advertisement
LPT-C2-01
ListenPoint Standard Control Unit
Configuration:
LPT-C2-01 ListenPoint
Standard Control Unit
(North America)*
LPT-C2-02 ListenPoint
Standard Control Unit
(Asia, UK)*
LPT-C2-03 ListenPoint
Standard Control Unit
(Euro)*
LPT-C2-04 ListenPoint
Standard Control Unit
(Australia)*
*01, 02, 03, and 04 designation refers to international plug type
(type B, G, C, and I) for the power supply.
Product Overview:
The C2 ListenPoint Control Unit is the heart of a ListenPoint system offering two audio inputs. It's simple and easy for teachers with one, intuitive control for adjusting volume. Active audio sources are automatically selected so teachers can either use the single control on the control unit or on the M1 microphone to change volume - SIMPLE! The Control Unit connects to the Room Module using a single Cat-5e cable. Extensive customization of system through password protected front panel or via USB port. The backlit, tilting LCD is easy to read and displays the status of all microphones on the system including battery level. The C2 delivers outstanding performance on a budget. Designed to blend into any room, the control unit can be wall, desk or rack mounted.
Highlights:
• Two (2) unbalanced inputs and one (1) unbalanced output
• One intuitive control for adjusting volume
• Automatic audio selection allows teacher to change volume via the single control on the control unit or on the M1 microphone
• Single point of connection via Cat-5e cabling to the room module makes installation and maintenance simple
• Backlit, tilting LCD Screen shows audio selection, volume, microphone status and battery level. When mounted the LCD can be inverted 180° for optimum viewing angle
• Designed to blend into any room, can be wall, desk or rack mounted with supplied mounting platform and hardware
• Extensive customization of system through password protected front panel or via USB port
Includes:
One (1) LPT-C2 ListenPoint Standard Control Unit
One (1) LPT-A102 Mounting Platform
Mounting Hardware
Four (4) #6 Long Screws
Four (4) #6 Short Screws
Four (4) #8 Long Screws
Four (4) #8 Wall Anchors
One (1) LPT-A112 19 VDC Universal Power Supply
One (1) Power Cord
One (1) Quick Reference Card
One (1) Installation Guide
Architectural Specification:
The control unit shall be capable of accepting two (2) unbalanced stereo inputs. The unit shall incorporate a single digital rotary control and LCD display for selecting audio, setting volume, system customization, and status of the microphones. The control unit shall incorporate automatic audio selection of audio sources and microphones connected to the system shall control the volume of such source. The unit shall be connected to a corresponding room module using a standard Cat-5e cable. The unit shall be capable of being configured via a USB port. The unit shall be capable of being mounted on wall or table by means of a snap in platform and shall be wall, desk, or rack mountable. The ListenPoint LPT-C2 Control Unit is specified.
Product Specification:ListenPoint Standard Control Unit
ListenPoint Standard Control Unit
Listen Technologies Corporation * 14912 Heritage Crest Way * Bluffdale * Utah 84065-4818 U.S.A.
+1.801.233.8992 * +1.800.330.0891 North America * +1.801.233.8995 Fax
Listen Technologies Corporation All rights reserved 91407 - Created April 8, 2016
Page 1 2
LPT-C2-01
ListenPoint Standard Control Unit
Power Supply Input
Power Supply Connector
Power Supply Output
Cord
Power Cord Length
Unbalanced Output
Unbalanced Input
Headphone Output Power
Input to Output Frequency Response
Microphone to Output Frequency Response
Front Panel
Rear Panel
Control Unit
Power Supply Compliance
Mounting
Mounting
Weight
Shipping Weight
Dimensions (H x W x D)
Mounting Platform and Cable Cover Dimensions (H x
Power Supply Dimensions (H x W x D)
Power
100-240 VAC, 50-60 Hz
DC Plug type Connector, .2 in (5.5 mm) OD, center positive
19 VDC, 3.2 A, 60.8 w
Line cord is determined by each country's AC power standards.
6.0 ft. (1.8 m)
Audio
One (1) Dual Mono Output, Phono Connector, -10dBu, 10 Ohm
Two (2) Stereo inputs via phono connectors, unbalanced, -10dBu nominal input level, +2 dBu maximum, adjustable -30/+12dB, impedance 100k Ohms.
One (1) 3.5 mm stereo connector, unbalanced, adjustable output level, +10 dBu maximum, impedance
10 Ohm.
20 Hz to 20 kHz, +/- 2 dB, < 2.0% THD, >75 dB SNR
200 Hz to 15 kHz, +/- 2 dB, < 2.0% THD, >75 dB SNR
Controls
Power Button, LCD, Control Dial, Headphone Level
USB , CAT-5e Output w/ LED indicator, Power Input, System Reset
Compliance
CE, ROHS, FCC, Industry Canada
UL, CE, ROHS, FCC, Industry Canada
Physical
Control Unit: Mounting platform provided for wall, desk, electrical boxes.
Cable Cover: Mounts to mounting platform.
1.5 lbs. (.68 kg)
3.0 lbs. (1.36 kg)
1.5 x 8.5 x 6.9 in. (3.8 x 20.4 x 17.5 cm)
1.9 x 8.5 x 9.8 in. (4.7 x 20.4 x 24.9 cm)
1.3 x 2.4 x 4.8 in. (34 x 60 x 122 cm)
ListenPoint Standard Control Unit
Listen Technologies Corporation * 14912 Heritage Crest Way * Bluffdale * Utah 84065-4818 U.S.A.
+1.801.233.8992 * +1.800.330.0891 North America * +1.801.233.8995 Fax
Listen Technologies Corporation All rights reserved 91407 - Created April 8, 2016
Page 2 2
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement