [Continue].
Click All Programs (*)
[Okidata]
[Utility]
[PT330-331 Utility].
* See the [All programs] procedure in
"3.1 How to use this manual" for instructions on how to open the screen in each OS.
Copyright (C) 2012 Oki Data Corporation
Follow the on-screen instructions to select the name and port for your printer and then click [OK].
The [Printer Setup] screen is displayed.
* For information on how to use the utility, click [Help] and then refer to the
"Utility User's Guide."
23 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
4.4 Status Monitor
Use the following procedure to launch the Status Monitor.
* If the [User Account Control] dialog box is displayed, click [Yes] or [Continue].
Click All Programs (*)
[Okidata]
[Status Monitor]
[PT330-331 Status
Monitor].
* See the [All programs] procedure in
"3.1 How to use this manual" for instructions on how to open the screen in each OS.
A printer icon appears in the task tray if Status Monitor is running.
* The installation adds a Status Monitor shortcut to the “Startup” folder. This causes Status Monitor to start automatically when you log on to the computer.
Copyright (C) 2012 Oki Data Corporation 24 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
4.5 PR-Port Manager
Use the following procedure to start PR-Port Manager (Popup Status Monitor).
* If the [User Account Control] dialog box is displayed, click [Yes] or [Continue].
Click All Programs (*)
[Okidata] →
[PR-PortManager]
[Popup Status
Monitor].
* See the [All programs] procedure in
"3.1 How to use this manual" for instructions on how to open the screen in each OS.
The Popup Status Monitor window opens.
When Popup Status starts, a printer icon appears in the task tray.
* To create a new port for the LAN interface, use the procedure described below to open the [Add
PR-PortManager Port Wizard] window and add a port.
All Programs
[Okidata] → [PR-PortManager] [Add PR-PortManager Port]
Copyright (C) 2012 Oki Data Corporation 25 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
4.6 Admin Manager
Use the following procedure to start AdminManager.
* If the [User Account Control] dialog box is displayed, click [Yes] or [Continue].
Click All Programs (*)
[Okidata] →
[AdminManager]
[AdminManager].
* See the [All programs] procedure in
"3.1 How to use this manual" for instructions on how to open the screen in each OS.
The AdminManager window opens.
* Refer to “Chapter 4 CONFIGURATION-RELATED FUNCTIONS ” in the LAN Card Online Manual for details on how to use the program.
Copyright (C) 2012 Oki Data Corporation 26 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
5 Uninstallation
5.1 Windows driver
Use the following procedure to remove the Windows driver.
5.1.1 For Windows 7/Server 2008 R2
If the [User Account Control] dialog box is displayed, click [Yes].
Uninstall procedure:
Open the [Printer Folder] (*).
* See the [Printer folder] procedure in "3.1 How to use this manual" for instructions on how to open the screen in each
OS.
Select "PT330-331 Raster" in the
[Printers and Faxes] section, and then click [Remove device].
Copyright (C) 2012 Oki Data Corporation
Click [Yes].
27 of 33
Copyright (C) 2012 Oki Data Corporation
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
Select an installed printer (such as
"Fax" or "Microsoft XPS Document
Writer") in the [Printers and Faxes] section and then click [Print server properties].
For Windows 7
Click the [Drivers] tab and then click [Change Driver Settings].
For Server 2008 R2
Click [Drivers].
Select "PT330-331 Raster" from the "Installed printer drivers" list and then click [Remove].
28 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
Select [Remove driver and driver package.] and then click [OK].
Click [Yes].
Click [Delete].
Click [OK] after driver removal completes and then click [Close] to exit the [Print Server Properties] dialog box.
Then, turn off the printer and restart your computer.
Copyright (C) 2012 Oki Data Corporation 29 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
5.1.2 For Windows Vista/Server 2008
If the [User Account Control] dialog box is displayed, click [Continue].
Uninstall procedure:
(1) Open the [Printer Folder].
* See the [Printer folder] procedure in "3.1 How to use this manual" for instructions on how to open the screen in each OS.
(2) Select "PT330-331 Raster" from the "printers folder" and then select [Organize] [Delete].
(3) When "Are you sure you want to delete PT330-331 Raster?" appears, click [Yes].
* If you logged on to Server 2008 using the built-in administrator account, select [Files]
[Server
Properties].
(6) Click the [Drivers] tab, select "PT330-331 Raster" from the "Installed printer drivers" list, and then click [Remove].
(7) When the [Remove Driver And Package] screen is displayed, select [Remove driver and driver package.], and then click [OK].
(8) When the "Deleting this printer driver package will remove it from the system. Are you sure you want to delete PT330-331 Raster?" screen appears, click [Yes].
(9) When the [Remove Driver And Package] screen appears, click [Delete].
(10) Click [OK] after driver removal completes and then click [Close] to exit the [Print Server
Properties] dialog box.
(11) Turn off the printer and restart your computer.
5.1.3 Other OS
Uninstall procedure:
(1) Open the [Printer Folder].
* See the [Printer folder] procedure in "3.1 How to use this manual" for instructions on how to open the screen in each OS.
(2) Select "PT330-331 Raster" from the "printers folder" and then select [File]
[Delete].
(3) When " Are you sure you want to delete PT330-331 Raster?" appears, click [Yes].
(5) Click the [Drivers] tab, select "PT330-331 Raster" from the "Installed printer drivers" list, and then click [Remove].
(6) When the [Print Server Properties] screen appears, click [Yes].
(7) Click [Close] after driver removal is complete to exit the [Print Server Properties] dialog box.
(8) Turn off the printer and restart your computer.
Copyright (C) 2012 Oki Data Corporation 30 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
5.2 OPOS driver and other software
Use the following procedure to remove software.
The following uses the OPOS driver as an example. The procedure for removing the other software is the same.
* If the [User Account Control] dialog box is displayed, click [Yes] or [Continue].
When you uninstall software, you must first close the software to be removed.
Open the [Uninstall a program] screen (*).
* See the [Uninstall a program] procedure in "3.1 How to use this manual" for instructions on how to open the screen in each OS.
Select " POS PRINTER OPOS
OCX" and then click [Uninstall] or
[Remove].
(*1)
When the confirmation message appears, click [Yes].
This starts the uninstallation.
Some files may not be deleted.
Delete these manually from the
"C:\OPOS\Okidata\PT" folder.(*
2)
Copyright (C) 2012 Oki Data Corporation 31 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
*1) The program names for the Utility and Status Monitor are as follows.
Utility : PT330-331 Utility
Status Monitor : PT330-331 StatusMonitor
PR-PortManager : PR-PortManager
AdminManager : AdminManager
*2) The folders to be deleted for the Utility and Status Monitor are as follows.
Utility : C:\Program Files\Okidata\PT330-331\Utility (*)
Status Monitor : C:\Program Files\Okidata\PT330-331\StatusMonitor (*)
PR-PortManager : C:\Program Files\Okidata\Prmanager
AdminManager : C:\Program Files\Okidata\AdminManager
* For 64-bit Windows, the path is "C:\Program Files(x86)\...".
Copyright (C) 2012 Oki Data Corporation 32 of 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
6 Revision History
Revision
1.0.0.1
2012/08/02
Revised content
Copyright (C) 2012 Oki Data Corporation 33 of 33
Oki contact details
OkicontactName. Oki Systems
(UK) Limited
OkicontactAddress.550 Dundee Road
Slough Trading Estate
Slough
Berkshire
SL1 4LE
Oki Systems (Iberica), S.A.U
C/Teide, 3
San Sebastian de los Reyes
28703, Madrid
Tel:+34 91 3431620
Fax: +34 91-3431624
Atención al cliente: 902 36 00 36
Website: www.oki.es
Tel:+44 (0) 1753 819819
Fax:+44 (0) 1753 819899 http://www.oki.co.uk
Oki Systems Ireland Limited
The Square Industrial Complex
Tallaght
Dublin 24
Oki Systèmes (France) S.A.
44-50 Av. du Général de Gaulle
94246 L'Hay les Roses
Paris
Tel:+33 01 46 15 80 00
Télécopie:+33 01 46 15 80 60
Website: www.oki.fr
Tel:+353 (0) 1 4049590
Fax:+353 (0)1 4049591 http://www.oki.ie
Oki Systems Ireland Limited -
Northern Ireland
19 Ferndale Avenue
Glengormley
BT36 5AL
Northern Ireland
OKI Systems (Magyarország) Kft.
Capital Square
Tower 2
7th Floor
H-1133 Budapest,
Váci út 76
Hungary
Tel:+44 (0) 7767 271447
Fax:+44 (0) 1 404 9520 http://www.oki.ie
Telefon: +36 1 814 8000
Telefax: +36 1 814 8009
Website: www.okihu.hu
Technical Support for all Ireland:
Tel:+353 1 4049570
Fax:+353 1 4049555
E-mail: [email protected]
OKI Systems (Czech and Slovak), s.r.o.
IBC – Pobřežní 3
186 00 Praha 8
Czech Republic
Tel: 01805/6544357**
01805/OKIHELP**
Fax: +49 (0) 211 59 33 45
Website: www.okiprintingsolutions.de
**0,14€/Minute aus dem dt. Festnetz der T-Com (Stand 11.2008)
OKI Systems (Italia) S.p.A.
via Milano, 11,
20084 Lacchiarella (MI)
Tel:+39 (0) 2 900261
Fax:+39 (0) 2 90026344
Website: www.oki.it
OKI Printing Solutions
Platinium Business Park II, 3rd Floor ul. Domaniewska 42
02-672 Warsaw
Poland
Tel: +420 224 890158
Fax:+420 22 232 6621
Website: www.oki.cz, www.oki.sk
Oki Systems (Deutschland) GmbH
Hansaallee 187
40549 Düsseldorf
Tel:+48 22 448 65 00
Fax:+48 22 448 65 01
Website: www.oki.com.pl
E-mail: [email protected]
Hotline: 0800 120066
E-mail: [email protected]
Oki Systems (Ibérica) S.A.
Sucursal Portugal
Edifício Prime -
Av. Quinta Grande 53
7º C Alfragide
2614-521 Amadora
Portugal
Διανομέας των συστημάτων OKI
CPI S.A1 Rafailidou str.
177 78 Tavros
Athens
Greece
Tel:+351 21 470 4200
Fax:+351 21 470 4201
Website:www.oki.pt
E-mail : [email protected]
Tel: +30 210 48 05 800
Fax:+30 210 48 05 801
EMail:[email protected]
Oki Service
Serviço de apoio técnico ao
Cliente
Tel: 808 200 197
E-mail : [email protected]
OKI Europe Ltd. (Russia)
Office 702, Bldg 1
Zagorodnoye shosse
117152, Moscow
Tel: +74 095 258 6065
Fax: +74 095 258 6070 e-mail: [email protected]
Website: www.oki.ru
Technical support:
Tel: +7 495 564 8421 e-mail: [email protected]
Oki Systems (Österreich)
Campus 21
Businesszentrum Wien Sued
Liebermannstrasse A02 603
22345 Brun am Gebirge
Tel: +43 223 6677 110
Drucker Support:
+43 (0) 2236 677110-501
Fax Support:
+43 (0) 2236 677110-502
Website: www.oki.at
OKI Europe Ltd. (Ukraine)
Raisy Opkinoy Street,8
Building B, 2nd Floor,
Kiev 02002
Ukraine
Tel: +380 44 537 5288 e-mail: [email protected]
Website: www.oki.ua
OKI Sistem ve Yazıcı Çözümleri
Tic. Ltd. Şti.
Harman sok Duran Is Merkezi,
No:4, Kat:6,
34394, Levent
İstanbul
Tel: +90 212 279 2393
Faks: +90 212 279 2366
Web: www.oki.com.tr
www.okiprintingsolutions.com.tr
Oki Systems (Belgium)
Medialaan 24
1800 Vilvoorde
Helpdesk: 02-2574620
Fax: 02 2531848
Website: www.oki.be
AlphaLink Bulgaria Ltd.
2 Kukush Str.
Building "Antim Tower", fl. 6
1463 Sofia, Bulgaria tel: +359 2 821 1160 fax: +359 2 821 1193
Website: http://bulgaria.oki.com
OKI Printing Solutions
Herstedøstervej 27
2620 Albertslund
Danmark
Adm.: +45 43 66 65 00
Hotline: +45 43 66 65 40
Salg: +45 43 66 65 30
Fax: +45 43 66 65 90
Website: www.oki.dk
Oki Systems (Finland) Oy
Polaris Capella
Vänrikinkuja 3
02600 Espoo
Tel: +358 (0) 207 900 800
Fax: +358 (0) 207 900 809
Website: www.oki.fi
Oki Systems (Holland) b.v.
Neptunustraat 27-29
2132 JA Hoofddorp
Helpdesk: 0800 5667654
Tel:+31 (0) 23 55 63 740
Fax:+31 (0) 23 55 63 750
Website: www.oki.nl
Oki Systems (Norway) AS
Tevlingveien 23
N-1081 Oslo
Tel:+47 (0) 63 89 36 00
Telefax:+47 (0) 63 89 36 01
Ordrefax:+47 (0) 63 89 36 02
Website: www.oki.no
General Systems S.R.L.
(Romania)
Sos. Bucuresti-Ploiesti Nr. 135.
Bucharest 1
Romania
Tel: +40 21 303 3138
Fax: +40 21303 3150
Website: http://romania.oki.com
Var vänlig kontakta din Återförsäljare i första hand, för konsultation. I andra hand kontakta
Oki Systems (Sweden) AB
Borgafjordsgatan 7
Box 1191
164 26 Kista
Tel. +46 (0) 8 634 37 00 e-mail: [email protected] för allmänna frågor om
Oki produkter [email protected] för teknisk support gällandes Oki produkter
Vardagar: 08.30 - 12.00,
13.00 - 16.00
Website: www.oki.se
Oki Systems (Schweiz)
Baslerstrasse 15
CH-4310 Rheinfelden
Support deutsch +41 61 827 94 81
Support français +41 61 827 94 82
Support italiano +41 061 827 9473
Tel: +41 61 827 9494
Website: www.oki.ch
Oki Systems (Thailand) Ltd.
1168/81-82 Lumpini Tower,
27th Floor Rama IV Road
Tungmahamek, Sathorn
Bangkok 10120
Tel:(662) 679 9235
Fax:(662) 679 9243/245 http://www.okisysthai.com
Oki Data Americas Inc.(United
States)
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054
USA
Oki Systems (Hong Kong) Ltd.
Suite 1908, 19/F, Tower 3,
China Hong Kong City
33 Canton Road, TsimShaTsui,
Kowloon, Hong Kong
Tel: 1-800-654-3282
Fax: 1-856-222-5247 http://WWW.OKIPRINTINGSOLUTIONS.COM http://my.okidata.com
Oki Data Americas Inc.(América
Latina (OTRO))
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054
USA
Tel: (852) 3543 9288
Fax: (852) 3549 6040 http:// www.okiprintingsolutions.com.hk
Oki Data Americas Inc.(Canada •
Canadá)
4140 B Sladeview Crescent Units 7&8
Mississauga, Ontario
Canada L5L 6A1
Oki Data(Australia) Pty Ltd.
Tél: 1-905-608-5000
Téléc: 1-905-608-5040 http://WWW.OKIPRINTINGSOLUTIONS.COM
Levwl1 67 Epping Road, Macquarie Park
NSW 2113, Australia
Tel: +61 2 8071 0000
(Support Tel: 1800 807 472)
Fax: +61 2 8071 0010 http://www.oki.com.au
Comworth Systems Ltd.
8 Antares Place Mairangi Bay,
Auckland, New Zealand
Tel:(64) 9 477 0500
Fax:(64) 9 477 0549 http://www.comworth.co.nz
Tel (Español): 1-856-222-7496
1-856-222-5276
Fax: 1-856-222-5260
Email: [email protected]
Oki Data de Mexico, S.A. de C.V.
Mariano Escobedo #748, Piso 8
Col. Nueva Anzures
C.P. 11590, México, D.F.
Oki Data(S) P Ltd. Malaysia Rep
Office
Suite 21.03, 21st Floor Menara IGB,
Mid Valley City,
Lingkaran Syed Pura 59200,
Kuala Lumpur, Malaysia
Tel: (60) 3 2287 1177
Fax: (60) 3 2287 1166
Tel: 52-555-263-8780
Fax: 52-555-250-3501 http://
WWW.OKIPRINTINGSOLUTIONS.COM
Oki Data do Brasil, Ltda.
Rua Avenida Alfrefo Egidio de souza Aranha
100-4° andar-Bloco C Chacara Santo Antonio
Sao Paulo, Brazil 04726-170
Tel: 55-11-3444-6747 (Grande São
Paulo)
0800-11-5577 (Demais localidades)
Fax: 5511-3444-3501 e-mail: [email protected]
http://WWW.OKIPRINTINGSOLUTIONS.COM
Oki Data (Singapore) Pte. Ltd.
438A Alexandra Road #02-11/12,
Lobby 3, Alexandra Technopark
Singapore(119967)
Tel:(65) 6221 3722
Fax:(65) 6594 0609 http://www.okidata.com.sg
Oki Data Corporation
4-11-22 Shibaura, Minato-ku,Tokyo
108-8551, Japan www.okiprintingsolutions.com
Download
Advertisement
Key features
Compact size and easy-to-use design
Sharp, professional-looking prints with a resolution of up to 1200 x 1200 dpi
Variety of printing options, including borderless printing and duplex printing
Compatible with a range of media types, including photo paper, transparencies, and envelopes
Fast print speeds and low running costs
Frequently asked questions
The PT330 has a resolution of up to 1200 x 1200 dpi.
The PT330 can print on a variety of media types, including photo paper, transparencies, and envelopes.
The PT330 has fast print speeds.
The PT330 has low running costs.