advertisement
Operating instructions
Radio / CD
Casablanca CD50
2
Open here
Ouvrir s.v.p.
Por favor, abrir
Favor abrir
1
2
3
4
5
6
7 8 9
16 15 14 13 12
11 10
3
OPERATING ELEMENTS
1
button to unlock release panel
2
Volume control
3
ON button, switches the unit on/off, mute
4
RDS button, switches the RDS function on/off
Selects display for variable text
5
FM button, selects the FM waveband and the FM memory bank
TS, starts the TravelStore function
6
Display
7
button, displays the time
DIS, changes display contents
8
MENU button, accesses the menu for basic settings
9
button, opens the flip release panel
:
Cursor button block
;
OK button, confirms menu selections and starts the SCAN function
<
DEQ button, adjusts the equalizer
=
AUD button, adjusts bass, treble, balance and fader
LD, switches the Loudness function on/off
>
1 to 6 station buttons
?
AM button, selects the AM waveband
@
CD•C button, switches sound source between radio, CD player and CD changer (if connected)
4
Important information .............. 6
Traffic safety .................................... 6
Installation ....................................... 6
Accessories .................................... 6
Guarantee ....................................... 6
International telephone information ... 6
Removable front panel ............. 7
Switching the car audio system on/off ........................... 8
Volume control ......................... 9
Adjusting the power-on volume ........ 9
Mute ............................................... 9
Telephone audio/Navigation audio .... 9
Speed-dependent volume adjustment .................................... 10
Adjusting the volume of the beep ... 10
Radio operation ...................... 11
Switching to the radio mode .......... 11
RDS function ................................. 11
Selecting the waveband/memory bank .............................................. 11
Tuning into radio stations ............... 11
Adjusting seek tuning sensitivity ..... 11
Storing radio stations ..................... 12
Storing radio stations automatically
(TravelStore) .................................. 12
Recalling stored radio stations ....... 12
Scanning the radio stations within reception range (SCAN) ................ 12
Adjusting the scan time ................. 13
Optimising radio reception ............. 13
Selecting the display of variable text ................................................ 13
Adjusting the tuner ........................ 14
CD player operation ............... 14
Starting CD player operation ......... 14
Selecting tracks ............................ 15
CONTENTS
Audible fast forward/reverse
(CUE/REVIEW) ............................. 15
Playing tracks in random order
(MIX) ............................................. 15
Scanning tracks (SCAN) ............... 15
Repeating individual tracks
(REPEAT) ...................................... 15
Interrupting playback (PAUSE) ...... 15
Switching the display mode ........... 16
Naming CDs ................................. 16
Removing the CD .......................... 16
CD changer operation ............ 17
Starting CD changer operation ...... 17
Selecting CDs ............................... 17
Selecting tracks ............................ 17
Audible fast forward/reverse
(CUE/REVIEW) ............................. 17
Switching the display mode ........... 17
Repeating individual tracks or entire CDs (REPEAT) .................... 17
Playing tracks in random order
(MIX) ............................................. 17
Scanning all of the tracks on all of the CDs (SCAN) ....................... 18
Interrupting playback (PAUSE) ...... 18
Naming CDs ................................. 18
Clock ...................................... 19
Adjusting the tone and balance/fader ........................ 21
Switching Loudness on/off .... 21
Equalizer ................................ 22
External audio sources .......... 25
Specifications ........................ 25
Installation instructions .......... 96
5
IMPORTANT INFORMATION
Important information
Before you use your car audio system for the first time, please take the time to read the instruction manual carefully and make yourself familiar with the audio equipment. Keep this manual handy in your car for future reference.
Traffic safety
Traffic safety is always the top priority. Do not attempt to operate your car audio system unless the traffic conditions permit. Familiarize yourself with the equipment before you start driving.
Always make sure that you are still able to hear any warning signals coming from outside the vehicle, such as police or fire engine sirens, at all times.
As a result, please always select a moderate volume for playing your car audio system while you are driving.
Installation
If you would like to install your new car stereo yourself or add other audio components to the existing ones, then please read the instructions on installation and connection at the end of this manual carefully.
Accessories
Use only Blaupunkt-approved accessories.
Remote control unit
The optionally available RC 08 infrared remote control unit allows you to conveniently operate the most important system functions from the steering wheel.
Amplifiers
All Blaupunkt amplifiers can be used.
CD changers
The following CD changers can be connected directly: CDC A 06, CDC A 08,
CDC A 072 and IDC A 09.
The CDC A 05 and CDC A 071 can be connected with an adapter cable (Blaupunkt no. 7 607 889 093).
Guarantee
The scope of the guarantee is determined by the laws in the country where the unit is purchased.
Regardless of the legal guarantee regulations, Blaupunkt affords a 12-month guarantee.
If you have any questions about the guarantee, please contact your authorised Blaupunkt dealer. Your cash register receipt is a valid guarantee coupon.
International telephone information
Have you got any questions on the operation of this equipment or do you require more information?
Give us a call!
You will find the international telephone and fax numbers on the last page of this manual.
6
Removable front panel
Theft protection system
To prevent your car audio system from being stolen, it has been equipped with a removable front panel (flip release panel). Without the front panel, the car audio system is useless to thieves.
Protect your car audio system against theft and take the operating panel with you each time you leave the vehicle.
Never leave the release panel in the car, even if it is well hidden. The panel has been designed so that it is easy to remove.
Notes:
●
Do not drop the release panel.
●
●
Do not expose the release panel to direct sunlight or other heat sources.
Store the release panel in the case supplied.
Removing the operating panel
➮
Press
1
.
The release panel will unlock.
1
REMOVABLE FRONT PANEL
●
●
●
When you remove the operating panel, the car audio system will automatically switch off.
All of the settings will remain stored.
A CD inserted into the car audio system will remain in place.
Replacing the operating panel
➮
Slide the operating panel into the guides from left to right.
➮
Press the left-hand side of the panel onto the car audio system until it locks into place.
Note:
●
While replacing the panel, be careful not to press on the display.
If the car audio system was on when you removed the panel, it will automatically switch back on using the same settings when you replace it (radio, CD player or CD changer).
➮
First pull the operating panel forward and then slide it to the left to remove it.
7
SCHWITCHING ON/OFF
Switching the car audio system on/off
The car audio system can be switched on/off in a number of ways.
Switching the car audio system on/ off with the ignition
If the car audio system has been connected to your vehicle ignition, it is possible to switch it on and off with the ignition.
You can also switch the car audio system on when the ignition is switched off.
➮
Press down and hold
3
until the car audio system switches on.
Note:
To prevent the car battery from running down, the radio will switch off again automatically after one hour.
Switching the car audio system on/ off with the removable front panel
➮
Remove the release panel.
The car audio system will switch off.
➮
Replace the release panel.
The car audio system will switch on again. The last settings used (radio, CD player or CD changer) will be activated.
Switching the car audio system on/ off by pressing
3
➮
Press
3
to switch the car audio system on.
➮
Press
3
for longer than 2 seconds to switch the car audio system off again.
The system will then switch off.
Switching the car audio system on by inserting a CD
If the system is switched off and there is no CD in the CD player,
➮ press
9
.
The flip release panel will open.
➮
Insert the CD into the CD player with the label facing up until you feel slight resistance. Do not use force.
The CD will be pulled automatically into the CD player.
Do not attempt to assist or prevent this process.
➮
Press the operating panel closed gently until you feel it click into place.
The audio system will switch on. CD playback will begin.
8
Volume control
The car audio system volume can be adjusted to levels from 0 (off) to 66 (maximum).
➮
To increase the volume, turn the volume control knob
2
to the right.
➮
To decrease the volume, turn the volume control knob
2
to the left.
Adjusting the power-on volume
It is possible to adjust the volume at which the car audio system switches on.
➮
Press MENU
8
.
➮
Press
:
repeatedly until “ON
VOLUME” appears in the display.
➮
Press
:
to adjust the volume.
If you adjust this setting to “0”, the car audio system will switch on at the volume used before it was switched off.
Warning of serious injury
If the power-on volume is set to the maximum level, it may be extremely loud when the car audio system is switched on.
If the power-on volume is set to 0 and the car audio system was played at maximum volume before it was switched off, it may be extremely loud when the car audio system is switched back on. This could result in serious injury to your ears!
➮
Once you have selected the desired settings, press MENU
8
or
OK
;
.
VOLUME CONTROL
Mute
You can reduce the volume of the car audio system immediately (mute).
➮
Press
3
briefly.
“MUTE” will appear in the display.
Selecting the mute level
It is possible to select the mute level.
➮
Press MENU
8
.
➮
Press
:
repeatedly until “MUTE
LEVEL” appears in the display.
➮
Press
:
to select the mute level.
➮
Once you have made your selection, press MENU
8
or OK
;
.
Telephone audio/Navigation audio
If your car audio system is equipped with a mobile telephone or a navigation system, it will automatically switch to mute when you use the phone or when voice output from the navigation system is emitted. The car speakers will then be used for the phone call or the voice output. This will not work unless the mobile phone or the navigation system is connected to the car audio system as described in the installation instructions.
To find out which navigation systems can be used with your car radio, contact a Blaupunkt specialist dealer.
The volume at which phone calls or navigation voice output are heard can be adjusted.
➮
Press MENU
8
.
➮
Press
:
repeatedly until “TEL/
NAVI VOL” appears in the display.
9
VOLUME CONTROL
➮
Press
:
to select the desired volume level.
➮
Once you have made your selection, press MENU
8
or OK
;
.
Speed-dependent volume adjustment
This function automatically adjusts the volume to your driving speed. For this to function properly, your car radio must be connected as described in the installation instructions.
The automatic volume adjustment can be set to six levels (0 to 5).
➮
Press MENU
8
.
➮
Press
:
repeatedly until “AUTO
SOUND” appears in the display.
➮
Press
:
to select the desired volume adjustment.
➮
Once you have made your selection, press MENU
8
or OK
;
.
Note:
The best setting for the speed-dependent volume adjustment depends on how much driving noise you experience in your vehicle. Use a process of trial and error to find the best setting for your vehicle.
Adjusting the volume of the beep
For a number of functions you will hear a beep if you press a key for longer than
2 seconds, e.g. if you want to store a radio station on a station preset. You can adjust the volume level of this beep.
➮
Press MENU
8
.
➮
Press
:
repeatedly until
“BEEP” appears in the display.
➮
Press
:
to adjust the volume.
“0” means the beep volume is off,
“9” means the beep volume is adjusted to the maximum volume.
➮
Once you have adjusted the settings, press MENU
8
or OK
;
.
10
Radio operation
Switching to the radio mode
If you are currently using the CD player or CD changer,
➮ press CD•C
@
repeatedly until
“RADIO” appears in the display.
RDS function
This car audio system has been equipped with an RDS radio receiver.
Many FM radio stations now transmit a signal which contains such other information as the station name along with their regular programming. As soon as the radio station name is detected, it will appear in the display. The RDS function can be switched on or off.
Switching the RDS function on/off
➮
To take advantage of the RDS function, press RDS
4
.
When the RDS function has been activated, the RDS symbol will light up in the display.
Selecting the waveband/ memory bank
The car audio system is able to receive
FM and AM radio programs. There are three memory banks for the FM waveband and one memory bank for the AM waveband.
Up to six radio stations can be stored on each of the memory banks.
➮
To switch between the FM memory banks, press FM / TS
5
.
➮
To select the AM waveband, press
AM
?
.
RADIO OPERATION
Tuning into radio stations
You can tune into radio stations in a number of different ways.
Automatic seek tuning
➮
Press or
:
.
The radio will tune into the next available station within reception range.
Manual station selection
You can also tune into radio stations manually.
➮
Press or
:
.
Note:
You cannot use manual tuning unless the RDS function is deactivated.
Paging through the broadcasting network (for FM only)
If a radio broadcasting network has more than one station, you can page through the “station network”.
➮
Press or
:
to tune into the next station in the network.
Note:
To take advantage of this function, you must have activated the RDS function.
It is only possible to tune into those stations which have been received once before already. To do this, use the SCAN or TravelStore function.
Adjusting seek tuning sensitivity
It is possible to adjust the sensitivity of the seek tuning function to tune the radio into stations with strong reception signals only, or to those with weaker reception signals as well.
11
RADIO OPERATION
➮
Press MENU
8
.
➮
Press
:
repeatedly until
“SENS” appears in the display.
➮
Press
:
.
The currently selected setting will appear in the display. “SENS HI” indicates the highest level of sensitivity, “SENS
LO” the lowest. If you select “SENS LO”,
“lo” will light up in the display.
➮
Press
:
to select the desired sensitivity.
➮
Once you have made your selection, press MENU
8
or OK
;
.
Storing radio stations
Storing radio stations manually
➮
Select the desired FM memory bank FM1, FM2, FMT or the AM waveband.
➮
Tune the radio into the desired station.
➮
Press and hold down one of the station preset buttons 1 to 6
>
on which you want to store the radio station for longer than two seconds.
Storing radio stations automatically (TravelStore)
You can automatically store the six radio stations with the strongest reception in your current reception area (for FM only). These stations will be stored in the FMT memory bank.
Note:
Any stations stored previously in the memory bank will be deleted.
➮
Press and hold down FM / TS
5 for longer than two seconds.
The storing process will begin.
“TRAVEL-STORE” will appear in the display. After the stations have been stored, the radio will automatically begin to play the station stored on preset button 1 for the FMT memory bank.
Recalling stored radio stations
➮
Select the desired station memory bank.
➮
Press the station button 1 to 6
> on which you have stored the desired radio station.
Scanning the radio stations within reception range (SCAN)
You can scan all of the radio stations currently within your reception range.
The scan time can be set in the menu to play from five to 30 seconds.
Starting SCAN
➮
Press and hold down OK
;
for longer than two seconds.
SCAN will begin. “SCAN” will appear briefly in the display, followed by the flashing station name or frequency of the radio station currently being scanned.
Stopping the SCAN function, continuing to listen to the radio station scanned
➮
Press OK
;
.
SCAN will end and the last station scanned will continue playing.
12
Adjusting the scan time
➮
Press MENU
8
.
➮
Press
:
repeatedly until
“SCANTIME” appears in the display.
➮
Press
:
to set the scan time as desired.
➮
Once you have made your selection, press MENU
8
or OK
;
.
Note:
The scan time selected also applies to the SCAN function for theCD player and the CD changer operation.
Optimising radio reception
Interference-related treble cut
(HICUT)
The HICUT function improves reception when reception begins to deteriorate. If interference occurs, then the treble and the noise is cut automatically.
Switching HICUT on/off
➮
Press MENU
8
.
➮
Press
:
repeatedly until “HI-
CUT” appears in the display.
➮
Press or
:
to switch HICUT on or off.
“HICUT 0” indicates that the function is switched off; when “HICUT 3” appears, the treble will be automatically cut as far as possible.
➮
Press MENU
8
or OK
;
.
RADIO OPERATION
Interference-dependent bandwidth switching (SHARX)
The SHARX function allows you to virtually eliminate interference from neighbouring radio stations. When you are in a reception area with a large number of radio station signals, switch the SHARX function on.
Switching SHARX on/off
➮
Press MENU
8
.
➮
Press
:
repeatedly until
“SHARX” appears in the display.
➮
Press or
:
to switch SHARX on or off.
“SHARX OFF” means no bandwidth switching, “SHARX ON” means automatic bandwidth switching.
➮
Press MENU
8
or OK
;
.
Selecting the display of variable text
A number of radio stations use the RDS signal to transmit advertising or other texts in place of their station names.
These “variable texts” will appear in the display. It is possible to adjust your radio so that these “variable texts” do not appear.
➮
Press and hold down RDS
4
until
“NAME FIX” appears in the display.
➮
To have the “variable texts” displayed again, press and hold down
RDS
4
until “NAME VAR” appears in the display.
13
RADIO OPERATION
Adjusting the tuner
This car audio system has been equipped with a multiband tuner. The tuner can be adjusted to accommodate country-specific requirements. The available regions are: America, Europe,
Asia and Thailand. The tuner is not fully functional unless it has been set to the country in which it is used.
Adjusting the tuner
➮
Press MENU
8
.
➮
Press
:
repeatedly until “FM
TUNER” appears in the display.
➮
Press
:
to select the country.
➮
Once you have completed the setting, press MENU
8
or OK
;
.
CD PLAYER OPERATION
CD player operation
The CD player in this car audio system can be used to play conventional music CDs with a diameter of 12 cm.
Danger of damage to the CD player!
CD singles with a diameter of 8 cm and contour CDs (shape CDs) are not suitable for use with this CD player.
We assume no liability for any damage done to the CD player resulting from the use of unsuitable CDs.
Starting CD player operation
●
If there is no CD in the player,
➮ press
9
.
The flip release panel will open.
➮
Insert a CD into the player with the label facing up until you feel slight resistance. Do not use force.
The CD will be pulled into the player automatically.
Do not attempt to assist or prevent this process.
➮
Press the operating panel closed gently until you feel it click into place.
The audio system will switch on. CD playback will begin.
●
If there already is a CD inserted into the player,
➮ press CD•C
@
repeatedly until
“CD” appears in the display.
Playback will resume at the point where it was interrupted.
14
Selecting tracks
➮
Press a key on the cursor block
: to select the next or the previous track.
Press or
:
once to restart the same track.
Audible fast forward/reverse
(CUE/REVIEW)
To start Cue or Review,
➮ press and hold down either or
:
until the process begins.
Playing tracks in random order
(MIX)
➮
Press 5 MIX
>
.
“MIX CD” will appear briefly in the display, the MIX symbol will light up in the display. The next track played will be selected at random.
Stopping the MIX function
➮
Press 5 MIX
>
again.
“MIX OFF” will appear briefly in the display and the MIX symbol will no longer light up.
Scanning tracks (SCAN)
You can scan all of the tracks on the
CD.
➮
Press OK
;
for longer than two seconds. Scanning will begin with the next track.
Note:
It is possible to adjust the scan time. For more information, read the section on
“Adjusting the scan time” in the chapter on “Radio Operation”.
CD PLAYER OPERATION
Stopping the SCAN function, continue listening to the current track
➮
To stop the SCAN function, press
OK
;
.
The track currently scanned will continue playing.
Repeating individual tracks
(REPEAT)
➮
To repeat the track currently playing, press 4 RPT
>
.
“REPEAT TRCK” will appear in the display, the RPT symbol will light up. The track will continue to repeat until RPT is deactivated.
Stopping the REPEAT function
➮
If you want to stop the REPEAT function, press 4 RPT
>
again.
“REPEAT OFF” will appear briefly in the display, the RPT symbol will no longer light up. CD playback will resume normally.
Interrupting playback (PAUSE)
➮
Press 3
>
.
“PAUSE” will appear in the display.
Stopping PAUSE
➮
Press 3
>
during the pause.
Playback will resume.
15
CD PLAYER OPERATION
Switching the display mode
➮
To switch the display between the track number and time or the track number and elapsed playing time or track number and CD name, press / DIS
7
for longer than two seconds once or repeatedly until the desired display becomes visible.
Naming CDs
To help you to identify your CDs more easily, the car audio system allows you to individually name up to 30 CDs. The name can be made up of up to eight letters. If you attempt to enter more than
30 names, “FULL” will appear in the display.
Entering/editing CD names
➮
You are listening to the CD you want to name.
➮
Press MENU
8
.
➮
Press
:
to select
“CD NAME”.
➮
Press or
:
twice.
The car audio system is now in the edit mode. If the CD you selected does not yet have a name, eight dashes will appear in the display.
➮
The first input position will flash.
➮
Press
:
to select the letter you want to enter. If you want to leave this position blank, select the dash.
➮
Press or
:
to move the cursor to a different input position.
➮
Press MENU
8
or OK
;
to store the name.
Deleting a CD name
➮
You are listening to a CD and would like to delete its name.
➮
Press MENU
8
.
➮
Press
:
to select
“CD NAME”.
➮
Press or
:
.
➮
Press and hold down MENU
8
.
After four seconds you will hear a beep and “DELETE NAME” will appear in the display.
➮
Release MENU
8
.
The CD name will be deleted.
➮
Press OK
;
to return to the menu.
Removing the CD
➮
Press
9
to activate the eject function.
The flip release panel will fold down, the
CD will eject.
➮
Remove the CD and close the operating panel.
16
CD changer operation
Note:
For information on how to handle CDs, how to insert CDs into the changer and how to operate the changer, please refer to the instructions included with the
CD changer.
Starting CD changer operation
➮
Press CD•C
@
repeatedly until
“CHANGER” appears in the display.
Playback will begin with the first CD the changer detects in the magazine.
Selecting CDs
➮
To select a CD up or down in the magazine, press or
:
the required number of times.
Selecting tracks
➮
To select a different track on the
CD currently playing, press or
:
the required number of times.
Audible fast forward/reverse
(CUE/REVIEW)
To start Cue or Review,
➮ press and hold down either or
:
until the process begins.
Switching the display mode
➮
To switch the display between the track number and elapsed playing time or the track number and time, or track number and CD number or track number and CD name, press
/ DIS
7
for longer than two seconds once or repeatedly as re-
CD CHANGER OPERATION
quired, until the desired information appears in the display.
Repeating individual tracks or entire CDs (REPEAT)
➮
To repeat the track currently playing, press 4 RPT
>
briefly.
“REPEAT TRCK” will appear briefly in the display, RPT will light up in the display.
➮
To repeat the entire CD currently playing, press 4 RPT
>
again.
“REPEAT DISC” will appear briefly in the display, RPT will light up in the display.
Stopping the REPEAT function
➮
To stop the REPEAT function for the current track or CD, press
4 RPT
>
repeatedly until
“REPEAT OFF” appears in the display and RPT no longer lights up.
Playing tracks in random order
(MIX)
➮
To play the tracks of the currently selected CD in random order, press 5 MIX
>
briefly.
“MIX CD” will appear briefly in the display, MIX will light up in the display.
➮
To play the tracks of all of the CDs in random order, press 5 MIX
> again.
“MIX ALL” will appear briefly in the display, MIX will light up in the display.
Note:
The CDC A 08 and the IDC A 09 are also able to play all of the CDs in the changer in random order. The other CD
17
CD CHANGER OPERATION
changers first play all of the tracks on a
CD in random order and then select the next CD in the changer.
Stopping the MIX function
➮
To stop the MIX function, press
5 MIX
>
repeatedly until “MIX
OFF” appears briefly in the display and MIX no longer lights up.
Scanning all of the tracks on all of the CDs (SCAN)
➮
To scan all of the tracks on all of the CDs in ascending order, press
OK
;
for longer than two seconds.
“SCAN” will appear in the display.
Stopping the SCAN function
➮
To stop the SCAN function, press
OK
;
briefly.
The track currently scanned will continue playing.
Note:
It is possible to adjust the scan time. For more information, read the section on
“Adjusting the scan time” in the chapter on “Radio Operation”.
Interrupting playback (PAUSE)
➮
Press 3
>
.
“PAUSE” will appear in the display.
Stopping PAUSE
➮
Press 3
>
during the pause.
Playback will resume.
Naming CDs
To help you to identify your CDs more easily, the car audio system allows you to individually name up to 99 CDs. The name can be made up of up to seven letters.
If you attempt to enter more than 99 names, “FULL” will appear in the display.
Entering/editing CD names
➮
Press MENU
8
.
➮
Press
:
to select “CDC
NAME”.
➮
Press or
:
.
The car audio system is now in selection mode.
➮
Press
:
to select the CD you would like to name.
➮
Press or
:
.
Now you are in the edit mode. If the CD you selected does not yet have a name, seven dashes will appear in the display.
➮
The first input position will flash.
➮
Press
:
to select the letter you want to enter. If you want to leave this position blank, select the dash.
➮
Press or
:
to move the cursor to a different input position.
➮
Press MENU
8
or OK
;
to store the name.
Deleting a CD name
➮
You are listening to a CD and would like to delete its name.
➮
Press MENU
8
.
18
CD CHANGER OPERATION
➮
Press
:
to select “CDC
NAME”.
➮
Press or
:
.
➮
Press and hold down MENU
8
.
After four seconds you will hear a beep and “DELETE NAME” will appear in the display.
➮
Release MENU
8
.
The CD name will be deleted.
➮
Press OK
;
to return to the menu.
Deleting all of the CD names
You want to delete all of the names entered for the CDs.
➮
You are listening to a CD.
➮
Press MENU
8
.
➮
Press
:
to select “CDC
NAME”.
➮
Press or
:
.
➮
Press and hold down MENU
8
.
After four seconds you will hear a beep and “DELETE NAME” will appear in the display. Continue to hold down MENU
8
until you hear a second beep and “DELETE ALL” appears in the display.
➮
Release MENU
8
.
All of the CD names stored will be deleted.
➮
Press OK
;
to return to the menu.
CLOCK
CLOCK
Displaying the clock briefly
➮
To display the time briefly, press
/ DIS
7
briefly.
Setting the time
The time can be set automatically by the RDS signal. If you are unable to receive an RDS radio station or if the RDS station you are listening to does not support this function, you can also set the time manually.
Setting the time automatically
➮
To set the time automatically, press
MENU
8
.
➮
Press
:
until “CLOCK MAN”
(manual) or “CLOCK AUTO” (automatic) appears in the display.
➮
Press
:
until “CLOCK AUTO” appears in the display.
➮
Once you have made your selection, press MENU
8
or OK
; twice.
When you tune into a radio station with the RDS clock function (RDS-CT), the time will be set automatically.
Setting the time manually
➮
To set the time, press MENU
8
.
➮
Press
:
repeatedly until
“CLOCKSET” appears in the display.
➮
Press
:
.
The time will appear in the display. The minutes will flash and can be altered.
19
CLOCK
➮
Press
:
to alter the minutes.
➮
Once you have altered the minutes, press
:
. The hours will begin to flash.
➮
Press
:
to alter the hours.
➮
Press MENU
8
or OK
;
.
Selecting the 12/24-hour time display mode
➮
Press MENU
8
.
“MENU” will appear in the display.
➮
Press
:
repeatedly until “24 H
MODE” or “12 H MODE” appears in the display.
➮
Press or
:
to switch the display mode.
➮
Once you have selected the mode, press MENU
8
or OK
;
.
Activating the clock for display when the car audio system is switched off
➮
To activate the clock for display when the car audio system is switched off, press MENU
8
.
“MENU” will appear in the display.
➮
Press
:
repeatedly until “CLK
DISP OFF” or “CLK DISP ON” appears in the display.
➮
Press or
:
to switch the clock display on or off.
➮
Once you have made the setting, press MENU
8
or OK
;
.
Displaying the time briefly when the car radio is switched off
To display the time briefly when the car radio is switched off,
➮ press / DIS
7
.
The time will then appear in the display for eight seconds.
20
Adjusting the tone and balance/fader
Adjusting the bass
➮
To adjust the bass, press AUD / LD
=
.
“BASS” will appear in the display.
➮
Press or
:
to alter the bass.
Adjusting the treble
➮
To adjust the treble, press AUD /
LD
=
.
“BASS” will appear in the display.
➮
Press
:
until “TREBLE” appears in the display.
➮
Press or
:
to alter the treble.
Adjusting the balance
➮
To adjust the balance, press AUD /
LD
=
.
“BASS” will appear in the display.
➮
Press
:
until “BALANCE” appears in the display.
➮
Press or
:
to alter the balance.
Adjusting the fader
➮
To adjust the fader, press AUD / LD
=
.
“BASS” will appear in the display.
➮
Press
:
until “FADER” appears in the display.
➮
Press or
:
to alter the fader.
TONE AND BALANCE/FADER
Switching Loudness on/off
Loudness boosts the bass and treble when the volume is low to create a more natural sound.
➮
Press AUD / LD
=
for approx. two seconds.
LD will light up in the display to indicate that Loudness is active.
Adjusting Loudness intensity
The Loudness boost can be set in stages from one to six.
➮
Press MENU
8
.
“MENU” will appear in the display.
➮
Press
:
repeatedly until
“LOUDNESS” appears in the display.
➮
Press or
:
to alter the Loudness setting.
➮
Once you have completed adjusting the settings, press MENU
8
or
OK
;
.
21
EQUALIZER
Equalizer
This car audio system is equipped with a parametric digital equalizer. In this case, parametric means that it is possible to individually raise or lower one frequency (GAIN +10 to -20 dB) for each of the five filters.
The following filters are available:
●
●
SUB LOW EQ 32 to 50 Hz
LOW EQ 63 to 250 Hz
●
●
MID EQ 315 to 1250 Hz
MID/HIGH EQ 1600 to 6300 Hz
●
HIGH EQ 8000 to 12500 Hz
These filters can be adjusted without the use of measuring equipment. As a result, it is possible to significantly influence the in-vehicle acoustics.
Notes on making equalizer settings
We recommend that you use a CD you are familiar with to make the settings.
Before you set the equaliser, set bass, treble, balance and fader to “0” and deactivate the Loudness function. For more information on how to do this, refer to the section on “Tone and balance/ fader”.
➮
Now listen to the CD you have selected.
➮
Evaluate the sound according to your own personal preferences.
➮
Now refer to “Sound impression” in the following table.
➮
Make the settings for the equalizer as described under “What to do”.
Switching the equalizer on/off
➮
To switch the equalizer on, press and hold down DEQ
<
until EQ lights up in the display and “EQ
ON” appears briefly.
➮
To switch the equalizer off, press and hold down DEQ
<
until EQ no longer lights up in the display and “EQ OFF” appears briefly.
Adjusting the equalizer
➮
Press DEQ
<
.
➮
Press or
:
to select
“DIGITAL EQ”.
➮
Press or
:
to select the filter.
➮
Press or
:
.
➮
To select the frequency, press
:
.
➮
To adjust the level, press or
:
.
➮
To select the next filter, first press
OK
;
and then or
:
.
➮
Once you have completed making all of the necessary adjustments, press DEQ
<
.
22
Selecting a sound preset
You can also select sound presets for the following types of music:
●
●
CLASSIC
POP
●
●
●
●
JAZZ
ROCK
TECHNO
SPEECH
The settings for these types of music have already been defined.
➮
Press DEQ
<
.
➮
Press or
:
repeatedly until
“SOUND PRESET” appears in the display.
➮
Press or
:
to select the desired sound preset.
➮
Press DEQ
<
or OK
;
.
Selecting a car preset
To further improve the sound properties in your vehicle, you can also select your vehicle type.
●
●
COMPACT
LIMOUSINE
●
●
VAN
ROADSTER
●
MINI
TRUCK
●
The settings for these types of vehicles have already been defined.
EQUALIZER
➮
Press DEQ
<
.
➮
Press or
:
repeatedly until
“CAR PRESET” appears in the display.
➮
Press or
:
to select the desired car preset.
➮
Press DEQ
<
or OK
;
.
Adjusting the spectrometer
The spectrometer in the display uses symbols to temporarily indicate what adjustments are made to the volume, the tone and balance/fader and the equalizer settings.
If no adjustments are being made to the system, the spectrometer displays the output level of the car radio.
You can select the type of spectrometer you want displayed in the menu.
There are two different types available.
Selecting the spectrometer type
➮
Press MENU
8
.
“MENU” will appear in the display.
➮
Press
:
repeatedly until “EQ
DISPLAY” appears in the display.
➮
Press or
:
to select either
“SPECTRUM 1”, “SPECTRUM 2” or “EQ DISP OFF”.
➮
Once you have completed adjusting the settings, press MENU
8
or
OK
;
.
23
EQUALIZER
24
EXTERNAL AUDIO SOURCES
External audio sources
In addition to the CD changer it is also possible to connect another external audio source to the line output. These sources can include a portable CD player, MiniDisc player or MP3 player.
If you have not connected a CD changer, it is possible to connect two external audio sources.
You must activate the AUX output in the menu.
If you would like to connect another external audio source, you will require an adapter cable. This adapter cable can be ordered from any authorized Blaupunkt dealer.
Switching the AUX output on/off
➮
Press MENU
8
.
“MENU” will appear in the display.
➮
Press
:
repeatedly until “AUX-
IN-1 OFF” or “AUX-IN-1 ON” appears in the display.
In place of the “1”, there is a “2” for the second AUX input. If you have connected a CD changer, then only AUX “2” can be selected.
➮
Press or
:
to switch AUX on or off.
➮
Once you have completed your selections, press MENU
8
or
OK
;
.
Note:
If the AUX input has been switched ON, you can select it by pressing CD•C
@
.
Tuner
Wavebands:
FM:
AM:
SPECIFICATIONS
Specifications
Amplifier
Output power: 4 x 25 watts RMS acc. to DIN 45 324 at 14.4 V
4 x 40 watts max.
power
CD player
Signal-to-noise ratio:
96 dB
Preamp Out
4 channels:
87.5 - 107.9 MHz
530 - 1710 kHz
FM Mono sensitivity:
7.8 dBf
FM frequency response:
30 - 15000 Hz
Frequency response:
20 - 20000 Hz
4 V
Subject to technical modification!
25
Service numbers / Numéros du service après-vente /
Números de servicio / Número de serviço
Deutschland
Belgique / België
France
Nederland
Great Britain
Danmark
Sverige
Norge
Suomi
Österreich
EÏÏ¿˜
âeská republika
USA
Singapore
Slovensko
Tel.:
0 18 05 00 02 25
0 25 25 54 44
014 010 70 07
023 565 63 48
018 958 383 66
44 89 83 60
08 750 15 00
66 81 70 00
094 359 91
01-6 10 39-0
015 762 241
026 130 04 41
800-266 25 28
006 535 054 47
042 175 873 212
Fax:
0 51 21 49 40 02
0 25 25 54 48
014 010 73 20
023 565 63 31
018 958 383 94
44 89 86 44
08 750 18 10
66 81 71 57
094 359 92 36
01-6 10 39-391
015 769 473
026 130 05 14
708-681 71 88
006 535 053 12
042 175 873 229
03/00 TRO
Blaupunkt-Werke GmbH
Bosch Gruppe
K7/VKD 8 622 402 140
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement