DataStax 2.1 Apache Cassandra Documentation
PDF
Dokumentas
Reklama
Reklama
Apache Cassandra™ 2.1 Documentation February 12, 2015 © 2015 DataStax. All rights reserved. Apache, Apache Cassandra, Apache Hadoop, Hadoop and the eye logo are trademarks of the Apache Software Foundation Contents Contents About Apache Cassandra............................................................................................... 8 What's new in Cassandra 2.1......................................................................................... 9 CQL.................................................................................................................................. 10 Understanding the architecture................................................................................... 11 Architecture in brief........................................................................................................................... 11 Internode communications (gossip).................................................................................................. 13 Failure detection and recovery............................................................................................... 13 Data distribution and replication........................................................................................................14 Consistent hashing................................................................................................................. 14 Virtual nodes...........................................................................................................................15 Data replication.......................................................................................................................16 Partitioners......................................................................................................................................... 17 Murmur3Partitioner..................................................................................................................18 RandomPartitioner.................................................................................................................. 18 ByteOrderedPartitioner........................................................................................................... 18 Snitches............................................................................................................................................. 19 Dynamic snitching...................................................................................................................19 SimpleSnitch........................................................................................................................... 19 RackInferringSnitch................................................................................................................. 19 PropertyFileSnitch................................................................................................................... 20 GossipingPropertyFileSnitch................................................................................................... 20 EC2Snitch............................................................................................................................... 21 EC2MultiRegionSnitch............................................................................................................ 22 GoogleCloudSnitch................................................................................................................. 23 CloudstackSnitch.................................................................................................................... 23 Client requests...................................................................................................................................23 Planning a cluster deployment.................................................................................... 24 Selecting hardware for enterprise implementations.......................................................................... 24 Planning an Amazon EC2 cluster..................................................................................................... 26 Calculating usable disk capacity....................................................................................................... 27 Calculating user data size.................................................................................................................28 Anti-patterns in Cassandra................................................................................................................29 Installing..........................................................................................................................32 Installing on RHEL-based systems................................................................................................... 32 Installing on Debian-based systems................................................................................................. 33 Installing the binary tarball................................................................................................................ 34 Installing on Windows systems......................................................................................................... 35 Installing on cloud providers............................................................................................................. 35 Installing on Amazon EC2......................................................................................................35 Installing on GoGrid................................................................................................................42 3 Contents Installing Oracle JRE.........................................................................................................................44 Installing the JRE on RHEL-based systems.......................................................................... 44 Installing the JRE on Debian-based systems........................................................................ 45 Recommended production settings...................................................................................................46 Initializing a cluster....................................................................................................... 49 Initializing a multiple node cluster (single data center)..................................................................... 49 Initializing a multiple node cluster (multiple data centers)................................................................ 51 Security........................................................................................................................... 55 Securing Cassandra.......................................................................................................................... 55 SSL encryption.................................................................................................................................. 55 Client-to-node encryption........................................................................................................55 Node-to-node encryption........................................................................................................ 56 Using cqlsh with SSL encryption............................................................................................56 Preparing server certificates...................................................................................................57 Internal authentication....................................................................................................................... 58 Internal authentication............................................................................................................ 58 Configuring authentication...................................................................................................... 58 Logging in using cqlsh............................................................................................................59 Internal authorization......................................................................................................................... 60 Object permissions................................................................................................................. 60 Configuring internal authorization...........................................................................................60 Configuring firewall port access........................................................................................................ 61 Database internals......................................................................................................... 62 Storage engine.................................................................................................................................. 62 Separate table directories................................................................................................................. 62 Cassandra storage basics.................................................................................................................62 The write path to compaction.................................................................................................62 How Cassandra stores indexes............................................................................................. 65 About index updates...............................................................................................................65 The write path of an update............................................................................................................. 65 About deletes.....................................................................................................................................66 About hinted handoff writes.............................................................................................................. 66 About reads....................................................................................................................................... 68 How off-heap components affect reads................................................................................. 69 Reading from a partition.........................................................................................................70 How write patterns affect reads............................................................................................. 70 How the row cache affects reads.......................................................................................... 70 About transactions and concurrency control.....................................................................................70 Lightweight transactions......................................................................................................... 71 Atomicity..................................................................................................................................71 Consistency.............................................................................................................................72 Isolation................................................................................................................................... 72 Durability................................................................................................................................. 72 About data consistency..................................................................................................................... 73 Configuring data consistency................................................................................................. 73 Read requests........................................................................................................................ 77 Write requests.........................................................................................................................81 Configuration.................................................................................................................. 83 The cassandra.yaml configuration file...............................................................................................83 4 Contents Configuring gossip settings............................................................................................................... 97 Configuring the heap dump directory................................................................................................98 Generating tokens............................................................................................................................. 98 Configuring virtual nodes...................................................................................................................99 Enabling virtual nodes on a new cluster................................................................................ 99 Enabling virtual nodes on an existing production cluster....................................................... 99 Configuring logging..........................................................................................................................100 Commit log archive configuration....................................................................................................101 Hadoop support............................................................................................................................... 102 Operations.................................................................................................................... 105 Monitoring Cassandra..................................................................................................................... 105 Monitoring a Cassandra cluster............................................................................................105 Tuning Bloom filters........................................................................................................................ 110 Data caching....................................................................................................................................110 Configuring data caches.......................................................................................................110 Monitoring and adjusting caching.........................................................................................113 Configuring memtable throughput................................................................................................... 113 Configuring compaction................................................................................................................... 113 Compression.................................................................................................................................... 114 When to compress data....................................................................................................... 114 Configuring compression...................................................................................................... 115 Testing compaction and compression.............................................................................................116 Tuning Java resources.................................................................................................................... 116 Purging gossip state on a node......................................................................................................118 Repairing nodes.............................................................................................................................. 119 Adding or removing nodes, data centers, or clusters..................................................................... 123 Adding nodes to an existing cluster..................................................................................... 123 Adding a data center to a cluster.........................................................................................124 Replacing a dead node or dead seed node........................................................................ 125 Replacing a running node.................................................................................................... 126 Decommissioning a data center........................................................................................... 127 Removing a node................................................................................................................. 127 Switching snitches................................................................................................................ 128 Edge cases for transitioning or migrating a cluster..............................................................129 Backing up and restoring data.................................................................................. 130 Taking a snapshot...........................................................................................................................130 Deleting snapshot files.................................................................................................................... 131 Enabling incremental backups........................................................................................................ 131 Restoring from a Snapshot............................................................................................................. 131 Node restart method.............................................................................................................132 Restoring a snapshot into a new cluster........................................................................................ 133 Cassandra tools........................................................................................................... 134 The nodetool utility.......................................................................................................................... 134 cfhistograms.......................................................................................................................... 134 cfstats.................................................................................................................................... 135 cleanup..................................................................................................................................140 clearsnapshot........................................................................................................................ 141 compact.................................................................................................................................142 compactionhistory................................................................................................................. 142 compactionstats.................................................................................................................... 144 5 Contents decommission....................................................................................................................... 145 describecluster...................................................................................................................... 146 describering...........................................................................................................................146 disableautocompaction......................................................................................................... 148 disablebackup....................................................................................................................... 148 disablebinary......................................................................................................................... 149 disablegossip........................................................................................................................ 149 disablehandoff....................................................................................................................... 150 disablethrift............................................................................................................................ 150 drain...................................................................................................................................... 150 enableautocompaction.......................................................................................................... 151 enablebackup........................................................................................................................ 151 enablebinary..........................................................................................................................152 enablegossip......................................................................................................................... 152 enablehandoff....................................................................................................................... 153 enablethrift............................................................................................................................ 153 flush.......................................................................................................................................154 getcompactionthreshold........................................................................................................ 154 getendpoints..........................................................................................................................155 getlogginglevels.................................................................................................................... 155 getsstables............................................................................................................................ 156 getstreamthroughput............................................................................................................. 156 gossipinfo.............................................................................................................................. 157 help....................................................................................................................................... 157 info........................................................................................................................................ 158 invalidatekeycache................................................................................................................ 158 invalidaterowcache................................................................................................................159 join.........................................................................................................................................159 listsnapshots......................................................................................................................... 160 move..................................................................................................................................... 160 netstats..................................................................................................................................161 pausehandoff........................................................................................................................ 162 proxyhistograms.................................................................................................................... 162 rangekeysample.................................................................................................................... 163 rebuild................................................................................................................................... 164 rebuild_index......................................................................................................................... 164 refresh................................................................................................................................... 165 reloadtriggers........................................................................................................................ 165 removenode.......................................................................................................................... 166 repair..................................................................................................................................... 167 resetlocalschema.................................................................................................................. 169 resumehandoff...................................................................................................................... 169 ring........................................................................................................................................ 170 scrub..................................................................................................................................... 171 setcachecapacity...................................................................................................................172 setcachekeystosave.............................................................................................................. 172 setcompactionthreshold........................................................................................................ 173 setcompactionthroughput...................................................................................................... 174 sethintedhandoffthrottlekb..................................................................................................... 174 setlogginglevel...................................................................................................................... 175 setstreamthroughput............................................................................................................. 176 settraceprobability................................................................................................................. 176 snapshot................................................................................................................................177 status.....................................................................................................................................179 statusbinary........................................................................................................................... 180 statusthrift..............................................................................................................................181 6 Contents stop....................................................................................................................................... 181 stopdaemon.......................................................................................................................... 182 tpstats....................................................................................................................................182 truncatehints..........................................................................................................................184 upgradesstables.................................................................................................................... 185 version...................................................................................................................................185 Cassandra bulk loader (sstableloader)........................................................................................... 186 The cassandra utility....................................................................................................................... 188 The cassandra-stress tool............................................................................................................... 191 Using the Daemon Mode..................................................................................................... 194 Interpreting the output of cassandra-stress..........................................................................195 The sstablescrub utility....................................................................................................................195 The sstablesplit utility...................................................................................................................... 196 The sstablekeys utility..................................................................................................................... 196 The sstableupgrade tool..................................................................................................................197 References.................................................................................................................... 198 Starting and stopping Cassandra....................................................................................................198 Starting Cassandra as a service.......................................................................................... 198 Starting Cassandra as a stand-alone process..................................................................... 198 Stopping Cassandra as a service........................................................................................ 198 Stopping Cassandra as a stand-alone process................................................................... 198 Clearing the data as a service............................................................................................. 199 Clearing the data as a stand-alone process........................................................................ 199 Install locations................................................................................................................................ 199 Tarball installation directories............................................................................................... 199 Package installation directories............................................................................................ 200 Cassandra include file..................................................................................................................... 201 Cassandra-CLI utility (deprecated)..................................................................................................201 Table attributes..................................................................................................................... 202 Moving data to/from other databases....................................................................... 205 Troubleshooting........................................................................................................... 206 Peculiar Linux kernel performance problem on NUMA systems.....................................................206 Reads are getting slower while writes are still fast.........................................................................206 Nodes seem to freeze after some period of time........................................................................... 206 Nodes are dying with OOM errors..................................................................................................207 Nodetool or JMX connections failing on remote nodes.................................................................. 207 Handling schema disagreements.................................................................................................... 207 View of ring differs between some nodes.......................................................................................208 Java reports an error saying there are too many open files...........................................................208 Insufficient user resource limits errors............................................................................................ 208 Cannot initialize class org.xerial.snappy.Snappy............................................................................ 209 Firewall idle connection timeout causing nodes to lose communication......................................... 210 Release notes...............................................................................................................212 Using the docs.............................................................................................................214 7 About Apache Cassandra About Apache Cassandra Documentation for developers and administrators on installing, configuring, and using the features and capabilities of Apache Cassandra scalable open source NoSQL database. Apache Cassandra™ is a massively scalable open source NoSQL database. Cassandra is perfect for managing large amounts of data across multiple data centers and the cloud. Cassandra delivers continuous availability, linear scalability, and operational simplicity across many commodity servers with no single point of failure, along with a powerful data model designed for maximum flexibility and fast response times. How does Cassandra work? Cassandra has a “masterless” architecture, meaning all nodes are the same. Cassandra provides automatic data distribution across all nodes that participate in a “ring” or database cluster. There is nothing programmatic that a developer or administrator needs to do or code to distribute data across a cluster because data is transparently partitioned across all nodes in a cluster. Cassandra also provides customizable replication, storing redundant copies of data across nodes that participate in a Cassandra ring. If any node in a cluster goes down, one or more copies of that node’s data is still available on other machines in the cluster. Replication can be configured to work across one data center, many data centers, and multiple cloud availability zones. Cassandra supplies linear scalability, meaning that capacity may be easily added simply by adding new nodes online. For example, if 2 nodes can handle 100,000 operations per second, 4 nodes will support 200,000 operations/sec and 8 nodes will tackle 400,000 operations/sec: To gain an understanding of Cassandra's origins and evolution, see "Facebook’s Cassandra paper, annotated and compared to Apache Cassandra 2.0", by project chair Jonathan Ellis. 8 What's new in Cassandra 2.1 What's new in Cassandra 2.1 New features: • • • • • User-defined types Collection indexes Better implementation of counters that makes them safer, simpler, and typically faster New listsnapshots and reloadtriggers nodetool commands Improved metrics reporting through the use of the metrics-core library Performance improvements: • • • • Faster reads and writes than previous releases Improved row cache Reduced heap used by memtables New counters implementation Compaction and repair improvements: • • • Post-compaction read performance A configurable percentage of cold SSTables can be ignored Incremental node repair Other notable changes: • • • • • • • Improved Hadoop support Unique table IDs Improved logging using logback New configuration options for allocating and managing memtable memory Improvements to bootstrapping a node that ensure data consistency Bundled JNA A number of other CQL and cqlsh changes Release notes cover key changes in Cassandra 2.1. For a detailed list of changes, see the change log. 9 CQL CQL Cassandra Query Language (CQL) is the default and primary interface into the Cassandra DBMS. Using CQL is similar to using SQL (Structured Query Language). CQL and SQL share the same abstract idea of a table constructed of columns and rows. The main difference from SQL is that Cassandra does not support joins or subqueries. Instead, Cassandra emphasizes denormalization through CQL features like collections and clustering specified at the schema level. CQL is the recommended way to interact with Cassandra. Performance and the simplicity of reading and using CQL is an advantage of modern Cassandra over older Cassandra APIs. The CQL documentation contains a data modeling section, examples, and command reference. The cqlsh utility for using CQL interactively on the command line is also covered. 10 Understanding the architecture Understanding the architecture Architecture in brief Cassandra is designed to handle big data workloads across multiple nodes with no single point of failure. Its architecture is based on the understanding that system and hardware failures can and do occur. Cassandra addresses the problem of failures by employing a peer-to-peer distributed system across homogeneous nodes where data is distributed among all nodes in the cluster. Each node exchanges information across the cluster every second. A sequentially written commit log on each node captures write activity to ensure data durability. Data is then indexed and written to an in-memory structure, called a memtable, which resembles a write-back cache. Once the memory structure is full, the data is written to disk in an SSTable data file. All writes are automatically partitioned and replicated throughout the cluster. Using a process called compaction Cassandra periodically consolidates SSTables, discarding obsolete data and tombstones (an indicator that data was deleted). Cassandra is a row-oriented database. Cassandra's architecture allows any authorized user to connect to any node in any data center and access data using the CQL language. For ease of use, CQL uses a similar syntax to SQL. From the CQL perspective the database consists of tables. Typically, a cluster has one keyspace per application. Developers can access CQL through cqlsh as well as via drivers for application languages. Client read or write requests can be sent to any node in the cluster. When a client connects to a node with a request, that node serves as the coordinator for that particular client operation. The coordinator acts as a proxy between the client application and the nodes that own the data being requested. The coordinator determines which nodes in the ring should get the request based on how the cluster is configured. For more information, see Client requests. Key structures • Node • Where you store your data. It is the basic infrastructure component of Cassandra. Data center • A collection of related nodes. A data center can be a physical data center or virtual data center. Different workloads should use separate data centers, either physical or virtual. Replication is set by data center. Using separate data centers prevents Cassandra transactions from being impacted by other workloads and keeps requests close to each other for lower latency. Depending on the replication factor, data can be written to multiple data centers. However, data centers should never span physical locations. Cluster • A cluster contains one or more data centers. It can span physical locations. Commit log • All data is written first to the commit log for durability. After all its data has been flushed to SSTables, it can be archived, deleted, or recycled. Table • A collection of ordered columns fetched by row. A row consists of columns and have a primary key. The first part of the key is a column name. SSTable 11 Understanding the architecture A sorted string table (SSTable) is an immutable data file to which Cassandra writes memtables periodically. SSTables are append only and stored on disk sequentially and maintained for each Cassandra table. Key components for configuring Cassandra • Gossip • A peer-to-peer communication protocol to discover and share location and state information about the other nodes in a Cassandra cluster. Gossip information is also persisted locally by each node to use immediately when a node restarts. Partitioner A partitioner determines how to distribute the data across the nodes in the cluster and which node to place the first copy of data on. Basically, a partitioner is a hash function for computing the token of a partition key. Each row of data is uniquely identified by a partition key and distributed across the cluster by the value of the token. The Murmur3Partitioner is the default partitioning strategy for new Cassandra clusters and the right choice for new clusters in almost all cases. • You must set the partitioner and assign the node a num_tokens value for each node. The number of tokens you assign depends on the hardware capabilities of the system. If not using virtual nodes (vnodes), use the initial_token setting instead. Replication factor • The total number of replicas across the cluster. A replication factor of 1 means that there is only one copy of each row on one node. A replication factor of 2 means two copies of each row, where each copy is on a different node. All replicas are equally important; there is no primary or master replica. You define the replication factor for each data center. Generally you should set the replication strategy greater than one, but no more than the number of nodes in the cluster. Replica placement strategy Cassandra stores copies (replicas) of data on multiple nodes to ensure reliability and fault tolerance. A replication strategy determines which nodes to place replicas on. The first replica of data is simply the first copy; it is not unique in any sense. The NetworkTopologyStrategy is highly recommended for most deployments because it is much easier to expand to multiple data centers when required by future expansion. • When creating a keyspace, you must define the replica placement strategy and the number of replicas you want. Snitch A snitch defines groups of machines into data centers and racks (the topology) that the replication strategy uses to place replicas. You must configure a snitch when you create a cluster. All snitches use a dynamic snitch layer, which monitors performance and chooses the best replica for reading. It is enabled by default and recommended for use in most deployments. Configure dynamic snitch thresholds for each node in the cassandra.yaml configuration file. • The default SimpleSnitch does not recognize data center or rack information. Use it for single-data center deployments or single-zone in public clouds. The GossipingPropertyFileSnitch is recommended for production. It defines a node's data center and rack and uses gossip for propagating this information to other nodes. The cassandra.yaml configuration file The main configuration file for setting the initialization properties for a cluster, caching parameters for tables, properties for tuning and resource utilization, timeout settings, client connections, backups, and security. By default, a node is configured to store the data it manages in a directory set in the cassandra.yaml file. 12 Understanding the architecture • • • Package installations: /var/lib/cassandra Tarball installations: install_location/data/data In a production cluster deployment, you can change the commitlog-directory to a different disk drive from the data_file_directories. System keyspace table properties You set storage configuration attributes on a per-keyspace or per-table basis programmatically or using a client application, such as CQL. Internode communications (gossip) Cassandra uses a protocol called gossip to discover location and state information about the other nodes participating in a Cassandra cluster. Gossip is a peer-to-peer communication protocol in which nodes periodically exchange state information about themselves and about other nodes they know about. The gossip process runs every second and exchanges state messages with up to three other nodes in the cluster. The nodes exchange information about themselves and about the other nodes that they have gossiped about, so all nodes quickly learn about all other nodes in the cluster. A gossip message has a version associated with it, so that during a gossip exchange, older information is overwritten with the most current state for a particular node. To prevent partitions in gossip communications, use the same list of seed nodes for all nodes in a cluster. This is most critical the first time a node starts up. By default, a node remembers other nodes it has gossiped with between subsequent restarts. The seed node designation has no purpose other than bootstrapping the gossip process for new nodes joining the cluster. Seed nodes are not a single point of failure, nor do they have any other special purpose in cluster operations beyond the bootstrapping of nodes. Attention: In multiple data-center clusters, the seed list should include at least one node from each data center (replication group). More than a single seed node per data center is recommended for fault tolerance. Otherwise, gossip has to communicate with another data center when bootstraping a node. Making every node a seed node is not recommended because of increased maintenance and reduced performance. Failure detection and recovery Failure detection is a method for locally determining from gossip state and history if another node in the system is up or down. Cassandra uses this information to avoid routing client requests to unreachable nodes whenever possible. (Cassandra can also avoid routing requests to nodes that are alive, but performing poorly, through the dynamic snitch.) The gossip process tracks state from other nodes both directly (nodes gossiping directly to it) and indirectly (nodes communicated about secondhand, thirdhand, and so on). Rather than have a fixed threshold for marking failing nodes, Cassandra uses an accrual detection mechanism to calculate a per-node threshold that takes into account network performance, workload, and historical conditions. During gossip exchanges, every node maintains a sliding window of inter-arrival times of gossip messages from other nodes in the cluster. Configuring the phi_convict_threshold property adjusts the sensitivity of the failure detector. Lower values increase the likelihood that an unresponsive node will be marked as down, while higher values decrease the likelihood that transient failures will cause a node failure. Use the default value for most situations, but increase it to 12 for Amazon EC2 (due to frequently enountered network congestion). Node failures can result from various causes such as hardware failures and network outages. Node outages are often transient but can last for extended periods. Because a node outage rarely signifies a permanent departure from the cluster it does not automatically result in permanent removal of the node from the ring. Other nodes will periodically try to re-establish contact with failed nodes to see if they are 13 Understanding the architecture back up. To permanently change a node's membership in a cluster, administrators must explicitly add or remove nodes from a Cassandra cluster using the nodetool utility or OpsCenter. When a node comes back online after an outage, it may have missed writes for the replica data it maintains. Once the failure detector marks a node as down, missed writes are stored by other replicas for a period of time providing hinted handoff is enabled. If a node is down for longer than max_hint_window_in_ms (3 hours by default), hints are no longer saved. Nodes that die may have stored undelivered hints. Run a repair after recovering a node that has been down for an extended period. Moreover, you should routinely run nodetool repair on all nodes to ensure they have consistent data. For more explanation about hint storage, see Modern hinted handoff. Data distribution and replication In Cassandra, data distribution and replication go together. Data is organized by table and identified by a primary key, which determines which node the data is stored on. Replicas are copies of rows. When data is first written, it is also referred to as a replica. Factors influencing replication include: • • • • Virtual nodes: assigns data ownership to physical machines. Partitioner: partitions the data across the cluster. Replication strategy: determines the replicas for each row of data. Snitch: defines the topology information that the replication strategy uses to place replicas. Consistent hashing Consistent hashing allows distributing data across a cluster which minimizes reorganization when nodes are added or removed. Consistent hashing partitions data based on the partition key. (For an explanation of partition keys and primary keys, see the Data modeling example in CQL for Cassandra 2.0.) For example, if you have the following data: name age car gender jim 36 camaro M carol 37 bmw F johnny 12 M suzy 10 F Cassandra assigns a hash value to each partition key: Partition key Murmur3 hash value jim -2245462676723223822 carol 7723358927203680754 johnny -6723372854036780875 suzy 1168604627387940318 Each node in the cluster is responsible for a range of data based on the hash value: 14 Understanding the architecture Hash values in a 4 node cluster - 9223372036854775808 to - 4611686018427387903 A - 4611686018427387904 to -1 D Data Center Alpha 4611686018427387904 to 9223372036854775807 B C -1 to 4611686018427387903 Cassandra places the data on each node according to the value of the partition key and the range that the node is responsible for. For example, in a four node cluster, the data in this example is distributed as follows: Node Start range End range PartitionHash value key A -9223372036854775808 -4611686018427387903 johnny -6723372854036780875 B -4611686018427387904 -1 jim -2245462676723223822 C 0 4611686018427387903 suzy 1168604627387940318 D 4611686018427387904 9223372036854775807 carol 7723358927203680754 Virtual nodes Overview of virtual nodes (vnodes). Vnodes simplify many tasks in Cassandra: • • • • You no longer have to calculate and assign tokens to each node. Rebalancing a cluster is no longer necessary when adding or removing nodes. When a node joins the cluster, it assumes responsibility for an even portion of data from the other nodes in the cluster. If a node fails, the load is spread evenly across other nodes in the cluster. Rebuilding a dead node is faster because it involves every other node in the cluster. Improves the use of heterogeneous machines in a cluster. You can assign a proportional number of vnodes to smaller and larger machines. For more information, see the article Virtual nodes in Cassandra 1.2 and Enabling virtual nodes on an existing production cluster. How data is distributed across a cluster (using virtual nodes) Prior to version 1.2, you had to calculate and assign a single token to each node in a cluster. Each token determined the node's position in the ring and its portion of data according to its hash value. Starting in version 1.2, Cassandra allows many tokens per node. The new paradigm is called virtual nodes (vnodes). Vnodes allow each node to own a large number of small partition ranges distributed throughout the cluster. Vnodes also use consistent hashing to distribute data but using them doesn't require token generation and assignment. 15 Understanding the architecture Figure 1: Virtual vs single-token architecture The top portion of the graphic shows a cluster without vnodes. In this paradigm, each node is assigned a single token that represents a location in the ring. Each node stores data determined by mapping the partition key to a token value within a range from the previous node to its assigned value. Each node also contains copies of each row from other nodes in the cluster. For example, range E replicates to nodes 5, 6, and 1. Notice that a node owns exactly one contiguous partition range in the ring space. The bottom portion of the graphic shows a ring with vnodes. Within a cluster, virtual nodes are randomly selected and non-contiguous. The placement of a row is determined by the hash of the partition key within many smaller partition ranges belonging to each node. Data replication Cassandra stores replicas on multiple nodes to ensure reliability and fault tolerance. A replication strategy determines the nodes where replicas are placed. The total number of replicas across the cluster is referred to as the replication factor. A replication factor of 1 means that there is only one copy of each row on one node. A replication factor of 2 means two copies of each row, where each copy is on a different node. All replicas are equally important; there is no primary or master replica. As a general rule, the replication factor should not exceed the number of nodes in the cluster. However, you can increase the replication factor and then add the desired number of nodes later. Two replication strategies are available: • • SimpleStrategy: Use for a single data center only. If you ever intend more than one data center, use the NetworkTopologyStrategy. NetworkTopologyStrategy: Highly recommended for most deployments because it is much easier to expand to multiple data centers when required by future expansion. SimpleStrategy 16 Understanding the architecture Use only for a single data center. SimpleStrategy places the first replica on a node determined by the partitioner. Additional replicas are placed on the next nodes clockwise in the ring without considering topology (rack or data center location). NetworkTopologyStrategy Use NetworkTopologyStrategy when you have (or plan to have) your cluster deployed across multiple data centers. This strategy specify how many replicas you want in each data center. NetworkTopologyStrategy places replicas in the same data center by walking the ring clockwise until reaching the first node in another rack. NetworkTopologyStrategy attempts to place replicas on distinct racks because nodes in the same rack (or similar physical grouping) often fail at the same time due to power, cooling, or network issues. When deciding how many replicas to configure in each data center, the two primary considerations are (1) being able to satisfy reads locally, without incurring cross data-center latency, and (2) failure scenarios. The two most common ways to configure multiple data center clusters are: • • Two replicas in each data center: This configuration tolerates the failure of a single node per replication group and still allows local reads at a consistency level of ONE. Three replicas in each data center: This configuration tolerates either the failure of a one node per replication group at a strong consistency level of LOCAL_QUORUM or multiple node failures per data center using consistency level ONE. Asymmetrical replication groupings are also possible. For example, you can have three replicas in one data center to serve real-time application requests and use a single replica elsewhere for running analytics. Choosing keyspace replication options To set the replication strategy for a keyspace, see CREATE KEYSPACE. When you use NetworkToplogyStrategy, during creation of the keyspace, you use the data center names defined for the snitch used by the cluster. To place replicas in the correct location, Cassandra requires a keyspace definition that uses the snitch-configured data center names. For example, if the cluster uses the PropertyFileSnitch, create the keyspace using the user-defined data center and rack names in the cassandra-topologies.properties file. If the cluster uses the EC2Snitch, create the keyspace using EC2 data center and rack names. Partitioners A partitioner determines how data is distributed across the nodes in the cluster (including replicas). Basically, a partitioner is a function for deriving a token representing a row from its partion key, typically by hashing. Each row of data is then distributed across the cluster by the value of the token. Both the Murmur3Partitioner and RandomPartitioner use tokens to help assign equal portions of data to each node and evenly distribute data from all the tables throughout the ring or other grouping, such as a keyspace. This is true even if the tables use different partition keys, such as usernames or timestamps. Moreover, the read and write requests to the cluster are also evenly distributed and load balancing is simplified because each part of the hash range receives an equal number of rows on average. For more detailed information, see Consistent hashing. Cassandra offers the following partitioners: • • • Murmur3Partitioner (default): uniformly distributes data across the cluster based on MurmurHash hash values. RandomPartitioner: uniformly distributes data across the cluster based on MD5 hash values. ByteOrderedPartitioner: keeps an ordered distribution of data lexically by key bytes The Murmur3Partitioner is the default partitioning strategy for new Cassandra clusters and the right choice for new clusters in almost all cases. Set the partitioner in the cassandra.yaml file: 17 Understanding the architecture • • • Murmur3Partitioner: org.apache.cassandra.dht.Murmur3Partitioner RandomPartitioner: org.apache.cassandra.dht.RandomPartitioner ByteOrderedPartitioner: org.apache.cassandra.dht.ByteOrderedPartitioner Note: If using virtual nodes (vnodes), you do not need to calculate the tokens. If not using vnodes, you must calculate the tokens to assign to the initial_token parameter in the cassandra.yaml file. See Generating tokens and use the method for the type of partitioner you are using. Murmur3Partitioner The Murmur3Partitioner provides faster hashing and improved performance than the previous default partitioner (RandomPartitioner). You can only use Murmur3Partitioner for new clusters; you cannot change the partitioner in existing clusters. The Murmur3Partitioner uses the MurmurHash function. This hashing function creates a 6463 63 bit hash value of the partition key. The possible range of hash values is from -2 to +2 -1. When using the Murmur3Partitioner, you can page through all rows using the token function in a CQL query. RandomPartitioner The default partitioner prior to Cassandra 1.2. The RandomPartitioner is included for backwards compatibility. You can use it in later versions of Cassandra, even when using virtual nodes (vnodes). However, if you don't use vnodes, you must calculate the tokens, as described in Generating tokens. The RandomPartition distributes data evenly across the nodes using an MD5 hash value of the row 127 key. The possible range of hash values is from 0 to 2 -1. When using the RandomPartitioner, you can page through all rows using the token function in a CQL query. ByteOrderedPartitioner The ByteOrderedPartitioner is included for backwards compatibility. Cassandra provides this partitioner for ordered partitioning. This partitioner orders rows lexically by key bytes. You calculate tokens by looking at the actual values of your partition key data and using a hexadecimal representation of the leading character(s) in a key. For example, if you wanted to partition rows alphabetically, you could assign an A token using its hexadecimal representation of 41. Using the ordered partitioner allows ordered scans by primary key. This means you can scan rows as though you were moving a cursor through a traditional index. For example, if your application has user names as the partition key, you can scan rows for users whose names fall between Jake and Joe. This type of query is not possible using randomly partitioned partition keys because the keys are stored in the order of their MD5 hash (not sequentially). Although having the capability to do range scans on rows sounds like a desirable feature of ordered partitioners, there are ways to achieve the same functionality using table indexes. Using an ordered partitioner is not recommended for the following reasons: Difficult load balancing More administrative overhead is required to load balance the cluster. An ordered partitioner requires administrators to manually calculate partition ranges based on their estimates of the partition key distribution. In practice, this requires actively moving node tokens around to accommodate the actual distribution of data once it is loaded. Sequential writes can cause hot spots 18 Understanding the architecture If your application tends to write or update a sequential block of rows at a time, then the writes are not be distributed across the cluster; they all go to one node. This is frequently a problem for applications dealing with timestamped data. Uneven load balancing for multiple tables If your application has multiple tables, chances are that those tables have different row keys and different distributions of data. An ordered partitioner that is balanced for one table may cause hot spots and uneven distribution for another table in the same cluster. Snitches A snitch determines which data centers and racks nodes belong to. Snitches inform Cassandra about the network topology so that requests are routed efficiently and allows Cassandra to distribute replicas by grouping machines into data centers and racks. Specifically, the replication strategy places the replicas based on the information provided by the new snitch. All nodes must return to the same rack and data center. Cassandra does its best not to have more than one replica on the same rack (which is not necessarily a physical location). Note: If you change snitches, you may need to perform additional steps because the snitch affects where replicas are placed. See Switching snitches. Dynamic snitching Monitors the performance of reads from the various replicas and chooses the best replica based on this history. By default, all snitches also use a dynamic snitch layer that monitors read latency and, when possible, routes requests away from poorly-performing nodes. The dynamic snitch is enabled by default and is recommended for use in most deployments. For information on how this works, see Dynamic snitching in Cassandra: past, present, and future. Configure dynamic snitch thresholds for each node in the cassandra.yaml configuration file. For more information, see the properties listed under Failure detection and recovery. SimpleSnitch For single-data center deployments only. The SimpleSnitch (the default) does not recognize data center or rack information. Use it for single-data center deployments or single-zone in public clouds. Using a SimpleSnitch, you define the keyspace to use SimpleStrategy and specify a replication factor. RackInferringSnitch Determines the location of nodes by rack and data center corresponding to the IP addresses. The RackInferringSnitch determines the location of nodes by rack and data center, which are assumed to correspond to the 3rd and 2nd octet of the node's IP address, respectively. 19 Understanding the architecture PropertyFileSnitch Determines the location of nodes by rack and data center. About this task This snitch uses a user-defined description of the network details located in the cassandratopology.properties file. Use this snitch when your node IPs are not uniform or if you have complex replication grouping requirements. When using this snitch, you can define your data center names to be whatever you want. Make sure that the data center names you define correlate to the name of your data centers in your keyspace definition. Every node in the cluster should be described in the cassandratopology.properties file, and this file should be exactly the same on every node in the cluster. The location of the cassandra-topology.properties file depends on the type of installation: • • Package installations: /etc/cassandra/conf/cassandra-topology.properties Tarball installations: install_location/conf/cassandra-topology.properties Procedure If you had non-uniform IPs and two physical data centers with two racks in each, and a third logical data center for replicating analytics data, the cassandra-topology.properties file might look like this: # Data Center One 175.56.12.105 =DC1:RAC1 175.50.13.200 =DC1:RAC1 175.54.35.197 =DC1:RAC1 120.53.24.101 =DC1:RAC2 120.55.16.200 =DC1:RAC2 120.57.102.103 =DC1:RAC2 # Data Center Two 110.56.12.120 =DC2:RAC1 110.50.13.201 =DC2:RAC1 110.54.35.184 =DC2:RAC1 50.33.23.120 =DC2:RAC2 50.45.14.220 =DC2:RAC2 50.17.10.203 =DC2:RAC2 # Analytics Replication Group 172.106.12.120 =DC3:RAC1 172.106.12.121 =DC3:RAC1 172.106.12.122 =DC3:RAC1 # default for unknown nodes default =DC3:RAC1 GossipingPropertyFileSnitch Automatically updates all nodes using gossip when adding new nodes. The GossipingPropertyFileSnitch defines a local node's data center and rack; it uses gossip for propagating this information to other nodes. The cassandra-rackdc.properties file defines the default data center and rack used by this snitch: dc=DC1 rack=RAC1 The location of the conf directory depends on the type of installation: 20 Understanding the architecture • • Package installations: /etc/cassandra/conf/cassandra-rackdc.properties Tarball installations: install_location/conf/cassandra-rackdc.properties To migrate from the PropertyFileSnitch to the GossipingPropertyFileSnitch, update one node at a time to allow gossip time to propagate. The PropertyFileSnitch is used as a fallback when cassandratopologies.properties is present. EC2Snitch Use with Amazon EC2 in a single region. Use the EC2Snitch for simple cluster deployments on Amazon EC2 where all nodes in the cluster are within a single region. The region name is treated as the data center name and availability zones are treated as racks within a data center. For example, if a node is in the us-east-1 region, us-east is the data center name and 1 is the rack location. (Racks are important for distributing replicas, but not for data center naming.) Because private IPs are used, this snitch does not work across multiple regions. If you are using only a single data center, you do not need to specify any properties. If you need multiple data centers, set the dc_suffix options in the cassandra-rackdc.properties file. Any other lines are ignored. The location of this file depends on the type of installation: • • Package installations: /etc/cassandra/conf/cassandra-rackdc.properties Tarball installations: install_location/conf/cassandra-rackdc.properties For example, for each node within the us-east region, specify the data center in its cassandrarackdc.properties file: • node0 • dc_suffix=_1_cassandra node1 • dc_suffix=_1_cassandra node2 • dc_suffix=_1_cassandra node3 • dc_suffix=_1_cassandra node4 • dc_suffix=_1_analytics node5 dc_suffix=_1_search This results in three data centers for the region: us-east_1_cassandra us-east_1_analytics us-east_1_search Note: The data center naming convention in this example is based on the workload. You can use other conventions, such as DC1, DC2 or 100, 200. Keyspace strategy options When defining your keyspace strategy options, use the EC2 region name, such as ``us-east``, as your data center name. 21 Understanding the architecture EC2MultiRegionSnitch Use with Amazon EC2 in multiple regions. Use the EC2MultiRegionSnitch for deployments on Amazon EC2 where the cluster spans multiple regions. The region name is treated as the data center name and availability zones are treated as racks within a data center. For example, if a node is in the us-east-1 region, us-east is the data center name and 1 is the rack location. (Racks are important for distributing replicas, but not for data center naming.) The dc_suffix options in the cassandra-rackdc.properties file defines the data centers used by this snitch. Any other lines are ignored. The location of this file depends on the type of installation: • • Package installations: /etc/cassandra/conf/cassandra-rackdc.properties Tarball installations: install_location/conf/cassandra-rackdc.properties For example, for two regions with the data centers named for their workloads and two cassandra data centers: For each node in the us-east region, specify its data center in cassandra-rackdc.properties file: • node0 • dc_suffix=_1_cassandra node1 • dc_suffix=_1_cassandra node2 • dc_suffix=_2_cassandra node3 • dc_suffix=_2_cassandra node4 • dc_suffix=_1_analytics node5 dc_suffix=_1_search This results in four us-east data centers: us-east_1_cassandra us-east_2_cassandra us-east_1_analytics us-east_1_search For each node in the us-west region, specify its data center in cassandra-rackdc.properties file: • node0 • dc_suffix=_1_cassandra node1 • dc_suffix=_1_cassandra node2 • dc_suffix=_2_cassandra node3 • dc_suffix=_2_cassandra node4 • dc_suffix=_1_analytics node5 dc_suffix=_1_search 22 Understanding the architecture This results in four us-west data centers: us-west_1_cassandra us-west_2_cassandra us-west_1_analytics us-west_1_search Note: The data center naming convention in this example is based on the workload. You can use other conventions, such as DC1, DC2 or 100, 200. Other configuration settings This snitch uses public IP as broadcast_address to allow cross-region connectivity. This means you must configure each node for cross-region communication: 1. Set the listen_address to the private IP address of the node, and the broadcast_address is set to the public IP address of the node. This allows Cassandra nodes in one EC2 region to bind to nodes in another region, thus enabling multiple data center support. (For intra-region traffic, Cassandra switches to the private IP after establishing a connection.) 2. Set the addresses of the seed nodes in the cassandra.yaml file to that of the public IP (private IP are not routable between networks). For example: seeds: 50.34.16.33, 60.247.70.52 To find the public IP address, from each of the seed nodes in EC2: $ curl http://instance-data/latest/meta-data/public-ipv4 Note: Do not make all nodes seeds, see Internode communications (gossip). 3. Be sure that the storage_port or ssl_storage_port is open on the public IP firewall. Keyspace strategy options When defining your keyspace strategy options, use the EC2 region name, such as ``us-east``, as your data center name. GoogleCloudSnitch Use the GoogleCloudSnitch for Cassandra deployments on Google Cloud Platform across one or more regions. The region is treated as a data center and the availability zones are treated as racks within the data center. All communication occurs over private IP addresses within the same logical network. CloudstackSnitch Use the CloudstackSnitch for Apache Cloudstack environments. Because zone naming is free-form in Apache Cloudstack, this snitch uses the widely-used <country> <location> <az> notation. Client requests Client read or write requests can be sent to any node in the cluster because all nodes in Cassandra are peers. When a client connects to a node and issues a read or write request, that node serves as the coordinator for that particular client operation. The job of the coordinator is to act as a proxy between the client application and the nodes (or replicas) that own the data being requested. The coordinator determines which nodes in the ring should get the request based on the cluster configured partitioner and replica placement strategy. 23 Planning a cluster deployment Planning a cluster deployment When planning a Cassandra cluster deployment, you should have a good idea of the initial volume of data you plan to store and a good estimate of your typical application workload. The following topics provide information for planning your cluster: Selecting hardware for enterprise implementations Choosing appropriate hardware depends on selecting the right balance of the following resources: memory, CPU, disks, number of nodes, and network. Memory The more memory a Cassandra node has, the better read performance. More RAM also allows memory tables (memtables) to hold more recently written data. Larger memtables lead to a fewer number of SSTables being flushed to disk and fewer files to scan during a read. The ideal amount of RAM depends on the anticipated size of your hot data. • • • For dedicated hardware, the optimal price-performance sweet spot is 16GB to 64GB; the minimum is 8GB. For a virtual environments, the optimal range may be 8GB to 16GB; the minimum is 4GB. For setting Java heap space, see Tuning Java resources. CPU Insert-heavy workloads are CPU-bound in Cassandra before becoming memory-bound. (All writes go to the commit log, but Cassandra is so efficient in writing that the CPU is the limiting factor.) Cassandra is highly concurrent and uses as many CPU cores as available: • • For dedicated hardware, 8-core CPU processors are the current price-performance sweet spot. For virtual environments, consider using a provider that allows CPU bursting, such as Rackspace Cloud Servers. Disk Disk space depends on usage, so it's important to understand the mechanism. Cassandra writes data to disk when appending data to the commit log for durability and when flushing memtable to SSTable data files for persistent storage. The commit log has a different access pattern (read/writes ratio) than the pattern for accessing data from SSTables. This is more important for spinning disks than for SSDs (solid state drives). See the recommendations below. SSTables are periodically compacted. Compaction improves performance by merging and rewriting data and discarding old data. However, depending on the type of compaction strategy and size of the compactions, during compaction disk utilization and data directory volume temporarily increases. For this reason, you should leave an adequate amount of free disk space available on a node. For large compactions, leave an adequate amount of free disk space available on a node: 50% (worst case) for SizeTieredCompactionStrategy and DateTieredCompactionStrategy, and 10% for LeveledCompactionStrategy. For more information about compaction, see: • • • • Compaction The Apache Cassandra storage engine Leveled Compaction in Apache Cassandra When to Use Leveled Compaction For information on calculating disk size, see Calculating usable disk capacity. 24 Planning a cluster deployment Recommendations: Capacity per node Most workloads work best with a capacity under 500GB to 1TB per node depending on I/O. Maximum recommended capacity for Cassandra 1.2 and later is 3 to 5TB per node for uncompressed data. For Cassandra 1.1, it is 500 to 800GB per node. Be sure to account for replication. Capacity and I/O When choosing disks, consider both capacity (how much data you plan to store) and I/O (the write/read throughput rate). Some workloads are best served by using less expensive SATA disks and scaling disk capacity and I/O by adding more nodes (with more RAM). Solid-state drives SSDs are recommended for Cassandra. The NAND Flash chips that power SSDs provide extremely low-latency response times for random reads while supplying ample sequential write performance for compaction operations. A large variety of SSDs are available on the market from server vendors and thirdparty drive manufacturers. DataStax customers that need help in determining the most cost-effective option for a given deployment and workload, should contact their Solutions Engineer or Architect. Unlike spinning disks, it's all right to store both commit logs and SSTables are on the same mount point. Number of disks - SATA Ideally Cassandra needs at least two disks, one for the commit log and the other for the data directories. At a minimum the commit log should be on its own partition. Commit log disk - SATA The disk need not be large, but it should be fast enough to receive all of your writes as appends (sequential I/O). Data disks Use one or more disks and make sure they are large enough for the data volume and fast enough to both satisfy reads that are not cached in memory and to keep up with compaction. RAID on data disks It is generally not necessary to use RAID for the following reasons: • • Data is replicated across the cluster based on the replication factor you've chosen. Starting in version 1.2, Cassandra includes a JBOD (Just a bunch of disks) feature to take care of disk management. Because Cassandra properly reacts to a disk failure either by stopping the affected node or by blacklisting the failed drive, you can deploy Cassandra nodes with large disk arrays without the overhead of RAID 10. You can configure Cassandra to stop the affected node or blacklist the drive according to your availability/consistency requirements. RAID on the commit log disk Generally RAID is not needed for the commit log disk. Replication adequately prevents data loss. If you need extra redundancy, use RAID 1. Extended file systems DataStax recommends deploying Cassandra on XFS or ext4. On ext2 or ext3, the maximum file size is 2TB even using a 64-bit kernel. On ext4 it is 16TB. Because Cassandra can use almost half your disk space for a single file when using SizeTieredCompactionStrategy, use XFS when using large disks, particularly if using a 32-bit kernel. XFS file size limits are 16TB max on a 32-bit kernel, and essentially unlimited on 64-bit. Number of nodes Prior to version 1.2, the recommended size of disk space per node was 300 to 500GB. Improvement to Cassandra 1.2, such as JBOD support, virtual nodes (vnodes), off-heap Bloom filters, and parallel leveled compaction (SSD nodes only), allow you to use few machines with multiple terabytes of disk space. 25 Planning a cluster deployment Network Since Cassandra is a distributed data store, it puts load on the network to handle read/write requests and replication of data across nodes. Be sure that your network can handle traffic between nodes without bottlenecks. You should bind your interfaces to separate Network Interface Cards (NIC). You can use public or private depending on your requirements. • • • Recommended bandwidth is 1000 Mbit/s (gigabit) or greater. Thrift/native protocols use the rpc_address. Cassandra's internal storage protocol uses the listen_address. Cassandra efficiently routes requests to replicas that are geographically closest to the coordinator node and chooses a replica in the same rack if possible; it always chooses replicas located in the same data center over replicas in a remote data center. Firewall If using a firewall, make sure that nodes within a cluster can reach each other. See Configuring firewall port access. Planning an Amazon EC2 cluster Before planning an Amazon EC2 cluster, please see the User guide in the Amazon Elastic Compute Cloud Documentation. DataStax AMI deployments The DataStax AMI is intended only for a single region and availability zone. For an EC2 cluster that spans multiple regions and availability zones, see EC2 clusters spanning multiple regions and availability zones. Use AMIs from trusted sources Use only AMIs from a trusted source. Random AMI's pose a security risk and may perform slower than expected due to the way the EC2 install is configured. The following are examples of trusted AMIs: • • • Ubuntu Amazon EC2 AMI Locator Debian AmazonEC2Image CentOS-6 images on Amazon's EC2 Cloud EC2 clusters spanning multiple regions and availability zones When creating an EC2 cluster that spans multiple regions and availability zones, use OpsCenter to set up your cluster. You can use any of the supported platforms. It is best practice to use the same platform on all nodes. If your cluster was instantiated using the DataStax AMI, use Ubuntu for the additional nodes. Configure the cluster as a multiple data center cluster using the EC2MultiRegionSnitch. The following topics describe OpsCenter provisioning: • • • Provisioning a new cluster Adding an existing cluster Adding nodes to a cluster Production Cassandra clusters on EC2 For production Cassandra clusters on EC2, use these guidelines for choosing the instance types: • • • 26 Development and light production: m3.large Moderate production: m3.xlarge SSD production with light data: c3.2xlarge Planning a cluster deployment • Largest heavy production: m3.2xlarge (PV) or i2.2xlarge (HVM) Note: The main difference between m1 and m3 instance types for use with Cassandra is that m3 instance types have faster, smaller SSD drives and m1 instance types have slower, larger rotational drives. Use m1 instance types when you have higher tolerance for latency SLAs and you require smaller cluster sizes, or both. For more aggressive workloads use m3 instance types with appropriately sized clusters. EBS volumes are not recommended EBS volumes are not recommended for Cassandra data storage volumes for the following reasons: • • • EBS volumes contend directly for network throughput with standard packets. This contention means that EBS throughput is likely to fail if you saturate a network link. EBS volumes have unreliable performance. I/O performance can be exceptionally slow, causing the system to back load reads and writes until the entire cluster becomes unresponsive. Adding capacity by increasing the number of EBS volumes per host does not scale. You can easily surpass the ability of the system to keep effective buffer caches and concurrently serve requests for all of the data it is responsible for managing. Note: Use only ephemeral instance-store devices for Cassandra data storage. For more information and graphs related to ephemeral versus EBS performance, see the blog article Systematic Look at EC2 I/O. Disk Performance Optimization To ensure high disk performance to mounted drives, it is recommended that you pre-warm your drives by writing once to every drive location before production use. Depending on EC2 conditions, you can get moderate to enormance increases in throughput. See Optimizing Disk Performance in the Amazon Elastic Compute Cloud Documentation. Storage recommendations for Cassandra 1.2 and later Cassandra 1.2 and later supports JBOD (just a bunch of disks). JBOD excels at tolerating partial failures in a disk array. Configure using the disk_failure_policy in the cassandra.yaml file. Addition information is available in the Handling Disk Failures In Cassandra 1.2 blog. Note: Cassandra JBOD support allows you to use standard disks. However, RAID0 may provide better throughput because it splits every block to be on another device. This means that writes are written in parallel fashion instead of written serially on disk. Storage recommendations for Cassandra 1.1 and earlier RAID 0 the ephemeral disks. Then put both the data directory and the commit log on that volume. This has proved to be better in practice than putting the commit log on the root volume, which is also a shared resource. For more data redundancy, consider deploying your Cassandra cluster across multiple availability zones or using EBS volumes to store your Cassandra backup files. Calculating usable disk capacity Determining how much data your Cassandra nodes can hold. About this task To calculate how much data your Cassandra nodes can hold, calculate the usable disk capacity per node and then multiply that by the number of nodes in your cluster. Remember that in a production cluster, you will typically have your commit log and data directories on different disks. 27 Planning a cluster deployment Procedure 1. Start with the raw capacity of the physical disks: raw_capacity = disk_size * number_of_data_disks 2. Calculate the formatted disk space as follows: formatted_disk_space = (raw_capacity * 0.9) During normal operations, Cassandra routinely requires disk capacity for compaction and repair operations. For optimal performance and cluster health, DataStax recommends not filling your disks to capacity, but running at 50% to 80% capacity depending on the compaction strategy and size of the compactions. 3. Calculate the usuable disk space accounting for file system formatting overhead (roughly 10 percent): usable_disk_space = formatted_disk_space * (0.5 to 0.8) Calculating user data size Accounting for storage overhead in determining user data size. About this task The size of your raw data may be larger or smaller once it is loaded into Cassandra due to storage overhead. How much depends on how well it compresses and the characteristics of your data and tables. The following calculations account for data persisted to disk, not for data stored in memory. Procedure • Determine column overhead: regular_total_column_size = column_name_size + column_value_size + 15 counter - expiring_total_column_size = column_name_size + column_value_size + 23 • • Every column in Cassandra incurs 15 bytes of overhead. Since each row in a table can have different column names as well as differing numbers of columns, metadata is stored for each column. For counter columns and expiring columns, you should add an additional 8 bytes (23 bytes total). Account for row overhead. Every row in Cassandra incurs 23 bytes of overhead. Estimate primary key index size: primary_key_index = number_of_rows * ( 32 + average_key_size ) • Every table also maintains a partition index. This estimation is in bytes. Determine replication overhead: replication_overhead = total_data_size * ( replication_factor - 1 ) The replication factor plays a role in how much disk capacity is used. For a replication factor of 1, there is no overhead for replicas (as only one copy of data is stored in the cluster). If replication factor is greater than 1, then your total data storage requirement will include replication overhead. 28 Planning a cluster deployment Anti-patterns in Cassandra Implementation or design patterns that are ineffective and/or counterproductive in Cassandra production installations. Correct patterns are suggested in most cases. Network attached storage Storing SSTables on a network attached storage (NAS) device is not recommended. Using a NAS device often results in network related bottlenecks resulting from high levels of I/O wait time on both reads and writes. The causes of these bottlenecks include: • • • Router latency. The Network Interface Card (NIC) in the node. The NIC in the NAS device. If you are required to use NAS for your environment, please contact a technical resource from DataStax for assistance. Shared network file systems Shared network file systems (NFS) have the same limitations as NAS. The temptation with NFS implementations is to place all SSTables in a node into one NFS. Doing this deprecates one of Cassandra's strongest features: No Single Point of Failure (SPOF). When all SSTables from all nodes are stored onto a single NFS, the NFS becomes a SPOF. To best use Cassandra, avoid using NFS. Excessive heap space size DataStax recommends using the default heap space size for most use cases. Exceeding this size can impair the Java virtual machine's (JVM) ability to perform fluid garbage collections (GC). The following table shows a comparison of heap space performances reported by a Cassandra user: Heap CPU utilization Queries per second Latency 40 GB 50% 750 1 second 8 GB 5% 8500 (not maxed out) 10 ms For information on heap sizing, see Tuning Java resources. Cassandra's rack feature Defining one rack for the entire cluster is the simplest and most common implementation. Multiple racks should be avoided for the following reasons: • • • Most users tend to ignore or forget rack requirements that racks should be organized in an alternating order. This order allows the data to get distributed safely and appropriately. Many users are not using the rack information effectively. For example, setting up with as many racks as nodes (or similar non-beneficial scenarios). Expanding a cluster when using racks can be tedious. The procedure typically involves several node moves and must ensure that racks are distributing data correctly and evenly. When clusters need immediate expansion, racks should be the last concern. To use racks correctly: • • Use the same number of nodes in each rack. Use one rack and place the nodes in different racks in an alternating pattern. This allows you to still get the benefits of Cassandra's rack feature, and allows for quick and fully functional expansions. Once the cluster is stable, you can swap nodes and make the appropriate moves to ensure that nodes are placed in the ring in an alternating fashion with respect to the racks. 29 Planning a cluster deployment SELECT ... IN or index lookups SELECT ... IN and index lookups (formerly secondary indexes) should be avoided except for specific scenarios. See When not to use IN in SELECT and When not to use an index in Indexing in CQL for Cassandra 2.0. Using the Byte Ordered Partitioner The Byte Ordered Partitioner (BOP) is not recommended. Use virtual nodes (vnodes) and use either the Murmur3Partitioner (default) or the RandomPartitioner. Vnodes allow each node to own a large number of small ranges distributed throughout the cluster. Using vnodes saves you the effort of generating tokens and assigning tokens to your nodes. If not using vnodes, these partitioners are recommended because all writes occur on the hash of the key and are therefore spread out throughout the ring amongst tokens range. These partitioners ensure that your cluster evenly distributes data by placing the key at the correct token using the key's hash value. Reading before writing Reads take time for every request, as they typically have multiple disk hits for uncached reads. In work flows requiring reads before writes, this small amount of latency can affect overall throughput. All write I/ O in Cassandra is sequential so there is very little performance difference regardless of data size or key distribution. Load balancers Cassandra was designed to avoid the need for load balancers. Putting load balancers between Cassandra and Cassandra clients is harmful to performance, cost, availability, debugging, testing, and scaling. All high-level clients, such as the Java and Python drivers for Cassandra, implement load balancing directly. Insufficient testing Be sure to test at scale and production loads. This the best way to ensure your system will function properly when your application goes live. The information you gather from testing is the best indicator of what throughput per node is needed for future expansion calculations. To properly test, set up a small cluster with production loads. There will be a maximum throughput associated with each node count before the cluster can no longer increase performance. Take the maximum throughput at this cluster size and apply it linearly to a cluster size of a different size. Next extrapolate (graph) your results to predict the correct cluster sizes for required throughputs for your production cluster. This allows you to predict the correct cluster sizes for required throughputs in the future. The Netflix case study shows an excellent example for testing. Lack of familiarity with Linux Linux has a great collection of tools. Become familiar with the Linux built-in tools. It will help you greatly and ease operation and management costs in normal, routine functions. The essential list of tools and techniques to learn are: • • • Parallel SSH and Cluster SSH: The pssh and cssh tools allow SSH access to multiple nodes. This is useful for inspections and cluster wide changes. Passwordless SSH: SSH authentication is carried out by using public and private keys. This allows SSH connections to easily hop from node to node without password access. In cases where more security is required, you can implement a bastion host and/or VPN. Useful common command-line tools include: • • 30 dstat: Shows all system resources instantly. For example, you can compare disk usage in combination with interrupts from your IDE controller, or compare the network bandwidth numbers directly with the disk throughput (in the same interval). top: Provides an ongoing look at CPU processor activity in real time. Planning a cluster deployment • • • System performance tools: Tools such as iostat, mpstat, iftop, sar, lsof, netstat, htop, vmstat, and similar can collect and report a variety of metrics about the operation of the system. vmstat: Reports information about processes, memory, paging, block I/O, traps, and CPU activity. iftop: Shows a list of network connections. Connections are ordered by bandwidth usage, with the pair of hosts responsible for the most traffic at the top of list. This tool makes it easier to identify the hosts causing network congestion. Running without the recommended settings Be sure to use the recommended settings in the Cassandra documentation. Also be sure to consult the Planning a Cassandra cluster deployment documentation, which discusses hardware and other recommendations before making your final hardware purchases. More anti-patterns For more about anti-patterns, visit Matt Dennis` slideshare. 31 Installing DataStax Community Installing DataStax Community Installing DataStax Community on RHEL-based systems Install using Yum repositories on RHEL, CentOS, and Oracle Linux. Note: To install on SUSE, use the Cassandra binary tarball distribution. For a complete list of supported platforms, see DataStax Community – Supported Platforms. Before you begin • • • • Yum Package Management application installed. Root or sudo access to the install machine. Latest version of Oracle Java SE Runtime Environment (JRE) 7. See Installing the JRE on RHEL-based systems. Python 2.6+ (needed if installing OpsCenter). About this task The packaged releases create a cassandra user. When starting Cassandra as a service, the service runs as this user. The following utilities are included in a separate package: sstable2json, sstablelevelreset, sstablemetadata, json2sstable, sstablerepairedset, sstablesplit, and token-generator. Procedure In a terminal window: 1. Check which version of Java is installed by running the following command: $ java -version Use the latest version of Oracle Java 7 on all nodes. 2. Add the DataStax Community repository to the /etc/yum.repos.d/datastax.repo: [datastax] name = DataStax Repo for Apache Cassandra baseurl = http://rpm.datastax.com/community enabled = 1 gpgcheck = 0 3. Install the packages: $ sudo yum install dsc21 $ sudo yum install cassandra21-tools ## Installs optional utilities. The DataStax Community distribution of Cassandra is ready for configuration. What to do next • • • • • • 32 Initializing a multiple node cluster (single data center) Initializing a multiple node cluster (multiple data centers) Recommended production settings Installing OpsCenter Key components for configuring Cassandra Starting Cassandra as a service Installing DataStax Community • Package installation directories Installing DataStax Community on Debian-based systems Install using APT repositories on Debian and Ubuntu. For a complete list of supported platforms, see DataStax Community – Supported Platforms. Before you begin • • • • Advanced Package Tool is installed. Root or sudo access to the install machine. Python 2.6+ (needed if installing OpsCenter). Latest version of Oracle Java SE Runtime Environment (JRE) 7. See Installing the JRE on Debianbased systems. About this task The packaged releases create a cassandra user. When starting Cassandra as a service, the service runs as this user. The following utilities are included in a separate package: sstable2json, sstablelevelreset, sstablemetadata, json2sstable, sstablerepairedset, sstablesplit, and token-generator. Procedure In a terminal window: 1. Check which version of Java is installed by running the following command: $ java -version Use the latest version of Oracle Java 7 on all nodes. 2. Add the DataStax Community repository to the /etc/apt/sources.list.d/ cassandra.sources.list $ echo "deb http://debian.datastax.com/community stable main" | sudo tee a /etc/apt/sources.list.d/cassandra.sources.list 3. Debian systems only: a) In /etc/apt/sources.list, find the line that describes your source repository for Debian and add contrib non-free to the end of the line. For example: deb http://some.debian.mirror/debian/ $distro main contrib non-free This allows installation of the Oracle JVM instead of the OpenJDK JVM. b) Save and close the file when you are done adding/editing your sources. 4. Add the DataStax repository key to your aptitude trusted keys. $ curl -L http://debian.datastax.com/debian/repo_key | sudo apt-key add 5. Install the latest package: $ sudo apt-get update $ sudo apt-get install dsc21 $ sudo apt-get install cassandra-tools ## Optional utilities Note: To install an earlier version of DataStax Community: $ sudo apt-get install dsc21=2.1.x-1 cassandra=2.1.x $ sudo apt-get install dsc21=2.1.x-1 cassandra=2.1.1 cassandratools=2.1.x ## Optional 33 Installing DataStax Community This installs the DataStax Community distribution of Cassandra. . 6. Because the Debian packages start the Cassandra service automatically, you must stop the server and clear the data: Doing this removes the default cluster_name (Test Cluster) from the system table. All nodes must use the same cluster name. $ sudo service cassandra stop $ sudo rm -rf /var/lib/cassandra/data/system/* The DataStax Community distribution of Cassandra is ready for configuration. What to do next • • • • • • • Initializing a multiple node cluster (single data center) Initializing a multiple node cluster (multiple data centers) Recommended production settings Installing OpsCenter Key components for configuring Cassandra Starting Cassandra as a service Package installation directories Installing DataStax Community on any Linux-based platform Install on all Linux-based platforms using a binary tarball. About this task Use this install for Mac OS X and platforms without package support, or if you do not have or want a root installation. For a complete list of supported platforms, see DataStax Community – Supported Platforms. Before you begin • • • Latest version of Oracle Java SE Runtime Environment (JRE) 7. See Installing the JRE. Python 2.6+ (needed if installing OpsCenter). If you are using an older RHEL-based Linux distribution, such as CentOS-5, you may see the following error: GLIBCXX_3.4.9 not found. You must replace the Snappy compression/decompression library (snappy-java-1.0.5.jar) with the snappy-java-1.0.4.1.jar. About this task The binary tarball runs as a stand-alone process. Procedure In a terminal window: 1. Check which version of Java is installed by running the following command: $ java -version Use the latest version of Oracle Java 7 on all nodes. 2. Download the DataStax Community: $ curl -L http://downloads.datastax.com/community/dsc.tar.gz | tar xz 34 Installing DataStax Community You can also download from Planet Cassandra. 3. Go to the install directory: $ cd dsc-cassandra-2.1.x The DataStax Community distribution of Cassandra is ready for configuration. 4. Go to the install directory: $ cd install_location/apache-cassandra-2.1.x Cassandra is ready for configuration. What to do next • • • • • • • Initializing a multiple node cluster (single data center) Initializing a multiple node cluster (multiple data centers) Recommended production settings Installing OpsCenter Key components for configuring Cassandra Tarball installation directories Starting Cassandra as a stand-alone process Installing DataStax Community on Windows systems About this task To install on Windows systems, see the Getting started guide. Installing on cloud providers Installing a Cassandra cluster on Amazon EC2 A step-by-step guide for installing the DataStax Community AMI (Amazon Machine Image). About this task The DataStax AMI allows you to set up a simple DataStax Community cluster using the Amazon Web Services EC2 Management Console. Installing via the AMI allows you to quickly deploy a Cassandra cluster within a single availability zone. The AMI does the following: • • • • • • • • • Installs the latest version of Cassandra with an Ubuntu 12.04 LTS (Precise Pangolin), image (Ubuntu Cloud 20140227 release), Kernel 3.8+. Installs Oracle Java 7. Install metrics tools such as dstat, ethtool, make, gcc, and s3cmd. Uses RAID0 ephemeral disks for data storage and commit logs. Choice of PV (Para-virtualization) or HVM (Hardware-assisted Virtual Machine) instance types. See Amazon documentation. Launches EBS-backed instances for faster start-up, not database storage. Uses the private interface for intra-cluster communication. Sets the seed nodes cluster-wide. Installs OpsCenter (by default). 35 Installing DataStax Community Note: When creating an EC2 cluster that spans multiple regions and availability zones, use OpsCenter to set up your cluster. See EC2 clusters spanning multiple regions and availability zones. Because Amazon changes the EC2 console intermittently, these instructions have been generalized. For details on each step, see the User guide in the Amazon Elastic Compute Cloud Documentation. To install a Cassandra cluster from the DataStax AMI, complete the following tasks: Creating an EC2 security group About this task An EC2 Security Group acts as a firewall that allows you to choose which protocols and ports are open in your cluster. You must specify a security group in the same region as your instances. You can specify the protocols and ports either by a range of IP addresses or by security group. To protect your cluster, you should define a security group. Be aware that specifying a Source IP of 0.0.0.0/0 allows every IP address access by the specified protocol and port range. Procedure If you need more help, click an informational icon or a link to the Amazon EC2 User Guide. 1. Sign in to the AWS console. 2. From the Amazon EC2 console navigation bar, select the same region as where you will launch the DataStax Community AMI. Step 1 in Launch instances provides a list of the available regions. 3. Open the Security Groups page. 4. Create a security group with a name and description of your choice, then save it. It is recommended that you include the region name in the description. Note: Creating and saving the securing group allows you to create rules based on the group. After the security group is saved it is available in the Source field drop-list. 5. Create rules for the security group using the following table: Table 1: Ports Port number Type Protocol Source Description Public ports 36 22 SSH TCP 0.0.0.0/0 SSH port 8888 Custom TCP Rule TCP 0.0.0.0/0 OpsCenter website. The opscenterd daemon listens on this port for HTTP requests coming directly from the browser. Installing DataStax Community Port number Type Protocol Source Description Cassandra inter-node ports 1024 65355 Custom TCP Rule TCP Your security group Cassandra 1.2 or earlier only. Because JMX connects on port 7199, handshakes, and then uses any port within the 1024+ range, use SSH to execute commands remotely to connect to JMX locally or use the DataStax OpsCenter. 7000 Custom TCP Rule TCP Your security group Cassandra inter-node cluster communication. 7001 Custom TCP Rule TCP Your security group Cassandra SSL inter-node cluster communication. 7199 Custom TCP Rule TCP Your security group Cassandra JMX monitoring port. Cassandra client ports 9042 Custom TCP Rule TCP 0.0.0.0/0 Cassandra client port. 9160 Custom TCP Rule TCP 0.0.0.0/0 Cassandra client port (Thrift). OpsCenter inter-node ports 61620 Custom TCP Rule TCP Your security group OpsCenter monitoring port. The opscenterd daemon listens on this port for TCP traffic coming from the agent. 61621 Custom TCP Rule TCP Your security group OpsCenter agent port. The agents listen on this port for SSL traffic initiated by OpsCenter. The completed port rules should look similar to this: Warning: The security configuration shown in this example opens up all externally accessible ports to incoming traffic from any IP address (0.0.0.0/0). The risk of data loss is high. If you desire a more secure configuration, see the Amazon EC2 help on security groups. 37 Installing DataStax Community Creating a key pair About this task Amazon EC2 uses public–key cryptography to encrypt and decrypt login information. Public–key cryptography uses a public key to encrypt data and the recipient uses the private key to decrypt the data. The public and private keys are known as a key pair. Procedure You must create a key pair for each region you use. 1. From the Amazon EC2 console navigation bar, select the same region as where you will launch the DataStax Community AMI. Step 1 in Launch instances provides a list of the available regions. 2. Create the key pair and save it to your home directory. 3. Set the permissions of your private key file so that only you can read it. $ chmod 400 my-key-pair.pem Launching the DataStax Community AMI About this task After creating the security group, you can launch your AMI instances. Procedure If you need more help, click an informational icon or a link to the Amazon EC2 User Guide. 1. Launch the AMI using the links in the following table: Amazon EC2 offers a number of geographic regions for launching the AMI. Factors for choosing a region include: reduce latency, cost, or regulatory requirements. Region AMI HVM instances (Hardware-assisted Virtual Machine - see Amazon documentation.) 38 us-east-1 ami-ada2b6c4 us-west-1 ami-3cf7c979 us-west-2 ami-1cff962c eu-west-1 ami-7f33cd08 ap-southeast-1 ami-b47828e6 ap-southeast-2 ami-55d54d6f Installing DataStax Community Region AMI ap-northeast-1 ami-714a3770 sa-east-1 ami-1dda7800 PV instances (Paravirtualization - see Amazon documentation. us-east-1 ami-f9a2b690 us-west-1 ami-32f7c977 us-west-2 ami-16ff9626 eu-west-1 ami-8932ccfe ap-southeast-1 ami-8c7828de ap-southeast-2 ami-57d54d6d ap-northeast-1 ami-6b4a376a sa-east-1 ami-15da7808 2. In Step 2: Choose an Instance Type, choose the appropriate type. The recommended instances are: • • • • • Development and light production: m3.large Moderate production: m3.xlarge SSD production with light data: c3.2xlarge Largest heavy production: m3.2xlarge (PV) or i2.2xlarge (HVM) Micro, small, and medium types are not supported. Note: The main difference between m1 and m3 instance types for use with Cassandra is that m3 instance types have faster, smaller SSD drives and m1 instance types have slower, larger rotational drives. Use m1 instance types when you have higher tolerance for latency SLAs and you require smaller cluster sizes, or both. For more aggressive workloads use m3 instance types with appropriately sized clusters. When the instance is selected, its specifications are displayed: Because Amazon updates instance types periodically, see the following docs to help you determine your hardware and storage requirements: • Planning a cluster deployment • User guide in the Amazon Elastic Compute Cloud Documentation • What is the story with AWS storage • Get in the Ring with Cassandra and EC2 3. Click Next: Configure Instance Details and configure the instances to suit your requirements: • • • Number of instances Network - Select Launch into EC2-Classic. Advanced Details - Open and add the following options (as text) to the User Data section. Option Description --clustername name Required. The name of the cluster. 39 Installing DataStax Community Option Description --totalnodes #_nodes Required. The total number of nodes in the cluster. --version community Required. The version of the cluster. Use community to install the latest version of DataStax Community. --opscenter [no] Optional. By default, DataStax OpsCenter is installed on the first instance. Specify no to disable. --reflector url Optional. Allows you to use your own reflector. Default: http:// reflector2.datastax.com/reflector2.php For example: --clustername myDSCcluster --totalnodes 6 --version community 4. Click Next: Add Storage, and add volumes as needed. The number of instance store devices available to the machine depends on the instance type. EBS volumes are not recommended for database storage. 5. Click Next: Tag Instance and give a name to your DSE instance, such as workload-dsc. Tags enable you to categorize your AWS resources in different ways, such as purpose, owner, or environment. 6. Click Next: Configure Security Group and configure as follows: a) Choose Select an existing security group. b) Select the Security Group you created earlier. c) Click Review and Launch. 7. On the Step 7: Review Instance Launch page, make any needed changes. 8. Click Launch and then in the Select an existing key pair or create a new key pair dialog, do one of the following: • • Select an existing key pair from the Select a key pair drop list. If you need to create a new key pair, click Choose an existing key pair drop list and select Create a new key pair. Then create the new key pair as described in Create key pair. 9. Click Launch Instances. The AMI image configures your cluster and starts Cassandra services. The Launch Status page is displayed. 10.Click View Instances. Connecting to your DataStax Community EC2 instance About this task Once the cluster is launched, you can connect to it from a terminal or SSH client, such as PuTTY. Connect as user ubuntu rather than as root. 40 Installing DataStax Community Procedure 1. If necessary, from the EC2 Dashboard, click Running Instances. You can connect to any node in the cluster. However, one node (Node0) runs OpsCenter and is the Cassandra seed node. 2. To find which instance is Node0: a) Select an instance. b) Select the Description tab. c) Scroll down the description information until you see AMI launch index. d) Repeat until you find Node0. 3. To get the public DNS name of a node, select the node you want to connect to, and then click Connect. 4. In Connect To Your Instance, select A standalone SSH client. 5. Copy the Example command line and change the user from root to ubuntu, then paste it into your SSH client. The AMI image configures your cluster and starts the Cassandra services. 6. After you have logged into a node and the AMI has completed installing and setting up the nodes, the status is displayed: 41 Installing DataStax Community The URL for the OpsCenter is displayed when you connect to the node containing it; otherwise it is not displayed. 7. If you installed OpsCenter, allow 60 to 90 seconds after the cluster has finished initializing for OpsCenter to start. You can launch OpsCenter using the URL: http://public_dns_of_first_instance:8888/ The Dashboard should show that the agents are connected. 8. If the agents have not automatically connected: a) Click the Fix link located near the top left of the Dashboard. b) When prompted for credentials for the agent nodes, use the username ubuntu and copy and paste the entire contents from your private key (.pem). The Dashboard shows the agents are connected. Expanding a Cassandra AMI cluster About this task The best way to expand your EC2 implementations is to use OpsCenter: • • • Provisioning a new cluster Adding an existing cluster Adding nodes to a cluster Installing and deploying a Cassandra cluster using GoGrid Installing and deploying a developer (3-node) or production (5-node) Cassandra cluster using GoGrid’s 1Button Deploy. About this task Additional introductory documentation is available from GoGrid at: 42 Installing DataStax Community • • GoGrid Cassandra Wiki Getting Started The 1-Button Deploy of Cassandra does the following: • • • • • • Installs the latest version of Cassandra on X-Large SSD Cloud Servers running Debian 7.2. Installs OpsCenter. Installs Oracle JDK 7. Installs Python Driver. Enables the Firewall Service - All services are blocked except SSH (22) and ping for public traffic. Deploys Cassandra using virtual nodes (vnodes). Procedure 1. Register with GoGrid. 2. Fill out the registration form and complete the account verification. 3. Access the management console with the login credentials you received in your email. Your cluster automatically starts deploying. A green status indicator shows that a server is up and running. Hover over any item to view its details or right-click to display a context menu. 4. Login to one of the servers and validate that the servers are configured and communicating: Note: You can login to any member of the cluster either with SSH, a third-party client (like PuTTY), or through the GoGrid Console service. a) To find your server credentials, right-click the server and select Passwords. b) From your secure connection client, login to the server with the proper credentials. For example from SSH: $ ssh root@ip_address c) Validate that the cluster is running: $ nodestool status Each node should be listed and it's status and state should be UN (Up Normal): 43 Installing DataStax Community Datacenter: datacenter1 ======================= Status=Up/Down |/ State=Normal/Leaving/Joining/Moving -- Address Load Tokens Owns (effective) Host ID Rack UN 10.110.94.2 71.46 KB 256 65.9% 3ed072d6-49cb-4713bd55-ea4de25576a9 rack1 UN 10.110.94.5 40.91 KB 256 66.7% d5d982bc-6e30-40a0-8fe7-e46d6622c1d5 rack1 UN 10.110.94.4 73.33 KB 256 67.4% f6c3bf08d9e5-43c8-85fa-5420db785052 rack1 What to do next The following provides information about using and configuring Cassandra, OpsCenter, GoGrid, and the Cassandra Query Language (CQL): • • • • About Apache Cassandra OpsCenter documentation GoGrid documentation CQL for Cassandra 2.x Installing the Oracle JRE Instructions for various platforms. Installing Oracle JRE on RHEL-based Systems About this task You must configure your operating system to use the Oracle JRE, not the OpenJDK. The latest 64-bit version of Java 7 is recommended. The minimum supported version is 1.7.0_25. Note: After installing the JRE, you may need to set JAVA_HOME to your profile: For shell or bash: export JAVA_HOME=path_to_java_home For csh (C shell): setenv JAVA_HOME=path_to_java_home Procedure 1. Check which version of the JRE your system is using: $ java -version If Oracle Java is used, the results should look like: java version "1.7.0_25" Java(TM) SE Runtime Environment (build 1.7.0_25-b15) Java HotSpot(TM) 64-Bit Server VM (build 23.25-b01, mixed mode) 2. If necessary, go to Oracle Java SE Downloads, accept the license agreement, and download the installer for your distribution. Note: If installing the Oracle JRE in a cloud environment, accept the license agreement, download the installer to your local client, and then use scp (secure copy) to transfer the file to your cloud machines. 3. From the directory where you downloaded the package, run the install: $ sudo rpm -ivh jre-7uversion-linux-x64.rpm The RPM installs the JRE into the /usr/java/ directory. 44 Installing DataStax Community 4. Use the alternatives command to add a symbolic link to the Oracle JRE installation so that your system uses the Oracle JRE instead of the OpenJDK JRE: $ sudo alternatives --install /usr/bin/java java /usr/java/jre1.7.0_version/ bin/java 200000 If you have any problems, set the PATH and JAVA_HOME variables: export PATH="$PATH:/usr/java/latest/bin" set JAVA_HOME=/usr/java/latest 5. Make sure your system is now using the correct JRE. For example: $ java -version java version "1.7.0_25" Java(TM) SE Runtime Environment (build 1.7.0_25-b15) Java HotSpot(TM) 64-Bit Server VM (build 23.25-b01, mixed mode) 6. If the OpenJDK JRE is still being used, use the alternatives command to switch it. For example: $ sudo alternatives --config java There are 2 programs which provide java. Selection Command -----------------------------------------------------------1 /usr/lib/jvm/jre-1.7.0-openjdk.x86_64/bin/java *+ 2 /usr/java/jre1.7.0_25/bin/java Enter to keep the current selection [+ ], or type selection number: Installing Oracle JRE on Debian or Ubuntu Systems About this task You must configure your operating system to use the Oracle JRE, not the OpenJDK. The latest 64-bit version of Java 7 is recommended. The minimum supported version is 1.7.0_25. Note: After installing the JRE, you may need to set JAVA_HOME to your profile: For shell or bash: export JAVA_HOME=path_to_java_home For csh (C shell): setenv JAVA_HOME=path_to_java_home About this task The Oracle Java Runtime Environment (JRE) has been removed from the official software repositories of Ubuntu and only provides a binary (.bin) version. You can get the JRE from the Java SE Downloads. Procedure 1. Check which version of the JRE your system is using: $ java -version If Oracle Java is used, the results should look like: java version "1.7.0_25" Java(TM) SE Runtime Environment (build 1.7.0_25-b15) Java HotSpot(TM) 64-Bit Server VM (build 23.25-b01, mixed mode) 2. If necessary, go to Oracle Java SE Downloads, accept the license agreement, and download the installer for your distribution. Note: If installing the Oracle JRE in a cloud environment, accept the license agreement, download the installer to your local client, and then use scp (secure copy) to transfer the file to your cloud machines. 45 Installing DataStax Community 3. Make a directory for the JRE: $ sudo mkdir -p /usr/lib/jvm 4. Unpack the tarball and install the JRE: $ sudo tar zxvf jre-7u25-linux-x64.tar.gz -C /usr/lib/jvm The JRE files are installed into a directory called /usr/lib/jvm/jre-7u_version. 5. Tell the system that there's a new Java version available: $ sudo update-alternatives --install "/usr/bin/java" "java" "/usr/lib/jvm/ jre1.7.0_version/bin/java" 1 If updating from a previous version that was removed manually, execute the above command twice, because you'll get an error message the first time. 6. Set the new JRE as the default: $ sudo update-alternatives --set java /usr/lib/jvm/jre1.7.0_version/bin/java 7. Make sure your system is now using the correct JRE. For example: $ java -version java version "1.7.0_25" Java(TM) SE Runtime Environment (build 1.7.0_25-b15) Java HotSpot(TM) 64-Bit Server VM (build 23.25-b01, mixed mode) Recommended production settings Recommendations for production environments; adjust them accordingly for your implementation. Disable zone_reclaim_mode on NUMA systems The Linux kernel can be inconsistent in enabling/disabling zone_reclaim_mode. This can result in odd performance problems. To ensure that zone_reclaim_mode is disabled: $ echo 0 > /proc/sys/vm/zone_reclaim_mode For more information, see Peculiar Linux kernel performance problem on NUMA systems. User resource limits You can view the current limits using the ulimit -a command. Although limits can also be temporarily set using this command, DataStax recommends making the changes permanent: Packaged installs: Ensure that the following settings are included in the /etc/security/limits.d/ cassandra.conf file: cassandra cassandra cassandra cassandra - memlock unlimited nofile 100000 nproc 32768 as unlimited Tarball installs: Ensure that the following settings are included in the /etc/security/limits.conf file: * * * * - memlock unlimited nofile 100000 nproc 32768 as unlimited If you run Cassandra as root, some Linux distributions such as Ubuntu, require setting the limits for root explicitly instead of using *: root - memlock unlimited 46 Installing DataStax Community root - nofile 100000 root - nproc 32768 root - as unlimited For CentOS, RHEL, OEL systems, also set the nproc limits in /etc/security/limits.d/90nproc.conf: * - nproc 32768 For all installations, add the following line to /etc/sysctl.conf: vm.max_map_count = 131072 To make the changes take effect, reboot the server or run the following command: $ sudo sysctl -p To confirm the limits are applied to the Cassandra process, run the following command where pid is the process ID of the currently running Cassandra process: $ cat /proc/<pid>/limits For more information, see Insufficient user resource limits errors. Disable swap You must disable swap entirely. Failure to do so can severely lower performance. Because Cassandra has multiple replicas and transparent failover, it is preferable for a replica to be killed immediately when memory is low rather than go into swap. This allows traffic to be immediately redirected to a functioning replica instead of continuing to hit the replica that has high latency due to swapping. If your system has a lot of DRAM, swapping still lowers performance significantly because the OS swaps out executable code so that more DRAM is available for caching disks. If you insist on using swap, you can set vm.swappiness=1. This allows the kernel swap out the absolute least used parts. $ sudo swapoff --all To make this change permanent, remove all swap file entries from /etc/fstab. For more information, see Nodes seem to freeze after some period of time. Synchronize clocks The clocks on all nodes should be synchronized. You can use NTP (Network Time Protocol) or other methods. This is required because columns are only overwritten if the timestamp in the new version of the column is more recent than the existing column. Optimum blockdev --setra settings for RAID Typically, a readahead of 128 is recommended, especially on Amazon EC2 RAID0 devices. Check to ensure setra is not set to 65536: $ sudo blockdev --report /dev/<device> To set setra: $ sudo blockdev --setra 128 /dev/<device> 47 Installing DataStax Community Java Virtual Machine The latest 64-bit version of Java 7 is recommended, not the OpenJDK. 48 Initializing a cluster Initializing a cluster Initializing a multiple node cluster (single data center) You can initialize a Cassandra cluster with a single data center. About this task If you're new to Cassandra, and haven't set up a cluster, see the Getting Started guide or 10 Minute Cassandra Walkthrough. Before you begin Each node must be correctly configured before starting the cluster. You must determine or perform the following before starting the cluster: • • • • • • • • A good understanding of how Cassandra works. Be sure to read at least Understanding the architecture, Data replication, and Cassandra's rack feature. Install Cassandra on each node. Choose a name for the cluster. Get the IP address of each node. Determine which nodes will be seed nodes. Do not make all nodes seed nodes. Please read Internode communications (gossip). Determine the snitch and replication strategy. The GossipingPropertyFileSnitch and NetworkTopologyStrategy are recommended for production environments. If using multiple data centers, determine a naming convention for each data center and rack, for example: DC1, DC2 or 100, 200 and RAC1, RAC2 or R101, R102. Choose the name carefully; renaming a data center is not possible. Other possible configuration settings are described in The cassandra.yaml configuration file and property files such as cassandra-rackdc.properties. About this task This example describes installing a 6 node cluster spanning 2 racks in a single data center. Each node is configured to use the GossipingPropertyFileSnitch and 256 virtual nodes (vnodes). In Cassandra, the term data center is a grouping of nodes. Data center is synonymous with replication group, that is, a grouping of nodes configured together for replication purposes. Procedure 1. Suppose you install Cassandra on these nodes: node0 node1 node2 node3 node4 node5 110.82.155.0 (seed1) 110.82.155.1 110.82.155.2 110.82.156.3 (seed2) 110.82.156.4 110.82.156.5 Note: It is a best practice to have more than one seed node per data center. 2. If you have a firewall running in your cluster, you must open certain ports for communication between the nodes. See Configuring firewall port access. 3. If Cassandra is running, you must stop the server and clear the data: 49 Initializing a cluster Doing this removes the default cluster_name (Test Cluster) from the system table. All nodes must use the same cluster name. Package installations: a) Stop Cassandra: $ sudo service cassandra stop b) Clear the data: $ sudo rm -rf /var/lib/cassandra/data/system/* Tarball installations: a) Stop Cassandra: $ ps auwx | grep cassandra $ sudo kill pid b) Clear the data: $ sudo rm -rf /var/lib/cassandra/data/system/* 4. Set the properties in the cassandra.yaml file for each node: • • Package installations: /etc/cassandra/conf/cassandra.yaml Tarball installations: install_location/conf/cassandra.yaml Note: After making any changes in the cassandra.yaml file, you must restart the node for the changes to take effect. Properties to set: • • num_tokens: recommended value: 256 -seeds: internal IP address of each seed node • Seed nodes do not bootstrap, which is the process of a new node joining an existing cluster. For new clusters, the bootstrap process on seed nodes is skipped. listen_address: • • If not set, Cassandra asks the system for the local address, the one associated with its hostname. In some cases Cassandra doesn't produce the correct address and you must specify the listen_address. endpoint_snitch: name of snitch (See endpoint_snitch.) If you are changing snitches, see Switching snitches. auto_bootstrap: false (Add this setting only when initializing a fresh cluster with no data.) Note: If the nodes in the cluster are identical in terms of disk layout, shared libraries, and so on, you can use the same copy of the cassandra.yaml file on all of them. Example: cluster_name: 'MyCassandraCluster' num_tokens: 256 seed_provider: - class_name: org.apache.cassandra.locator.SimpleSeedProvider parameters: - seeds: "110.82.155.0,110.82.155.3" listen_address: rpc_address: 0.0.0.0 endpoint_snitch: GossipingPropertyFileSnitch 5. In the cassandra-rackdc.properties file, assign the data center and rack names you determined in the Prerequisites. For example: # indicate the rack and dc for this node dc=DC1 50 Initializing a cluster rack=RAC1 6. After you have installed and configured Cassandra on all nodes, start the seed nodes one at a time, and then start the rest of the nodes. Note: If the node has restarted because of automatic restart, you must first stop the node and clear the data directories, as described above. Package installations: $ sudo service cassandra start Tarball installations: $ cd install_location $ bin/cassandra 7. To check that the ring is up and running, run: Package installations: $ nodetool status Tarball installations: $ cd install_location $ bin/nodetool status Each node should be listed and it's status and state should be UN (Up Normal). Initializing a multiple node cluster (multiple data centers) You can initialize a Cassandra cluster with multiple data centers. About this task If you're new to Cassandra, and haven't set up a cluster, see the Getting Started guide or 10 Minute Cassandra Walkthrough. This example describes installing a six node cluster spanning two data centers. Each node is configured to use the GossipingPropertyFileSnitch (multiple rack aware) and 256 virtual nodes (vnodes). In Cassandra, the term data center is a grouping of nodes. Data center is synonymous with replication group, that is, a grouping of nodes configured together for replication purposes. Before you begin Each node must be correctly configured before starting the cluster. You must determine or perform the following before starting the cluster: • • A good understanding of how Cassandra works. Be sure to read at least Understanding the architecture, Data replication, and Cassandra's rack feature. Install Cassandra on each node. 51 Initializing a cluster • • • • • • Choose a name for the cluster. Get the IP address of each node. Determine which nodes will be seed nodes. Do not make all nodes seed nodes. Please read Internode communications (gossip). Determine the snitch and replication strategy. The GossipingPropertyFileSnitch and NetworkTopologyStrategy are recommended for production environments. If using multiple data centers, determine a naming convention for each data center and rack, for example: DC1, DC2 or 100, 200 and RAC1, RAC2 or R101, R102. Choose the name carefully; renaming a data center is not possible. Other possible configuration settings are described in The cassandra.yaml configuration file and property files such as cassandra-rackdc.properties. Procedure 1. Suppose you install Cassandra on these nodes: node0 node1 node2 node3 node4 node5 10.168.66.41 (seed1) 10.176.43.66 10.168.247.41 10.176.170.59 (seed2) 10.169.61.170 10.169.30.138 Note: It is a best practice to have more than one seed node per data center. 2. If you have a firewall running in your cluster, you must open certain ports for communication between the nodes. See Configuring firewall port access. 3. If Cassandra is running, you must stop the server and clear the data: Doing this removes the default cluster_name (Test Cluster) from the system table. All nodes must use the same cluster name. Package installations: a) Stop Cassandra: $ sudo service cassandra stop b) Clear the data: $ sudo rm -rf /var/lib/cassandra/data/system/* Tarball installations: a) Stop Cassandra: $ ps auwx | grep cassandra $ sudo kill pid b) Clear the data: $ sudo rm -rf /var/lib/cassandra/data/system/* 4. Set the properties in the cassandra.yaml file for each node: • • Package installations: /etc/cassandra/conf/cassandra.yaml Tarball installations: install_location/conf/cassandra.yaml Note: After making any changes in the cassandra.yaml file, you must restart the node for the changes to take effect. Properties to set: • • 52 num_tokens: recommended value: 256 -seeds: internal IP address of each seed node Initializing a cluster • • • Seed nodes do not bootstrap, which is the process of a new node joining an existing cluster. For new clusters, the bootstrap process on seed nodes is skipped. listen_address: If not set, Cassandra asks the system for the local address, the one associated with its hostname. In some cases Cassandra doesn't produce the correct address and you must specify the listen_address. endpoint_snitch: name of snitch (See endpoint_snitch.) If you are changing snitches, see Switching snitches. auto_bootstrap: false (Add this setting only when initializing a fresh cluster with no data.) Note: If the nodes in the cluster are identical in terms of disk layout, shared libraries, and so on, you can use the same copy of the cassandra.yaml file on all of them. Example: cluster_name: 'MyCassandraCluster' num_tokens: 256 seed_provider: - class_name: org.apache.cassandra.locator.SimpleSeedProvider parameters: - seeds: "10.168.66.41,10.176.170.59" listen_address: endpoint_snitch: GossipingPropertyFileSnitch Note: Include at least one node from each data center. 5. In the cassandra-rackdc.properties file, assign the data center and rack names you determined in the Prerequisites. For example: Nodes 0 to 2 # indicate the rack and dc for this node dc=DC1 rack=RAC1 Nodes 3 to 5 # indicate the rack and dc for this node dc=DC2 rack=RAC1 6. After you have installed and configured Cassandra on all nodes, start the seed nodes one at a time, and then start the rest of the nodes. Note: If the node has restarted because of automatic restart, you must first stop the node and clear the data directories, as described above. Package installations: $ sudo service cassandra start Tarball installations: $ cd install_location $ bin/cassandra 7. To check that the ring is up and running, run: Package installations: $ nodetool status Tarball installations: $ cd install_location 53 Initializing a cluster $ bin/nodetool status Each node should be listed and it's status and state should be UN (Up Normal). 54 Security Security Securing Cassandra Cassandra provides these security features to the open source community. • Client-to-node encryption • Cassandra includes an optional, secure form of communication from a client machine to a database cluster. Client to server SSL ensures data in flight is not compromised and is securely transferred back/ forth from client machines. Authentication based on internally controlled login accounts/passwords • Administrators can create users who can be authenticated to Cassandra database clusters using the CREATE USER command. Internally, Cassandra manages user accounts and access to the database cluster using passwords. User accounts may be altered and dropped using the Cassandra Query Language (CQL). Object permission management Once authenticated into a database cluster using either internal authentication, the next security issue to be tackled is permission management. What can the user do inside the database? Authorization capabilities for Cassandra use the familiar GRANT/REVOKE security paradigm to manage object permissions. SSL encryption Client-to-node encryption Client-to-node encryption protects data in flight from client machines to a database cluster using SSL (Secure Sockets Layer). It establishes a secure channel between the client and the coordinator node. Before you begin All nodes must have all the relevant SSL certificates on all nodes. See Preparing server certificates. About this task To enable client-to-node SSL, you must set the client_encryption_options in the cassandra.yaml file. Procedure On each node under client_encryption_options: • Enable encryption. • Set the appropriate paths to your .keystore and .truststore files. • Provide the required passwords. The passwords must match the passwords used when generating the keystore and truststore. • To enable client certificate authentication, set require_client_auth to true. (Available starting with Cassandra 1.2.3.) Example client_encryption_options: enabled: true keystore: conf/.keystore ## The path to your .keystore file 55 Security keystore_password: <keystore password> ## The password you used when generating the keystore. truststore: conf/.truststore truststore_password: <truststore password> require_client_auth: <true or false> Node-to-node encryption Node-to-node encryption protects data transferred between nodes in a cluster, including gossip communications, using SSL (Secure Sockets Layer). Before you begin All nodes must have all the relevant SSL certificates on all nodes. See Preparing server certificates. About this task To enable node-to-node SSL, you must set the server_encryption_options in the cassandra.yaml file. Procedure On each node under sever_encryption_options: • Enable internode_encryption. The available options are: • • • • all • none • dc: Cassandra encrypts the traffic between the data centers. • rack: Cassandra encrypts the traffic between the racks. Set the appropriate paths to your .keystore and .truststore files. Provide the required passwords. The passwords must match the passwords used when generating the keystore and truststore. To enable client certificate authentication, set require_client_auth to true. (Available starting with Cassandra 1.2.3.) Example server_encryption_options: internode_encryption: <internode_option> keystore: resources/dse/conf/.keystore keystore_password: <keystore password> truststore: resources/dse/conf/.truststore truststore_password: <truststore password> require_client_auth: <true or false> Using cqlsh with SSL encryption About this task Using a cqlshrc file means you don't have to override the SSL_CERTFILE environmental variables every time. Procedure 1. To run cqlsh with SSL encryption, create a .cassandra/cqlshrc file in your home or client program directory. Sample files are available in the following directories: 56 Security • Package installations: /etc/cassandra • Tarball installations: install_location/conf 2. Start cqlsh with the --ssl option. $ cqlsh --ssl ## Package installations $ install_location/bin/cqlsh -ssl ## Tarball installations Example [authentication] username = fred password = !!bang!!$ [connection] hostname = 127.0.0.1 port = 9042 [ssl] certfile = ~/keys/cassandra.cert validate = true ## Optional, true by default userkey = ~/key.pem ## Provide when require_client_auth=true usercert = ~/cert.pem ## Provide when require_client_auth=true [certfiles] ## Optional section, overrides the default certfile in the [ssl] section 192.168.1.3 = ~/keys/cassandra01.cert 192.168.1.4 = ~/keys/cassandra02.cert Note: When validate is enabled, the host in the certificate is compared to the host of the machine that it is connected to. The SSL certificate must be provided either in the configuration file or as an environment variable. The environment variables (SSL_CERTFILE and SSL_VALIDATE) override any options set in this file. Preparing server certificates Generate SSL certificates for client-to-node encryption or node-to-node encryption. About this task If you generate the certificates for one type of encryption, you do not need to generate them again for the other: the same certificates are used for both. All nodes must have all the relevant SSL certificates on all nodes. A keystore contains private keys. The truststore contains SSL certificates for each node and doesn't require signing by a trusted and recognized public certification authority. Procedure 1. Generate the private and public key pair for the nodes of the cluster. A prompt for the new keystore and key password appears. 2. Leave key password the same as the keystore password. 3. Repeat steps 1 and 2 on each node using a different alias for each one. keytool -genkey -keyalg RSA -alias <cassandra_node0> -keystore .keystore 4. Export the public part of the certificate to a separate file and copy these certificates to all other nodes. keytool -export -alias cassandra -file cassandranode0.cer keystore .keystore 57 Security 5. Add the certificate of each node to the truststore of each node, so nodes can verify the identity of other nodes. keytool -import -v -trustcacerts -alias <cassandra_node0> -file <cassandra_node0>.cer -keystore .truststore keytool -import -v -trustcacerts -alias <cassandra_node1> -file <cassandra_node1>.cer -keystore .truststore . . . 6. Distribute the .keystore and .truststore files to all Cassandra nodes. 7. Make sure .keystore is readable only to the Cassandra daemon and not by any user of the system. Adding new trusted users Add new users when client certificate authentication is enabled. Before you begin The client certificate authentication must be enabled (require_client_auth=true). Procedure 1. Generate the certificate as described in Client-to-node encryption. 2. Import the user's certificate into every node's truststore using keytool: keytool -import -v -trustcacerts -alias <username> -file <certificate file> -keystore .truststore Internal authentication Internal authentication Like object permission management using internal authorization, internal authentication is based on Cassandra-controlled login accounts and passwords. Internal authentication works for the following clients when you provide a user name and password to start up the client: • • • • • • Astyanax cassandra-cli cqlsh DataStax drivers - produced and certified by DataStax to work with Cassandra. Hector pycassa Internal authentication stores usernames and bcrypt-hashed passwords in the system_auth.credentials table. PasswordAuthenticator is an IAuthenticator implementation that you can use to configure Cassandra for internal authentication out-of-the-box. Configuring authentication About this task To configure Cassandra to use internal authentication, first make a change to the cassandra.yaml file and increase the replication factor of the system_auth keyspace, as described in this procedure. Next, start up Cassandra using the default user name and password (cassandra/cassandra), and start cqlsh using the same credentials. Finally, use these CQL statements to set up user accounts to authorize users to access the database objects: • 58 ALTER USER Security • • • CREATE USER DROP USER LIST USERS Note: To configure authorization, see Configuring internal authorization. Procedure 1. Change the authenticator option in the cassandra.yaml file to PasswordAuthenticator. By default, the authenticator option is set to AllowAllAuthenticator. authenticator: PasswordAuthenticator 2. Increase the replication factor for the system_auth keyspace to N (number of nodes). If you use the default, 1, and the node with the lone replica goes down, you will not be able to log into the cluster because the system_auth keyspace was not replicated. 3. Restart the Cassandra client. The default superuser name and password that you use to start the client is stored in Cassandra. <client startup string> -u cassandra -p cassandra 4. Start cqlsh using the superuser name and password. ./cqlsh -u cassandra -p cassandra 5. Create another superuser, not named cassandra. This step is optional but highly recommended. 6. Log in as that new superuser. 7. Change the cassandra user password to something long and incomprehensible, and then forget about it. It won't be used again. 8. Take away the cassandra user's superuser status. 9. Use the CQL statements listed previously to set up user accounts and then grant permissions to access the database objects. Logging in using cqlsh About this task Typically, after configuring authentication, you log into cqlsh using the -u and -p options to the cqlsh command. To avoid having enter credentials every time you launch cqlsh, you can create a cqlshrc file in the .cassandra directory, which is in your home directory. When present, this file passes default login information to cqlsh. Procedure 1. Open a text editor and create a file that specifies a user name and password. [authentication] username = fred password = !!bang!!$ 2. Save the file in your home/.cassandra directory and name it cqlshrc. 3. Set permissions on the file. To protect database login information, ensure that the file is secure from unauthorized access. Note: Sample cqlshrc files are available in: • Packaged installations • /usr/share/doc/dse-libcassandra Binary installations install_location/conf 59 Security Internal authorization Object permissions You use familiar relational database GRANT/REVOKE paradigm to grant or revoke permissions to access Cassandra data. A superuser grants initial permissions, and subsequently a user may or may not be given the permission to grant/revoke permissions. Object permission management is based on internal authorization. Read access to these system tables is implicitly given to every authenticated user because the tables are used by most Cassandra tools: • • • • • system.schema_keyspace system.schema_columns system.schema_columnfamilies system.local system.peers Configuring internal authorization About this task CassandraAuthorizer is one of many possible IAuthorizer implementations, and the one that stores permissions in the system_auth.permissions table to support all authorization-related CQL statements. Configuration consists mainly of changing the authorizer option in the cassandra.yaml to use the CassandraAuthorizer. Note: To configure authentication, see Configuring authentication. Procedure 1. In the cassandra.yaml file, comment out the default AllowAllAuthorizer and add the CassandraAuthorizer. authorizer: CassandraAuthorizer You can use any authenticator except AllowAll. 2. Configure the replication factor for the system_auth keyspace to increase the replication factor to a number greater than 1. 3. Adjust the validity period for permissions caching by setting the permissions_validity_in_ms option in the cassandra.yaml file. Alternatively, disable permission caching by setting this option to 0. Results CQL supports these authorization statements: • • • 60 GRANT LIST PERMISSIONS REVOKE Security Configuring firewall port access Which ports to open when nodes are protected by a firewall. If you have a firewall running on the nodes in your Cassandra cluster, you must open up the following ports to allow communication between the nodes, including certain Cassandra ports. If this isn’t done, when you start Cassandra on a node, the node acts as a standalone database server rather than joining the database cluster. Table 2: Public ports Port Description number 22 SSH port 8888 OpsCenter website. The opscenterd daemon listens on this port for HTTP requests coming directly from the browser. Table 3: Cassandra inter-node ports Port Description number 7000 Cassandra inter-node cluster communication. 7001 Cassandra SSL inter-node cluster communication. 7199 Cassandra JMX monitoring port. Table 4: Cassandra client ports Port Description number 9042 Cassandra client port. 9160 Cassandra client port (Thrift). Table 5: Cassandra OpsCenter ports Port Description number 61620 OpsCenter monitoring port. The opscenterd daemon listens on this port for TCP traffic coming from the agent. 61621 OpsCenter agent port. The agents listen on this port for SSL traffic initiated by OpsCenter. 61 Database internals Database internals Storage engine Cassandra uses a storage structure similar to a Log-Structured Merge Tree, unlike a typical relational database that uses a B-Tree. Cassandra avoids reading before writing. Read-before-write, especially in a large distributed system, can produce stalls in read performance and other problems. For example, two clients read at the same time, one overwrites the row to make update A, and then the other overwrites the row to make update B, removing update A. Reading before writing also corrupts caches and increases IO requirements. To avoid a read-before-write condition, the storage engine groups inserts/updates to be made, and sequentially writes only the updated parts of a row in append mode. Cassandra never re-writes or re-reads existing data, and never overwrites the rows in place. A log-structured engine that avoids overwrites and uses sequential IO to update data is essential for writing to hard disks (HDD) and solid-state disks (SSD). On HDD, writing randomly involves a higher number of seek operations than sequential writing. The seek penalty incurred can be substantial. Using sequential IO, and thereby avoiding write amplification and disk failure, Cassandra accommodates inexpensive, consumer SSDs extremely well. Separate table directories Cassandra provides fine-grained control of table storage on disk, writing tables to disk using separate directories for each table. From the installation directory, data files are stored using this directory and file naming format on default tarball installations: /data/data/ks1/cf1-5be396077b811e3a3ab9dc4b9ac088d/ks1-cf1-hc-1-Data.db On packaged installations, the data files are stored in the same format, but in /var/lib/cassandra/ data by default. In this example, ks1 represents the keyspace name to distinguish the keyspace for streaming or bulk loading data. A hexadecimal string, 5be396077b811e3a3ab9dc4b9ac088d in this example, is appended to table names to represent unique table IDs. Cassandra creates a subdirectory for each table, which allows you to symlink a table to a chosen physical drive or data volume. This provides the capability to move very active tables to faster media, such as SSD’s for better performance, and also divvy up tables across all attached storage devices for better I/O balance at the storage layer. Cassandra storage basics To manage and access data in Cassandra, it is important to understand how Casssandra stores data. The hinted handoff feature and Cassandra conformance and non-conformance to the ACID (atomic, consistent, isolated, durable) database properties are key concepts in this discussion. In Cassandra, consistency refers to how up-to-date and synchronized a row of data is on all of its replicas. Client utilities and application programming interfaces (APIs) for developing applications for data storage and retrieval are available. The write path to compaction Cassandra processes data at several stages on the write path, starting with the immediate logging of a write and ending in compaction: 62 Database internals • • • • • Logging data in the commit log Writing data to the memtable Flushing data from the memtable Storing data on disk in SSTables Compaction Logging writes and memtable storage When a write occurs, Cassandra stores the data in a structure in memory, the memtable, and also appends writes to the commit log on disk, providing configurable durability. The commit log receives every write made to a Cassandra node, and these durable writes survive permanently even after power failure. The memtable is a write-back cache of data partitions that Cassandra looks up by key. The memtable stores writes until reaching a limit, and then is flushed. Flushing data from the memtable When memtable contents exceed a configurable threshold, the memtable data, which includes indexes, is put in a queue to be flushed to disk. You can configure the length of the queue by changing memtable_flush_queue_size in the cassandra.yaml. If the data to be flushed exceeds the queue size, Cassandra blocks writes until the next flush succeeds. You can manually flush a table using the nodetool flush command. Typically, before restarting nodes, flushing the memtable is recommended to reduce commit log replay time. To flush the data, Cassandra sorts memtables by token and then writes the data to disk sequentially. Storing data on disk in SSTables Data in the commit log is purged after its corresponding data in the memtable is flushed to an SSTable. Memtables and SSTables are maintained per table. SSTables are immutable, not written to again after the memtable is flushed. Consequently, a partition is typically stored across multiple SSTable files. For each SSTable, Cassandra creates these structures: • Partition index • A list of partition keys and the start position of rows in the data file (on disk) Partition summary (in memory) • A sample of the partition index. Bloom filter 63 Database internals Compaction Periodic compaction is essential to a healthy Cassandra database because Cassandra does not insert/ update in place. As inserts/updates occur, instead of overwriting the rows, Cassandra writes a new timestamped version of the inserted or updated data in another SSTable. Cassandra manages the accumulation of SSTables on disk using compaction. Cassandra also does not delete in place because the SSTable is immutable. Instead, Cassandra marks data to be deleted using a tombstone. Tombstones exist for a configured time period defined by the gc_grace_seconds value set on the table. During compaction, there is a temporary spike in disk space usage and disk I/O because the old and new SSTables co-exist. This diagram depicts the compaction process: Compaction merges the data in each SSTable by partition key, selecting the latest data for storage based on its timestamp. Cassandra can merge the data performantly, without random IO, because rows are sorted by partition key within each SSTable. After evicting tombstones and removing deleted data, columns, and rows, the compaction process consolidates SSTables into a single file. The old SSTable files are deleted as soon as any pending reads finish using the files. Disk space occupied by old SSTables becomes available for reuse. Cassandra 2.1 improves read performance after compaction by performing an incremental replacement of compacted SSTables. Instead of waiting for the entire compaction to finish and then throwing away the old SSTable (and cache), Cassandra can read data directly from the new SSTable even before it finishes writing. As data is written to the new SSTable and reads are directed to it, the corresponding data in the old SSTables is no longer accessed and is evicted from the page cache. Thus begins an incremental process of caching the new SSTable, while directing reads away from the old one. The dramatic cache miss is gone. Cassandra provides predictable high performance even under heavy load. 64 Database internals Starting compaction You can configure these types of compaction to run periodically: • SizeTieredCompactionStrategy • For write-intensive workloads LeveledCompactionStrategy • For read-intensive workloads DateTieredCompactionStrategy For time series data and expiring (TTL) data You can manually start compaction using the nodetool compact command. For more information about compaction strategies, see When to Use Leveled Compaction and Leveled Compaction in Apache Cassandra. How Cassandra stores and distributes indexes Internally, a Cassandra index is a data partition. In the example of a music service, the playlists table includes an artist column and uses a compound partition key: id is the partition key and song_order is the clustering column. CREATE TABLE playlists ( id uuid, song_order int, . . . artist text, PRIMARY KEY (id, song_order ) ); As shown in the music service example, to filter the data based on the artist, create an index on artist. Cassandra uses the index to pull out the records in question. An attempt to filter the data before creating the index will fail because the operation would be very inefficient. A sequential scan across the entire playlists dataset would be required. After creating the artist index, Cassandra can filter the data in the playlists table by artist, such as Fu Manchu. The partition is the unit of replication in Cassandra. In the music service example, partitions are distributed by hashing the playlist id and using the ring to locate the nodes that store the distributed data. Cassandra would generally store playlist information on different nodes, and to find all the songs by Fu Manchu, Cassandra would have to visit different nodes. To avoid these problems, each node indexes its own data. This technique, however, does not guarantee trouble-free indexing, so know when and when not to use an index. About index updates As with relational databases, keeping indexes up to date is not free, so unnecessary indexes should be avoided. When a column is updated, the index is updated as well. If the old column value was still in the memtable, which typically occurs when updating a small set of rows repeatedly, Cassandra removes the corresponding obsolete index entry; otherwise, the old entry remains to be purged by compaction. If a read sees a stale index entry before compaction purges it, the reader thread invalidates it. The write path of an update Inserting a duplicate primary key is treated as an upsert. Eventually, the updates are streamed to disk using sequential I/O and stored in a new SSTable. During an update, Cassandra time-stamps and writes columns to disk using the write path. During the update, if multiple versions of the column exist in the memtable, Cassandra flushes only the newer version of the column to disk, as described in the Compaction section. 65 Database internals About deletes The way Cassandra deletes data differs from the way a relational database deletes data. A relational database might spend time scanning through data looking for expired data and throwing it away or an administrator might have to partition expired data by month, for example, to clear it out faster. Data in a Cassandra column can have an optional expiration date called TTL (time to live). Use CQL to set the TTL in seconds for data. Cassandra marks TTL data with a tombstone after the requested amount of time has expired. A tombstone exists for gc_grace_seconds. After data is marked with a tombstone, the data is automatically removed during the normal compaction process. Facts about deleted data to keep in mind are: • • • Cassandra does not immediately remove data marked for deletion from disk. The deletion occurs during compaction. If you use the size-tiered or date-tiered compaction strategy, you can drop data immediately by manually starting the compaction process. Before doing so, understand the documented disadvantages of the process. Deleted data can reappear if you do not run node repair routinely. Why deleted data can reappear Marking data with a tombstone signals Cassandra to retry sending a delete request to a replica that was down at the time of delete. If the replica comes back up within the grace period of time, it eventually receives the delete request. However, if a node is down longer than the grace period, the node can miss the delete because the tombstone disappears after gc_grace_seconds. Cassandra always attempts to replay missed updates when the node comes back up again. After a failure, it is a best practice to run node repair to repair inconsistencies across all of the replicas when bringing a node back into the cluster. If the node doesn't come back within gc_grace,_seconds, remove the node, wipe it, and bootstrap it again. About hinted handoff writes Hinted handoff is a Cassandra feature that optimizes the cluster consistency process and anti-entropy when a replica-owning node is not available, due to network issues or other problems, to accept a replica from a successful write operation. Hinted handoff is not a process that guarantees successful write operations, except when a client application uses a consistency level of ANY. You enable or disable hinted handoff in the cassandra.yaml file. How hinted handoff works During a write operation, when hinted handoff is enabled and consistency can be met, the coordinator stores a hint about dead replicas in the local system.hints table under either of these conditions: • • A replica node for the row is known to be down ahead of time. A replica node does not respond to the write request. When the cluster cannot meet the consistency level specified by the client, Cassandra does not store a hint. A hint indicates that a write needs to be replayed to one or more unavailable nodes. The hint consists of: • • • The location of the replica that is down Version metadata The actual data being written By default, hints are saved for three hours after a replica fails because if the replica is down longer than that, it is likely permanently dead. You can configure this interval of time using the max_hint_window_in_ms property in the cassandra.yaml file. If the node recovers after the save time has elapsed, run a repair to re-replicate the data written during the down time. 66 Database internals After a node discovers from gossip that a node for which it holds hints has recovered, the node sends the data row corresponding to each hint to the target. Additionally, the node checks every ten minutes for any hints for writes that timed out during an outage too brief for the failure detector to notice through gossip. For example, in a cluster of two nodes, A and B, having a replication factor (RF) of 1, each row is stored on one node. Suppose node A is down while we write row K to it with consistency level of one. The write fails because reads always reflect the most recent write when: W + R > replication factor where W is the number of nodes to block for writes and R is the number of nodes to block for reads. Cassandra does not write a hint to B and call the write good because Cassandra cannot read the data at any consistency level until A comes back up and B forwards the data to A. In a cluster of three nodes, A (the coordinator), B, and C, each row is stored on two nodes in a keyspace having a replication factor of 2. Suppose node C goes down. The client writes row K to node A. The coordinator, replicates row K to node B, and writes the hint for downed node C to node A. Cassandra, configured with a consistency level of ONE, calls the write good because Cassandra can read the data on node B. When node C comes back up, node A reacts to the hint by forwarding the data to node C. For more information about how hinted handoff works, see "Modern hinted handoff" by Jonathan Ellis. Extreme write availability For applications that want Cassandra to accept writes even when all the normal replicas are down, when not even consistency level ONE can be satisfied, Cassandra provides consistency level ANY. ANY guarantees that the write is durable and will be readable after an appropriate replica target becomes available and receives the hint replay. Performance By design, hinted handoff inherently forces Cassandra to continue performing the same number of writes even when the cluster is operating at reduced capacity. Pushing your cluster to maximum capacity with no allowance for failures is a bad idea. 67 Database internals Hinted handoff is designed to minimize the extra load on the cluster. All hints for a given replica are stored under a single partition key, so replaying hints is a simple sequential read with minimal performance impact. If a replica node is overloaded or unavailable, and the failure detector has not yet marked it down, then expect most or all writes to that node to fail after the timeout triggered by write_request_timeout_in_ms, which defaults to 10 seconds. If this happens on many nodes at once this could become substantial memory pressure on the coordinator. So the coordinator tracks how many hints it is currently writing, and if this number gets too high it will temporarily refuse writes (withOverloadedException) whose replicas include the misbehaving nodes. Removal of hints When removing a node from the cluster by decommissioning the node or by using the nodetool removenode command, Cassandra automatically removes hints targeting the node that no longer exists. Cassandra also removes hints for dropped tables. Scheduling repair weekly At first glance, it seems that hinted handoff eliminates the need for repair, but this is not true because hardware failure is inevitable and has the following ramifications: • • Loss of the historical data necessary to tell the rest of the cluster exactly what data is missing. Loss of hints-not-yet-replayed from requests that the failed node coordinated. About reads Cassandra must combine results from the active memtable and potentially mutliple SSTables to satisfy a read. First, Cassandra checks the Bloom filter. Each SSTable has a Bloom filter associated with it that checks the probability of having any data for the requested partition in the SSTable before doing any disk I/O. If the Bloom filter does not rule out the SSTable, Cassandra checks the partition key cache and takes one of these courses of action: • If an index entry is found in the cache: • • Cassandra goes to the compression offset map to find the compressed block having the data. • Fetches the compressed data on disk and returns the result set. If an index entry is not found in the cache: • • • • 68 Cassandra searches the partition summary to determine the approximate location on disk of the index entry. Next, to fetch the index entry, Cassandra hits the disk for the first time, performing a single seek and a sequential read of columns (a range read) in the SSTable if the columns are contiguous. Cassandra goes to the compression offset map to find the compressed block having the data. Fetches the compressed data on disk and returns the result set. Database internals How off-heap components affect reads To increase the data handling capacity per node, Cassandra keeps these components off-heap: • • • Bloom filter Compression offsets map Partition summary Of the components in memory, only the partition key cache is a fixed size. Other components grow as the data set grows. Bloom filter The Bloom filter grows to approximately 1-2 GB per billion partitions. In the extreme case, you can have one partition per row, so you can easily have billions of these entries on a single machine. The Bloom filter is tunable if you want to trade memory for performance. Partition summary By default, the partition summary is a sample of the partition index. You configure sample frequency by changing the index_interval property in the table definition, also if you want to trade memory for performance. Compression offsets The compression offset map grows to 1-3 GB per terabyte compressed. The more you compress data, the greater number of compressed blocks you have and the larger the compression offset table. Compression is enabled by default even though going through the compression offset map consumes CPU resources. Having compression enabled makes the page cache more effective, and typically, almost always pays off. 69 Database internals Reading from a partition Within a partition, all rows are not equally expensive to query. The very beginning of the partition—the first rows, clustered by your key definition—is slightly less expensive to query because there is no need to consult the partition-level index. How write patterns affect reads The type of compaction strategy Cassandra performs on your data is configurable and can significantly affect read performance. Using the SizeTieredCompactionStrategy or DateTieredCompactionStrategy tends to cause data fragmentation when rows are frequently updated. The LeveledCompactionStrategy (LCS) was designed to prevent fragmentation under this condition. For more information about LCS, see the article, Leveled Compaction in Apache Cassandra. How the row cache affects reads Typical of any database, reads are fastest when the most in-demand data (or hot working set) fits into memory. Although all modern storage systems rely on some form of caching to allow for fast access to hot data, not all of them degrade gracefully when the cache capacity is exceeded and disk I/O is required. Cassandra's read performance benefits from built-in caching, shown in the following diagram. The red lines in the SSTables in this diagram are fragments of a row that Cassandra needs to combine to give the user the requested results. Cassandra caches the merged value, not the raw row fragments. That saves some CPU and disk I/O. The row cache is not write-through. If a write comes in for the row, the cache for it is invalidated and is not cached again until it is read. For rows that are accessed frequently, Cassandra 2.1 has improved the built-in partition key cache and an optional row cache. About transactions and concurrency control Cassandra does not use RDBMS ACID transactions with rollback or locking mechanisms, but instead offers atomic, isolated, and durable transactions with eventual/tunable consistency that lets the user decide how strong or eventual they want each transaction’s consistency to be. • Atomic • Everything in a transaction succeeds or the entire transaction is rolled back. Consistent A transaction cannot leave the database in an inconsistent state. 70 Database internals • Isolated • Transactions cannot interfere with each other. Durable Completed transactions persist in the event of crashes or server failure. As a non-relational database, Cassandra does not support joins or foreign keys, and consequently does not offer consistency in the ACID sense. For example, when moving money from account A to B the total in the accounts does not change. Cassandra supports atomicity and isolation at the row-level, but trades transactional isolation and atomicity for high availability and fast write performance. Cassandra writes are durable. Lightweight transactions Lightweight transactions, also known as compare and set, with linearizable consistency ensure a transaction isolation level similar to the serializable level offered by RDBMS’s. You use lightweight transactions instead of durable transactions with eventual/tunable consistency for situations the require nodes in the distributed system to agree on changes to data. For example, two users attempting to create a unique user account in the same cluster could overwrite each other’s work. Using a lightweight transaction, the nodes can agree to create only one account. Cassandra implements lightweight transactions by extending the Paxos consensus protocol, which is based on a quorum-based algorithm. Using this protocol, a distributed system can agree on proposed data additions/modifications without the need for a master database or two-phase commit. You use extensions in CQL for lightweight transactions. You can use an IF clause in a number of CQL statements, such as INSERT, for lightweight transactions. For example, to ensure that an insert into a new accounts table is unique for a new customer, use the IF NOT EXISTS clause: INSERT INTO customer_account (customerID, customer_email) VALUES (‘LauraS’, ‘[email protected]’) IF NOT EXISTS; DML modifications you make using UPDATE can also make use of the IF clause by comparing one or more columns to various values: UPDATE customer_account SET customer_email=’[email protected]’ IF customerID=’LauraS’; Cassandra 2.1.1 and later support non-equal conditions for lightweight transactions. You can use <, <=, >, >=, != and IN operators in WHERE clauses to query lightweight tables. Behind the scenes, Cassandra is making four round trips between a node proposing a lightweight transaction and any needed replicas in the cluster to ensure proper execution so performance is affected. Consequently, reserve lightweight transactions for those situations where they are absolutely necessary; Cassandra’s normal eventual consistency can be used for everything else. A SERIAL consistency level allows reading the current (and possibly uncommitted) state of data without proposing a new addition or update. If a SERIAL read finds an uncommitted transaction in progress, Cassandra performs a read repair as part of the commit. Atomicity In Cassandra, a write is atomic at the partition-level, meaning inserting or updating columns in a row is treated as one write operation. A delete operation is also performed atomically. By default, all operations in a batch are performed atomically. Cassandra uses a batch log to ensure all operations in a batch are applied atomically. There is a performance penalty for batch atomicity when a batch spans multiple partitions. If you do not want to incur this penalty, use the UNLOGGED option. Using UNLOGGED makes the batch operation atomic only within a single partition. 71 Database internals For example, if using a write consistency level of QUORUM with a replication factor of 3, Cassandra will replicate the write to all nodes in the cluster and wait for acknowledgement from two nodes. If the write fails on one of the nodes but succeeds on the other, Cassandra reports a failure to replicate the write on that node. However, the replicated write that succeeds on the other node is not automatically rolled back. Cassandra uses timestamps to determine the most recent update to a column. The timestamp is provided by the client application. The latest timestamp always wins when requesting data, so if multiple client sessions update the same columns in a row concurrently, the most recent update is the one that will be seen by readers. Consistency Cassandra offers two types of consistency: • Tunable consistency • Availability and consistency can be tuned, and can be strong in the CAP sense--data is made consistent across all the nodes in a distributed database cluster. Linearizable consistency In ACID terms, linearizable consistency is a serial (immediate) isolation level for lightweight transactions. In Cassandra, there are no locking or transactional dependencies when concurrently updating multiple rows or tables. Tuning availability and consistency always gives you partition tolerance. A user can pick and choose on a per operation basis how many nodes must receive a DML command or respond to a SELECT query. For in-depth information about this new consistency level, see the article, Lightweight transactions in Cassandra. To support linearizable consistency, a consistency level of SERIAL has been added to Cassandra. Additions to CQL have been made to support lightweight transactions. Isolation In early versions of Cassandra, it was possible to see partial updates in a row when one user was updating the row while another user was reading that same row. For example, if one user was writing a row with two thousand columns, another user could potentially read that same row and see some of the columns, but not all of them if the write was still in progress. Full row-level isolation is in place, which means that writes to a row are isolated to the client performing the write and are not visible to any other user until they are complete. Delete operations are performed in isolation. All updates in a batch operation belonging to a given partition key are performed in isolation. Durability Writes in Cassandra are durable. All writes to a replica node are recorded both in memory and in a commit log on disk before they are acknowledged as a success. If a crash or server failure occurs before the memtables are flushed to disk, the commit log is replayed on restart to recover any lost writes. In addition to the local durability (data immediately written to disk), the replication of data on other nodes strengthens durability. You can manage the local durability to suit your needs for consistency using the commitlog_sync option in the cassandra.yaml file. Set the option to either periodic or batch. 72 Database internals About data consistency Consistency refers to how up-to-date and synchronized a row of Cassandra data is on all of its replicas. Cassandra extends the concept of eventual consistency by offering tunable consistency. For any given read or write operation, the client application decides how consistent the requested data must be. A tutorial in the CQL documentation compares consistency levels using cqlsh tracing. Even at low consistency levels, Cassandra writes to all replicas of the partition key, even replicas in other data centers. The consistency level determines only the number of replicas that need to acknowledge the write success to the client application. Typically, a client specifies a consistency level that is less than the replication factor specified by the keyspace. This practice ensures that the coordinating server node reports the write successful even if some replicas are down or otherwise not responsive to the write. The read consistency level specifies how many replicas must respond to a read request before returning data to the client application. Cassandra checks the specified number of replicas for data to satisfy the read request. About built-in consistency repair features You can use these built-in repair utilities to ensure that data remains consistent across replicas. • • • Read repair Hinted handoff Anti-entropy node repair Configuring data consistency Consistency levels in Cassandra can be configured to manage availability versus data accuracy. You can configure consistency on a cluster, data center, or individual I/O operation basis. Consistency among participating nodes can be set globally and also controlled on a per-operation basis (for example insert or update) using Cassandra’s drivers and client libraries. Write consistency levels This table describes the write consistency levels in strongest-to-weakest order. Table 6: Write Consistency Levels Level Description Usage ALL A write must be written to the commit log and memtable on all replica nodes in the cluster for that partition. Provides the highest consistency and the lowest availability of any other level. EACH_QUORUM Strong consistency. A write must be written to the commit log and memtable on a quorum of replica nodes in all data centers. Used in multiple data center clusters to strictly maintain consistency at the same level in each data center. For example, choose this level if you want a read to fail when a data center is down and the QUORUM cannot be reached on that data center. QUORUM A write must be written to the commit log and memtable on a quorum of replica nodes. Provides strong consistency if you can tolerate some level of failure. 73 Database internals 74 Level Description Usage LOCAL_QUORUM Strong consistency. A write must be written to the commit log and memtable on a quorum of replica nodes in the same data center as the coordinator node. Avoids latency of inter-data center communication. Used in multiple data center clusters with a rack-aware replica placement strategy ( NetworkTopologyStrategy) and a properly configured snitch. Fails when using SimpleStrategy. Use to maintain consistency locally (within the single data center). ONE A write must be written to the commit log and memtable of at least one replica node. Satisfies the needs of most users because consistency requirements are not stringent. TWO A write must be written to the commit log and memtable of at least two replica nodes. Similar to ONE. THREE A write must be written to the commit log and memtable of at least three replica nodes. Similar to TWO. LOCAL_ONE A write must be sent to, and successfully acknowledged by, at least one replica node in the local datacenter. In a multiple data center clusters, a consistency level of ONE is often desirable, but crossDC traffic is not. LOCAL_ONE accomplishes this. For security and quality reasons, you can use this consistency level in an offline datacenter to prevent automatic connection to online nodes in other data centers if an offline node goes down. ANY A write must be written to at least one node. If all replica nodes for the given partition key are down, the write can still succeed after a hinted handoff has been written. If all replica nodes are down at write time, an ANY write is not readable until the replica nodes for that partition have recovered. Provides low latency and a guarantee that a write never fails. Delivers the lowest consistency and highest availability. SERIAL Achieves linearizable consistency You cannot configure this level for lightweight transactions by as a normal consistency level, preventing unconditional updates. configured at the driver level using the consistency level field. You configure this level using the serial consistency field as part of the native protocol operation. See failure scenarios. LOCAL_SERIAL Same as SERIAL but confined to Same as SERIAL. Used for the data center. A write must be disaster recovery. See failure written conditionally to the commit scenarios. log and memtable on a quorum Database internals Level Description Usage of replica nodes in the same data center. SERIAL and LOCAL_SERIAL write failure scenarios If one of three nodes is down, the Paxos commit fails under the following conditions: • • • CQL query-configured consistency level of ALL Driver-configured serial consistency level of SERIAL Replication factor of 3 A WriteTimeout with a WriteType of CAS occurs and further reads do not see the write. If the node goes down in the middle of the operation instead of before the operation started, the write is committed, the value is written to the live nodes, and a WriteTimeout with a WriteType of SIMPLE occurs. Under the same conditions, if two of the nodes are down at the beginning of the operation, the Paxos commit fails and nothing is committed. If the two nodes go down after the Paxos proposal is accepted, the write is committed to the remaining live nodes and written there, but a WriteTimeout with WriteType SIMPLE is returned. Read consistency levels This table describes read consistency levels in strongest-to-weakest order. Table 7: Read Consistency Levels Level Description Usage ALL Returns the record after all replicas have responded. The read operation will fail if a replica does not respond. Provides the highest consistency of all levels and the lowest availability of all levels. EACH_QUORUM Returns the record after a quorum Same as LOCAL_QUORUM of replicas in each data center of the cluster has responded. QUORUM Returns the record after a quorum Ensures strong consistency if you of replicas has responded from can tolerate some level of failure. any data center. LOCAL_QUORUM Returns the record after a quorum of replicas in the current data center as the coordinator node has reported. Avoids latency of inter-data center communication. Used in multiple data center clusters with a rack-aware replica placement strategy ( NetworkTopologyStrategy) and a properly configured snitch. Fails when using SimpleStrategy. ONE Returns a response from the closest replica, as determined by the snitch. By default, a read repair runs in the background to make the other replicas consistent. Provides the highest availability of all the levels if you can tolerate a comparatively high probability of stale data being read. The replicas contacted for reads may not always have the most recent write. 75 Database internals Level Description Usage TWO Returns the most recent data from two of the closest replicas. Similar to ONE. THREE Returns the most recent data from three of the closest replicas. Similar to TWO. LOCAL_ONE Returns a response from the closest replica in the local data center. Same usage as described in the table about write consistency levels. SERIAL Allows reading the current (and possibly uncommitted) state of data without proposing a new addition or update. If a SERIAL read finds an uncommitted transaction in progress, it will commit the transaction as part of the read. Similar to QUORUM. To read the latest value of a column after a user has invoked a lightweight transaction to write to the column, use SERIAL. Cassandra then checks the inflight lightweight transaction for updates and, if found, returns the latest data. LOCAL_SERIAL Same as SERIAL, but confined to the data center. Similar to LOCAL_QUORUM. Used to achieve linearizable consistency for lightweight transactions. About the QUORUM levels The QUORUM level writes to the number of nodes that make up a quorum. A quorum is calculated, and then rounded down to a whole number, as follows: quorum = (sum_of_replication_factors / 2) + 1 The sum of all the replication_factor settings for each data center is the sum_of_replication_factors. sum_of_replication_factors = datacenter1_RF + datacenter2_RF + . . . + datacentern_RF Examples: • • • • Using a replication factor of 3, a quorum is 2 nodes. The cluster can tolerate 1 replica down. Using a replication factor of 6, a quorum is 4. The cluster can tolerate 2 replicas down. In a two data center cluster where each data center has a replication factor of 3, a quorum is 4 nodes. The cluster can tolerate 2 replica nodes down. In a five data center cluster where two data centers have a replication factor of 3 and three data centers have a replication factor of 2, a quorum is 6 nodes. The more data centers, the higher number of replica nodes need to respond for a successful operation. If consistency is a top priority, you can ensure that a read always reflects the most recent write by using the following formula: (nodes_written + nodes_read) > replication_factor For example, if your application is using the QUORUM consistency level for both write and read operations and you are using a replication factor of 3, then this ensures that 2 nodes are always written and 2 nodes are always read. The combination of nodes written and read (4) being greater than the replication factor (3) ensures strong read consistency. Similar to QUORUM, the LOCAL_QUORUM level is calculated based on the replication factor of the same data center as the coordinator node. That is, even if the cluster has more than one data center, the quorum is calculated only with local replica nodes. 76 Database internals In EACH_QUORUM, every data center in the cluster must reach a quorum based on that data center's replication factor in order for the read or write request to succeed. That is, for every data center in the cluster a quorum of replica nodes must respond to the coordinator node in order for the read or write request to succeed. Configuring client consistency levels You can use a new cqlsh command, CONSISTENCY, to set the consistency level for the keyspace. The WITH CONSISTENCY clause has been removed from CQL commands. You set the consistency level programmatically (at the driver level). For example, call QueryBuilder.insertInto with a setConsistencyLevel argument. The consistency level defaults to ONE for all write and read operations. Read requests There are three types of read requests that a coordinator can send to a replica: • • • A direct read request A digest request A background read repair request The coordinator node contacts one replica node with a direct read request. Then the coordinator sends a digest request to a number of replicas determined by the consistency level specified by the client. The digest request checks the data in the replica node to make sure it is up to date. Then the coordinator sends a digest request to all remaining replicas. If any replica nodes have out of date data, a background read repair request is sent. Read repair requests ensure that the requested row is made consistent on all replicas. For a digest request the coordinator first contacts the replicas specified by the consistency level. The coordinator sends these requests to the replicas that are currently responding the fastest. The nodes contacted respond with a digest of the requested data; if multiple nodes are contacted, the rows from each replica are compared in memory to see if they are consistent. If they are not, then the replica that has the most recent data (based on the timestamp) is used by the coordinator to forward the result back to the client. To ensure that all replicas have the most recent version of frequently-read data, the coordinator also contacts and compares the data from all the remaining replicas that own the row in the background. If the replicas are inconsistent, the coordinator issues writes to the out-of-date replicas to update the row to the most recent values. This process is known as read repair. Read repair can be configured per table for non-QUORUM consistency levels (using read_repair_chance), and is enabled by default. For illustrated examples of read requests, see the examples of read consistency levels. Rapid read protection using speculative_retry Rapid read protection allows Cassandra to still deliver read requests when the originally selected replica nodes are either down or taking too long to respond. If the table has been configured with the speculative_retry property, the coordinator node for the read request will retry the request with another replica node if the original replica node exceeds a configurable timeout value to complete the read request. 77 Database internals Recovering from replica node failure with rapid read protection R1 replica node failed 1 12 2 R2 3 11 Client 4 10 coodinator node resends after tim eout 9 5 R3 Coordinat or node 8 Chosen node 6 7 Examples of read consistency levels The following diagrams show examples of read requests using these consistency levels: • • • • • • QUORUM in a single data center ONE in a single data center QUORUM in two data centers LOCAL_QUORUM in two data centers ONE in two data centers LOCAL_ONE in two data centers Rapid read protection diagram shows how the speculative retry table property affects consistency. A single data center cluster with a consistency level of QUORUM In a single data center cluster with a replication factor of 3, and a read consistency level of QUORUM, 2 of the 3 replicas for the given row must respond to fulfill the read request. If the contacted replicas have different versions of the row, the replica with the most recent version will return the requested data. In the background, the third replica is checked for consistency with the first two, and if needed, a read repair is initiated for the out-of-date replicas. Single data center cluster with 3 replica nodes and consistency set to QUORUM R1 1 12 2 R2 3 11 Client 4 10 Coordinat or node 5 9 Chosen node R3 Read response Read repair 8 6 7 A single data center cluster with a consistency level of ONE In a single data center cluster with a replication factor of 3, and a read consistency level of ONE, the closest replica for the given row is contacted to fulfill the read request. In the background a read repair is potentially initiated, based on the read_repair_chance setting of the table, for the other replicas. 78 Database internals Single data center cluster with 3 replica nodes and consistency set to ONE R1 1 12 2 R2 3 11 Client 4 10 Coordinat or node 5 9 Chosen node R3 Read response 8 6 7 Read repair A two data center cluster with a consistency level of QUORUM In a two data center cluster with a replication factor of 3, and a read consistency of QUORUM, 4 replicas for the given row must resond to fulfill the read request. The 4 replicas can be from any data center. In the background, the remaining replicas are checked for consistency with the first four, and if needed, a read repair is initiated for the out-of-date replicas. Mult iple dat a cent er clust er wit h 3 replica nodes and consist ency set t o QUORUM R1 1 12 2 R2 3 11 Client Dat a Cent er Alpha 10 4 5 9 R3 8 6 7 1 12 2 R1 3 11 R2 Dat a Cent er Bet a 10 4 5 9 Coordinat or node Chosen node R3 8 6 7 Read response Read repair A two data center cluster with a consistency level of LOCAL_QUORUM In a multiple data center cluster with a replication factor of 3, and a read consistency of LOCAL_QUORUM, 2 replicas in the same data center as the coordinator node for the given row must respond to fulfill the read request. In the background, the remaining replicas are checked for consistency with the first 2, and if needed, a read repair is initiated for the out-of-date replicas. 79 Database internals Mult iple dat a cent er clust er wit h 3 replica nodes and consist ency set t o LOCAL_QUORUM R1 1 12 2 R2 3 11 Client Dat a Cent er Alpha 10 4 5 9 R3 8 6 7 1 12 2 R1 3 11 R2 Dat a Cent er Bet a 10 4 5 9 Coordinat or node R3 8 Chosen node 6 7 Read response Read repair A two data center cluster with a consistency level of ONE In a multiple data center cluster with a replication factor of 3, and a read consistency of ONE, the closest replica for the given row, regardless of data center, is contacted to fulfill the read request. In the background a read repair is potentially initiated, based on the read_repair_chance setting of the table, for the other replicas. Multiple data center cluster with 3 replica nodes and consistency set to ONE R1 1 12 2 R2 3 11 Client Data Center Alpha 10 4 5 9 R3 8 6 7 1 12 2 R1 3 11 R3 Data Center Beta 10 Coordinat or node 5 9 Chosen node Read response Read repair 80 4 R2 8 6 7 Database internals A two data center cluster with a consistency level of LOCAL_ONE In a multiple data center cluster with a replication factor of 3, and a read consistency of LOCAL_ONE, the closest replica for the given row in the same data center as the coodindator node is contacted to fulfill the read request. In the background a read repair is potentially initiated, based on the read_repair_chance setting of the table, for the other replicas. Multiple data center cluster with 3 replica nodes and consistency set to LOCAL_ONE R1 1 12 2 R2 3 11 Client Data Center Alpha 10 4 5 9 R3 8 6 7 1 12 2 R1 3 11 R3 Data Center Beta 10 Coordinat or node 4 5 9 Chosen node R2 Read response Read repair 8 6 7 Write requests The coordinator sends a write request to all replicas that own the row being written. As long as all replica nodes are up and available, they will get the write regardless of the consistency level specified by the client. The write consistency level determines how many replica nodes must respond with a success acknowledgment in order for the write to be considered successful. Success means that the data was written to the commit log and the memtable as described in About writes. For example, in a single data center 10 node cluster with a replication factor of 3, an incoming write will go to all 3 nodes that own the requested row. If the write consistency level specified by the client is ONE, the first node to complete the write responds back to the coordinator, which then proxies the success message back to the client. A consistency level of ONE means that it is possible that 2 of the 3 replicas could miss the write if they happened to be down at the time the request was made. If a replica misses a write, Cassandra will make the row consistent later using one of its built-in repair mechanisms: hinted handoff, read repair, or anti-entropy node repair. That node forwards the write to all replicas of that row. It responds back to the client once it receives a write acknowledgment from the number of nodes specified by the consistency level. 81 Database internals Single data center cluster with 3 replica nodes and consistency set to ONE R1 1 12 2 R2 3 11 Client 4 10 5 9 Coordinat or node R3 Chosen node 8 6 Writ e response 7 Multiple data center write requests In multiple data center deployments, Cassandra optimizes write performance by choosing one coordinator node. The coordinator node contacted by the client application forwards the write request to each replica node in each all the data centers. If using a consistency level of LOCAL_ONE or LOCAL_QUORUM, only the nodes in the same data center as the coordinator node must respond to the client request in order for the request to succeed. This way, geographical latency does not impact client request response times. Mult iple dat a cent er clust er wit h 3 replica nodes and consist ency set t o QUORUM R1 1 12 2 R2 3 11 Client Dat a Cent er Alpha 10 4 5 9 R3 8 6 7 1 12 2 R1 3 11 R2 Dat a Cent er Bet a 10 4 5 9 R3 Coordinat or node 8 6 7 Nodes t hat m ake up a quorum Writ e response 82 Configuration Configuration The cassandra.yaml configuration file The cassandra.yaml file is the main configuration file for Cassandra. Important: After changing properties in the cassandra.yaml file, you must restart the node for the changes to take effect. It is located in the following directories: • • • • Cassandra Package installations: /etc/cassandra/conf Cassandra Tarball installations: install_location/conf DataStax Enterprise Package installations: /etc/dse/cassandra DataStax Enterprise Tarball installations: install_location/resources/cassandra/conf The configuration properties are grouped into the following sections: • Quick start • The minimal properties needed for configuring a cluster. Commonly used • Properties most frequently used when configuring Cassandra. Performance tuning • Tuning performance and system resource utilization, including commit log, compaction, memory, disk I/ O, CPU, reads, and writes. Advanced • Properties for advanced users or properties that are less commonly used. Security Server and client security settings. note Note: Values with indicate default values that are defined internally, missing, commented out, or implementation depends on other properties in the cassandra.yaml file. Additionally, some commented out values may not match the actual default value; these values are recommended when changing from the default. Quick start properties The minimal properties needed for configuring a cluster. Related information: Initializing a multiple node cluster (single data center) and Initializing a multiple node cluster (multiple data centers). cluster_name (Default: Test Cluster) The name of the cluster. This setting prevents nodes in one logical cluster from joining another. All nodes in a cluster must have the same value. listen_address (Default: localhost) The IP address or hostname that Cassandra binds to for listening to other Cassandra nodes. If you do not know if or have your networking properly configured, it's best to use your private IP addresses. If you want your nodes to be able to communicate, you must change this setting: • • • Generally set to empty. If the node is properly configured (host name, name resolution, and so on), Cassandra uses InetAddress.getLocalHost() to get the local address from the system. For a single node cluster, you can use the default setting (localhost). If Cassandra can't find the correct address, you must specify the IP address or host name. 83 Configuration • Never specify 0.0.0.0; it is always wrong. Default directories If you have changed any of the default directories during installation, make sure you have root access and set these properties: commitlog_directory The directory where the commit log is stored. Default locations: • • Package installations: /var/lib/cassandra/commitlog Tarball installations: install_location/data/commitlog For optimal write performance, place the commit log be on a separate disk partition, or (ideally) a separate physical device from the data file directories. Because the commit log is append only, an HDD for is acceptable for this purpose. data_file_directories The directory location where table data (SSTables) is stored. Cassandra distributes data evenly across the location, subject to the granularity of the configured compaction strategy. Default locations: • • Package installations: /var/lib/cassandra/data Tarball installations: install_location/data/data As a production best practice, use RAID 0 and SSDs. saved_caches_directory The directory location where table key and row caches are stored. Default location: • • Package installations: /var/lib/cassandra/saved_caches Tarball installations: install_location/data/saved_caches Commonly used properties Properties most frequently used when configuring Cassandra. Before starting a node for the first time, you should carefully evaluate your requirements. Common initialization properties Note: Be sure to set the properties in the Quick start section as well. commit_failure_policy (Default: stop) Policy for commit disk failures: • • • • die: Shut down gossip and Thrift and kill the JVM, so the node can be replaced. stop: Shut down gossip and Thrift, leaving the node effectively dead, but can be inspected using JMX. stop_commit: Shut down the commit log, letting writes collect but continuing to service reads (as in pre-2.0.5 Cassandra). ignore: Ignore fatal errors and let the batches fail. disk_failure_policy (Default: stop) Sets how Cassandra responds to disk failure. Recommend settings are stop or best_effort. • • • • 84 die: Shut down gossip and Thrift and kill the JVM for any file system errors or single SSTable errors, so the node can be replaced. stop_paranoid: Shut down gossip and Thrift even for single SSTable errors. stop: Shut down gossip and Thrift, leaving the node effectively dead, but available for inspection using JMX. best_effort: Stop using the failed disk and respond to requests based on the remaining available SSTables. This means you will see obsolete data at consistency level of ONE. Configuration • ignore: Ignores fatal errors and lets the requests fail; all file system errors are logged but otherwise ignored. Cassandra acts as in versions prior to 1.2. Related information: Handling Disk Failures In Cassandra 1.2 blog endpoint_snitch (Default: org.apache.cassandra.locator.SimpleSnitch) Sets which snitch Cassandra uses for locating nodes and routing requests. It must be set to a class that implements IEndpointSnitch. For descriptions of the available snitches, see Snitches. Note: The GossipingPropertyFileSnitch is recommended for production. It defines a node's data center and rack and uses gossip for propagating this information to other nodes. rpc_address (Default: localhost) The listen address for client connections. Valid values are: • • • • 0.0.0.0: Listens on all configured interfaces. IP address hostname unset: Resolves the address using the hostname configuration of the node. If left unset, the hostname must resolve to the IP address of this node using /etc/hostname, /etc/hosts, or DNS. Related information: Network seed_provider The addresses of hosts deemed contact points. Cassandra nodes use the -seeds list to find each other and learn the topology of the ring. • • class_name (Default: org.apache.cassandra.locator.SimpleSeedProvider) The class within Cassandra that handles the seed logic. It can be customized, but this is typically not required. - seeds (Default: 127.0.0.1) A comma-delimited list of IP addresses used by gossip for bootstrapping new nodes joining a cluster. When running multiple nodes, you must change the list from the default value. In multiple data-center clusters, the seed list should include at least one node from each data center (replication group). More than a single seed node per data center is recommended for fault tolerance. Otherwise, gossip has to communicate with another data center when bootstraping a node. Making every node a seed node is not recommended because of increased maintenance and reduced performance. Related information: Initializing a multiple node cluster (single data center) and Initializing a multiple node cluster (multiple data centers). Common compaction settings compaction_throughput_mb_per_sec (Default: 16) Throttles compaction to the specified total throughput across the entire system. The faster you insert data, the faster you need to compact in order to keep the SSTable count down. The recommended Value is 16 to 32 times the rate of write throughput (in MB/second). Setting the value to 0 disables compaction throttling. Related information: Configuring compaction Common memtable settings memtable_total_space_in_mb note (Default: 1/4 of heap) Specifies the total memory used for all memtables on a node. This replaces the per-table storage settings memtable_operations_in_millions and memtable_throughput_in_mb. Related information: Tuning the Java heap Common disk settings concurrent_reads 85 Configuration (Default: 32) For workloads with more data than can fit in memory, the bottleneck is reads fetching data from disk. Setting to (16 × number_of_drives) allows operations to queue low enough in the stack so that the OS and drives can reorder them. concurrent_writes (Default: 32) Writes in Cassandra are rarely I/O bound, so the ideal number of concurrent writes depends on the number of CPU cores in your system. The recommended value is 8 × number_of_cpu_cores. Common automatic backup settings incremental_backups (Default: false) Backs up data updated since the last snapshot was taken. When enabled, Cassandra creates a hard link to each SSTable flushed or streamed locally in a backups/ subdirectory of the keyspace data. Removing these links is the operator's responsibility. Related information: Enabling incremental backups snapshot_before_compaction (Default: false) Enable or disable taking a snapshot before each compaction. This option is useful to back up data when there is a data format change. Be careful using this option because Cassandra does not clean up older snapshots automatically. Related information: Configuring compaction Common fault detection setting phi_convict_threshold note (Default: 8) Adjusts the sensitivity of the failure detector on an exponential scale. Lower values increase the likelihood that an unresponsive node will be marked as down, while higher values decrease the likelihood that transient failures will cause a node failure. In unstable network environments (such as EC2 at times), raising the value to 10 or 12 helps prevent false failures. Values higher than 12 and lower than 5 are not recommended. Related information: Failure detection and recovery Performance tuning properties Tuning performance and system resource utilization, including commit log, compaction, memory, disk I/O, CPU, reads, and writes. Commit log settings commitlog_sync (Default: periodic) The method that Cassandra uses to acknowledge writes in milliseconds: • • periodic: Used with commitlog_sync_period_in_ms (Default: 10000 milliseconds [10 seconds]) to control how often the commit log is synchronized to disk. Periodic syncs are acknowledged immediately. note batch: Used with commitlog_sync_batch_window_in_ms (Default: disabled) to control how long Cassandra waits for other writes before performing a sync. When using this method, writes are not acknowledged until fsynced to disk. Related information: Durability commitlog_periodic_queue_size (Default: 1024 × number_of_cpu_cores) pending entries on the commitlog queue). When writing very large blobs, reduce this number. For example, 16 × number_of_cpu_cores works reasonably well for 1MB blobs. This setting should be at least as large as the concurrent_writes setting. commitlog_segment_size_in_mb (Default: 32MB) Sets the size of the individual commitlog file segments. A commitlog segment may be archived, deleted, or recycled after all its data has been flushed to SSTables. This amount of data can 86 Configuration potentially include commitlog segments from every table in the system. The default size is usually suitable for most commitlog archiving, but if you want a finer granularity, 8 or 16 MB is reasonable. Related information: Commit log archive configuration commitlog_total_space_in_mb note (Default: 32MB for 32-bit JVMs, 1024MB for 64-bit JVMs) Total space used for commitlogs. If the used space goes above this value, Cassandra rounds up to the next nearest segment multiple and flushes memtables to disk for the oldest commitlog segments, removing those log segments. This reduces the amount of data to replay on start-up, and prevents infrequently-updated tables from indefinitely keeping commitlog segments. A small total commitlog space tends to cause more flush activity on less-active tables. Related information: Configuring memtable throughput Compaction settings Related information: Configuring compaction compaction_preheat_key_cache (Default: true) When set to true, cached row keys are tracked during compaction, and re-cached to their new positions in the compacted SSTable. If you have extremely large key caches for tables, set the value to false; see Global row and key caches properties. concurrent_compactors note (Default: 1 per CPU core) Sets the number of concurrent compaction processes allowed to run simultaneously on a node. Simultaneous compactions help preserve read performance in a mixed readwrite workload by mitigating the tendency of small SSTables to accumulate during a single long-running compaction. The acutal default (commented out value) is the smaller of (number of disks, number of cores), with a minimum of 2 and a maximum of 8. If your data directories are backed by SSD, increase this value to the number of cores. in_memory_compaction_limit_in_mb (Default: 64MB) Size limit for rows being compacted in memory. Larger rows spill to disk and use a slower two-pass compaction process. When this occurs, a message is logged specifying the row key. The recommended value is 5 to 10 percent of the available Java heap size. preheat_kernel_page_cache (Default: false) Enable or disable kernel page cache preheating from contents of the key cache after compaction. When enabled it preheats only first page (4KB) of each row to optimize for sequential access. It can be harmful for fat rows, see CASSANDRA-4937 for more details. sstable_preemptive_open_interval_in_mb (Default: 50MB) When compacting, the replacement opens SSTables before they are completely written and uses in place of the prior SSTables for any range previously written. This setting helps to smoothly transfer reads between the SSTables by reducing page cache churn and keeps hot rows hot. Memtable settings memtable_allocation_type (Default: heap_buffers) Specify the way Cassandra allocates and manages memtable memory. See Offheap memtables in Cassandra 2.1. Options are: • • • heap_buffers: On heap NIO (non-blocking I/O) buffers. offheap_buffers: Off heap(direct) NIO buffers. offheap_objects: Native memory, eliminating NIO buffer heap overhead. memtable_cleanup_threshold note (Default: 0.11 1/(memtable_flush_writers + 1)) Ratio of occupied non-flushing memtable size to total permitted size for triggering a flush of the largest memtable. Larger values mean larger flushes and less compaction, but also less concurrent flush activity. This can make it difficult to keep your disks saturated under heavy write load. 87 Configuration file_cache_size_in_mb (Default: smaller of 1/4 heap or 512) Total memory to use for SSTable-reading buffers. memtable_flush_queue_size (Default: 4) The number of full memtables to allow pending flush (memtables waiting for a write thread). At a minimum, set to the maximum number of indexes created on a single table. Related information: Flushing data from the memtable memtable_flush_writers note (Default: 1 per data directory) Sets the number of memtable flush writer threads. These threads are blocked by disk I/O, and each one holds a memtable in memory while blocked. If you have a large Java heap size and many data directories, you can increase the value for better flush performance. Cache and index settings column_index_size_in_kb (Default: 64) Add column indexes to a row when the data reaches this size. This value defines how much row data must be de-serialized to read the column. Increase this setting if your column values are large or if you have a very large number of columns. If consistently reading only a few columns from each row or doing many partial-row reads, keep it small. All index data is read for each access, so take that into consideration when setting the index size. index_summary_capacity_in_mb note (Default: empty) Fixed memory pool size in MB for SSTable index summaries. When no value is specified, uses 5% of the heap size. If the memory usage of all index summaries exceeds this limit, any SSTables with low read rates will shrink their index summaries to meet this limit. This is a best-effort process. In extreme conditions, Cassandra may need to use more than this amount of memory. index_summary_resize_interval_in_minutes (Default: 60) How frequently index summaries should be resampled. This is done periodically to redistribute memory from the fixed-size pool to SSTables proportional their recent read rates. To disable, set to -1. This leaves existing index summaries at their current sampling level. reduce_cache_capacity_to (Default: 0.6) Sets the size percentage to which maximum cache capacity is reduced when Java heap usage reaches the threshold defined by reduce_cache_sizes_at. reduce_cache_sizes_at (Default: 0.85) When Java heap usage (after a full concurrent mark sweep (CMS) garbage collection) exceeds this percentage, Cassandra reduces the cache capacity to the fraction of the current size as specified by reduce_cache_capacity_to. To disable, set the value to 1.0. Disks settings stream_throughput_outbound_megabits_per_sec note (Default: 200 seconds) Throttles all outbound streaming file transfers on a node to the specified throughput. Cassandra does mostly sequential I/O when streaming data during bootstrap or repair, which can lead to saturating the network connection and degrading client (RPC) performance. inter_dc_stream_throughput_outbound_megabits_per_sec note (Default: unset) Throttles all streaming file transfer between the data centers. This setting allows users to throttle inter data-center stream throughput in addition to throttling all network stream traffic using stream_throughput_outbound_megabits_per_sec. trickle_fsync (Default: false) When doing sequential writing, enabling this option tells fsync to force the operating system to flush the dirty buffers at a set interval trickle_fsync_interval_in_kb. Enable this parameter to avoid sudden dirty buffer flushing from impacting read latencies. Recommended to use on SSDs, but not on HDDs. trickle_fsync_interval_in_kb (Default: 10240]). Sets the size of the fsync in kilobytes. 88 Configuration Advanced properties Properties for advanced users or properties that are less commonly used. Advanced initialization properties auto_bootstrap (Default: true) This setting has been removed from default configuration. It makes new (non-seed) nodes automatically migrate the right data to themselves. When initializing a fresh cluster without data, add auto_bootstrap: false. Related information: Initializing a multiple node cluster (single data center) and Initializing a multiple node cluster (multiple data centers). batch_size_warn_threshold_in_kb (Default: 5KB per batch) Log WARN on any batch size exceeding this value in kilobytes. Caution should be taken on increasing the size of this threshold as it can lead to node instability. broadcast_address note (Default: listen_address) The IP address a node tells other nodes in the cluster to contact it by. It allows public and private address to be different. For example, use the broadcast_address parameter in topologies where not all nodes have access to other nodes by their private IP addresses. If your Cassandra cluster is deployed across multiple Amazon EC2 regions and you use the EC2MultiRegionSnitch, set the broadcast_address to public IP address of the node and the listen_address to the private IP. initial_token (Default: disabled) Used in the single-node-per-token architecture, where a node owns exactly one contiguous range in the ring space. Setting this property overrides num_tokens. If you not using vnodes or have num_tokens set it to 1 or unspecified (#num_tokens), you should always specify this parameter when setting up a production cluster for the first time and when adding capacity. For more information, see this parameter in the Cassandra 1.1 Node and Cluster Configuration documentation. This parameter can be used with num_tokens (vnodes ) in special cases such as Restoring from a Snapshot. num_tokens note (Default: 256) Defines the number of tokens randomly assigned to this node on the ring when using virtual nodes (vnodes). The more tokens, relative to other nodes, the larger the proportion of data that the node stores. Generally all nodes should have the same number of tokens assuming equal hardware capability. The recommended value is 256. If unspecified (#num_tokens), Cassandra uses 1 (equivalent to #num_tokens : 1) for legacy compatibility and uses the initial_token setting. If not using vnodes, comment #num_tokens : 256 or set num_tokens : 1 and use initial_token. If you already have an existing cluster with one token per node and wish to migrate to vnodes, see Enabling virtual nodes on an existing production cluster. Note: If using DataStax Enterprise, the default setting of this property depends on the type of node and type of install. partitioner (Default: org.apache.cassandra.dht.Murmur3Partitioner) Distributes rows (by partition key) across all nodes in the cluster. Any IPartitioner may be used, including your own as long as it is in the class path. For new clusters use the default partitioner. Cassandra provides the following partitioners for backwards compatibility: • • • RandomPartitioner ByteOrderedPartitioner OrderPreservingPartitioner (deprecated) Related information: Partitioners 89 Configuration storage_port (Default: 7000) The port for inter-node communication. Advanced automatic backup setting auto_snapshot (Default: true) Enable or disable whether a snapshot is taken of the data before keyspace truncation or dropping of tables. To prevent data loss, using the default setting is strongly advised. If you set to false, you will lose data on truncation or drop. Key caches and global row properties When creating or modifying tables, you enable or disable the key cache (partition key cache) or row cache for that table by setting the caching parameter. Other row and key cache tuning and configuration options are set at the global (node) level. Cassandra uses these settings to automatically distribute memory for each table on the node based on the overall workload and specific table usage. You can also configure the save periods for these caches globally. Related information: Configuring caches key_cache_keys_to_save note (Default: disabled - all keys are saved) Number of keys from the key cache to save. key_cache_save_period (Default: 14400 seconds [4 hours]) Duration in seconds that keys are saved in cache. Caches are saved to saved_caches_directory. Saved caches greatly improve cold-start speeds and has relatively little effect on I/O. key_cache_size_in_mb (Default: empty) A global cache setting for tables. It is the maximum size of the key cache in memory. When no value is set, the cache is set to the smaller of 5% of the available heap, or 100MB. To disable set to 0. Related information: setcachecapacity. row_cache_keys_to_save note (Default: disabled - all keys are saved) Number of keys from the row cache to save. row_cache_size_in_mb (Default: 0- disabled) Maximum size of the row cache in memory. Row cache can save more time than key_cache_size_in_mb, but is space-intensive because it contains the entire row. Use the row cache only for hot rows or static rows. If you reduce the size, you may not get you hottest keys loaded on startup. row_cache_save_period (Default: 0- disabled) Duration in seconds that rows are saved in cache. Caches are saved to saved_caches_directory. This setting has limited use as described in row_cache_size_in_mb. memory_allocator (Default: NativeAllocator) The off-heap memory allocator. In addition to caches, this property affects storage engine metadata. Supported values: • • NativeAllocator JEMallocAllocator - Experiments show that jemalloc saves some memory compared to the native allocator because it is more fragmentation resistant. To use, install jemalloc as a library and modify cassandra-env.sh (instructions in file). Counter caches properties Counter cache helps to reduce counter locks' contention for hot counter cells. In case of RF = 1 a counter cache hit will cause Cassandra to skip the read before write entirely. With RF > 1 a counter cache hit will still help to reduce the duration of the lock hold, helping with hot counter cell updates, but will not allow skipping the read entirely. Only the local (clock, count) tuple of a counter cell is kept in memory, not the whole counter, so it's relatively cheap. 90 Configuration Note: Reducing the size counter cache may result in not getting the hottest keys loaded on startup. counter_cache_size_in_mb note (Default value: empty) When no value is specified a minimum of 2.5% of Heap or 50MB. If you perform counter deletes and rely on low gc_grace_seconds, you should disable the counter cache. To disable, set to 0. counter_cache_save_period (Default: 7200 seconds [2 hours]) Duration after which Cassandra should save the counter cache (keys only). Caches are saved to saved_caches_directory. counter_cache_keys_to_save note (Default value: disabled) Number of keys from the counter cache to save. When disabled all keys are saved. Tombstone settings When executing a scan, within or across a partition, tombstones must be kept in memory to allow returning them to the coordinator. The coordinator uses them to ensure other replicas know about the deleted rows. Workloads that generate numerous tombstones may cause performance problems and exhaust the server heap. See Cassandra anti-patterns: Queues and queue-like datasets. Adjust these thresholds only if you understand the impact and want to scan more tombstones. Additionally, you can adjust these thresholds at runtime using the StorageServiceMBean. Related information: Cassandra anti-patterns: Queues and queue-like datasets tombstone_warn_threshold (Default: 1000) The maximum number of tombstones a query can scan before warning. tombstone_failure_threshold (Default: 100000) The maximum number of tombstones a query can scan before aborting. Network timeout settings range_request_timeout_in_ms (Default: 10000) The time in milliseconds that the coordinator waits for sequential or index scans to complete. read_request_timeout_in_ms (Default: 10000) The time in milliseconds that the coordinator waits for read operations to complete. counter_write_request_timeout_in_ms (Default: 5000) The time in milliseconds that the coordinator waits for counter writes to complete. cas_contention_timeout_in_ms (Default: 1000) The time in milliseconds that the coordinator continues to retry a CAS (compare and set) operation that contends with other proposals for the same row. truncate_request_timeout_in_ms (Default: 60000) The time in milliseconds that the coordinator waits for truncates to complete. The long default value allows for flushing of all tables, which ensures that anything in the commitlog is removed that could cause truncated data to reappear. If auto_snapshot is disabled, you can reduce this time. write_request_timeout_in_ms (Default: 10000) The time in milliseconds that the coordinator waits for write operations to complete. Related information: About hinted handoff writes request_timeout_in_ms (Default: 10000) The default time out in milliseconds for other, miscellaneous operations. Related information: About hinted handoff writes Inter-node settings 91 Configuration cross_node_timeout (Default: false) Enable or disable operation timeout information exchange between nodes (to accurately measure request timeouts). If disabled Cassandra assumes the request was forwarded to the replica instantly by the coordinator. Caution: Before enabling this property make sure NTP (network time protocol) is installed and the times are synchronized between the nodes. internode_send_buff_size_in_bytes note (Default: N/A) Sets the sending socket buffer size in bytes for inter-node calls. internode_recv_buff_size_in_bytes note (Default: N/A) Sets the receiving socket buffer size in bytes for inter-node calls. internode_compression (Default: all) Controls whether traffic between nodes is compressed. The valid values are: • • • all: All traffic is compressed. dc: Traffic between data centers is compressed. none: No compression. inter_dc_tcp_nodelay (Default: false) Enable or disable tcp_nodelay for inter-data center communication. When disabled larger, but fewer, network packets are sent. This reduces overhead from the TCP protocol itself. However, if cross data-center responses are blocked, it will increase latency. streaming_socket_timeout_in_ms note (Default: 0 - never timeout streams) Enable or disable socket timeout for streaming operations. When a timeout occurs during streaming, streaming is retried from the start of the current file. Avoid setting this value too low, as it can result in a significant amount of data re-streaming. Native transport (CQL Binary Protocol) start_native_transport (Default: true) Enable or disable the native transport server. Note that the address on which the native transport is bound is the same as the rpc_address. However, the port is different from the rpc_port and specified in native_transport_port. native_transport_port (Default: 9042) Port on which the CQL native transport listens for clients. native_transport_max_threads note (Default: 128) The maximum number of thread handling requests. The meaning is the same as rpc_max_threads. native_transport_max_frame_size_in_mb (Default: 256MB) The maximum size of allowed frame. Frame (requests) larger than this are rejected as invalid. RPC (remote procedure call) settings Settings for configuring and tuning client connections. broadcast_rpc_address note (Default: unset) RPC address to broadcast to drivers and other Cassandra nodes. This cannot be set to 0.0.0.0. If blank, it is set to the value of the rpc_address. If rpc_address is set to 0.0.0.0, this property must be set. rpc_port (Default: 9160) The port for the Thrift RPC service, which is used for client connections. start_rpc (Default: true) Starts the Thrift RPC server. 92 Configuration rpc_keepalive (Default: true) Enable or disable keepalive on client connections. rpc_max_threads note (Default: unlimited) Regardless of your choice of RPC server (rpc_server_type), the number of maximum requests in the RPC thread pool dictates how many concurrent requests are possible. However, if you are using the parameter sync in the rpc_server_type, it also dictates the number of clients that can be connected. For a large number of client connections, this could cause excessive memory usage for the thread stack. Connection pooling on the client side is highly recommended. Setting a maximum thread pool size acts as a safeguard against misbehaved clients. If the maximum is reached, Cassandra blocks additional connections until a client disconnects. rpc_min_threads note (Default: 16) Sets the minimum thread pool size for remote procedure calls. rpc_recv_buff_size_in_bytes note (Default: N/A) Sets the receiving socket buffer size for remote procedure calls. rpc_send_buff_size_in_bytes note (Default: N/A) Sets the sending socket buffer size in bytes for remote procedure calls. rpc_server_type (Default: sync) Cassandra provides three options for the RPC server. On Windows, sync is about 30% slower than hsha. On Linux, sync and hsha performance is about the same, but hsha uses less memory. • • • sync: (default) One connection per thread in the RPC pool. For a very large number of clients, memory is the limiting factor. On a 64 bit JVM, 128KB is the minimum stack size per thread. Connection pooling is strongly recommended. hsha: Half synchronous, half asynchronous. The RPC thread pool is used to manage requests, but the threads are multiplexed across the different clients. All Thrift clients are handled asynchronously using a small number of threads that does not vary with the number of clients (and thus scales well to many clients). The RPC requests are synchronous (one thread per active request). Your own RPC server: You must provide a fully-qualified class name of an o.a.c.t.TServerFactory that can create a server instance. Advanced fault detection settings Settings to handle poorly performing or failing nodes. dynamic_snitch_badness_threshold (Default: 0.1) Sets the performance threshold for dynamically routing requests away from a poorly performing node. A value of 0.2 means Cassandra continues to prefer the static snitch values until the node response time is 20% worse than the best performing node. Until the threshold is reached, incoming client requests are statically routed to the closest replica (as determined by the snitch). Having requests consistently routed to a given replica can help keep a working set of data hot when read repair is less than 1. dynamic_snitch_reset_interval_in_ms (Default: 600000 milliseconds) Time interval to reset all node scores, which allows a bad node to recover. dynamic_snitch_update_interval_in_ms (Default: 100 milliseconds) The time interval for calculating read latency. hinted_handoff_enabled (Default: true) Enable or disable hinted handoff. To enable per data center, add data center list. For example: hinted_handoff_enabled: DC1,DC2. A hint indicates that the write needs to be replayed to an unavailable node. Where Cassandra writes the hint depends on the version: • • Prior to 1.0: Writes to a live replica node. 1.0 and later: Writes to the coordinator node. Related information: About hinted handoff writes 93 Configuration hinted_handoff_throttle_in_kb (Default: 1024) Maximum throttle per delivery thread in kilobytes per second. This rate reduces proportionally to the number of nodes in the cluster. For example, if there are two nodes in the cluster, each delivery thread will use the maximum rate. If there are three, each node will throttle to half of the maximum, since the two nodes are expected to deliver hints simultaneously. max_hint_window_in_ms (Default: 10800000 milliseconds [3 hours]) Maximum amount of time that hints are generates hints for an unresponsive node. After this interval, new hints are no longer generated until the node is back up and responsive. If the node goes down again, a new interval begins. This setting can prevent a sudden demand for resources when a node is brought back online and the rest of the cluster attempts to replay a large volume of hinted writes. Related information: Failure detection and recovery max_hints_delivery_threads (Default: 2) Number of threads with which to deliver hints. In multiple data-center deployments, consider increasing this number because cross data-center handoff is generally slower. batchlog_replay_throttle_in_kb (Default: 1024KB per second) Total maximum throttle. Throttling is reduced proportionally to the number of nodes in the cluster. Request scheduler properties Settings to handle incoming client requests according to a defined policy. If you need to use these properties, your nodes are overloaded and dropping requests. It is recommended that you add more nodes and not try to prioritize requests. request_scheduler (Default: org.apache.cassandra.scheduler.NoScheduler) Defines a scheduler to handle incoming client requests according to a defined policy. This scheduler is useful for throttling client requests in single clusters containing multiple keyspaces. This is specifically for requests from the client and does not affect inter-node communication. Valid values are: • • • org.apache.cassandra.scheduler.NoScheduler: No scheduling takes place and does not have any options. org.apache.cassandra.scheduler.RoundRobinScheduler: See request_scheduler_options properties. A Java class that implements the RequestScheduler interface. request_scheduler_id note (Default: keyspace) An identifier on which to perform request scheduling. Currently the only valid value is keyspace. request_scheduler_options (Default: disabled) Contains a list of properties that define configuration options for request_scheduler: • • • throttle_limit: (Default: 80) The number of active requests per client. Requests beyond this limit are queued up until running requests complete. Recommended value is ((concurrent_reads + concurrent_writes) × 2). note default_weight: (Default: 5) How many requests are handled during each turn of the RoundRobin. weights: (Default: Keyspace1: 1, Keyspace2: 5) How many requests are handled during each turn of the RoundRobin, based on the request_scheduler_id. Takes a list of keyspaces: weights. Thrift interface properties Legacy API for older clients. CQL is a simpler and better API for Cassandra. thrift_framed_transport_size_in_mb 94 Configuration (Default: 15) Frame size (maximum field length) for Thrift. The frame is the row or part of the row that the application is inserting. thrift_max_message_length_in_mb (Default: 16) The maximum length of a Thrift message in megabytes, including all fields and internal Thrift overhead (1 byte of overhead for each frame). Message length is usually used in conjunction with batches. A frame length greater than or equal to 24 accommodates a batch with four inserts, each of which is 24 bytes. The required message length is greater than or equal to 24+24+24+24+4 (number of frames). Security properties Server and client security settings. authenticator (Default: AllowAllAuthenticator) The authentication backend. It implements IAuthenticator for identifying users. The available authenticators are: • • AllowAllAuthenticator: Disables authentication; no checks are performed. PasswordAuthenticator: Authenticates users with user names and hashed passwords stored in the system_auth.credentials table. If you use the default, 1, and the node with the lone replica goes down, you will not be able to log into the cluster because the system_auth keyspace was not replicated. Related information: Internal authentication internode_authenticator note (Default: enabled) Internode authentication backend, implementing org.apache.cassandra.auth.AllowAllInternodeAuthenticator. Allows or disallows connections from peer nodes. authorizer (Default: AllowAllAuthorizer) The authorization backend. It implements IAuthenticator to limit access and provide permissions. The available authorizers are: • • AllowAllAuthorizer: Disables authorization; allows any action to any user. CassandraAuthorizer: Stores permissions in system_auth.permissions table. If you use the default, 1, and the node with the lone replica goes down, you will not be able to log into the cluster because the system_auth keyspace was not replicated. Related information: Object permissions permissions_validity_in_ms (Default: 2000) How long permissions in cache remain valid. Depending on the authorizer, such as CassandraAuthorizer, fetching permissions can be resource intensive. This setting disabled when set to 0 or when AllowAllAuthorizer is set. Related information: Object permissions server_encryption_options Enable or disable inter-node encryption. You must also generate keys and provide the appropriate key and trust store locations and passwords. No custom encryption options are currently enabled. The available options are: • internode_encryption: (Default: none) Enable or disable encryption of inter-node communication using the TLS_RSA_WITH_AES_128_CBC_SHA cipher suite for authentication, key exchange, and encryption of data transfers. The available inter-node options are: • • • • all: Encrypt all inter-node communications. none: No encryption. dc: Encrypt the traffic between the data centers (server only). rack: Encrypt the traffic between the racks(server only). 95 Configuration • • • • keystore: (Default: conf/.keystore) The location of a Java keystore (JKS) suitable for use with Java Secure Socket Extension (JSSE), which is the Java version of the Secure Sockets Layer (SSL), and Transport Layer Security (TLS) protocols. The keystore contains the private key used to encrypt outgoing messages. keystore_password: (Default: cassandra) Password for the keystore. truststore: (Default: conf/.truststore) Location of the truststore containing the trusted certificate for authenticating remote servers. truststore_password: (Default: cassandra) Password for the truststore. The passwords used in these options must match the passwords used when generating the keystore and truststore. For instructions on generating these files, see Creating a Keystore to Use with JSSE. The advanced settings are: • • • • • protocol: (Default: TLS) algorithm: (Default: SunX509) store_type: (Default: JKS) cipher_suites: TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA) require_client_auth: (Default: false) Enables or disables certificate authentication. (Default: Related information: Node-to-node encryption client_encryption_options Enable or disable client-to-node encryption. You must also generate keys and provide the appropriate key and trust store locations and passwords. No custom encryption options are currently enabled. The available options are: • • • • • • enabled: (Default: false) To enable, set to true. keystore: (Default: conf/.keystore) The location of a Java keystore (JKS) suitable for use with Java Secure Socket Extension (JSSE), which is the Java version of the Secure Sockets Layer (SSL), and Transport Layer Security (TLS) protocols. The keystore contains the private key used to encrypt outgoing messages. keystore_password: (Default: cassandra) Password for the keystore. This must match the password used when generating the keystore and truststore. require_client_auth: (Default: false) Enables or disables certificate authentication. (Available starting with Cassandra 1.2.3.) truststore: (Default: conf/.truststore) Set if require_client_auth is true. truststore_password: <truststore_password> Set if require_client_auth is true. The advanced settings are: • • • • protocol: (Default: TLS) algorithm: (Default: SunX509) store_type: (Default: JKS) cipher_suites: TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA) (Default: Related information: Client-to-node encryption ssl_storage_port (Default: 7001) The SSL port for encrypted communication. Unused unless enabled in encryption_options. 96 Configuration Configuring gossip settings About this task When a node first starts up, it looks at its cassandra.yaml configuration file to determine the name of the Cassandra cluster it belongs to; which nodes (called seeds) to contact to obtain information about the other nodes in the cluster; and other parameters for determining port and range information. Procedure In the cassandra.yaml file, set the following parameters: Property Description cluster_name Name of the cluster that this node is joining. Must be the same for every node in the cluster. listen_address The IP address or hostname that Cassandra binds to for listening to other Cassandra nodes. (Optional) broadcast_address The IP address a node tells other nodes in the cluster to contact it by. It allows public and private address to be different. For example, use the broadcast_address parameter in topologies where not all nodes have access to other nodes by their private IP addresses. The default is the listen_address. seed_provider A -seeds list is comma-delimited list of hosts (IP addresses) that gossip uses to learn the topology of the ring. Every node should have the same list of seeds. In multiple data-center clusters, the seed list should include at least one node from each data center (replication group). More than a single seed node per data center is recommended for fault tolerance. Otherwise, gossip has to communicate with another data center when bootstraping a node. Making every node a seed node is not recommended because of increased maintenance and reduced performance. storage_port The inter-node communication port (default is 7000). Must be the same for every node in the cluster. initial_token For legacy clusters. Used in the single-node-pertoken architecture, where a node owns exactly one contiguous range in the ring space. num_tokens For new clusters. Defines the number of tokens randomly assigned to this node on the ring when using virtual nodes (vnodes). 97 Configuration Configuring the heap dump directory Analyzing the heap dump file can help troubleshoot memory problems. About this task Cassandra starts Java with the option -XX:-HeapDumpOnOutOfMemoryError. Using this option triggers a heap dump in the event of an out-of-memory condition. The heap dump file consists of references to objects that cause the heap to overflow. By default, Cassandra puts the file a subdirectory of the working, root directory when running as a service. If Cassandra does not have write permission to the root directory, the heap dump fails. If the root directory is too small to accommodate the heap dump, the server crashes. For a heap dump to succeed and to prevent crashes, configure a heap dump directory that meets these requirements: • • Accessible to Cassandra for writing Large enough to accommodate a heap dump This file is located in: • • Package installations: /etc/dse/cassandra Tarball installations: install_location/resources/cassandra/conf Base the size of the directory on the value of the Java -mx option. Procedure 1. Open the cassandra-env.sh file for editing. # set jvm HeapDumpPath with CASSANDRA_HEAPDUMP_DIR 2. Scroll down to the comment about the heap dump path: # set jvm HeapDumpPath with CASSANDRA_HEAPDUMP_DIR 3. On the line after the comment, set the CASSANDRA_HEAPDUMP_DIR to the path you want to use: # set jvm HeapDumpPath with CASSANDRA_HEAPDUMP_DIR CASSANDRA_HEAPDUMP_DIR =<path> 4. Save the cassandra-env.sh file and restart. Generating tokens If not using virtual nodes (vnodes), you still need to calculate tokens for your cluster. The following topics in the Cassandra 1.1 documentation provide conceptual information about tokens: • • Data Distribution in the Ring Replication Strategy About calculating tokens for single or multiple data centers in Cassandra 1.2 and later • • Single data center deployments: calculate tokens by dividing the hash range by the number of nodes in the cluster. Multiple data center deployments: calculate the tokens for each data center so that the hash range is evenly divided for the nodes in each data center. For more explanation, see be sure to read the conceptual information mentioned above. The method used for calculating tokens depends on the type of partitioner: 98 Configuration Calculating tokens for the Murmur3Partitioner Use this method for generating tokens when you are not using virtual nodes (vnodes) and using the 63 Murmur3Partitioner (default). This partitioner uses a maximum possible range of hash values from -2 to 63 +2 -1. To calculate tokens for this partitioner: python -c 'print [str(((2**64 / number_of_tokens) * i) - 2**63) for i in range(number_of_tokens)]' For example, to generate tokens for 6 nodes: python -c 'print [str(((2**64 / 6) * i) - 2**63) for i in range(6)]' The command displays the token for each node: [ '-9223372036854775808', '-6148914691236517206', '-3074457345618258604', '-2', '3074457345618258600', '6148914691236517202' ] Calculating tokens for the RandomPartitioner To calculate tokens when using the RandomPartitioner in Cassandra 1.2 clusters, use the Cassandra 1.1 Token Generating Tool. Configuring virtual nodes Enabling virtual nodes on a new cluster About this task Generally when all nodes have equal hardware capability, they should have the same number of virtual nodes (vnodes). If the hardware capabilities vary among the nodes in your cluster, assign a proportional number of vnodes to the larger machines. For example, you could designate your older machines to use 128 vnodes and your new machines (that are twice as powerful) with 256 vnodes. Procedure Set the number of tokens on each node in your cluster with the num_tokens parameter in the cassandra.yaml file. The recommended value is 256. Do not set the initial_token parameter. Enabling virtual nodes on an existing production cluster About this task For production clusters, enabling virtual nodes (vnodes) has less impact on performance if you bring up a another data center configured with vnodes already enabled and let Cassandra automatic mechanisms distribute the existing data into the new nodes. Procedure 1. Add a new data center to the cluster. 2. Once the new data center with vnodes enabled is up, switch your clients to use the new data center. 3. Run a full repair with nodetool repair. This step ensures that after you move the client to the new data center that any previous writes are added to the new data center and that nothing else, such as hints, is dropped when you remove the old data center. 4. Update your schema to no longer reference the old data center. 99 Configuration 5. Remove the old data center from the cluster. See Decommissioning a data center. Configuring logging Cassandra 2.1 introduces a new logging backend. Cassandra provides logging functionality using Simple Logging Facade for Java (SLF4J) with a logback backend. Logs are written to the system.log file in the Cassandra logging directory. You can configure logging programmatically or manually. Manual ways to configure logging are: • • • Run the nodetool setlogginglevel command Configure the logback-test.xml or logback.xml file installed with Cassandra Use the JConsole tool to configure logging through JMX. Logback looks for logback-test.xml first, and then for logback.xml. The logback.xml location for different types of installations is listed in the "File locations" section. For example, on tarball and source installations, logback.xml is located in the install_location/conf directory. The XML configuration files look something like this: <configuration scan="true"> <jmxConfigurator /> <appender name="FILE" class="ch.qos.logback.core.rolling.RollingFileAppender"> <file>${cassandra.logdir}/system.log</file> <rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> <fileNamePattern>${cassandra.logdir}/system.log.%i.zip</fileNamePattern> <minIndex>1</minIndex> <maxIndex>20</maxIndex> </rollingPolicy> <triggeringPolicy class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> <maxFileSize>20MB</maxFileSize> </triggeringPolicy> <encoder> <pattern>%-5level [%thread] %date{ISO8601} %F:%L - %msg%n</pattern> <!-- old-style log format <pattern>%5level [%thread] %date{ISO8601} %F (line %L) %msg%n</pattern> --> </encoder> </appender> <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender"> <encoder> <pattern>%-5level %date{HH:mm:ss,SSS} %msg%n</pattern> </encoder> </appender> <root level="INFO"> <appender-ref ref="FILE" /> <appender-ref ref="STDOUT" /> </root> <logger name="com.thinkaurelius.thrift" level="ERROR"/> </configuration> The appender configurations specify where to print the log and its configuration. The first appender directs logs to a file. The second appender directs logs to the console. You can change the following logging functionality: 100 Configuration • Rolling policy • • • The policy for rolling logs over to an archive • Location and name of the log file • Location and name of the archive • Minimum and maximum file size to trigger rolling Format of the message The log level Log levels The valid values for setting the log level include ALL for logging information at all levels, TRACE through ERROR, and OFF for no logging. TRACE creates the most verbose log, and ERROR, the least. • • • • • • • ALL TRACE DEBUG INFO (Default) WARN ERROR OFF Note: Increasing logging levels can generate heavy logging output on a moderately trafficked cluster. You can use the nodetool getlogginglevels command to see the current logging configuration. $ nodetool getlogginglevels Logger Name ROOT com.thinkaurelius.thrift Log Level INFO ERROR Migrating to logback from log4j If you upgrade from a previous version of Cassandra that used log4j, you can convert log4j.properties files to logback.xml using the logback PropertiesTranslator web-application. Using log file rotation The default policy rolls the system.log file after the size exceeds 20MB. Archives are compressed in zip format. Logback names the log files system.log.1.zip, system.log.2.zip, and so on. For more information, see logback documentation. Commit log archive configuration Cassandra provides commitlog archiving and point-in-time recovery. About this task You configure this feature in the commitlog_archiving.properties configuration file, which is located in the following directories: • • • • Cassandra Package installations: /etc/cassandra/conf Cassandra Tarball installations: install_location/conf DataStax Enterprise Package installations: /etc/dse/cassandra DataStax Enterprise Tarball installations: install_location/resources/cassandra/conf 101 Configuration The commands archive_command and restore_command expect only a single command with arguments. The parameters must be entered verbatim. STDOUT and STDIN or multiple commands cannot be executed. To workaround, you can script multiple commands and add a pointer to this file. To disable a command, leave it blank. Procedure • Archive a commitlog segment: Command archive_command= Parameters %path Fully qualified path of the segment to archive. %name Name of the commit log. Example • archive_command=/bin/ln %path / backup/%name Restore an archived commitlog: Command restore_command= Parameters %from Fully qualified path of the an archived commitlog segment from the restore_directories. %t Example • • Name of live commit log directory. restore_command=cp -f %from %to Set the restore directory location: Command restore_directories= Format restore_directories=restore_directory_location Restore mutations created up to and including the specified timestamp: Command restore_point_in_time= Format <timestamp> (YYYY:MM:DD HH:MM:SS) Example restore_point_in_time=2013:12:11 17:00:00 Restore stops when the first client-supplied timestamp is greater than the restore point timestamp. Because the order in which Cassandra receives mutations does not strictly follow the timestamp order, this can leave some mutations unrecovered. Hadoop support Cassandra 2.1 improves support for integrating Hadoop with Cassandra: • • MapReduce Apache Pig You can use Cassandra 2.1 with Hadoop 2.x or 1.x with some restrictions. • • Isolate Cassandra and Hadoop nodes in separate data centers. Before starting the data centers of Cassandra/Hadoop nodes, disable virtual nodes (vnodes). To disable virtual nodes: 102 Configuration 1. In the cassandra.yaml file, set num_tokens to 1. 2. Uncomment the initial_token property and set it to 1 or to the value of a generated token for a multinode cluster. 3. Start the cluster for the first time. Do not disable or enable vnodes on an existing cluster. Setup and configuration, described in the Apache docs, involves overlaying a Hadoop cluster on Cassandra nodes, configuring a separate server for the Hadoop NameNode/JobTracker, and installing a Hadoop TaskTracker and Data Node on each Cassandra node. The nodes in the Cassandra data center can draw from data in the HDFS Data Node as well as from Cassandra. The Job Tracker/Resource Manager (JT/RM) receives MapReduce input from the client application. The JT/RM sends a MapReduce job request to the Task Trackers/Node Managers (TT/NM) and optional clients, MapReduce and Pig. The data is written to Cassandra and results sent back to the client. The Apache docs also cover how to get configuration and integration support. Input and Output Formats Hadoop jobs can receive data from CQL tables and indexes and you can load data into Cassandra from a Hadoop job. Cassandra 2.1 supports the following formats for these tasks: • • CQL partition input format: ColumnFamilyInputFormat class. BulkOutputFormat class introduced in Cassandra 1.1 Cassandra 2.1.1 and later supports the CqlOutputFormat, which is the CQL-compatible version of the BulkOutputFormat class. The CQLOutputFormat acts as a Hadoop-specific OutputFormat. Reduce tasks can store keys (and corresponding bound variable values) as CQL rows (and respective columns) in a given CQL table. Cassandra 2.1.1 supports using the CQLOutputFormat with Apache Pig. 103 Configuration Running the wordcount example Wordcount example JARs are located in the examples directory of the Cassandra source code installation. There are CQL and legacy examples in the hadoop_cql3_word_count and hadoop_word_count subdirectories, respectively. Follow instructions in the readme files. Isolating Hadoop and Cassandra workloads When you create a keyspace using CQL, Cassandra creates a virtual data center for a cluster, even a onenode cluster, automatically. You assign nodes that run the same type of workload to the same data center. The separate, virtual data centers for different types of nodes segregate workloads running Hadoop from those running Cassandra. Segregating workloads ensures that only one type of workload is active per data center. Separating nodes running a sequential data load, from nodes running any other type of workload, such as Cassandra real-time OLTP queries is a best practice. 104 Operations Operations Monitoring Cassandra Monitoring a Cassandra cluster Understanding the performance characteristics of your Cassandra cluster is critical to diagnosing issues and planning capacity. Cassandra exposes a number of statistics and management operations via Java Management Extensions (JMX). JMX is a Java technology that supplies tools for managing and monitoring Java applications and services. Any statistic or operation that a Java application has exposed as an MBean can then be monitored or manipulated using JMX. During normal operation, Cassandra outputs information and statistics that you can monitor using JMXcompliant tools, such as: • • • The Cassandra nodetool utility DataStax OpsCenter management console JConsole Using the same tools, you can perform certain administrative commands and operations such as flushing caches or doing a node repair. Monitoring using the nodetool utility The nodetool utility is a command-line interface for monitoring Cassandra and performing routine database operations. Included in the Cassandra distribution, nodetool and is typically run directly from an operational Cassandra node. The nodetool utility supports the most important JMX metrics and operations, and includes other useful commands for Cassandra administration, such as the proxyhistogram command. This example shows the output from nodetool proxyhistograms after running 4,500 insert statements and 45,000 select statements on a three ccm node-cluster on a local computer. $ nodetool proxyhistograms proxy histograms Percentile Read Latency (micros) 50% 1502.50 75% 1714.75 95% 31210.25 98% 36365.00 99% 36365.00 Min 616.00 Max 36365.00 Write Latency (micros) 375.00 420.00 507.00 577.36 740.60 230.00 55726.00 Range Latency (micros) 446.00 498.00 800.20 948.40 1024.39 311.00 59247.00 For a summary of the ring and its current state of general health, use the status command. For example: $ nodetool status Note: Ownership information does not include topology; for complete information, specify a keyspace Datacenter: datacenter1 ======================= Status=Up/Down |/ State=Normal/Leaving/Joining/Moving 105 Operations -- Address Rack UN 127.0.0.1 rack1 UN 127.0.0.2 rack1 UN 127.0.0.3 rack1 Load Tokens Owns Host ID 47.66 KB 1 33.3% aaa1b7c1-6049-4a08-ad3e-3697a0e30e10 47.67 KB 1 33.3% 1848c369-4306-4874-afdf-5c1e95b8732e 47.67 KB 1 33.3% 49578bf1-728f-438d-b1c1-d8dd644b6f7f The nodetool utility provides commands for viewing detailed metrics for tables, server metrics, and compaction statistics: • • • • nodetool cfstats displays statistics for each table and keyspace. nodetool cfhistograms provides statistics about a table, including read/write latency, row size, column count, and number of SSTables. nodetool netstats provides statistics about network operations and connections. nodetool tpstats provides statistics about the number of active, pending, and completed tasks for each stage of Cassandra operations by thread pool. DataStax OpsCenter DataStax OpsCenter is a graphical user interface for monitoring and administering all nodes in a Cassandra cluster from one centralized console. DataStax OpsCenter is bundled with DataStax support offerings. You can register for a free version for development or non-production use. OpsCenter provides a graphical representation of performance trends in a summary view that is hard to obtain with other monitoring tools. The GUI provides views for different time periods as well as the capability to drill down on single data points. Both real-time and historical performance data for a Cassandra or DataStax Enterprise cluster are available in OpsCenter. OpsCenter metrics are captured and stored within Cassandra. Within OpsCenter you can customize the performance metrics viewed to meet your monitoring needs. Administrators can also perform routine node administration tasks from OpsCenter. Metrics within OpsCenter are divided into three general categories: table metrics, cluster metrics, and OS metrics. For many of the available metrics, you can view aggregated cluster-wide information or view information on a per-node basis. 106 Operations Monitoring using JConsole JConsole is a JMX-compliant tool for monitoring Java applications such as Cassandra. It is included with Sun JDK 5.0 and higher. JConsole consumes the JMX metrics and operations exposed by Cassandra and displays them in a well-organized GUI. For each node monitored, JConsole provides these six separate tab views: • Overview • Displays overview information about the Java VM and monitored values. Memory • Displays information about memory use. Threads • Displays information about thread use. Classes • Displays information about class loading. VM Summary • Displays information about the Java Virtual Machine (VM). Mbeans Displays information about MBeans. The Overview and Memory tabs contain information that is very useful for Cassandra developers. The Memory tab allows you to compare heap and non-heap memory usage, and provides a control to immediately perform Java garbage collection. For specific Cassandra metrics and operations, the most important area of JConsole is the MBeans tab. This tab lists the following Cassandra MBeans: • org.apache.cassandra.db • Includes caching, table metrics, and compaction. org.apache.cassandra.internal • Internal server operations such as gossip and hinted handoff. org.apache.cassandra.net • Inter-node communication including FailureDetector, MessagingService and StreamingService. org.apache.cassandra.request Tasks related to read, write, and replication operations. When you select an MBean in the tree, its MBeanInfo and MBean Descriptor are displayed on the right, and any attributes, operations or notifications appear in the tree below it. For example, selecting and expanding the org.apache.cassandra.db MBean to view available actions for a table results in a display like the following: 107 Operations If you choose to monitor Cassandra using JConsole, keep in mind that JConsole consumes a significant amount of system resources. For this reason, DataStax recommends running JConsole on a remote machine rather than on the same host as a Cassandra node. The JConsole CompactionManagerMBean exposes compaction metrics that can indicate when you need to add capacity to your cluster. Compaction metrics Monitoring compaction performance is an important aspect of knowing when to add capacity to your cluster. The following attributes are exposed through CompactionManagerMBean: Table 8: Compaction Metrics Attribute Description CompletedTasks Number of completed compactions since the last start of this Cassandra instance PendingTasks Number of estimated tasks remaining to perform ColumnFamilyInProgress The table currently being compacted. This attribute is null if no compactions are in progress. BytesTotalInProgress Total number of data bytes (index and filter are not included) being compacted. This attribute is null if no compactions are in progress. BytesCompacted The progress of the current compaction. This attribute is null if no compactions are in progress. Thread pool and read/write latency statistics Cassandra maintains distinct thread pools for different stages of execution. Each of the thread pools provide statistics on the number of tasks that are active, pending, and completed. Trends on these pools for increases in the pending tasks column indicate when to add additional capacity. After a baseline is established, configure alarms for any increases above normal in the pending tasks column. Use nodetool tpstats on the command line to view the thread pool details shown in the following table. Table 9: Compaction Metrics 108 Thread Pool Description AE_SERVICE_STAGE Shows anti-entropy tasks. Operations Thread Pool Description CONSISTENCY-MANAGER Handles the background consistency checks if they were triggered from the client's consistency level. FLUSH-SORTER-POOL Sorts flushes that have been submitted. FLUSH-WRITER-POOL Writes the sorted flushes. GOSSIP_STAGE Activity of the Gossip protocol on the ring. LB-OPERATIONS The number of load balancing operations. LB-TARGET Used by nodes leaving the ring. MEMTABLE-POST-FLUSHER Memtable flushes that are waiting to be written to the commit log. MESSAGE-STREAMING-POOL Streaming operations. Usually triggered by bootstrapping or decommissioning nodes. MIGRATION_STAGE Tasks resulting from the call of system_* methods in the API that have modified the schema. MISC_STAGE MUTATION_STAGE API calls that are modifying data. READ_STAGE API calls that have read data. RESPONSE_STAGE Response tasks from other nodes to message streaming from this node. STREAM_STAGE Stream tasks from this node. Read/Write latency metrics Cassandra tracks latency (averages and totals) of read, write, and slicing operations at the server level through StorageProxyMBean. Table statistics For individual tables, ColumnFamilyStoreMBean provides the same general latency attributes as StorageProxyMBean. Unlike StorageProxyMBean, ColumnFamilyStoreMBean has a number of other statistics that are important to monitor for performance trends. The most important of these are: Table 10: Compaction Metrics Attribute Description MemtableDataSize The total size consumed by this table's data (not including metadata). MemtableColumnsCount Returns the total number of columns present in the memtable (across all keys). MemtableSwitchCount How many times the memtable has been flushed out. RecentReadLatencyMicros The average read latency since the last call to this bean. RecentWriterLatencyMicros The average write latency since the last call to this bean. 109 Operations Attribute Description LiveSSTableCount The number of live SSTables for this table. The recent read latency and write latency counters are important in making sure operations are happening in a consistent manner. If these counters start to increase after a period of staying flat, you probably need to add capacity to the cluster. You can set a threshold and monitor LiveSSTableCount to ensure that the number of SSTables for a given table does not become too great. Tuning Bloom filters Cassandra uses Bloom filters to determine whether an SSTable has data for a particular row. Bloom filters are unused for range scans, but are used for index scans. Bloom filters are probabilistic sets that allow you to trade memory for accuracy. This means that higher Bloom filter attribute settings bloom_filter_fp_chance use less memory, but will result in more disk I/O if the SSTables are highly fragmented. Bloom filter settings range from 0 to 1.0 (disabled). The default value of bloom_filter_fp_chance depends on the compaction strategy. The LeveledCompactionStrategy uses a higher default value (0.1) than the SizeTieredCompactionStrategy or DateTieredCompactionStrategy, which have a default of 0.01. Memory savings are nonlinear; going from 0.01 to 0.1 saves about one third of the memory. SSTables using LCS contain a relatively smaller ranges of keys than those using STCS, which facilitates efficient exclusion of the SSTables even without a bloom filter; however, adding a small bloom filter helps when there are many levels in LCS. The settings you choose depend the type of workload. For example, to run an analytics application that heavily scans a particular table, you would want to inhibit the Bloom filter on the table by setting it high. To view the observed Bloom filters false positive rate and the number of SSTables consulted per read use cfstats in the nodetool utility. Bloom filters are stored off-heap so you don't need include it when determining the -Xmx settings (the maximum memory size that the heap can reach for the JVM). To change the bloom filter property on a table, use CQL. For example: ALTER TABLE addamsFamily WITH bloom_filter_fp_chance = 0.1; After updating the value of bloom_filter_fp_chance on a table, Bloom filters need to be regenerated in one of these ways: • • Initiate compaction Upgrade SSTables You do not have to restart Cassandra after regenerating SSTables. Data caching Configuring data caches Cassandra includes integrated caching and distributes cache data around the cluster. When a node goes down, the client can read from another cached replica of the data. The integrated architecture also facilitates troubleshooting because there is no separate caching tier, and cached data matches what’s in the database exactly. The integrated cache solves the cold start problem by saving the cache to disk periodically. Cassandra reads contents back into the cache and distributes the data when it restarts. The cluster does not start with a cold cache. 110 Operations In Cassandra 2.1, the saved key cache files include the ID of the table in the file name. A saved key cache file name for the users table in the mykeyspace keyspace in a Cassandra 2.1 looks something like this: mykeyspace-users.users_name_idx-19bd7f80352c11e4aa6a57448213f97f-KeyCacheb.db2046071785672832311.tmp You can configure partial or full caching of each partition by setting the rows_per_partition table option. Previously, the caching mechanism put the entire partition in memory. If the partition was larger than the cache size, Cassandra never read the data from the cache. Now, you can specify the number of rows to cache per partition to increase cache hits. You configure the cache using the CQL caching property. About the partition key cache The partition key cache is a cache of the partition index for a Cassandra table. Using the key cache instead of relying on the OS page cache decreases seek times. However, enabling just the key cache results in disk (or OS page cache) activity to actually read the requested data rows. About the row cache You can configure the number of rows to cache in a partition. To cache rows, if the row key is not already in the cache, Cassandra reads the first portion of the partition, and puts the data in the cache. If the newly cached data does not include all cells configured by user, Cassandra performs another read. Typically, you enable either the partition key or row cache for a table, except archive tables, which are infrequently read. Disable caching entirely for archive tables. Enabling and configuring caching About this task Use CQL to enable or disable caching by configuring the caching table property. Set parameters in the cassandra.yaml file to configure global caching properties: • • • • Partition key cache size Row cache size How often Cassandra saves partition key caches to disk How often Cassandra saves row caches to disk Set the caching property using CREATE TABLE or ALTER TABLE. For example, configuring the row_cache_size_in_mb determines how much space in memory Cassandra allocates to store rows from the most frequently read partitions of the table. Procedure Set the table caching property that configures the partition key cache and the row cache. CREATE TABLE users ( userid text PRIMARY KEY, first_name text, last_name text, ) WITH caching = { 'keys' : 'NONE', 'rows_per_partition' : '120' }; How caching works When both row cache and partition key cache are configured, the row cache returns results whenever possible. In the event of a row cache miss, the partition key cache might still provide a hit that makes the disk seek much more efficient. This diagram depicts two read operations on a table with both caches already populated. 111 Operations One read operation hits the row cache, returning the requested row without a disk seek. The other read operation requests a row that is not present in the row cache but is present in the partition key cache. After accessing the row in the SSTable, the system returns the data and populates the row cache with this read operation. Tips for efficient cache use "Tuning the row cache in Cassandra 2.1" describes best practices of using the built-in caching mechanisms and designing an effective data model. Some tips for efficient cache use are: • • • Store lower-demand data or data with extremely long partitions in a table with minimal or no caching. Deploy a large number of Cassandra nodes under a relatively light load per node. Logically separate heavily-read data into discrete tables. When you query a table, turn on tracing to check that the table actually gets data from the cache rather than from disk. The first time you read data from a partition, the trace shows this line below the query becasue the cache has not been populated yet: Row cache miss [ReadStage:41] In subsequent queries for the same partition, look for a line in the trace that looks something like this: Row cache hit [ReadStage:55] This output means the data was found in the cache and no disk read occurred. Updates invalidate the cache. If you query rows in the cache plus uncached rows, request more rows than the global limit allows, or the query does not grab the beginning of the partition, the trace might include a line that looks something like this: Ignoring row cache as cached value could not satisfy query [ReadStage:89] This output indicates that an insufficient cache caused a disk read. Requesting rows not at the beginning of the partition is a likely cause. Try removing constraints that might cause the query to skip the beginning of the partition, or place a limit on the query to prevent results from overflowing the cache. To ensure that the query hits the cache, try increasing the cache size limit, or restructure the table to position frequently accessed rows at the head of the partition. 112 Operations Monitoring and adjusting caching Make changes to cache options in small, incremental adjustments, then monitor the effects of each change using DataStax Opscenter or the nodetool utility. The output of the nodetool info command shows the following row cache and key cache metrics, which are configured in the cassandra.yaml file: • • • • • • Cache size in bytes Capacity in bytes Number of hits Number of requests Recent hit rate Duration in seconds after which Cassandra saves the key cache. For example, on start-up, the information from nodetool info might look something like this: ID : 387d15ba-7103-491b-9327-1a691dbb504a Gossip active : true Thrift active : true Native Transport active: true Load : 65.87 KB Generation No : 1400189757 Uptime (seconds) : 148760 Heap Memory (MB) : 392.82 / 1996.81 Data Center : datacenter1 Rack : rack1 Exceptions : 0 Key Cache : entries 10, size 728 (bytes), capacity 103809024 (bytes), 93 hits, 102 requests, 0.912 recent hit rate, 14400 save period in seconds Row Cache : entries 0, size 0 (bytes), capacity 0 (bytes), 0 hits, 0 requests, NaN recent hit rate, 0 save period in seconds Counter Cache : entries 0, size 0 (bytes), capacity 51380224 (bytes), 0 hits, 0 requests, NaN recent hit rate, 7200 save period in seconds Token : -9223372036854775808 In the event of high memory consumption, consider tuning data caches. Configuring memtable throughput Configuring memtable throughput can improve write performance. Cassandra flushes memtables to disk, creating SSTables when the commit log space threshold has been exceeded. Configure the commit log space threshold per node in the cassandra.yaml. How you tune memtable thresholds depends on your data and write load. Increase memtable throughput under either of these conditions: • • The write load includes a high volume of updates on a smaller set of data. A steady stream of continuous writes occurs. This action leads to more efficient compaction. Allocating memory for memtables reduces the memory available for caching and other internal Cassandra structures, so tune carefully and in small increments. Configuring compaction About this task As discussed earlier, the compaction process merges keys, combines columns, evicts tombstones, consolidates SSTables, and creates a new index in the merged SSTable. In the cassandra.yaml file, you configure these global compaction parameters: • • snapshot_before_compaction in_memory_compaction_limit_in_mb 113 Operations • • • compaction_preheat_key_cache concurrent_compactors compaction_throughput_mb_per_sec The compaction_throughput_mb_per_sec parameter is designed for use with large partitions because compaction is throttled to the specified total throughput across the entire system. Cassandra provides a start-up option for testing compaction strategies without affecting the production workload. Using CQL, you configure a compaction strategy: • • • Size-tiered compaction Date-tiered compaction Leveled compaction To configure the compaction strategy property and CQL compaction subproperties, such as the maximum number of SSTables to compact and minimum SSTable size, use CREATE TABLE or ALTER TABLE. Procedure 1. Update a table to set the compaction strategy using the ALTER TABLE statement. ALTER TABLE users WITH compaction = { 'class' : 'LeveledCompactionStrategy' } 2. Change the compaction strategy property to SizeTieredCompactionStrategy and specify the minimum number of SSTables to trigger a compaction using the CQL min_threshold attribute. ALTER TABLE users WITH compaction = {'class' : 'SizeTieredCompactionStrategy', 'min_threshold' : 6 } Results You can monitor the results of your configuration using compaction metrics, see Compaction metrics. Compression Compression maximizes the storage capacity of Cassandra nodes by reducing the volume of data on disk and disk I/O, particularly for read-dominated workloads. Cassandra quickly finds the location of rows in the SSTable index and decompresses the relevant row chunks. Write performance is not negatively impacted by compression in Cassandra as it is in traditional databases. In traditional relational databases, writes require overwrites to existing data files on disk. The database has to locate the relevant pages on disk, decompress them, overwrite the relevant data, and finally recompress. In a relational database, compression is an expensive operation in terms of CPU cycles and disk I/O. Because Cassandra SSTable data files are immutable (they are not written to again after they have been flushed to disk), there is no recompression cycle necessary in order to process writes. SSTables are compressed only once when they are written to disk. Writes on compressed tables can show up to a 10 percent performance improvement. When to compress data Compression is best suited for tables that have many rows and each row has the same columns, or at least as many columns, as other rows. For example, a table containing user data such as username, email, and state, is a good candidate for compression. The greater the similarity of the data across rows, the greater the compression ratio and gain in read performance. A table that has rows of different sets of columns is not well-suited for compression. 114 Operations Don't confuse table compression with compact storage of columns, which is used for backward compatibility of old applications with CQL. Depending on the data characteristics of the table, compressing its data can result in: • • • 2x-4x reduction in data size 25-35% performance improvement on reads 5-10% performance improvement on writes After configuring compression on an existing table, subsequently created SSTables are compressed. Existing SSTables on disk are not compressed immediately. Cassandra compresses existing SSTables when the normal Cassandra compaction process occurs. Force existing SSTables to be rewritten and compressed by using nodetool upgradesstables (Cassandra 1.0.4 or later) or nodetool scrub. Configuring compression About this task You configure a table property and subproperties to manage compression. The CQL table properties documentation describes the types of compression options that are available. Compression is enabled by default. Procedure 1. Disable compression, using CQL to set the compression parameters to an empty string. CREATE TABLE DogTypes ( block_id uuid, species text, alias text, population varint, PRIMARY KEY (block_id) ) WITH compression = { 'sstable_compression' : '' }; 2. Enable compression on an existing table, using ALTER TABLE to set the compression algorithm sstable_compression to LZ4Compressor (Cassandra 1.2.2 and later), SnappyCompressor, or DeflateCompressor. CREATE TABLE DogTypes ( block_id uuid, species text, alias text, population varint, PRIMARY KEY (block_id) ) WITH compression = { 'sstable_compression' : 'LZ4Compressor' }; 3. Change compression on an existing table, using ALTER TABLE and setting the compression algorithm sstable_compression to DeflateCompressor. ALTER TABLE CatTypes WITH compression = { 'sstable_compression' : 'DeflateCompressor', 'chunk_length_kb' : 64 } You tune data compression on a per-table basis using CQL to alter a table. 115 Operations Testing compaction and compression About this task Write survey mode is a Cassandra startup option for testing new compaction and compression strategies. In write survey mode, you can test out new compaction and compression strategies on that node and benchmark the write performance differences, without affecting the production cluster. Write survey mode adds a node to a database cluster. The node accepts all write traffic as if it were part of the normal Cassandra cluster, but the node does not officially join the ring. Also use write survey mode to try out a new Cassandra version. The nodes you add in write survey mode to a cluster must be of the same major release version as other nodes in the cluster. The write survey mode relies on the streaming subsystem that transfers data between nodes in bulk and differs from one major release to another. If you want to see how read performance is affected by modifications, stop the node, bring it up as a standalone machine, and then benchmark read operations on the node. Procedure Enable write survey mode by starting a Cassandra node using the write_survey option. bin/cassandra – Dcassandra.write_survey=true This example shows how to start a tarball installation of Cassandra. Tuning Java resources Consider tuning Java resources in the event of a performance degradation or high memory consumption. There are two files that control environment settings for Cassandra: • conf/cassandra-env.sh • Java Virtual Machine (JVM) configuration settings bin/cassandra-in.sh Sets up Cassandra environment variables such as CLASSPATH and JAVA_HOME. Heap sizing options If you decide to change the Java heap sizing, both MAX_HEAP_SIZE and HEAP_NEWSIZE should should be set together in conf/cassandra-env.sh. • MAX_HEAP_SIZE • Sets the maximum heap size for the JVM. The same value is also used for the minimum heap size. This allows the heap to be locked in memory at process start to keep it from being swapped out by the OS. HEAP_NEWSIZE The size of the young generation. The larger this is, the longer GC pause times will be. The shorter it is, the more expensive GC will be (usually). A good guideline is 100 MB per CPU core. Tuning the Java heap Because Cassandra is a database, it spends significant time interacting with the operating system's I/O infrastructure through the JVM, so a well-tuned Java heap size is important. Cassandra's default configuration opens the JVM with a heap size that is based on the total amount of system memory: 116 Operations System Memory Heap Size Less than 2GB 1/2 of system memory 2GB to 4GB 1GB Greater than 4GB 1/4 system memory, but not more than 8GB Many users new to Cassandra are tempted to turn up Java heap size too high, which consumes the majority of the underlying system's RAM. In most cases, increasing the Java heap size is actually detrimental for these reasons: • • In most cases, the capability of Java to gracefully handle garbage collection above 8GB quickly diminishes. Modern operating systems maintain the OS page cache for frequently accessed data and are very good at keeping this data in memory, but can be prevented from doing its job by an elevated Java heap size. If you have more than 2GB of system memory, which is typical, keep the size of the Java heap relatively small to allow more memory for the page cache. Some Solr users have reported that increasing the stack size improves performance under Tomcat. To increase the stack size, uncomment and modify the default setting in the cassandra-env.sh file. Also, decreasing the memtable space to make room for Solr caches might improve performance. Modify the memtable space using the memtable_total_space_in_mb property in the cassandra.yaml file. Because MapReduce runs outside the JVM, changes to the JVM do not affect Analytics/Hadoop operations directly. How Cassandra uses memory Using a java-based system like Cassandra, you can typically allocate about 8GB of memory on the heap before garbage collection pause time starts to become a problem. Modern machines have much more memory than that and Cassandra can make use of additional memory as page cache when files on disk are accessed. Allocating more than 8GB of memory on the heap poses a problem due to the amount of Cassandra metadata about data on disk. The Cassandra metadata resides in memory and is proportional to total data. Some of the components grow proportionally to the size of total memory. In Cassandra 1.2 and later, the Bloom filter and compression offset map that store this metadata reside offheap, greatly increasing the capacity per node of data that Cassandra can handle efficiently. The partition summary also resides off-heap. About the off-heap row cache Cassandra can store cached rows in native memory, outside the Java heap. This results in both a smaller per-row memory footprint and reduced JVM heap requirements, which helps keep the heap size in the sweet spot for JVM garbage collection performance. Tuning Java garbage collection Cassandra's GCInspector class logs information about garbage collection whenever a garbage collection takes longer than 200ms. Garbage collections that occur frequently and take a moderate length of time to complete (such as ConcurrentMarkSweep taking a few seconds), indicate that there is a lot of garbage collection pressure on the JVM. Remedies include adding nodes, lowering cache sizes, or adjusting the JVM options regarding garbage collection. JMX options Cassandra exposes a number of statistics and management operations via Java Management Extensions (JMX). Java Management Extensions (JMX) is a Java technology that supplies tools for managing and monitoring Java applications and services. Any statistic or operation that a Java application has exposed 117 Operations as an MBean can then be monitored or manipulated using JMX. JConsole, the nodetool utility, and DataStax OpsCenter are examples of JMX-compliant management tools. By default, you can modify the following properties in the conf/cassandra-env.sh file to configure JMX to listen on port 7199 without authentication. • com.sun.management.jmxremote.port • The port on which Cassandra listens from JMX connections. com.sun.management.jmxremote.ssl • Enable/disable SSL for JMX. com.sun.management.jmxremote.authenticate • Enable/disable remote authentication for JMX. -Djava.rmi.server.hostname Sets the interface hostname or IP that JMX should use to connect. Uncomment and set if you are having trouble connecting. Purging gossip state on a node About this task Gossip information is persisted locally by each node to use immediately on node restart without having to wait for gossip communications. Procedure In the unlikely event you need to correct a problem in the gossip state: 1. Using MX4J or JConsole, connect to the node's JMX port and then use the JMX method Gossiper.unsafeAssassinateEndpoints(ip_address) to assassinate the problem node. This takes a few seconds to complete so wait for confirmation that the node is deleted. 2. If the JMX method above doesn't solve the problem, stop your client application from sending writes to the cluster. 3. Take the entire cluster offline: a) Drain each node. $ nodetool options drain b) Stop each node: • Package installations: • $ sudo service cassandra stop Tarball installations: $ sudo service cassandra stop 4. Clear the data from the peers directory: $ sudo rm -r /var/lib/cassandra/data/system/peers/* 5. Clear the gossip state when the node starts: • For tarball installations, you can use a command line option or edit the cassandra-env.sh. To use the command line: $ install_location/bin/cassandra -Dcassandra.load_ring_state=false 118 Operations • For package installations or if you are not using the command line option above, add the following line to the cassandra-env.sh file: JVM_OPTS="$JVM_OPTS -Dcassandra.load_ring_state=false" • Package installations: /usr/share/cassandra/cassandra-env.sh • Tarball installations: install_location/conf/cassandra-env.sh 6. Bring the cluster online one node at a time, starting with the seed nodes. • Package installations: • $ sudo service cassandra start Tarball installations: $ cd install_location $ bin/cassandra What to do next Remove the line you added in the cassandra-env.sh file. Repairing nodes Node repair makes data on a replica consistent with data on other nodes. Anti-entropy node repairs are important for every Cassandra cluster. Frequent data deletions and a node going down are common causes of inconsistency. You use the nodetool repair command to repair a node. There are several types of node repair, for example: • • • Incremental Partitioner range Endpoint range By default repairs are sequential, one node is repaired after another, and done in full, all SSTables are repaired. You can combine repair options, such as parallel and incremental repair. This combination does an incremental repair to all nodes at the same time. You can restrict repairs to local or other data centers or to nodes between a certain token range. You can specify which nodes have the good data to use to replace the outdated data. Incremental repair The repair process involves computing a Merkle tree for each range of data on that node. The Merkle tree is a binary tree of hashes used by Cassandra for calculating the differences in datasets between nodes in a cluster. Each node involved in the repair has to construct its Merkle tree from all the SSTables it stores, making the calculation very expensive. To reduce the expense of constructing trees, Cassandra 2.1 introduces a new type of repair, the incremental repair. An incremental repair makes already repaired data persistent, and only calculates a Merkle tree for unrepaired SSTables. 119 Operations Reducing the size of the Merkle tree improves the performance of the incremental repair process, assuming repairs are run frequently. Incremental repairs begin with the repair leader sending out a prepare message to its peers. Each node builds a Merkle tree from the unrepaired SStables. After the leader receives a Merkle tree from each node, the leader compares the trees and issues streaming requests. Finally, the leader issues an anticompaction command. For more information about incremental repairs, see the "More efficient repairs" article. Anticompaction Anticompaction in Cassandra 2.1 is the process of segregating repaired and unrepaired ranges into separate SSTables unless the SSTable fits entirely within the repaired range. If the SSTable fits within the repaired range, Cassandra just updates the SSTable metadata. Anticompaction occurs after an incremental repair. Cassandra performs anticompaction only on the SSTables that have a range of unrepaired data. If all node ranges are repaired, anticompaction does not need to rewrite any data. During anticompaction, size/date-tiered compaction and leveled compaction handle the segregation of the data differently. • • Size-tiered and date-tiered compaction splits repaired and unrepaired into separate pools for separate compactions. A major compaction generates two SSTables, one containing repaired data and one containing unrepaired data. Leveled compaction performs size-tiered compaction on unrepaired data. After repair completes, Cassandra moves data from the set of unrepaired SSTables to L0. Sequential versus parallel repair By default, Cassandra 2.1 does a sequential repair of all SSTables, constructing the Merkle trees for one node after the other. Cassandra takes a snapshot of each replica immediately and then sequentially 120 Operations repairs each replica from the snapshots. For example, if you have RF=3 and A, B and C represents three replicas, this command takes a snapshot of each replica immediately and then sequentially repairs each replica from the snapshots (A<->B, A<->C, B<->C). A parallel repair does the repair of nodes A, B, and C all at once. During this type of repair, the dynamic snitch maintains performance for your application using a replica in the snapshot that is not undergoing repair. Snapshots are hardlinks to existing SSTables. Snapshots are immutable and require almost no disk space. Repair requires intensive disk I/O because validation compaction occurs during Merkle tree construction. For any given replica set, only one replica at a time performs the validation compaction. Partitioner range repair Using the nodetool repair -pr (–partitioner-range) option repairs only the first range returned by the partitioner for a node. Other replicas for that range still have to perform the Merkle tree calculation, causing a validation compaction. Because all the replicas are compacting at the same time, all the nodes may be slow to respond for that portion of the data. This type of repair operates on each node in the cluster in succession without duplicating work. Merkle trees do not have infinite resolution and Cassandra makes a tradeoff between the size and space. Currently, Cassandra uses a fixed depth of 15 for the tree (32K leaf nodes). For a node containing a million partitions with one damaged partition, about 30 partitions are streamed, which is the number that fall into each of the leaves of the tree. The problem gets worse when more partitions exist per node, and results in significant disk space usage and needless compaction. Generally, partitioner range repairs are not recommended. Repairing a subrange To mitigate overstreaming, you can use subrange repair, but generally subrange repairs are not recommended. A subrange repair does a portion of the data belonging to the node. Because the Merkle tree precision is fixed, this effectively increases the overall precision. To use subrange repair: 1. Use the Java describe_splits call to ask for a split containing 32K partitions. 2. Iterate throughout the entire range incrementally or in parallel. This completely eliminates the overstreaming behavior and wasted disk usage overhead. 3. Pass the tokens you received for the split to the nodetool repair -st (–start-token) and -et (–endtoken) options. 4. Pass the -local (–in-local-dc) option to nodetool to repair only within the local data center. This reduces the cross data-center transfer load. Repair guidelines Run repair in these situations: • Daily if you run incremental repairs, weekly if you run full repairs. • • • • Note: Even if deletions never occur, schedule regular repairs. Setting a column to null is a delete. During node recovery. For example, when bringing a node back into the cluster after a failure. On nodes containing data that is not read frequently. To update data on a node that has been down. To recover missing data or corrupted SSTables. A non-incremental is required. Guidelines for running routine node repair include: • • A full repair is recommended to eliminate the need for anticompaction. Migrating to incremental repairs is recommended if you use leveled compaction. 121 Operations • • • • The hard requirement for routine repair frequency is the value of gc_grace_seconds. Run a repair operation at least once on each node within this time period. Following this important guideline ensures that deletes are properly handled in the cluster. Use caution when running routine node repair on more than one node at a time and schedule regular repair operations for low-usage hours. In systems that seldom delete or overwrite data, you can raise the value of gc_grace_seconds with minimal impact to disk space. A higher value schedules wider intervals between repair operations. To mitigate heavy disk usage, configure nodetool compaction throttling options (setcompactionthroughput and setcompactionthreshold) before running a repair. Migrating to incremental repairs Migrating to incremental repairs by using the sstablerepaired set utility is recommended only under the following conditions: • • You are doing an incremental repair for the first time. You are using the leveled compaction strategy. Full, sequential repairs are the default because until the first incremental repair, Cassandra does not know the repaired state of SSTables. After an incremental repair, anticompaction marks SSTables as repaired or not. If you use the leveled compaction strategy and perform an incremental repair for the first time, Cassandra performs size-tiering on all SSTables because the repair/unrepaired status is unknown. This operation can take a long time. To save time, migrate to incremental repair one node at a time. The migration procedure, covered in the next section, uses utilities in the tools/bin directory of installations other than RHEL and Debian: • • sstablemetadata for checking the repaired or unrepaired status of an SSTable sstablerepairedset for manually marking an SSTable as repaired The syntax of these commands is: sstablemetadata <sstable filenames> sstablerepairedset [--is-repaired | --is-unrepaired] [-f <sstable-list> | <sstables>] In Cassandra 2.1.1, sstablerepairedset can take as arguments a list of SSTables on the command line or a file SSTables with a "-f" flag. Note: In RHEL and Debian installations, you must install the tools packages. This example shows how to use sstablerepairedset to clear the repaired state of an SSTable, rendering the SSTable unrepaired. 1. Stop the node. 2. Run this command: sstablerepairedset --is-unrepaired -f list_of_sstable_names.txt 3. Restart the node. All data is changed to an unrepaired state. Procedure for migrating to incremental repairs To migrate to incremental repair, one node at a time: 1. 2. 3. 4. Disable compaction on the node using nodetool disableautocompaction. Run the default full, sequential repair. Stop the node. Use the tool sstablerepairedset to mark all the SSTables that were created before you disabled compaction. 5. Restart cassandra 122 Operations SSTables remain in a repaired state after running a full, but not a partition range, repair if you make no changes to the SSTables. Adding or removing nodes, data centers, or clusters Adding nodes to an existing cluster Steps to add nodes when using virtual nodes. About this task Virtual nodes (vnodes) greatly simplify adding nodes to an existing cluster: • • Calculating tokens and assigning them to each node is no longer required. Rebalancing a cluster is no longer necessary because a node joining the cluster assumes responsibility for an even portion of the data. For a detailed explanation about how vnodes work, see Virtual nodes. If you are using racks, you can safely bootstrap two nodes at a time when both nodes are on the same rack. Note: If you do not use vnodes, use OpsCenter to add capacity. You can also use the instructions in the Cassandra 1.1 topic Adding Capacity to an Existing Cluster. Procedure 1. Install Cassandra on the new nodes, but do not start Cassandra. If you used the Debian install, Cassandra starts automatically and you must stop the node and clear the data. 2. Set the following properties in the cassandra.yaml and, depending on the snitch, the cassandratopology.properties or cassandra-rackdc.properties configuration files: • • • • • • auto_bootstrap - If this option has been set to false, you must set it to true. This option is not listed in the default cassandra.yaml configuration file and defaults to true. cluster_name - The name of the cluster the new node is joining. listen_address/broadcast_address - Can usually be left blank. Otherwise, use IP address or host name that other Cassandra nodes use to connect to the new node. endpoint_snitch - The snitch Cassandra uses for locating nodes and routing requests. num_tokens - The number of vnodes to assign to the node. If the hardware capabilities vary among the nodes in your cluster, you can assign a proportional number of vnodes to the larger machines. seed_provider - The -seeds list in this setting determines which nodes the new node should contact to learn about the cluster and establish the gossip process. Note: Seed nodes cannot bootstrap. Make sure the new node is not listed in the -seeds list. Do not make all nodes seed nodes. Please read Internode communications (gossip). • Change any other non-default settings you have made to your existing cluster in the cassandra.yaml file and cassandra-topology.properties or cassandrarackdc.properties files. Use the diff command to find and merge (by head) any differences between existing and new nodes. 3. Use nodetool status to verify that the node is fully bootstrapped and all other nodes are up (UN) and not in any other state. 4. After all new nodes are running, run nodetool cleanup on each of the previously existing nodes to remove the keys that no longer belong to those nodes. Wait for cleanup to complete on one node before running nodetool cleanup on the next node. Cleanup can be safely postponed for low-usage hours. 123 Operations Note: Consistency issues might result when more than one node is added at a time. To assess the risks to your environment, see JIRA issues CASSANDRA-2434 and CASSANDRA-7069. Although adding multiple nodes at the same time is not a best practice, you can reduce data consistency risks by following these steps: 1. Before you add the nodes, turn off consistent range movements with the Dconsistent.rangemovement=false property. Package installations Add the following option to the /usr/share/cassandra/cassandra-env.sh file: JVM_OPTS="$JVM_OPTS -Dconsistent.rangemovement=false Tarball installations Start Cassandra with this option: $ bin/cassandra -Dconsistent.rangemovement=false 2. Allow two minutes between node initializations. 3. After the nodes are added, turn consistent range movement back on. Adding a data center to a cluster Steps to add a data center to an existing cluster. Procedure 1. Ensure that you are using NetworkTopologyStrategy for all of your keyspaces. 2. For each node, set the following properties in the cassandra.yaml file: a) Add (or edit) auto_bootstrap: false. By default, this setting is true and not listed in the cassandra.yaml file. Setting this parameter to false prevents the new nodes from attempting to get all the data from the other nodes in the data center. When you run nodetool rebuild in the last step, each node is properly mapped. b) Set other properties, such as -seeds and endpoint_snitch, to match the cluster settings. For more guidance, see Initializing a multiple node cluster (multiple data centers). Note: Do not make all nodes seeds, see Internode communications (gossip). c) If you want to enable vnodes, set num_tokens. The recommended value is 256. Do not set the initial_token parameter. 3. Update the relevant property file for snitch used on all servers to include the new nodes. You do not need to restart. • • GossipingPropertyFileSnitch: cassandra-rackdc.properties PropertyFileSnitch: cassandra-topology.properties 4. Ensure that your clients are configured correctly for the new cluster: • • • If your client uses the DataStax Java, C#, or Python driver, set the load-balancing policy to DCAwareRoundRobinPolicy (Java, C#, Python). If you are using another client such as Hector, make sure it does not auto-detect the new nodes so that they aren't contacted by the client until explicitly directed. For example if you are using Hector, use sethostConfig.setAutoDiscoverHosts(false);. If you are using Astyanax, use ConnectionPoolConfigurationImpl.setLocalDatacenter("<data center name">) to ensure you are connecting to the specified data center. If you are using Astyanax 2.x, with integration with the DataStax Java Driver 2.0, you can set the load-balancing policy to DCAwareRoundRobinPolicy by calling JavaDriverConfigBuilder.withLoadBalancingPolicy(). AstyanaxContext<Keyspace> context = new AstyanaxContext.Builder() 124 Operations ... .withConnectionPoolConfiguration(new JavaDriverConfigBuilder() .withLoadBalancingPolicy(new TokenAwarePolicy(new DCAwareRoundRobinPolicy())) .build()) ... 5. If using a QUORUM consistency level for reads or writes, check the LOCAL_QUORUM or EACH_QUORUM consistency level to see if the level meets your requirements for multiple data centers. 6. Start Cassandra on the new nodes. 7. After all nodes are running in the cluster: a) Change the keyspace properties to specify the desired replication factor for the new data center. For example, set strategy options to DC1:2, DC2:2. For more information, see ALTER KEYSPACE. b) Run nodetool rebuild specifying the existing data center on all nodes in the new data center: nodetool rebuild -- name_of_existing_data_center Otherwise, requests to the new data center with LOCAL_ONE or ONE consistency levels may fail if the existing data centers are not completely in-sync. You can run rebuild on one or more nodes at the same time. The choices depends on whether your cluster can handle the extra IO and network pressure of running on multiple nodes. Running on one node at a time has the least impact on the existing cluster. Attention: If you don't specify the existing data center in the command line, the new nodes will appear to rebuild successfully, but will not contain any data. 8. Change to true or remove auto_bootstrap: false in the cassandra.yaml file. Returns this parameter to its normal setting so the nodes can get all the data from the other nodes in the data center if restarted. Replacing a dead node or dead seed node Steps to replace a node that has died for some reason, such as hardware failure. Replacing a dead seed node 1. Promote an existing node to a seed node by adding its IP address to -seeds list and remove (demote) the IP address of the dead seed node from the cassandra.yaml file for each node in the cluster. 2. Replace the dead node, as described in the next section. Replacing a dead node You must prepare and start the replacement node, integrate it into the cluster, and then remove the dead node. Procedure 1. Confirm that the node is dead using nodetool status: The nodetool command shows a down status for the dead node (DN): 2. Note the Address of the dead node; it is used in step 5. 125 Operations 3. Install Cassandra on the new node, but do not start Cassandra. If you used the Debian/Ubuntu install, Cassandra starts automatically and you must and stop the node and clear the data. 4. Set the following properties in the cassandra.yaml and, depending on the snitch, the cassandratopology.properties or cassandra-rackdc.properties configuration files: • • • • • • auto_bootstrap - If this option has been set to false, you must set it to true. This option is not listed in the default cassandra.yaml configuration file and defaults to true. cluster_name - The name of the cluster the new node is joining. listen_address/broadcast_address - Can usually be left blank. Otherwise, use IP address or host name that other Cassandra nodes use to connect to the new node. endpoint_snitch - The snitch Cassandra uses for locating nodes and routing requests. num_tokens - The number of vnodes to assign to the node. If the hardware capabilities vary among the nodes in your cluster, you can assign a proportional number of vnodes to the larger machines. seed_provider - The -seeds list in this setting determines which nodes the new node should contact to learn about the cluster and establish the gossip process. Note: Seed nodes cannot bootstrap. Make sure the new node is not listed in the -seeds list. Do not make all nodes seed nodes. Please read Internode communications (gossip). • Change any other non-default settings you have made to your existing cluster in the cassandra.yaml file and cassandra-topology.properties or cassandrarackdc.properties files. Use the diff command to find and merge (by head) any differences between existing and new nodes. 5. Start the replacement node with the replace_address option: • • Package installations: Add the following option to /usr/share/cassandra/cassandra-env.sh file: JVM_OPTS="$JVM_OPTS -Dcassandra.replace_address=address_of_dead_node Tarball installations: Start Cassandra with this option: $ sudo bin/cassandra -Dcassandra.replace_address=address_of_dead_node 6. If using a packaged install, after the new node finishes bootstrapping, remove the option you added in step 5. What to do next Remove the old node's IP address from the cassandra-topology.properties or cassandrarackdc.properties file Caution: Wait at least 72 hours to ensure that old node information is removed from gossip. If removed from the property file too soon, problems may result. Replacing a running node Steps to replace a node with a new node, such as when updating to newer hardware or performing proactive maintenance. About this task You must prepare and start the replacement node, integrate it into the cluster, and then decommision the old node. Note: To change the IP address of a node, simply change the IP of node and then restart Cassandra. If you change the IP address of a seed node, you must update the -seeds parameter in the seed_provider for each node in the cassandra.yaml file. 126 Operations Procedure 1. Prepare and start the replacement node, as described in Adding nodes to an existing cluster. Note: If not using vnodes, see Adding Capacity to an Existing Cluster in the Cassandra 1.1 documentation. 2. Confirm that the replacement node is alive: • • Run nodetool ring if not using vnodes. Run nodetool status if using vnodes. The status should show: • nodetool ring: Up • nodetool status: UN 3. Note the Host ID of the node; it is used in the next step. 4. Using the Host ID of the original node, decommission the original node from the cluster using the nodetool decommission command. Decommissioning a data center Steps to properly remove a data center so no information is lost. About this task Procedure 1. Make sure no clients are still writing to any nodes in the data center. 2. Run a full repair with nodetool repair. This ensures that all data is propagated from the data center being decommissioned. 3. Change all keyspaces so they no longer reference the data center being removed. 4. Run nodetool decommission on every node in the data center being removed. Removing a node Reduce the size of a data center. About this task Use these instructions when you want to remove nodes to reduce the size of your cluster, not for replacing a dead node. Attention: If you are not using virtual nodes (vnodes), you must rebalance the cluster. Procedure 1. Check whether the node is up or down using nodetool status: The nodetool command shows the status of the node (UN=up, DN=down): 2. If the node is up, run nodetool decommission. This assigns the ranges that the node was responsible for to other nodes and replicates the data appropriately. Use nodetool netstats to monitor the progress. 127 Operations 3. If the node is down: • • If the cluster uses vnodes, remove the node using the nodetool removenode command. If the cluster does not use vnodes, before running the nodetool removenode command, adjust your tokens to evenly distribute the data across the remaining nodes to avoid creating a hot spot. See the following in the Cassandra 1.1 documentation: • • About Data Partitioning in Cassandra Generating Tokens Switching snitches About this task Because snitches determine how Cassandra distributes replicas, the procedure to switch snitches depends on whether or not the topology of the cluster will change: • • If data has not been inserted into the cluster, there is no change in the network topology. This means that you only need to set the snitch; no other steps are necessary. If data has been inserted into the cluster, it's possible that the topology has changed and you will need to perform additional steps. A change in topology means that there is a change in the data centers and/or racks where the nodes are placed. Topology changes may occur when the replicas are placed in different places by the new snitch. Specifically, the replication strategy places the replicas based on the information provided by the new snitch. The following examples demonstrate the differences: • No topology change • Suppose you have 5 nodes using the SimpleSnitch in a single data center and you change to 5 nodes in 1 data center and 1 rack using a network snitch such as the GossipingPropertyFileSnitch. Topology change Suppose you have 5 nodes using the SimpleSnitch in a single data center and you change to 5 nodes in 2 data centers using the PropertyFileSnitch. • Note: If splitting from one data center to two, you need to change the schema for the keyspace that are splitting. Additionally, the data center names must change accordingly. Topology change Suppose you have 5 nodes using the SimpleSnitch in a single data center and you change to 5 nodes in 1 data center and 2 racks using the RackInferringSnitch. The configuration files for snitches are located in: • • Tarball installations: install_location/conf Package installations: /etc/cassandra Procedure 1. Create a properties file with data center and rack information. • cassandra-rackdc.properties - GossipingPropertyFileSnitch, EC2Snitch, and EC2MultiRegionSnitch only • cassandra-topology.properties - all other network snitches 2. Copy the cassandra-topology.properties or cassandra-rackdc.properties file to the Cassandra configuration directory on all the cluster's nodes. They won't be used until the new snitch is enabled. 3. Change the snitch for each node in the cluster in the node's cassandra.yaml file. For example: endpoint_snitch: GossipingPropertyFileSnitch 128 Operations 4. If the topology has not changed, you can restart each node one at a time. Any change in the cassandra.yaml file requires a node restart. 5. If the topology of the network has changed: a) Shut down all the nodes, then restart them. b) Run a sequential repair and nodetool cleanup on each node. Edge cases for transitioning or migrating a cluster Unusual migration scenarios without interruption of service. About this task The information in this topic is intended for the following types of scenarios (without any interruption of service): • • • Transition a cluster on EC2 to a cluster on Amazon virtual private cloud (VPC). Migrate from a cluster when the network separates the current cluster from the future location. Migrate from an early Cassandra cluster to a recent major version. Procedure The following method ensures that if something goes wrong with the new cluster, you still have the existing cluster until you no longer need it. 1. Set up and configure the new cluster as described in Provisioning a new cluster. Note: If you're not using vnodes, be sure to configure the token ranges in the new nodes to match the ranges in the old cluster. 2. Set up the schema for the new cluster using CQL. 3. Configure your client to write to both clusters. Depending on how the writes are done, code changes may be needed. Be sure to use identical consistency levels. 4. Ensure that the data is flowing to the new nodes so you won't have any gaps when you copy the snapshots to the new cluster in step 6. 5. Snapshot the old EC2 cluster. 6. Copy the data files from your keyspaces to the nodes. • If not using vnodes and the if the node ratio is 1:1, it's simpler and more efficient to simply copy the data files to their matching nodes. • If the clusters are different sizes or if you are using vnodes, use the Cassandra bulk loader (sstableloader) (sstableloader). 7. You can either switch to the new cluster all at once or perform an incremental migration. For example, to perform an incremental migration, you can set your client to designate a percentage of the reads that go to the new cluster. This allows you to test the new cluster before decommissioning the old cluster. 8. Decommission the old cluster: a) Remove the cluster from the OpsCenter. b) Remove the nodes. 129 Backing up and restoring data Backing up and restoring data Cassandra backs up data by taking a snapshot of all on-disk data files (SSTable files) stored in the data directory. You can take a snapshot of all keyspaces, a single keyspace, or a single table while the system is online. Using a parallel ssh tool (such as pssh), you can snapshot an entire cluster. This provides an eventually consistent backup. Although no one node is guaranteed to be consistent with its replica nodes at the time a snapshot is taken, a restored snapshot resumes consistency using Cassandra's built-in consistency mechanisms. After a system-wide snapshot is performed, you can enable incremental backups on each node to backup data that has changed since the last snapshot: each time an SSTable is flushed, a hard link is copied into a /backups subdirectory of the data directory (provided JNA is enabled). Note: If JNA is enabled, snapshots are performed by hard links. If not enabled, I/O activity increases as the files are copied from one location to another, which significantly reduces efficiency. Taking a snapshot About this task Snapshots are taken per node using the nodetool snapshot command. To take a global snapshot, run the nodetool snapshot command using a parallel ssh utility, such as pssh. A snapshot first flushes all in-memory writes to disk, then makes a hard link of the SSTable files for each keyspace. You must have enough free disk space on the node to accommodate making snapshots of your data files. A single snapshot requires little disk space. However, snapshots can cause your disk usage to grow more quickly over time because a snapshot prevents old obsolete data files from being deleted. After the snapshot is complete, you can move the backup files to another location if needed, or you can leave them in place. Note: Cassandra can only restore data from a snapshot when the table schema exists. It is recommended that you also backup the schema. Procedure Run the nodetool snapshot command, specifying the hostname, JMX port, and keyspace. For example: $ nodetool -h localhost -p 7199 snapshot mykeyspace Results The snapshot is created in data_directory_location/keyspace_name/table_name-UUID/ snapshots/snapshot_name directory. Each snapshot directory contains numerous .db files that contain the data at the time of the snapshot. For example: Package installations: /var/lib/cassandra/data/mykeyspace/users-081a1500136111e482d09318a3b15cc2/ snapshots/1406227071618/mykeyspace-users-ka-1-Data.db Tarball installations: install_location/data/data/mykeyspace/users-081a1500136111e482d09318a3b15cc2/ snapshots/1406227071618/mykeyspace-users-ka-1-Data.db 130 Backing up and restoring data Deleting snapshot files About this task When taking a snapshot, previous snapshot files are not automatically deleted. You should remove old snapshots that are no longer needed. The nodetool clearsnapshot command removes all existing snapshot files from the snapshot directory of each keyspace. You should make it part of your back-up process to clear old snapshots before taking a new one. Procedure To delete all snapshots for a node, run the nodetool clearsnapshot command. For example: $ nodetool -h localhost -p 7199 clearsnapshot To delete snapshots on all nodes at once, run the nodetool clearsnapshot command using a parallel ssh utility. Enabling incremental backups About this task When incremental backups are enabled (disabled by default), Cassandra hard-links each flushed SSTable to a backups directory under the keyspace data directory. This allows storing backups offsite without transferring entire snapshots. Also, incremental backups combine with snapshots to provide a dependable, up-to-date backup mechanism. As with snapshots, Cassandra does not automatically clear incremental backup files. DataStax recommends setting up a process to clear incremental backup hard-links each time a new snapshot is created. Procedure Edit the cassandra.yaml configuration file on each node in the cluster and change the value of incremental_backups to true. Restoring from a Snapshot About this task Restoring a keyspace from a snapshot requires all snapshot files for the table, and if using incremental backups, any incremental backup files created after the snapshot was taken. Generally, before restoring a snapshot, you should truncate the table. If the backup occurs before the delete and you restore the backup after the delete without first truncating, you do not get back the original data (row). Until compaction, the tombstone is in a different SSTable than the original row, so restoring the SSTable containing the original row does not remove the tombstone and the data still appears to be deleted. Cassandra can only restore data from a snapshot when the table schema exists. If you have not backed up the schema, you can do the either of the following: • Method 1 131 Backing up and restoring data • 1. Restore the snapshot, as described below. 2. Recreate the schema. Method 2 1. Recreate the schema. 2. Restore the snapshot, as described below. 3. Run nodetool refresh. Procedure You can restore a snapshot in several ways: • Use the sstableloader tool. • Copy the snapshot SSTable directory (see Taking a snapshot) to the data/keyspace/table_name-UUID directory and then call the JMX method loadNewSSTables() in the column family MBean for each column family through JConsole. You can use nodetool refresh instead of the loadNewSSTables() call. The location of the data directory depends on the type of installation: • • Package installations: /var/lib/cassandra/data • Tarball installations: install_location/data/data Use the Node Restart Method described below. Node restart method About this task If restoring a single node, you must first shutdown the node. If restoring an entire cluster, you must shut down all nodes, restore the snapshot data, and then start all nodes again. Note: Restoring from snapshots and incremental backups temporarily causes intensive CPU and I/ O activity on the node being restored. Procedure 1. Shut down the node. 2. Clear all files in the commitlog directory. • • Package installations: /var/lib/cassandra/commitlog Tarball installations: install_location/data/commitlog This prevents the commitlog replay from putting data back, which would defeat the purpose of restoring data to a particular point in time. 3. Delete all *.db files in data_directory_location/keyspace_name/table_name-UUID directory, but DO NOT delete the /snapshots and /backups subdirectories. where data_directory_location is • • Package installations: /var/lib/cassandra/data Tarball installations: install_location/data/data 4. Locate the most recent snapshot folder in this directory: data_directory_location/keyspace_name/table_name-UUID/ snapshots/snapshot_name 5. Copy its contents into this directory: data_directory_location/keyspace_name/table_name-UUID directory. 6. If using incremental backups, copy all contents of this directory: 132 Backing up and restoring data data_directory_location/keyspace_name/table_name-UUID/backups 7. Paste it into this directory: data_directory_location/keyspace_name/table_name-UUID 8. Restart the node. Restarting causes a temporary burst of I/O activity and consumes a large amount of CPU resources. 9. Run nodetool repair. Restoring a snapshot into a new cluster About this task Suppose you want to copy a snapshot of SSTable data files from a three node Cassandra cluster with vnodes enabled (256 tokens) and recover it on another newly created three node cluster (256 tokens). The token ranges will not match so you need to specify the tokens for the new cluster that were used in the old cluster. Note: This procedure assumes you are familiar with restoring a snapshot and configuring and initializing a cluster. If not, see Initializing a cluster. Procedure To recover the snapshot on the new cluster: 1. From the old cluster, retrieve the list of tokens associated with each node's IP: $ nodetool ring | grep ip_address_of_node | awk '{print $NF ","}' | xargs 2. In the cassandra.yaml file for each node in the new cluster, add the list of tokens you obtained in the previous step to the initial_token parameter using the same num_tokens setting as in the old cluster. 3. Make any other necessary changes in the cassandra.yaml and property files so that the new nodes match the old cluster settings. 4. Clear the system table data from each new node: $ sudo rm -rf /var/lib/cassandra/data/system/* This allows the new nodes to use the initial tokens defined in the cassandra.yaml when they restart. 5. Restore the SSTable files snapshotted from the old cluster onto the new cluster using the same directories. Otherwise the new cluster does not have data to read in when you restart the nodes. 6. Start each node using the specified list of token ranges in cassandra.yaml: initial_token: -9211270970129494930, -9138351317258731895, -8980763462514965928, ... This allows Cassandra to read the SSTable snapshot from the old cluster. 133 Cassandra tools Cassandra tools The nodetool utility A command line interface for managing a cluster. Command format • • • Package installations: nodetool [(-h <host> | --host <host>)] [(-p <port> | --port <port>)] [(-pwf <passwordFilePath> | --password-file <passwordFilePath>)] [(-u <username> | --username <username>)] [(-pw <password> | --password <password>)] <command> [<args>] Tarball installations: Execute the command from install_location/bin If a username and password for RMI authentication are set explicitly in the cassandra-env.sh file for the host, then you must specify credentials. The repair and rebuild commands can affect multiple nodes in the cluster. Most nodetool commands operate on a single node in the cluster if -h is not used to identify one or more other nodes. If the node from which you issue the command is the intended target, you do not need the -h option to identify the target; otherwise, for remote invocation, identify the target node, or nodes, using -h. cfhistograms Provides statistics about a table that could be used to plot a frequency function. Synopsis nodetool <options> cfhistograms -- <keyspace> <table> • options are: • • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option from an argument that could be mistaken for a option. keyspace is the name of a keyspace. table is the name of a table. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description The nodetool cfhistograms command provides statistics about a table, including read/write latency, partition size, column count, and number of SSTables. The report covers all operations since the last time 134 Cassandra tools you ran nodetool cfhistograms in this session. The use of the metrics-core library in Cassandra 2.1 makes the output more informative and easier to understand. Example For example, to get statistics about the libout table in the libdata keyspace on Linux, use this command: $ install_location/bin/nodetool cfhistograms libdata libout Output is: libdata/libout histograms Percentile SSTables Write Latency Cell Count (micros) 50% Read Latency Partition Size (micros) (bytes) 0.00 39.50 36.00 1597 0.00 49.00 55.00 1597 0.00 95.00 82.00 8239 0.00 126.84 110.42 17084 0.00 155.13 123.71 24601 0.00 3.00 3.00 1110 0.00 50772.00 314.00 126934 42 75% 42 95% 258 98% 446 99% 770 Min 36 Max 3973 The output shows the percentile rank of read and write latency values, the partition size, and the cell count for the table. cfstats Provides statistics about tables. Synopsis nodetool <options> cfstats -i -- (<keyspace>.<table> ... ) -H • • • • • options are: • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option from an argument that could be mistaken for a option. i ignores the following tables, providing only information about other Cassandra tables keyspace.table is one or more keyspace and table names in dot notation. H converts bytes to a human readable form: kilobytes (KB), megabytes (MB), gigabytes (GB), or terabytes (TB). (Cassandra 2.1.1) Synopsis Legend • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable 135 Cassandra tools • Orange ( and ) means not literal, indicates scope Description The nodetool cfstats command provides statistics about one or more tables. You use dot notation to specify one or more keyspace and table names. If you do not specify a keyspace and table, Cassandra provides statistics about all tables. If you use the -i option, Cassandra provides statistics about all tables except the given ones. The use of the metrics-core library in Cassandra 2.1 makes the output more informative and easier to understand. This table describes the nodetool cfstats output. Table 11: nodetool cfstats output 136 Name of statistic Example value Brief description Related information Keyspace libdata Name of the keyspace Keyspace and table Read count 11207 Number of requests to read tables in the libdata keyspace since startup Read latency 0.047. . . ms Latency reading the tables in the libdata keyspace OpsCenter alert metrics Write count 17598 Number of requests to update tables in the libdata keyspace since startup Same as above Write latency 0.053. . . ms Latency Same as above writing tables in the libdata keyspace Pending tasks 0 Tasks in the OpsCenter pending task metrics queue for reads, writes, and cluster operations of tables in the keyspace Table libout Name of the Cassandra table SSTable count 3 Number of SSTables How to use the SSTable counts metric and OpsCenter alert metrics Cassandra tools Name of statistic Example value Brief description Related information containing data from the table Space used (live), bytes: 9592399 Space used by the table (depends on operating system) Advanced system alert metrics Space used (total), bytes: 9592399 Same as above Same as above Space used by snapshots (total), bytes: 0 Same occupied by backup data SSTable compression ratio 0.367. . . Fraction Types of compression option) of datarepresentation size resulting from compression Memtable cell count 1022550 Number of Cassandra memtable structure in memory cells (storage engine rows x columns) of data in the memtable Memtable data size, bytes 32028148 Size of the memtable data Same as above Memtable switch 3 count Number of times a full memtable was swapped for an empty one (Increases each time the memtable for a table is flushed to disk) How memtables are measured article Local read count 11207 Number of local read requests for the libout table since startup OpsCenter alert documentation 137 Cassandra tools 138 Name of statistic Example value Brief description Related information Local read latency 0.048 ms Round trip time in milliseconds to complete a request to read the libout table Factors that affect read latency Local write count 17598 Number of local requests to update the libout the table since startup OpsCenter alert documentation Local write latency 0.054 ms Round trip time in milliseconds to complete an update to the libout table Factors that affect write latency Pending tasks 0 Number of read, write, and cluster operations that are pending OpsCenter pending task metrics documentation Bloom filter false 0 positives Number of false positives, which occur when the bloom filter said the row existed, but it actually did not exist in absolute numbers Tuning bloom filters Bloom filter false 0.00000 ratio Fraction of Same as above all bloom filter checks resulting in a false positive Bloom filter space used, bytes Size of bytes Same as above of the bloom filter data 11688 Cassandra tools Name of statistic Example value Brief description Related information Compacted partition minimum bytes 1110 Lower size limit for the partition being compacted in memory Used to calculate what the approximate row cache size should be. Multiply the reported row cache size, which is the number of rows in the cache, by the compacted row mean size for every table and sum them. Compacted partition maximum bytes 126934 Upper size limit for compacted table rows. Configurable in the cassandra.yaml in_memory_compaction _limit_in_mb Compacted partition mean bytes 2730 The average size of compacted table rows Average live cells per slice (last five minutes) 0.0 Average of cells scanned by single key queries during the last five minutes Average tombstones per slice (last five minutes) 0.0 Average of tombstones scanned by single key queries during the last five minutes Examples This example shows an excerpt of the output of the command after flushing a table of library data to disk. nodetool cfstats libdata.libout Keyspace: libdata Read Count: 11207 Read Latency: 0.047931114482020164 ms. Write Count: 17598 Write Latency: 0.053502954881236506 ms. Pending Flushes: 0 Table: libout SSTable count: 3 Space used (live), bytes: 9088955 Space used (total), bytes: 9088955 Space used by snapshots (total), bytes: 0 SSTable Compression Ratio: 0.36751363892150946 Memtable cell count: 0 Memtable data size, bytes: 0 Memtable switch count: 3 Local read count: 11207 Local read latency: 0.048 ms Local write count: 17598 139 Cassandra tools Local write latency: 0.054 ms Pending flushes: 0 Bloom filter false positives: 0 Bloom filter false ratio: 0.00000 Bloom filter space used, bytes: 11688 Compacted partition minimum bytes: 1110 Compacted partition maximum bytes: 126934 Compacted partition mean bytes: 2730 Average live cells per slice (last five minutes): 0.0 Average tombstones per slice (last five minutes): 0.0 Using the human-readable option Using the human-readable -H option (Cassandra 1.1.1) provides output in easier-to-read units than bytes. For example: nodetool cfstats demodb.nhanes -H Keyspace: demodb Read Count: 0 Read Latency: NaN ms. Write Count: 20050 Write Latency: 0.08548014962593516 ms. Pending Flushes: 0 Table: nhanes SSTable count: 1 Space used (live): 13.75 MB Space used (total): 13.75 MB Space used by snapshots (total): 0 bytes SSTable Compression Ratio: 0.3064650643762481 Memtable cell count: 0 Memtable data size: 0 bytes Memtable switch count: 1 Local read count: 0 Local read latency: NaN ms Local write count: 20050 Local write latency: 0.085 ms Pending flushes: 0 Bloom filter false positives: 0 Bloom filter false ratio: 0.00000 Bloom filter space used: 23.73 KB Compacted partition minimum bytes: 1.87 KB Compacted partition maximum bytes: 2.69 KB Compacted partition mean bytes: 2.26 KB Average live cells per slice (last five minutes): Maximum live cells per slice (last five minutes): Average tombstones per slice (last five minutes): Maximum tombstones per slice (last five minutes): 0.0 0.0 0.0 0.0 ---------------- cleanup Cleans up keyspaces and partition keys no longer belonging to a node. Synopsis nodetool <options> cleanup -• options are: • • • • 140 <keyspace> (<table> ...) ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> Cassandra tools • • • • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option from an argument that could be mistaken for a option. keyspace is a keyspace name. table is one or more table names, separated by a space. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Use this command to remove unwanted data after adding a new node to the cluster. Cassandra does not automatically remove data from nodes that lose part of their partition range to a newly added node. Run nodetool cleanup on the source node and on neighboring nodes that shared the same subrange after the new node is up and running. Failure to run this command after adding a node causes Cassandra to include the old data to rebalance the load on that node. Running the nodetool cleanup command causes a temporary increase in disk space usage proportional to the size of your largest SSTable. Disk I/O occurs when running this command. Running this command affects nodes that use a counter column in a table. Cassandra assigns a new counter ID to the node. Optionally, this command takes a list of table names. If you do not specify a keyspace, this command cleans all keyspaces no longer belonging to a node. clearsnapshot Removes one or more snapshots. Synopsis nodetool <options> clearsnapshot -t <snapshot> -- ( <keyspace> ... ) • options are: • • • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -t means the following file contains the snapshot. snapshot is the name of the snapshot. -- separates an option from an argument that could be mistaken for a option. keyspace is one or more keyspace names, separated by a space. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope 141 Cassandra tools Description Deletes snapshots in one or more keyspaces. To remove all snapshots, omit the snapshot name. compact Forces a major compaction on one or more tables. Synopsis nodetool <options> compact <keyspace> ( <table> ... ) • options are: • • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. keyspace is the name of a keyspace. table is one or more table names, separated by a space. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description This command starts the compaction process on tables that use the SizeTieredCompactionStrategy and DateTieredCompactionStrategy. You can specify a keyspace for compaction. If you do not specify a keyspace, the nodetool command uses the current keyspace. You can specify one or more tables for compaction. If you do not specify any tables, compaction of all tables in the keyspace occurs. This is called a major compaction. If you do specify one or more tables, compaction of the specified tables occurs. This is called a minor compaction. A major compaction combines each of the pools of repaired and unrepaired SSTables into one repaired and one unreparied SSTable. During compaction, there is a temporary spike in disk space usage and disk I/O because the old and new SSTables co-exist. A major compaction can cause considerable disk I/O. compactionhistory Provides the history of compaction operations. Synopsis $ nodetool <options> compactionhistory options are: • • • • • 142 ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Cassandra tools Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Example The actual output of compaction history is seven columns wide. The first three columns show the id, keyspace name, and table name of the compacted SSTable. $ nodetool compactionhistory Compaction History: id d06f7080-07a5-11e4-9b36-abc3a0ec9088 schema_columnfamilies d198ae40-07a5-11e4-9b36-abc3a0ec9088 0381bc30-07b0-11e4-9b36-abc3a0ec9088 74eb69b0-0621-11e4-9b36-abc3a0ec9088 e35dd980-07ae-11e4-9b36-abc3a0ec9088 compactions_in_progress 8d5cf160-07ae-11e4-9b36-abc3a0ec9088 compactions_in_progress ba376020-07af-11e4-9b36-abc3a0ec9088 d18cc760-07a5-11e4-9b36-abc3a0ec9088 64009bf0-07a4-11e4-9b36-abc3a0ec9088 d04700f0-07a5-11e4-9b36-abc3a0ec9088 c2a97370-07a9-11e4-9b36-abc3a0ec9088 cb928a80-07ae-11e4-9b36-abc3a0ec9088 cd8d1540-079e-11e4-9b36-abc3a0ec9088 62ced2b0-07a4-11e4-9b36-abc3a0ec9088 d19cccf0-07a5-11e4-9b36-abc3a0ec9088 compactions_in_progress 640bbf80-07a4-11e4-9b36-abc3a0ec9088 6cd54e60-07ae-11e4-9b36-abc3a0ec9088 c29241f0-07a9-11e4-9b36-abc3a0ec9088 c2a30ad0-07a9-11e4-9b36-abc3a0ec9088 compactions_in_progress e3a6d920-079d-11e4-9b36-abc3a0ec9088 62c55cd0-07a4-11e4-9b36-abc3a0ec9088 schema_columnfamilies 62b07540-07a4-11e4-9b36-abc3a0ec9088 cdd038c0-079e-11e4-9b36-abc3a0ec9088 b797af00-07af-11e4-9b36-abc3a0ec9088 8c918b10-07ae-11e4-9b36-abc3a0ec9088 377d73f0-07ae-11e4-9b36-abc3a0ec9088 compactions_in_progress 62b9c410-07a4-11e4-9b36-abc3a0ec9088 d0566a40-07a5-11e4-9b36-abc3a0ec9088 ba637930-07af-11e4-9b36-abc3a0ec9088 compactions_in_progress cdbc1480-079e-11e4-9b36-abc3a0ec9088 schema_columnfamilies e3456f80-07ae-11e4-9b36-abc3a0ec9088 d086f020-07a5-11e4-9b36-abc3a0ec9088 d06118a0-07a5-11e4-9b36-abc3a0ec9088 cdaafd80-079e-11e4-9b36-abc3a0ec9088 640fde30-07a4-11e4-9b36-abc3a0ec9088 compactions_in_progress keyspace_name system columnfamily_name libdata Keyspace1 system system users Standard1 local system Keyspace1 libdata libdata system libdata Keyspace1 system system system Standard1 libout libout sstable_activity users Standard1 schema_columns schema_keyspaces libdata Keyspace1 libdata system users Standard1 libout system system schema_keyspaces system system Keyspace1 Keyspace1 system schema_columns schema_keyspaces Standard1 Standard1 system system system local schema_columns system Keyspace1 system system system system Standard1 schema_keyspaces local local 143 Cassandra tools 37638350-07ae-11e4-9b36-abc3a0ec9088 Keyspace1 Standard1 The four columns to the right of the table name show the timestamp, size of the SSTtable before and after compaction, and the number of partitions merged. The notation means {tables:rows}. For example: {1:3, 3:1} means 3 rows were taken from one SSTable (1:3) and 1 row taken from 3 SSTables (3:1) to make the one SSTable in that compaction operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . compacted_at 1404936947592 1404936949540 1404941328243 1404770149323 1404940844824 1404940700534 1404941205282 1404936949462 1404936336175 1404936947327 1404938642471 1404940804904 1404933936276 1404936334171 1404936949567 1404936336248 1404940645958 1404938642319 1404938642429 1404933543858 1404936334109 1404936333972 1404933936715 1404941200880 1404940699201 1404940556463 1404936334033 1404936947428 1404941205571 1404933936584 1404940844664 1404936947746 1404936947498 1404933936472 1404936336275 1404940556293 bytes_in 8096 144 1305838191 5864 573 576 766331398 8901649 8900821 223 144 383020422 4889 441 379 144 307520780 8901649 416 692 7760 4860 441 1269180898 297639696 592 5760 8413 429 7994 306699417 601 5840 5861 378 302170540 bytes_out 7211 144 1305838191 5701 148 155 766331398 8901649 8900821 108 144 383020422 4177 281 79 144 307520780 8901649 165 281 7186 4724 281 1003196133 297639696 148 5680 5316 42 6789 306699417 281 5680 5680 80 281000000 rows_merged {1:3, 3:1} {1:1} {1:4647111} {4:1} {1:1, 2:2} {1:1, 2:2} {1:2727158} {1:9315} {1:9315} {1:3, 2:1} {1:1} {1:1363062} {1:4} {1:3, 2:1} {2:2} {1:1} {1:1094380} {1:9315} {1:3, 2:1} {1:3, 2:1} {1:3, 2:1} {1:2, 2:1} {1:3, 2:1} {1:2623528, 2:946565} {1:1059216} {1:2, 2:2} {2:1} {1:2, 3:1} {2:2} {1:4} {1:1091457} {1:3, 3:1} {3:1} {3:1} {2:2} {1:924660, 2:75340} compactionstats Provide statistics about a compaction. Synopsis nodetool <options> compactionstats -H 144 • options are: • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. data center is the name of an arbitrarily chosen data center from which to select sources for streaming. Cassandra tools • H converts bytes to a human readable form: kilobytes (KB), megabytes (MB), gigabytes (GB), or terabytes (TB). (Cassandra 2.1.1) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description The total column shows the total number of uncompressed bytes of SSTables being compacted. The system log lists the names of the SSTables compacted. Example $ bin/nodetool compactionstats pending tasks: 5 compaction type keyspace total unit progress Compaction Keyspace1 302170540 bytes 93.43% Compaction Keyspace1 307520780 bytes 19.01% Active compaction remaining time : 0h00m16s table completed Standard1 282310680 Standard1 58457931 decommission Deactivates a node by streaming its data to another node. Synopsis nodetool <options> decommission options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Causes a live node to decommission itself, streaming its data to the next node on the ring. Use netstats to monitor the progress, as described on http://wiki.apache.org/cassandra/NodeProbe#Decommission and http://wiki.apache.org/cassandra/Operations#Removing_nodes_entirely. 145 Cassandra tools describecluster Provide the name, snitch, partitioner and schema version of a cluster Synopsis nodetool <options> describecluster -- <data center> • options are: • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. data center is the name of an arbitrarily chosen data center from which to select sources for streaming. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Describe cluster is typically used to validate the schema after upgrading. If a schema disagreement occurs, check for and resolve schema disagreements. Example $ bin/nodetool describecluster Cluster Information: Name: Test Cluster Snitch: org.apache.cassandra.locator.DynamicEndpointSnitch Partitioner: org.apache.cassandra.dht.Murmur3Partitioner Schema versions: 65e78f0e-e81e-30d8-a631-a65dff93bf82: [127.0.0.1] If a schema disagreement occurs, the last line of the output includes information about unreachable nodes. $ bin/nodetool describecluster Cluster Information: Name: Production Cluster Snitch: org.apache.cassandra.locator.DynamicEndpointSnitch Partitioner: org.apache.cassandra.dht.Murmur3Partitioner Schema versions: UNREACHABLE: 1176b7ac-8993-395d-85fd-41b89ef49fbb: [10.202.205.203] describering Provides the partition ranges of a keyspace. Synopsis nodetool <options> describering -- <keyspace> • 146 options are: Cassandra tools • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option from an argument that could be mistaken for a option. keyspace is a keyspace name. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Example This example shows the sample output of the command on a three-node cluster. $ nodetool describering demo_keyspace Schema Version:1b04bd14-0324-3fc8-8bcb-9256d1e15f82 TokenRange: TokenRange(start_token:3074457345618258602, end_token:-9223372036854775808, endpoints:[127.0.0.1, 127.0.0.2, 127.0.0.3], rpc_endpoints:[127.0.0.1, 127.0.0.2, 127.0.0.3], endpoint_details:[EndpointDetails(host:127.0.0.1, datacenter:datacenter1, rack:rack1), EndpointDetails(host:127.0.0.2, datacenter:datacenter1, rack:rack1), EndpointDetails(host:127.0.0.3, datacenter:datacenter1, rack:rack1)]) TokenRange(start_token:-3074457345618258603, end_token:3074457345618258602, endpoints:[127.0.0.3, 127.0.0.1, 127.0.0.2], rpc_endpoints:[127.0.0.3, 127.0.0.1, 127.0.0.2], endpoint_details:[EndpointDetails(host:127.0.0.3, datacenter:datacenter1, rack:rack1), EndpointDetails(host:127.0.0.1, datacenter:datacenter1, rack:rack1), EndpointDetails(host:127.0.0.2, datacenter:datacenter1, rack:rack1)]) TokenRange(start_token:-9223372036854775808, end_token:-3074457345618258603, endpoints:[127.0.0.2, 127.0.0.3, 127.0.0.1], rpc_endpoints:[127.0.0.2, 127.0.0.3, 127.0.0.1], endpoint_details:[EndpointDetails(host:127.0.0.2, datacenter:datacenter1, rack:rack1), EndpointDetails(host:127.0.0.3, datacenter:datacenter1, rack:rack1), EndpointDetails(host:127.0.0.1, datacenter:datacenter1, rack:rack1)]) If a schema disagreement occurs, the last line of the output includes information about unreachable nodes. $ bin/nodetool describecluster Cluster Information: Name: Production Cluster Snitch: org.apache.cassandra.locator.DynamicEndpointSnitch Partitioner: org.apache.cassandra.dht.Murmur3Partitioner Schema versions: UNREACHABLE: 1176b7ac-8993-395d-85fd-41b89ef49fbb: [10.202.205.203] 147 Cassandra tools disableautocompaction Disables autocompaction for a keyspace and one or more tables. Synopsis nodetool <options> disableautocompaction -- <keyspace> ( <table> ... ) • options are: • • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. keyspace is the name of a keyspace. table is one or more table names, separated by a space. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description The keyspace can be followed by one or more tables. disablebackup Disables incremental backup. Synopsis nodetool <options> disablebackup options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • 148 Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Cassandra tools disablebinary Disables the native transport. Synopsis nodetool <options> disablebinary options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Disables the binary protocol, also known as the native transport. disablegossip Disables the gossip protocol. Synopsis nodetool <options> disablegossip options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description This command effectively marks the node as being down. 149 Cassandra tools disablehandoff Disables storing of future hints on the current node. Synopsis nodetool <options> disablehandoff options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope disablethrift Disables the Thrift server. Synopsis nodetool <options> disablethrift options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope drain Drains the node. Synopsis nodetool <options> drain options are: • • 150 ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> Cassandra tools • • • ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Flushes all memtables from the node to SSTables on disk. Cassandra stops listening for connections from the client and other nodes. You need to restart Cassandra after running nodetool drain. You typically use this command before upgrading a node to a new version of Cassandra. To simply flush memtables to disk, use nodetool flush. enableautocompaction Enables autocompaction for a keyspace and one or more tables. Synopsis nodetool <options> enableautocompaction -- <keyspace> ( <table> ... ) • options are: • • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. keyspace is the name of a keyspace. table is the name of one or more keyspaces, separated by a space. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description The keyspace can be followed by one or more tables. Enables compaction for the named keyspace or the current keyspace, and one or more named tables, or all tables. enablebackup Enables incremental backup. Synopsis nodetool <options> enablebackup 151 Cassandra tools options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope enablebinary Re-enables native transport. Synopsis nodetool <options> enablebinary options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Re-enables the binary protocol, also known as native transport. enablegossip Re-enables gossip. Synopsis nodetool <options> enablegossip options are: • • • • • 152 ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Cassandra tools Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope enablehandoff Re-enables the storing of future hints on the current node. Synopsis nodetool <options> enablehandoff options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope enablethrift Re-enables the Thrift server. Synopsis nodetool <options> enablethrift options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope 153 Cassandra tools flush Flushes one or more tables from the memtable. Synopsis nodetool <options> flush -- <keyspace> ( <table> ... ) • options are: • • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. keyspace is the name of a keyspace. table is the name of one or more tables, separated by a space. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description You can specify a keyspace followed by one or more tables that you want to flush from the memtable to SSTables on disk. getcompactionthreshold Provides the minimum and maximum compaction thresholds in megabytes for a table. Synopsis nodetool <options> getcompactionthreshold -- <keyspace> <table> • options are: • • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. keyspace is the name of a keyspace. table is the name of a table. Synopsis Legend • • • • • 154 Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Cassandra tools getendpoints Provides the IP addresses or names of replicas that own the partition key. Synopsis nodetool <options> getendpoints -- <keyspace> <table> key • options are: • • • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. keyspace is a keyspace name. table is a table name. key is the partition key of the end points you want to get. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Example For example, which nodes own partition key_1, key_2, and key_3? $ bin/nodetool -h 127.0.0.1 -p 7100 getendpoints myks mytable key_1 127.0.0.2 $ bin/nodetool -h 127.0.0.1 -p 7100 getendpoints myks mytable key_2 127.0.0.2 $ bin/nodetool -h 127.0.0.1 -p 7100 getendpoints myks mytable key_3 127.0.0.1 getlogginglevels Get the runtime logging levels. Synopsis nodetool <options> getlogginglevels options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password> ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR 155 Cassandra tools • • Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope getsstables Provides the SSTables that own the partition key. Synopsis nodetool <options> getsstables -- <keyspace> <table> key • options are: • • • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. keyspace is a keyspace name. table is a table name. key is the partition key of the SSTables. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope getstreamthroughput Provides the megabytes per second throughput limit for streaming in the system. Synopsis nodetool <options> getstreamthroughput options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • 156 Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Cassandra tools gossipinfo Provides the gossip information for the cluster. Synopsis nodetool <options> gossipinfo options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope help Provides nodetool command help. Synopsis nodetool help <command> Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Using this command without the The help command provides a synopsis and brief description of each nodetool command. Examples Using nodetool help lists all commands and usage information. For example, nodetool help netstats provides the following information. NAME nodetool netstats - Print network information on provided host (connecting node by default) SYNOPSIS nodetool [(-h <host> | --host <host>)] [(-p <port> | --port <port>)] [(-pw <password> | --password <password>)] [(-u <username> | --username <username>)] netstats OPTIONS 157 Cassandra tools -h <host>, --host <host> Node hostname or ip address -p <port>, --port <port> Remote jmx agent port number -pw <password>, --password <password> Remote jmx agent password -u <username>, --username <username> Remote jmx agent username info Provides node information, such as load and uptime. Synopsis nodetool <options> info ( -T | --tokens ) • options are: • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -T or --tokens means provide all token information. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Provides node information including the token and on disk storage (load) information, times started (generation), uptime in seconds, and heap memory usage. invalidatekeycache Resets the global key cache parameter to the default, which saves all keys. Synopsis nodetool <options> invalidatekeycache options are: • • • • • 158 ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Cassandra tools Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description By default the key_cache_keys_to_save is disabled in the cassandra.yaml. This command resets the parameter to the default. invalidaterowcache Resets the global key cache parameter, row_cache_keys_to_save, to the default (not set), which saves all keys. Synopsis nodetool <options> invalidaterowcache options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope join Causes the node to join the ring. Synopsis nodetool <options> join options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR 159 Cassandra tools • • Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Causes the node to join the ring, assuming the node was initially not started in the ring using the Djoin_ring=false cassandra utility option. The joining node should be properly configured with the desired options for seed list, initial token, and auto-bootstrapping. listsnapshots Lists snapshot names, size on disk, and true size. Synopsis nodetool <options> listsnapshots options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Available in Cassandra 2.1 and later. Example Snapshot Details: Snapshot Name Keyspace Column Family True Size Size on Disk 1387304478196 1387304417755 1387305820866 Keyspace1 Keyspace1 Keyspace1 Standard1 Standard1 Standard2 0 bytes 0 bytes 0 bytes 308.66 MB 107.21 MB 41.69 MB Keyspace1 Standard1 0 bytes 308.66 MB move Moves the node on the token ring to a new token. Synopsis nodetool <options> move -- <new token> • options are: • • • 160 ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > Cassandra tools • • • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. 127 new token is a number in the range 0 to 2 -1 for negative tokens. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Escape negative tokens using \\ . For example: move \\-123 . This command essentially combines decommission and bootstrapoperations. netstats Provides network information about the host. Synopsis nodetool <options> netstats -H • • options are: • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) H converts bytes to a human readable form: kilobytes (KB), megabytes (MB), gigabytes (GB), or terabytes (TB). (Cassandra 2.1.1) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description The default host is the connected host if the user does not include a host name or IP address in the command. The output includes the following information: • • • • JVM settings Mode Read repair statistics Attempted • The number of successfully completed read repair operations Mismatch (blocking) The number of read repair operations since server restart that blocked a query. 161 Cassandra tools • Mismatch (background) • The number of read repair operations since server restart performed in the background. Pool name • Information about client read and write requests by thread pool. Active, pending, and completed number of commands and responses Example Get the network information for a node 10.171.147.128: nodetool -h 10.171.147.128 netstats The output is: Mode: NORMAL Not sending any streams. Read Repair Statistics: Attempted: 0 Mismatch (Blocking): 0 Mismatch (Background): 0 Pool Name Commands Responses Active n/a n/a Pending 0 0 pausehandoff Pauses the hints delivery process Synopsis nodetool <options> pausehandoff options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope proxyhistograms Provides a histogram of network statistics. Synopsis nodetool <options> proxyhistograms options are: • • • 162 ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > Completed 1156 2750 Cassandra tools • • ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description The output of this command shows the full request latency recorded by the coordinator. The output includes the percentile rank of read and write latency values for inter-node communication. Typically, you use the command to see if requests encounter a slow node. Examples This example shows the output from nodetool proxyhistograms after running 4,500 insert statements and 45,000 select statements on a three ccm node-cluster on a local computer. $ nodetool proxyhistograms proxy histograms Percentile Read Latency (micros) 50% 1502.50 75% 1714.75 95% 31210.25 98% 36365.00 99% 36365.00 Min 616.00 Max 36365.00 Write Latency (micros) 375.00 420.00 507.00 577.36 740.60 230.00 55726.00 Range Latency (micros) 446.00 498.00 800.20 948.40 1024.39 311.00 59247.00 rangekeysample Provides the sampled keys held across all keyspaces. Synopsis nodetool <options> rangekeysample options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope 163 Cassandra tools rebuild Rebuilds data by streaming from other nodes. Synopsis nodetool <options> rebuild -- <data center> • options are: • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. data center is the name of an arbitrarily chosen data center from which to select sources for streaming. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description This command operates on multiple nodes in a cluster. Similar to bootstrap. Rebuild (like bootstrap) only streams data from a single source replica per range. Use this command to bring up a new data center in an existing cluster. rebuild_index Performs a full rebuild of the index for a table Synopsis nodetool <options> rebuild_index -- <keyspace> <table>( <index> ... ) • options are: • • • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. keyspace is a keyspace name. table is a table name. index is an optional list of index names separated by a space. Synopsis Legend • • • • 164 Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Cassandra tools • Orange ( and ) means not literal, indicates scope Description Fully rebuilds one or more indexes for a table. refresh Loads newly placed SSTables onto the system without a restart. Synopsis nodetool <options> refresh -- <keyspace> <table> • options are: • • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. keyspace is a keyspace name. table is a table name. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope reloadtriggers Reloads trigger classes. Synopsis nodetool <options> reloadtriggers options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope 165 Cassandra tools Description Available in Cassandra 2.1 and later. removenode Provides the status of current node removal, forces completion of pending removal, or removes the identified node. Synopsis nodetool <options> removenode -- <status> | <force> | <ID> • options are: • • • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. status provides status information. force forces completion of the pending removal. ID is the host ID, in UUID format. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description This command removes a node, shows the status of a removal operation, or forces the completion of a pending removal. When the node is down and nodetool decommission cannot be used, use nodetool removenode. Run this command only on nodes that are down. If the cluster does not use vnodes, before running the nodetool removenode command, adjust the tokens. Examples Determine the UUID of the node to remove by running nodetool status. Use the UUID of the node that is down to remove the node. $ nodetool status Datacenter: DC1 =============== Status=Up/Down |/ State=Normal/Leaving/Joining/Moving -- Address Load Tokens Owns (effective) Rack UN 192.168.2.101 112.82 KB 256 31.7% be41-ef7dd3a8ad06 RAC1 DN 192.168.2.103 91.11 KB 256 33.9% ab66-9e2fd5150edd RAC1 UN 192.168.2.102 124.42 KB 256 32.6% bad8-43fddce94b7c RAC1 Host ID 420129fc-0d84-42b0d0844a21-3698-48838d5ed9f4-7764-4dbd- $ nodetool removenode d0844a21-3698-4883-ab66-9e2fd5150edd 166 Cassandra tools View the status of the operation to remove the node: $ nodetool removenode status RemovalStatus: No token removals in process. Confirm that the node has been removed. $ nodetool status Datacenter: DC1 =============== Status=Up/Down |/ State=Normal/Leaving/Joining/Moving -- Address Load Tokens Owns (effective) Rack UN 192.168.2.101 112.82 KB 256 37.7% be41-ef7dd3a8ad06 RAC1 UN 192.168.2.102 124.42 KB 256 38.3% bad8-43fddce94b7c RAC1 Host ID 420129fc-0d84-42b08d5ed9f4-7764-4dbd- repair Repairs one or more tables. Synopsis nodetool <options> repair ( -dc <dc_name> ) | ( --in-dc <dc_name> ) ( -et <end_token>) | ( --end-token <end_token> ) ( -hosts <host_name host_name . . . > ) | ( --in-hosts <host_name host_name . . .> ) ( -inc | --incremental ) ( -local | --in-local-dc ) ( -par | --parallel ) ( -pr | --partitioner-range ) ( -st <start_token> ) | ( --start-token <start_token> ) -- <keyspace> ( <table> ... ) • • • • • • • • • • • • options are: • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -dc, or --in-dc, followed by dc_name, or means restrict repair to nodes in the named data center, which must be the local data center. -et, or --end-token, followed by the UUID of a token means means stop repairing a range of nodes after repairing this token. Use -hosts to specify neighbor nodes. -hosts <host_name host_name . . . >, or --in-hosts <host_name host_name . . .>. Used to reduce network traffic. -inc, or --incremental means do an incremental repair. -local, or --in-local-dc, means repair nodes in the same data center only. -par, or --parallel, means do a parallel repair. -pr, or --partitioner-range, means repair only the first range returned by the partitioner. -st, or --start-token, followed by the UUID of a token means start repairing a range of nodes at this token. -- separates an option and argument that could be mistaken for a option. keyspace is the keyspace name. The default is all. table is one or more table names, separated by a space. The default is all. 167 Cassandra tools Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Performing an anti-entropy node repair on a regular basis is important, especially when frequently deleting data. The nodetool repair command repairs one or more nodes in a cluster, and includes an option to restrict repair to a set of nodes. Anti-entropy node repair performs the following tasks: • • Ensures that all data on a replica is consistent. Repairs inconsistencies on a node that has been down. By default, Cassandra 2.1 does a full, sequential repair. Using options You can use options to do these other types of repair: • • Incremental Parallel Use the -hosts option to list the good nodes to use for repairing the bad nodes. Use -h to name the bad nodes. Use the -inc option for an incremental repair. An incremental repair eliminates the need for constant Merkle tree construction by persisting already repaired data and calculating only the Merkle trees for SSTables that have not been repaired. The repair process is likely more performant than the other types of repair even as datasets grow, assuming you run repairs frequently. Before doing an incremental repair for the first time, perform migration steps first if necessary. Use the -par option for a parallel repair. Unlike sequential repair, parallel repair constructs the Merkle tables for all nodes at the same time. Therfore, no snapshots are required (or generated). Use a parallel repair to complete the repair quickly or when you have operational downtime that allows the resources to be completely consumed during the repair. Performing partitioner range repairs by using the -pr option is generally not recommended. Example All nodetool repair arguments are optional. The following examples show the following types of repair: • • • An incremental, parallel repair of all keyspaces on the current node A partitioner range repair of the bad partition on current node using the good partitions on 10.2.2.20 or 10.2.2.21 A start-point-to-end-point repair of all nodes between two nodes on the ring $ nodetool repair -par -inc $ nodetool repair -pr -hosts 10.2.2.20 10.2.2.21 $ nodetool -st a9fa31c7-f3c0-44d1-b8e7-a26228867840c -et f5bb146cdb51-475ca44f-9facf2f1ad6e To restrict the repair to the local data center, use the -dc option followed by the name of the data center. Issue the command from a node in the data center you want to repair. Issuing the command from a data center other than the named one returns an error. $ nodetool repair -dc DC1 [2014-07-24 21:59:55,326] Nothing to repair for keyspace 'system' 168 Cassandra tools [2014-07-24 21:59:55,617] Starting repair command #2, repairing 490 ranges for keyspace system_traces (seq=true, full=true) [2014-07-24 22:23:14,299] Repair session 323b9490-137e-11e4-88e3-c972e09793ca for range (820981369067266915,822627736366088177] finished [2014-07-24 22:23:14,320] Repair session 38496a61-137e-11e4-88e3-c972e09793ca for range (2506042417712465541,2515941262699962473] finished . . . An inspection of the system.log shows repair taking place only on IP addresses in DC1. . . . INFO [AntiEntropyStage:1] 2014-07-24 22:23:10,708 RepairSession.java:171 - [repair #16499ef0-1381-11e4-88e3-c972e09793ca] Received merkle tree for sessions from /192.168.2.101 INFO [RepairJobTask:1] 2014-07-24 22:23:10,740 RepairJob.java:145 - [repair #16499ef0-1381-11e4-88e3-c972e09793ca] requesting merkle trees for events (to [/192.168.2.103, /192.168.2.101]) . . . resetlocalschema Reset the node's local schema and resynchronizes. Synopsis nodetool <options> resetlocalschema options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password> ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope resumehandoff Resume hints delivery process. Synopsis nodetool <options> resumehandoff options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password> ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • Angle brackets (< >) mean not literal, a variable 169 Cassandra tools • • • • Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope ring Provides node status and information about the ring. Synopsis nodetool <options> ring ( -r | --resolve-ip ) -- <keyspace> • options are: • • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -r, or --resolve-ip, means to provide node names instead of IP addresses. -- separates an option and argument that could be mistaken for a option. keyspace is a keyspace name. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Displays node status and information about the ring as determined by the node being queried. This information can give you an idea of the load balance and if any nodes are down. If your cluster is not properly configured, different nodes may show a different ring. Check that the node appears the same way in the ring.If you use virtual nodes (vnodes), use nodetool status for succinct output. 170 • Address • The node's URL. DC (data center) • The data center containing the node. Rack • The rack or, in the case of Amazon EC2, the availability zone of the node. Status - Up or Down • Indicates whether the node is functioning or not. State - N (normal), L (leaving), J (joining), M (moving) • The state of the node in relation to the cluster. Load - updates every 90 seconds • The amount of file system data under the cassandra data directory after excluding all content in the snapshots subdirectories. Because all SSTable data files are included, any data that is not cleaned up, such as TTL-expired cell or tombstoned data) is counted. Token Cassandra tools • The end of the token range up to and including the value listed. For an explanation of token ranges, see Data Distribution in the Ring . Owns • The percentage of the data owned by the node per data center times the replication factor. For example, a node can own 33% of the ring, but show100% if the replication factor is 3. Host ID The network ID of the node. scrub Rebuild SSTables for one or more Cassandra tables. Synopsis nodetool <options> scrub <keyspace> -- ( -ns | --no-snapshot ) ( -s | --skipcorrupted ) ( <table> ... ) • • • • • • options are: • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. keyspace is the name of a keyspace. -ns, or --no-snapshot, triggers a snapshot of the scrubbed table first assuming snapshots are not disabled (the default). - s, or --skip-corrupted skips corrupted partitions even when scrubbing counter tables. (default false) table is one or more table names, separated by a space. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Rebuilds SSTables on a node for the named tables and snapshots data files before rebuilding as a safety measure. If possible use upgradesstables. While scrub rebuilds SSTables, it also discards data that it deems broken and creates a snapshot, which you have to remove manually. If the -ns option is specified, snapshot creation is disabled. If scrub can't validate the column value against the column definition's data type, it logs the partition key and skips to the next partition. Skipping corrupted partitions in tables having counter columns results in under-counting. By default the scrub operation stops if you attempt to skip such a partition. To force the scrub to skip the partition and continue scrubbing, re-run nodetool scrub using the --skip-corrupted option. 171 Cassandra tools setcachecapacity Set global key and row cache capacities in megabytes. Synopsis nodetool <options> setcachecapacity -- <key-cache-capacity> <row-cachecapacity> • options are: • • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. key-cache-capacity is the maximum size in MB of the key cache in memory. row-cache-capacity corresponds to the maximum size in MB of the row cache in memory. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description The key-cache-capacity argument corresponds to the key_cache_size_in_mb parameter in the cassandra.yaml. Each key cache hit saves one seek and each row cache hit saves a minimum of two seeks. Devoting some memory to the key cache is usually a good tradeoff considering the positive effect on the response time. The default value is empty, which means a minimum of five percent of the heap in MB or 100 MB. The row-cache-capacity argument corresponds to the row_cache_size_in_mb parameter in the cassandra.yaml. By default, row caching is zero (disabled). setcachekeystosave Sets the number of keys saved by each cache for faster post-restart warmup. Synopsis nodetool <options> setcachekeystosave -- <key-cache-keys-to-save> <row-cachekeys-to-save> • • • • 172 options are: • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. key-cache-keys-to-save is the number of keys from the key cache to save to the saved caches directory. row-cache-keys-to-save is the number of keys from the row cache to save to the saved caches directory. Cassandra tools Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description This command saves the specified number of key and row caches to the saved caches directory, which you specify in the cassandra.yaml. The key-cache-keys-to-save argument corresponds to the key_cache_keys_to_save in the cassandra.yaml, which is disabled by default, meaning all keys will be saved. The row-cache-keys-to-save argument corresponds to the row_cache_keys_to_save in the cassandra.yaml, which is disabled by default. setcompactionthreshold Sets minimum and maximum compaction thresholds for a table. Synopsis nodetool <options> setcompactionthreshold -- <keyspace> <table> <minthreshold> <maxthreshold> • • • • • • options are: • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. keyspace is the name of a keyspace. table is a table name. minthreshold sets the minimum number of SSTables to trigger a minor compaction when using SizeTieredCompactionStrategy or DateTieredCompactionStrategy. maxthreshold sets the maximum number of SSTables to allow in a minor compaction when using SizeTieredCompactionStrategy or DateTieredCompactionStrategy. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description This parameter controls how many SSTables of a similar size must be present before a minor compaction is scheduled. The max_threshold table property sets an upper bound on the number of SSTables that may be compacted in a single minor compaction, as described in http://wiki.apache.org/cassandra/ MemtableSSTable. When using LeveledCompactionStrategy, maxthreshold sets the MAX_COMPACTING_L0, which limits the number of L0 SSTables that are compacted concurrently to avoid wasting memory or running out of memory when compacting highly overlapping SSTables. 173 Cassandra tools setcompactionthroughput Sets the throughput capacity for compaction in the system, or disables throttling. Synopsis nodetool <options> setcompactionthroughput -- <value_in_mb> • options are: • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. value_in_mb is the throughput capacity in MB per second for compaction. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Set value_in_mb to 0 to disable throttling. sethintedhandoffthrottlekb Sets hinted handoff throttle in kb/sec per delivery thread. (Cassandra 2.1.1 and later) Synopsis nodetool <options> sethintedhandoffthrottlekb <value_in_kb/sec> • options are: • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) value_in_kb/sec is the throttle time. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description When a node detects that a node for which it is holding hints has recovered, it begins sending the hints to that node. This setting specifies the maximum sleep interval per delivery thread in kilobytes per second 174 Cassandra tools after delivering each hint. The interval shrinks proportionally to the number of nodes in the cluster. For example, if there are two nodes in the cluster, each delivery thread uses the maximum interval; if there are three nodes, each node throttles to half of the maximum interval, because the two nodes are expected to deliver hints simultaneously. Example nodetool sethintedhandoffthrottlekb 2048 setlogginglevel Set the log level for a service. Synopsis nodetool <options> setlogginglevel -- < class_qualifier > < level > options are: • • • • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password> ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. class_qualifier is the logger class qualifier, a fully qualified domain name, such as org.apache.cassandra.service.StorageProxy. level is the logging level, for example DEBUG. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description You can use this command to set logging levels for services instead of modifying the logback-text.xml file. The following values are valid for the logger class qualifier: • • • org.apache.cassandra org.apache.cassandra.db org.apache.cassandra.service.StorageProxy The possible log levels are: • • • • • • • ALL TRACE DEBUG INFO WARN ERROR OFF If both class qualifer and level arguments to the command are empty or null, the command resets logging to the initial configuration. 175 Cassandra tools Example This command sets the StorageProxy service to debug level. nodetool setlogginglevel org.apache.cassandra.service.StorageProxy DEBUG setstreamthroughput Sets the throughput capacity in MB for streaming in the system, or disable throttling. Synopsis nodetool <options> setstreamthroughput -- <value_in_mb> • options are: • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. value_in_mb is the throughput capacity in MB per second for streaming. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Set value_in_MB to 0 to disable throttling. settraceprobability Sets the probability for tracing a request. Synopsis nodetool <options> settraceprobability -- <value> • options are: • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. value is a probability between 0 and 1. Synopsis Legend • • • • 176 Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Cassandra tools • Orange ( and ) means not literal, indicates scope Description Probabilistic tracing is useful to determine the cause of intermittent query performance problems by identifying which queries are responsible. This option traces some or all statements sent to a cluster. Tracing a request usually requires at least 10 rows to be inserted. A probability of 1.0 will trace everything whereas lesser amounts (for example, 0.10) only sample a certain percentage of statements. Care should be taken on large and active systems, as system-wide tracing will have a performance impact. Unless you are under very light load, tracing all requests (probability 1.0) will probably overwhelm your system. Start with a small fraction, for example, 0.001 and increase only if necessary. The trace information is stored in a system_traces keyspace that holds two tables – sessions and events, which can be easily queried to answer questions, such as what the most timeconsuming query has been since a trace was started. Query the parameters map and thread column in the system_traces.sessions and events tables for probabilistic tracing information. snapshot Take a snapshot of one or more keyspaces, or of a table, to backup data. Synopsis nodetool <options> snapshot ( -cf <table> | --column-family <table> ) ( -t <tag> | --tag <tag> ) -- ( <keyspace> ) | ( <keyspace> ... ) • options are: • • • • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -cf, or --column-family, followed by the name of the table to be backed up. -t or --tag, followed by the snapshot name. -- separates an option and argument that could be mistaken for a option. keyspace is a single keyspace name that is required when using the -cf option keyspace_list is one or more optional keyspace names, separated by a space. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Use this command to back up data using a snapshot. Depending on how you use the command, the following data is included: • All keyspaces on a node. • Omit the optional keyspace and table parameters, as shown in the first example. One or more keyspaces and all tables in the named keyspaces. Include one or more names of the keyspaces, as shown in the second and third examples. 177 Cassandra tools • A single table. Include the name of a single keyspace and a table using the -cf option, as shown in the last example. Cassandra flushes the node before taking a snapshot, takes the snapshot, and stores the data in the snapshots directory of each keyspace in the data directory. If you do not specify the name of a snapshot directory using the -t option, Cassandra names the directory using the timestamp of the snapshot, for example 1391460334889. Follow the procedure for taking a snapshot before upgrading Cassandra. When upgrading, backup all keyspaces. For more information about snapshots, see Apache documentation. Example: All keyspaces Take a snapshot of all keyspaces on the node. On Linux, in the Cassandra bin directory, for example: $ bin/nodetool snapshot The following message appears: Requested creating snapshot(s) for [all keyspaces] with snapshot name [1391464041163] Snapshot directory: 1391464041163 Because you did not specify a snapshot name, Cassandra names snapshot directories using the timestamp of the snapshot. If the keyspace contains no data, empty directories are not created. Example: Single keyspace snapshot Assuming you created the keyspace and tables in the music service example, take a snapshot of the music keyspace and name the snapshot 2014.06.24. On Linux, in the Cassandra bin directory, for example: $ bin/nodetool snapshot -t 2014.06.24 music The following message appears: Requested creating snapshot(s) for [music] with snapshot name [2014.06.24] Snapshot directory: 2014.06.24 Assuming the music keyspace contains two tables, songs and playlists, taking a snapshot of the keyspace creates multiple snapshot directories named 2014.06.24. A number of .db files containing the data are located in these directories. For example, from the installation directory: $ cd data/data/music/playlists-bf8118508cfd11e3972273ded3cb6170/ snapshots/1404936753154 $ ls music-playlists-ka-1-CompressionInfo.db music-playlists-ka-1-Index.db music-playlists-ka-1-TOC.txt music-playlists-ka-1-Data.db music-playlists-ka-1-Statistics.db music-playlists-ka-1-Filter.db music-playlists-ka-1-Summary.db $ cd data/data/music/songs-b8e385a08cfd11e3972273ded3cb6170/2014.06.24/ snapshots/1404936753154 music-songs-ka-1-CompressionInfo.db music-songs-ka-1-Index.db music-songska-1-TOC.txt music-songs-ka-1-Data.db music-songs-ka-1-Statistics.db music-songs-ka-1-Filter.db music-songs-ka-1-Summary.db Example: Multiple keyspaces snapshot Assuming you created a keyspace named mykeyspace in addition to the music keyspace, take a snapshot of both keyspaces. On Linux, in the Cassandra bin directory, for example: $ bin/nodetool snapshot mykeyspace music The following message appears: Requested creating snapshot(s) for [mykeyspace, music] with snapshot name [1391460334889] Snapshot directory: 1391460334889 178 Cassandra tools Example: Single table snapshot Take a snapshot of only the playlists table in the music keyspace. On Linux, in the Cassandra bin directory, for example: $ bin/nodetool snapshot -cf playlists music Requested creating snapshot(s) for [music] with snapshot name [1391461910600] Snapshot directory: 1391461910600 Cassandra creates the snapshot directory named 1391461910600 that contains the backup data of playlists table in data/data/music/playlists-bf8118508cfd11e3972273ded3cb6170/ snapshots, for example. status Provide information about the cluster, such as the state, load, and IDs. Synopsis nodetool <options> status ( -r | --resolve-ip ) -- <keyspace> • options are: • • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -r, or --resolve-ip, means to provide node names instead of IP addresses. -- separates an option and argument that could be mistaken for a option. keyspace is a keyspace name. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description The status command provides the following information: • Status - U (up) or D (down) • Indicates whether the node is functioning or not. State - N (normal), L (leaving), J (joining), M (moving) • The state of the node in relation to the cluster. Address • The node's URL. Load - updates every 90 seconds • The amount of file system data under the cassandra data directory after excluding all content in the snapshots subdirectories. Because all SSTable data files are included, any data that is not cleaned up, such as TTL-expired cell or tombstoned data) is counted. Tokens The number of tokens set for the node. 179 Cassandra tools • Owns The percentage of the data owned by the node per data center times the replication factor. For example, a node can own 33% of the ring, but show 100% if the replication factor is 3. • Attention: If your cluster uses keyspaces having different replication strategies or replication factors, specify a keyspace when you run nodetool status to get meaningful ownship information. Host ID • The network ID of the node. Rack The rack or, in the case of Amazon EC2, the availability zone of the node. Example This example shows the output from running nodetool status. nodetool status mykeyspace Datacenter: datacenter1 ======================= Status=Up/Down |/ State=Normal/Leaving/Joining/Moving -- Address Load Tokens Owns Rack UN 127.0.0.1 47.66 KB 1 33.3% rack1 UN 127.0.0.2 47.67 KB 1 33.3% rack1 UN 127.0.0.3 47.67 KB 1 33.3% rack1 Host ID aaa1b7c1-6049-4a08-ad3e-3697a0e30e10 1848c369-4306-4874-afdf-5c1e95b8732e 49578bf1-728f-438d-b1c1-d8dd644b6f7f statusbinary Provide the status of native transport. Synopsis nodetool <options> statusbinary options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Provides the status of the binary protocol, also known as the native transport. 180 Cassandra tools statusthrift Provide the status of the Thrift server. Synopsis nodetool <options> statusthrift options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope stop Stops the compaction process. Synopsis nodetool <options> stop -- <compaction_type> • options are: • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. A compaction type: COMPACTION, VALIDATION, CLEANUP, SCRUB, INDEX_BUILD Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Stops an operation from continuing to run. This command is typically used to stop a compaction that has a negative impact on the performance of a node. After the compaction stops, Cassandra continues with the remaining operations in the queue. Eventually, Cassandra restarts the compaction. 181 Cassandra tools stopdaemon Stops the cassandra daemon. Synopsis nodetool <options> stopdaemon options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope tpstats Provides usage statistics of thread pools. Synopsis nodetool <options> tpstats options are: • • • • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password> ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Run the nodetool tpstats command on the local node. The nodetool tpstats command provides statistics about the number of active, pending, and completed tasks for each stage of Cassandra operations by thread pool. A high number of pending tasks for any pool can indicate performance problems, as described in http://wiki.apache.org/cassandra/Operations#Monitoring. This table describes key indicators: 182 Cassandra tools Table 12: nodetool tpstats output Name of statistic Task Related information CounterMutationStage Local counter changes ReadStage Local reads RequestResponseStage Handle responses from other nodes MutationStage Local writes ReadRepairStage A digest query and update of replicas of a key GossipStage Handle gossip rounds every second CacheCleanupExecutor Clears the cache AntiEntropyStage Repair consistency MigrationStage Make schema changes ValidationExecutor Validates schema CommitlogArchiver Archives commitlog MiscStage Miscellaneous operations MemtableFlushWriter Writes memtable contents to disk MemtableReclaimMemory Makes unused memory available PendingRangeCalculator Calculate pending ranges per bootstraps and departed nodes A high number of pending write requests indicates a problem handling them. Tune hardware or Cassandra configuration. Nodetool repair Developer notes MemtablePostFlush CompactionExecutor Runs compaction InternalResponseStage Respond to non-client initiated messages, including bootstrapping and schema checking HintedHandoff Send missed mutations to other nodes Example Run the command every two seconds. nodetool -h labcluster tpstats Example output is: Pool Name time blocked Active Pending Completed Blocked All 183 Cassandra tools CounterMutationStage 0 ReadStage 0 RequestResponseStage 0 MutationStage 0 ReadRepairStage 0 GossipStage 0 CacheCleanupExecutor 0 AntiEntropyStage 0 MigrationStage 0 ValidationExecutor 0 CommitLogArchiver 0 MiscStage 0 MemtableFlushWriter 0 MemtableReclaimMemory 0 PendingRangeCalculator 0 MemtablePostFlush 0 CompactionExecutor 0 InternalResponseStage 0 HintedHandoff Message type RANGE_SLICE READ_REPAIR PAGED_RANGE BINARY READ MUTATION _TRACE REQUEST_RESPONSE COUNTER_MUTATION 0 0 0 0 0 0 103 0 0 0 0 0 0 0 13234794 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 126 0 0 0 126 0 0 0 1 0 0 0 1468 0 0 0 254 0 0 0 1 0 0 0 0 Dropped 0 0 0 0 0 180 0 0 0 truncatehints Truncates all hints on the local node, or truncates hints for the one or more endpoints. Synopsis nodetool <options> truncatehints -- ( <endpoint> ... ) • options are: • • • • 184 ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> ( -pw | --password ) <password > ( -u | --username ) <user name> Cassandra tools • • • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -- separates an option and argument that could be mistaken for a option. endpoint is one or more endpoint IP addresses or host names which hints are to be deleted. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope upgradesstables Rewrites SSTables for tables that are not running the current version of Cassandra. Synopsis nodetool <options> upgradesstables ( -a | --include-all-sstables ) -- <keyspace> ( <table> ... ) • options are: • • • • • ( -h | --host ) <host name> | <ip address> • ( -p | --port ) <port number> • ( -pw | --password ) <password > • ( -u | --username ) <user name> • ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) -a or --include-all-sstables, followed by the snapshot name. -- separates an option and argument that could be mistaken for a option. keyspace a keyspace name. table is one or more table names, separated by a space. Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Description Rewrites SSTables on a node that are incompatible with the current version. Use this command when upgrading your server or changing compression options. version Provides the version number of Cassandra running on the specified node. Synopsis nodetool <options> version options are: • • ( -h | --host ) <host name> | <ip address> ( -p | --port ) <port number> 185 Cassandra tools • • • ( -pw | --password ) <password > ( -u | --username ) <user name> ( -pwf <passwordFilePath | --password-file <passwordFilePath> ) Synopsis Legend • • • • • Angle brackets (< >) mean not literal, a variable Italics mean optional The pipe (|) symbol means OR or AND/OR Ellipsis (...) means repeatable Orange ( and ) means not literal, indicates scope Cassandra bulk loader (sstableloader) About this task The Cassandra bulk loader, also called the sstableloader, provides the ability to: • • • Bulk load external data into a cluster. Load existing SSTables into another cluster with a different number of nodes or replication strategy. Restore snapshots. The sstableloader streams a set of SSTable data files to a live cluster; it does not simply copy the set of SSTables to every node, but transfers the relevant part of the data to each node, conforming to the replication strategy of the cluster. The table into which the data is loaded does not need to be empty. If tables are repaired in a different cluster, after being loaded, the tables will be unrepaired. Prerequisites Because sstableloader uses Cassandra gossip, make sure of the following: • • • The cassandra.yaml configuration file is in the classpath and properly configured. At least one node in the cluster is configured as seed. In the cassandra.yaml file, the following properties are properly configured for the cluster that you are importing into: • • • • • cluster_name listen_address storage_port rpc_address rpc_port When using sstableloader to load external data, you must first generate SSTables. If using DataStax Enterprise, you can use Sqoop to migrate external data to Cassandra. Generating SSTables SSTableWriter is the API to create raw Cassandra data files locally for bulk load into your cluster. The Cassandra source code includes the CQLSSTableWriter implementation for creating SSTable files from external data without needing to understand the details of how those map to the underlying storage engine. Import the org.apache.cassandra.io.sstable.CQLSSTableWriter class, and define the schema for the data you want to import, a writer for the schema, and a prepared insert statement, as shown in Cassandra 2.0.1, 2.0.2, and a quick peek at 2.0.3. Using sstableloader Before loading the data, you must define the schema of the tables with CQL or Thrift. 186 Cassandra tools To get the best throughput from SSTable loading, you can use multiple instances of sstableloader to stream across multiple machines. No hard limit exists on the number of SSTables that sstableloader can run at the same time, so you can add additional loaders until you see no further improvement. If you use sstableloader on the same machine as the Cassandra node, you can't use the same network interface as the Cassandra node. However, you can use the JMX StorageService > bulkload() call from that node. This method takes the absolute path to the directory where the SSTables are located, and loads them just as sstableloader does. However, because the node is both source and destination for the streaming, it increases the load on that node. This means that you should load data from machines that are not Cassandra nodes when loading into a live cluster. Usage: Package installations: $ sstableloader [options] path_to_keyspace Tarball installations: $ cd install_location/bin $ sstableloader [options] path_to_keyspace The sstableloader bulk loads the SSTables found in the keyspace directory to the configured target cluster, where the parent directories of the directory path are used as the target keyspace/table name. 1. Go to the location of the SSTables: $ cd /var/lib/cassandra/data/Keyspace1/Standard1/ 2. To view the contents of the keyspace: $ ls Keyspace1-Standard1-jb-60-CRC.db Keyspace1-Standard1-jb-60-Data.db ... Keyspace1-Standard1-jb-60-TOC.txt 3. To bulk load the files, specify the path to Keyspace1/Standard1/ in the target cluster: $ sstableloader -d 110.82.155.1 /var/lib/cassandra/data/Keyspace1/Standard1/ ## package installation $ install_location/bin/sstableloader -d 110.82.155.1 /var/lib/cassandra/ data/Keyspace1/Standard1/ ## tarball installation This bulk loads all files. Table 13: sstableloader options Short option Long option Description -alg --ssl-alg <ALGORITHM> Client SSL algorithm (default: SunX509). -ciphers --ssl-ciphers <CIPHER- Client SSL. Comma-separated list of encryption suites. SUITES> -cph --connections-per-host <connectionsPerHost> Number of concurrent connections-per-host. -d --nodes <initial_hosts> Required. Connect to a list of (comma separated) hosts for initial cluster information. 187 Cassandra tools Short option Long option Description -f --conf-path <path_to_config_file> Path to the cassandra.yaml path for streaming throughput and client/server SSL. -h --help Display help. -i --ignore <NODES> Do not stream to this comma separated list of nodes. -ks --keystore <KEYSTORE> Client SSL. Full path to the keystore. -kspw --keystore-password <KEYSTOREPASSWORD> Client SSL. Password for the keystore. --no-progress Do not display progress. -p --port <rpc port> RPC port (default: 9160 [Thift]). -prtcl --ssl-protocol <PROTOCOL> Client SSL. Connections protocol to use (default: TLS). -pw --password <password> Password for Cassandra authentication. -st --store-type <STORETYPE> Client SSL. Type of store. -t --throttle <throttle> Throttle speed in Mbits (default: unlimited). -tf --transport-factory <transport factory> Fully-qualified ITransportFactory class name for creating a connection to Cassandra. -ts --truststore <TRUSTSTORE> Client SSL. Full path to truststore. -tspw --truststore-password <TRUSTSTOREPASSWORD> Client SSL. Password of the truststore. -u --username <username> User name for Cassandra authentication. -v --verbose Verbose output. The following cassandra.yaml options can be over-ridden from the command line: Option in cassandra.yaml Command line example stream_throughput_outbound_megabits_per_sec --throttle 300 server_encryption_options --ssl-protocol none client_encryption_options --keystore-password MyPassword The cassandra utility About this task Cassandra start-up parameters can be run from the command line (in Tarball installations) or specified in the cassandra-env.sh file (Package or Tarball installations). 188 Cassandra tools File locations cassandra-env.sh • • Tarball installations: install_location/conf/cassandra-env.sh Package installations: /etc/cassandra/cassandra-env.sh You can also use the cassandra-env.sh file to pass additional options, such as maximum and minimum heap size, to the Java virtual machine rather than setting them in the environment. Usage Add the following to the cassandra-env.sh file: JVM_OPTS="$JVM_OPTS -D[PARAMETER]" For Tarball installations, you can run this tool from the command line: cassandra [OPTIONS] Examples: • • cassandra-env.sh: JVM_OPTS="$JVM_OPTS -Dcassandra.load_ring_state=false" Command line: bin/cassandra -Dcassandra.load_ring_state=false The Example section contains more examples. Command line only options Option Description -f Start the cassandra process in foreground. The default is to start as background process. -h Help. -p filename Log the process ID in the named file. Useful for stopping Cassandra by killing its PID. -v Print the version and exit. Start-up parameters The -D option specifies the start-up parameters in both the command line and cassandra-env.sh file. cassandra.auto_bootstrap=false Facilitates setting auto_bootstrap to false on initial set-up of the cluster. The next time you start the cluster, you do not need to change the cassandra.yaml file on each node to revert to true. cassandra.available_processors=number_of_processors In a multi-instance deployment, multiple Cassandra instances will independently assume that all CPU processors are available to it. This setting allows you to specify a smaller set of processors. cassandra.boot_without_jna=true If JNA fails to initialize, Cassandra fails to boot. Use this command to boot Cassandra without JNA. cassandra.config=directory The directory location of the cassandra.yaml file. The default location depends on the type of installation. cassandra.initial_token=token Use when virtual nodes (vnodes) are not used. Sets the initial partitioner token for a node the first time the node is started. (Default: disabled) Note: Vnodes are highly recommended as they automatically select tokens. cassandra.join_ring=true|false 189 Cassandra tools Set to false to start Cassandra on a node but not have the node join the cluster. (Default: true) You can use nodetool join and a JMX call to join the ring afterwards. cassandra.load_ring_state=true|false Set to false to clear all gossip state for the node on restart. (Default: true) cassandra.metricsReporterConfigFile=file Enable pluggable metrics reporter. See Pluggable metrics reporting in Cassandra 2.0.2. cassandra.native_transport_port=port Set the port on which the CQL native transport listens for clients. (Default: 9042) cassandra.partitioner=partitioner Set the partitioner. (Default: org.apache.cassandra.dht.Murmur3Partitioner) cassandra.replace_address=listen_address or broadcast_address of dead node To replace a node that has died, restart a new node in its place specifying the listen_address or broadcast_address that the new node is assuming. The new node must not have any data in its data directory, that is, it must be in the same state as before bootstrapping. Note: The broadcast_address defaults to the listen_address except when using the EC2MultiRegionSnitch. cassandra.replayList=table Allow restoring specific tables from an archived commit log. cassandra.ring_delay_ms=ms Defines the amount of time a node waits to hear from other nodes before formally joining the ring. (Default: 1000ms) cassandra.rpc_port=port Set the port for the Thrift RPC service, which is used for client connections. (Default: 9160). cassandra.ssl_storage_port=port Set the SSL port for encrypted communication. (Default: 7001) cassandra.start_native_transport=true|false Enable or disable the native transport server. See start_native_transport in cassandra.yaml. (Default: true) cassandra.start_rpc=true/false Enable or disable the Thrift RPC server. (Default: true) cassandra.storage_port=port Set the port for inter-node communication. (Default: 7000) cassandra.triggers_dir=directory Set the default location for the trigger JARs. (Default: conf/triggers) cassandra.write_survey=true For testing new compaction and compression strategies. It allows you to experiment with different strategies and benchmark write performance differences without affecting the production workload. See Testing compaction and compression. consistent.rangemovement=true True makes Cassandra 2.1 bootstrapping behavior effective. False makes Cassandra 2.0 behavior effective. Example Clear gossip state when starting a node: • • Command line: bin/cassandra -Dcassandra.load_ring_state=false cassandra-env.sh: JVM_OPTS="$JVM_OPTS -Dcassandra.load_ring_state=false" Start Cassandra on a node and do not join the cluster: 190 Cassandra tools • • Command line: bin/cassandra -Dcassandra.join_ring=false cassandra-env.sh: JVM_OPTS="$JVM_OPTS -Dcassandra.join_ring=false" Replacing a dead node: • • Command line: bin/cassandra -Dcassandra.replace_address=10.91.176.160 cassandra-env.sh: JVM_OPTS="$JVM_OPTS -Dcassandra.replace_address=10.91.176.160" The cassandra-stress tool A Java-based stress testing utility for basic benchmarking and load testing a Cassandra cluster. About this task The choices you make when data modeling your application can make a big difference in how your application performs. Creating the best data model requires significant load testing and multiple iterations. The cassandra-stress tool helps you in this endeavor by populating your cluster and supporting stress testing of arbitrary CQL tables and arbitrary queries on tables. Use the cassandra-stress tool to: • • • • Quickly determine how a schema performs. Understand how your database scales. Optimize your data model and settings. Determine production capacity. Note: You can also use this tool on Cassandra 2.0 clusters. The cassandra-stress tool also supports a YAML-based profile for defining specific schema with potential compaction strategies, cache settings, and types. Sample files are located in: • • Package installations: /usr/share/doc/cassandra/examples Tarball installations: install_location/tools For a complete description on using these sample files, see Improved Cassandra 2.1 Stress Tool: Benchmark Any Schema – Part 1. The cassandra-stress tool creates a keyspace called Keyspace1 and within that, tables named Standard1, Counter1, depending on what type of table is being tested. These are automatically created the first time you run the stress test and are reused on subsequent runs unless you drop the keyspace using CQL. You cannot change the names; they are hard-coded. Usage: • • Package installations: cassandra-stress command [options] Tarball installations: install_location/tools/bin/cassandra-stress command [options] On tarball installations, you can use these commands and options with or without the cassandra-stress daemon running. Command Description read Multiple concurrent reads. The cluster must first be populated by a write test. write Multiple concurrent writes against the cluster. mixed Interleave basic commands with configurable ratio and distribution. The cluster must first be populated by a write test. counter_write Multiple concurrent updates of counters. 191 Cassandra tools Command Description counter_read Multiple concurrent reads of counters. The cluster must first be populated by a counter_write test. user Interleave user provided queries with configurable ratio and distribution. help Display help for a command or option. Display help for an option: cassandra-stress help [options] For example: cassandra-stress help -schema print Inspect the output of a distribution definition. legacy Legacy support mode. Important: Additional sub options are available for each option in the following table. See View schema help for an example. Option Description -pop Population distribution and intra-partition visit order. -insert Insert specific options relating to various methods for batching and splitting partition updates. -col Column details, such as size and count distribution, data generator, names, and comparator. -rate Thread count, rate limit, or automatic mode (default is auto). -mode Thrift or CQL with options. -schema Replication settings, compression, compaction, and so on. -node Nodes to connect to. -log Where to log progress and the interval to use. -transport Custom transport factories. -port Specify port for connecting Cassandra nodes. -sendto Specify stress server to send this command to. View schema help $ cassandra-stress help -schema replication([strategy=?][factor=?][<option 1..N>=?]): the replication strategy and any parameters strategy=? (default=org.apache.cassandra.locator.SimpleStrategy) replication strategy to use factor=? (default=1) number of replicas keyspace=? (default=Keyspace1) keyspace name to use compaction([strategy=?][<option 1..N>=?]): the compaction strategy and any parameters strategy=? compaction strategy to use 192 Define The The The Define The Cassandra tools compression=? Specify the compression to use for SSTable, default:no compression Populate the database Generally it is easier to let cassandra-stress create the basic schema and then modify it in CQL: #Load one row with default schema $ cassandra-stress write n=1 cl=one -mode native cql3 -log file=~/ create_schema.log #Modify schema in CQL $ cqlsh #Run a real write workload $ cassandra-stress write n=1000000 cl=one -mode native cql3 -schema keyspace="Keyspace1" -log file=~/load_1M_rows.log Running a mixed workload When running a mixed workload, you must escape parentheses, greater-than and less-than signs, and other such things. This example invokes a workload that is one-quarter writes and three-quarters reads. $ cassandra-stress mixed ratio\(write=1,read=3\) n=100000 cl=ONE -pop dist=UNIFORM\(1..1000000\) -schema keyspace="Keyspace1" -mode native cql3 rate threads\>=16 threads\<=256 -log file=~/mixed_autorate_50r50w_1M.log Notice the following in this example: 1. The ratio requires backslash-escaped parenthesis. 2. The value of n is different than in write phase. During the write phase, n records are written. However in the read phase, if n is too large, it is inconvenient to read all the records for simple testing. Generally, n does not need be large when validating the persistent storage systems of a cluster. The -pop dist=UNIFORM\(1..1000000\) portion says that of the n=100,000 operations, select the keys uniformly distributed between 1 and 1,000,000. Use this when you want to specify more data per node than what fits in DRAM. 3. In the rate section, the greater-than and less-than signs are escaped. If not escaped, the shell will attempt to use them for IO redirection. Specifically, the shell will try to read from a non-existent file called =256 and create a file called =16. The rate section tells cassandra-stress to automatically attempt different numbers of client threads and not test less that 16 or more than 256 client threads. Standard mixed read/write workload keyspace for a single node CREATE KEYSPACE "Keyspace1" WITH replication = { 'class': 'SimpleStrategy', 'replication_factor': '1' }; USE "Keyspace1"; CREATE TABLE "Standard1" ( key blob, "C0" blob, "C1" blob, "C2" blob, "C3" blob, "C4" blob, PRIMARY KEY (key) ) WITH 193 Cassandra tools bloom_filter_fp_chance=0.010000 AND caching='KEYS_ONLY' AND comment='' AND dclocal_read_repair_chance=0.000000 AND gc_grace_seconds=864000 AND index_interval=128 AND read_repair_chance=0.100000 AND replicate_on_write='true' AND default_time_to_live=0 AND speculative_retry='99.0PERCENTILE' AND memtable_flush_period_in_ms=0 AND compaction={'class': 'SizeTieredCompactionStrategy'} AND compression={'sstable_compression': 'LZ4Compressor'}; Splitting up a load over multiple cassandra-stress instances on different nodes This example is useful for loading into large clusters, where a single cassandra-stress load generator node cannot saturate the cluster. In this example, $NODES is a variable whose value is a comma delimited list of IP addresses such as 10.0.0.1,10.0.0.2, and so on. #On Node1 $ cassandra-stress write n=1000000 cl=one -mode native cql3 -schema keyspace="Keyspace1" -pop seq=1..1000000 -log file=~/node1_load.log -node $NODES #On Node2 $ cassandra-stress write n=1000000 cl=one -mode native cql3 -schema keyspace="Keyspace1" -pop seq=1000001..2000000 -log file=~/node2_load.log node $NODES Note the keyspace is defined and the -key option tells each instance which range of keys to populate. Using the Daemon Mode The daemon in larger-scale testing can prevent potential skews in the test results by keeping the JVM warm. The daemon is only available in tarball installations. Run the daemon from: install_location/tools/bin/cassandra-stressd start|stop|status [-h <host>] During stress testing, you can keep the daemon running and send it commands through it using the -send-to option. Example • Insert 1,000,000 rows to given host: /tools/bin/cassandra-stress -d 192.168.1.101 • When the number of rows is not specified, one million rows are inserted. Read 1,000,000 rows from given host: • tools/bin/cassandra-stress -d 192.168.1.101 -o read Insert 10,000,000 rows across two nodes: • /tools/bin/cassandra-stress -d 192.168.1.101,192.168.1.102 -n 10000000 Insert 10,000,000 rows across two nodes using the daemon mode: /tools/bin/cassandra-stress -d 192.168.1.101,192.168.1.102 -n 10000000 -send-to 54.0.0.1 194 Cassandra tools Interpreting the output of cassandra-stress About the period output from the running tests. Each line reports data for the interval between the last elapsed time and current elapsed time. Created keyspaces. Sleeping 1s for propagation. total,interval_op_rate,interval_key_rate,latency,95th,99.9th,elapsed_time 19523,1227,1227,41.6,86.1,189.1,21 41348,2182,2182,22.5,75.7,176.0,31 ... END Table 14: Output of cassandra-stress Data Description total Total number of operations since the start of the test. interval_op_rate Number of operations per second performed during the interval. interval_key_rate Number of keys/rows read or written per second during the interval (normally be the same as interval_op_rate unless doing range slices). latency Average latency in milliseconds for each operation during that interval. 95th 95% of the time the latency was less than the number displayed in the column (Cassandra 1.2 or later). 99.9th 99.9% of the time the latency was less than the number displayed in the column (Cassandra 1.2 or later). elapsed_time Number of seconds elapsed since the beginning of the test. The sstablescrub utility About this task The sstablescrub utility is an offline version of nodetool scrub. It attempts to remove the corrupted parts while preserving non-corrupted data. Before using sstablescrub, try rebuilding the tables using nodetool scrub. If nodetool scrub does not fix the problem, use this utility. Because it runs offline, sstablescrub can correct errors that nodetool scrub cannot. After running this utility, you must perform a repair because corrupted rows are thrown away. If scrubbing results in dropping rows, new SSTables become unrepaired, however, if no bad rows are detected, the SSTable keeps its original repairedAt field, which denotes the time of the repair. Usage: • • Package installations: sstablescrub [options] <keyspace> <table> Tarball installations: install_location/bin/sstablescrub [options] <keyspace> <table> Table 15: Options Flag -h Option Description --debug Display stack traces. --help Display help. 195 Cassandra tools Flag Option Description -m --manifest-check Only check and repair the leveled manifest, without actually scrubbing the SSTables. -s --skip-corrupted Skip corrupt rows in counter tables. -v --verbose Verbose output. The sstablesplit utility Use this tool to split SSTables files into multiple SSTables of a maximum designated size. Cassandra must be stopped to use this tool: • Package installations: • $ sudo service cassandra stop Tarball installations: $ ps auwx | grep cassandra $ sudo kill pid Usage: • • Package installations: sstablessplit [options] <filename> [<filename>]* Tarball installations: install_location/tools/bin/sstablessplit [options] <filename> [<filename>]* Example: $ sstablesplit -s 40 /var/lib/cassandra/data/Keyspace1/Standard1/* Table 16: Options Flag Option Description --debug Display stack traces. --help Display help. --no-snapshot Do not snapshot the SSTables before splitting. -s --size <size> Maximum size in MB for the output SSTables (default: 50). -v --verbose Verbose output. -h The sstablekeys utility The sstablekeys utility dumps table keys. About this task To list the keys in an SSTable, find the name of the SSTable file. The file is located in the data directory and has a .db extension. The location of the data directory, listed in the "Install locations" section, depends on the type of installation. After finding the name of the file, use the name as an argument to the sstablekeys command. $ bin/sstablekeys <sstable_name> 196 Cassandra tools Procedure 1. Create the playlists table in the music keyspace as shown in Data modeling. 2. Insert the row of data about ZZ Top in playlists: INSERT INTO music.playlists (id, song_order, song_id, title, artist, album) VALUES (62c36092-82a1-3a00-93d1-46196ee77204, 1, a3e64f8f-bd44-4f28-b8d9-6938726e34d4, 'La Grange', 'ZZ Top', 'Tres Hombres'); 3. Flush the data to disk. $ nodetool flush music playlists 4. Look at keys in the SSTable data. For example, use sstablekeys followed by the path to the data. Use the path to data for your Cassandra installation: $ sstablekeys <path to data>/data/data/music/ playlists-8b9f4cc0229211e4b02073ded3cb6170/music-playlists-ka-1-Data.db The output appears, for example: 62c3609282a13a0093d146196ee77204 The sstableupgrade tool Upgrade the SSTables in the specified table (or snapshot) to match the current version of Cassandra. About this task This tool rewrites the SSTables in the specified table to match the currently installed version of Cassandra. If restoring with sstableloader, you must upgrade your snapshots before restoring for any snapshot taken in a major version older than the major version that Cassandra is currently running. Usage: • • Package installations: sstableupgrade [options] <keyspace> <cf> [snapshot] Tarball installations: install_location/bin/sstableupgrade [options] <keyspace> <cf> [snapshot] The snapshot option only upgrades the specified snapshot. Table 17: Options Flag -h Option Description --debug Display stack traces. --help Display help. 197 References References Starting and stopping Cassandra Starting Cassandra as a service Start the Cassandra Java server process for packaged installations. About this task Startup scripts are provided in /etc/init.d. The service runs as the cassandra user. Procedure You must have root or sudo permissions to start Cassandra as a service. On initial start-up, each node must be started one at a time, starting with your seed nodes: $ sudo service cassandra start On Enterprise Linux systems, the Cassandra service runs as a java process. Starting Cassandra as a stand-alone process Start the Cassandra Java server process for tarball installations. Procedure On initial start-up, each node must be started one at a time, starting with your seed nodes. • To start Cassandra in the background: • $ cd install_location $ bin/cassandra To start Cassandra in the foreground: $ cd install_location $ bin/cassandra -f Stopping Cassandra as a service Stop the Cassandra Java server process on packaged installations. Procedure You must have root or sudo permissions to stop the Cassandra service: $ sudo service cassandra stop Stopping Cassandra as a stand-alone process Stop the Cassandra Java server process on tarball installations. Procedure Find the Cassandra Java process ID (PID), and then kill the process using its PID number: 198 References $ ps auwx | grep cassandra $ sudo kill pid Clearing the data as a service Remove all data from a package installation. Procedure To clear the data from the default directories: After stopping the service, run the following command: $ sudo rm -rf /var/lib/cassandra/* Clearing the data as a stand-alone process Remove all data from a tarball installation. Procedure To clear all data from the default directories, including the commitlog and saved_caches: 1. After stopping the process, run the following command from the install directory: $ cd install_location $ sudo rm -rf data/* 2. To clear the only the data directory: $ cd install_location $ sudo rm -rf data/data/* Install locations Tarball installation directories The configuration files are located in the following directories: Configuration Files Locations cassandra.yaml install_location/conf cassandra-topology.properties install_location/conf cassandra-rackdc.properties install_location/conf cassandra-env.sh install_location/conf cassandra.in.sh install_location/bin The binary tarball releases install into the installation directory. Directories Description data Files for commitlog, data, and saved_caches (unless set in cassandra.yaml) bin Utilities and start scripts conf Configuration files and environment settings 199 References Directories Description interface Thrift and Avro client APIs javadoc Cassandra Java API documentation lib JAR and license files tools Cassandra tools and sample cassandra.yaml files for stress testing. For DataStax Enterprise installs, see the documentation for your DataStax Enterprise version. Package installation directories The configuration files are located in the following directories: Configuration Files Locations cassandra.yaml /etc/cassandra cassandra-topology.properties /etc/cassandra cassandra-rackdc.properties /etc/cassandra cassandra-env.sh /etc/cassandra cassandra.in.sh /usr/share/cassandra The packaged releases install into these directories: Directories Description /var/lib/ cassandra Data directories /var/log/ cassandra Log directory /var/run/ cassandra Runtime files /usr/share/ cassandra Environment settings /usr/share/ cassandra/lib JAR files /usr/bin Optional utilities, such as sstablelevelreset, sstablerepairedset, and sstablesplit /usr/bin Binary files /usr/sbin /etc/cassandra Configuration files /etc/init.d Service startup script /etc/security/ limits.d Cassandra user limits /etc/default 200 References Directories Description /usr/share/ doc/cassandra/ examples Sample cassandra.yaml files for stress testing. For DataStax Enterprise installs, see the documentation for your DataStax Enterprise version. Cassandra include file To set environment variables (Linux only), Cassandra can use an include file, cassandra.in.sh. This file is located in: • • Tarball installations: install_location/bin/cassandra.in.sh Package installations: /usr/share/cassandra/cassandra.in.sh Cassandra-CLI utility (deprecated) Important: The CLI utility is deprecated and will be removed in Cassandra 3.0. For ease of use and performance, switch from Thrift and CLI to CQL and cqlsh. Keyspace attributes Cassandra stores storage configuration attributes in the system keyspace. You can set storage engine configuration attributes on a per-keyspace or per-table basis on the command line using the CassandraCLI utility. A keyspace must have a user-defined name, a replica placement strategy, and options that specify the number of copies per data center or node. name Required. The name for the keyspace. placement_strategy Required. Determines how Cassandra distributes replicas for a keyspace among nodes in the ring. Values are: • • SimpleStrategy or org.apache.cassandra.locator.SimpleStrategy NetworkTopologyStrategy org.apache.cassandra.locator.NetworkTopologyStrategy or NetworkTopologyStrategy requires a snitch to be able to determine rack and data center locations of a node. For more information about replication placement strategy, see Data replication. strategy_options Specifies configuration options for the chosen replication strategy class. The replication factor option is the total number of replicas across the cluster. A replication factor of 1 means that there is only one copy of each row on one node. A replication factor of 2 means there are two copies of each row, where each copy is on a different node. All replicas are equally important; there is no primary or master replica. As a general rule, the replication factor should not exceed the number of nodes in the cluster. However, you can increase the replication factor and then add the desired number of nodes. When the replication factor exceeds the number of nodes, writes are rejected, but reads are served as long as the desired consistency level can be met. For more information about configuring the replication placement strategy for a cluster and data centers, see Choosing keyspace replication options. durable_writes 201 References (Default: true) When set to false, data written to the keyspace bypasses the commit log. Be careful using this option because you risk losing data. Table attributes The following attributes can be declared per table. bloom_filter_fp_chance See CQL properties in CQL for Cassandra 2.x. bucket_high See CQL Compaction Subproperties in CQL for Cassandra 2.x. bucket_low See CQL Compaction Subproperties in CQL for Cassandra 2.x. caching See CQL properties in CQL for Cassandra 2.x. chunk_length_kb See CQLCompression Subproperties in CQL for Cassandra 2.x. column_metadata (Default: N/A - container attribute) Column metadata defines these attributes of a column: • • • • name: Binds a validation_class and (optionally) an index to a column. validation_class: Type used to check the column value. index_name: Name of the index. index_type: Type of index. Currently the only supported value is KEYS. Setting a value for the name option is required. The validation_class is set to the default_validation_class of the table if you do not set the validation_class option explicitly. The value of index_type must be set to create an index for a column. The value of index_name is not valid unless index_type is also set. Setting and updating column metadata with the Cassandra-CLI utility requires a slightly different command syntax than other attributes; note the brackets and curly braces in this example: [default@demo ] UPDATE COLUMN FAMILY users WITH comparator =UTF8Type AND column_metadata =[{column_name: full_name, validation_class: UTF8Type, index_type: KEYS }]; column_type (Default: Standard) The standard type of table contains regular columns. comment See CQL properties in CQL for Cassandra 2.x. compaction_strategy See compaction in CQL properties in CQL for Cassandra 2.x. compaction_strategy_options (Default: N/A - container attribute) Sets attributes related to the chosen compaction-strategy. Attributes are: • • • • • • • • 202 bucket_high bucket_low max_compaction_threshold min_compaction_threshold min_sstable_size sstable_size_in_mb tombstone_compaction_interval tombstone_threshold References comparator (Default: BytesType) Defines the data types used to validate and sort column names. There are several built-in column comparators available. The comparator cannot be changed after you create a table. compression_options (Default: N/A - container attribute) Sets the compression algorithm and sub-properties for the table. Choices are: • • • sstable_compression chunk_length_kb crc_check_chance crc_check_chance See CQLCompression Subproperties in CQL for Cassandra 2.x. default_time_to_live See CQL properties in CQL for Cassandra 2.x. default_validation_class (Default: N/A) Defines the data type used to validate column values. There are several built-in column validators available. gc_grace See CQL properties in CQL for Cassandra 2.x. index_interval See CQL properties in CQL for Cassandra 2.x. key_validation_class (Default: N/A) Defines the data type used to validate row key values. There are several built-in key validators available, however CounterColumnType (distributed counters) cannot be used as a row key validator. max_compaction_threshold See max_threshold in CQL Compaction Subproperties in CQL for Cassandra 2.x. min_compaction_threshold See min_threshold in CQL Compaction Subproperties in CQL for Cassandra 2.x. max_index_interval See CQL properties in CQL for Cassandra 2.x. min_index_interval See CQL properties in CQL for Cassandra 2.x. memtable_flush_after_mins Deprecated as of Cassandra 1.0, but can still be declared for backward compatibility. Use commitlog_total_space_in_mb. memtable_flush_period_in_ms See CQL properties in CQL for Cassandra 2.x. memtable_operations_in_millions Deprecated as of Cassandra 1.0, but can still be declared for backward compatibility. Use commitlog_total_space_in_mb. memtable_throughput_in_mb Deprecated as of Cassandra 1.0, but can still be declared for backward compatibility. Use commitlog_total_space_in_mb. min_sstable_size See CQL Compaction Subproperties in CQL for Cassandra 2.x. name (Default: N/A) Required. The user-defined name of the table. 203 References read_repair_chance See CQL properties in CQL for Cassandra 2.x. speculative_retry See CQL properties in CQL for Cassandra 2.x. sstable_size_in_mb See CQL Compaction Subproperties in CQL for Cassandra 2.x. sstable_compression See compression in CQL properties in CQL for Cassandra 2.x. tombstone_compaction_interval See CQL Compaction Subproperties in CQL for Cassandra 2.x. tombstone_threshold See CQL Compaction Subproperties in CQL for Cassandra 2.x. 204 Moving data to or from other databases Moving data to or from other databases Cassandra offers several solutions for migrating from other databases: • • The COPY command, which mirrors what the PostgreSQL RDBMS uses for file/export import. The Cassandra bulk loader provides the ability to bulk load external data into a cluster. About the COPY command You can use COPY in Cassandra’s CQL shell to load flat file data into Cassandra (nearly all RDBMS’s have unload utilities that allow table data to be written to OS files) as well as data to be written out to OS files. ETL Tools If you need more sophistication applied to a data movement situation (more than just extract-load), then you can use any number of extract-transform-load (ETL) solutions that now support Cassandra. These tools provide excellent transformation routines that allow you to manipulate source data in literally any way you need and then load it into a Cassandra target. They also supply many other features such as visual, point-and-click interfaces, scheduling engines, and more. Many ETL vendors who support Cassandra supply community editions of their products that are free and able to solve many different use cases. Enterprise editions are also available that supply many other compelling features that serious enterprise data users need. You can freely download and try ETL tools from Jaspersoft, Pentaho, and Talend that all work with community Cassandra. 205 Troubleshooting Troubleshooting This section contains the following topics: Peculiar Linux kernel performance problem on NUMA systems Problems due to zone_reclaim_mode. The Linux kernel can be inconsistent in enabling/disabling zone_reclaim_mode. This can result in odd performance problems: • • • • Random huge CPU spikes resulting in large increases in latency and throughput. Programs hanging indefinitely apparently doing nothing. Symptoms appearing and disappearing suddenly. After a reboot, the symptoms generally do not show again for some time. To ensure that zone_reclaim_mode is disabled: $ echo 0 > /proc/sys/vm/zone_reclaim_mode Reads are getting slower while writes are still fast The cluster's IO capacity is not enough to handle the write load it is receiving. Check the SSTable counts in cfstats. If the count is continually growing, the cluster's IO capacity is not enough to handle the write load it is receiving. Reads have slowed down because the data is fragmented across many SSTables and compaction is continually running trying to reduce them. Adding more IO capacity, either via more machines in the cluster, or faster drives such as SSDs, will be necessary to solve this. If the SSTable count is relatively low (32 or less) then the amount of file cache available per machine compared to the amount of data per machine needs to be considered, as well as the application's read pattern. The amount of file cache can be formulated as (TotalMemory – JVMHeapSize) and if the amount of data is greater and the read pattern is approximately random, an equal ratio of reads to the cache:data ratio will need to seek the disk. With spinning media, this is a slow operation. You may be able to mitigate many of the seeks by using a key cache of 100%, and a small amount of row cache (10000-20000) if you have some hot rows and they are not extremely large. Nodes seem to freeze after some period of time Some portion of the JVM is being swapped out by the operating system (OS). Check your system.log for messages from the GCInspector. If the GCInspector is indicating that either the ParNew or ConcurrentMarkSweep collectors took longer than 15 seconds, there is a high probability that some portion of the JVM is being swapped out by the OS. One way this might happen is if the mmap DiskAccessMode is used without JNA support. The address space will be exhausted by mmap, and the OS will decide to swap out some portion of the JVM that isn't in use, but eventually the JVM will try to GC this space. Adding the JNA libraries will solve this (they cannot be shipped with Cassandra due to carrying a GPL license, but are freely available) or the DiskAccessMode can be switched to mmap_index_only, which as the name implies will only mmap the indices, using much less address space. DataStax strongly recommends that you disable swap entirely (sudo swapoff --all). Because Cassandra has multiple replicas and transparent failover, it is preferable for a replica to be killed 206 Troubleshooting immediately when memory is low rather than go into swap. This allows traffic to be immediately redirected to a functioning replica instead of continuing to hit the replica that has high latency due to swapping. If your system has a lot of DRAM, swapping still lowers performance significantly because the OS swaps out executable code so that more DRAM is available for caching disks. To make this change permanent, remove all swap file entries from /etc/fstab. If you insist on using swap, you can set vm.swappiness=1. This allows the kernel swap out the absolute least used parts. If the GCInspector isn't reporting very long GC times, but is reporting moderate times frequently (ConcurrentMarkSweep taking a few seconds very often) then it is likely that the JVM is experiencing extreme GC pressure and will eventually OOM. See the section below on OOM errors. Nodes are dying with OOM errors Nodes are dying with OutOfMemory exceptions. Check for these typical causes: Row cache is too large, or is caching large rows Row cache is generally a high-end optimization. Try disabling it and see if the OOM problems continue. The memtable sizes are too large for the amount of heap allocated to the JVM You can expect N + 2 memtables resident in memory, where N is the number of tables. Adding another 1GB on top of that for Cassandra itself is a good estimate of total heap usage. If none of these seem to apply to your situation, try loading the heap dump in MAT and see which class is consuming the bulk of the heap for clues. Nodetool or JMX connections failing on remote nodes Nodetool commands can be run locally but not on other nodes in the cluster. If you can run nodetool commands locally but not on other nodes in the ring, you may have a common JMX connection problem that is resolved by adding an entry like the following in install_location/conf/ cassandra-env.sh on each node: JVM_OPTS = "$JVM_OPTS -Djava.rmi.server.hostname=<public name>" If you still cannot run nodetool commands remotely after making this configuration change, do a full evaluation of your firewall and network security. The nodetool utility communicates through JMX on port 7199. Handling schema disagreements Check for and resolve schema disagreements. About this task In the event that a schema disagreement occurs, check for and resolve schema disagreements as follows: Procedure 1. Run the nodetool describecluster command. $ bin/nodetool describecluster If any node is UNREACHABLE, you see output something like this: 207 Troubleshooting $ bin/nodetool describecluster Snitch: org.apache.cassandra.locator.DynamicEndpointSnitch Partitioner: org.apache.cassandra.dht.Murmur3Partitioner Schema versions: UNREACHABLE: 1176b7ac-8993-395d-85fd-41b89ef49fbb: [10.202.205.203] 9b861925-1a19-057c-ff70-779273e95aa6: [10.80.207.102] 8613985e-c49e-b8f7-57ae-6439e879bb2a: [10.116.138.23] 2. Restart unreachable nodes. 3. Repeat steps 1 and 2 until nodetool describecluster shows that all nodes have the same schema version number#only one schema version appears in the output. View of ring differs between some nodes Indicates that the ring is in a bad state. This situation can happen when not using virtual nodes (vnodes) and there are token conflicts (for instance, when bootstrapping two nodes simultaneously with automatic token selection.) Unfortunately, the only way to resolve this is to do a full cluster restart. A rolling restart is insufficient since gossip from nodes with the bad state will repopulate it on newly booted nodes. Java reports an error saying there are too many open files Java may not have open enough file descriptors. Cassandra generally needs more than the default (1024) amount of file descriptors. To increase the number of file descriptors, change the security limits on your Cassandra nodes as described in the Recommended Settings section of Insufficient user resource limits errors. Another, much less likely possibility, is a file descriptor leak in Cassandra. Run lsof -n | grep java to check that the number of file descriptors opened by Java is reasonable and reports the error if the number is greater than a few thousand. Insufficient user resource limits errors Insufficient resource limits may result in a number of errors in Cassandra and OpsCenter. Cassandra errors Insufficient as (address space) or memlock setting ERROR [SSTableBatchOpen:1 ] 2012-07-25 AbstractCassandraDaemon.java (line 139) Fatal exception in thread Thread [SSTableBatchOpen:1,5,main ] java.io.IOError: java.io.IOException: Map failed at ... 15:46:02,913 Insufficient memlock settings WARN [main ] 2011-06-15 09:58:56,861 CLibrary.java (line 118) Unable to lock JVM memory (ENOMEM). This can result in part of the JVM being swapped out, especially with mmapped I/O enabled. Increase RLIMIT_MEMLOCK or run Cassandra as root. Insufficient nofiles setting WARN 05:13:43,644 Transport error occurred during acceptance of message. org.apache.thrift.transport.TTransportException: java.net.SocketException: Too many open files ... 208 Troubleshooting Insufficient nofiles setting ERROR [MutationStage:11 ] 2012-04-30 09:46:08,102 AbstractCassandraDaemon.java (line 139) Fatal exception in thread Thread [MutationStage:11,5,main ] java.lang.OutOfMemoryError: unable to create new native thread Recommended settings You can view the current limits using the ulimit -a command. Although limits can also be temporarily set using this command, DataStax recommends making the changes permanent: Packaged installs: Ensure that the following settings are included in the /etc/security/limits.d/ cassandra.conf file: cassandra cassandra cassandra cassandra - memlock unlimited nofile 100000 nproc 32768 as unlimited Tarball installs: Ensure that the following settings are included in the /etc/security/limits.conf file: * * * * - memlock unlimited nofile 100000 nproc 32768 as unlimited If you run Cassandra as root, some Linux distributions such as Ubuntu, require setting the limits for root explicitly instead of using *: root root root root - memlock unlimited nofile 100000 nproc 32768 as unlimited For CentOS, RHEL, OEL systems, also set the nproc limits in /etc/security/limits.d/90nproc.conf: * - nproc 32768 For all installations, add the following line to /etc/sysctl.conf: vm.max_map_count = 131072 To make the changes take effect, reboot the server or run the following command: $ sudo sysctl -p To confirm the limits are applied to the Cassandra process, run the following command where pid is the process ID of the currently running Cassandra process: $ cat /proc/<pid>/limits OpsCenter errors See the OpsCenter Troubleshooting documentation. Cannot initialize class org.xerial.snappy.Snappy An error may occur when Snappy compression/decompression is enabled although its library is available from the classpath. java.util.concurrent.ExecutionException: java.lang.NoClassDefFoundError: Could not initialize class org.xerial.snappy.Snappy ... 209 Troubleshooting Caused by: java.lang.NoClassDefFoundError: Could not initialize class org.xerial.snappy.Snappy at org.apache.cassandra.io.compress.SnappyCompressor.initialCompressedBufferLength (SnappyCompressor.java:39) The native library snappy-1.0.4.1-libsnappyjava.so for Snappy compression is included in the snappy-java-1.0.4.1.jar file. When the JVM initializes the JAR, the library is added to the default temp directory. If the default temp directory is mounted with a noexec option, it results in the above exception. One solution is to specify a different temp directory that has already been mounted without the noexec option, as follows: • • If you use the DSE/Cassandra command $_BIN/dse cassandra or $_BIN/cassandra, simply append the command line: • DSE: bin/dse cassandra -t -Dorg.xerial.snappy.tempdir=/path/to/newtmp • Cassandra: bin/cassandra -Dorg.xerial.snappy.tempdir=/path/to/newtmp If starting from a package using service dse start or service cassandra start, add a system environment variable JVM_OPTS with the value: JVM_OPTS=-Dorg.xerial.snappy.tempdir=/path/to/newtmp The default cassandra-env.sh looks for the variable and appends to it when starting the JVM. Firewall idle connection timeout causing nodes to lose communication during low traffic times About this task During low traffic intervals, a firewall configured with an idle connection timeout can close connections to local nodes and nodes in other data centers. The default idle connection timeout is usually 60 minutes and configurable by the network administrator. Procedure To prevent connections between nodes from timing out, set the TCP keep alive variables: 1. Get a list of available kernel variables: $ sysctl -A | grep net.ipv4 The following variables should exist: • net.ipv4.tcp_keepalive_time • Time of connection inactivity after which the first keep alive request is sent. net.ipv4.tcp_keepalive_probes • Number of keep alive requests retransmitted before the connection is considered broken. net.ipv4.tcp_keepalive_intvl Time interval between keep alive probes. 2. To change these settings: $ sudo sysctl -w net.ipv4.tcp_keepalive_time=60 net.ipv4.tcp_keepalive_probes=3 net.ipv4.tcp_keepalive_intvl=10 This sample command changes TCP keepalive timeout to 60 seconds with 3 probes, 10 seconds gap between each. This setting detects dead TCP connections after 90 seconds (60 + 10 + 10 + 10). There 210 Troubleshooting is no need to be concerned about the additional traffic as it's negligible and permanently leaving these settings shouldn't be an issue. 211 DataStax Community release notes DataStax Community release notes Key features of Cassandra 2.1 were described earlier in this document. The CHANGES.txt file installed with Cassandra 2.1 covers changes in detail. Some of the noteworthy changes include: • • • • • • • • • • • Cassandra 2.1 does not support pre-Cassandra 2.0 SSTables. To upgrade to Cassandra 2.1 from a previous release that stored data in Cassandra 1.2.x SSTables, start the node on Cassandra 2.0 and use the sstableupgrade tool after upgrading. Upgrade SSTables even if you do not perform a rolling upgrade. Resolve schema disagreements if any exist, and restart each node. For more upgrade information, see "Upgrading Cassandra" and NEWS.txt. The shuffle utility for migrating to virtual nodes (vnodes) and the nodetool taketoken command have been removed. To migrate to vnodes, bootstrap a new data center. Cassandra 2.1 bundles and enables JNA. If JNA fails to initialize, you can disable JNA by using the Dcassandra.boot_without_jna=true option to start Cassandra. Cassandra rejects USING TIMESTAMP or USING TTL in the command to update a counter column, and now generates an error message when you attempt such an operation. Configurable properties have been added to manage counter writes. A configurable counter cache reduces lock contention and helps with concurrency. In Cassandra 2.1, the CQL table property index_interval is replaced by min_index_interval and max_index_interval. The max_index_interval is 2048 by default. The default would be reached only when SSTables are infrequently-read and the index summary memory pool is full. When upgrading from earlier releases, Cassandra uses the old index_interval value for the min_index_interval. CASSANDRA-6504 has been backported to Cassandra 2.0.5 so you can perform a rolling upgrade of a database having counters to Cassandra 2.1. Default data and log locations have changed for tarball installations and source checkouts. By default, the data file directory, commitlog directory, and saved caches directory are in $CASSANDRA_HOME/ data/data, $CASSANDRA_HOME/data/commitlog, and $CASSANDRA_HOME/data/ saved_caches, respectively. The log directory now defaults to $CASSANDRA_HOME/logs. If not set, $CASSANDRA_HOME, defaults to the top-level directory of the installation. Deb and RPM packages continue to use /var/lib/cassandra and /var/log/cassandra by default. Cassandra 2.1 maintains data consistency during bootstrapping. As you bootstrap a new node, Cassandra streams the data for the new node from an existing node that is free from range movement. If data inconsistency issues are present in the cluster, the improvement to bootstrapping handles these issues. Data inconsistency commonly occurs after frequent data deletions and a node going down. To inhibit the new Cassandra 2.1 bootstrapping behavior, and make Cassandra 2.0 behavior effective, start the node using the -Dconsistent.rangemovement=false property: • • Package installations: Add the following option to /usr/share/cassandra/cassandra-env.sh file: JVM_OPTS="$JVM_OPTS -Dconsistent.rangemovement=false Tarball installations: Start Cassandra with this option: $ bin/cassandra -Dconsistent.rangemovement=false To replace a dead node, you also need to specify the address of the node from which Cassandra streams the data. For a complete list of fixes and new features, see the Apache Cassandra 2.1.0 CHANGES.txt. You can view all version changes by branch or tag in the branch drop-down list: 212 DataStax Community release notes 213 Tips for using DataStax documentation Tips for using DataStax documentation Navigating the documents To navigate, use the table of contents or search in the left navigation bar. Additional controls are: Hide or display the left navigation. Go back or forward through the topics as listed in the table of contents. Toggle highlighting of search terms. Print page. See doc tweets and provide feedback. Grab to adjust the size of the navigation pane. Appears on headings for bookmarking. Right-click the ¶ to get the link. Toggles the legend for CQL statements and nodetool options. Other resources You can find more information and help at: • • • • • • 214 Documentation home page Datasheets Webinars Whitepapers Developer blogs Support Back pressure Back pressure Pausing or blocking the buffering of incoming requests after reaching the threshold until the internal processing of buffered requests catches up. 215 ">
/
Atsisiųsti
Tiesiog draugiškas priminimas. Dokumentą galite peržiūrėti tiesiog čia. Bet svarbiausia, kad mūsų AI jau jį perskaitė. Jis gali paaiškinti sudėtingus dalykus paprastais terminais, atsakyti į jūsų klausimus bet kuria kalba ir padėti greitai naršyti net ilgiausius ar sudėtingiausius dokumentus.
Vieša nuoroda atnaujinta
Vieša nuoroda į jūsų pokalbį buvo atnaujinta. You may view and manage your chat links after registration here.
Dokumento vieša nuoroda
Reklama
