AMX NMX-ENC-N2135 Encoder svsi n2000 series jpeg2000 /lan Data Sheet

DATA SHEET

JPEG 2000 1080p Low Latency Video over IP

Encoder with KVM, PoE, SFP, HDMI

NMX-ENC-N2135 (FGN2135-SA), Stand Alone

NMX-ENC-N2135-C (FGN2135-CD), Card

© 2015 AMX. All rights reserved.

Overview

The SVSI JPEG2000 NMX-ENC-N2135 and NMX-DEC-N2235 encoder and decoder solution provides users with the industry’s most versatile solution for distributing

AV over a converged network. JPEG2000 compression is the codec of choice for users demanding low-latency cinema grade HD quality video in their system. SVSI video over IP encoders are used to encode and distribute sources of almost any format onto an existing IP network making that stream available to any endpoint in the facility utilizing copper and/or fiber connectivity. SVSI Video over IP Decoders are used to decode Networked AV streams for display. With the ability to direct any source stream to any display, large, low-cost switching and distribution systems are simple to deploy without proprietary cabling or dedicated switching hardware.

User selectable bandwidth control (10Mbps-200Mbps) allows for precision tuning considering network load and video quality.

The NMX-ENC-N2135 and NMX-DEC-N2235 both feature keyboard and mouse extension over IP. Users can set security options for device control. Security can be turned off allowing any decoder to connect to any computer connected to an encoder – for example within a call center where security of this type is not an issue and access to all end points is necessary. Security can be set allowing access to only specified computers or defined groups of computers – sensitive environments such as command and control centers benefit from this kind of customized security.

The SVSI solution allows for any number of inputs to connect to any number of outputs creating a video matrix of unlimited size and expandability. Plug-n-play, auto-detect technology reduces installation and programming time and all SVSI encoders and decoders include built in control capability.

Features

• Design Flexibility – Compatible with all AMX SVSI N2000 series products so designers can choose the right product for each end point

• Input and Output Scaling – scaling performed in encoders or decoders for maximum flexibility with sources and displays

• Power Over Ethernet (POE) – eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high-density installations

• Infrared (IR) – Emitter connection allows control of IR-only display devices

• Fast Install – With Phoenix connectors for Power, IR, RS232 serial, and analog audio interfaces

• Balanced and Unbalanced Audio – Embedded 7.1 audio (balanced and unbalanced)

• Pass-through HDMI – allows easy installation with local display such as desktop PC applications

• Multiple Connection Options – RJ-45 and SFP network connectors and HDMI video connections

• KVM – Single USB-B and Dual USB-A control for KVM applications

• Control Flexibility – Built-in or third-party control

Specifications

VIDEO

Digital Video Input

Analog Video Input

Video Output

Formats

Progressive Input Resolutions

HDMI, DVI-D, Dual-Mode DisplayPort (DP++),

RGB/VGA

DVI-D and Dual-Mode DisplayPort (DP++) are supported through a passive adapter

HD-15 VGA, Component

Component is supported through a passive adapter

Network video over Ethernet via RJ45 port or fiber via

1G SFP port, HDMI, DVI-D

DVI-D is supported through a passive adapter

HDMI, DVI-D (through adapter), HDCP content protection support, RGBHV, YPbPr

Supports most common HD up to 1920x1200.

See website for all supported resolutions.

Interlaced Input Resolutions

Analog Input Resolutions

Note

Output Resolutions

Analog-To-Digital Conversion

Note

Supports 1080i60.

See website for all supported resolutions.

Supports most common HD up to 1920x1200.

See website for all supported resolutions.

Input resolutions supported @60Hz refresh rates are also supported @59.94Hz

Matched to inputs.

8-bit 165 MHz per each of three color channels

The N2135 Encoder does not accept Composite or S-

Video (YC)

AUDIO

Input Signal Types

Output Signal Types

HDMI Audio Formats

Analog Audio Format

Analog-To-Digital Conversion

Note

Embedded audio on HDMI (DVI-D through adapter) or

Analog Stereo (Balanced or Unbalanced)

Ethernet, Embedded audio on HDMI or DVI-D (through adapter)

HDMI output refers to pass-through video on the

HDMI OUT port

8ch PCM

Stereo 2-channel

16-bit 32 kHz, 44.1 kHz and 48 kHz

HDMI output refers to pass-through video on the

2

LATENCY

Latency

Note

COMMUNICATIONS

Ethernet

HDMI

PORTS

+12V 2A

P0

P1

IR

RS232

AUDIO

HDMI OUT

HDMI IN

VGA IN

USB connectors (front panel)

CONTROLS AND INDICATORS – FRONT PANEL

HDMI OUT port.

50 ms at 60 fps

• This is the combined encode plus decode latency.

Total latency from source to screen will also include any network latency.

•

Scaling adds one frame of latency (17ms at 60fps)

P0

10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP

P1

1 Gbps port which accepts compatible fiber transceivers or direct attach cables (fiber or copper cabling)

HDCP, EDID management

One 12 Volt DC power input

8-wire RJ45 female

10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port

Provides the network connection, network AV video, and power to the Encoders and Decoders

SFP port (SFP fiber transceiver or direct attach cable not included)

Provides the network connection and network AV video

2-pin terminal Phoenix connector

Provides Infrared (IR) output only (33-60 kHz; typically

39 kHz). Emitter may be necessary (not included)

3-pin terminal Phoenix connector

Provides a serial control interface. Full duplex communication. Available terminal speed settings:

9600-115200 baud rate

5-pin terminal Phoenix connector

Provides user-selectable balanced/unbalanced input.

Dedicated audio input

HDMI video output (passive pass-through from HDMI

IN)

HDMI video input

DB15 analog input

One USB-B and two USB-A control inputs

3

RESET Button

ID Button

POWER LED

STATUS LED

CONTROLS AND INDICATORS – REAR PANEL

PWR LED

HDMI LED

STAT LED

STRM LED

POWER SUPPLY

Power Supply, External, Optional

Power over Ethernet (PoE), External, Optional

Note

ENVIRONMENTAL

Temperature

Humidity

Heat Dissipation

GENERAL

Dimensions (HWD)

Weight

Mounting Options

Recessed pushbutton

Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings

Recessed pushbutton

Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)

On solid (green) when operating power is supplied (via

PoE or local power supply)

This activity is also shown by the PWR LED on the rear panel

On flashing (green) when there is software activity

This activity is also shown by the STAT LED on the rear panel

Same as POWER LED described above

On (green) when there is a connection to a valid display

Same as STATUS LED described above

On (green) when the unit is streaming video

2.0 Amp @ 12 Volts DC; 100-240 Volts AC power supply; optional. NMX-ACC-N9312 (FGN9312)

Can be powered via a PoE switch or other equipment with a PoE source. Conforms to IEEE 802.3af Class 3

(802.3at Type 1)

In order for the unit to receive Power over Ethernet

(PoE), it must be connected to a switch or other equipment that has a PoE PSE (Power Sourcing

Equipment) port.

Warning: Do not run wiring that is connected to a PoE

PSE port outside of the building where the PSE resides.

It is for intra-building use only.

32° to 104°F (0° to 40°C)

10% to 90% RH (non-condensing)

Up to ~44 BTU/hr

1.05” x 7.888” x 5.5” (2.67 cm x 20.04 cm x 13.8 cm)

1.55 lbs (0.7 kg)

Stand alone, surface mount, wall mount, or rack mount

Surface and wall mounting requires (not included):

•NMX-ACC-N9101 (FGN9101), Mounting Wings for

4

Regulatory Compliance

Recommended Accessories

SVSI N-Series Encoders and Decoders

Rack mounting requires one of the following (not included):

•NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two

Side-by-Side for SVSI N-Series Encoders and Decoders

•NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units

FCC, CE, and NTRL

•NMX-ACC-N9312 (FGN9312), Power Supply 12V

External

•NMX-ACC-N9382 (FGN9382), 1RU Power Supply 16-

Channel 12V for up to 16 SVSI N-Series Encoders and

Decoders

•NMX-ACC-N9101 (FGN9101), Mounting Wings for

SVSI N-Series Encoders and Decoders

•NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two

Side-by-Side SVSI N-Series Encoders and Decoders

•NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units

5

About AMX by HARMAN

Founded in 1982 and acquired by HARMAN in 2014, AMX® is dedicated to providing AV solutions for an IT World. AMX solves the complexity of managing technology with reliable, consistent and scalable systems comprising control, video switching and distribution, digital signage and technology management. AMX systems are deployed worldwide in conference rooms, classrooms, network operation/command centers, homes, hotels, entertainment venues and broadcast facilities, among others. AMX is part of the HARMAN Professional Group, the only total audio, video, lighting, and control vendor in the professional AV market. HARMAN designs, manufactures and markets premier audio, video, infotainment and integrated control solutions for the automotive, consumer and professional markets. Revised 3.3.16. ©2016 Harman. All rights reserved. Specifications subject to change. www.amx.com | +1.469.624.7400 |800.222.0193

6